Pull iommu fixes from Joerg Roedel:

 - Two fixes for the new Apple DART driver to fix a kernel panic and a
   stale data usage issue

 - Intel VT-d fix for how PCI device ids are printed

* tag 'iommu-fixes-v5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/dart: Clear sid2group entry when a group is freed
  iommu/vt-d: Drop "0x" prefix from PCI bus & device addresses
  iommu/dart: Remove iommu_flush_ops

Pull networking fixes from Jakub Kicinski:
 "Networking fixes, including fixes from mac80211, netfilter and bpf.

  Current release - regressions:

   - bpf, cgroup: assign cgroup in cgroup_sk_alloc when called from
     interrupt

   - mdio: revert mechanical patches which broke handling of optional
     resources

   - dev_addr_list: prevent address duplication

  Previous releases - regressions:

   - sctp: break out if skb_header_pointer returns NULL in sctp_rcv_ootb
     (NULL deref)

   - Revert "mac80211: do not use low data rates for data frames with no
     ack flag", fixing broadcast transmissions

   - mac80211: fix use-after-free in CCMP/GCMP RX

   - netfilter: include zone id in tuple hash again, minimize collisions

   - netfilter: nf_tables: unlink table before deleting it (race -> UAF)

   - netfilter: log: work around missing softdep backend module

   - mptcp: don't return sockets in foreign netns

   - sched: flower: protect fl_walk() with rcu (race -> UAF)

   - ixgbe: fix NULL pointer dereference in ixgbe_xdp_setup

   - smsc95xx: fix stalled rx after link change

   - enetc: fix the incorrect clearing of IF_MODE bits

   - ipv4: fix rtnexthop len when RTA_FLOW is present

   - dsa: mv88e6xxx: 6161: use correct MAX MTU config method for this
     SKU

   - e100: fix length calculation & buffer overrun in ethtool::get_regs

  Previous releases - always broken:

   - mac80211: fix using stale frag_tail skb pointer in A-MSDU tx

   - mac80211: drop frames from invalid MAC address in ad-hoc mode

   - af_unix: fix races in sk_peer_pid and sk_peer_cred accesses (race
     -> UAF)

   - bpf, x86: Fix bpf mapping of atomic fetch implementation

   - bpf: handle return value of BPF_PROG_TYPE_STRUCT_OPS prog

   - netfilter: ip6_tables: zero-initialize fragment offset

   - mhi: fix error path in mhi_net_newlink

   - af_unix: return errno instead of NULL in unix_create1() when over
     the fs.file-max limit

  Misc:

   - bpf: exempt CAP_BPF from checks against bpf_jit_limit

   - netfilter: conntrack: make max chain length random, prevent
     guessing buckets by attackers

   - netfilter: nf_nat_masquerade: make async masq_inet6_event handling
     generic, defer conntrack walk to work queue (prevent hogging RTNL
     lock)"

* tag 'net-5.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (77 commits)
  af_unix: fix races in sk_peer_pid and sk_peer_cred accesses
  net: stmmac: fix EEE init issue when paired with EEE capable PHYs
  net: dev_addr_list: handle first address in __hw_addr_add_ex
  net: sched: flower: protect fl_walk() with rcu
  net: introduce and use lock_sock_fast_nested()
  net: phy: bcm7xxx: Fixed indirect MMD operations
  net: hns3: disable firmware compatible features when uninstall PF
  net: hns3: fix always enable rx vlan filter problem after selftest
  net: hns3: PF enable promisc for VF when mac table is overflow
  net: hns3: fix show wrong state when add existing uc mac address
  net: hns3: fix mixed flag HCLGE_FLAG_MQPRIO_ENABLE and HCLGE_FLAG_DCB_ENABLE
  net: hns3: don't rollback when destroy mqprio fail
  net: hns3: remove tc enable checking
  net: hns3: do not allow call hns3_nic_net_open repeatedly
  ixgbe: Fix NULL pointer dereference in ixgbe_xdp_setup
  net: bridge: mcast: Associate the seqcount with its protecting lock.
  net: mdio-ipq4019: Fix the error for an optional regs resource
  net: hns3: fix hclge_dbg_dump_tm_pg() stack usage
  net: mdio: mscc-miim: Fix the mdio controller
  af_unix: Return errno instead of NULL in unix_create1().
  ...

Pull gpio fixes from Bartosz Golaszewski:
 "A single fix for the gpio-pca953x driver and two commits updating the
  MAINTAINERS entries for Mun Yew Tham (GPIO specific) and myself
  (treewide after a change in professional situation).

  Summary:

   - don't ignore I2C errors in gpio-pca953x

   - update MAINTAINERS entries for Mun Yew Tham and myself"

* tag 'gpio-fixes-for-v5.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  MAINTAINERS: Update Mun Yew Tham as Altera Pio Driver maintainer
  MAINTAINERS: update my email address
  gpio: pca953x: do not ignore i2c errors

Pull rdma fixes from Jason Gunthorpe:
 "Not much too exciting here, although two syzkaller bugs that seem to
  have 9 lives may have finally been squashed.

  Several core bugs and a batch of driver bug fixes:

   - Fix compilation problems in qib and hfi1

   - Do not corrupt the joined multicast group state when using
     SEND_ONLY

   - Several CMA bugs, a reference leak for listening and two syzkaller
     crashers

   - Various bug fixes for irdma

   - Fix a Sleeping while atomic bug in usnic

   - Properly sanitize kernel pointers in dmesg

   - Two bugs in the 64b CQE support for hns"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/hns: Add the check of the CQE size of the user space
  RDMA/hns: Fix the size setting error when copying CQE in clean_cq()
  RDMA/hfi1: Fix kernel pointer leak
  RDMA/usnic: Lock VF with mutex instead of spinlock
  RDMA/hns: Work around broken constant propagation in gcc 8
  RDMA/cma: Ensure rdma_addr_cancel() happens before issuing more requests
  RDMA/cma: Do not change route.addr.src_addr.ss_family
  RDMA/irdma: Report correct WC error when there are MW bind errors
  RDMA/irdma: Report correct WC error when transport retry counter is exceeded
  RDMA/irdma: Validate number of CQ entries on create CQ
  RDMA/irdma: Skip CQP ring during a reset
  MAINTAINERS: Update Broadcom RDMA maintainers
  RDMA/cma: Fix listener leak in rdma_cma_listen_on_all() failure
  IB/cma: Do not send IGMP leaves for sendonly Multicast groups
  IB/qib: Fix clang confusion of NULL pointer comparison

Jann Horn reported that SO_PEERCRED and SO_PEERGROUPS implementations
are racy, as af_unix can concurrently change sk_peer_pid and sk_peer_cred.

In order to fix this issue, this patch adds a new spinlock that needs
to be used whenever these fields are read or written.

Jann also pointed out that l2cap_sock_get_peer_pid_cb() is currently
reading sk->sk_peer_pid which makes no sense, as this field
is only possibly set by AF_UNIX sockets.
We will have to clean this in a separate patch.
This could be done by reverting b48596d1 "Bluetooth: L2CAP: Add get_peer_pid callback"
or implementing what was truly expected.

Fixes: 109f6e39 ("af_unix: Allow SO_PEERCRED to work across namespaces.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Jann Horn <jannh@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

When STMMAC is paired with Energy-Efficient Ethernet(EEE) capable PHY,
and the PHY is advertising EEE by default, we need to enable EEE on the
xPCS side too, instead of having user to manually trigger the enabling
config via ethtool.

Fixed this by adding xpcs_config_eee() call in stmmac_eee_init().

Fixes: 7617af3d ("net: pcs: Introducing support for DWC xpcs Energy Efficient Ethernet")
Cc: Michael Sit Wei Hong <michael.wei.hong.sit@intel.com>
Signed-off-by: Wong Vee Khee <vee.khee.wong@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

struct dev_addr_list is used for device addresses, unicast addresses
and multicast addresses. The first of those needs special handling
of the main address - netdev->dev_addr points directly the data
of the entry and drivers write to it freely, so we can't maintain
it in the rbtree (for now, at least, to be fixed in net-next).

Current work around sprinkles special handling of the first
address on the list throughout the code but it missed the case
where address is being added. First address will not be visible
during subsequent adds.

Syzbot found a warning where unicast addresses are modified
without holding the rtnl lock, tl;dr is that team generates
the same modification multiple times, not necessarily when
right locks are held.

In the repro we have:

  macvlan -> team -> veth

macvlan adds a unicast address to the team. Team then pushes
that address down to its memebers (veths). Next something unrelated
makes team sync member addrs again, and because of the bug
the addr entries get duplicated in the veths. macvlan gets
removed, removes its addr from team which removes only one
of the duplicated addresses from veths. This removal is done
under rtnl. Next syzbot uses iptables to add a multicast addr
to team (which does not hold rtnl lock). Team syncs veth addrs,
but because veths' unicast list still has the duplicate it will
also get sync, even though this update is intended for mc addresses.
Again, uc address updates need rtnl lock, boom.

Reported-by: syzbot+7a2ab2cdc14d134de553@syzkaller.appspotmail.com
Fixes: 406f42fa ("net-next: When a bond have a massive amount of VLANs with IPv6 addresses, performance of changing link state, attaching a VRF, changing an IPv6 address, etc. go down dramtically.")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Patch that refactored fl_walk() to use idr_for_each_entry_continue_ul()
also removed rcu protection of individual filters which causes following
use-after-free when filter is deleted concurrently. Fix fl_walk() to obtain
rcu read lock while iterating and taking the filter reference and temporary
release the lock while calling arg->fn() callback that can sleep.

KASAN trace:

[  352.773640] ==================================================================
[  352.775041] BUG: KASAN: use-after-free in fl_walk+0x159/0x240 [cls_flower]
[  352.776304] Read of size 4 at addr ffff8881c8251480 by task tc/2987

[  352.777862] CPU: 3 PID: 2987 Comm: tc Not tainted 5.15.0-rc2+ #2
[  352.778980] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[  352.781022] Call Trace:
[  352.781573]  dump_stack_lvl+0x46/0x5a
[  352.782332]  print_address_description.constprop.0+0x1f/0x140
[  352.783400]  ? fl_walk+0x159/0x240 [cls_flower]
[  352.784292]  ? fl_walk+0x159/0x240 [cls_flower]
[  352.785138]  kasan_report.cold+0x83/0xdf
[  352.785851]  ? fl_walk+0x159/0x240 [cls_flower]
[  352.786587]  kasan_check_range+0x145/0x1a0
[  352.787337]  fl_walk+0x159/0x240 [cls_flower]
[  352.788163]  ? fl_put+0x10/0x10 [cls_flower]
[  352.789007]  ? __mutex_unlock_slowpath.constprop.0+0x220/0x220
[  352.790102]  tcf_chain_dump+0x231/0x450
[  352.790878]  ? tcf_chain_tp_delete_empty+0x170/0x170
[  352.791833]  ? __might_sleep+0x2e/0xc0
[  352.792594]  ? tfilter_notify+0x170/0x170
[  352.793400]  ? __mutex_unlock_slowpath.constprop.0+0x220/0x220
[  352.794477]  tc_dump_tfilter+0x385/0x4b0
[  352.795262]  ? tc_new_tfilter+0x1180/0x1180
[  352.796103]  ? __mod_node_page_state+0x1f/0xc0
[  352.796974]  ? __build_skb_around+0x10e/0x130
[  352.797826]  netlink_dump+0x2c0/0x560
[  352.798563]  ? netlink_getsockopt+0x430/0x430
[  352.799433]  ? __mutex_unlock_slowpath.constprop.0+0x220/0x220
[  352.800542]  __netlink_dump_start+0x356/0x440
[  352.801397]  rtnetlink_rcv_msg+0x3ff/0x550
[  352.802190]  ? tc_new_tfilter+0x1180/0x1180
[  352.802872]  ? rtnl_calcit.isra.0+0x1f0/0x1f0
[  352.803668]  ? tc_new_tfilter+0x1180/0x1180
[  352.804344]  ? _copy_from_iter_nocache+0x800/0x800
[  352.805202]  ? kasan_set_track+0x1c/0x30
[  352.805900]  netlink_rcv_skb+0xc6/0x1f0
[  352.806587]  ? rht_deferred_worker+0x6b0/0x6b0
[  352.807455]  ? rtnl_calcit.isra.0+0x1f0/0x1f0
[  352.808324]  ? netlink_ack+0x4d0/0x4d0
[  352.809086]  ? netlink_deliver_tap+0x62/0x3d0
[  352.809951]  netlink_unicast+0x353/0x480
[  352.810744]  ? netlink_attachskb+0x430/0x430
[  352.811586]  ? __alloc_skb+0xd7/0x200
[  352.812349]  netlink_sendmsg+0x396/0x680
[  352.813132]  ? netlink_unicast+0x480/0x480
[  352.813952]  ? __import_iovec+0x192/0x210
[  352.814759]  ? netlink_unicast+0x480/0x480
[  352.815580]  sock_sendmsg+0x6c/0x80
[  352.816299]  ____sys_sendmsg+0x3a5/0x3c0
[  352.817096]  ? kernel_sendmsg+0x30/0x30
[  352.817873]  ? __ia32_sys_recvmmsg+0x150/0x150
[  352.818753]  ___sys_sendmsg+0xd8/0x140
[  352.819518]  ? sendmsg_copy_msghdr+0x110/0x110
[  352.820402]  ? ___sys_recvmsg+0xf4/0x1a0
[  352.821110]  ? __copy_msghdr_from_user+0x260/0x260
[  352.821934]  ? _raw_spin_lock+0x81/0xd0
[  352.822680]  ? __handle_mm_fault+0xef3/0x1b20
[  352.823549]  ? rb_insert_color+0x2a/0x270
[  352.824373]  ? copy_page_range+0x16b0/0x16b0
[  352.825209]  ? perf_event_update_userpage+0x2d0/0x2d0
[  352.826190]  ? __fget_light+0xd9/0xf0
[  352.826941]  __sys_sendmsg+0xb3/0x130
[  352.827613]  ? __sys_sendmsg_sock+0x20/0x20
[  352.828377]  ? do_user_addr_fault+0x2c5/0x8a0
[  352.829184]  ? fpregs_assert_state_consistent+0x52/0x60
[  352.830001]  ? exit_to_user_mode_prepare+0x32/0x160
[  352.830845]  do_syscall_64+0x35/0x80
[  352.831445]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[  352.832331] RIP: 0033:0x7f7bee973c17
[  352.833078] Code: 0c 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10
[  352.836202] RSP: 002b:00007ffcbb368e28 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
[  352.837524] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f7bee973c17
[  352.838715] RDX: 0000000000000000 RSI: 00007ffcbb368e50 RDI: 0000000000000003
[  352.839838] RBP: 00007ffcbb36d090 R08: 00000000cea96d79 R09: 00007f7beea34a40
[  352.841021] R10: 00000000004059bb R11: 0000000000000246 R12: 000000000046563f
[  352.842208] R13: 0000000000000000 R14: 0000000000000000 R15: 00007ffcbb36d088

[  352.843784] Allocated by task 2960:
[  352.844451]  kasan_save_stack+0x1b/0x40
[  352.845173]  __kasan_kmalloc+0x7c/0x90
[  352.845873]  fl_change+0x282/0x22db [cls_flower]
[  352.846696]  tc_new_tfilter+0x6cf/0x1180
[  352.847493]  rtnetlink_rcv_msg+0x471/0x550
[  352.848323]  netlink_rcv_skb+0xc6/0x1f0
[  352.849097]  netlink_unicast+0x353/0x480
[  352.849886]  netlink_sendmsg+0x396/0x680
[  352.850678]  sock_sendmsg+0x6c/0x80
[  352.851398]  ____sys_sendmsg+0x3a5/0x3c0
[  352.852202]  ___sys_sendmsg+0xd8/0x140
[  352.852967]  __sys_sendmsg+0xb3/0x130
[  352.853718]  do_syscall_64+0x35/0x80
[  352.854457]  entry_SYSCALL_64_after_hwframe+0x44/0xae

[  352.855830] Freed by task 7:
[  352.856421]  kasan_save_stack+0x1b/0x40
[  352.857139]  kasan_set_track+0x1c/0x30
[  352.857854]  kasan_set_free_info+0x20/0x30
[  352.858609]  __kasan_slab_free+0xed/0x130
[  352.859348]  kfree+0xa7/0x3c0
[  352.859951]  process_one_work+0x44d/0x780
[  352.860685]  worker_thread+0x2e2/0x7e0
[  352.861390]  kthread+0x1f4/0x220
[  352.862022]  ret_from_fork+0x1f/0x30

[  352.862955] Last potentially related work creation:
[  352.863758]  kasan_save_stack+0x1b/0x40
[  352.864378]  kasan_record_aux_stack+0xab/0xc0
[  352.865028]  insert_work+0x30/0x160
[  352.865617]  __queue_work+0x351/0x670
[  352.866261]  rcu_work_rcufn+0x30/0x40
[  352.866917]  rcu_core+0x3b2/0xdb0
[  352.867561]  __do_softirq+0xf6/0x386

[  352.868708] Second to last potentially related work creation:
[  352.869779]  kasan_save_stack+0x1b/0x40
[  352.870560]  kasan_record_aux_stack+0xab/0xc0
[  352.871426]  call_rcu+0x5f/0x5c0
[  352.872108]  queue_rcu_work+0x44/0x50
[  352.872855]  __fl_put+0x17c/0x240 [cls_flower]
[  352.873733]  fl_delete+0xc7/0x100 [cls_flower]
[  352.874607]  tc_del_tfilter+0x510/0xb30
[  352.886085]  rtnetlink_rcv_msg+0x471/0x550
[  352.886875]  netlink_rcv_skb+0xc6/0x1f0
[  352.887636]  netlink_unicast+0x353/0x480
[  352.888285]  netlink_sendmsg+0x396/0x680
[  352.888942]  sock_sendmsg+0x6c/0x80
[  352.889583]  ____sys_sendmsg+0x3a5/0x3c0
[  352.890311]  ___sys_sendmsg+0xd8/0x140
[  352.891019]  __sys_sendmsg+0xb3/0x130
[  352.891716]  do_syscall_64+0x35/0x80
[  352.892395]  entry_SYSCALL_64_after_hwframe+0x44/0xae

[  352.893666] The buggy address belongs to the object at ffff8881c8251000
                which belongs to the cache kmalloc-2k of size 2048
[  352.895696] The buggy address is located 1152 bytes inside of
                2048-byte region [ffff8881c8251000, ffff8881c8251800)
[  352.897640] The buggy address belongs to the page:
[  352.898492] page:00000000213bac35 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1c8250
[  352.900110] head:00000000213bac35 order:3 compound_mapcount:0 compound_pincount:0
[  352.901541] flags: 0x2ffff800010200(slab|head|node=0|zone=2|lastcpupid=0x1ffff)
[  352.902908] raw: 002ffff800010200 0000000000000000 dead000000000122 ffff888100042f00
[  352.904391] raw: 0000000000000000 0000000000080008 00000001ffffffff 0000000000000000
[  352.905861] page dumped because: kasan: bad access detected

[  352.907323] Memory state around the buggy address:
[  352.908218]  ffff8881c8251380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  352.909471]  ffff8881c8251400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  352.910735] >ffff8881c8251480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  352.912012]                    ^
[  352.912642]  ffff8881c8251500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  352.913919]  ffff8881c8251580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  352.915185] ==================================================================

Fixes: d39d7149 ("idr: introduce idr_for_each_entry_continue_ul()")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Acked-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Syzkaller reported a false positive deadlock involving
the nl socket lock and the subflow socket lock:

MPTCP: kernel_bind error, err=-98
============================================
WARNING: possible recursive locking detected
5.15.0-rc1-syzkaller #0 Not tainted
--------------------------------------------
syz-executor998/6520 is trying to acquire lock:
ffff8880795718a0 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: mptcp_close+0x267/0x7b0 net/mptcp/protocol.c:2738

but task is already holding lock:
ffff8880787c8c60 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1612 [inline]
ffff8880787c8c60 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: mptcp_close+0x23/0x7b0 net/mptcp/protocol.c:2720

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(k-sk_lock-AF_INET);
  lock(k-sk_lock-AF_INET);

 *** DEADLOCK ***

 May be due to missing lock nesting notation

3 locks held by syz-executor998/6520:
 #0: ffffffff8d176c50 (cb_lock){++++}-{3:3}, at: genl_rcv+0x15/0x40 net/netlink/genetlink.c:802
 #1: ffffffff8d176d08 (genl_mutex){+.+.}-{3:3}, at: genl_lock net/netlink/genetlink.c:33 [inline]
 #1: ffffffff8d176d08 (genl_mutex){+.+.}-{3:3}, at: genl_rcv_msg+0x3e0/0x580 net/netlink/genetlink.c:790
 #2: ffff8880787c8c60 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1612 [inline]
 #2: ffff8880787c8c60 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: mptcp_close+0x23/0x7b0 net/mptcp/protocol.c:2720

stack backtrace:
CPU: 1 PID: 6520 Comm: syz-executor998 Not tainted 5.15.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
 print_deadlock_bug kernel/locking/lockdep.c:2944 [inline]
 check_deadlock kernel/locking/lockdep.c:2987 [inline]
 validate_chain kernel/locking/lockdep.c:3776 [inline]
 __lock_acquire.cold+0x149/0x3ab kernel/locking/lockdep.c:5015
 lock_acquire kernel/locking/lockdep.c:5625 [inline]
 lock_acquire+0x1ab/0x510 kernel/locking/lockdep.c:5590
 lock_sock_fast+0x36/0x100 net/core/sock.c:3229
 mptcp_close+0x267/0x7b0 net/mptcp/protocol.c:2738
 inet_release+0x12e/0x280 net/ipv4/af_inet.c:431
 __sock_release net/socket.c:649 [inline]
 sock_release+0x87/0x1b0 net/socket.c:677
 mptcp_pm_nl_create_listen_socket+0x238/0x2c0 net/mptcp/pm_netlink.c:900
 mptcp_nl_cmd_add_addr+0x359/0x930 net/mptcp/pm_netlink.c:1170
 genl_family_rcv_msg_doit+0x228/0x320 net/netlink/genetlink.c:731
 genl_family_rcv_msg net/netlink/genetlink.c:775 [inline]
 genl_rcv_msg+0x328/0x580 net/netlink/genetlink.c:792
 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2504
 genl_rcv+0x24/0x40 net/netlink/genetlink.c:803
 netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline]
 netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1340
 netlink_sendmsg+0x86d/0xdb0 net/netlink/af_netlink.c:1929
 sock_sendmsg_nosec net/socket.c:704 [inline]
 sock_sendmsg+0xcf/0x120 net/socket.c:724
 sock_no_sendpage+0x101/0x150 net/core/sock.c:2980
 kernel_sendpage.part.0+0x1a0/0x340 net/socket.c:3504
 kernel_sendpage net/socket.c:3501 [inline]
 sock_sendpage+0xe5/0x140 net/socket.c:1003
 pipe_to_sendpage+0x2ad/0x380 fs/splice.c:364
 splice_from_pipe_feed fs/splice.c:418 [inline]
 __splice_from_pipe+0x43e/0x8a0 fs/splice.c:562
 splice_from_pipe fs/splice.c:597 [inline]
 generic_splice_sendpage+0xd4/0x140 fs/splice.c:746
 do_splice_from fs/splice.c:767 [inline]
 direct_splice_actor+0x110/0x180 fs/splice.c:936
 splice_direct_to_actor+0x34b/0x8c0 fs/splice.c:891
 do_splice_direct+0x1b3/0x280 fs/splice.c:979
 do_sendfile+0xae9/0x1240 fs/read_write.c:1249
 __do_sys_sendfile64 fs/read_write.c:1314 [inline]
 __se_sys_sendfile64 fs/read_write.c:1300 [inline]
 __x64_sys_sendfile64+0x1cc/0x210 fs/read_write.c:1300
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f215cb69969
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 14 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffc96bb3868 EFLAGS: 00000246 ORIG_RAX: 0000000000000028
RAX: ffffffffffffffda RBX: 00007f215cbad072 RCX: 00007f215cb69969
RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000005
RBP: 0000000000000000 R08: 00007ffc96bb3a08 R09: 00007ffc96bb3a08
R10: 0000000100000002 R11: 0000000000000246 R12: 00007ffc96bb387c
R13: 431bde82d7b634db R14: 0000000000000000 R15: 0000000000000000

the problem originates from uncorrect lock annotation in the mptcp
code and is only visible since commit 2dcb96ba ("net: core: Correct
the sock::sk_lock.owned lockdep annotations"), but is present since
the port-based endpoint support initial implementation.

This patch addresses the issue introducing a nested variant of
lock_sock_fast() and using it in the relevant code path.

Fixes: 1729cf18 ("mptcp: create the listening socket for new port")
Fixes: 2dcb96ba ("net: core: Correct the sock::sk_lock.owned lockdep annotations")
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Reported-and-tested-by: syzbot+1dd53f7a89b299d59eaf@syzkaller.appspotmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Update Altera Pio Driver maintainer's email from <joyce.ooi@intel.com> to <mun.yew.tham@intel.com>
Signed-off-by: Mun Yew Tham <mun.yew.tham@intel.com>
Acked-by: Joyce Ooi <joyce.ooi@intel.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

My professional situation changes soon. Update my email address.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>

Per gpio_chip interface, error shall be proparated to the caller.

Attempt to silent diagnostics by returning zero (as written in the
comment) is plain wrong, because the zero return can be interpreted by
the caller as the gpio value.

Cc: stable@vger.kernel.org
Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com>
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

Pull sound fixes from Takashi Iwai:
 "This became a slightly large collection of changes, partly because
  I've been off in the last weeks. Most of changes are small and
  scattered while a bit big change is found in HD-audio Realtek codec
  driver; it's a very device-specific fix that has been long wanted, so
  I decided to pick up although it's in the middle RC.

  Some highlights:

   - A new guard ioctl for ALSA rawmidi API to avoid the misuse of the
     new timestamp framing mode; it's for a regression fix

   - HD-audio: a revert of the 5.15 change that might work badly, new
     quirks for Lenovo Legion & co, a follow-up fix for CS8409

   - ASoC: lots of SOF-related fixes, fsl component fixes, corrections
     of mediatek drivers

   - USB-audio: fix for the PM resume

   - FireWire: oxfw and motu fixes"

* tag 'sound-5.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (25 commits)
  ALSA: pcsp: Make hrtimer forwarding more robust
  ALSA: rawmidi: introduce SNDRV_RAWMIDI_IOCTL_USER_PVERSION
  ALSA: firewire-motu: fix truncated bytes in message tracepoints
  ASoC: SOF: trace: Omit error print when waking up trace sleepers
  ASoC: mediatek: mt8195: remove wrong fixup assignment on HDMITX
  ASoC: SOF: loader: Re-phrase the missing firmware error to avoid duplication
  ASoC: SOF: loader: release_firmware() on load failure to avoid batching
  ALSA: hda/cs8409: Setup Dolphin Headset Mic as Phantom Jack
  ALSA: pcxhr: "fix" PCXHR_REG_TO_PORT definition
  ASoC: SOF: imx: imx8m: Bar index is only valid for IRAM and SRAM types
  ASoC: SOF: imx: imx8: Bar index is only valid for IRAM and SRAM types
  ASoC: SOF: Fix DSP oops stack dump output contents
  ALSA: hda/realtek: Quirks to enable speaker output for Lenovo Legion 7i 15IMHG05, Yoga 7i 14ITL5/15ITL5, and 13s Gen2 laptops.
  ALSA: usb-audio: Unify mixer resume and reset_resume procedure
  Revert "ALSA: hda: Drop workaround for a hang at shutdown again"
  ALSA: oxfw: fix transmission method for Loud models based on OXFW971
  ASoC: mediatek: common: handle NULL case in suspend/resume function
  ASoC: fsl_xcvr: register platform component before registering cpu dai
  ASoC: fsl_spdif: register platform component before registering cpu dai
  ASoC: fsl_micfil: register platform component before registering cpu dai
  ...

Pull crypto fixes from Herbert Xu:
 "This contains fixes for a resource leak in ccp as well as stack
  corruption in x86/sm4"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: x86/sm4 - Fix frame pointer stack corruption
  crypto: ccp - fix resource leaks in ccp_run_aes_gcm_cmd()

When EEE support was added to the 28nm EPHY it was assumed that it would
be able to support the standard clause 45 over clause 22 register access
method. It turns out that the PHY does not support that, which is the
very reason for using the indirect shadow mode 2 bank 3 access method.

Implement {read,write}_mmd to allow the standard PHY library routines
pertaining to EEE querying and configuration to work correctly on these
PHYs. This forces us to implement a __phy_set_clr_bits() function that
does not grab the MDIO bus lock since the PHY driver's {read,write}_mmd
functions are always called with that lock held.

Fixes: 83ee102a ("net: phy: bcm7xxx: add support for 28nm EPHY")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Guangbin Huang says:

====================
net: hns3: add some fixes for -net

This series adds some fixes for the HNS3 ethernet driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, the firmware compatible features are enabled in PF driver
initialization process, but they are not disabled in PF driver
deinitialization process and firmware keeps these features in enabled
status.

In this case, if load an old PF driver (for example, in VM) which not
support the firmware compatible features, firmware will still send mailbox
message to PF when link status changed and PF will print
"un-supported mailbox message, code = 201".

To fix this problem, disable these firmware compatible features in PF
driver deinitialization process.

Fixes: ed8fb4b2 ("net: hns3: add link change event report")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, the rx vlan filter will always be disabled before selftest and
be enabled after selftest as the rx vlan filter feature is fixed on in
old device earlier than V3.

However, this feature is not fixed in some new devices and it can be
disabled by user. In this case, it is wrong if rx vlan filter is enabled
after selftest. So fix it.

Fixes: bcc26e8d ("net: hns3: remove unused code in hns3_self_test()")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If unicast mac address table is full, and user add a new mac address, the
unicast promisc needs to be enabled for the new unicast mac address can be
used. So does the multicast promisc.

Now this feature has been implemented for PF, and VF should be implemented
too. When the mac table of VF is overflow, PF will enable promisc for this
VF.

Fixes: 1e6e7610 ("net: hns3: configure promisc mode for VF asynchronously")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, if function adds an existing unicast mac address, eventhough
driver will not add this address into hardware, but it will return 0 in
function hclge_add_uc_addr_common(). It will cause the state of this
unicast mac address is ACTIVE in driver, but it should be in TO-ADD state.

To fix this problem, function hclge_add_uc_addr_common() returns -EEXIST
if mac address is existing, and delete two error log to avoid printing
them all the time after this modification.

Fixes: 72110b56 ("net: hns3: return 0 and print warning when hit duplicate MAC")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

HCLGE_FLAG_MQPRIO_ENABLE is supposed to set when enable
multiple TCs with tc mqprio, and HCLGE_FLAG_DCB_ENABLE is
supposed to set when enable multiple TCs with ets. But
the driver mixed the flags when updating the tm configuration.

Furtherly, PFC should be available when HCLGE_FLAG_MQPRIO_ENABLE
too, so remove the unnecessary limitation.

Fixes: 5a5c9091 ("net: hns3: add support for tc mqprio offload")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

For destroy mqprio is irreversible in stack, so it's unnecessary
to rollback the tc configuration when destroy mqprio failed.
Otherwise, it may cause the configuration being inconsistent
between driver and netstack.

As the failure is usually caused by reset, and the driver will
restore the configuration after reset, so it can keep the
configuration being consistent between driver and hardware.

Fixes: 5a5c9091 ("net: hns3: add support for tc mqprio offload")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, in function hns3_nic_set_real_num_queue(), the
driver doesn't report the queue count and offset for disabled
tc. If user enables multiple TCs, but only maps user
priorities to partial of them, it may cause the queue range
of the unmapped TC being displayed abnormally.

Fix it by removing the tc enable checking, ensure the queue
count is not zero.

With this change, the tc_en is useless now, so remove it.

Fixes: a75a8efa ("net: hns3: Fix tc setup when netdev is first up")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

hns3_nic_net_open() is not allowed to called repeatly, but there
is no checking for this. When doing device reset and setup tc
concurrently, there is a small oppotunity to call hns3_nic_net_open
repeatedly, and cause kernel bug by calling napi_enable twice.

The calltrace information is like below:
[ 3078.222780] ------------[ cut here ]------------
[ 3078.230255] kernel BUG at net/core/dev.c:6991!
[ 3078.236224] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[ 3078.243431] Modules linked in: hns3 hclgevf hclge hnae3 vfio_iommu_type1 vfio_pci vfio_virqfd vfio pv680_mii(O)
[ 3078.258880] CPU: 0 PID: 295 Comm: kworker/u8:5 Tainted: G           O      5.14.0-rc4+ #1
[ 3078.269102] Hardware name:  , BIOS KpxxxFPGA 1P B600 V181 08/12/2021
[ 3078.276801] Workqueue: hclge hclge_service_task [hclge]
[ 3078.288774] pstate: 60400009 (nZCv daif +PAN -UAO -TCO BTYPE=--)
[ 3078.296168] pc : napi_enable+0x80/0x84
tc qdisc sho[w  3d0e7v8 .e3t0h218 79] lr : hns3_nic_net_open+0x138/0x510 [hns3]

[ 3078.314771] sp : ffff8000108abb20
[ 3078.319099] x29: ffff8000108abb20 x28: 0000000000000000 x27: ffff0820a8490300
[ 3078.329121] x26: 0000000000000001 x25: ffff08209cfc6200 x24: 0000000000000000
[ 3078.339044] x23: ffff0820a8490300 x22: ffff08209cd76000 x21: ffff0820abfe3880
[ 3078.349018] x20: 0000000000000000 x19: ffff08209cd76900 x18: 0000000000000000
[ 3078.358620] x17: 0000000000000000 x16: ffffc816e1727a50 x15: 0000ffff8f4ff930
[ 3078.368895] x14: 0000000000000000 x13: 0000000000000000 x12: 0000259e9dbeb6b4
[ 3078.377987] x11: 0096a8f7e764eb40 x10: 634615ad28d3eab5 x9 : ffffc816ad8885b8
[ 3078.387091] x8 : ffff08209cfc6fb8 x7 : ffff0820ac0da058 x6 : ffff0820a8490344
[ 3078.396356] x5 : 0000000000000140 x4 : 0000000000000003 x3 : ffff08209cd76938
[ 3078.405365] x2 : 0000000000000000 x1 : 0000000000000010 x0 : ffff0820abfe38a0
[ 3078.414657] Call trace:
[ 3078.418517]  napi_enable+0x80/0x84
[ 3078.424626]  hns3_reset_notify_up_enet+0x78/0xd0 [hns3]
[ 3078.433469]  hns3_reset_notify+0x64/0x80 [hns3]
[ 3078.441430]  hclge_notify_client+0x68/0xb0 [hclge]
[ 3078.450511]  hclge_reset_rebuild+0x524/0x884 [hclge]
[ 3078.458879]  hclge_reset_service_task+0x3c4/0x680 [hclge]
[ 3078.467470]  hclge_service_task+0xb0/0xb54 [hclge]
[ 3078.475675]  process_one_work+0x1dc/0x48c
[ 3078.481888]  worker_thread+0x15c/0x464
[ 3078.487104]  kthread+0x160/0x170
[ 3078.492479]  ret_from_fork+0x10/0x18
[ 3078.498785] Code: c8027c81 35ffffa2 d50323bf d65f03c0 (d4210000)
[ 3078.506889] ---[ end trace 8ebe0340a1b0fb44 ]---

Once hns3_nic_net_open() is excute success, the flag
HNS3_NIC_STATE_DOWN will be cleared. So add checking for this
flag, directly return when HNS3_NIC_STATE_DOWN is no set.

Fixes: e8884027 ("net: hns3: call hns3_nic_net_open() while doing HNAE3_UP_CLIENT")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ixgbe driver currently generates a NULL pointer dereference with
some machine (online cpus < 63). This is due to the fact that the
maximum value of num_xdp_queues is nr_cpu_ids. Code is in
"ixgbe_set_rss_queues"".

Here's how the problem repeats itself:
Some machine (online cpus < 63), And user set num_queues to 63 through
ethtool. Code is in the "ixgbe_set_channels",
	adapter->ring_feature[RING_F_FDIR].limit = count;

It becomes 63.

When user use xdp, "ixgbe_set_rss_queues" will set queues num.
	adapter->num_rx_queues = rss_i;
	adapter->num_tx_queues = rss_i;
	adapter->num_xdp_queues = ixgbe_xdp_queues(adapter);

And rss_i's value is from
	f = &adapter->ring_feature[RING_F_FDIR];
	rss_i = f->indices = f->limit;

So "num_rx_queues" > "num_xdp_queues", when run to "ixgbe_xdp_setup",
	for (i = 0; i < adapter->num_rx_queues; i++)
		if (adapter->xdp_ring[i]->xsk_umem)

It leads to panic.

Call trace:
[exception RIP: ixgbe_xdp+368]
RIP: ffffffffc02a76a0  RSP: ffff9fe16202f8d0  RFLAGS: 00010297
RAX: 0000000000000000  RBX: 0000000000000020  RCX: 0000000000000000
RDX: 0000000000000000  RSI: 000000000000001c  RDI: ffffffffa94ead90
RBP: ffff92f8f24c0c18   R8: 0000000000000000   R9: 0000000000000000
R10: ffff9fe16202f830  R11: 0000000000000000  R12: ffff92f8f24c0000
R13: ffff9fe16202fc01  R14: 000000000000000a  R15: ffffffffc02a7530
ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
 7 [ffff9fe16202f8f0] dev_xdp_install at ffffffffa89fbbcc
 8 [ffff9fe16202f920] dev_change_xdp_fd at ffffffffa8a08808
 9 [ffff9fe16202f960] do_setlink at ffffffffa8a20235
10 [ffff9fe16202fa88] rtnl_setlink at ffffffffa8a20384
11 [ffff9fe16202fc78] rtnetlink_rcv_msg at ffffffffa8a1a8dd
12 [ffff9fe16202fcf0] netlink_rcv_skb at ffffffffa8a717eb
13 [ffff9fe16202fd40] netlink_unicast at ffffffffa8a70f88
14 [ffff9fe16202fd80] netlink_sendmsg at ffffffffa8a71319
15 [ffff9fe16202fdf0] sock_sendmsg at ffffffffa89df290
16 [ffff9fe16202fe08] __sys_sendto at ffffffffa89e19c8
17 [ffff9fe16202ff30] __x64_sys_sendto at ffffffffa89e1a64
18 [ffff9fe16202ff38] do_syscall_64 at ffffffffa84042b9
19 [ffff9fe16202ff50] entry_SYSCALL_64_after_hwframe at ffffffffa8c0008c

So I fix ixgbe_max_channels so that it will not allow a setting of queues
to be higher than the num_online_cpus(). And when run to ixgbe_xdp_setup,
take the smaller value of num_rx_queues and num_xdp_queues.

Fixes: 4a9b32f3 ("ixgbe: fix potential RX buffer starvation for AF_XDP")
Signed-off-by: Feng Zhou <zhoufeng.zf@bytedance.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The sequence count bridge_mcast_querier::seq is protected by
net_bridge::multicast_lock but seqcount_init() does not associate the
seqcount with the lock. This leads to a warning on PREEMPT_RT because
preemption is still enabled.

Let seqcount_init() associate the seqcount with lock that protects the
write section. Remove lockdep_assert_held_once() because lockdep already checks
whether the associated lock is held.

Fixes: 67b746f9 ("net: bridge: mcast: make sure querier port/address updates are consistent")
Reported-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Mike Galbraith <efault@gmx.de>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Link: https://lore.kernel.org/r/20210928141049.593833-1-bigeasy@linutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The second resource is optional which is only provided on the chipset
IPQ5018. But the blamed commit ignores that and if the resource is
not there it just fails.

the resource is used like this,
	if (priv->eth_ldo_rdy) {
		val = readl(priv->eth_ldo_rdy);
		val |= BIT(0);
		writel(val, priv->eth_ldo_rdy);
		fsleep(IPQ_PHY_SET_DELAY_US);
	}

This patch reverts that to still allow the second resource to be optional
because other SoC have the some MDIO controller and doesn't need to
second resource.

Fixes: fa14d03e ("net: mdio-ipq4019: Make use of devm_platform_ioremap_resource()")
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20210928134849.2092-1-caihuoqing@baidu.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull pin control fixes from Linus Walleij:
 "Some few pin control fixes for the v5.15 kernel cycle. The most
  critical is the AMD fixes.

   - Fix wakeup interrupts in the AMD driver affecting AMD laptops.

   - Fix parent irqspec translation in the Qualcomm SPMI GPIO driver.

   - Fix deferred probe handling in the Rockchip driver, this is a
     stopgap solution while we look for something more elegant.

   - Add PM suspend callbacks to the Qualcomm SC7280 driver.

   - Some minor doc fix (should have come in earlier, sorry)"

* tag 'pinctrl-v5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: qcom: sc7280: Add PM suspend callbacks
  gpio/rockchip: fetch deferred output settings on probe
  pinctrl/rockchip: add a queue for deferred pin output settings on probe
  pinctrl: qcom: spmi-gpio: correct parent irqspec translation
  pinctrl: amd: Handle wake-up interrupt
  pinctrl: amd: Add irq field data
  pinctrl: core: Remove duplicated word from devm_pinctrl_unregister()

Pull VFIO fixes from Alex Williamson:

 - Fix vfio-ap leak on uninit (Jason Gunthorpe)

 - Add missing prototype arg name (Colin Ian King)

* tag 'vfio-v5.15-rc4' of git://github.com/awilliam/linux-vfio:
  vfio/ap_ops: Add missed vfio_uninit_group_dev()
  vfio/pci: add missing identifier name in argument of function prototype

Pull more m68k updates from Geert Uytterhoeven:

 - signal handling fixes

 - removal of set_fs()

[ The set_fs removal isn't strictly a fix, but it's been pending for a
  while and is very welcome. The signal handling fixes resolved an issue
  that was incorrectly attributed to the set_fs changes    - Linus ]

* tag 'm68k-for-v5.15-tag3' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Remove set_fs()
  m68k: Provide __{get,put}_kernel_nofault
  m68k: Factor the 8-byte lowlevel {get,put}_user code into helpers
  m68k: Use BUILD_BUG for passing invalid sizes to get_user/put_user
  m68k: Remove the 030 case in virt_to_phys_slow
  m68k: Document that access_ok is broken for !CONFIG_CPU_HAS_ADDRESS_SPACES
  m68k: Leave stack mangling to asm wrapper of sigreturn()
  m68k: Update ->thread.esp0 before calling syscall_trace() in ret_from_signal
  m68k: Handle arrivals of multiple signals correctly

Merge tag 'nios2_fixes_for_v5.15_part1' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux

Pull nios2 fixes from Dinh Nguyen:

 - Fix build warning for unmet dependency for EARLY_PRINTK

 - Remove unused dram_start() function

* tag 'nios2_fixes_for_v5.15_part1' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
  NIOS2: setup.c: drop unused variable 'dram_start'
  NIOS2: fix kconfig unmet dependency warning for SERIAL_CORE_CONSOLE

Pull fsverity fix from Eric Biggers:
 "Fix an integer overflow when computing the Merkle tree layout of
  extremely large files, exposed by btrfs adding support for fs-verity"

* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
  fs-verity: fix signed integer overflow with i_size near S64_MAX

Pull virtio/vdpa fixes from Michael Tsirkin:
 "Fixes up some issues in rc1"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  vdpa: potential uninitialized return in vhost_vdpa_va_map()
  vdpa/mlx5: Avoid executing set_vq_ready() if device is reset
  vdpa/mlx5: Clear ready indication for control VQ
  vduse: Cleanup the old kernel states after reset failure
  vduse: missing error code in vduse_init()
  virtio: don't fail on !of_device_is_compatible

Pull MMC fixes from Ulf Hansson:

 - renesas_sdhi: Fix regression with hard reset on old SDHIs

 - dw_mmc: Only inject fault before done/error

* tag 'mmc-v5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: renesas_sdhi: fix regression with hard reset on old SDHIs
  mmc: dw_mmc: Only inject fault before done/error

Daniel Borkmann says:

====================
pull-request: bpf 2021-09-28

The following pull-request contains BPF updates for your *net* tree.

We've added 10 non-merge commits during the last 14 day(s) which contain
a total of 11 files changed, 139 insertions(+), 53 deletions(-).

The main changes are:

1) Fix MIPS JIT jump code emission for too large offsets, from Piotr Krysiuk.

2) Fix x86 JIT atomic/fetch emission when dst reg maps to rax, from Johan Almbladh.

3) Fix cgroup_sk_alloc corner case when called from interrupt, from Daniel Borkmann.

4) Fix segfault in libbpf's linker for objects without BTF, from Kumar Kartikeya Dwivedi.

5) Fix bpf_jit_charge_modmem for applications with CAP_BPF, from Lorenz Bauer.

6) Fix return value handling for struct_ops BPF programs, from Hou Tao.

7) Various fixes to BPF selftests, from Jiri Benc.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
,

This function copies strings around between multiple buffers
including a large on-stack array that causes a build warning
on 32-bit systems:

drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c: In function 'hclge_dbg_dump_tm_pg':
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c:782:1: error: the frame size of 1424 bytes is larger than 1400 bytes [-Werror=frame-larger-than=]

The function can probably be cleaned up a lot, to go back to
printing directly into the output buffer, but dynamically allocating
the structure is a simpler workaround for now.

Fixes: 04d96139 ("net: hns3: refine function hclge_dbg_dump_tm_pri()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

According to the documentation the second resource is optional. But the
blamed commit ignores that and if the resource is not there it just
fails.

This patch reverts that to still allow the second resource to be
optional because other SoC have the some MDIO controller and doesn't
need to second resource.

Fixes: 672a1c39 ("net: mdio: mscc-miim: Make use of the helper function devm_platform_ioremap_resource()")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

unix_create1() returns NULL on error, and the callers assume that it never
fails for reasons other than out of memory.  So, the callers always return
-ENOMEM when unix_create1() fails.

However, it also returns NULL when the number of af_unix sockets exceeds
twice the limit controlled by sysctl: fs.file-max.  In this case, the
callers should return -ENFILE like alloc_empty_file().

This patch changes unix_create1() to return the correct error value instead
of NULL on error.

Out of curiosity, the assumption has been wrong since 1999 due to this
change introduced in 2.2.4 [0].

  diff -u --recursive --new-file v2.2.3/linux/net/unix/af_unix.c linux/net/unix/af_unix.c
  --- v2.2.3/linux/net/unix/af_unix.c	Tue Jan 19 11:32:53 1999
  +++ linux/net/unix/af_unix.c	Sun Mar 21 07:22:00 1999
  @@ -388,6 +413,9 @@
   {
   	struct sock *sk;

  +	if (atomic_read(&unix_nr_socks) >= 2*max_files)
  +		return NULL;
  +
   	MOD_INC_USE_COUNT;
   	sk = sk_alloc(PF_UNIX, GFP_KERNEL, 1);
   	if (!sk) {

[0]: https://cdn.kernel.org/pub/linux/kernel/v2.2/patch-2.2.4.gz

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>

up->corkflag field can be read or written without any lock.
Annotate accesses to avoid possible syzbot/KCSAN reports.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When CONFIG_INET is not set, there are failing references to IPv4
functions, so make this driver depend on INET.

Fixes these build errors:

sparc64-linux-ld: drivers/net/ethernet/sun/sunvnet_common.o: in function `sunvnet_start_xmit_common':
sunvnet_common.c:(.text+0x1a68): undefined reference to `__icmp_send'
sparc64-linux-ld: drivers/net/ethernet/sun/sunvnet_common.o: in function `sunvnet_poll_common':
sunvnet_common.c:(.text+0x358c): undefined reference to `ip_send_check'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Aaron Young <aaron.young@oracle.com>
Cc: Rashmi Narasimhan <rashmi.narasimhan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>