- 16 Aug, 2017 4 commits
-
-
Konstantin Khlebnikov authored
Traffic filters could keep direct pointers to classes in classful qdisc, thus qdisc destruction first removes all filters before freeing classes. Class destruction methods also tries to free attached filters but now this isn't safe because tcf_block_put() unlike to tcf_destroy_chain() cannot be called second time. This patch set class->block to NULL after first tcf_block_put() and turn second call into no-op. Fixes: 6529eaba ("net: sched: introduce tcf block infractructure") Signed-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
If fi->fib_metrics could not be allocated in fib_create_info() we attempt to dereference a NULL pointer in free_fib_info_rcu() : m = fi->fib_metrics; if (m != &dst_default_metrics && atomic_dec_and_test(&m->refcnt)) kfree(m); Before my recent patch, we used to call kfree(NULL) and nothing wrong happened. Instead of using RCU to defer freeing while we are under memory stress, it seems better to take immediate action. This was reported by syzkaller team. Fixes: 3fb07daf ("ipv4: add reference counting to metrics") Signed-off-by:Eric Dumazet <edumazet@google.com> Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
-
Tonghao Zhang authored
Signed-off-by:
Tonghao Zhang <xiangxia.m.yue@gmail.com> Signed-off-by:
-
Eric Dumazet authored
Based on a syzkaller report [1], I found that a per cpu allocation failure in snmp6_alloc_dev() would then lead to NULL dereference in ip6_route_dev_notify(). It seems this is a very old bug, thus no Fixes tag in this submission. Let's add in6_dev_put_clear() helper, as we will probably use it elsewhere (once available/present in net-next) [1] kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 1 PID: 17294 Comm: syz-executor6 Not tainted 4.13.0-rc2+ #10 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 task: ffff88019f456680 task.stack: ffff8801c6e58000 RIP: 0010:__read_once_size include/linux/compiler.h:250 [inline] RIP: 0010:atomic_read arch/x86/include/asm/atomic.h:26 [inline] RIP: 0010:refcount_sub_and_test+0x7d/0x1b0 lib/refcount.c:178 RSP: 0018:ffff8801c6e5f1b0 EFLAGS: 00010202 RAX: 0000000000000037 RBX: dffffc0000000000 RCX: ffffc90005d25000 RDX: ffff8801c6e5f218 RSI: ffffffff82342bbf RDI: 0000000000000001 RBP: ffff8801c6e5f240 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 1ffff10038dcbe37 R13: 0000000000000006 R14: 0000000000000001 R15: 00000000000001b8 FS: 00007f21e0429700(0000) GS:ffff8801dc100000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001ddbc22000 CR3: 00000001d632b000 CR4: 00000000001426e0 DR0: 0000000020000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000600 Call Trace: refcount_dec_and_test+0x1a/0x20 lib/refcount.c:211 in6_dev_put include/net/addrconf.h:335 [inline] ip6_route_dev_notify+0x1c9/0x4a0 net/ipv6/route.c:3732 notifier_call_chain+0x136/0x2c0 kernel/notifier.c:93 __raw_notifier_call_chain kernel/notifier.c:394 [inline] raw_notifier_call_chain+0x2d/0x40 kernel/notifier.c:401 call_netdevice_notifiers_info+0x51/0x90 net/core/dev.c:1678 call_netdevice_notifiers net/core/dev.c:1694 [inline] rollback_registered_many+0x91c/0xe80 net/core/dev.c:7107 rollback_registered+0x1be/0x3c0 net/core/dev.c:7149 register_netdevice+0xbcd/0xee0 net/core/dev.c:7587 register_netdev+0x1a/0x30 net/core/dev.c:7669 loopback_net_init+0x76/0x160 drivers/net/loopback.c:214 ops_init+0x10a/0x570 net/core/net_namespace.c:118 setup_net+0x313/0x710 net/core/net_namespace.c:294 copy_net_ns+0x27c/0x580 net/core/net_namespace.c:418 create_new_namespaces+0x425/0x880 kernel/nsproxy.c:107 unshare_nsproxy_namespaces+0xae/0x1e0 kernel/nsproxy.c:206 SYSC_unshare kernel/fork.c:2347 [inline] SyS_unshare+0x653/0xfa0 kernel/fork.c:2297 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x4512c9 RSP: 002b:00007f21e0428c08 EFLAGS: 00000216 ORIG_RAX: 0000000000000110 RAX: ffffffffffffffda RBX: 0000000000718150 RCX: 00000000004512c9 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000062020200 RBP: 0000000000000086 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000216 R12: 00000000004b973d R13: 00000000ffffffff R14: 000000002001d000 R15: 00000000000002dd Code: 50 2b 34 82 c7 00 f1 f1 f1 f1 c7 40 04 04 f2 f2 f2 c7 40 08 f3 f3 f3 f3 e8 a1 43 39 ff 4c 89 f8 48 8b 95 70 ff ff ff 48 c1 e8 03 <0f> b6 0c 18 4c 89 f8 83 e0 07 83 c0 03 38 c8 7c 08 84 c9 0f 85 RIP: __read_once_size include/linux/compiler.h:250 [inline] RSP: ffff8801c6e5f1b0 RIP: atomic_read arch/x86/include/asm/atomic.h:26 [inline] RSP: ffff8801c6e5f1b0 RIP: refcount_sub_and_test+0x7d/0x1b0 lib/refcount.c:178 RSP: ffff8801c6e5f1b0 ---[ end trace e441d046c6410d31 ]--- Signed-off-by:
-
- 15 Aug, 2017 13 commits
-
-
David S. Miller authored
Merge tag 'wireless-drivers-for-davem-2017-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 4.13 This time quite a few fixes for iwlwifi and one major regression fix for brcmfmac. For the iwlwifi aggregation bug a small change was needed for mac80211, but as Johannes is still away the mac80211 patch is taken via wireless-drivers tree. brcmfmac * fix firmware crash (a recent regression in bcm4343{0,1,8} iwlwifi * Some simple PCI HW ID fix-ups and additions for family 9000 * Remove a bogus warning message with new FWs (bug #196915) * Don't allow illegal channel options to be used (bug #195299) * A fix for checksum offload in family 9000 * A fix serious throughput degradation in 11ac with multiple streams * An old bug in SMPS where the firmware was not aware of SMPS changes * Fix a memory leak in the SAR code * Fix a stuck queue case in AP mode; * Convert a WARN to a simple debug in a legitimate race case (from which we can recover) * Fix a severe throughput aggregation on 9000-family devices due to aggregation issues, needed a small change in mac80211 ==================== Signed-off-by:
-
Eric Dumazet authored
Filtering the ACK packet was not put at the right place. At this place, we already allocated a child and put it into accept queue. We absolutely need to call tcp_child_process() to release its spinlock, or we will deadlock at accept() or close() time. Found by syzkaller team (Thanks a lot !) Fixes: 8fac365f ("tcp: Add a tcp_filter hook before handle ack packet") Signed-off-by:
-
Eric Dumazet authored
syzkaller reported that DCCP could have a non empty write queue at dismantle time. WARNING: CPU: 1 PID: 2953 at net/core/stream.c:199 sk_stream_kill_queues+0x3ce/0x520 net/core/stream.c:199 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 2953 Comm: syz-executor0 Not tainted 4.13.0-rc4+ #2 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:52 panic+0x1e4/0x417 kernel/panic.c:180 __warn+0x1c4/0x1d9 kernel/panic.c:541 report_bug+0x211/0x2d0 lib/bug.c:183 fixup_bug+0x40/0x90 arch/x86/kernel/traps.c:190 do_trap_no_signal arch/x86/kernel/traps.c:224 [inline] do_trap+0x260/0x390 arch/x86/kernel/traps.c:273 do_error_trap+0x120/0x390 arch/x86/kernel/traps.c:310 do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:323 invalid_op+0x1e/0x30 arch/x86/entry/entry_64.S:846 RIP: 0010:sk_stream_kill_queues+0x3ce/0x520 net/core/stream.c:199 RSP: 0018:ffff8801d182f108 EFLAGS: 00010297 RAX: ffff8801d1144140 RBX: ffff8801d13cb280 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff85137b00 RDI: ffff8801d13cb280 RBP: ffff8801d182f148 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801d13cb4d0 R13: ffff8801d13cb3b8 R14: ffff8801d13cb300 R15: ffff8801d13cb3b8 inet_csk_destroy_sock+0x175/0x3f0 net/ipv4/inet_connection_sock.c:835 dccp_close+0x84d/0xc10 net/dccp/proto.c:1067 inet_release+0xed/0x1c0 net/ipv4/af_inet.c:425 sock_release+0x8d/0x1e0 net/socket.c:597 sock_close+0x16/0x20 net/socket.c:1126 __fput+0x327/0x7e0 fs/file_table.c:210 ____fput+0x15/0x20 fs/file_table.c:246 task_work_run+0x18a/0x260 kernel/task_work.c:116 exit_task_work include/linux/task_work.h:21 [inline] do_exit+0xa32/0x1b10 kernel/exit.c:865 do_group_exit+0x149/0x400 kernel/exit.c:969 get_signal+0x7e8/0x17e0 kernel/signal.c:2330 do_signal+0x94/0x1ee0 arch/x86/kernel/signal.c:808 exit_to_usermode_loop+0x21c/0x2d0 arch/x86/entry/common.c:157 prepare_exit_to_usermode arch/x86/entry/common.c:194 [inline] syscall_return_slowpath+0x3a7/0x450 arch/x86/entry/common.c:263 Signed-off-by:
-
Al Viro authored
copy_linear_skb() is broken; both of its callers actually expect 'len' to be the amount we are trying to copy, not the offset of the end. Fix it keeping the meanings of arguments in sync with what the callers (both of them) expect. Also restore a saner behavior on EFAULT (i.e. preserving the iov_iter position in case of failure): The commit fd851ba9 ("udp: harden copy_linear_skb()") avoids the more destructive effect of the buggy copy_linear_skb(), e.g. no more invalid memory access, but said function still behaves incorrectly: when peeking with offset it can fail with EINVAL instead of copying the appropriate amount of memory. Reported-by:
Sasha Levin <alexander.levin@verizon.com> Fixes: b65ac446 ("udp: try to avoid 2 cache miss on dequeue") Fixes: fd851ba9 ("udp: harden copy_linear_skb()") Signed-off-by:
Al Viro <viro@ZenIV.linux.org.uk> Acked-by:
Paolo Abeni <pabeni@redhat.com> Tested-by:
-
Wei Wang authored
When a dst is created by addrconf_dst_alloc() for a host route or an anycast route, dst->dev points to loopback dev while rt6->rt6i_idev points to a real device. When the real device goes down, the current cleanup code only checks for dst->dev and assumes rt6->rt6i_idev->dev is the same. This causes the refcount leak on the real device in the above situation. This patch makes sure to always release the refcount taken on rt6->rt6i_idev during dst_dev_put(). Fixes: 587fea74 ("ipv6: mark DST_NOGC and remove the operation of dst_free()") Reported-by:
John Stultz <john.stultz@linaro.org> Tested-by:
Martin KaFai Lau <kafai@fb.com> Signed-off-by:
Wei Wang <weiwan@google.com> Signed-off-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Eric Dumazet authored
pfkey_broadcast() might be called from non process contexts, we can not use GFP_KERNEL in these cases [1]. This patch partially reverts commit ba51b6be ("net: Fix RCU splat in af_key"), only keeping the GFP_ATOMIC forcing under rcu_read_lock() section. [1] : syzkaller reported : in_atomic(): 1, irqs_disabled(): 0, pid: 2932, name: syzkaller183439 3 locks held by syzkaller183439/2932: #0: (&net->xfrm.xfrm_cfg_mutex){+.+.+.}, at: [<ffffffff83b43888>] pfkey_sendmsg+0x4c8/0x9f0 net/key/af_key.c:3649 #1: (&pfk->dump_lock){+.+.+.}, at: [<ffffffff83b467f6>] pfkey_do_dump+0x76/0x3f0 net/key/af_key.c:293 #2: (&(&net->xfrm.xfrm_policy_lock)->rlock){+...+.}, at: [<ffffffff83957632>] spin_lock_bh include/linux/spinlock.h:304 [inline] #2: (&(&net->xfrm.xfrm_policy_lock)->rlock){+...+.}, at: [<ffffffff83957632>] xfrm_policy_walk+0x192/0xa30 net/xfrm/xfrm_policy.c:1028 CPU: 0 PID: 2932 Comm: syzkaller183439 Not tainted 4.13.0-rc4+ #24 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:52 ___might_sleep+0x2b2/0x470 kernel/sched/core.c:5994 __might_sleep+0x95/0x190 kernel/sched/core.c:5947 slab_pre_alloc_hook mm/slab.h:416 [inline] slab_alloc mm/slab.c:3383 [inline] kmem_cache_alloc+0x24b/0x6e0 mm/slab.c:3559 skb_clone+0x1a0/0x400 net/core/skbuff.c:1037 pfkey_broadcast_one+0x4b2/0x6f0 net/key/af_key.c:207 pfkey_broadcast+0x4ba/0x770 net/key/af_key.c:281 dump_sp+0x3d6/0x500 net/key/af_key.c:2685 xfrm_policy_walk+0x2f1/0xa30 net/xfrm/xfrm_policy.c:1042 pfkey_dump_sp+0x42/0x50 net/key/af_key.c:2695 pfkey_do_dump+0xaa/0x3f0 net/key/af_key.c:299 pfkey_spddump+0x1a0/0x210 net/key/af_key.c:2722 pfkey_process+0x606/0x710 net/key/af_key.c:2814 pfkey_sendmsg+0x4d6/0x9f0 net/key/af_key.c:3650 sock_sendmsg_nosec net/socket.c:633 [inline] sock_sendmsg+0xca/0x110 net/socket.c:643 ___sys_sendmsg+0x755/0x890 net/socket.c:2035 __sys_sendmsg+0xe5/0x210 net/socket.c:2069 SYSC_sendmsg net/socket.c:2080 [inline] SyS_sendmsg+0x2d/0x50 net/socket.c:2076 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x445d79 RSP: 002b:00007f32447c1dc8 EFLAGS: 00000202 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000445d79 RDX: 0000000000000000 RSI: 000000002023dfc8 RDI: 0000000000000008 RBP: 0000000000000086 R08: 00007f32447c2700 R09: 00007f32447c2700 R10: 00007f32447c2700 R11: 0000000000000202 R12: 0000000000000000 R13: 00007ffe33edec4f R14: 00007f32447c29c0 R15: 0000000000000000 Fixes: ba51b6be ("net: Fix RCU splat in af_key") Signed-off-by:
-
Sabrina Dubroca authored
__tcp_ulp_find_autoload returns tcp_ulp_ops after taking a reference on the module. Then, if ->init fails, tcp_set_ulp propagates the error but nothing releases that reference. Fixes: 734942cc ("tcp: ULP infrastructure") Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
-
David S. Miller authored
Ding Tianhong says: ==================== Add new PCI_DEV_FLAGS_NO_RELAXED_ORDERING flag Some devices have problems with Transaction Layer Packets with the Relaxed Ordering Attribute set. This patch set adds a new PCIe Device Flag, PCI_DEV_FLAGS_NO_RELAXED_ORDERING, a set of PCI Quirks to catch some known devices with Relaxed Ordering issues, and a use of this new flag by the cxgb4 driver to avoid using Relaxed Ordering with problematic Root Complex Ports. It's been years since I've submitted kernel.org patches, I appolgise for the almost certain submission errors. v2: Alexander point out that the v1 was only a part of the whole solution, some platform which has some issues could use the new flag to indicate that it is not safe to enable relaxed ordering attribute, then we need to clear the relaxed ordering enable bits in the PCI configuration when initializing the device. So add a new second patch to modify the PCI initialization code to clear the relaxed ordering enable bit in the event that the root complex doesn't want relaxed ordering enabled. The third patch was base on the v1's second patch and only be changed to query the relaxed ordering enable bit in the PCI configuration space to allow the Chelsio NIC to send TLPs with the relaxed ordering attributes set. This version didn't plan to drop the defines for Intel Drivers to use the new checking way to enable relaxed ordering because it is not the hardest part of the moment, we could fix it in next patchset when this patches reach the goal. v3: Redesigned the logic for pci_configure_relaxed_ordering when configuration, If a PCIe device didn't enable the relaxed ordering attribute default, we should not do anything in the PCIe configuration, otherwise we should check if any of the devices above us do not support relaxed ordering by the PCI_DEV_FLAGS_NO_RELAXED_ORDERING flag, then base on the result if we get a return that indicate that the relaxed ordering is not supported we should update our device to disable relaxed ordering in configuration space. If the device above us doesn't exist or isn't the PCIe device, we shouldn't do anything and skip updating relaxed ordering because we are probably running in a guest. v4: Rename the functions pcie_get_relaxed_ordering and pcie_disable_relaxed_ordering according John's suggestion, and modify the description, use the true/false as the return value. We shouldn't enable relaxed ordering attribute by the setting in the root complex configuration space for PCIe device, so fix it for cxgb4. Fix some format issues. v5: Removed the unnecessary code for some function which only return the bool value, and add the check for VF device. Make this patch set base on 4.12-rc5. v6: Fix the logic error in the need to enable the relaxed ordering attribute for cxgb4. v7: The cxgb4 drivers will enable the PCIe Capability Device Control[Relaxed Ordering Enable] in PCI Probe() routine, this will break our current solution for some platform which has problematic when enable the relaxed ordering attribute. According to the latest recommendations, remove the enable_pcie_relaxed_ordering(), although it could not cover the Peer-to-Peer scene, but we agree to leave this problem until we really trigger it. Make this patch set base on 4.12 release version. v8: Change the second patch title and description to make it more reasonable, add the acked-by from Alex and Ashok. Add a new patch to enable the Relaxed Ordering Attribute for cxgb4vf driver. Make this patch set base on 4.13-rc2. v9: The document (https://software.intel.com/sites/default/files/managed/9e/ bc/64-ia-32-architectures-optimization-manual.pdf) indicate that the Xeon processors based on Broadwell/Haswell microarchitecture has the problem with Relaxed Ordering Attribute enabled, so add the whole list Device ID from Intel to the patch. v10: Significant rework based on Bjorn's feedback, reorganize the first 2 patches, now the Intel and AMD erratum soc has been divided to the different patches, rename the pcie_relaxed_ordering_supported() to pcie_relaxed_ordering_enabled(), and no need to check every intervening switch except the root ports, update some commits. v11: We shouldn't let the Intel engineer to acked the AMD's erratum patch, fix the funny mistake. ==================== Signed-off-by: -
Casey Leedom authored
cxgb4vf Ethernet driver now queries PCIe configuration space to determine if it can send TLPs to it with the Relaxed Ordering Attribute set, just like the pf did. Signed-off-by:
Casey Leedom <leedom@chelsio.com> Signed-off-by:
Ding Tianhong <dingtianhong@huawei.com> Reviewed-by:
-
Casey Leedom authored
cxgb4 Ethernet driver now queries PCIe configuration space to determine if it can send TLPs to it with the Relaxed Ordering Attribute set. Remove the enable_pcie_relaxed_ordering() to avoid enable PCIe Capability Device Control[Relaxed Ordering Enable] at probe routine, to make sure the driver will not send the Relaxed Ordering TLPs to the Root Complex which could not deal the Relaxed Ordering TLPs. Signed-off-by:
-
dingtianhong authored
Casey reported that the AMD ARM A1100 SoC has a bug in its PCIe Root Port where Upstream Transaction Layer Packets with the Relaxed Ordering Attribute clear are allowed to bypass earlier TLPs with Relaxed Ordering set, it would cause Data Corruption, so we need to disable Relaxed Ordering Attribute when Upstream TLPs to the Root Port. Reported-and-suggested-by:
-
dingtianhong authored
According to the Intel spec section 3.9.1 said: 3.9.1 Optimizing PCIe Performance for Accesses Toward Coherent Memory and Toward MMIO Regions (P2P) In order to maximize performance for PCIe devices in the processors listed in Table 3-6 below, the soft- ware should determine whether the accesses are toward coherent memory (system memory) or toward MMIO regions (P2P access to other devices). If the access is toward MMIO region, then software can command HW to set the RO bit in the TLP header, as this would allow hardware to achieve maximum throughput for these types of accesses. For accesses toward coherent memory, software can command HW to clear the RO bit in the TLP header (no RO), as this would allow hardware to achieve maximum throughput for these types of accesses. Table 3-6. Intel Processor CPU RP Device IDs for Processors Optimizing PCIe Performance Processor CPU RP Device IDs Intel Xeon processors based on 6F01H-6F0EH Broadwell microarchitecture Intel Xeon processors based on 2F01H-2F0EH Haswell microarchitecture It means some Intel processors has performance issue when use the Relaxed Ordering Attribute, so disable Relaxed Ordering for these root port. Signed-off-by:Alexander Duyck <alexander.h.duyck@intel.com> Acked-by:
Ashok Raj <ashok.raj@intel.com> Signed-off-by:
-
dingtianhong authored
When bit4 is set in the PCIe Device Control register, it indicates whether the device is permitted to use relaxed ordering. On some platforms using relaxed ordering can have performance issues or due to erratum can cause data-corruption. In such cases devices must avoid using relaxed ordering. The patch adds a new flag PCI_DEV_FLAGS_NO_RELAXED_ORDERING to indicate that Relaxed Ordering (RO) attribute should not be used for Transaction Layer Packets (TLP) targeted towards these affected root complexes. This patch checks if there is any node in the hierarchy that indicates that using relaxed ordering is not safe. In such cases the patch turns off the relaxed ordering by clearing the capability for this device. Signed-off-by:
-
- 14 Aug, 2017 5 commits
-
-
Jon Paul Maloy authored
In the function msg_reverse(), we reverse the header while trying to reuse the original buffer whenever possible. Those rejected/returned messages are always transmitted as unicast, but the msg_non_seq field is not explicitly set to zero as it should be. We have seen cases where multicast senders set the message type to "NOT dest_droppable", meaning that a multicast message shorter than one MTU will be returned, e.g., during receive buffer overflow, by reusing the original buffer. This has the effect that even the 'msg_non_seq' field is inadvertently inherited by the rejected message, although it is now sent as a unicast message. This again leads the receiving unicast link endpoint to steer the packet toward the broadcast link receive function, where it is dropped. The affected unicast link is thereafter (after 100 failed retransmissions) declared 'stale' and reset. We fix this by unconditionally setting the 'msg_non_seq' flag to zero for all rejected/returned messages. Reported-by:
Canh Duc Luu <canh.d.luu@dektech.com.au> Signed-off-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
-
Jon Paul Maloy authored
On L2 bearers, the TIPC broadcast function is sending out packets using the corresponding L2 broadcast address. At reception, we filter such packets under the assumption that they will also be delivered as broadcast packets. This assumption doesn't always hold true. Under high load, we have seen that a switch may convert the destination address and deliver the packet as a PACKET_MULTICAST, something leading to inadvertently dropped packets and a stale and reset broadcast link. We fix this by extending the reception filtering to accept packets of type PACKET_MULTICAST. Signed-off-by:
-
Florian Westphal authored
"ip route get $daddr iif eth0 from $saddr" causes: BUG: KASAN: use-after-free in ip_route_input_rcu+0x1535/0x1b50 Call Trace: ip_route_input_rcu+0x1535/0x1b50 ip_route_input_noref+0xf9/0x190 tcp_v4_early_demux+0x1a4/0x2b0 ip_rcv+0xbcb/0xc05 __netif_receive_skb+0x9c/0xd0 netif_receive_skb_internal+0x5a8/0x890 Problem is that inet_rtm_getroute calls either ip_route_input_rcu (if an iif was provided) or ip_route_output_key_hash_rcu. But ip_route_input_rcu, unlike ip_route_output_key_hash_rcu, already associates the dst_entry with the skb. This clears the SKB_DST_NOREF bit (i.e. skb_dst_drop will release/free the entry while it should not). Thus only set the dst if we called ip_route_output_key_hash_rcu(). I tested this patch by running: while true;do ip r get 10.0.1.2;done > /dev/null & while true;do ip r get 10.0.1.2 iif eth0 from 10.0.1.1;done > /dev/null & ... and saw no crash or memory leak. Cc: Roopa Prabhu <roopa@cumulusnetworks.com> Cc: David Ahern <dsahern@gmail.com> Fixes: ba52d61e ("ipv4: route: restore skb_dst_set in inet_rtm_getroute") Signed-off-by:
Florian Westphal <fw@strlen.de> Acked-by:
-
Arend Van Spriel authored
The firmware feature check introduced for multi-scheduled scan turned out to be failing for bcm4343{0,1,8} devices resulting in a firmware crash. The reason for this crash has not yet been root cause so this patch avoids the feature check for those device as a short-term fix. Reported-by:Stefan Wahren <stefan.wahren@i2se.com> Reported-by:
Ian Molton <ian@mnementh.co.uk> Fixes: 9fe929aa ("brcmfmac: add firmware feature detection for gscan feature") Signed-off-by:
Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Andreas Born authored
bond_miimon_commit() handles the UP transition for each slave of a bond in the case of MII. It is triggered 10 times per second for the default MII Polling interval of 100ms. For device drivers that do not implement __ethtool_get_link_ksettings() the call to bond_update_speed_duplex() fails persistently while the MII status could remain UP. That is, in this and other cases where the speed/duplex update keeps failing over a longer period of time while the MII state is UP, a warning is printed every MII polling interval. To address these excessive warnings net_ratelimit() should be used. Printing a warning once would not be sufficient since the call to bond_update_speed_duplex() could recover to succeed and fail again later. In that case there would be no new indication what went wrong. Fixes: b5bf0f5b (bonding: correctly update link status during mii-commit phase) Signed-off-by:
Andreas Born <futur.andy@googlemail.com> Signed-off-by:
-
- 11 Aug, 2017 10 commits
-
-
Eric Dumazet authored
syzkaller got crashes with CONFIG_HARDENED_USERCOPY=y configs. Issue here is that recvfrom() can be used with user buffer of Z bytes, and SO_PEEK_OFF of X bytes, from a skb with Y bytes, and following condition : Z < X < Y kernel BUG at mm/usercopy.c:72! invalid opcode: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 0 PID: 2917 Comm: syzkaller842281 Not tainted 4.13.0-rc3+ #16 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 task: ffff8801d2fa40c0 task.stack: ffff8801d1fe8000 RIP: 0010:report_usercopy mm/usercopy.c:64 [inline] RIP: 0010:__check_object_size+0x3ad/0x500 mm/usercopy.c:264 RSP: 0018:ffff8801d1fef8a8 EFLAGS: 00010286 RAX: 0000000000000078 RBX: ffffffff847102c0 RCX: 0000000000000000 RDX: 0000000000000078 RSI: 1ffff1003a3fded5 RDI: ffffed003a3fdf09 RBP: ffff8801d1fef998 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801d1ea480e R13: fffffffffffffffa R14: ffffffff84710280 R15: dffffc0000000000 FS: 0000000001360880(0000) GS:ffff8801dc000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000202ecfe4 CR3: 00000001d1ff8000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: check_object_size include/linux/thread_info.h:108 [inline] check_copy_size include/linux/thread_info.h:139 [inline] copy_to_iter include/linux/uio.h:105 [inline] copy_linear_skb include/net/udp.h:371 [inline] udpv6_recvmsg+0x1040/0x1af0 net/ipv6/udp.c:395 inet_recvmsg+0x14c/0x5f0 net/ipv4/af_inet.c:793 sock_recvmsg_nosec net/socket.c:792 [inline] sock_recvmsg+0xc9/0x110 net/socket.c:799 SYSC_recvfrom+0x2d6/0x570 net/socket.c:1788 SyS_recvfrom+0x40/0x50 net/socket.c:1760 entry_SYSCALL_64_fastpath+0x1f/0xbe Fixes: b65ac446 ("udp: try to avoid 2 cache miss on dequeue") Signed-off-by:
-
David S. Miller authored
Daniel Borkmann says: ==================== bpf: Minor fix in bpf_convert_ctx_access First one was found while trying to compile the kernel with !CONFIG_NET_RX_BUSY_POLL. ==================== Signed-off-by: -
Daniel Borkmann authored
When CONFIG_NET_SCHED or CONFIG_NET_RX_BUSY_POLL is /not/ set and we try a narrow __sk_buff load of tc_index or napi_id, respectively, then verifier rightfully complains that it's misconfigured, because we need to set target_size in each of the two cases. The rewrite for the ctx access is just a dummy op, but needs to pass, so fix this up. Fixes: f96da094 ("bpf: simplify narrower ctx access") Reported-by:
Shubham Bansal <illusionist.neo@gmail.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Daniel Borkmann authored
MIN_NAPI_ID is used in various places outside of CONFIG_NET_RX_BUSY_POLL wrapping, so when it's not set we run into build errors such as: net/core/dev.c: In function 'dev_get_by_napi_id': net/core/dev.c:886:16: error: ‘MIN_NAPI_ID’ undeclared (first use in this function) if (napi_id < MIN_NAPI_ID) ^~~~~~~~~~~ Thus, have MIN_NAPI_ID always defined to fix these errors. Signed-off-by: -
Anton Vasilyev authored
If mISDN_FsmNew() fails to allocate memory for jumpmatrix then null pointer dereference will occur on any write to jumpmatrix. The patch adds check on successful allocation and corresponding error handling. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Anton Vasilyev <vasilyev@ispras.ru> Signed-off-by:
-
Simon Horman authored
The Flower app may receive a request to update the MTU of a representor netdev upon receipt of a control message from the firmware. This requires the RTNL lock which needs to be taken outside of the packet processing path. As a handling of this correctly seems a little to invasive for a fix simply skip setting the MTU for now. Relevant backtrace: [ 1496.288489] BUG: scheduling while atomic: kworker/0:3/373/0x00000100 [ 1496.294911] dca syscopyarea sysfillrect sysimgblt fb_sys_fops ptp drm mxm_wmi ahci pps_core libahci i2c_algo_bit wmi [last unloaded: nfp] [ 1496.294918] CPU: 0 PID: 373 Comm: kworker/0:3 Tainted: G OE 4.13.0-rc3+ #3 [ 1496.294919] Hardware name: Supermicro X10DRi/X10DRi, BIOS 2.0 12/28/2015 [ 1496.294923] Workqueue: events work_for_cpu_fn [ 1496.294924] Call Trace: [ 1496.294927] <IRQ> [ 1496.294931] dump_stack+0x63/0x82 [ 1496.294935] __schedule_bug+0x54/0x70 [ 1496.294937] __schedule+0x62f/0x890 [ 1496.294941] ? intel_unmap_sg+0x90/0x90 [ 1496.294942] schedule+0x36/0x80 [ 1496.294943] schedule_preempt_disabled+0xe/0x10 [ 1496.294945] __mutex_lock.isra.2+0x445/0x4a0 [ 1496.294947] ? device_is_rmrr_locked+0x12/0x50 [ 1496.294950] ? kfree+0x162/0x170 [ 1496.294952] ? device_is_rmrr_locked+0x12/0x50 [ 1496.294953] ? iommu_should_identity_map+0x50/0xe0 [ 1496.294954] __mutex_lock_slowpath+0x13/0x20 [ 1496.294955] ? iommu_no_mapping+0x48/0xd0 [ 1496.294956] ? __mutex_lock_slowpath+0x13/0x20 [ 1496.294957] mutex_lock+0x2f/0x40 [ 1496.294960] rtnl_lock+0x15/0x20 [ 1496.294979] nfp_flower_cmsg_rx+0xc8/0x150 [nfp] [ 1496.294986] nfp_ctrl_poll+0x286/0x350 [nfp] [ 1496.294989] tasklet_action+0xf6/0x110 [ 1496.294992] __do_softirq+0xed/0x278 [ 1496.294993] irq_exit+0xb6/0xc0 [ 1496.294994] do_IRQ+0x4f/0xd0 [ 1496.294996] common_interrupt+0x89/0x89 Fixes: 948faa46 ("nfp: add support for control messages for flower app") Signed-off-by:
Simon Horman <simon.horman@netronome.com> Reviewed-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
Romain Perier authored
Currently, the function stmmac_mdio_register() is only used by stmmac_dvr_probe() from stmmac_main.c, in order to register the MDIO bus and probe information about the PHY. As this function is called before calling register_netdev(), all messages logged from stmmac_mdio_register are prefixed by "(unnamed net_device)". The goal of netdev_info or netdev_err is to dump useful infos about a net_device, when this data structure is partially initialized, there is no point for using these functions. This commit fixes the issue by replacing all netdev_*() by the corresponding dev_*() function for logging. The last netdev_info is replaced by phy_attached_info(), as a valid phydev can be used at this point. Signed-off-by:
Romain Perier <romain.perier@collabora.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Konstantin Khlebnikov authored
Without this filters cannot be attached. Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Andreas Born authored
The patch c4adfc82 ("bonding: make speed, duplex setting consistent with link state") puts the link state to down if bond_update_speed_duplex() cannot retrieve speed and duplex settings. Assumably the patch was written with 802.3ad mode in mind which relies on link speed/duplex settings. For other modes like active-backup these settings are not required. Thus, only for these other modes, this patch reintroduces support for slaves that do not support reporting speed or duplex such as wireless devices. This fixes the regression reported in bug 196547 (https://bugzilla.kernel.org/show_bug.cgi?id=196547). Fixes: c4adfc82 ("bonding: make speed, duplex setting consistent with link state") Signed-off-by:
Mahesh Bandewar <maheshb@google.com> Signed-off-by:
-
Vivien Didelot authored
The DSA layer frees the original skb when an xmit function returns NULL, meaning an error occurred. But if the tagging code copied the original skb, it is responsible of freeing the copy if an error occurs. The ksz tagging code currently has two issues: if skb_put_padto fails, the skb copy is not freed, and the original skb will be freed twice. To fix that, move skb_put_padto inside both branches of the skb_tailroom condition, before freeing the original skb, and free the copy on error. Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by:
Woojung Huh <woojung.huh@microchip.com> Signed-off-by:
-
- 10 Aug, 2017 8 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix handling of initial STATE message in TIPC, from Jon Paul Maloy. 2) Fix stats handling in bcm_sysport_get_stats(), from Florian Fainelli. 3) Reject 16777215 VNI value in geneve_validate(), from Girish Moodalbail. 4) Fix initial IGMP sysctl setting regression, from Nikolay Borisov. 5) Once a UFO fragmented frame is treated as UFO, we should continue doing so. Likewise once a frame has been segmented, we should continue doing that and not try to convert it to a UFO frame. From Willem de Bruijn. 6) Test the AF_PACKET RX/TX ring pg_vec state under the socket lock to prevent races. From Willem de Bruijn. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: packet: fix tp_reserve race in packet_set_ring udp: consistently apply ufo or fragmentation net: sched: set xt_tgchk_param par.nft_compat as 0 in ipt_init_target igmp: Fix regression caused by igmp sysctl namespace code. geneve: maximum value of VNI cannot be used net: systemport: Fix software statistics for SYSTEMPORT Lite tipc: remove premature ESTABLISH FSM event at link synchronization -
Willem de Bruijn authored
Updates to tp_reserve can race with reads of the field in packet_set_ring. Avoid this by holding the socket lock during updates in setsockopt PACKET_RESERVE. This bug was discovered by syzkaller. Fixes: 8913336a ("packet: add PACKET_RESERVE sockopt") Reported-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Willem de Bruijn authored
When iteratively building a UDP datagram with MSG_MORE and that datagram exceeds MTU, consistently choose UFO or fragmentation. Once skb_is_gso, always apply ufo. Conversely, once a datagram is split across multiple skbs, do not consider ufo. Sendpage already maintains the first invariant, only add the second. IPv6 does not have a sendpage implementation to modify. A gso skb must have a partial checksum, do not follow sk_no_check_tx in udp_send_skb. Found by syzkaller. Fixes: e89e9cf5 ("[IPv4/IPv6]: UFO Scatter-gather approach") Reported-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds authored
Pull sparc updates from David Miller: 1) Recognize M8 cpus, just basic chip ID matching, from Allen Pais. 2) Prevent crashes when bringing up sunvdc virtual block devices in some environments. From Jim Quigley. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sunvdc: prevent sunvdc panic when mpgroup disk added to guest domain sparc64: Increase max_phys_bits to 51 and VA bits to 53 for M8. sparc64: recognize and support sparc M8 cpu type sparc64: properly name the cpu constants -
Xin Long authored
Commit 55917a21 ("netfilter: x_tables: add context to know if extension runs from nft_compat") introduced a member nft_compat to xt_tgchk_param structure. But it didn't set it's value for ipt_init_target. With unexpected value in par.nft_compat, it may return unexpected result in some target's checkentry. This patch is to set all it's fields as 0 and only initialize the non-zero fields in ipt_init_target. v1->v2: As Wang Cong's suggestion, fix it by setting all it's fields as 0 and only initializing the non-zero fields. Fixes: 55917a21 ("netfilter: x_tables: add context to know if extension runs from nft_compat") Suggested-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Nikolay Borisov authored
Commit dcd87999 ("igmp: net: Move igmp namespace init to correct file") moved the igmp sysctls initialization from tcp_sk_init to igmp_net_init. This function is only called as part of per-namespace initialization, only if CONFIG_IP_MULTICAST is defined, otherwise igmp_mc_init() call in ip_init is compiled out, casuing the igmp pernet ops to not be registerd and those sysctl being left initialized with 0. However, there are certain functions, such as ip_mc_join_group which are always compiled and make use of some of those sysctls. Let's do a partial revert of the aforementioned commit and move the sysctl initialization into inet_init_net, that way they will always have sane values. Fixes: dcd87999 ("igmp: net: Move igmp namespace init to correct file") Link: https://bugzilla.kernel.org/show_bug.cgi?id=196595Reported-by:
Gerardo Exequiel Pozzi <vmlinuz386@gmail.com> Signed-off-by:
Nikolay Borisov <nborisov@suse.com> Signed-off-by:
-
Girish Moodalbail authored
Geneve's Virtual Network Identifier (VNI) is 24 bit long, so the range of values for it would be from 0 to 16777215 (2^24 -1). However, one cannot create a geneve device with VNI set to 16777215. This patch fixes this issue. Signed-off-by:
Girish Moodalbail <girish.moodalbail@oracle.com> Signed-off-by:
-
Florian Fainelli authored
With SYSTEMPORT Lite we have holes in our statistics layout that make us skip over the hardware MIB counters, bcm_sysport_get_stats() was not taking that into account resulting in reporting 0 for all SW-maintained statistics, fix this by skipping accordingly. Fixes: 44a4524c ("net: systemport: Add support for SYSTEMPORT Lite") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
