- 13 Feb, 2014 7 commits
-
-
Florian Fainelli authored
of_get_phy_mode() uses a local array to map phy_interface_t values from include/linux/net/phy.h to a string which is read from the 'phy-mode' or 'phy-connection-type' property. In preparation for exposing the PHY interface mode through sysfs, perform the following: - mode phy_modes from drivers/of/of_net.c to include/linux/phy.h such that it is right below the phy_interface_t enum - make it a static inline function returning the string such that we can use it by just including include/linux/net/phy.h - add a PHY_INTERFACE_MODE_MAX enum value to guard the iteration in of_get_phy_mode() Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
The comments above phy_{clear,config}_interrupt used the word "on" instead of "or", when talking about the return values of the functions, fix these two typos. Signed-off-by: -
Florian Fainelli authored
Some PHYs out there can be very quirky with respect to how they would report the auto-negotiation is completed. Allow drivers to override the generic aneg_done() implementation by providing their own. Since not all drivers have been updated yet to use genphy_aneg_done() as aneg_done() callback, we explicitely check that this callback is valid before calling into it. Signed-off-by:
-
Florian Fainelli authored
In preparation for allowing PHY drivers to potentially override their auto-negotiation done callback, move the contents of phy_aneg_done() to genphy_aneg_done() since that function really is the generic implementation based on the BMSR_ANEGCOMPLETE status. Signed-off-by:
-
Florian Fainelli authored
Use a convenience function: phy_speed_to_str() which will display human readable speeds. Suggested-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Florian Fainelli authored
Update phy_print_status() to also display the PHY device pause settings (rx/tx or off). Suggested-by:
-
Florian Fainelli authored
phy_print_status() currently uses dev_name(&phydev->dev) which will usually result in printing something along those lines for Device Tree aware drivers: libphy: f0b60000.etherne:0a - Link is Down libphy: f0ba0000.etherne:00 - Link is Up - 1000/Full This is not terribly useful for network administrators or users since we expect a network interface name to be able to correlate link events with interfaces. Update phy_print_status() to use netdev_info() with phydev->attached_dev which is the backing network device for our PHY device. The leading dash is removed since netdev_info() prefixes the messages with "<interface>: " already. Signed-off-by:
-
- 12 Feb, 2014 29 commits
-
-
David S. Miller authored
Shradha Shah says: ==================== Cleanup patches for the SFC driver This patch set consists of some cleanup and housekeeping patches for the sfc driver. These patches help to reduce the differences between the in- tree and out-of-tree driver. Ben Hutchings (12): sfc: Cache skb->data in local variable in efx_ptp_rx() sfc: Rewrite adjustment of PPS event in a clearer way sfc: Replace TSOH_OFFSET with the equivalent NET_IP_ALIGN sfc: Rename 'use_options' variable in tso_start() to clearer 'use_opt_desc' sfc: Remove unused definitions of EF10 user-mode DMA descriptors sfc: Correct comment about number of TX queues used on EF10 sfc: Preserve rx_frm_trunc counters when resizing DMA rings sfc: Use canonical pointer type for MAC address in efx_set_mac_address() sfc: Update product naming sfc: Cosmetic changes to self-test from the out-of-tree driver sfc: Fail self-test with -EBUSY, not -EIO, if the device is busy sfc: Add/remove blank lines to taste Laurence Evans (1): sfc: Removed adhoc scheme to rate limit PTP event queue overflow message ==================== Signed-off-by: -
Ben Hutchings authored
Remove trailing blank lines in several files. Use only one blank line between functions. Add a blank line as a separator in a few places. Signed-off-by:
Ben Hutchings <bhutchings@solarflare.com> Signed-off-by:
Shradha Shah <sshah@solarflare.com> Signed-off-by:
-
Ben Hutchings authored
Signed-off-by:
-
Ben Hutchings authored
Signed-off-by:
-
Ben Hutchings authored
We don't use 'Solarstorm' or 'Solarflare Communications' in full any more. Signed-off-by:
-
Ben Hutchings authored
Functions such as is_valid_ether_addr() expect u8 *, so use that instead of char *. Signed-off-by:
-
Ben Hutchings authored
Signed-off-by:
-
Ben Hutchings authored
We allocate efx_channel structures with kzalloc() so we don't need to zero-initialise individual fields in efx_probe_channel(). Further, this function will be called again during DMA ring resizing and we should not reset any statistics then. Signed-off-by:
-
Ben Hutchings authored
EF10 implements option descriptors to switch TX checksum offload on and off between packets. We could therefore use a single hardware TX queue per kernel TX queue, although we don't yet. Signed-off-by:
-
Ben Hutchings authored
These DMA descriptor types will only be used by the userland networking stack. Signed-off-by:
-
Ben Hutchings authored
If CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is defined then NET_IP_ALIGN will be defined as 0, so this macro is redundant. Signed-off-by:
-
Ben Hutchings authored
There is substantial latency in generation and handling of PPS events from the NIC, which we have to correct for before passing a host timestamp to the PPS subsystem. We compare clocks with the MC, giving us two offsets to subtract from the timestamp generated by pps_get_ts(): (a) Time from the last good sync (where we got host and NIC timestamps for nearly the same instant) to the time we called pps_get_ts() (b) Time from NIC top of second to the last good sync We currently calculate (a) + (b) in a quite confusing way. Instead, calculate (a) completely, then add (b) to it. Signed-off-by: -
Ben Hutchings authored
Signed-off-by:
-
Laurence Evans authored
Use conventional net_ratelimit() instead. Signed-off-by:
-
David S. Miller authored
Ben Hutchings says: ==================== ethtool: Improve documentation This series converts most comments in <linux/ethtool.h> into kernel-doc format, and expands them to describe the semantics as well as I understand them. It also fixes some kernel-doc formatting errors. I started on this at Solarflare, but they graciously allowed me to take it away and finish it off. ==================== Signed-off-by: -
Ben Hutchings authored
A colon almost unavoidably starts a new section. The script should be changed to provide a way to avoid this, but for now reword the comments to avoid using colons. Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Ben Hutchings authored
The kernel-doc script does not tolerate the macro definition in between. Signed-off-by:
-
Ben Hutchings authored
Various ethtool command structures are declared with zero-length array at the end which are intended to be variable-length in userland (relying on lack of compiler bounds checking). However, in the kernel the structure and array are always allocated and passed to driver operations separately. Make that explicit. Signed-off-by:
-
Ben Hutchings authored
Signed-off-by:
-
Ben Hutchings authored
Signed-off-by:
-
Ben Hutchings authored
Signed-off-by:
-
Ben Hutchings authored
Signed-off-by:
-
Ben Hutchings authored
Convert the inline comments to kernel-doc format. Explicitly specify that non-zero autoneg is an error if link autonegotiation is disabled. Specify that pause capabilities should be advertised dependent on link autonegotiation, not the autoneg flag here. There is no way to opt-out of pause frame autonegotiation, and this improves behaviour when the link partner is configured to follow pause frame autonegotiation and our interface is not. Signed-off-by:
-
Ben Hutchings authored
Signed-off-by:
-
Ben Hutchings authored
Signed-off-by:
-
Ben Hutchings authored
Signed-off-by:
-
Ben Hutchings authored
Signed-off-by:
-
Ben Hutchings authored
Replace the inline comments (and some others below) with a full explanation of the semantics, in kernel-doc format. Specify which strings may be empty. Document the relationship with other commands. Replace the 'deprecation' of some fields with a proper explanation of the conversion to generalised string sets, as userland programs may not be able to assume that ETHTOOL_GSSET_INFO is available. Signed-off-by:
-
Ben Hutchings authored
struct ethtool_cmd has very limited documentation; it contains several obscure or obsolete fields and several with non-obvious interpretation. Replace the inline comments (and some others below) with a full explanation of the semantics as well as I understand them, in kernel-doc format. Formally deprecate some fields that seem to be of historical use only. Extend the comment about 32/64-bit compatibility to cover all ethtool structures. Signed-off-by:
-
- 11 Feb, 2014 4 commits
-
-
git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds authored
Pull microblaze fixes from Michal Simek: - Fix two compilation issues - HZ, readq/writeq - Fix stack protection support * tag 'microblaze-3.14-rc3' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Fix a typo when disabling stack protection microblaze: Define readq and writeq IO helper function microblaze: Fix missing HZ macro
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 bugfixes from Martin Schwidefsky: "A collection a bug fixes. Most of them are minor but two of them are more severe. The linkage stack bug can be used by user space to force an oops, with panic_on_oops this is a denial-of-service. And the dump memory detection issue can cause incomplete memory dumps" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/cio: improve cio_commit_config s390: fix kernel crash due to linkage stack instructions s390/dump: Fix dump memory detection s390/appldata: restore missing init_virt_timer() s390/qdio: correct program-controlled interruption checking s390/qdio: for_each macro correctness
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking updates from David Miller: 1) Fix flexcan build on big endian, from Arnd Bergmann 2) Correctly attach cpsw to GPIO bitbang MDIO drive, from Stefan Roese 3) udp_add_offload has to use GFP_ATOMIC since it can be invoked from non-sleepable contexts. From Or Gerlitz 4) vxlan_gro_receive() does not iterate over all possible flows properly, fix also from Or Gerlitz 5) CAN core doesn't use a proper SKB destructor when it hooks up sockets to SKBs. Fix from Oliver Hartkopp 6) ip_tunnel_xmit() can use an uninitialized route pointer, fix from Eric Dumazet 7) Fix address family assignment in IPVS, from Michal Kubecek 8) Fix ath9k build on ARM, from Sujith Manoharan 9) Make sure fail_over_mac only applies for the correct bonding modes, from Ding Tianhong 10) The udp offload code doesn't use RCU correctly, from Shlomo Pongratz 11) Handle gigabit features properly in generic PHY code, from Florian Fainelli 12) Don't blindly invoke link operations in rtnl_link_get_slave_info_data_size, they are optional. Fix from Fernando Luis Vazquez Cao 13) Add USB IDs for Netgear Aircard 340U, from Bjørn Mork 14) Handle netlink packet padding properly in openvswitch, from Thomas Graf 15) Fix oops when deleting chains in nf_tables, from Patrick McHardy 16) Fix RX stalls in xen-netback driver, from Zoltan Kiss 17) Fix deadlock in mac80211 stack, from Emmanuel Grumbach 18) inet_nlmsg_size() forgets to consider ifa_cacheinfo, fix from Geert Uytterhoeven 19) tg3_change_mtu() can deadlock, fix from Nithin Sujir 20) Fix regression in setting SCTP local source addresses on accepted sockets, caused by some generic ipv6 socket changes. Fix from Matija Glavinic Pecotic 21) IPPROTO_* must be pure defines, otherwise module aliases don't get constructed properly. Fix from Jan Moskyto 22) IPV6 netconsole setup doesn't work properly unless an explicit source address is specified, fix from Sabrina Dubroca 23) Use __GFP_NORETRY for high order skb page allocations in sock_alloc_send_pskb and skb_page_frag_refill. From Eric Dumazet 24) Fix a regression added in netconsole over bridging, from Cong Wang 25) TCP uses an artificial offset of 1ms for SRTT, but this doesn't jive well with TCP pacing which needs the SRTT to be accurate. Fix from Eric Dumazet 26) Several cases of missing header file includes from Rashika Kheria 27) Add ZTE MF667 device ID to qmi_wwan driver, from Raymond Wanyoike 28) TCP Small Queues doesn't handle nonagle properly in some corner cases, fix from Eric Dumazet 29) Remove extraneous read_unlock in bond_enslave, whoops. From Ding Tianhong 30) Fix 9p trans_virtio handling of vmalloc buffers, from Richard Yao * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (136 commits) 6lowpan: fix lockdep splats alx: add missing stats_lock spinlock init 9p/trans_virtio.c: Fix broken zero-copy on vmalloc() buffers bonding: remove unwanted bond lock for enslave processing USB2NET : SR9800 : One chip USB2.0 USB2NET SR9800 Device Driver Support tcp: tsq: fix nonagle handling bridge: Prevent possible race condition in br_fdb_change_mac_address bridge: Properly check if local fdb entry can be deleted when deleting vlan bridge: Properly check if local fdb entry can be deleted in br_fdb_delete_by_port bridge: Properly check if local fdb entry can be deleted in br_fdb_change_mac_address bridge: Fix the way to check if a local fdb entry can be deleted bridge: Change local fdb entries whenever mac address of bridge device changes bridge: Fix the way to find old local fdb entries in br_fdb_change_mac_address bridge: Fix the way to insert new local fdb entries in br_fdb_changeaddr bridge: Fix the way to find old local fdb entries in br_fdb_changeaddr tcp: correct code comment stating 3 min timeout for FIN_WAIT2, we only do 1 min net: vxge: Remove unused device pointer net: qmi_wwan: add ZTE MF667 3c59x: Remove unused pointer in vortex_eisa_cleanup() net: fix 'ip rule' iif/oif device rename ... -
Eric Dumazet authored
When a device ndo_start_xmit() calls again dev_queue_xmit(), lockdep can complain because dev_queue_xmit() is re-entered and the spinlocks protecting tx queues share a common lockdep class. Same issue was fixed for bonding/l2tp/ppp in commits 0daa2303 ("[PATCH] bonding: lockdep annotation") 49ee4920 ("bonding: set qdisc_tx_busylock to avoid LOCKDEP splat") 23d3b8bf ("net: qdisc busylock needs lockdep annotations ") 303c07db ("ppp: set qdisc_tx_busylock to avoid LOCKDEP splat ") Reported-by:
Alexander Aring <alex.aring@gmail.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Tested-by:
-
