The poor cousins will also have registration routines, etc.
Signed-off-by: Arnaldo Carvalho de Melo <acme@conectiva.com.br>

Yeah, the poor cousins will use this as well :-)

The poor cousins also need this, LLC will be the first to use it.
Signed-off-by: Arnaldo Carvalho de Melo <acme@conectiva.com.br>

Renaming it to sk_stream_moderate_sndbuf, further patches will move
all the tcp memory pressure handling support into net/core/stream.c
to make them usable by the poor cousins, starting with LLC.
Signed-off-by: Arnaldo Carvalho de Melo <acme@conectiva.com.br>

Will be used by the poor cousins
Signed-of-by: Arnaldo Carvalho de Melo <acme@conectiva.com.br>

Signed-off-by: Arnaldo Carvalho de Melo <acme@conectiva.com.br>

Will be used by the poor cousins
Signed-off-by: Arnaldo Carvalho de Melo <acme@conectiva.com.br>

Renaming it to sk_stream_wait_memory
Signed-off-by: Arnaldo Carvalho de Melo <acme@conectiva.com.br>

Will be used by the poor cousins.
Signed-off-by: Arnaldo Carvalho de Melo <acme@conectiva.com.br>

This will be used by the poor cousins, look, for instance, at
x25_wait_for_connection_establishment :-)
Signed-off-by: Arnaldo Carvalho de Melo <acme@conectiva.com.br>

Signed-off-by: Arnaldo Carvalho de Melo <acme@conectiva.com.br>

This one also removes the duplicate can_coalesce in tcp.c and makes it
use skb_can_coalesce.
Signed-off-by: Arnaldo Carvalho de Melo <acme@conectiva.com.br>

Signed-off-by: Arnaldo Carvalho de Melo <acme@conectiva.com.br>

Signed-off-by: Arnaldo Carvalho de Melo <acme@conectiva.com.br>

Move tcp sk_wmem_queued related functions to net/core/stream.c, will be
used by other SOCK_STREAM protocols, starting with LLC.

Also move the tcp_charge_skb to sock.h, for the same reasons.
Signed-off-by: Arnaldo Carvalho de Melo <acme@conectiva.com.br>

Will be used by the poor cousins, starting with LLC.
Signed-off-by: Arnaldo Carvalho de Melo <acme@conectiva.com.br>

Later patches will make other protocols use sk_wait_data and further generalisations
of tcp code will use sk_wait_event.

This is again to abstract away more stuff from poor network family writers, like
the SOCK_ASYNC_WAITDATA, etc.
Signed-off-by: Arnaldo Carvalho de Melo <acme@conectiva.com.br>

It was already generic, so reflect this in the naming.

Later patches will make it be used in other network families.

This makes the best practices already in place in bluetooth
and tcp/ip available for all protocols, i.e. references must
be managed when associating timers with struct sock instances,
also makes the code a bit more clean.
Signed-off-by: Arnaldo Carvalho de Melo <acme@conectiva.com.br>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Patch from Ben Dooks

Fix missing select of SERIAL_CORE_CONSOLE when selecting the
S3C2410 serial console support with no other serial console
selected

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Patch from Marc Singer

Small change to support revision B Card Engines.

Patch from Marc Singer

This patch corrects a bug in the register access macros for 16 and 8
bit accesses.  It also updates the default configuration files for the
2.6.7 kernel.

Patch from Ben Dooks

Fix for multiple definition of the same item in the GPIO and IRQ
register includes

into evo.osdl.org:/home/torvalds/v2.6/linux

into dwmw2.baythorne.internal:/inst/bk/sbc8260-2.6

 - Switch to using u-boot bdinfo.
 - Set up CS11 for RTC if the bootloader didn't bother.
 - Set BOOTROM_RESTART_ADDR so machine_restart() actually works.
 - For non-uboot boot, note bus clock is 66MHz on 8265 model.

into dwmw2.baythorne.internal:/inst/bk/sbc8260-2.6

Stop downgrade_write() from under-adjusting the rwsem counter in optimised
rw-semaphores.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

into evo.osdl.org:/home/torvalds/v2.6/linux

Signed off by: Jesse Brandeburg

From: Carl-Daniel Hailfinger <c-d.hailfinger.kernel.2004@gmx.net>

Handle going-away devices.

This patch fixes an incorrect MCA check as well as a leak on probe
failure in at1700.

This patch frees the netdev on failure in mc32_probe in 3c527.

"Gee it works better if you turn the chip on before programming it"

The ioctl to ethtool change broke that little detail...


I made the changes, Jeff agreed in principle, Red Hat owns them and I know
no reason they can't be contributed under the GPL v2 or later.

Requires: ethtool change

Several ethernet drivers have been broken by the ethtool support because
the ioctl code used to power the interface up and down as needed. Rather
than add this to each driver call Jeff Garzik suggested we add hooks
for before/after ethtool processing.

This patch implements them which makes fixing the PM stuff easier,
as the epic100 patch to follow will show. It also cleans up the
via-velocity driver pm/ethtool logic a great deal. As per Jeff's
request the before handler is allowed to fail the operation.

--

The contribution herein included is a creation of Red Hat Inc. It is hereby
submitted under the license of the existing files and as a derivative work
thereof. I know of no reason for not having the right to submit the
work herein included.

(Bluff your way in legalese ;))

into hostme.bitkeeper.com:/repos/l/linux-mtd/sbc8260-2.6

Adrian Bunk noticed that the tda1004x DVB frontend driver was broken and
sent a small patch that at least made the driver work again.

There was a discussion afterwards about the kernel syscall interface,
but at the end, the tda1004x DVB frontend driver is still non-functional.

This re-applies the temporary band-aid.