Check the number of supported vectors and fall back to MSI if
we return or error or 0 MSI-X vectors.

v2: only allocate one vector.  We can't currently use more than
one anyway.

v3: install the irq on vector 0.
Tested-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Shaoyun liu  <shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

There is a spelling mistake in the macros H1_A45_AUTHENICATED and
D1_A4_AUTHENICATED, fix these by adding the missing T.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The type definition for 'uint' clashes with the generic kernel
headers:

drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn21/display_mode_vba_21.c:43:22: error: redefinition of typedef 'uint' is a C11 feature [-Werror,-Wtypedef-redefinition]
include/linux/types.h:92:23: note: previous definition is here

Just remove this type and use plain 'unsigned int' consistently,
as it is already use almost everywhere in this file.

Fixes: b04641a3 ("drm/amd/display: Add Renoir DML")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

An earlier patch of mine disabled some #warning statements
that get in the way of build testing, but then another
instance was added around the same time.

Remove that as well.

Fixes: b5203d16 ("drm/amd/amdgpu: hide #warning for missing DC config")
Fixes: e1c14c43 ("drm/amdgpu: Enable DC on Renoir")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

When CONFIG_PERF_EVENTS is disabled, we cannot compile the pmu
portion of the amdgpu driver:

drivers/gpu/drm/amd/amdgpu/amdgpu_pmu.c:48:38: error: no member named 'hw' in 'struct perf_event'
        struct hw_perf_event *hwc = &event->hw;
                                     ~~~~~  ^
drivers/gpu/drm/amd/amdgpu/amdgpu_pmu.c:51:13: error: no member named 'attr' in 'struct perf_event'
        if (event->attr.type != event->pmu->type)
            ~~~~~  ^
...

The same bug was already fixed by commit d155bef0 ("amdgpu: make pmu
support optional") but broken again by what looks like an incorrectly
rebased patch.

Fixes: 64f55e62 ("drm/amdgpu: Add RAS EEPROM table.")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

In dcn*_clock_source_create when dcn20_clk_src_construct fails allocated
clk_src needs release.
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fixes gcc '-Wunused-but-set-variable' warning:

rivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c: In function
‘amdgpu_gfx_graphics_queue_acquire’:
drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c:234:16: warning:
variable ‘pipe’ set but not used [-Wunused-but-set-variable]

It is never used, so can be removed.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: yu kuai <yukuai3@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Even though 'smu8_smu' is declared, it is not used after below statement.

   smu8_smu = hwmgr->smu_backend;

So 'unused variable' could be safely removed
to stop warning message as below:

   drivers/gpu/drm/amd/amdgpu/../powerplay/smumgr/smu8_smumgr.c:180:22:
   warning: variable ‘smu8_smu’ set but not used
   [-Wunused-but-set-variable]

   struct smu8_smumgr *smu8_smu;
             ^
Signed-off-by: Austin Kim <austindh.kim@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

In acp_hw_init there are some allocations that needs to be released in
case of failure:

1- adev->acp.acp_genpd should be released if any allocation attemp for
adev->acp.acp_cell, adev->acp.acp_res or i2s_pdata fails.
2- all of those allocations should be released if
mfd_add_hotplug_devices or pm_genpd_add_device fail.
3- Release is needed in case of time out values expire.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

We reset the GPU as part of our hibernation sequence so we need
to make sure we don't mark vram as lost in that case.

Bug: https://bugs.freedesktop.org/show_bug.cgi?id=111879Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

We might used out of the msi resources in some cloud project
which have a lot gpu devices(including PF and VF), msix can
provide enough resources from system level view
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The code use hex define, so should the printing.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The KFD code will call this function later.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The HDP flush support code was missing in the nbio and nv files.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This is the same idea as the kfd device info probe and move all the
probe control together for easy maintenance.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Ajust the function sequences so that those function delcarations are not
needed any more.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Those header file includes are not needed.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add ip block setting for Arcturus SRIOV

1.PSP need to be initialized before IH.
2.SMU doesn't need to be initialized at kmd driver.
3.Arcturus doesn't support DCE hardware,it needs to skip
  register access to DCE.
Signed-off-by: Jack Zhang <Jack.Zhang1@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

UMDs need this for correct programming of harvested chips.
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

We are supposed to be atomic after all. We'll need this in a moment for
the next commit.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

kfree() checks this automatically.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Currently, every single piece of code in amdgpu that loops through
connectors does it incorrectly and doesn't use the proper list iteration
helpers, drm_connector_list_iter_begin() and
drm_connector_list_iter_end(). Yeesh.

So, do that.

Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Since we're going to be reprobing the entire topology state on resume
now using sideband transactions, we need to ensure that we actually have
short HPD irqs enabled before calling drm_dp_mst_topology_mgr_resume().
So, do that.

Changes since v4:
* Fix typo in comments

Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The patch c670707 drm/amd: Pass drm_device to kfd introduced this issue and
fix the following compiler error.

  CC [M]  drivers/gpu/drm/amd/amdgpu//../powerplay/smumgr/fiji_smumgr.o
drivers/gpu/drm/amd/amdgpu//amdgpu_amdkfd.c:746:6: error: conflicting types for ‘kgd2kfd_device_init’
 bool kgd2kfd_device_init(struct kfd_dev *kfd,
      ^
In file included from drivers/gpu/drm/amd/amdgpu//amdgpu_amdkfd.c:23:0:
drivers/gpu/drm/amd/amdgpu//amdgpu_amdkfd.h:253:6: note: previous declaration of ‘kgd2kfd_device_init’ was here
 bool kgd2kfd_device_init(struct kfd_dev *kfd,
      ^
scripts/Makefile.build:273: recipe for target 'drivers/gpu/drm/amd/amdgpu//amdgpu_amdkfd.o' failed
make[1]: *** [drivers/gpu/drm/amd/amdgpu//amdgpu_amdkfd.o] Error 1
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Acked-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

the member of is_apu in smu_context need to initlialize by default.

set default value is false (dGPU)

for patch:
	drm/amd/powerplay: bypass dpm_context null pointer check guard
	for some smu series
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This reverts commit 5813f97a.

Since SBIOS WCD9925N, NMI printing disappeared. Hence enable stutter
mode.
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Update get_dpm_uclk_limited to get more clock type full scale dpm frequency.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add the interface for setting sclk and uclk peak frequency.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

v1:
Add set_power_profile_mode() for none manual dpm level case setting power profile mode.

v2:
After input power profile update successfully need can update the smu profile mode.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

implement get_profiling_clk_mask and force_clk_levels for forcing dpm clk to limit value.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The workload type was got from the input of power profile mode.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

That's base function for forcing and unforcing dpm limit value.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The APU soft freq range set by different way from DGPU, thus need implement
the function respectively base on each common SMU part.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

For now APU has no smu_dpm_context structure for containing default/current related dpm tables,
thus will needn't initialize smu_dpm_context to aviod APU null pointer issue.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

enable/disable IH clock gating on soc15 projects.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

when multithreading access sysfs of amdgpu_pm_info at the sametime.
the swsmu driver cause smu firmware hang.

eg:
single thread access:
Message A + Param A ==> right
Message B + Param B ==> right
Message C + Param C ==> right
multithreading access:
Message A + Param B ==> error
Message B + Param A ==> error
Message C + Param C ==> right

the patch will add sensor lock(mutex) to avoid this error.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

v2:
change period from 10ms to 100ms (typo error)

too high frequence to update mertrics table will cause smu firmware
error,so change mertrics table update period from 1ms to 100ms
(navi10, 12, 14)
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Missing synchronization with VGPR restore leads to intermittent
VGPR trashing in the user shader.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Yong Zhao <Yong.Zhao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This was done on GFX9 previously, now do it for GFX10.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>