- 04 Apr, 2024 16 commits
-
-
Gal Pressman authored
Use ethtool_sprintf/puts() helper functions which handle the common pattern of printing a string into the ethtool strings interface and incrementing the string pointer by ETH_GSTRING_LEN. Change the fill_strings callback to accept a **data pointer, and remove the index and return value. Signed-off-by:
Gal Pressman <gal@nvidia.com> Reviewed-by:
Tariq Toukan <tariqt@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com> Signed-off-by:
Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240402133043.56322-4-tariqt@nvidia.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Gal Pressman authored
Use ethtool_sprintf/puts() helper functions which handle the common pattern of printing a string into the ethtool strings interface and incrementing the string pointer by ETH_GSTRING_LEN. The int return value in mlx5e_self_test_fill_strings() is not removed as it is still used to return the number of selftests. Signed-off-by:
-
Gal Pressman authored
Use ethtool_sprintf/puts() helper functions which handle the common pattern of printing a string into the ethtool strings interface and incrementing the string pointer by ETH_GSTRING_LEN. Signed-off-by:
-
Jakub Kicinski authored
Merge tag 'wireless-next-2024-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.10 The first "new features" pull request for v6.10 with changes both in stack and in drivers. The big thing in this pull request is that wireless subsystem is now almost free of sparse warnings. There's only one warning left in ath11k which was introduced in v6.9-rc1 and will be fixed via the wireless tree. Realtek drivers continue to improve, now we have support for RTL8922AE and RTL8723CS devices. ath11k also has long waited support for P2P. This time we have a small conflict in iwlwifi, Stephen has an example merge resolution which should help with fixing the conflict: https://lore.kernel.org/all/20240326100945.765b8caf@canb.auug.org.au/ Major changes: rtw89 * RTL8922AE Wi-Fi 7 PCI device support rtw88 * RTL8723CS SDIO device support iwlwifi * don't support puncturing in 5 GHz * support monitor mode on passive channels * BZ-W device support * P2P with HE/EHT support ath11k * P2P support for QCA6390, WCN6855 and QCA2066 * tag 'wireless-next-2024-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (122 commits) wifi: mt76: mt7915: workaround dubious x | !y warning wifi: mwl8k: Avoid -Wflex-array-member-not-at-end warnings wifi: ti: Avoid a hundred -Wflex-array-member-not-at-end warnings wifi: iwlwifi: mvm: fix check in iwl_mvm_sta_fw_id_mask net: rfkill: gpio: Convert to platform remove callback returning void wifi: mac80211: use kvcalloc() for codel vars wifi: iwlwifi: reconfigure TLC during HW restart wifi: iwlwifi: mvm: don't change BA sessions during restart wifi: iwlwifi: mvm: select STA mask only for active links wifi: iwlwifi: mvm: set wider BW OFDMA ignore correctly wifi: iwlwifi: Add support for LARI_CONFIG_CHANGE_CMD cmd v9 wifi: iwlwifi: mvm: Declare HE/EHT capabilities support for P2P interfaces wifi: iwlwifi: mvm: Remove outdated comment wifi: iwlwifi: add support for BZ_W wifi: iwlwifi: Print a specific device name. wifi: iwlwifi: remove wrong CRF_IDs wifi: iwlwifi: remove devices that never came out wifi: iwlwifi: mvm: mark EMLSR disabled in cleanup iterator wifi: iwlwifi: mvm: fix active link counting during recovery wifi: iwlwifi: mvm: assign link STA ID lookups during restart ... ==================== Link: https://lore.kernel.org/r/20240403093625.CF515C433C7@smtp.kernel.orgSigned-off-by:
-
Rahul Rameshbabu authored
ethtool.py depends on yml files in a specific location of the linux kernel tree. Using relative lookup for those files means that ethtool.py would need to be run under tools/net/ynl/. Lookup needed yml files without depending on the current working directory that ethtool.py is invoked from. Signed-off-by:
Rahul Rameshbabu <rrameshbabu@nvidia.com> Reviewed-by:
Dragos Tatulea <dtatulea@nvidia.com> Link: https://lore.kernel.org/r/20240402204000.115081-1-rrameshbabu@nvidia.comSigned-off-by:
-
Pawel Dembicki authored
This commit implements VCT in 88E308X/88E609X Family. It require two workarounds with some magic configuration. Regular use require only one register configuration. But Open Circuit require second workaround. It cause implementation two phases for fault length measuring. Fast Ethernet PHY have implemented very simple version of VCT. It's complitley different than vct5 or vct7. Signed-off-by:
Pawel Dembicki <paweldembicki@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20240402201123.2961909-3-paweldembicki@gmail.comSigned-off-by:
-
Pawel Dembicki authored
Some PHYs can recognize during a cable test if the impedance in the cable is okay. They can detect reflections caused by impedance discontinuity between a regular 100 Ohm cable and an abnormal part with a higher or lower impedance. This commit introduces a new result code: ETHTOOL_A_CABLE_RESULT_CODE_IMPEDANCE_MISMATCH, which represents the results of a cable test indicating issues with impedance integrity. Signed-off-by:
-
Pawel Dembicki authored
This patch implements only basic support. It covers PHY used in multiple IC: PHY: 88E3082, 88E3083 Switch: 88E6096, 88E6097 Signed-off-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20240402201123.2961909-1-paweldembicki@gmail.comSigned-off-by:
-
Christophe JAILLET authored
In "struct muram_info", the 'size' field is unused. In "struct memac_cfg", the 'fixed_link' field is unused. Remove them. Found with cppcheck, unusedStructMember. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by:
Sean Anderson <sean.anderson@seco.com> Reviewed-by:
-
Jakub Kicinski authored
Kuniyuki Iwashima says: ==================== af_unix: Remove old GC leftovers. This is a follow-up series for commit 4090fa37 ("af_unix: Replace garbage collection algorithm.") which introduced the new GC for AF_UNIX. Now we no longer need two ugly tricks for the old GC, let's remove them. ==================== Link: https://lore.kernel.org/r/20240401173125.92184-1-kuniyu@amazon.comSigned-off-by:
-
Kuniyuki Iwashima authored
In the previous GC implementation, the shape of the inflight socket graph was not expected to change while GC was in progress. MSG_PEEK was tricky because it could install inflight fd silently and transform the graph. Let's say we peeked a fd, which was a listening socket, and accept()ed some embryo sockets from it. The garbage collection algorithm would have been confused because the set of sockets visited in scan_inflight() would change within the same GC invocation. That's why we placed spin_lock(&unix_gc_lock) and spin_unlock() in unix_peek_fds() with a fat comment. In the new GC implementation, we no longer garbage-collect the socket if it exists in another queue, that is, if it has a bridge to another SCC. Also, accept() will require the lock if it has edges. Thus, we need not do the complicated lock dance. Signed-off-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20240401173125.92184-3-kuniyu@amazon.comSigned-off-by:
-
Kuniyuki Iwashima authored
When we passed fds, we used to bump each file's refcount twice in scm_fp_copy() and scm_fp_dup() before linking the socket to gc_inflight_list. This is because we incremented the inflight count of the socket and linked it to the list in advance before passing skb to the destination socket. Otherwise, the inflight socket could have been garbage-collected in a small race window between linking the socket to the list and queuing skb: CPU 1 : sendmsg(X) w/ A's fd CPU 2 : close(A) ----- ----- /* Here A's refcount is 1, and inflight count is 0 */ bump A's refcount to 2 in scm_fp_copy() bump A's inflight count to 1 link A to gc_inflight_list decrement A's refcount to 1 /* A's refcount == inflight count, thus A could be GC candidate */ start GC mark A as candidate purge A's receive queue queue skb w/ A's fd to X /* A is queued, but all data has been lost */ After commit 4090fa37 ("af_unix: Replace garbage collection algorithm."), we increment the inflight count and link the socket to the global list only when queuing the skb. The race no longer exists, so let's not clone the fd nor bump the count in unix_attach_fds(). Signed-off-by: -
Jakub Kicinski authored
Jason Xing says: ==================== tcp: make trace of reset logic complete Before this, we miss some cases where the TCP layer could send RST but we cannot trace it. So I decided to complete it :) Link: https://lore.kernel.org/all/20240329034243.7929-1-kerneljasonxing@gmail.com/ ==================== Link: https://lore.kernel.org/r/20240401073605.37335-1-kerneljasonxing@gmail.comSigned-off-by:
-
Jason Xing authored
Prior to this patch, what we can see by enabling trace_tcp_send is only happening under two circumstances: 1) active rst mode 2) non-active rst mode and based on the full socket That means the inconsistency occurs if we use tcpdump and trace simultaneously to see how rst happens. It's necessary that we should take into other cases into considerations, say: 1) time-wait socket 2) no socket ... By parsing the incoming skb and reversing its 4-tuple can we know the exact 'flow' which might not exist. Samples after applied this patch: 1. tcp_send_reset: skbaddr=XXX skaddr=XXX src=ip:port dest=ip:port state=TCP_ESTABLISHED 2. tcp_send_reset: skbaddr=000...000 skaddr=XXX src=ip:port dest=ip:port state=UNKNOWN Note: 1) UNKNOWN means we cannot extract the right information from skb. 2) skbaddr/skaddr could be 0 Signed-off-by:
Jason Xing <kernelxing@tencent.com> Link: https://lore.kernel.org/r/20240401073605.37335-3-kerneljasonxing@gmail.comSigned-off-by:
-
Jason Xing authored
Introducing entry_saddr and entry_daddr parameters in this macro for later use can help us record the reverse 4-tuple by analyzing the 4-tuple of the incoming skb when receiving. Signed-off-by:
Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20240401073605.37335-2-kerneljasonxing@gmail.comSigned-off-by:
-
Marcelo Tosatti authored
For systems that use CPU isolation (via nohz_full), creating or destroying a socket with SO_TIMESTAMP, SO_TIMESTAMPNS or SO_TIMESTAMPING with flag SOF_TIMESTAMPING_RX_SOFTWARE will cause a static key to be enabled/disabled. This in turn causes undesired IPIs to isolated CPUs. So enable the static key unconditionally, if CPU isolation is enabled, thus avoiding the IPIs. Signed-off-by:
Marcelo Tosatti <mtosatti@redhat.com> Reviewed-by:
Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/ZgrUiLLtbEUf9SFn@tpadSigned-off-by:
-
- 03 Apr, 2024 24 commits
-
-
David S. Miller authored
Harshitha Ramamurthy says: ==================== gve: enable ring size changes This series enables support to change ring size via ethtool in gve. The first three patches deal with some clean up, setting default values for the ring sizes and related fields. The last two patches enable ring size changes. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Harshitha Ramamurthy authored
Allow the user to change ring size via ethtool if supported by the device. The driver relies on the ring size ranges queried from device to validate ring sizes requested by the user. Reviewed-by:
Praveen Kaligineedi <pkaligineedi@google.com> Reviewed-by:
Harshitha Ramamurthy <hramamurthy@google.com> Signed-off-by:
-
Harshitha Ramamurthy authored
Add support to read ring size change capability and the min and max descriptor counts from the device and store it in the driver. Also accommodate a special case where the device does not provide minimum ring size depending on the version of the device. In that case, rely on default values for the minimums. Reviewed-by:
-
Harshitha Ramamurthy authored
Fulfill the requirement that for GQI, the number of pages per RX QPL is equal to the ring size. Set this value to be equal to ring size. Because of this change, the rx_data_slot_cnt and rx_pages_per_qpl fields stored in the priv structure are not needed, so remove their usage. And for DQO, the number of pages per RX QPL is more than ring size to account for out-of-order completions. So set it to two times of rx ring size. Reviewed-by:
-
Harshitha Ramamurthy authored
For the DQO queue format, the gve driver stores two ring sizes for both TX and RX - one for completion queue ring and one for data buffer ring. This is supposed to enable asymmetric sizes for these two rings but that is not supported. Make both fields reference the same single variable. This change renders reading supported TX completion ring size and RX buffer ring size for DQO from the device useless, so change those fields to reserved and remove related code. Reviewed-by:
-
Harshitha Ramamurthy authored
Combine the gve_set_desc_cnt and gve_set_desc_cnt_dqo into one function which sets the counts after checking the queue format. Both the functions in the previous code and the new combined function never return an error so make the new function void and remove the goto on error. Also rename the new function to gve_set_default_desc_cnt to be clearer about its intention. Reviewed-by:
-
Sai Krishna authored
Reset CGX/RPM MAC HW statistics at the time of driver probe() Signed-off-by:
Hariprasad Kelam <hkelam@marvell.com> Signed-off-by:
Sai Krishna <saikrishnag@marvell.com> Signed-off-by:
-
Gustavo A. R. Silva authored
-Wflex-array-member-not-at-end is coming in GCC-14, and we are getting ready to enable it globally. There are currently a couple of objects in `struct smc_clc_msg_proposal_area` that contain a couple of flexible structures: struct smc_clc_msg_proposal_area { ... struct smc_clc_v2_extension pclc_v2_ext; ... struct smc_clc_smcd_v2_extension pclc_smcd_v2_ext; ... }; So, in order to avoid ending up with a couple of flexible-array members in the middle of a struct, we use the `struct_group_tagged()` helper to separate the flexible array from the rest of the members in the flexible structure: struct smc_clc_smcd_v2_extension { struct_group_tagged(smc_clc_smcd_v2_extension_fixed, fixed, u8 system_eid[SMC_MAX_EID_LEN]; u8 reserved[16]; ); struct smc_clc_smcd_gid_chid gidchid[]; }; With the change described above, we now declare objects of the type of the tagged struct without embedding flexible arrays in the middle of another struct: struct smc_clc_msg_proposal_area { ... struct smc_clc_v2_extension_fixed pclc_v2_ext; ... struct smc_clc_smcd_v2_extension_fixed pclc_smcd_v2_ext; ... }; We also use `container_of()` when we need to retrieve a pointer to the flexible structures. So, with these changes, fix the following warnings: In file included from net/smc/af_smc.c:42: net/smc/smc_clc.h:186:49: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] 186 | struct smc_clc_v2_extension pclc_v2_ext; | ^~~~~~~~~~~ net/smc/smc_clc.h:188:49: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] 188 | struct smc_clc_smcd_v2_extension pclc_smcd_v2_ext; | ^~~~~~~~~~~~~~~~ Reviewed-by:Kees Cook <keescook@chromium.org> Signed-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by:
Wen Gu <guwen@linux.alibaba.com> Signed-off-by:
-
Johannes Berg authored
For short netdev holds within a function there are still a lot of users of dev_put() rather than netdev_put(). Add DEFINE_FREE() to allow making those safer. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Reviewed-by:
-
Johannes Berg authored
The new guard/scoped_gard can be useful for the RTNL as well, so add a guard definition for it. It gets used like { guard(rtnl)(); // RTNL held until end of block } or scoped_guard(rtnl) { // RTNL held in this block } as with any other guard/scoped_guard. Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queueJakub Kicinski authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-04-01 (ice) This series contains updates to ice driver only. Michal Schmidt changes flow for gettimex64 to use host-side spinlock rather than hardware semaphore for lighter-weight locking. Steven adds ability for switch recipes to be re-used when firmware supports it. Thorsten Blum removes unwanted newlines in netlink messaging. Michal Swiatkowski and Piotr re-organize devlink related code; renaming, moving, and consolidating it to a single location. Michal also simplifies the devlink init and cleanup path to occur under a single lock call. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: ice: hold devlink lock for whole init/cleanup ice: move devlink port code to a separate file ice: move ice_devlink.[ch] to devlink folder ice: Remove newlines in NL_SET_ERR_MSG_MOD ice: Add switch recipe reusing feature ice: fold ice_ptp_read_time into ice_ptp_gettimex64 ice: avoid the PTP hardware semaphore in gettimex64 path ice: add ice_adapter for shared data across PFs on the same NIC ==================== Link: https://lore.kernel.org/r/20240401172421.1401696-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Rob Herring authored
'snps,priority' is also defined in dma/snps,dw-axi-dmac.yaml as a uint32-array. It's preferred to have a single type for a given property name, so update the type in snps,dwmac schema to match. Signed-off-by:
Rob Herring <robh@kernel.org> Acked-by:
Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20240401204422.1692359-2-robh@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
Hangbin Liu says: ==================== doc/netlink: add a YAML spec for team Add a YAML spec for team. As we need to link two objects together to form the team module, rename team to team_core for linking. ==================== Link: https://lore.kernel.org/r/20240401031004.1159713-1-liuhangbin@gmail.comSigned-off-by:
-
Hangbin Liu authored
generated with: $ ./tools/net/ynl/ynl-gen-c.py --mode uapi \ > --spec Documentation/netlink/specs/team.yaml \ > --header -o include/uapi/linux/if_team.h Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Reviewed-by:
Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20240401031004.1159713-5-liuhangbin@gmail.comSigned-off-by:
-
Hangbin Liu authored
generated with: $ ./tools/net/ynl/ynl-gen-c.py --mode kernel \ > --spec Documentation/netlink/specs/team.yaml --source \ > -o drivers/net/team/team_nl.c $ ./tools/net/ynl/ynl-gen-c.py --mode kernel \ > --spec Documentation/netlink/specs/team.yaml --header \ > -o drivers/net/team/team_nl.h The TEAM_ATTR_LIST_PORT in team_nl_policy is removed as it is only in the port list reply attributes. Signed-off-by:
-
Hangbin Liu authored
Similar with commit 08d32323 ("net: fou: rename the source for linking"), We'll need to link two objects together to form the team module. This means the source can't be called team, the build system expects team.o to be the combined object. Signed-off-by:
-
Hangbin Liu authored
Add a YAML specification for team. Signed-off-by:
-
Jason Xing authored
Since commit 099ecf59 ("net: annotate lockless accesses to sk->sk_max_ack_backlog") decided to handle the sk_max_ack_backlog locklessly, there is one more function mostly called in TCP/DCCP cases. So this patch completes it:) Signed-off-by:
-
Christophe JAILLET authored
UTILITY_NAME_LENGTH is 16. So better use the former when defining the 'utility_name' array. This makes the intent clearer when it is used around line 260. While at it, declare variable in reverse xmas tree style. Signed-off-by:
-
Jakub Kicinski authored
Dawei Li says: ==================== Avoid explicit cpumask var allocation on stack v1: https://lore.kernel.org/lkml/20240329105610.922675-1-dawei.li@shingroup.cn/ ==================== Link: https://lore.kernel.org/r/20240331053441.1276826-1-dawei.li@shingroup.cnSigned-off-by:
-
Dawei Li authored
For CONFIG_CPUMASK_OFFSTACK=y kernel, explicit allocation of cpumask variable on stack is not recommended since it can cause potential stack overflow. Instead, kernel code should always use *cpumask_var API(s) to allocate cpumask var in config-neutral way, leaving allocation strategy to CONFIG_CPUMASK_OFFSTACK. Use *cpumask_var API(s) to address it. Signed-off-by:
Dawei Li <dawei.li@shingroup.cn> Link: https://lore.kernel.org/r/20240331053441.1276826-3-dawei.li@shingroup.cnSigned-off-by:
-
Dawei Li authored
For CONFIG_CPUMASK_OFFSTACK=y kernel, explicit allocation of cpumask variable on stack is not recommended since it can cause potential stack overflow. Instead, kernel code should always use *cpumask_var API(s) to allocate cpumask var in config-neutral way, leaving allocation strategy to CONFIG_CPUMASK_OFFSTACK. Use *cpumask_var API(s) to address it. Signed-off-by:
Alexandra Winter <wintera@linux.ibm.com> Link: https://lore.kernel.org/r/20240331053441.1276826-2-dawei.li@shingroup.cnSigned-off-by:
-
Krzysztof Kozlowski authored
Core in spi_register_driver() already sets the .owner, so driver does not need to. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by:
Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20240330211023.100924-2-krzysztof.kozlowski@linaro.orgSigned-off-by:
-
Krzysztof Kozlowski authored
Core in spi_register_driver() already sets the .owner, so driver does not need to. Signed-off-by:
-
