- 22 Feb, 2023 25 commits
-
-
Andreas Kemnade authored
The EC firmware has a different version number than anything defined until now. Signed-off-by:
Andreas Kemnade <andreas@kemnade.info> Signed-off-by:
Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230127165828.3256170-1-andreas@kemnade.info
-
Bernhard Rosenkränzer authored
Document Mediatek mt8365-syscfg Signed-off-by:
Bernhard Rosenkränzer <bero@baylibre.com> Acked-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by:
Matthias Brugger <matthias.bgg@gmail.com> Reviewed-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by:
-
Arnd Bergmann authored
Four separate mfd drivers are in the "tmio" family, and all of them were used in now-removed PXA machines (eseries, tosa, and hx4700), so the mfd drivers and all its children can be removed as well. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Liang He authored
In arizona_clk32k_enable(), we should use pm_runtime_resume_and_get() as pm_runtime_get_sync() will increase the refcnt even when it returns an error. Signed-off-by:
Liang He <windhl@126.com> Acked-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by:
-
Jeremy Kerr authored
Simple syscon devices may require deassertion of a reset signal in order to access their register set. Rather than requiring a custom driver to implement this, we can use the generic "resets" specifiers to link a reset line to the syscon. This change adds an optional reset line to the syscon device description, and deasserts the reset if detected. Signed-off-by:
Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by:
-
Jeremy Kerr authored
Simple syscon devices may require deassertion of a reset signal in order to access their register set. This change adds the `resets` property from reset.yaml#/properties/resets (referenced through core.yaml), specifying a maxItems of 1 for a single (optional) reset descriptor. This will allow a future change to the syscon driver to implement reset control. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Brad Larson authored
Add the AMD Pensando Elba SoC system registers compatible Signed-off-by:
Brad Larson <blarson@amd.com> Acked-by:
-
Matti Lehtimäki authored
Document the qcom,msm8226-tcsr compatible. Signed-off-by:
Matti Lehtimäki <matti.lehtimaki@gmail.com> Acked-by:
-
Lee Jones authored
Signed-off-by: -
Samuel Holland authored
This removes a layer of indirection through pm_power_off() and allows the PMIC handler to be used as a fallback when firmware power off fails. This happens on boards like the Clockwork DevTerm R-01 where OpenSBI does not know how to use the PMIC to power off the board. Move the check for AXP288 to avoid registering a dummy handler. Signed-off-by:
Samuel Holland <samuel@sholland.org> [Lee: Removed superfluous new line] Signed-off-by:
-
Geert Uytterhoeven authored
Fix a misspelling of "complement". Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Jiapeng Chong authored
The function irq_to_max8925() is defined in the max8925-core.c file, but not called elsewhere, so remove this unused function. drivers/mfd/max8925-core.c:472:40: warning: unused function 'irq_to_max8925'. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3561Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by:
-
Jiapeng Chong authored
Variable rev is not effectively used in the function, so delete it. drivers/mfd/qcom-pm8xxx.c:513:6: warning: variable 'rev' set but not used. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3558Reported-by:
-
Nick Hawkins authored
Document hpe,gxp-sysreg compatible for GXP registers. Signed-off-by:
Nick Hawkins <nick.hawkins@hpe.com> Acked-by:
-
Uwe Kleine-König authored
A remove callback just returning 0 is equivalent to no remove callback at all. So drop the useless function. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Andreas Kemnade authored
TWL6032 has a few charging registers prepended before the charging registers the TWL6030 has. To be able to use common register defines declare the additional registers as additional module. At the moment this affects the access to CHARGERUSB_CTRL1 in phy-twl6030-usb. Without this patch, it is accessing the wrong register on TWL6032. The consequence is that presence of Vbus is not reported. Cc: Bin Liu <b-liu@ti.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Qiheng Lin authored
`req` is allocated in pcf50633_adc_async_read(), but adc_enqueue_request() could fail to insert the `req` into queue. We need to check the return value and free it in the case of failure. Fixes: 08c3e06a ("mfd: PCF50633 adc driver") Signed-off-by:
Qiheng Lin <linqiheng@huawei.com> Signed-off-by:
-
Lee Jones authored
No one is funding MFD maintenance. S: *Status*, one of the following: Supported: Someone is actually paid to look after this. Maintained: Someone actually looks after it. Signed-off-by: -
Bhanu Prakash Maiya authored
Add a compatible string to support the UART implementation of the cros ec interface. The driver does not support the reg and interrupt properties, so exempt them from being required for UART compatible nodes. Signed-off-by:
Bhanu Prakash Maiya <bhanumaiya@chromium.org> Co-developed-by:
Mark Hasemeyer <markhas@chromium.org> Signed-off-by:
-
ye xingchen authored
Follow the advice of the Documentation/filesystems/sysfs.rst and show() should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space. Signed-off-by:
ye xingchen <ye.xingchen@zte.com.cn> Signed-off-by:
-
Randy Dunlap authored
The cs5535-mfd driver uses CPU-specific data that is not available for ARCH=um builds, so don't allow it to be built for UML. Prevents these build errors: In file included from ../arch/x86/include/asm/olpc.h:7, from ../drivers/mfd/cs5535-mfd.c:17: ../arch/x86/include/asm/geode.h: In function ‘is_geode_gx’: ../arch/x86/include/asm/geode.h:16:31: error: ‘struct cpuinfo_um’ has no member named ‘x86_vendor’ 16 | return ((boot_cpu_data.x86_vendor == X86_VENDOR_NSC) && ../arch/x86/include/asm/geode.h:16:46: error: ‘X86_VENDOR_NSC’ undeclared (first use in this function); did you mean ‘X86_VENDOR_ANY’? 16 | return ((boot_cpu_data.x86_vendor == X86_VENDOR_NSC) && ../arch/x86/include/asm/geode.h:17:31: error: ‘struct cpuinfo_um’ has no member named ‘x86’ 17 | (boot_cpu_data.x86 == 5) && ../arch/x86/include/asm/geode.h:18:31: error: ‘struct cpuinfo_um’ has no member named ‘x86_model’ 18 | (boot_cpu_data.x86_model == 5)); ../arch/x86/include/asm/geode.h: In function ‘is_geode_lx’: ../arch/x86/include/asm/geode.h:23:31: error: ‘struct cpuinfo_um’ has no member named ‘x86_vendor’ 23 | return ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) && ../arch/x86/include/asm/geode.h:23:46: error: ‘X86_VENDOR_AMD’ undeclared (first use in this function); did you mean ‘X86_VENDOR_ANY’? 23 | return ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) && ../arch/x86/include/asm/geode.h:24:31: error: ‘struct cpuinfo_um’ has no member named ‘x86’ 24 | (boot_cpu_data.x86 == 5) && ../arch/x86/include/asm/geode.h:25:31: error: ‘struct cpuinfo_um’ has no member named ‘x86_model’ 25 | (boot_cpu_data.x86_model == 10)); Fixes: 68f5d3f3 ("um: add PCI over virtio emulation driver") Signed-off-by:Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Aren Moynihan authored
The power button can get "stuck" if the rising edge and falling edge irq are read in the same pass. This can often be triggered when resuming from suspend if the power button is released before the kernel handles the interrupt. Swapping the order of the rise and fall events makes sure that the press event is handled first, which prevents this situation. Signed-off-by:
Aren Moynihan <aren@peacevolution.org> Reviewed-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
-
Neil Armstrong authored
Document compatible for the pm8550, pm8550b, pm8550ve, pm8550vs, pmk8550. pm8010 & pmr735d SPMI PMICs Signed-off-by:
Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by:
-
Tom Fitzhenry authored
Fixes RK818 (e.g. on Pinephone Pro) to register its clock, without which dependent devices (e.g. wifi/BT, via sdio-wifi-pwrseq) fail to probe. This line was removed in commit 3633daac ("mfd: rk808: Permit having multiple PMIC instances"), but only from RK818. Fixes: 3633daac ("mfd: rk808: Permit having multiple PMIC instances") Signed-off-by:
Tom Fitzhenry <tom@tom-fitzhenry.me.uk> Reviewed-by:
Javier Martinez Canillas <javierm@redhat.com> Acked-by:
-
Lee Jones authored
Immutable branch between MFD, Extcon and I2C due for the v6.3 merge window Immutable branch between MFD, FPGA and HWMON due for the v6.3 merge window
-
- 04 Feb, 2023 3 commits
-
-
Hans de Goede authored
The Lenovo Yoga Tab 3 Pro YT3-X90F needs the same handling as the Lenovo Yogabook models. That is it needs the extcon code to: 1. Control the Vbus regulator and USB-role-switch for the micro-USB port's host/device mode switching. 2. Register a power_supply device so that the charger-chip driver can see what sort of charger (SDP/CDP/DCP) is connected. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Acked-by:
Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by:
-
Hans de Goede authored
On x86 devices with a CHT Whiskey Cove PMIC the driver for the I2C bus coming from the PMIC is responsible for instantiating the i2c_client for the charger chip. Add the necessary i2c_board_info for this. Signed-off-by:
Wolfram Sang <wsa@kernel.org> Signed-off-by:
-
Hans de Goede authored
The drivers for various CHT Whiskey Cove PMIC child-devices need to know the model, since they have model specific behavior. The DMI match table for this is shared between the child-device-drivers inside the MFD driver. Add the Lenovo Yoga Tab 3 X90F, which is a previously unknown tablet model with a CHT Whiskey Cove PMIC, to the intel_cht_wc_models enum and to the DMI match table. Signed-off-by:
-
- 30 Jan, 2023 1 commit
-
-
Ilpo Järvinen authored
Add support for PMCI-based flash access path and N6000 sec update support. Access to flash staging area is different for N6000 from that of the SPI interfaced counterparts. Introduce intel_m10bmc_flash_bulk_ops to allow interface specific differentiations for the flash access path for sec update and make m10bmc_sec_read/write() in sec update driver to use the new operations. The .flash_mutex serializes read/read. Flash update (erase+write) must use ->lock/unlock_write() to prevent reads during update (reads would timeout on setting flash MUX as BMC will prevent it). Create a type specific RSU status reg handler for N6000 because the field has moved from doorbell to auth result register. If a failure is detected while altering the flash MUX, it seems safer to try to set it back and doesn't seem harmful. Likely there are enough troubles in that case anyway so setting it back fails too (which is harmless sans the small extra delay) or just confirms that the value wasn't changed. Co-developed-by:
Tianfei zhang <tianfei.zhang@intel.com> Signed-off-by:
Russ Weight <russell.h.weight@intel.com> Signed-off-by:
Xu Yilun <yilun.xu@intel.com> Signed-off-by:
Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by:
-
- 27 Jan, 2023 10 commits
-
-
Ilpo Järvinen authored
Add the mfd driver for the Platform Management Component Interface (PMCI) based interface of Intel MAX10 BMC controller. PMCI is a software-visible interface, connected to card BMC which provided the basic functionality of read/write BMC register. The access to the register is done indirectly via a hardware controller/bridge that handles read/write/clear commands and acknowledgments for the commands. Previously, intel-m10-bmc provided sysfs under /sys/bus/spi/devices/... which is generalized in this change because not all MAX10 BMC appear under SPI anymore. Co-developed-by:
Matthew Gerlach <matthew.gerlach@linux.intel.com> Signed-off-by:
-
Ilpo Järvinen authored
The rsu status field moves from the doorbell register to the auth result register in the PMCI implementation of the MAX10 BMC. In order to prepare for that, refactor the sec update driver code to have a type specific ops that provides ->rsu_status(). Co-developed-by:
-
Ilpo Järvinen authored
RSU_STAT_* and RSU_PROG_* checks are done in more than one place in the sec update code. Move the checks into new helper functions. No function changes intended. Co-developed-by:
-
Ilpo Järvinen authored
Prefix the M10BMC defines register defines with M10BMC_N3000 to make it more obvious these are related to some board type. All current non-N3000 board types have the same layout so they'll be reused. The less generic makes it more obvious they're not meant for the generic/interface agnostic code. Reviewed-by:
-
Ilpo Järvinen authored
Access to flash staging area is different for N6000 from that of the SPI interfaced counterparts. To make it easier to differentiate flash access path, move read/write into new functions where the new access path can be easily placed into. Rework the unaligned access such the behavior it matches for both read and write. This change also renames m10bmc_sec_write() to m10bmc_sec_fw_write() as it would have a name conflict otherwise. Co-developed-by:
-
Ilpo Järvinen authored
There are different addresses for the MAX10 CSR registers. Introducing a new data structure m10bmc_csr_map for the register definition of MAX10 CSR. Provide the csr_map for SPI. Co-developed-by:
-
Ilpo Järvinen authored
Split the common code from intel-m10-bmc driver into intel-m10-bmc-core and move the SPI bus parts into an interface specific file. intel-m10-bmc-core becomes the core MFD functions which can support multiple bus interface like SPI bus. Co-developed-by:
-
Ilpo Järvinen authored
Local variables directly interact with dev_get_drvdata/dev_set_drvdata should be named ddata. Reviewed-by:
-
Ilpo Järvinen authored
BMC type specific info is currently set by a switch/case block. The size of this info is expected to grow as more dev types and features are added which would have made the switch block bloaty. Store type specific info into struct and place them into .driver_data instead because it makes things a bit cleaner. The m10bmc_type enum can be dropped as the differentiation is now fully handled by the platform info. The info member of struct intel_m10bmc that is added here is not used yet in this change but its addition logically still belongs to this change. The CSR map change that comes after this change needs to have the info member. Reviewed-by:
-
Ilpo Järvinen authored
linux/mfd/intel-m10-bmc.h is using: - pr_err(), thus include also linux/dev_printk.h - FIELD_GET(), this include also linux/bitfield.h - GENMASK(), thus include also linux/bits.h Signed-off-by:
-
- 25 Dec, 2022 1 commit
-
-
Linus Torvalds authored
-
