Move to using gpio_request() and gpio_set_value() for the MMC power
control calls.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

Signed-off-by: Jiri Pinkava <jiri.pinkava@vscht.cz>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

Signed-off-by: Jiri Pinkava <jiri.pinkava@vscht.cz>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

Signed-off-by: Jiri Pinkava <jiri.pinkava@vscht.cz>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

Signed-off-by: Jiri Pinkava <jiri.pinkava@vscht.cz>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

Signed-off-by: Jiri Pinkava <jiri.pinkava@vscht.cz>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

There is bug in USB setup code for Acer n35 (it is related directly to s3c2410,
see doc). We want suspend host port (is not connected) but device port should be
active.
Signed-off-by: Jiri Pinkava <jiri.pinkava@vscht.cz>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

All code already present for Acer n35 is useless unless MACH_N35 is defined.
Signed-off-by: Jiri Pinkava <jiri.pinkava@vscht.cz>
[ben-linux@fluff.org: minor edit of subject]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/radeon/kms/legacy: only enable load detection property on DVI-I
  drm/radeon/kms: fix panel scaling adjusted mode setup
  drivers/gpu/drm/drm_sysfs.c: sysfs files error handling
  drivers/gpu/drm/radeon/radeon_atombios.c: range check issues
  gpu: vga_switcheroo, fix lock imbalance
  drivers/gpu/drm/drm_memory.c: fix check for end of loop
  drivers/gpu/drm/via/via_video.c: fix off by one issue
  drm/radeon/kms/agp The wrong AGP chipset can cause a NULL pointer dereference
  drm/radeon/kms: r300 fix CS checker to allow zbuffer-only fastfill

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-tip:
  powernow-k8: Fix frequency reporting
  x86: Fix parse_reservetop() build failure on certain configs
  x86: Fix NULL pointer access in irq_force_complete_move() for Xen guests
  x86: Fix 'reservetop=' functionality

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  KEYS: Fix RCU handling in key_gc_keyring()
  KEYS: Fix an RCU warning in the reading of user keys

key_gc_keyring() needs to either hold the RCU read lock or hold the keyring
semaphore if it's going to scan the keyring's list.  Given that it only needs
to read the key list, and it's doing so under a spinlock, the RCU read lock is
the thing to use.

Furthermore, the RCU check added in e7b0a61b is
incorrect as holding the spinlock on key_serial_lock is not grounds for
assuming a keyring's pointer list can be read safely.  Instead, a simple
rcu_dereference() inside of the previously mentioned RCU read lock is what we
want.
Reported-by: Serge E. Hallyn <serue@us.ibm.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Acked-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>

Fix an RCU warning in the reading of user keys:

===================================================
[ INFO: suspicious rcu_dereference_check() usage. ]
---------------------------------------------------
security/keys/user_defined.c:202 invoked rcu_dereference_check() without protection!

other info that might help us debug this:

rcu_scheduler_active = 1, debug_locks = 0
1 lock held by keyctl/3637:
 #0:  (&key->sem){+++++.}, at: [<ffffffff811a80ae>] keyctl_read_key+0x9c/0xcf

stack backtrace:
Pid: 3637, comm: keyctl Not tainted 2.6.34-rc5-cachefs #18
Call Trace:
 [<ffffffff81051f6c>] lockdep_rcu_dereference+0xaa/0xb2
 [<ffffffff811aa55f>] user_read+0x47/0x91
 [<ffffffff811a80be>] keyctl_read_key+0xac/0xcf
 [<ffffffff811a8a06>] sys_keyctl+0x75/0xb7
 [<ffffffff81001eeb>] system_call_fastpath+0x16/0x1b
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>

DVI-D doesn't have analog.  This matches the avivo behavior.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

This should duplicate exactly what the ddx does for both
legacy and avivo.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2:
  ocfs2: Avoid a gcc warning in ocfs2_wipe_inode().
  ocfs2: Avoid direct write if we fall back to buffered I/O
  ocfs2_dlmfs: Fix math error when reading LVB.
  ocfs2: Update VFS inode's id info after reflink.
  ocfs2: potential ERR_PTR dereference on error paths
  ocfs2: Add directory entry later in ocfs2_symlink() and ocfs2_mknod()
  ocfs2: use OCFS2_INODE_SKIP_ORPHAN_DIR in ocfs2_mknod error path
  ocfs2: use OCFS2_INODE_SKIP_ORPHAN_DIR in ocfs2_symlink error path
  ocfs2: add OCFS2_INODE_SKIP_ORPHAN_DIR flag and honor it in the inode wipe code
  ocfs2: Reset status if we want to restart file extension.
  ocfs2: Compute metaecc for superblocks during online resize.
  ocfs2: Check the owner of a lockres inside the spinlock
  ocfs2: one more warning fix in ocfs2_file_aio_write(), v2
  ocfs2_dlmfs: User DLM_* when decoding file open flags.

The x86_64 call_rwsem_wait() treats the active state counter part of the
R/W semaphore state as being 16-bit when it's actually 32-bit (it's half
of the 64-bit state).  It should do "decl %edx" not "decw %dx".
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  i2c-core: Use per-adapter userspace device lists
  i2c: Fix probing of FSC hardware monitoring chips
  i2c-core: Erase pointer to clientdata on removal

Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf: Fix resource leak in failure path of perf_event_open()

Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  rcu: Fix RCU lockdep splat on freezer_fork path
  rcu: Fix RCU lockdep splat in set_task_cpu on fork path
  mutex: Don't spin when the owner CPU is offline or other weird cases

Using a single list for all userspace devices leads to a dead lock
on multiplexed buses in some circumstances (mux chip instantiated
from userspace). This is solved by using a separate list for each
bus segment.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Michael Lawnick <ml.lawnick@gmx.de>

Some FSC hardware monitoring chips (Syleus at least) doesn't like
quick writes we typically use to probe for I2C chips. Use a regular
byte read instead for the address they live at (0x73). These are the
only known chips living at this address on PC systems.

For clarity, this fix should not be needed for kernels 2.6.30 and
later, as we started instantiating the hwmon devices explicitly based
on DMI data. Still, this fix is valuable in the following two cases:
* Support for recent FSC chips on older kernels. The DMI-based device
  instantiation is more difficult to backport than the device support
  itself.
* Case where the DMI-based device instantiation fails, whatever the
  reason. We fall back to probing in that case, so it should work.

This fixes kernel bug #15634:
https://bugzilla.kernel.org/show_bug.cgi?id=15634Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Cc: stable@kernel.org

After discovering that a lot of i2c-drivers leave the pointer to their
clientdata dangling, it was decided to let the core handle this issue.
It is assumed that the core may access the private data after remove()
as there are no guarantees for the lifetime of such pointers anyhow (see
thread starting at http://lkml.org/lkml/2010/3/21/68)
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

gcc warns that a variable is uninitialized.  It's actually handled, but
an early return fools gcc.  Let's just initialize the variable to a
garbage value that will crash if the usage is ever broken.
Signed-off-by: Joel Becker <joel.becker@oracle.com>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  ceph: remove bad auth_x kmem_cache
  ceph: fix lockless caps check
  ceph: clear dir complete, invalidate dentry on replayed rename
  ceph: fix direct io truncate offset
  ceph: discard incoming messages with bad seq #
  ceph: fix seq counting for skipped messages
  ceph: add missing #includes
  ceph: fix leaked spinlock during mds reconnect
  ceph: print more useful version info on module load
  ceph: fix snap realm splits
  ceph: clear dir complete on d_move

It's useless, since our allocations are already a power of 2.  And it was
allocated per-instance (not globally), which caused a name collision when
we tried to mount a second file system with auth_x enabled.
Signed-off-by: Sage Weil <sage@newdream.net>

The __ variant requires caller to hold i_lock.
Signed-off-by: Sage Weil <sage@newdream.net>

If a rename operation is resent to the MDS following an MDS restart, the
client does not get a full reply (containing the resulting metadata) back.
In that case, a ceph_rename() needs to compensate by doing anything useful
that fill_inode() would have, like d_move().

It also needs to invalidate the dentry (to workaround the vfs_rename_dir()
bug) and clear the dir complete flag, just like fill_trace().
Signed-off-by: Sage Weil <sage@newdream.net>

truncate_inode_pages_range wants the end offset to align with the last byte
in a page.
Signed-off-by: Sage Weil <sage@newdream.net>

We can get old message seq #'s after a tcp reconnect for stateful sessions
(i.e., the MDS).  If we get a higher seq #, that is an error, and we
shouldn't see any bad seq #'s for stateless (mon, osd) connections.
Signed-off-by: Sage Weil <sage@newdream.net>

Increment in_seq even when the message is skipped for some reason.
Signed-off-by: Sage Weil <sage@newdream.net>

Signed-off-by: Sage Weil <sage@newdream.net>

Signed-off-by: Sage Weil <sage@newdream.net>

Decouple the client version from the server side.  Print relevant protocol
and map version info instead.
Signed-off-by: Sage Weil <sage@newdream.net>

The snap realm split was checking i_snap_realm, not the list_head, to
determine if an inode belonged in the new realm.  The check always failed,
which meant we always moved the inode, corrupting the old realm's list and
causing various crashes.

Also wait to release old realm reference to avoid possibility of use after
free.
Signed-off-by: Sage Weil <sage@newdream.net>

d_move() reorders the d_subdirs list, breaking the readdir result caching.
Unless/until d_move preserves that ordering, clear CEPH_I_COMPLETE on
rename.
Signed-off-by: Sage Weil <sage@newdream.net>

* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  watchdog: ep93xx_wdt.c fix default timout value in MODULE_PARM_DESC string.

As of 32a88aa1, __sync_filesystem() will return 0 if s_bdi is not set.
And nilfs does not set s_bdi anywhere.  I noticed this problem by the
warning introduced by the recent commit 5129a469 ("Catch filesystem
lacking s_bdi").

 WARNING: at fs/super.c:959 vfs_kern_mount+0xc5/0x14e()
 Hardware name: PowerEdge 2850
 Modules linked in: nilfs2 loop tpm_tis tpm tpm_bios video shpchp pci_hotplug output dcdbas
 Pid: 3773, comm: mount.nilfs2 Not tainted 2.6.34-rc6-debug #38
 Call Trace:
  [<c1028422>] warn_slowpath_common+0x60/0x90
  [<c102845f>] warn_slowpath_null+0xd/0x10
  [<c1095936>] vfs_kern_mount+0xc5/0x14e
  [<c1095a03>] do_kern_mount+0x32/0xbd
  [<c10a811e>] do_mount+0x671/0x6d0
  [<c1073794>] ? __get_free_pages+0x1f/0x21
  [<c10a684f>] ? copy_mount_options+0x2b/0xe2
  [<c107b634>] ? strndup_user+0x48/0x67
  [<c10a81de>] sys_mount+0x61/0x8f
  [<c100280c>] sysenter_do_call+0x12/0x32

This ensures to set s_bdi for nilfs and fixes the sync silent failure.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

With F10, model 10, all valid frequencies are in the ACPI _PST table.

Cc: <stable@kernel.org> # 33.x 32.x
Signed-off-by: Mark Langsdorf <mark.langsdorf@amd.com>
LKML-Reference: <1270065406-1814-6-git-send-email-bp@amd64.org>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Reviewed-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

The WATCHDOG_TIMEOUT macro does not exist. The default timeout value is WDT_TIMEOUT.
Fix the MODULE_PARM_DESC so that the code can compile again.
reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>