- 29 Nov, 2010 40 commits
-
-
Randy Dunlap authored
SND_INTELMID selects 3 SND_* kconfig symbols, but that is useless if the SOUND & SND symbols in their hierarchy are not enabled, so make this symbol depend on SOUND & SND. ERROR: "snd_pcm_period_elapsed" [drivers/staging/intel_sst/snd-intelmid.ko] undefined! ERROR: "snd_card_create" [drivers/staging/intel_sst/snd-intelmid.ko] undefined! ERROR: "snd_pcm_hw_constraint_integer" [drivers/staging/intel_sst/snd-intelmid.ko] undefined! ERROR: "snd_device_new" [drivers/staging/intel_sst/snd-intelmid.ko] undefined! ERROR: "snd_pcm_set_ops" [drivers/staging/intel_sst/snd-intelmid.ko] undefined! ERROR: "snd_jack_new" [drivers/staging/intel_sst/snd-intelmid.ko] undefined! ERROR: "snd_pcm_lib_free_pages" [drivers/staging/intel_sst/snd-intelmid.ko] undefined! ERROR: "snd_pcm_lib_ioctl" [drivers/staging/intel_sst/snd-intelmid.ko] undefined! ERROR: "snd_pcm_lib_malloc_pages" [drivers/staging/intel_sst/snd-intelmid.ko] undefined! ERROR: "snd_ctl_new1" [drivers/staging/intel_sst/snd-intelmid.ko] undefined! ERROR: "snd_pcm_lib_preallocate_pages_for_all" [drivers/staging/intel_sst/snd-intelmid.ko] undefined! ERROR: "snd_card_free" [drivers/staging/intel_sst/snd-intelmid.ko] undefined! ERROR: "snd_card_register" [drivers/staging/intel_sst/snd-intelmid.ko] undefined! ERROR: "snd_jack_report" [drivers/staging/intel_sst/snd-intelmid.ko] undefined! ERROR: "snd_pcm_new" [drivers/staging/intel_sst/snd-intelmid.ko] undefined! ERROR: "snd_ctl_add" [drivers/staging/intel_sst/snd-intelmid.ko] undefined! Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Brett Rudley authored
BUSTYPE isn't used in this configuration. Signed-off-by:
Brett Rudley <brudley@broadcom.com> Signed-off-by:
-
Arend van Spriel authored
The variable dhd_ops_virt was used before although its use was rather limited as can be found in previous commit: | commit 4fd68ae1 | Author: Julia Lawall <julia@diku.dk> | Date: Tue Oct 26 12:25:33 2010 +0200 | | drivers/staging/brcm80211/brcmfmac/dhd_linux.c: delete double assignment | Reviewed-by:
Roland Vossen <rvossen@broadcom.com> Reviewed-by:
Arend van Spriel <arend@broadcom.com> Signed-off-by:
-
Arend van Spriel authored
macros PKTHEADROOM and PKTTAILROOM have been replaced by native skbuff functions and macros PKTALLOCED and PKTUNALLOC have been removed. Reviewed-by:
-
Arend van Spriel authored
With the packet storage type changed from void pointer to struct sk_buff pointer there is no need for macros for accessing these fields through casting. These can now be accessed directly. Reviewed-by:
-
Arend van Spriel authored
The packet queues now store struct sk_buff pointer and subsequently all driver code handling packets now use struct sk_buff as package storage type. Next step will be getting rid of packet macros. Reviewed-by:
-
Arend van Spriel authored
The prototype for function pktsegcnt in bmcutils.h is not defined nor used anywhere in the driver so it can be removed. Reviewed-by:
-
Arend van Spriel authored
Source wl_iw.c uses semaphore definitions and as such should include <linux/semaphore.h>. Signed-off-by:
-
Brett Rudley authored
Replace OSL layer PCI READ/WRITE macros with native calls. Signed-off-by:
-
Greg Kroah-Hartman authored
-
Greg Kroah-Hartman authored
The Kconfig file should not have 'y' as the default, especially as the driver will crash a machine if it is loaded and the hardware is not present. Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Cc: Mark Allyn <mark.a.allyn@intel.com> Cc: Alan Cox <alan@linux.intel.com> Signed-off-by:
-
Greg Kroah-Hartman authored
The Kconfig file should not have 'y' as the default, especially as the driver will crash a machine if it is loaded and the hardware is not present. Cc: Mark Allyn <mark.a.allyn@intel.com> Cc: Alan Cox <alan@linux.intel.com> Signed-off-by: -
Alan Cox authored
The existing code works mostly by luck. The PCI probe is done by the register and completes before the register returns thus allowing the other init code to run in time. Without a SEP or if unlucky this doesn't occur and you get an OOPS which for some reason causes grumpiness. As the season of good b^Hcheer is supposed to be approaching we should probably fix it. Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
Alan Cox authored
Another copy_user case and some formatting of dbg Signed-off-by:
-
Alan Cox authored
So use can't instead. Signed-off-by:
-
Alan Cox authored
SEP is initials so make it consistent in the driver, ditto DMA and DCB Consistent capitalisation of comment leads Signed-off-by:
-
Alan Cox authored
Signed-off-by:
-
Alan Cox authored
Various assignments are done but not used dev_dbg formatting is a bit weird and wraps when not needed Take out some of the blank lines and reformat a bit to reduce view size Remove some comments that are obvious Fix else formatting Remove some user triggerable dev_warns Fix copy_from_user error return cases (-EFAULT not bytes copied) Signed-off-by:
-
Alan Cox authored
The long blurb goes at the end Signed-off-by:
-
Alan Cox authored
This is called on a kmalloc/memset object. Remove everything that isn't a set to zero Oh look 8) Signed-off-by:
-
Alan Cox authored
Kill unused stuff Signed-off-by:
-
Alan Cox authored
Signed-off-by:
-
Alan Cox authored
SEP isn't the only driver that may need to handle both cases easily Signed-off-by:
-
Alan Cox authored
Signed-off-by:
-
Vinod Koul authored
This patch adds two new ioctls to intel_sst_ctrl device. This i/f can be used by application to send algorithm parameters Signed-off-by:
Vinod Koul <vinod.koul@intel.com> [This will need further discussion in the context of the final ALSA interface but is fine for staging, ie anyone who relies on it should expect changes Also fixed a missing kmalloc fail check] Signed-off-by:
-
Vinod Koul authored
The firmware name for each platform is appended by PCI id of device. This patch makes use of pci id to construct the string rather than hardcode the string. Signed-off-by:
-
Vinod Koul authored
This adds runtime PM support for audio driver. This also fixes LPA audio mode for moorestown platform Signed-off-by:
-
Sven Eckelmann authored
linux/etherdevice.h already provides functions to classify different ethernet addresses. These inlineable functions should be used instead of custom functions. The check for multicast together with multicast can also be replaced with a single test for multicast because for every ethernet address x following is always true: is_broadcast_ether_addr(x) => is_multicast_ether_addr(x) or when looking more at the implementation: (FF:FF:FF:FF:FF:FF == x) => [(01:00:00:00:00:00 & x) != 00:00:00:00:00:00] Reported-by:
Tobias Klauser <tklauser@distanz.ch> Signed-off-by:
Sven Eckelmann <sven.eckelmann@gmx.de> Signed-off-by:
-
Sven Eckelmann authored
The kernel headers already provide different versions of a min/max macro which should be used by all modules according to Documentation/CodingStyle. Signed-off-by:
-
Marek Lindner authored
Some additional checks will be needed in case of extension headers like the fragmentation or hop-by-hop (for jumbo frames for example) headers or ipsec stuff. But this patch should do for most people for now, the rest can be added with a later one. Signed-off-by:
Marek Lindner <lindner_marek@yahoo.de> Acked-by:
Linus Lüssing <linus.luessing@web.de> Signed-off-by:
-
Marek Lindner authored
The DHCP filter inspects packets to determine whether or not to send them via ethernet unicast. This patch adds 802.1Q (vlan) support for this check. Signed-off-by:
-
Marek Lindner authored
If the gateway client mode is active batman-adv will send the broadcasted DHCP requests via unicast to the currently selected best gateway. Therefore attached clients can profit from batman's knowledge about the network topology. Signed-off-by:
-
Marek Lindner authored
Via the /sys filesystem you can change the gateway mode of a node using gw_mode. Adjustments to it can be done using gw_bandwidth for server mode and gw_sel_class for client mode. Signed-off-by:
-
Sven Eckelmann authored
spin_lock_irqsave disables the IRQs and stores them inside the flags provided by the caller. This is needed to protect a bottom half handler or a user context critical section from being interrupted by an interrupt handler which also tries to acquire the spinlock and locks forever. The linux device drivers will receive the packets inside an interrupt handler and the network infrastructure will process them inside bottom half. Thus batman-adv will only run in user context and bottom half handlers. We can conclude that batman-adv doesn't share its own spinlocks with real interrupt handlers. This makes it possible to exchange the quite complex spin_lock_irqsave with spin_lock_bh which only stops bottom halves from running on the current cpu, but allows interrupt handlers to take over to keep the interrupt latency low. Signed-off-by:
-
Sven Eckelmann authored
The hash implementation is a complete implementation of a hash using buckets as hash entries and overflow buckets attached to them. The kernel already provides datastructures hlist_head and hlist_node which can be used to implement an hash using lists as hash buckets. So it is better to implement heavily used functionality on top of those instead of providing a full hash implementation. The rewrite changes the behavior of some functions slightly: * hash_add add elements to the front instead of the tail * hash_iterate doesn't provide pointer to access bucket->data directly, but it can be accessed using hlist_entry Reported-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Sven Eckelmann authored
hash_iterate is next to the function pointers the most called function related to hashes which benefits from inlining as it is uses in loops. Reported-by:
-
Sven Eckelmann authored
To enable inlining of the function pointers hashdata_choose_cb, hashdata_choose_cb and hashdata_free_cb, also the hash functions which uses them must be inlined by the called function. This should increase the performance, but also increases the size of the generated machine code slightly. Reported-by:
-
Sven Eckelmann authored
Function pointers cannot be inlined by a compiler and thus always has the overhead of an call. hashdata_choose_cb's are one of the most often called function pointers and its overhead must kept relative low. As first step, every function which uses this function pointer takes it as parameter instead of storing it inside the hash abstraction structure. This not generate any performance gain right now. The called functions must also be able to be inlined by the calling functions to enable inlining of the function pointer. Reported-by:
-
Sven Eckelmann authored
Function pointers cannot be inlined by a compiler and thus always has the overhead of an call. hashdata_compare_cb's are one of the most often called function pointers and its overhead must kept relative low. As first step, every function which uses this function pointer takes it as parameter instead of storing it inside the hash abstraction structure. This not generate any performance gain right now. The called functions must also be able to be inlined by the calling functions to enable inlining of the function pointer. Reported-by:
-
Linus Lüssing authored
When having a mixed topology of both very mobile and rather static nodes, you are usually best advised to set the originator interval on all nodes to a level best suited for the most mobile node. However, if most of the nodes are rather static, this can create a lot of undesired overhead as a trade-off then. If setting the interval too low on the static nodes, a mobile node might be chosen as a router for too long, not switching away from it fast enough because of its mobility and the low frequency of ogms of static nodes. Exposing the hop_penalty is especially useful for the stated scenario: A static node can keep the default originator interval, a mobile node can select a quicker one resulting in faster route updates towards this mobile node. Additionally, such a mobile node could select a higher hop penalty (or even set it to 255 to disable acting as a router for other nodes) to make it less desirable, letting other nodes avoid selecting this mobile node as a router. Signed-off-by:
Linus Lüssing <linus.luessing@ascom.ch> Signed-off-by:
-
