It doesn't make any more sense to have a opaque pointer set up by the
nvmem device. Usually, the layout isn't associated with a particular
nvmem device. Instead, let the caller who set the post process callback
provide the priv pointer.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230404172148.82422-21-srinivas.kandagatla@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There are no users anymore for the global cell_post_process callback
anymore. New users should use proper nvmem layouts.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230404172148.82422-20-srinivas.kandagatla@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In preparation of retiring the global post processing hook change this
driver to use layouts. The layout will be supplied during registration
and will be used to add the post processing hook to all added cells.
Signed-off-by: Michael Walle <michael@walle.cc>
Tested-by: Michael Walle <michael@walle.cc> # on kontron-pitx-imx8m
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230404172148.82422-19-srinivas.kandagatla@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Provide a way to modify a cell before it will get added. This is useful
to attach a custom post processing hook via a layout.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230404172148.82422-18-srinivas.kandagatla@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Instead of relying on the name the consumer is using for the cell, like
it is done for the nvmem .cell_post_process configuration parameter,
provide a per-cell post processing hook. This can then be populated by
the NVMEM provider (or the NVMEM layout) when adding the cell.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230404172148.82422-17-srinivas.kandagatla@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When a storage device like an eeprom or an mtd device probes, it
registers an nvmem device if the nvmem subsystem has been enabled (bool
symbol). During nvmem registration, if the device is using layouts to
expose dynamic nvmem cells, the core will first try to get a reference
over the layout driver callbacks. In practice there is not relationship
that can be described between the storage driver and the nvmem
layout. So there is no way we can enforce both drivers will be built-in
or both will be modules. If the storage device driver is built-in but
the layout is built as a module, instead of badly failing with an
endless probe deferral loop, lets just make a modprobe call in case the
driver was made available in an initramfs with
of_device_node_request_module(), and offer a fully functional system to
the user.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Tested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230404172148.82422-16-srinivas.kandagatla@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Make nvmem_layout_get() return -EPROBE_DEFER while the expected layout
is not available. This condition cannot be triggered today as nvmem
layout drivers are initialed as part of an early init call, but soon
these drivers will be converted into modules and be initialized with a
standard priority, so the unavailability of the drivers might become a
reality that must be taken care of.

Let's anticipate this by telling the caller the layout might not yet be
available. A probe deferral is requested in this case.

Please note this does not affect any nvmem device not using layouts,
because an early check against the "nvmem-layout" container presence
will return NULL in this case.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Tested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230404172148.82422-15-srinivas.kandagatla@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NVMEM layouts are used to generate NVMEM cells during runtime. Think of
an EEPROM with a well-defined conent. For now, the content can be
described by a device tree or a board file. But this only works if the
offsets and lengths are static and don't change. One could also argue
that putting the layout of the EEPROM in the device tree is the wrong
place. Instead, the device tree should just have a specific compatible
string.

Right now there are two use cases:
 (1) The NVMEM cell needs special processing. E.g. if it only specifies
     a base MAC address offset and you need to add an offset, or it
     needs to parse a MAC from ASCII format or some proprietary format.
     (Post processing of cells is added in a later commit).
 (2) u-boot environment parsing. The cells don't have a particular
     offset but it needs parsing the content to determine the offsets
     and length.
Co-developed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230404172148.82422-14-srinivas.kandagatla@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

A new helper has been introduced, of_request_module(). Users have been
converted, this helper can now be deleted.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230404172148.82422-13-srinivas.kandagatla@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is a new helper supposed to replace of_device_request_module(),
called of_request_module(). They are both strictly equivalent, besides
the fact the latter receives a "struct device_node" directly. Use it.

Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230404172148.82422-12-srinivas.kandagatla@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Depending on device.c for pure OF handling is considered
backwards. Let's extract the content of of_device_request_module() to
have the real logic under module.c.

The next step will be to convert users of of_device_request_module() to
use the new helper.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230404172148.82422-11-srinivas.kandagatla@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Create a specific .c file for OF related module handling.
Move of_modalias() inside as a first step.

The helper is exposed through of.h even though it is only used by core
files because the users from device.c will soon be split into an OF-only
helper in module.c as well as a device-oriented inline helper in
of_device.h. Putting this helper in of_private.h would require to
include of_private.h from of_device.h, which is not acceptable.
Suggested-by: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230404172148.82422-10-srinivas.kandagatla@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This helper does not produce a real modalias, but tries to get the
"product" compatible part of the "vendor,product" compatibles only. It
is far from creating a purely useful modalias string and does not seem
to be used like that directly anyway, so let's try to give this helper a
more meaningful name before moving there a real modalias helper (already
existing under of/device.c).

Also update the various documentations to refer to the strings as
"aliases" rather than "modaliases" which has a real meaning in the Linux
kernel.

There is no functional change.

Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Wolfram Sang <wsa@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Sebastian Reichel <sre@kernel.org>
Link: https://lore.kernel.org/r/20230404172148.82422-9-srinivas.kandagatla@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This function only needs a "struct device_node" to work, but for
convenience the author (and only user) of this helper did use a "struct
device" and put it in device.c.

Let's convert this helper to take a "struct device node" instead. This
change asks for two additional changes: renaming it "of_modalias()"
to fit the current naming, and moving it outside of device.c which will
be done in a follow-up commit.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230404172148.82422-8-srinivas.kandagatla@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is a spelling mistake in platforn-name. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230404172148.82422-7-srinivas.kandagatla@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Convert the  Amlogic Meson GX eFuse bindings to dt-schema.

Take in account the used variant with amlogic,meson-gx-efuse.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230404172148.82422-6-srinivas.kandagatla@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Convert the Amlogic Meson6 eFuse bindings to dt-schema.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230404172148.82422-5-srinivas.kandagatla@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver has a MODULE_LICENSE but is not tristate so cannot be
built as a module, unlike all its peers: make it modular to match.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Michal Simek <michal.simek@amd.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: linux-modules@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230404172148.82422-4-srinivas.kandagatla@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The SPMI PMIC register region width is fixed and should not be encoded
in the devicetree.

Amend the example with a parent pmic node with the expected
'#address-cells' and '#size-cells' and fix up the 'reg' property.

Fixes: 9664a6b5 ("dt-bindings: nvmem: add binding for QTI SPMI SDAM")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230404172148.82422-3-srinivas.kandagatla@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The helper generating an OF based modalias (of_device_get_modalias())
works fine, but due to the use of snprintf() internally it needs a
buffer one byte longer than what should be needed just for the entire
string (excluding the '\0'). Most users of this helper are sysfs hooks
providing the modalias string to users. They all provide a PAGE_SIZE
buffer which is way above the number of bytes required to fit the
modalias string and hence do not suffer from this issue.

There is another user though, of_device_request_module(), which is only
called by drivers/usb/common/ulpi.c. This request module function is
faulty, but maybe because in most cases there is an alternative, ULPI
driver users have not noticed it.

In this function, of_device_get_modalias() is called twice. The first
time without buffer just to get the number of bytes required by the
modalias string (excluding the null byte), and a second time, after
buffer allocation, to fill the buffer. The allocation asks for an
additional byte, in order to store the trailing '\0'. However, the
buffer *length* provided to of_device_get_modalias() excludes this extra
byte. The internal use of snprintf() with a length that is exactly the
number of bytes to be written has the effect of using the last available
byte to store a '\0', which then smashes the last character of the
modalias string.

Provide the actual size of the buffer to of_device_get_modalias() to fix
this issue.

Note: the "str[size - 1] = '\0';" line is not really needed as snprintf
will anyway end the string with a null byte, but there is a possibility
that this function might be called on a struct device_node without
compatible, in this case snprintf() would not be executed. So we keep it
just to avoid possible unbounded strings.

Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Peter Chen <peter.chen@kernel.org>
Fixes: 9c829c09 ("of: device: Support loading a module with OF based modalias")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230404172148.82422-2-srinivas.kandagatla@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

During fuzzing, a general protection fault is observed in
vmci_host_poll().

general protection fault, probably for non-canonical address 0xdffffc0000000019: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x00000000000000c8-0x00000000000000cf]
RIP: 0010:__lock_acquire+0xf3/0x5e00 kernel/locking/lockdep.c:4926
<- omitting registers ->
Call Trace:
 <TASK>
 lock_acquire+0x1a4/0x4a0 kernel/locking/lockdep.c:5672
 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
 _raw_spin_lock_irqsave+0xb3/0x100 kernel/locking/spinlock.c:162
 add_wait_queue+0x3d/0x260 kernel/sched/wait.c:22
 poll_wait include/linux/poll.h:49 [inline]
 vmci_host_poll+0xf8/0x2b0 drivers/misc/vmw_vmci/vmci_host.c:174
 vfs_poll include/linux/poll.h:88 [inline]
 do_pollfd fs/select.c:873 [inline]
 do_poll fs/select.c:921 [inline]
 do_sys_poll+0xc7c/0x1aa0 fs/select.c:1015
 __do_sys_ppoll fs/select.c:1121 [inline]
 __se_sys_ppoll+0x2cc/0x330 fs/select.c:1101
 do_syscall_x64 arch/x86/entry/common.c:51 [inline]
 do_syscall_64+0x4e/0xa0 arch/x86/entry/common.c:82
 entry_SYSCALL_64_after_hwframe+0x46/0xb0

Example thread interleaving that causes the general protection fault
is as follows:

CPU1 (vmci_host_poll)               CPU2 (vmci_host_do_init_context)
-----                               -----
// Read uninitialized context
context = vmci_host_dev->context;
                                    // Initialize context
                                    vmci_host_dev->context = vmci_ctx_create();
                                    vmci_host_dev->ct_type = VMCIOBJ_CONTEXT;

if (vmci_host_dev->ct_type == VMCIOBJ_CONTEXT) {
    // Dereferencing the wrong pointer
    poll_wait(..., &context->host_context);
}

In this scenario, vmci_host_poll() reads vmci_host_dev->context first,
and then reads vmci_host_dev->ct_type to check that
vmci_host_dev->context is initialized. However, since these two reads
are not atomically executed, there is a chance of a race condition as
described above.

To fix this race condition, read vmci_host_dev->context after checking
the value of vmci_host_dev->ct_type so that vmci_host_poll() always
reads an initialized context.
Reported-by: Dae R. Jeong <threeearcat@gmail.com>
Fixes: 8bf50399 ("VMCI: host side driver implementation.")
Signed-off-by: Dae R. Jeong <threeearcat@gmail.com>
Link: https://lore.kernel.org/r/ZCGFsdBAU4cYww5l@dragonetSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Create sysfs entry for CDX devices.

Sysfs entries provided in each of the CDX device detected by
the CDX controller
 - vendor id
 - device id
 - remove
 - reset of the device.
 - driver override
Signed-off-by: Puneet Gupta <puneet.gupta@amd.com>
Signed-off-by: Nipun Gupta <nipun.gupta@amd.com>
Signed-off-by: Tarak Reddy <tarak.reddy@amd.com>
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Tested-by: Nikhil Agarwal <nikhil.agarwal@amd.com>
Link: https://lore.kernel.org/r/20230313132636.31850-8-nipun.gupta@amd.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RPMsg is used as a transport communication channel. This
change introduces RPMsg driver and integrates it with the
CDX controller.
Signed-off-by: Abhijit Gangurde <abhijit.gangurde@amd.com>
Signed-off-by: Nipun Gupta <nipun.gupta@amd.com>
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Tested-by: Nikhil Agarwal <nikhil.agarwal@amd.com>
Link: https://lore.kernel.org/r/20230313132636.31850-7-nipun.gupta@amd.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

CDX controller uses MCDI interface as a protocol to
communicate with the RPU firmware and registers the
detected CDX devices on the CDX bus. It also uses
RPMsg as the communication channel with the Firmware.
Signed-off-by: Nipun Gupta <nipun.gupta@amd.com>
Signed-off-by: Puneet Gupta <puneet.gupta@amd.com>
Signed-off-by: Abhijit Gangurde <abhijit.gangurde@amd.com>
Signed-off-by: Nikhil Agarwal <nikhil.agarwal@amd.com>
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Tested-by: Nikhil Agarwal <nikhil.agarwal@amd.com>
Link: https://lore.kernel.org/r/20230313132636.31850-6-nipun.gupta@amd.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The MCDI (Management CPU Driver Interface) is used as a
protocol to communicate with the RPU firmware. It has
pre-defined set of messages for different message exchanges
between APU and RPU.
Signed-off-by: Puneet Gupta <puneet.gupta@amd.com>
Signed-off-by: Nipun Gupta <nipun.gupta@amd.com>
Signed-off-by: Tarak Reddy <tarak.reddy@amd.com>
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Tested-by: Nikhil Agarwal <nikhil.agarwal@amd.com>
Link: https://lore.kernel.org/r/20230313132636.31850-5-nipun.gupta@amd.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add CDX bus controller device tree bindings for versal-net
devices.
Signed-off-by: Nipun Gupta <nipun.gupta@amd.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Tested-by: Nikhil Agarwal <nikhil.agarwal@amd.com>
Link: https://lore.kernel.org/r/20230313132636.31850-4-nipun.gupta@amd.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add CDX bus to iommu_buses so that IOMMU probe is called
for it.
Signed-off-by: Nipun Gupta <nipun.gupta@amd.com>
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Nikhil Agarwal <nikhil.agarwal@amd.com>
Link: https://lore.kernel.org/r/20230313132636.31850-3-nipun.gupta@amd.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Introduce AMD CDX bus, which provides a mechanism for scanning
and probing CDX devices. These devices are memory mapped on
system bus for Application Processors(APUs).

CDX devices can be changed dynamically in the Fabric and CDX
bus interacts with CDX controller to rescan the bus and
rediscover the devices.
Signed-off-by: Nipun Gupta <nipun.gupta@amd.com>
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Tested-by: Nikhil Agarwal <nikhil.agarwal@amd.com>
Link: https://lore.kernel.org/r/20230313132636.31850-2-nipun.gupta@amd.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clang with W=1 reports
drivers/misc/cardreader/alcor_pci.c:98:20: error: unused function
  'alcor_mask_sd_irqs' [-Werror,-Wunused-function]
static inline void alcor_mask_sd_irqs(struct alcor_pci_priv *priv)
                   ^
drivers/misc/cardreader/alcor_pci.c:103:20: error: unused function
  'alcor_unmask_sd_irqs' [-Werror,-Wunused-function]
static inline void alcor_unmask_sd_irqs(struct alcor_pci_priv *priv)
                   ^
drivers/misc/cardreader/alcor_pci.c:111:20: error: unused function
  'alcor_mask_ms_irqs' [-Werror,-Wunused-function]
static inline void alcor_mask_ms_irqs(struct alcor_pci_priv *priv)
                   ^
drivers/misc/cardreader/alcor_pci.c:116:20: error: unused function
  'alcor_unmask_ms_irqs' [-Werror,-Wunused-function]
static inline void alcor_unmask_ms_irqs(struct alcor_pci_priv *priv)
                   ^
These functions are not used, so remove them.
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20230321000203.1730802-1-trix@redhat.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clang with W=1 reports
drivers/misc/hpilo.c:395:19: error: unused function
  'is_device_reset' [-Werror,-Wunused-function]
static inline int is_device_reset(struct ilo_hwinfo *hw)
                  ^
This function is not used, so remove it.
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20230319170447.1707655-1-trix@redhat.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is only a single user of the UUID uAPI, let's make it
part of that user.

The way it's done is to prevent compilation time breakage for
the user space that does

	#include <linux/uuid.h>

In the future MEI user space tools can switch over to use mei_uuid.h.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230310170747.22782-1-andriy.shevchenko@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We need the mainline fixes in this branch for testing and other
subsystem changes to be based properly on.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull tracing fixes from Steven Rostedt:

 - Fix setting affinity of hwlat threads in containers

   Using sched_set_affinity() has unwanted side effects when being
   called within a container. Use set_cpus_allowed_ptr() instead

 - Fix per cpu thread management of the hwlat tracer:
    - Do not start per_cpu threads if one is already running for the CPU
    - When starting per_cpu threads, do not clear the kthread variable
      as it may already be set to running per cpu threads

 - Fix return value for test_gen_kprobe_cmd()

   On error the return value was overwritten by being set to the result
   of the call from kprobe_event_delete(), which would likely succeed,
   and thus have the function return success

 - Fix splice() reads from the trace file that was broken by commit
   36e2c742 ("fs: don't allow splice read/write without explicit
   ops")

 - Remove obsolete and confusing comment in ring_buffer.c

   The original design of the ring buffer used struct page flags for
   tricks to optimize, which was shortly removed due to them being
   tricks. But a comment for those tricks remained

 - Set local functions and variables to static

* tag 'trace-v6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing/hwlat: Replace sched_setaffinity with set_cpus_allowed_ptr
  ring-buffer: remove obsolete comment for free_buffer_page()
  tracing: Make splice_read available again
  ftrace: Set direct_ops storage-class-specifier to static
  trace/hwlat: Do not start per-cpu thread if it is already running
  trace/hwlat: Do not wipe the contents of per-cpu thread data
  tracing/osnoise: set several trace_osnoise.c variables storage-class-specifier to static
  tracing: Fix wrong return in kprobe_event_gen_test.c

There is a problem with the behavior of hwlat in a container,
resulting in incorrect output. A warning message is generated:
"cpumask changed while in round-robin mode, switching to mode none",
and the tracing_cpumask is ignored. This issue arises because
the kernel thread, hwlatd, is not a part of the container, and
the function sched_setaffinity is unable to locate it using its PID.
Additionally, the task_struct of hwlatd is already known.
Ultimately, the function set_cpus_allowed_ptr achieves
the same outcome as sched_setaffinity, but employs task_struct
instead of PID.

Test case:

  # cd /sys/kernel/tracing
  # echo 0 > tracing_on
  # echo round-robin > hwlat_detector/mode
  # echo hwlat > current_tracer
  # unshare --fork --pid bash -c 'echo 1 > tracing_on'
  # dmesg -c

Actual behavior:

[573502.809060] hwlat_detector: cpumask changed while in round-robin mode, switching to mode none

Link: https://lore.kernel.org/linux-trace-kernel/20230316144535.1004952-1-costa.shul@redhat.com

Cc: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: 0330f7aa ("tracing: Have hwlat trace migrate across tracing_cpumask CPUs")
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

The comment refers to mm/slob.c which is being removed. It comes from
commit ed56829c ("ring_buffer: reset buffer page when freeing") and
according to Steven the borrowed code was a page mapcount and mapping
reset, which was later removed by commit e4c2ce82 ("ring_buffer:
allocate buffer page pointer"). Thus the comment is not accurate anyway,
remove it.

Link: https://lore.kernel.org/linux-trace-kernel/20230315142446.27040-1-vbabka@suse.cz

Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Reported-by: Mike Rapoport <mike.rapoport@gmail.com>
Suggested-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Fixes: e4c2ce82 ("ring_buffer: allocate buffer page pointer")
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Since the commit 36e2c742 ("fs: don't allow splice read/write
without explicit ops") is applied to the kernel, splice() and
sendfile() calls on the trace file (/sys/kernel/debug/tracing
/trace) return EINVAL.

This patch restores these system calls by initializing splice_read
in file_operations of the trace file. This patch only enables such
functionalities for the read case.

Link: https://lore.kernel.org/linux-trace-kernel/20230314013707.28814-1-sfoon.kim@samsung.com

Cc: stable@vger.kernel.org
Fixes: 36e2c742 ("fs: don't allow splice read/write without explicit ops")
Signed-off-by: Sung-hun Kim <sfoon.kim@samsung.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Pull tty/serial driver fixes from Greg KH:
 "Here are some small tty and serial driver fixes for 6.3-rc3 to resolve
  some reported issues.

  They include:

   - 8250 driver Kconfig issue pointed out by you that showed up in -rc1

   - qcom-geni serial driver fixes

   - various 8250 driver fixes for reported problems

   - fsl_lpuart driver fixes

   - serdev fix for regression in -rc1

   - vt.c bugfix

  All have been in linux-next for over a week with no reported problems"

* tag 'tty-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: vt: protect KD_FONT_OP_GET_TALL from unbound access
  serial: qcom-geni: drop bogus uart_write_wakeup()
  serial: qcom-geni: fix mapping of empty DMA buffer
  serial: qcom-geni: fix DMA mapping leak on shutdown
  serial: qcom-geni: fix console shutdown hang
  serdev: Set fwnode for serdev devices
  tty: serial: fsl_lpuart: fix race on RX DMA shutdown
  serial: 8250_pci1xxxx: Disable SERIAL_8250_PCI1XXXX config by default
  serial: 8250_fsl: fix handle_irq locking
  serial: 8250_em: Fix UART port type
  serial: 8250: ASPEED_VUART: select REGMAP instead of depending on it
  tty: serial: fsl_lpuart: skip waiting for transmission complete when UARTCTRL_SBK is asserted
  Revert "tty: serial: fsl_lpuart: adjust SERIAL_FSL_LPUART_CONSOLE config dependency"

Pull char/misc driver fixes from Greg KH:
 "Here are a few small char/misc/other driver subsystem patches to
  resolve reported problems for 6.3-rc3.

  Included in here are:

   - Interconnect driver fixes for reported problems

   - Memory driver fixes for reported problems

   - nvmem core fix

   - firmware driver fix for reported problem

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (23 commits)
  memory: tegra30-emc: fix interconnect registration race
  memory: tegra20-emc: fix interconnect registration race
  memory: tegra124-emc: fix interconnect registration race
  memory: tegra: fix interconnect registration race
  interconnect: exynos: drop redundant link destroy
  interconnect: exynos: fix registration race
  interconnect: exynos: fix node leak in probe PM QoS error path
  interconnect: qcom: msm8974: fix registration race
  interconnect: qcom: rpmh: fix registration race
  interconnect: qcom: rpmh: fix probe child-node error handling
  interconnect: qcom: rpm: fix registration race
  nvmem: core: return -ENOENT if nvmem cell is not found
  firmware: xilinx: don't make a sleepable memory allocation from an atomic context
  interconnect: qcom: rpm: fix probe child-node error handling
  interconnect: qcom: osm-l3: fix registration race
  interconnect: imx: fix registration race
  interconnect: fix provider registration API
  interconnect: fix icc_provider_del() error handling
  interconnect: fix mem leak when freeing nodes
  interconnect: qcom: qcm2290: Fix MASTER_SNOC_BIMC_NRT
  ...

Pull RAS fix from Borislav Petkov:

 - Flush out logged errors immediately after MCA banks configuration
   changes over sysfs have been done instead of waiting until something
   else triggers the workqueue later - another error or the polling
   interval cycle is reached

* tag 'ras_urgent_for_v6.3_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mce: Make sure logged MCEs are processed after sysfs update