* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hch/hfsplus:
  hfsplus: fix up a comparism in hfsplus_file_extend
  hfsplus: fix two memory leaks in wrapper.c
  hfsplus: do not leak buffer on error
  hfsplus: fix failed mount handling

Revert an incorrect hunk from commit b2837fcf,

	"hfsplus: %L-to-%ll, macro correction, and remove unneeded braces"

revert a pointless change of comparism operation argument order, which turned
out to not even be equivalent.
Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Christoph Hellwig <hch@tuxera.com>

Signed-Off-By: Chuck Ebbert <cebbert@redhat.com>
Signed-off-by: Christoph Hellwig <hch@tuxera.com>

Signed-Off-By: Chuck Ebbert <cebbert@redhat.com>
Signed-off-by: Christoph Hellwig <hch@tuxera.com>

Currently the error handling in hfsplus_fill_super is a mess, and can
lead to accessing fields in the superblock that haven't been even set
up yet.  Fix this by making sure we do not set up sb->s_root until we
have the mount fully set up, and before that do proper step by step
unwinding instead of using hfsplus_put_super as a big hammer.
Reported-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: Christoph Hellwig <hch@tuxera.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
  [SCSI] libsas: fix runaway error handler problem
  [SCSI] fix incorrect value of SCSI_MAX_SG_CHAIN_SEGMENTS due to include file ordering
  [SCSI] arcmsr: Fix the issue of system hangup after commands timeout on ARC-1200
  [SCSI] mpt2sas: fix Integrated Raid unsynced on shutdown problem
  [SCSI] mpt2sas: Kernel Panic during Large Topology discovery
  [SCSI] mpt2sas: Fix the race between broadcast asyn event and scsi command completion
  [SCSI] mpt2sas: Correct resizing calculation for max_queue_depth
  [SCSI] mpt2sas: fix internal device reset for older firmware prior to MPI Rev K
  [SCSI] mpt2sas: Fix device removal handshake for zoned devices

Clearing the cpu in prev's mm_cpumask early will avoid the flush tlb
IPI's while the cr3 is still pointing to the prev mm.  And this window
can lead to the possibility of bogus TLB fills resulting in strange
failures.  One such problematic scenario is mentioned below.

 T1. CPU-1 is context switching from mm1 to mm2 context and got a NMI
     etc between the point of clearing the cpu from the mm_cpumask(mm1)
     and before reloading the cr3 with the new mm2.

 T2. CPU-2 is tearing down a specific vma for mm1 and will proceed with
     flushing the TLB for mm1.  It doesn't send the flush TLB to CPU-1
     as it doesn't see that cpu listed in the mm_cpumask(mm1).

 T3. After the TLB flush is complete, CPU-2 goes ahead and frees the
     page-table pages associated with the removed vma mapping.

 T4. CPU-2 now allocates those freed page-table pages for something
     else.

 T5. As the CR3 and TLB caches for mm1 is still active on CPU-1, CPU-1
     can potentially speculate and walk through the page-table caches
     and can insert new TLB entries.  As the page-table pages are
     already freed and being used on CPU-2, this page walk can
     potentially insert a bogus global TLB entry depending on the
     (random) contents of the page that is being used on CPU-2.

 T6. This bogus TLB entry being global will be active across future CR3
     changes and can result in weird memory corruption etc.

To avoid this issue, for the prev mm that is handing over the cpu to
another mm, clear the cpu from the mm_cpumask(prev) after the cr3 is
changed.

Marking it for -stable, though we haven't seen any reported failure that
can be attributed to this.
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: stable@kernel.org	[v2.6.32+]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  RDMA: Update missed conversion of flush_scheduled_work()
  RDMA/ucma: Copy iWARP route information on queries
  RDMA/amso1100: Fix compile warnings
  RDMA/cxgb4: Set the correct device physical function for iWARP connections
  RDMA/cxgb4: Limit MAXBURST EQ context field to 256B
  IB/qib: Hold link for TX SERDES settings
  mlx4_core: Add ConnectX-3 device IDs

Merge branch 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  genirq: Prevent irq storm on migration

Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: Fix update_curr_rt()
  sched, docs: Update schedstats documentation to version 15

Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf: Fix reading in perf_event_read()
  watchdog: Don't change watchdog state on read of sysctl
  watchdog: Fix sysctl consistency
  watchdog: Fix broken nowatchdog logic
  perf: Fix Pentium4 raw event validation
  perf: Fix alloc_callchain_buffers()

cpu_stopper_thread()
  migration_cpu_stop()
    __migrate_task()
      deactivate_task()
        dequeue_task()
          dequeue_task_rq()
            update_curr_rt()

Will call update_curr_rt() on rq->curr, which at that time is
rq->stop. The problem is that rq->stop.prio matches an RT prio and
thus falsely assumes its a rt_sched_class task.
Reported-Debuged-Tested-Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Cc: stable@kernel.org # .37
Signed-off-by: Ingo Molnar <mingo@elte.hu>

It is quite possible for the event to have been disabled between
perf_event_read() sending the IPI and the CPU servicing the IPI and
calling __perf_event_read(), hence revalidate the state.
Reported-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

This reverts commit 115e19c5.

Apparently setting inode->bdi to one's own sb->s_bdi stops VFS from
sending *read-aheads*.  This problem was bisected to this commit.  A
revert fixes it.  I'll investigate farther why is this happening for the
next Kernel, but for now a revert.

I'm sending to stable@kernel.org as well, since it exists also in
2.6.37.  2.6.36 is good and does not have this patch.

CC: Stable Tree <stable@kernel.org>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'media_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6:
  [media] fix saa7111 non-detection
  [media] rc/streamzap: fix reporting response times
  [media] mceusb: really fix remaining keybounce issues
  [media] rc: use time unit conversion macros correctly
  [media] rc/ir-lirc-codec: add back debug spew
  [media] ir-kbd-i2c: improve remote behavior with z8 behind usb
  [media] lirc_zilog: z8 on usb doesn't like back-to-back i2c_master_send
  [media] hdpvr: fix up i2c device registration
  [media] rc/mce: add mappings for missing keys
  [media] gspca - zc3xx: Discard the partial frames
  [media] gspca - zc3xx: Fix bad images with the sensor hv7131r
  [media] gspca - zc3xx: Bad delay when given by a table

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] reset default for CONFIG_CHSC_SCH
  [S390] qdio: prevent compile warning under CONFIG_32BIT
  [S390] use asm-generic/cacheflush.h
  [S390] tlb: fix build error caused by THP
  [S390] missing sacf in uaccess
  [S390] pgtable_list corruption
  [S390] dasd: prevent panic with unresumed devices

Some filesystems don't deal well with being asked to map less than
blocksize blocks (GFS2 for example).  Since we are always mapping at least
blocksize sections anyway, just make sure len is at least as big as a
blocksize so we don't trip up any filesystems.  Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

FMODE_EXEC is a constant type of fmode_t but was used with normal integer
constants.  This results in following warnings from sparse.  Fix it using
new macro __FMODE_EXEC.

 fs/exec.c:116:58: warning: restricted fmode_t degrades to integer
 fs/exec.c:689:58: warning: restricted fmode_t degrades to integer
 fs/fcntl.c:777:9: warning: restricted fmode_t degrades to integer
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

AND-ing FMODE_* constant with normal integer results in following
sparse warnings. Fix it.

 fs/open.c:662:21: warning: restricted fmode_t degrades to integer
 fs/anon_inodes.c:123:34: warning: restricted fmode_t degrades to integer
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Changes in e401f176 ("memcg: modify accounting function for supporting
THP better") adds nr_pages to support multiple page size in
memory_cgroup_charge_statistics.

But counting the number of event nees abs(nr_pages) for increasing
counters.  This patch fixes event counting.
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Huge page coverage should obviously have less priority than the continued
execution of a process.

Never kill a process when charging it a huge page fails.  Instead, give up
after the first failed reclaim attempt and fall back to regular pages.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

If reclaim after a failed charging was unsuccessful, the limits are
checked again, just in case they settled by means of other tasks.

This is all fine as long as every charge is of size PAGE_SIZE, because in
that case, being below the limit means having at least PAGE_SIZE bytes
available.

But with transparent huge pages, we may end up in an endless loop where
charging and reclaim fail, but we keep going because the limits are not
yet exceeded, although not allowing for a huge page.

Fix this up by explicitely checking for enough room, not just whether we
are within limits.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The charging code can encounter a charge size that is bigger than a
regular page in two situations: one is a batched charge to fill the
per-cpu stocks, the other is a huge page charge.

This code is distributed over two functions, however, and only the outer
one is aware of huge pages.  In case the charging fails, the inner
function will tell the outer function to retry if the charge size is
bigger than regular pages--assuming batched charging is the only case.
And the outer function will retry forever charging a huge page.

This patch makes sure the inner function can distinguish between batch
charging and a single huge page charge.  It will only signal another
attempt if batch charging failed, and go into regular reclaim when it is
called on behalf of a huge page.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When a tail page of THP is poisoned, memory-failure will do nothing except
setting PG_hwpoison, while the expected behavior is that the process, who
is using the poisoned tail page, should be killed.

The above problem is caused by lru check of the poisoned tail page of THP.
Because PG_lru flag is only set on the head page of THP, the check always
consider the poisoned tail page as NON lru page.

So the lru check for the tail page of THP should be avoided, as like as
hugetlb.

This patch adds !PageTransCompound() before lru check for THP, because of
the check (!PageHuge() && !PageTransCompound()) the whole branch could be
optimized away at build time when both hugetlbfs and THP are set with "N"
(or in archs not supporting either of those).

[akpm@linux-foundation.org: fix unrelated typo in shake_page() comment]
Signed-off-by: Jin Dongming <jin.dongming@np.css.fujitsu.com>
Reviewed-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When the tail page of THP is poisoned, the head page will be poisoned too.
 And the wrong address, address of head page, will be sent with sigbus
always.

So when the poisoned page is used by Guest OS which is running on KVM,
after the address changing(hva->gpa) by qemu, the unexpected process on
Guest OS will be killed by sigbus.

What we expected is that the process using the poisoned tail page could be
killed on Guest OS, but not that the process using the healthy head page
is killed.

Since it is not good to poison the healthy page, avoid poisoning other
than the page which is really poisoned.
  (While we poison all pages in a huge page in case of hugetlb,
   we can do this for THP thanks to split_huge_page().)

Here we fix two parts:
  1. Isolate the poisoned page only to make sure
     the reported address is the address of poisoned page.
  2. make the poisoned page work as the poisoned regular page.

[akpm@linux-foundation.org: fix spello in comment]
Signed-off-by: Jin Dongming <jin.dongming@np.css.fujitsu.com>
Reviewed-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The poisoned THP is now split with split_huge_page() in
collect_procs_anon().  If kmalloc() is failed in collect_procs(),
split_huge_page() could not be called.  And the work after
split_huge_page() for collecting the processes using poisoned page will
not be done, too.  So the processes using the poisoned page could not be
killed.

The condition becomes worse when CONFIG_DEBUG_VM == "Y".  Because the
poisoned THP could not be split, system panic will be caused by
VM_BUG_ON(PageTransHuge(page)) in try_to_unmap().

This patch does:
  1. move split_huge_page() to the place before collect_procs().
     This can be sure the failure of splitting THP is caused by itself.
  2. when splitting THP is failed, stop the operations after it.
     This can avoid unexpected system panic or non sense works.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Jin Dongming <jin.dongming@np.css.fujitsu.com>
Reviewed-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The support@simtec.co.uk address is for direct customer support only, the
EB2410ITX and EB110ATX entries should direct to the Simtec Linux Team
address of linux@simtec.co.uk

Also add correct email address for Vincent Sanders

[akpm@linux-foundation.org: fix Vincent's address]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Cc: Vincent Sanders <vince@simtec.co.uk>
Cc: Simtec Support <support@simtec.co.uk>
Cc: Simtec Linux Team <linux@simtec.co.uk>
Cc: Jack Stone <jwjstone@fastmail.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add the correct files for the Simtec BAST machine, ensuring the IDE and
IRQ routing are added, and move to the machine specific file instead of
trying to catch all of arch/arm/mach-s3c2410
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Cc: Simtec Linux Team <linux@simtec.co.uk>
Cc: Simtec Support <support@simtec.co.uk>
Cc: Jack Stone <jwjstone@fastmail.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

There are currently two entries under the "SIMTEC EB2410ITX (BAST)"
machine entry for drivers/*/*s3c2410*, which is catching everything
s3c2410 driver related.

This entry is for a specific S3C2410 based machine, so move these two file
entries to the "ARM/SAMSUNG ARM ARCHITECTURES" entry, where it will reach
a wider audience of interested parties.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Cc: Simtec Linux Team <linux@simtec.co.uk>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Cc: Jack Stone <jwjstone@fastmail.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

commit 95aac7b1 ("epoll: make epoll_wait() use the hrtimer range
feature") added a performance regression because it uses timespec_add_ns()
with potential very large 'ns' values.

[akpm@linux-foundation.org: s/epoll_set_mstimeout/ep_set_mstimeout/, per Davide]
Reported-by: Simon Kirby <sim@hostway.ca>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Shawn Bohrer <shawn.bohrer@gmail.com>
Acked-by: Davide Libenzi <davidel@xmailserver.org>
Cc: <stable@kernel.org>		[2.6.37.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

If migrate_huge_page by memory-failure fails , it calls put_page in itself
to decrease page reference and caller of migrate_huge_page also calls
putback_lru_pages.  It can do double free of page so it can make page
corruption on page holder.

In addtion, clean of pages on caller is consistent behavior with
migrate_pages by cf608ac1 ("mm: compaction: fix COMPACTPAGEFAILED
counting").
Signed-off-by: Minchan Kim <minchan.kim@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In some cases migrate_pages could return zero while still leaving a few
pages in the pagelist (and some caller wouldn't notice it has to call
putback_lru_pages after commit cf608ac1 ("mm: compaction: fix
COMPACTPAGEFAILED counting")).

Add one missing putback_lru_pages not added by commit cf608ac1 ("mm:
compaction: fix COMPACTPAGEFAILED counting").
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Minchan Kim <minchan.kim@gmail.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Cc: Christoph Lameter <cl@linux.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

noswapaccount couldn't be used to control memsw for both on/off cases so
we have added swapaccount[=0|1] parameter.  This way we can turn the
feature in two ways noswapaccount resp.  swapaccount=0.  We have kept the
original noswapaccount but I think we should remove it after some time as
it just makes more command line parameters without any advantages and also
the code to handle parameters is uglier if we want both parameters.
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Requested-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

__setup based kernel command line parameters handlers which are handled in
obsolete_checksetup are provided with the parameter value including =
(more precisely everything right after the parameter name).

This means that the current implementation of swapaccount[=1|0] doesn't
work at all because if there is a value for the parameter then we are
testing for "0" resp.  "1" but we are getting "=0" resp.  "=1" and if
there is no parameter value we are getting an empty string rather than
NULL.

The original noswapccount parameter, which doesn't care about the value,
works correctly.
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

move_native_irq() masks and unmasks the interrupt line
unconditionally, but the interrupt line might be masked due to a
threaded oneshot handler in progress. Unmasking the line in that case
can lead to interrupt storms. Observed on PREEMPT_RT.

Originally-from: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@kernel.org

* 'next' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: Fix ASM optimized code for LE
  microblaze: Fix unaligned issue on MMU system with BS=0 DIV=1
  microblaze: Fix DTB passing from bootloader

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  cifs: fix length checks in checkSMB
  [CIFS] Update cifs minor version
  cifs: No need to check crypto blockcipher allocation
  cifs: clean up some compiler warnings
  cifs: make CIFS depend on CRYPTO_MD4
  cifs: force a reconnect if there are too many MIDs in flight
  cifs: don't pop a printk when sending on a socket is interrupted
  cifs: simplify SMB header check routine
  cifs: send an NT_CANCEL request when a process is signalled
  cifs: handle cancelled requests better
  cifs: fix two compiler warning about uninitialized vars

As Tao Ma noticed, change 5ecfda04 breaks blktrace. This is because
blktrace mmaps a file with PROT_WRITE permissions but without PROT_READ,
so my attempt to not unnecessarity break COW during mlock ended up
causing mlock to fail with a permission problem.

I am proposing to let mlock ignore vma protection in all cases except
PROT_NONE. In particular, mlock should not fail for PROT_WRITE regions
(as in the blktrace case, which broke at 5ecfda04) or for PROT_EXEC
regions (which seem to me like they were always broken).
Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The comments under "config STUB_POULSBO" are close to correct,
but they are not being followed.  This patch updates them to reflect
the requirements for THERMAL.

This build error is caused by STUB_POULSBO selecting ACPI_VIDEO
when ACPI_VIDEO's config requirements are not met.

  ERROR: "thermal_cooling_device_register" [drivers/acpi/video.ko] undefined!
  ERROR: "thermal_cooling_device_unregister" [drivers/acpi/video.ko] undefined!
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Version 15 of schedstats was introduced in:

   67aa0f76: sched: remove unused fields from struct rq

and removed three unused counters in sched_yield(). Update
the documentation.
Signed-off-by: Javi Merino <cibervicho@gmail.com>
Cc: henrix@sapo.pt
Cc: rdunlap@xenotime.net
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1296515496-8229-1-git-send-email-cibervicho@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>