- 20 Jul, 2007 40 commits
-
-
Takashi Iwai authored
Fixed PM resume of cs46xx devices. It now restores properly the DSP image and kick-off the DSP. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Jaroslav Kysela <perex@suse.cz>
-
Matthew Ranostay authored
Added support for some boards with SPDIF in/out, and cleaned up the GPIO enable function. Signed-off-by:
Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by:
-
Clemens Ladisch authored
Convert the snd_assert()s to simple if()s to prevent crashes when one of the timer instance ioctls is called before the file is bound to a timer device. Signed-off-by:
Clemens Ladisch <clemens@ladisch.de> Signed-off-by:
-
Yoann Padioleau authored
Parse error in ifdef or bad use of macro. Signed-off-by:
Yoann Padioleau <padator@wanadoo.fr> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Claudio Matsuoka authored
HP dx2200 and dx2250 use Micro-Star International (MSI) motherboards (models MS-7254 and MS-7297 respectively) with an ALC862 codec in threestack configuration. Adding this quirk allows correct 5.1 sound output in these systems. Signed-off-by:
Claudio Matsuoka <cmatsuoka@gmail.com> Signed-off-by:
-
Claudio Matsuoka authored
Rename ALC888_HP_NETTLE and ALC888_HP_LUCKNOW models to the more generic names ALC888_6ST_HP and ALC888_3ST_HP since HP seems to be consistent in the wiring of their 3stack and 6stack ALC888-based systems. Signed-off-by:
-
Claudio Matsuoka authored
This patch fixes 5.1 surround output for the HP Samba using the same quirk as the HP Lucknow. If HP machines are uniform in their wiring, we should rename ALC888_HP_NETTLE to ALC888_6ST_HP and ALC888_HP_LUCKNOW to ALC888_3ST_HP for generic HP 6stack and 3stack configurations. Signed-off-by:
-
Claudio Matsuoka authored
Add line-in to the list of LG LW20 capture sources. Also fix the LG LW pin assignment list comment. Signed-off-by:
-
Thibault Le Meur authored
Fixed AC3 interface in device_setup=0x00 mode thanks to Hakan Lennestal and updated documentation Signed-off-by:
Thibault Le Meur <Thibault.LeMeur@supelec.fr> Signed-off-by:
-
Matthew Ranostay authored
Added support for line out controls for STAC9202 cards, and fixed issue where master mixer control was being created twice for headphone and speaker outs. Signed-off-by:
-
Matt Reimer authored
Make s3c24xx_i2s_set_clkdiv() change the correct bits. Signed-off-by:
Matt Reimer <mreimer@vpop.net> Signed-off-by:
-
Claudio Matsuoka authored
Signed-off-by:
-
Thibault Le Meur authored
Audiophile-usb fix (corrects little-endianness in 16bit modes, resets interfaces at device initialization, and updates the documentation). Signed-off-by:
-
Claudio Matsuoka authored
Add VIA HDA identification to use the HDA-based Motorola modem of the Clevo m540 laptop. Signed-off-by:
-
Tobin Davis authored
This patch adds support for the MSI K9AGM2-FIH on-board audio. Signed-off-by:
Tobin Davis <tdavis@dsl-only.net> Signed-off-by:
-
Ritesh Raj Sarraf authored
This patch adds Logitech QuickCam USB ID for Dell's XPS M1210 notebooks. Signed-off-by:
Ritesh Raj Sarraf <rrs@researchut.com> Signed-off-by:
-
Adrian Bunk authored
This patch fixes the following compile error with CONFIG_SND_CS5530=y, CONFIG_ISA=n: <-- snip --> ... LD .tmp_vmlinux1 sound/built-in.o: In function 'snd_sb16_capture_trigger': sb16_main.c:(.text+0x212ad): undefined reference to 'snd_sbdsp_command' sb16_main.c:(.text+0x212cc): undefined reference to 'snd_sbdsp_command' sb16_main.c:(.text+0x212f7): undefined reference to 'snd_sbdsp_command' sound/built-in.o: In function 'snd_sb16_playback_trigger': sb16_main.c:(.text+0x2136d): undefined reference to 'snd_sbdsp_command' sb16_main.c:(.text+0x2138c): undefined reference to 'snd_sbdsp_command' ... <-- snip --> Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Takashi Iwai authored
Fix the default pin configuration of Abit AW9D-MAX. The board has a broken BIOS that doesn't set the correct pin default configs, which screws up the auto-configuration of snd-hda-intel driver. The patch enables the override of default pin config values. Signed-off-by:
-
Takashi Iwai authored
One of the newly added model entries causes a regression on Toshiba A100. It works fine with model=auto. So, let's deselect the entry again. Signed-off-by:
-
George Shapovalov authored
From: George Shapovalov <george@gentoo.org> Another case of ALSA ticket #3040: we need an explicit USB ID match for another Logitech camera/microphone device. Signed-off-by:
Daniel Drake <dsd@gentoo.org> Signed-off-by:
-
Takashi Iwai authored
Added a quirk for Roland EXR series. Reported by Andre Coetzee. Signed-off-by:
-
Takashi Iwai authored
Fix behaviour in poor resource conditions. With this new patch, tidied with indent and with SNDRV_PCM_TRIGGER_STOP being used. Signed-off by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Signed-off-by:
-
Takashi Iwai authored
Show the last issued command in warning messages when any communication error with CORB/RIRB occurs. Also, a bit code clean-up for composing the command value in *_send_cmd(). Signed-off-by:
-
Takashi Iwai authored
Use ARRAY_SIZE() to calculate the number of pin widgets for each codec chip. This also fixes a typo in STAC9205 code that gives a wrong number (14 instead of 12), which resulted in fatal communication errors. Signed-off-by:
-
Robert P. J. Day authored
Signed-off-by:
Robert P. J. Day <rpjday@mindspring.com> Signed-off-by:
-
Takashi Iwai authored
The check of a substream in snd_pcm_drain() might not be always correct since runtime can point a different substream (although the PCM state of each linked substream should be same, in theory). This patch fixes it. Signed-off-by:
-
Takashi Iwai authored
Added missing model entries for HD-audio codecs in the module option list. Signed-off-by:
-
Takashi Iwai authored
Added the missing model option values for ALC262. Signed-off-by:
-
Claudio Matsuoka authored
Signed-off-by:
-
Claudio Matsuoka authored
Added HP Lucknow (ALC888) 5.1 surround support based on ALC883 6-channel threestack with changes in channel routing. Signed-off-by:
-
Claudio Matsuoka authored
Fixed HP Nettle 6ch/8ch channel routing based on ALC883 sixstack and swapping rear and center/LFE in verbs and mixer settings. Signed-off-by:
-
Takashi Iwai authored
Fix the mismatch of init verb and capture mux with VAIO STAC9872. Also, changed the item names to be more intuitive. Signed-off-by:
-
Kailang Yang authored
Fixed ALC662 auto mode, wrong NIDs were chosen. Signed-off-by:
Kailang Yang <kailang@realtek.com.tw> Signed-off-by:
-
Kailang Yang authored
- Added BenQ T31-16 AMD Turion64x2 (ALC262) support - Added models for ASUS machines with ALC861 Signed-off-by:
-
Claudio Matsuoka authored
Implemented LG LW20 5.1 support based on ALC880 threestack modes. It was previously set to use one DAC and 2 jack modes, giving 2-channel output only. Analog CD playing support is still missing. Signed-off-by:
-
Paul Vojta authored
Adds mention of opl3sa2 driver to a diagnostic message for NeoMagic nm256 driver. Signed-off-by:
Paul Vojta <vojta@math.berkeley.edu> Signed-off-by:
-
Paul Vojta authored
Add Neomagic MagicWave 3D to list of supported devices for opl3sa2 driver. Signed-off-by:
-
Claudio Matsuoka authored
Added the model for HP Nettle mobo with ALC883. From: Claudio Matsuoka <cmatsuoka@gmail.com> Signed-off-by:
-
Claudio Matsuoka authored
Added the model for HP Spartan with Conexant codec chip. From: Claudio Matsuoka <cmatsuoka@gmail.com> Signed-off-by:
-
Claudio Matsuoka authored
Added a quirk for Roland Juno-G. It's simply a copy of Fantom-X with the IDs changed. From: Claudio Matsuoka <cmatsuoka@gmail.com> Signed-off-by:
-
