- 06 Apr, 2015 3 commits
-
-
Moritz Fischer authored
Add a generic SYSCON register mapped poweroff mechanism. Signed-off-by:
Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by:
Sebastian Reichel <sre@kernel.org>
-
Beomho Seo authored
This patch add missed blank line after decalations. Signed-off-by:
Beomho Seo <beomho.seo@samsung.com> Reviewed-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by:
-
Beomho Seo authored
Currently, max17042 battery driver choose register map by MAX17042_DevName register. But it is return IC specific firmware version. So other maxim chip hard to use this drvier. This patch choose chip type from driver_data. Signed-off-by:
-
- 26 Mar, 2015 1 commit
-
-
Ben Dooks authored
Fix the passing of big endian data to routines that will be writing it to the bus in the wrong order. Signed-off-by:
Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by:
-
- 24 Mar, 2015 2 commits
-
-
Krzysztof Kozlowski authored
If power_supply_register() fails do not dereference returned ERR_PTR. The pointer was dereferenced to print name of battery which registration failed. Instead use the name from the power supply description passed to the power_supply_register() function. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Krzysztof Kozlowski authored
Do not call power_supply_powers() if power_supply_register() failed earlier. This fixes possible NULL pointer dereference by power_supply_powers() in such case. Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
- 20 Mar, 2015 3 commits
-
-
Fabian Frederick authored
of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by:
Fabian Frederick <fabf@skynet.be> [for vexpress] Acked-by:
Sudeep Holla <sudeep.holla@arm.com> Signed-off-by:
-
Richard Weinberger authored
Fixes: drivers/power/reset/rmobile-reset.c: In function ‘rmobile_reset_probe’: drivers/power/reset/rmobile-reset.c:61:2: error: implicit declaration of function ‘iounmap’ [-Werror=implicit-function-declaration] iounmap(sysc_base2); Signed-off-by:
Richard Weinberger <richard@nod.at> Acked-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Krzysztof Kozlowski authored
power_supply: 88pm860x_charger: Fix possible NULL pointer dereference and use of initialized variable Do not put reference to power supply in early exit paths of pm860x_done_handler() because: 1. it is not yet initialized, 2. it is NULL. This fixes possible NULL pointer dereference and following build warning: drivers/power/88pm860x_charger.c: In function ‘pm860x_done_handler’: drivers/power/88pm860x_charger.c:516:18: warning: ‘psy’ may be used uninitialized in this function [-Wmaybe-uninitialized] Additionally this puts the power supply reference before unlocking mutex. This actually is not needed (there is no race here) but has logical sense and makes the exit paths cleaner. Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
-
- 13 Mar, 2015 22 commits
-
-
Krzysztof Kozlowski authored
Use power_supply_put() to decrement the power supply's device reference counter. Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by:
Robert Jarzmik <robert.jarzmik@free.fr> Acked-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
-
Krzysztof Kozlowski authored
Use power_supply_put() to decrement the power supply's device reference counter. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Acked-by:
Lee Jones <lee.jones@linaro.org> Reviewed-by:
-
Krzysztof Kozlowski authored
Use power_supply_put() to decrement the power supply's device reference counter (increased by power_supply_get_by_name() or power_supply_get_by_phandle()). Signed-off-by:
-
Krzysztof Kozlowski authored
Use power_supply_put() to decrement the power supply's device reference counter. Signed-off-by:
-
Krzysztof Kozlowski authored
Replace direct usage of put_device() with new API: power_supply_put(). Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Krzysztof Kozlowski authored
Replace direct usage of put_device() with new API: power_supply_put(). Signed-off-by:
-
Krzysztof Kozlowski authored
Use power_supply_put() to decrement the power supply's device reference counter. Signed-off-by:
-
Krzysztof Kozlowski authored
Increment the power_supply.use_cnt usage counter on: - power_supply_get_by_phandle() - power_supply_get_by_name() and decrement it on power_supply_put() call. This helps tracking of valid usage of power supply instance by consumers. The usage counter itself also allows safe calling of power_supply_get_property-like functions even when driver unregisters this power supply. Signed-off-by:
-
Krzysztof Kozlowski authored
The power_supply_get_by_phandle() and power_supply_get_by_name() use function class_find_device() for obtaining the reference to power supply. Each use of class_find_device() increases the power supply's device reference counter. However the reference counter was not decreased by users of this API. Thus final device_unregister() call from power_supply_unregister() could not release the device and clean up its resources. This lead to memory leak if at least once power_supply_get_by_*() was called between registering and unregistering the power supply. Add and document new API power_supply_put() for decrementing the reference counter. Signed-off-by:
-
Krzysztof Kozlowski authored
Change the ownership of power_supply structure from each driver implementing the class to the power supply core. The patch changes power_supply_register() function thus all drivers implementing power supply class are adjusted. Each driver provides the implementation of power supply. However it should not be the owner of power supply class instance because it is exposed by core to other subsystems with power_supply_get_by_name(). These other subsystems have no knowledge when the driver will unregister the power supply. This leads to several issues when driver is unbound - mostly because user of power supply accesses freed memory. Instead let the core own the instance of struct 'power_supply'. Other users of this power supply will still access valid memory because it will be freed when device reference count reaches 0. Currently this means "it will leak" but power_supply_put() call in next patches will solve it. This solves invalid memory references in following race condition scenario: Thread 1: charger manager Thread 2: power supply driver, used by charger manager THREAD 1 (charger manager) THREAD 2 (power supply driver) ========================== ============================== psy = power_supply_get_by_name() Driver unbind, .remove power_supply_unregister() Device fully removed psy->get_property() The 'get_property' call is executed in invalid context because the driver was unbound and struct 'power_supply' memory was freed. This could be observed easily with charger manager driver (here compiled with max17040 fuel gauge): $ cat /sys/devices/virtual/power_supply/cm-battery/capacity & $ echo "1-0036" > /sys/bus/i2c/drivers/max17040/unbind [ 55.725123] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 55.732584] pgd = d98d4000 [ 55.734060] [00000000] *pgd=5afa2831, *pte=00000000, *ppte=00000000 [ 55.740318] Internal error: Oops: 80000007 [#1] PREEMPT SMP ARM [ 55.746210] Modules linked in: [ 55.749259] CPU: 1 PID: 2936 Comm: cat Tainted: G W 3.19.0-rc1-next-20141226-00048-gf79f475f3c44-dirty #1496 [ 55.760190] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 55.766270] task: d9b76f00 ti: daf54000 task.ti: daf54000 [ 55.771647] PC is at 0x0 [ 55.774182] LR is at charger_get_property+0x2f4/0x36c [ 55.779201] pc : [<00000000>] lr : [<c034b0b4>] psr: 60000013 [ 55.779201] sp : daf55e90 ip : 00000003 fp : 00000000 [ 55.790657] r10: 00000000 r9 : c06e2878 r8 : d9b26c68 [ 55.795865] r7 : dad81610 r6 : daec7410 r5 : daf55ebc r4 : 00000000 [ 55.802367] r3 : 00000000 r2 : daf55ebc r1 : 0000002a r0 : d9b26c68 [ 55.808879] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 55.815994] Control: 10c5387d Table: 598d406a DAC: 00000015 [ 55.821723] Process cat (pid: 2936, stack limit = 0xdaf54210) [ 55.827451] Stack: (0xdaf55e90 to 0xdaf56000) [ 55.831795] 5e80: 60000013 c01459c4 0000002a c06f8ef8 [ 55.839956] 5ea0: db651000 c06f8ef8 daebac00 c04cb668 daebac08 c0346864 00000000 c01459c4 [ 55.848115] 5ec0: d99eaa80 c06f8ef8 00000fff 00001000 db651000 c027f25c c027f240 d99eaa80 [ 55.856274] 5ee0: d9a06c00 c0146218 daf55f18 00001000 d99eaa80 db4c18c0 00000001 00000001 [ 55.864468] 5f00: daf55f80 c0144c78 c0144c54 c0107f90 00015000 d99eaab0 00000000 00000000 [ 55.872603] 5f20: 000051c7 00000000 db4c18c0 c04a9370 00015000 00001000 daf55f80 00001000 [ 55.880763] 5f40: daf54000 00015000 00000000 c00e53dc db4c18c0 c00e548c 0000000d 00008124 [ 55.888937] 5f60: 00000001 00000000 00000000 db4c18c0 db4c18c0 00001000 00015000 c00e5550 [ 55.897099] 5f80: 00000000 00000000 00001000 00001000 00015000 00000003 00000003 c000f364 [ 55.905239] 5fa0: 00000000 c000f1a0 00001000 00015000 00000003 00015000 00001000 0001333c [ 55.913399] 5fc0: 00001000 00015000 00000003 00000003 00000002 00000000 00000000 00000000 [ 55.921560] 5fe0: 7fffe000 be999850 0000a225 b6f3c19c 60000010 00000003 00000000 00000000 [ 55.929744] [<c034b0b4>] (charger_get_property) from [<c0346864>] (power_supply_show_property+0x48/0x20c) [ 55.939286] [<c0346864>] (power_supply_show_property) from [<c027f25c>] (dev_attr_show+0x1c/0x48) [ 55.948130] [<c027f25c>] (dev_attr_show) from [<c0146218>] (sysfs_kf_seq_show+0x84/0x104) [ 55.956298] [<c0146218>] (sysfs_kf_seq_show) from [<c0144c78>] (kernfs_seq_show+0x24/0x28) [ 55.964536] [<c0144c78>] (kernfs_seq_show) from [<c0107f90>] (seq_read+0x1b0/0x484) [ 55.972172] [<c0107f90>] (seq_read) from [<c00e53dc>] (__vfs_read+0x18/0x4c) [ 55.979188] [<c00e53dc>] (__vfs_read) from [<c00e548c>] (vfs_read+0x7c/0x100) [ 55.986304] [<c00e548c>] (vfs_read) from [<c00e5550>] (SyS_read+0x40/0x8c) [ 55.993164] [<c00e5550>] (SyS_read) from [<c000f1a0>] (ret_fast_syscall+0x0/0x48) [ 56.000626] Code: bad PC value [ 56.011652] ---[ end trace 7b64343fbdae8ef1 ]--- Signed-off-by:Marc Dietrich <marvin24@gmx.de> [for compal-laptop.c] Acked-by:
Darren Hart <dvhart@linux.intel.com> [for the mfd part] Acked-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Krzysztof Kozlowski authored
Replace direct calls to power supply function attributes with wrappers. Wrappers provide safe access in case of unregistering the power supply (e.g. by removing the driver). Replace: - get_property -> power_supply_get_property Signed-off-by:
Jonghwa Lee <jonghwa3.lee@samsung.com> Acked-by:
-
Krzysztof Kozlowski authored
Replace direct calls to power supply function attributes with wrappers. Wrappers provide safe access in case of unregistering the power supply (e.g. by removing the driver). Replace: - get_property -> power_supply_get_property Signed-off-by:
-
Krzysztof Kozlowski authored
Replace direct calls to power supply function attributes with wrappers. Wrappers provide safe access in case of unregistering the power supply (e.g. by removing the driver). Replace: - get_property -> power_supply_get_property Signed-off-by:
-
Krzysztof Kozlowski authored
Replace direct calls to power supply function attributes with wrappers. Wrappers provide safe access in case of unregistering the power supply (e.g. by removing the driver). Replace: - get_property -> power_supply_get_property Signed-off-by:
-
Krzysztof Kozlowski authored
Replace direct calls to power supply function attributes with wrappers. Wrappers provide safe access in case of unregistering the power supply (e.g. by removing the driver). Replace: - get_property -> power_supply_get_property Signed-off-by:
-
Krzysztof Kozlowski authored
Replace direct calls to power supply function attributes with wrappers. Wrappers provide safe access in case of unregistering the power supply (e.g. by removing the driver). Replace: - get_property -> power_supply_get_property - set_property -> power_supply_set_property Signed-off-by:
-
Krzysztof Kozlowski authored
Replace direct calls to power supply function attributes with wrappers. Wrappers provide safe access in case of unregistering the power supply (e.g. by removing the driver). Replace: - get_property -> power_supply_get_property - set_property -> power_supply_set_property - property_is_writeable -> power_supply_property_is_writeable Signed-off-by:
-
Krzysztof Kozlowski authored
Add simple wrappers for accessing power supply's function attributes: - get_property -> power_supply_get_property - set_property -> power_supply_set_property - property_is_writeable -> power_supply_property_is_writeable - external_power_changed -> power_supply_external_power_changed This API along with atomic usage counter adds a safe way of accessing a power supply from another driver. If power supply is unregistered after obtaining reference to it by some driver, then the API wrappers won't be executed in invalid (freed) context. Next patch changing the ownership of power supply class is still needed to fully fix race conditions in accessing freed power supply. Signed-off-by:
-
Krzysztof Kozlowski authored
Add new structure 'power_supply_config' for holding run-time initialization data like of_node, supplies and private driver data. The power_supply_register() function is changed so all power supply drivers need updating. When registering the power supply this new 'power_supply_config' should be used instead of directly initializing 'struct power_supply'. This allows changing the ownership of power_supply structure from driver to the power supply core in next patches. When a driver does not use of_node or supplies then it should use NULL as config. If driver uses of_node or supplies then it should allocate config on stack and initialize it with proper values. Signed-off-by:
-
Krzysztof Kozlowski authored
Allow drivers to store private data inside power_supply structure for later usage in power supply operations. Usage of driver private data is necessary to access driver's state container object from power supply calls (like get_property()) if struct 'power_supply' is a stored there as a pointer, for example: struct some_driver_info { struct i2c_client *client; struct power_supply *power_supply; ... } In such case one cannot use container_of() and must store pointer to state container as private data. Signed-off-by: -
Krzysztof Kozlowski authored
The return value of power_supply_register() call was not checked and even on error probe() function returned 0. If registering failed then during unbind the driver tried to unregister power supply which was not actually registered. This could lead to memory corruption because power_supply_unregister() unconditionally cleans up given power supply. Fix this by checking return status of power_supply_register() call. In case of failure, clean up sysfs entries and fail the probe. Signed-off-by:
-
Krzysztof Kozlowski authored
The commit c2be45f0 ("compal-laptop: Use devm_hwmon_device_register_with_groups") wanted to change the registering of hwmon device to resource-managed version. It mostly did it except the main thing - it forgot to use devm-like function so the hwmon device leaked after device removal or probe failure. Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Acked-by:
-
- 09 Mar, 2015 1 commit
-
-
Nicolas Saenz Julienne authored
The POWER_SUPPLY_PROP_STATUS case in gab_get_property() wasn't providing any value. Signed-off-by:
Nicolas Saenz Julienne <nicolassaenzj@gmail.com> Signed-off-by:
-
- 07 Mar, 2015 5 commits
-
-
Valentin Rothberg authored
All 5 IRQ handlers of the driver are requested as threaded interrupt handlers. However, only 1 handler can block. The remaining 4 handlers defer the actual handling to a workqueue. Hence, 4 of 5 IRQ handlers have a considerable overhead, since they are executed in a kernel thread to schedule another kernel thread (workqueue). This change splits up the 5 interrupt handlers into top halves (_th) and bottom halves (_bh) and resolves the aforementioned overhead by only requesting threaded interrupts (i.e., bottom halves) when necessary. Signed-off-by:
Valentin Rothberg <Valentin.Rothberg@lip6.fr> Signed-off-by:
-
Todd Brandt authored
New power_supply driver at driver/power which interfaces with the axp20x mfd driver as a cell. Provides battery info, monitors for changes, and generates alerts on temperature and capacity issues Signed-off-by:
Todd Brandt <todd.e.brandt@linux.intel.com> Acked-by:
Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by:
-
Todd Brandt authored
Name changes to the battery cell structure to a more generic cell type: fuel gauge. Signed-off-by:
-
Anda-Maria Nicolae authored
This patch adds bq24157s charger in the list of supported chargers. bq24157s is similar to bq24158, except for Bit6 from Special Charger Voltage/Enable Pin Status register, but this register is currently not used by bq2415x_charger. Signed-off-by:
Anda-Maria Nicolae <anda-maria.nicolae@intel.com> Signed-off-by:
-
Anda-Maria Nicolae authored
Fix coding style to comply with checkpatch.pl Signed-off-by:
-
- 02 Mar, 2015 1 commit
-
-
Valentin Rothberg authored
Since commit 1c6c6952 ("genirq: Reject bogus threaded irq requests") threaded IRQs without a primary handler need to be requested with IRQF_ONESHOT, otherwise the request may fail. Generated by: scripts/coccinelle/misc/irqf_oneshot.cocci Signed-off-by:
-
- 28 Feb, 2015 1 commit
-
-
Alexandre Belloni authored
Add support for bq27510 to the bq27x00 driver. Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by:
-
- 26 Feb, 2015 1 commit
-
-
NeilBrown authored
Using devm_power_supply_register allows the unregister to happen automatically on error or final put. Signed-off-by:
NeilBrown <neilb@suse.de> Signed-off-by:
-
