- 26 Oct, 2021 40 commits
-
-
Filipe Manana authored
Move the call to btrfs_truncate_inode_items(), and the surrounding retry loop, into a local helper function. This avoids some repetition and avoids making the next change a bit awkward due to a bit of too much indentation. This patch is part of a patch set comprised of the following patches: btrfs: check if a log tree exists at inode_logged() btrfs: remove no longer needed checks for NULL log context btrfs: do not log new dentries when logging that a new name exists btrfs: always update the logged transaction when logging new names btrfs: avoid expensive search when dropping inode items from log btrfs: add helper to truncate inode items when logging inode btrfs: avoid expensive search when truncating inode items from the log btrfs: avoid search for logged i_size when logging inode if possible btrfs: avoid attempt to drop extents when logging inode for the first time btrfs: do not commit delayed inode when logging a file in full sync mode This is patch 6/10 and test results are listed in the change log of the last patch in the set. Signed-off-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
Filipe Manana authored
Whenever we are logging a directory inode, logging that an inode exists or logging an inode that has changes in its references or xattrs, we attempt to delete items of this inode we may have previously logged (through calls to drop_objectid_items()). That attempt does a btree search for deletion, which is expensive because it always acquires write locks for extent buffers at levels 2, 1 and 0, and it balances any node that is less than half full. Acquiring the write locks can block the task if the extent buffers are already locked or block other tasks attempting to lock them, which is specially bad in case of log trees since they are small due to their short life, with a root node at a level typically not greater than level 2. If we know that we are logging the inode for the first time in the current transaction, we can skip the search. This change does that. This patch is part of a patch set comprised of the following patches: btrfs: check if a log tree exists at inode_logged() btrfs: remove no longer needed checks for NULL log context btrfs: do not log new dentries when logging that a new name exists btrfs: always update the logged transaction when logging new names btrfs: avoid expensive search when dropping inode items from log btrfs: add helper to truncate inode items when logging inode btrfs: avoid expensive search when truncating inode items from the log btrfs: avoid search for logged i_size when logging inode if possible btrfs: avoid attempt to drop extents when logging inode for the first time btrfs: do not commit delayed inode when logging a file in full sync mode This is patch 5/10 and test results are listed in the change log of the last patch in the set. Signed-off-by:
-
Filipe Manana authored
When we are logging a new name for an inode, due to a link or rename operation, if the inode has ancestor inodes that are new, created in the current transaction, we need to log that these inodes exist. To ensure that a subsequent explicit fsync on one of these ancestor inodes does sync the log, we don't set the logged_trans field of these inodes. This was done in commit 75b463d2 ("btrfs: do not commit logs and transactions during link and rename operations"), to avoid syncing a log after a rename or link operation. In order to allow for future changes to do some optimizations, change this behaviour to always update the logged_trans of any logged inode and don't update the last_log_commit of the inode if we are logging that it exists. This accomplishes that same objective with simpler logic, allowing for some optimizations in the next patches. So just do that simplification. This patch is part of a patch set comprised of the following patches: btrfs: check if a log tree exists at inode_logged() btrfs: remove no longer needed checks for NULL log context btrfs: do not log new dentries when logging that a new name exists btrfs: always update the logged transaction when logging new names btrfs: avoid expensive search when dropping inode items from log btrfs: add helper to truncate inode items when logging inode btrfs: avoid expensive search when truncating inode items from the log btrfs: avoid search for logged i_size when logging inode if possible btrfs: avoid attempt to drop extents when logging inode for the first time btrfs: do not commit delayed inode when logging a file in full sync mode This is patch 4/10 and test results are listed in the change log of the last patch in the set. Signed-off-by:
-
Filipe Manana authored
When logging a new name for an inode, due to a link or rename operation, we don't need to log all new dentries of the parent directories and their subdirectories. We only want to log the names of the inode and that any new parent directories exist. So in this case don't trigger logging of the new dentries, that is only need when doing an explicit fsync on a directory or on a file which requires logging its parent directories. This avoids unnecessary work and reduces contention on the extent buffers of a log tree. This patch is part of a patch set comprised of the following patches: btrfs: check if a log tree exists at inode_logged() btrfs: remove no longer needed checks for NULL log context btrfs: do not log new dentries when logging that a new name exists btrfs: always update the logged transaction when logging new names btrfs: avoid expensive search when dropping inode items from log btrfs: add helper to truncate inode items when logging inode btrfs: avoid expensive search when truncating inode items from the log btrfs: avoid search for logged i_size when logging inode if possible btrfs: avoid attempt to drop extents when logging inode for the first time btrfs: do not commit delayed inode when logging a file in full sync mode This is patch 3/10 and test results are listed in the change log of the last patch in the set. Signed-off-by:
-
Filipe Manana authored
Since commit 75b463d2 ("btrfs: do not commit logs and transactions during link and rename operations"), we always pass a non-NULL log context to btrfs_log_inode_parent() and therefore to all the functions that it calls. So remove the checks we have all over the place that test for a NULL log context, making the code shorter and easier to read, as well as reducing the size of the generated code. This patch is part of a patch set comprised of the following patches: btrfs: check if a log tree exists at inode_logged() btrfs: remove no longer needed checks for NULL log context btrfs: do not log new dentries when logging that a new name exists btrfs: always update the logged transaction when logging new names btrfs: avoid expensive search when dropping inode items from log btrfs: add helper to truncate inode items when logging inode btrfs: avoid expensive search when truncating inode items from the log btrfs: avoid search for logged i_size when logging inode if possible btrfs: avoid attempt to drop extents when logging inode for the first time btrfs: do not commit delayed inode when logging a file in full sync mode This is patch 2/10 and test results are listed in the change log of the last patch in the set. Signed-off-by:
-
Filipe Manana authored
In case an inode was never logged since it was loaded from disk and was modified in the current transaction (its ->last_trans matches the ID of the current transaction), inode_logged() returns true even if there's no existing log tree. In this case we can simply check if a log tree exists and return false if it does not. This avoids a caller of inode_logged() doing some unnecessary, but harmless, work. For btrfs_log_new_name() it avoids it logging an inode in case it was never logged since it was loaded from disk and there is currently no log tree for the inode's root. For the remaining callers of inode_logged(), btrfs_del_dir_entries_in_log() and btrfs_del_inode_ref_in_log(), it has no effect since they already check if a log tree exists through their calls to join_running_log_trans(). So just add a check to inode_logged() to verify if a log tree exists, and return false if it does not. This patch is part of a patch set comprised of the following patches: btrfs: check if a log tree exists at inode_logged() btrfs: remove no longer needed checks for NULL log context btrfs: do not log new dentries when logging that a new name exists btrfs: always update the logged transaction when logging new names btrfs: avoid expensive search when dropping inode items from log btrfs: add helper to truncate inode items when logging inode btrfs: avoid expensive search when truncating inode items from the log btrfs: avoid search for logged i_size when logging inode if possible btrfs: avoid attempt to drop extents when logging inode for the first time btrfs: do not commit delayed inode when logging a file in full sync mode This is patch 1/10 and test results are listed in the change log of the last patch in the set. Signed-off-by:
-
Anand Jain authored
There were few lockdep warnings because btrfs_show_devname() was using device_list_mutex as recorded in the commits: 0ccd0528 ("btrfs: fix a possible umount deadlock") 779bf3fe ("btrfs: fix lock dep warning, move scratch dev out of device_list_mutex and uuid_mutex") And finally, commit 88c14590 ("btrfs: use RCU in btrfs_show_devname for device list traversal") removed the device_list_mutex from btrfs_show_devname for performance reasons. This patch removes a stale comment about the function btrfs_show_devname and device_list_mutex. Signed-off-by:
Anand Jain <anand.jain@oracle.com> Reviewed-by:
-
Anand Jain authored
When we add a device to the seed filesystem (sprouting) it is a new filesystem (and fsid) on the device added. Update the latest_dev so that /proc/self/mounts shows the correct device. Example: $ btrfstune -S1 /dev/vg/seed $ mount /dev/vg/seed /btrfs mount: /btrfs: WARNING: device write-protected, mounted read-only. $ cat /proc/self/mounts | grep btrfs /dev/mapper/vg-seed /btrfs btrfs ro,relatime,space_cache,subvolid=5,subvol=/ 0 0 $ btrfs dev add -f /dev/vg/new /btrfs Before: $ cat /proc/self/mounts | grep btrfs /dev/mapper/vg-seed /btrfs btrfs ro,relatime,space_cache,subvolid=5,subvol=/ 0 0 After: $ cat /proc/self/mounts | grep btrfs /dev/mapper/vg-new /btrfs btrfs ro,relatime,space_cache,subvolid=5,subvol=/ 0 0 Tested-by:
Su Yue <l@damenly.su> Signed-off-by:
-
Anand Jain authored
The test case btrfs/238 reports the warning below: WARNING: CPU: 3 PID: 481 at fs/btrfs/super.c:2509 btrfs_show_devname+0x104/0x1e8 [btrfs] CPU: 2 PID: 1 Comm: systemd Tainted: G W O 5.14.0-rc1-custom #72 Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015 Call trace: btrfs_show_devname+0x108/0x1b4 [btrfs] show_mountinfo+0x234/0x2c4 m_show+0x28/0x34 seq_read_iter+0x12c/0x3c4 vfs_read+0x29c/0x2c8 ksys_read+0x80/0xec __arm64_sys_read+0x28/0x34 invoke_syscall+0x50/0xf8 do_el0_svc+0x88/0x138 el0_svc+0x2c/0x8c el0t_64_sync_handler+0x84/0xe4 el0t_64_sync+0x198/0x19c Reason: While btrfs_prepare_sprout() moves the fs_devices::devices into fs_devices::seed_list, the btrfs_show_devname() searches for the devices and found none, leading to the warning as in above. Fix: latest_dev is updated according to the changes to the device list. That means we could use the latest_dev->name to show the device name in /proc/self/mounts, the pointer will be always valid as it's assigned before the device is deleted from the list in remove or replace. The RCU protection is sufficient as the device structure is freed after synchronization. Reported-by:
-
Anand Jain authored
In preparation to fix a bug in btrfs_show_devname(). Convert fs_devices::latest_bdev type from struct block_device to struct btrfs_device and, rename the member to fs_devices::latest_dev. So that btrfs_show_devname() can use fs_devices::latest_dev::name. Tested-by:
-
Naohiro Aota authored
We will no longer write to a relocating block group. So, we can finish it now. Signed-off-by:
Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by:
-
Naohiro Aota authored
If we have written to the zone capacity, the device automatically deactivates the zone. Sync up block group side (the active BG list and zone_is_active flag) with it. We need to do it both on data BGs and metadata BGs. On data side, we add a hook to btrfs_finish_ordered_io(). On metadata side, we use end_extent_buffer_writeback(). To reduce excess lookup of a block group, we mark the last extent buffer in a block group with EXTENT_BUFFER_ZONE_FINISH flag. This cannot be done for data (ordered_extent), because the address may change due to REQ_OP_ZONE_APPEND. Signed-off-by:
-
Naohiro Aota authored
The current extent allocator tries to allocate a new block group when the existing block groups do not have enough space. On a ZNS device, a new block group means a new active zone. If the number of active zones has already reached the max_active_zones, activating a new zone needs to finish an existing zone, leading to wasting the free space there. So, instead, it should reuse the existing active block groups as much as possible when we can't activate any other zones without sacrificing an already activated block group. While at it, I converted find_free_extent_update_loop() to check the found_extent() case early and made the other conditions simpler. Signed-off-by:
-
Naohiro Aota authored
We are passing too many variables as it is from btrfs_reserve_extent() to find_free_extent(). The next commit will add min_alloc_size to ffe_ctl, and that means another pass-through argument. Take this opportunity to move ffe_ctl one level up and drop the redundant arguments. Signed-off-by:
-
Naohiro Aota authored
Activate new block group at btrfs_make_block_group(). We do not check the return value. If failed, we can try again later at the actual extent allocation phase. Signed-off-by:
-
Naohiro Aota authored
Activate a block group when trying to allocate an extent from it. We check read-only case and no space left case before trying to activate a block group not to consume the number of active zones uselessly. Signed-off-by:
-
Naohiro Aota authored
Load activeness of underlying zones of a block group. When underlying zones are active, we add the block group to the fs_info->zone_active_bgs list. Signed-off-by:
-
Naohiro Aota authored
Add zone_is_active flag to btrfs_block_group. This flag indicates the underlying zones are all active. Such zone active block groups are tracked by fs_info->active_bg_list. btrfs_dev_{set,clear}_active_zone() take responsibility for the underlying device part. They set/clear the bitmap to indicate zone activeness and count the number of zones we can activate left. btrfs_zone_{activate,finish}() take responsibility for the logical part and the list management. In addition, btrfs_zone_finish() wait for any writes on it and send REQ_OP_ZONE_FINISH to the zone. Signed-off-by: -
Naohiro Aota authored
We will use a block group's physical location to track active zones and finish fully written zones in the following commits. Since the zone activation is done in the extent allocation context which already holding the tree locks, we can't query the chunk tree for the physical locations. So, copy the location info into a block group and use it for activation. Signed-off-by:
-
Naohiro Aota authored
The ZNS specification defines a limit on the number of zones that can be in the implicit open, explicit open or closed conditions. Any zone with such condition is defined as an active zone and correspond to any zone that is being written or that has been only partially written. If the maximum number of active zones is reached, we must either reset or finish some active zones before being able to chose other zones for storing data. Load queue_max_active_zones() and track the number of active zones left on the device. Signed-off-by:
-
Naohiro Aota authored
If there is no more space left for a new superblock in a superblock zone, then it is better to ZONE_FINISH the zone and frees up the active zone count. Since btrfs_advance_sb_log() can now issue REQ_OP_ZONE_FINISH, we also need to convert it to return int for the error case. Signed-off-by:
-
Naohiro Aota authored
sb_write_pointer() returns the write position of next superblock. For READ, we need a previous location. When the pointer is at the head, the previous one is the last one of the other zone. Calculate the last one's position from zone capacity. Reviewed-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by:
-
Naohiro Aota authored
We cannot write beyond zone capacity. So, we should consider a zone as "full" when the write pointer goes beyond capacity - the size of super info. Also, take this opportunity to replace a subtle duplicated code with a loop and fix a typo in comment. Reviewed-by:
-
Naohiro Aota authored
With the introduction of zone capacity, the range [capacity, length] is always zone unusable. Counting this region as a reclaim target will cause reclaiming too early. Reclaim block groups based on bytes that can be usable after resetting. Reviewed-by:
-
Naohiro Aota authored
Now that we introduced capacity in a block group, we need to calculate free space using the capacity instead of the length. Thus, bytes we account capacity - alloc_pointer as free, and account bytes [capacity, length] as zone unusable. Reviewed-by:
-
Naohiro Aota authored
btrfs_free_excluded_extents() is not neccessary for btrfs_calc_zone_unusable() and it makes btrfs_calc_zone_unusable() difficult to reuse. Move it out and call btrfs_free_excluded_extents() in proper context. Reviewed-by:
-
Naohiro Aota authored
The ZNS specification introduces the concept of a Zone Capacity. A zone capacity is an additional per-zone attribute that indicates the number of usable logical blocks within each zone, starting from the first logical block of each zone. It is always smaller or equal to the zone size. With the SINGLE profile, we can set a block group's "capacity" as the same as the underlying zone's Zone Capacity. We will limit the allocation not to exceed in a following commit. Reviewed-by:
-
Qu Wenruo authored
With the new infrastructure which has taken subpage into consideration, now we should be safe to allow defrag to work for subpage case. Signed-off-by:
Qu Wenruo <wqu@suse.com> Reviewed-by:
-
Qu Wenruo authored
Now the old infrastructure can all be removed, defrag Signed-off-by:
-
Qu Wenruo authored
The function defrag_one_cluster() is able to defrag one range well enough, we only need to do preparation for it, including: - Clamp and align the defrag range - Exclude invalid cases - Proper inode locking The old infrastructures will not be removed in this patch, as it would be too noisy to review. Signed-off-by:
-
Qu Wenruo authored
This new helper, defrag_one_cluster(), will defrag one cluster (at most 256K): - Collect all initial targets - Kick in readahead when possible - Call defrag_one_range() on each initial target With some extra range clamping. - Update @sectors_defragged parameter This involves one behavior change, the defragged sectors accounting is no longer as accurate as old behavior, as the initial targets are not consistent. We can have new holes punched inside the initial target, and we will skip such holes later. But the defragged sectors accounting doesn't need to be that accurate anyway, thus I don't want to pass those extra accounting burden into defrag_one_range(). Signed-off-by:
-
Qu Wenruo authored
A new helper, defrag_one_range(), is introduced to defrag one range. This function will mostly prepare the needed pages and extent status for defrag_one_locked_target(). As we can only have a consistent view of extent map with page and extent bits locked, we need to re-check the range passed in to get a real target list for defrag_one_locked_target(). Since defrag_collect_targets() will call defrag_lookup_extent() and lock extent range, we also need to teach those two functions to skip extent lock. Thus new parameter, @locked, is introduced to skip extent lock if the caller has already locked the range. Signed-off-by:
-
Qu Wenruo authored
A new helper, defrag_one_locked_target(), introduced to do the real part of defrag. The caller needs to ensure both page and extents bits are locked, and no ordered extent exists for the range, and all writeback is finished. The core defrag part is pretty straight-forward: - Reserve space - Set extent bits to defrag - Update involved pages to be dirty Signed-off-by:
-
Qu Wenruo authored
Introduce a helper, defrag_collect_targets(), to collect all possible targets to be defragged. This function will not consider things like max_sectors_to_defrag, thus caller should be responsible to ensure we don't exceed the limit. This function will be the first stage of later defrag rework. Signed-off-by:
-
Qu Wenruo authored
In cluster_pages_for_defrag(), we have complex code block inside one for() loop. The code block is to prepare one page for defrag, this will ensure: - The page is locked and set up properly. - No ordered extent exists in the page range. - The page is uptodate. This behavior is pretty common and will be reused by later defrag rework. So factor out the code into its own helper, defrag_prepare_one_page(), for later usage, and cleanup the code by a little. Signed-off-by:
-
Qu Wenruo authored
When testing subpage defrag support, I always find some strange inode nbytes error, after a lot of debugging, it turns out that defrag_lookup_extent() is using PAGE_SIZE as size for lookup_extent_mapping(). Since lookup_extent_mapping() is calling __lookup_extent_mapping() with @strict == 1, this means any extent map smaller than one page will be ignored, prevent subpage defrag to grab a correct extent map. There are quite some PAGE_SIZE usage in ioctl.c, but most of them are correct usages, and can be one of the following cases: - ioctl structure size check We want ioctl structure to be contained inside one page. - real page operations The remaining cases in defrag_lookup_extent() and check_defrag_in_cache() will be addressed in this patch. Signed-off-by:
-
Qu Wenruo authored
In function cluster_pages_for_defrag() we have a window where we unlock page, either start the ordered range or read the content from disk. When we re-lock the page, we need to make sure it still has the correct page->private for subpage. Thus add the extra PagePrivate check here to handle subpage cases properly. Signed-off-by:
-
Qu Wenruo authored
Currently btrfs_defrag_file() accepts both "struct inode" and "struct file" as parameter. We can easily grab "struct inode" from "struct file" using file_inode() helper. The reason why we need "struct file" is just to re-use its f_ra. Change this to pass "struct file_ra_state" parameter, so that it's more clear what we really want. Since we're here, also add some comments on the function btrfs_defrag_file(). Reviewed-by:
-
Anand Jain authored
btrfs_chunk_readonly() checks if the given chunk is writeable. It returns 1 for readonly, and 0 for writeable. So the return argument type bool shall suffice instead of the current type int. Also, rename btrfs_chunk_readonly() to btrfs_chunk_writeable() as we check if the bg is writeable, and helps to keep the logic at the parent function simpler to understand. Signed-off-by:
-
Sidong Yang authored
Fix a warning reported by smatch that ret could be returned without initialized. The dedupe operations are supposed to to return 0 for a 0 length range but the caller does not pass olen == 0. To keep this behaviour and also fix the warning initialize ret to 0. Reviewed-by:
Sidong Yang <realwakka@gmail.com> Reviewed-by:
-
