Broadcom devices with a single 802.11 core can work on two band
concurrently using VSDB feature, ie. Virtual Simultaneous Dual-Band.
For devices that are fitted with two 802.11 cores and RF paths the
driver should support a firmware feature called RSDB, which stands
for Real Simultaneous Dual-Band. RSDB works almost autonomously in
firmware except for AP config. When the device supports RSDB then
the interface should not be brought down when configuring it,
otherwise the link (if configured) on the other interface will be
lost.
Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
[kvalo@codeaurora.org: changed the commit log based on discussion]
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Currently runtime pm is enabled for USB, but it is not properly
supported by driver. This patch disables the runtime PM support
completely for USB, as it currently can result in problems on
some systems.
Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

The variable irq_requested is unneeded as the functionality
it is providing, is also provided by the variable irq_allocated.
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

The brcmf_netdev_start_xmit checks if the ndev is still valid by
checking if it still exists in database. This check is not needed
and therefor removed.
Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

brcmf_ifname is a debug function to return a name related to an ifp,
but is using a rather complex implementation. It was also used
wrongly from bcdc as it did not use the bsscfgidx as it was supposed
to, but bssidx. This patch fixes that bug and simplifies
brcmf_ifname.
Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

mac80211_hwsim was not placed alphabetically correctly in menuconfig, fix that.
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Change menuconfig to config to keep the Kconfig entries unified. Part of
reorganising wireless drivers directory and Kconfig.
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Rename WL_TI to WLAN_VENDOR_TI to match with other vendor configs and make sure
that it's enabled by default in new configs. Convert menuconfigs to regular
configs to unify the wireless drivers menuconfig. Part of reorganising wireless
drivers directory and Kconfig.

Also remove WLCORE dependency to WL_TI. It should not be needed as WLCORE is
already under if  WLAN_VENDOR_TI.
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Part of reorganising wireless drivers directory and Kconfig.
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Part of reorganising wireless drivers directory and Kconfig.
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Part of reorganising wireless drivers directory and Kconfig.
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Add new a Kconfig file and a vendor config for realtek. Also update MAINTAINERS
which we missed to do when earlier moving rtlwifi.
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Part of reorganising wireless drivers directory and Kconfig.
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Part of reorganising wireless drivers directory and Kconfig.
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Part of reorganising wireless drivers directory and Kconfig.
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Part of reorganising wireless drivers directory and Kconfig.
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Part of reorganising wireless drivers directory and Kconfig.
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Part of reorganising wireless drivers directory and Kconfig.
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Part of reorganising wireless drivers directory and Kconfig.
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Part of reorganising wireless drivers directory and Kconfig.
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Part of reorganising wireless drivers directory and Kconfig.
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Part of reorganising wireless drivers directory and Kconfig.
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Part of reorganising wireless drivers directory and Kconfig.
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Part of reorganising wireless drivers directory and Kconfig.
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Part of reorganising wireless drivers directory and Kconfig.
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Part of reorganising wireless drivers directory and Kconfig.
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Part of reorganising wireless drivers directory and Kconfig. Note that I had to
edit Makefiles from subdirectories to use the new location.
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Part of reorganising wireless drivers directory and Kconfig.
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Part of reorganising wireless drivers directory and Kconfig.
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Part of reorganising wireless drivers directory and Kconfig.
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Part of reorganising wireless drivers directory and Kconfig.
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Part of reorganising wireless drivers directory and Kconfig.
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Merge final patch-bomb from Andrew Morton:
 "Various leftovers, mainly Christoph's pci_dma_supported() removals"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  pci: remove pci_dma_supported
  usbnet: remove ifdefed out call to dma_supported
  kaweth: remove ifdefed out call to dma_supported
  sfc: don't call dma_supported
  nouveau: don't call pci_dma_supported
  netup_unidvb: use pci_set_dma_mask insted of pci_dma_supported
  cx23885: use pci_set_dma_mask insted of pci_dma_supported
  cx25821: use pci_set_dma_mask insted of pci_dma_supported
  cx88: use pci_set_dma_mask insted of pci_dma_supported
  saa7134: use pci_set_dma_mask insted of pci_dma_supported
  saa7164: use pci_set_dma_mask insted of pci_dma_supported
  tw68-core: use pci_set_dma_mask insted of pci_dma_supported
  pcnet32: use pci_set_dma_mask insted of pci_dma_supported
  lib/string.c: add ULL suffix to the constant definition
  hugetlb: trivial comment fix
  selftests/mlock2: add ULL suffix to 64-bit constants
  selftests/mlock2: add missing #define _GNU_SOURCE

Pull misc kbuild updates from Michal Marek:
 "This is the non-critical part of kbuild:

   - several coccinelle updates
   - make deb-pkg creates an armhf package if CONFIG_VFP=y
   - make tags understands some more powerpc macros"

* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  coccinelle: Improve checking for missing NULL terminators
  coccinelle: ifnullfree: handle various destroy functions
  coccinelle: ifnullfree: various cleanups
  cocinelle: iterators: semantic patch to delete unneeded of_node_put
  deb-pkg: Add automatic support for armhf architecture
  scripts/coccinelle: fix typos
  coccinelle: misc: remove "complex return code" warnings
  Coccinelle: fix incorrect -include option transformation
  coccinelle: tests: improve odd_ptr_err.cocci
  coccinelle: misc: move constants to the right
  scripts/tags.sh: Teach tags about some powerpc macros

Pull kconfig updates from Michal Marek:

 - 'make xconfig' ported to Qt5, dropping support for Qt3

 - merge_config.sh supports a single-input-file mode and also respects
   $KCONFIG_CONFIG

 - Fix for incorrect display of >= and > in dependency expressions

* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: (44 commits)
  Add current selection check.
  Use pkg-config to find Qt 4 and 5 instead of direct qmake
  kconfig: Fix copy&paste error
  kconfig/merge_config.sh: Accept a single file
  kconfig/merge_config.sh: Support KCONFIG_CONFIG
  Update the buildsystem for KConfig finding Qt
  Port xconfig to Qt5 - Update copyright.
  Port xconfig to Qt5 - Fix goParent issue.
  Port xconfig to Qt5 - on Back clicked, deselect old item.
  Port xconfig to Qt5 - Add(back) one click checkbox toggle.
  Port xconfig to Qt5 - Add(back) lineedit editing.
  Port xconfig to Qt5 - Remove some commented code.
  Port xconfig to Qt5 - Source format.
  Port xconfig to Qt5 - Add horizontal scrollbar, and scroll per pixel.
  Port xconfig to Qt5 - Change ConfigItem constructor parent type.
  Port xconfig to Qt5 - Disable ConfigList soring
  Port xconfig to Qt5 - Remove ConfigList::updateMenuList template.
  Port xconfig to Qt5 - Add ConfigList::mode to initializer list.
  Port xconfig to Qt5 - Add ConfigItem::nextItem to initializer list.
  Port xconfig to Qt5 - Tree widget set column titles.
  ...

Pull kbuild update from Michal Marek:
 "The kbuild branch for v4.4-rc1 only has one commit: A new make
  kselftest-clean target cleans tools/testing/selftests"

* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kselftest: add kselftest-clean rule

Merge tag 'linux-kselftest-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest updates from Shuah Khan:
 "This 12 patch update for 4.4-rc1 consists of a new pstore test and
  fixes to existing tests"

* tag 'linux-kselftest-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests: breakpoint: Actually build it
  selftests: vm: Try harder to allocate huge pages
  selftests: Make scripts executable
  selftests: kprobe: Choose an always-defined function to probe
  selftests: memfd: Stop unnecessary rebuilds
  selftests: Add missing #include directives
  selftests/seccomp: Be more precise with syscall arguments.
  selftests/seccomp: build and pass on arm64
  selftests: memfd_test: Revised STACK_SIZE to make it 16-byte aligned
  selftests/pstore: add pstore test scripts going with reboot
  selftests/pstore: add pstore test script for pre-reboot
  selftests: add .gitignore for efivarfs

Pull drm fixes from Dave Airlie:
 "Two build fixes, one for VC4, one for nouveau where the ARM only code
  is doing something a bit strange.  While people are discussing that,
  just workaround it and fix the build for now.  The code in question
  will never get used on anything non-ARM anyways.

  Also one fix for AST that SuSE had been hiding in their kernel, that
  allows all fbdev apps to work on that driver"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/nouveau: fix build failures on all non ARM.
  drm/ast: Initialized data needed to map fbdev memory
  drm/vc4: Add dependency on HAVE_DMA_ATTRS, and select DRM_GEM_CMA_HELPER

gk20a is an ARM only GPU, so we can just do the correct thing on
ARM but fail on other architectures. The other option was to use
SWIOTLB as the define, which means phys_to_page exists, but
this seems clearer.
Signed-off-by: Dave Airlie <airlied@redhat.com>