- 20 Feb, 2024 9 commits
-
-
Michał Winiarski authored
SLPC is not used at "hwconfig" stage. Move the initialization of data structures used for SLPC to a later point in probe. Also - move the xe_guc_pc_init_early to happen just prior to initial "hwconfig" load. Signed-off-by:
Michał Winiarski <michal.winiarski@intel.com> Reviewed-by:
Matthew Brost <matthew.brost@intel.com> Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240219130530.1406044-3-michal.winiarski@intel.com
-
Michał Winiarski authored
Similar to GuC, we're using system memory for the initial stage, and move the image to vram when it's available for subsequent loads (e.g. after reset). Signed-off-by:
-
Michał Winiarski authored
GuC load will need to happen at an earlier point in probe, where local memory is not yet available. Use system memory for GuC data structures used for initial "hwconfig" load, and realloc at a later, "post-hwconfig" load if needed, when local memory is available. Signed-off-by:
-
Lucas De Marchi authored
Bring changes from drm-misc-next that got merged in drm-next back to drm-xe so they can be used for additional features. Signed-off-by:Lucas De Marchi <lucas.demarchi@intel.com>
-
Matthew Brost authored
Compact 64k PTEs are only intended to be used within a single VMA which covers the entire 2MB range of the compact 64k PTEs. Add XE_VMA_PTE_COMPACT VMA flag to indicate compact 64k PTEs are used and update xe_vma_max_pte_size to return at least 2MB if set. v2: Include missing changes Fixes: 8f33b4f0 ("drm/xe: Avoid doing rebinds") Fixes: c47794bd ("drm/xe: Set max pte size when skipping rebinds") Reported-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/758Signed-off-by:
Thomas Hellström <thomas.hellstrom@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240219211942.3633795-4-matthew.brost@intel.com
-
Matthew Brost authored
Add XE_VMA_PTE_64K VMA flag to ensure skipping rebinds does not cross 64k page boundaries. Fixes: 8f33b4f0 ("drm/xe: Avoid doing rebinds") Fixes: c47794bd ("drm/xe: Set max pte size when skipping rebinds") Signed-off-by:
-
Matthew Brost authored
xe_vma_set_pte_size had a return value and did not set the 4k VMA flag. Both of these were incorrect. Fix these. Fixes: c47794bd ("drm/xe: Set max pte size when skipping rebinds") Signed-off-by:
-
Priyanka Dandamudi authored
Enhanced xe_bo_move trace to be more readable. It will help to show the migration details. Src and dst details. v2: Modify trace_xe_bo_move(), it takes the integer mem_type rather than a string. Make mem_type_to_name() extern, it will be used by trace.(Thomas) v3: Move mem_type_to_name() to xe_bo.[ch] (Thomas, Matt) v4: Add device details to reduce ambiquity related to vram0/vram1. (Oak) v5: Rename mem_type_to_name to xe_mem_type_to_name. (Thomas) v6: Optimised code to use xe_bo_device(__entry->bo). (Thomas) Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Oak Zeng <oak.zeng@intel.com> Cc: Kempczynski Zbigniew <Zbigniew.Kempczynski@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Brian Welty <brian.welty@intel.com> Signed-off-by:
Priyanka Dandamudi <priyanka.dandamudi@intel.com> Reviewed-by:
Oak Zeng <oak.zeng@intel.com> Reviewed-by:
-
Lucas De Marchi authored
Now that all the issues with 32bits are fixed, enable it again. Reviewed-by:
Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
-
- 19 Feb, 2024 1 commit
-
-
Thomas Hellström authored
Persistent exec_queues delays explicit destruction of exec_queues until they are done executing, but destruction on process exit is still immediate. It turns out no UMD is relying on this functionality, so remove it. If there turns out to be a use-case in the future, let's re-add. Persistent exec_queues were never used for LR VMs v2: - Don't add an "UNUSED" define for the missing property (Lucas, Rodrigo) v3: - Remove the remaining struct xe_exec_queue::persistent state (Niranjana, Lucas) Fixes: dd08ebf6 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Francois Dugast <francois.dugast@intel.com> Signed-off-by:
José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240209113444.8396-1-thomas.hellstrom@linux.intel.com
-
- 16 Feb, 2024 2 commits
-
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
drm-misc-next for v6.9: UAPI Changes: Cross-subsystem Changes: arch: - powerpc/ps3: select CONFIG_VIDEO Core Changes: ci: - msm: fix apq8016 runner display: - use newer DRM print helpers documentation: - fix typos print: - add device-specific error and debug printers sysfb: - set Linux parent device for firmware framebuffer tests: - mm: use newer DRM print helpers Driver Changes: bridge: - switch to ->read_edid callback throughout the bridge drivers - remove old ->get_edid callback i915: - use newer DRM print helpers lima: - improve stability by fixes to error handling and recovery mediathek: - switch to ->read_edid callback msm: - switch to ->read_edid callback omap: - switch to ->read_edid callback panel: - add Powkiddy RGB10MAX3 plus DT bindings - st7703: support panel rotation plus DT bindings rockchip: - DT bindings: remove port, add power-domains xe: - use newer DRM print helpers xlnx: - switch to ->read_edid callback Signed-off-by:
Dave Airlie <airlied@redhat.com> # -----BEGIN PGP SIGNATURE----- # # iQEzBAABCgAdFiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAmXOD/oACgkQaA3BHVML # eiMWMAgArTVXF4UQ+FUxYZB5QTm2veYIpilvwmzaQLNxsM9SsWpzwMIVAi+xf93g # uqUqkl6QvZ9pJg6bxuXRNcJw/GObIO4x6tn+LkbccczgHiHwvn6ydNdUoMx8ulne # EsGC0z8bb5Gpwh9b/pnBul2AoIE7PHAJltgH271/O2xnhFMUbchQ0ckHvWnn8/GA # Nef145ySX4gkYtY8u2TRr4r6Bkp7Tpiyv6ipU7Cpu7KqyveTDMx3c9r5FaiHnJT/ # Hx/5s87q0Bx2m+iNjlBLJzYjF2UWth+pbfiu3xwyWOE7hdkPLwCQ5mqHWcFFqxfb # Vuj9jP+Vb68L7EvGpq2LArLdhZjHIQ== # =SsjX # -----END PGP SIGNATURE----- # gpg: Signature made Thu 15 Feb 2024 23:22:02 AEST # gpg: using RSA key 7217FBAC8CE9CF6344A168E5680DC11D530B7A23 # gpg: Can't check signature: No public key From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20240215132610.GA1464@localhost.localdomain
-
Dave Airlie authored
Merge tag 'drm-intel-gt-next-2024-02-15' of git://anongit.freedesktop.org/drm/drm-intel into drm-next UAPI Changes: - Add GuC submission interface version query (Tvrtko Ursulin) Driver Changes: Fixes/improvements/new stuff: - Atomically invalidate userptr on mmu-notifier (Jonathan Cavitt) - Update handling of MMIO triggered reports (Umesh Nerlige Ramappa) - Don't make assumptions about intel_wakeref_t type (Jani Nikula) - Add workaround 14019877138 [xelpg] (Tejas Upadhyay) - Allow for very slow HuC loading [huc] (John Harrison) - Flush context destruction worker at suspend [guc] (Alan Previn) - Close deregister-context race against CT-loss [guc] (Alan Previn) - Avoid circular locking issue on busyness flush [guc] (John Harrison) - Use rc6.supported flag from intel_gt for rc6_enable sysfs (Juan Escamilla) - Reflect the true and current status of rc6_enable (Juan Escamilla) - Wake GT before sending H2G message [mtl] (Vinay Belgaumkar) - Restart the heartbeat timer when forcing a pulse (John Harrison) Future platform enablement: - Extend driver code of Xe_LPG to Xe_LPG+ [xelpg] (Harish Chegondi) - Extend some workarounds/tuning to gfx version 12.74 [xelpg] (Matt Roper) Miscellaneous: - Reconcile Excess struct member kernel-doc warnings (Randy Dunlap) - Change wa and EU_PERF_CNTL registers to MCR type [guc] (Shuicheng Lin) - Add flex arrays to struct i915_syncmap (Erick Archer) - Increasing the sleep time for live_rc6_manual [selftests] (Anirban Sk) Signed-off-by:
-
- 15 Feb, 2024 3 commits
-
-
git://anongit.freedesktop.org/drm/drm-intelDave Airlie authored
drm/i915 feature pull for v6.9: Features and functionality: - Early transport for panel replay and PSR (Jouni) - New ARL PCI IDs (Matt) - DP TPS4 PHY test pattern support (Khaled) Refactoring and cleanups: - Unify and improve VSC SDP for PSR and non-PSR cases (Jouni) - Refactor memory regions and improve debug logging (Ville) - Rework global state serialization (Ville) - Remove unused CDCLK divider fields (Gustavo) - Unify HDCP connector logging format (Jani) - Use display instead of graphics version in display code (Jani) - Move VBT and opregion debugfs next to the implementation (Jani) - Abstract opregion interface, use opaque type (Jani) Fixes: - Fix MTL stolen memory access (Ville) - Fix initial display plane readout for MTL (Ville) - Fix HPD handling during driver init/shutdown (Imre) - Cursor vblank evasion fixes (Ville) - Various VSC SDP fixes (Jouni) - Allow PSR mode changes without full modeset (Jouni) - Fix CDCLK sanitization on module load for Xe2_LPD (Gustavo) - Fix the max DSC bpc supported by the source (Ankit) - Add missing LNL ALPM AUX wake configuration (Jouni) - Cx0 PHY state readout and verify fixes (Mika) - Fix PSR (panel replay) debugfs for MST connectors (Imre) - Fail HDCP repeater authentication if Type1 device not present (Suraj) - Ratelimit debug logging in vm_fault_ttm (Nirmoy) - Use a fake PCH for MTL because south display is not on the PCH (Haridhar) - Disable DSB for Xe driver for now (José) - Fix some LNL display register changes (Lucas) - Fix build on ChromeOS (Paz Zcharya) - Preserve current shared DPLL for fastsets on Type-C ports (Ville) - Fix state checker warnings for MG/TC/TBT PLLs (Ville) - Fix HDCP repeater ctl register value on errors (Jani) - Allow FBC with CCS modifiers on SKL+ (Ville) - Fix HDCP GGTT pinning (Ville) DRM core changes: - Add ratelimited drm dbg print (Nirmoy) - DPCD PSR early transport macro (Jouni) Merges: - Backmerge drm-next to bring Xe driver to drm-intel-next (Jani) Signed-off-by:
-
Arnd Bergmann authored
clang-16 warns about a cast between incompatible function types: drivers/gpu/drm/xe/xe_range_fence.c:155:10: error: cast from 'void (*)(const void *)' to 'void (*)(struct xe_range_fence *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict] 155 | .free = (void (*)(struct xe_range_fence *rfence)) kfree, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Avoid this with a trivial helper function that calls kfree() here. v2: - s/* rfence/*rfence/ (Thomas) Fixes: 845f64bd ("drm/xe: Introduce a range-fence utility") Signed-off-by:Arnd Bergmann <arnd@arndb.de> Reviewed-by:
-
John Harrison authored
The context persistence code does things like send super high priority heartbeat pulses to ensure any leaked context can still be pre-empted and thus isn't a total denial of service but only a minor denial of service. Unfortunately, it wasn't bothering to restart the heartbeat worker with a fresh timeout. Thus, if a persistent context happened to be closed just before the heartbeat was going to go ping anyway then the forced pulse would get a negligble execution time. And as the forced pulse is super high priority, the worker thread's next step is a reset. Which means a potentially innocent system randomly goes boom when attempting to close a context. So, force a re-schedule of the worker thread with the appropriate timeout. Signed-off-by:
John Harrison <John.C.Harrison@Intel.com> Reviewed-by:
Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240110210216.4125092-1-John.C.Harrison@Intel.com
-
- 14 Feb, 2024 13 commits
-
-
Matthew Brost authored
struct xe_exec_queue bind.fence_* members are unused. Remove these. Signed-off-by:
-
Tvrtko Ursulin authored
Add a new query to the GuC submission interface version. Mesa intends to use this information to check for old firmware versions with a known bug where using the render and compute command streamers simultaneously can cause GPU hangs due issues in firmware scheduling. Based on patches from Vivaik and Joonas. Compile tested only. v2: * Added branch version. Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Kenneth Graunke <kenneth@whitecape.org> Cc: Jose Souza <jose.souza@intel.com> Cc: Sagar Ghuge <sagar.ghuge@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Vivaik Balasubrawmanian <vivaik.balasubrawmanian@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by:
-
Dmitry Baryshkov authored
If the ADV7511 bridge driver is compiled as a module, while DRM_MSM is built-in, the clk_disable_unused congests with the runtime PM handling of the DSI PHY for the clk_prepare_lock(). This causes apq8016 runner to fail without completing any jobs ([1]). Drop the BM_CMDLINE which duplicate the command line from the .baremetal-igt-arm64 clause and enforce the clk_ignore_unused kernelarg instead to make apq8016 runner work. [1] https://gitlab.freedesktop.org/drm/msm/-/jobs/54990475 Fixes: 0119c894 ("drm: Add initial ci/ subdirectory") Reviewed-by:
Javier Martinez Canillas <javierm@redhat.com> Signed-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by:
Helen Koike <helen.koike@collabora.com> Signed-off-by:
-
Randy Dunlap authored
Correct a spello/typo in comments. Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: dri-devel@lists.freedesktop.org Reviewed-by:
Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by:
-
Randy Dunlap authored
Fix some typos and punctuation. Signed-off-by:
-
Thomas Zimmermann authored
If the firmware framebuffer has been reloacted, the sysfb code fixes the screen_info state before it creates the framebuffer's platform device. Efifb will automatically receive a screen_info with updated values. Hence remove the tracking from efifb. Signed-off-by:
Sui Jingfeng <sui.jingfeng@linux.dev> Link: https://patchwork.freedesktop.org/patch/msgid/20240212090736.11464-9-tzimmermann@suse.de
-
Thomas Zimmermann authored
On ARM PCI systems, the PCI hierarchy might be reconfigured during boot and the firmware framebuffer might move as a result of that. The values in screen_info will then be invalid. Work around this problem by tracking the framebuffer's initial location before it get relocated; then fix the screen_info state between reloaction and creating the firmware framebuffer's device. This functionality has been lifted from efifb. See the commit message of commit 55d728a4 ("efi/fb: Avoid reconfiguration of BAR that covers the framebuffer") for more information. Signed-off-by:
-
Thomas Zimmermann authored
There will be no EFI framebuffer device for disabled parent devices and thus we never probe efifb in that case. Hence remove the tracking code from efifb. Signed-off-by:
-
Thomas Zimmermann authored
Test if the firmware framebuffer's parent PCI device, if any, has been enabled. If not, the firmware framebuffer is most likely not working. Hence, do not create a device for the firmware framebuffer on disabled PCI devices. So far, efifb tracked the status of the PCI parent device internally and did not bind if it was disabled. This patch implements the functionality for all PCI-based firmware framebuffers. v3: * make commit message more precise (Sui) v2: * rework sysfb_pci_dev_is_enabled() (Javier) Signed-off-by:
-
Thomas Zimmermann authored
The EFI device has the correct parent device set. This allows Linux to handle the power management internally. Hence, remove the manual PM management for the parent device from efifb. Signed-off-by:
-
Thomas Zimmermann authored
Set the firmware framebuffer's parent device, which usually is the graphics hardware's physical device. Integrates the framebuffer in the Linux device hierarchy and lets Linux handle dependencies among devices. For example, the graphics hardware won't be suspended while the firmware device is still active. v4: * fix build for CONFIG_SYSFB_SIMPLEFB=n, again v3: * fix build for CONFIG_SYSFB_SIMPLEFB=n (Sui) * test result of screen_info_pci_dev() for errors (Sui) v2: * detect parent device in sysfb_parent_dev() Signed-off-by:
-
Thomas Zimmermann authored
Add screen_info_get_pci_dev() to find the PCI device of an instance of screen_info. Does nothing on systems without PCI bus. v3: * search PCI device with pci_get_base_class() (Sui) v2: * remove ret from screen_info_pci_dev() (Javier) Signed-off-by:
-
Thomas Zimmermann authored
The plain values as stored in struct screen_info need to be decoded before being used. Add helpers that decode the type of video output and the framebuffer I/O aperture. Old or non-x86 systems may not set the type of video directly, but only indicate the presence by storing 0x01 in orig_video_isVGA. The decoding logic in screen_info_video_type() takes this into account. It then follows similar code in vgacon's vgacon_startup() to detect the video type from the given values. A call to screen_info_resources() returns all known resources of the given screen_info. The resources' values have been taken from existing code in vgacon and vga16fb. These drivers can later be converted to use the new interfaces. v2: * return ssize_t from screen_info_resources() * don't call __screen_info_has_lfb() unnecessarily Signed-off-by:
-
- 13 Feb, 2024 12 commits
-
-
José Roberto de Souza authored
Due to a bug in GuC firmware, Mesa can't enable by default the usage of compute engines in DG2 and newer. A new GuC firmware fixed the issue but until now there was no way for Mesa to know if KMD was running with the fixed GuC version or not, so this uAPI is required. It may be expanded in future to query other firmware versions too. This is querying XE_UC_FW_VER_COMPATIBILITY/submission version because that is also supported by VFs, while XE_UC_FW_VER_RELEASE don't. i915 uAPI: https://patchwork.freedesktop.org/series/129627/ Mesa usage: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25233 v2: - fixed drm_xe_query_uc_fw_version documentation - moved branch_ver as the first version number Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Francois Dugast <francois.dugast@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
-
Johan Jonker authored
Most Rockchip hdmi nodes are part of a power domain. Add a power-domains property and include it to the example with some reordering to align with the (new) documentation about property ordering. Signed-off-by:
Johan Jonker <jbx6244@gmail.com> Acked-by:
Conor Dooley <conor.dooley@microchip.com> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/5c45527a-e218-40a3-8e71-a5815417e5f7@gmail.com
-
Johan Jonker authored
The hdmi-connector nodes are now functional and the new way to model hdmi ports nodes with both in and output port subnodes. Unfortunately with the conversion to YAML the old method with only an input port node was used. Later the new method was also added to the binding. A binding must be unambiguously, so remove the old port property entirely and make port@0 and port@1 a requirement as all upstream dts files are updated as well and because checking deprecated stuff is a bit pointless. Update the example to avoid use of the removed property. Signed-off-by:
Rob Herring <robh@kernel.org> Acked-by:
-
Chris Morgan authored
Add support for panel rotation to ST7703 based devices. Signed-off-by:
Chris Morgan <macromorgan@hotmail.com> Reviewed-by:
Guido Günther <agx@sigxcpu.org> Signed-off-by:
-
Chris Morgan authored
Document the rotation property for rocktech,jh057n00900 panels. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by:
-
Chris Morgan authored
The Powkiddy RGB10MAX3 is a handheld device with a 5 inch 720x1280 display panel with a Sitronix ST7703 display controller. The panel is installed rotated 270 degrees. Signed-off-by:
Jessica Zhang <quic_jesszhan@quicinc.com> Signed-off-by:
-
Chris Morgan authored
The RGB10MAX3 panel is a panel specific to the Powkiddy RGB10MAX3 handheld device that measures 5 inches diagonally with a resolution of 720x1280. Signed-off-by:
-
Ricardo B. Marliere authored
Since commit d492cc25 ("driver core: device.h: make struct bus_type a const *"), the driver core can properly handle constant struct bus_type, move the host1x_bus_type variable to be a constant structure as well, placing it into read-only memory which can not be modified at runtime. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Suggested-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Ricardo B. Marliere <ricardo@marliere.net> Reviewed-by:
Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240213-bus_cleanup-host1x-v1-1-54ec51b5d14f@marliere.net
-
Michal Wajdeczko authored
VF drivers can't operate on MCR registers. Make sure that driver is not trying to read nor write using any of MCR register. Signed-off-by:
Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Reviewed-by:
-
Michal Wajdeczko authored
PAT programming can only be done by the PF driver. Besides VF drivers don't have access to control registers. Signed-off-by:
-
Michal Wajdeczko authored
Registers used by hwmon are not available for VF drivers. Signed-off-by:
Badal Nilawar <badal.nilawar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240213154355.1221-7-michal.wajdeczko@intel.com
-
Michal Wajdeczko authored
It is PF driver responsibility to verify that LMEM was correctly initialized, also VF drivers don't have access to GU_CNTL register. Signed-off-by:
-
