- 17 Dec, 2019 39 commits
-
-
Florian Fainelli authored
Commit 77373d49 ("net: dsa: Move the phylink driver calls into port.c") moved and exported a bunch of symbols, but they are not used outside of net/dsa/port.c at the moment, so no reason to export them. Reported-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
Vivien Didelot <vivien.didelot@gmail.com> Acked-by:
Vladimir Oltean <olteanv@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jon Maloy authored
In the commit referred to below we eliminated sending of the 'gap' indicator in regular ACK messages, reserving this to explicit NACK ditto. Unfortunately we missed to also eliminate building of the 'gap block' area in ACK messages. This area is meant to report gaps in the received packet sequence following the initial gap, so that lost packets can be retransmitted earlier and received out-of-sequence packets can be released earlier. However, the interpretation of those blocks is dependent on a complete and correct sequence of gaps and acks. Hence, when the initial gap indicator is missing a single gap block will be interpreted as an acknowledgment of all preceding packets. This may lead to packets being released prematurely from the sender's transmit queue, with easily predicatble consequences. We now fix this by not building any gap block area if there is no initial gap to report. Fixes: commit 02288248 ("tipc: eliminate gap indicator from ACK messages") Signed-off-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
-
David S. Miller authored
Ajay Gupta says: ==================== net: stmmac: dwc-qos: ACPI device support Version 3 of patches have fixes for comments from Jakub Kicinski. These two changes are needed to enable ACPI based devices to use stmmac driver. First patch is to use generic device api (device_*) instead of device tree based api (of_*). Second patch avoids clock and reset accesses for Tegra ACPI based devices. ACPI interface will be used to access clock and reset for Tegra ACPI devices in later patches. ==================== Signed-off-by: -
Ajay Gupta authored
There are no clocks, resets or gpios referenced by Tegra ACPI device so don't access clocks, resets or gpios interface with ACPI device. Clocks, resets and GPIOs for ACPI devices will be handled via ACPI interface. Signed-off-by:
Ajay Gupta <ajayg@nvidia.com> Signed-off-by:
-
Ajay Gupta authored
Use generic device api so that driver can work both with DT or ACPI based devices. Signed-off-by:
-
David S. Miller authored
Biao Huang says: ==================== net-next: stmmac: dwmac-mediatek: add more support for RMII changes in v2: PATCH 1/2 net-next: stmmac: mediatek: add more support for RMII As Andrew's comments, add the "rmii_internal" clock to the list of clocks. PATCH 2/2 net-next: dt-binding: dwmac-mediatek: add more description for RMII document the "rmii_internal" clock in dt-bindings rewrite the sample dts in dt-bindings. v1: This series is for support RMII when MT2712 SoC provides the reference clock. ==================== Signed-off-by: -
Biao Huang authored
MT2712 SoC can provide RMII reference clock, so add corresponding description in dt-binding. Signed-off-by:
Biao Huang <biao.huang@mediatek.com> Signed-off-by:
-
Biao Huang authored
MT2712 SoC can provide the rmii reference clock, and the clock will output from TXC pin only, which means ref_clk pin of external PHY should connect to TXC pin in this case. Add corresponding clock and timing settings. Signed-off-by:
-
David S. Miller authored
Russell King says: ==================== improve clause 45 support in phylink These three patches improve the clause 45 support in phylink, fixing some corner cases that have been noticed with the addition of SFP+ NBASE-T modules, but are actually a little more wisespread than I initially realised. The first issue was spotted with a NBASE-T PHY on a SFP+ module plugged into a mvneta platform. When these PHYs are not operating in USXGMII mode, but are in a single-lane Serdes mode, they will switch between one of several different PHY interface modes. If we call the MAC validate() function with the current PHY interface mode, we will restrict the supported and advertising masks to the link modes that the current PHY interface mode supports. For example, if we determine that we want to start the PHY with an interface mode of 2500BASE-X, then this setup will restrict the advertisement and supported masks to 2.5G speed link modes. What we actually want for these PHYs is to allow them to support any link modes that the PHY supports _and_ the MAC is also capable of supporting. Without knowing the details of the PHY interface modes that may be used, we can do this by using PHY_INTERFACE_MODE_NA to validate and restrict the link modes to any that the MAC supports. mvpp2 with the 88X3310 PHY avoids this problem, because the validate() implementation allows all MAC supported speeds not only for PHY_INTERFACE_MODE_NA, but also for XAUI and 10GKR modes. The first patch addresses this; current MAC drivers should continue to work as-is, but there will be a follow-on patch to fixup at least mvpp2. The second issue addresses a very similar problem that occurs when trying to use ethtool to alter the advertisement mask - we call the MAC validate() function with the current interface mode, the current support and requested advertisement masks. This immediately restricts the advertisement in the same way as the above. This patch series addresses both issues, although the patches are not in the above order. v2: fix patch 3 missing 1G link modes for SGMII and RGMII interface modes. ==================== Signed-off-by: -
Russell King authored
Fix up the mvpp2 validate implementation to adopt the same behaviour as mvneta: - only allow the link modes that the specified PHY interface mode supports with the exception of 1000base-X and 2500base-X. - use the basex helper to deal with SFP modules that can be switched between 1000base-X vs 2500base-X. This gives consistent behaviour between mvneta and mvpp2. This commit depends on "net: phylink: extend clause 45 PHY validation workaround" so is not marked for backporting to stable kernels. Signed-off-by:
Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by:
-
Russell King authored
Commit e45d1f52 ("net: phylink: support Clause 45 PHYs on SFP+ modules") added a workaround to support clause 45 PHYs which dynamically switch their interface mode on SFP+ modules. This was implemented by validating the PHYs supported/advertising using PHY_INTERFACE_MODE_NA, rather than the specific interface mode that we attached the PHY with. However, we already have a situation where phylink is used to connect a Marvell 88X3310 PHY which also behaves in exactly the same way, but which seemingly doesn't need this. The reason seems to be that the mvpp2 driver sets a whole bunch of link modes for PHY_INTERFACE_MODE_10GKR down to 10Mb/s, despite 10GBASE-R not actually supporting anything but 10Gb/s speeds. When testing with drivers that (correctly) take the mvneta approach, where the validate() method only returns what can be supported / advertised for the specified link mode, we find that Clause 45 PHYs do not behave as we expect: their advertisement is restricted to what the current link will support, rather than what the PHY supports through its dynamic switching. Extend this workaround to all such cases; if we have a Clause 45 PHY attaching via any means, except in USXGMII, XAUI and RXAUI which are all unable to support this dynamic switching or have other solutions to it, then we need to validate using PHY_INTERFACE_MODE_NA. This should allow mvpp2 to switch to a more conformant validate() implementation. Signed-off-by:
-
Russell King authored
While testing ethtool with the Methode DM7052 module, it was noticed that attempting to set the advertising mask results in the mask being truncated to the support offered by the currently chosen PHY interface mode. When a PHY dynamically changes the PHY interface mode, limiting the advertising mask in this way is not correct - if the PHY happened to negotiate 10GBASE-T, and selected 10GBASE-R as the host interface, we don't want to restrict the advertisement to just 10GBASE-* modes. Rework setting the advertisement to take account of this; do not pass the requested advertisement through phylink_validate(), but rely on the advertisement restriction (supported mask) set when the PHY was initially setup. Signed-off-by:
-
David S. Miller authored
Jason A. Donenfeld says: ==================== WireGuard CI and housekeeping This is a collection of commits gathered during the last 1.5 weeks since merging WireGuard. If you'd prefer, I can send tree pull requests instead, but I figure it might be best for now to just send things as full patch sets to netdev. The first part of this adds in the CI test harness that we've been using for quite some time with success. You can type `make` and get the selftests running in a fresh VM immediately. This has been an instrumental tool in developing WireGuard, and I think it'd benefit most from being in-tree alongside the selftests that are already there. Once this lands, I plan to get build.wireguard.com building wireguard- linux.git and net-next.git on every single commit pushed, and do so on a bunch of different architectures. As this migrates into Linus' tree eventually and then into net.git, I'll get net.git building there too on every commit. Future work with this involves generalizing it to include more networking subsystem tests beyond just WireGuard, but one step at a time. In the process of porting this to the tree, the builder uncovered a mistake in the config menu file, which the second commit fixes. The last three commits are small housekeeping things, fixing spelling mistakes, replacing call_rcu with kfree_rcu, and removing an unused include. ==================== Signed-off-by: -
Wei Yongjun authored
The callback function of call_rcu() just calls a kfree(), so we can use kfree_rcu() instead of call_rcu() + callback function. Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
-
YueHaibing authored
Remove <linux/version.h> from the includes for main.c, which is unused. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> [Jason: reworded commit message] Signed-off-by:
-
Josh Soref authored
This fixes two spelling errors in source code comments. Signed-off-by:
Josh Soref <jsoref@gmail.com> [Jason: rewrote commit message] Signed-off-by:
-
Jason A. Donenfeld authored
This fixes the crypto selection submenu depenencies. Otherwise, we'd wind up issuing warnings in which certain dependencies we also select couldn't be satisfied. This condition was triggered by the addition of the test suite autobuilder in the previous commit. Signed-off-by:
-
Jason A. Donenfeld authored
WireGuard has been using this on build.wireguard.com for the last several years with considerable success. It allows for very quick and iterative development cycles, and supports several platforms. To run the test suite on your current platform in QEMU: $ make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it with KASAN and such turned on: $ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it emulated for another platform in QEMU: $ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc) At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k, mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64. The system supports incremental rebuilding, so it should be very fast to change a single file and then test it out and have immediate feedback. This requires for the right toolchain and qemu to be installed prior. I've had success with those from musl.cc. This is tailored for WireGuard at the moment, though later projects might generalize it for other network testing. Signed-off-by:
-
Aditya Pakki authored
In caif_xmit, there is a crash if the ptr dev is NULL. However, by returning the error to the callers, the error can be handled. The patch fixes this issue. Signed-off-by:
Aditya Pakki <pakki001@umn.edu> Signed-off-by:
-
Aditya Pakki authored
In fore200e_send and fore200e_close, the pointers from the arguments are dereferenced in the variable declaration block and then checked for NULL. The patch fixes these issues by avoiding NULL pointer dereferences. Signed-off-by:
-
David S. Miller authored
Ido Schimmel says: ==================== Simplify IPv4 route offload API Motivation ========== The aim of this patch set is to simplify the IPv4 route offload API by making the stack a bit smarter about the notifications it is generating. This allows driver authors to focus on programming the underlying device instead of having to duplicate the IPv4 route insertion logic in their driver, which is error-prone. This is the first patch set out of a series of four. Subsequent patch sets will simplify the IPv6 API, add offload/trap indication to routes and add tests for all the code paths (including error paths). Available here [1]. Details ======= Today, whenever an IPv4 route is added or deleted a notification is sent in the FIB notification chain and it is up to offload drivers to decide if the route should be programmed to the hardware or not. This is not an easy task as in hardware routes are keyed by {prefix, prefix length, table id}, whereas the kernel can store multiple such routes that only differ in metric / TOS / nexthop info. This series makes sure that only routes that are actually used in the data path are notified to offload drivers. This greatly simplifies the work these drivers need to do, as they are now only concerned with programming the hardware and do not need to replicate the IPv4 route insertion logic and store multiple identical routes. The route that is notified is the first FIB alias in the FIB node with the given {prefix, prefix length, table ID}. In case the route is deleted and there is another route with the same key, a replace notification is emitted. Otherwise, a delete notification is emitted. The above means that in the case of multiple routes with the same key, but different TOS, only the route with the highest TOS is notified. While the kernel can route a packet based on its TOS, this is not supported by any hardware devices I am familiar with. Moreover, this is not supported by IPv6 nor by BIRD/FRR from what I could see. Offload drivers should therefore use the presence of a non-zero TOS as an indication to trap packets matching the route and let the kernel route them instead. mlxsw has been doing it for the past two years. Testing ======= To ensure there is no degradation in route insertion rates, I averaged the insertion rate of 512k routes (/24 and /32) over 50 runs. Did not observe any degradation. Functional tests are available here [1]. They rely on route trap indication, which is only added in the last patch set. In addition, I have been running syzkaller for the past week with all four patch sets and debug options enabled. Did not observe any problems. Patch set overview ================== Patches #1-#8 gradually introduce the new FIB notifications Patch #9 converts mlxsw to use the new notifications Patch #10 converts the remaining listeners and removes the old notifications v2: * Extend fib_find_alias() with another argument instead of introducing a new function (David Ahern) RFC: https://patchwork.ozlabs.org/cover/1170530/ [1] https://github.com/idosch/linux/tree/fib-notifier ==================== Signed-off-by: -
Ido Schimmel authored
Unlike mlxsw, the other listeners to the FIB notification chain do not require any special modifications as they never considered multiple identical routes. This patch removes the old route notifications and converts all the listeners to use the new replace / delete notifications. Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Reviewed-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Ido Schimmel authored
With the new notifications mlxsw does not need to handle identical routes itself, as this is taken care of by the core IPv4 code. Instead, mlxsw only needs to take care of inserting and removing routes from the device. Convert mlxsw to use the new IPv4 route notifications and simplify the code. Signed-off-by:
-
Ido Schimmel authored
When a new listener is registered to the FIB notification chain it receives a dump of all the available routes in the system. Instead, make sure to only replay the IPv4 routes that are actually used in the data path and are of any interest to the new listener. Signed-off-by:
-
Ido Schimmel authored
In a similar fashion to previous patch, when a route is deleted as part of table flushing, promote the next route in the list, if exists. Otherwise, simply emit a delete notification. Signed-off-by:
-
Ido Schimmel authored
When a route is deleted we potentially need to promote the next route in the FIB alias list (e.g., with an higher metric). In case we find such a route, a replace notification is emitted. Otherwise, a delete notification for the deleted route. v2: * Convert to use fib_find_alias() instead of fib_find_first_alias() Signed-off-by:
-
Ido Schimmel authored
When a route is added, it should only be notified in case it is the first route in the FIB alias list with the given {prefix, prefix length, table ID}. Otherwise, it is not used in the data path and should not be considered by switch drivers. v2: * Convert to use fib_find_alias() instead of fib_find_first_alias() Signed-off-by: -
Ido Schimmel authored
When replacing a route, its replacement should only be notified in case the replaced route is of any interest to listeners. In other words, if the replaced route is currently used in the data path, which means it is the first route in the FIB alias list with the given {prefix, prefix length, table ID}. v2: * Convert to use fib_find_alias() instead of fib_find_first_alias() Signed-off-by: -
Ido Schimmel authored
Extend the function with another argument, 'find_first'. When set, the function returns the first FIB alias with the matching {prefix, prefix length, table ID}. The TOS and priority parameters are ignored. Current callers are converted to pass 'false' in order to maintain existing behavior. This will be used by subsequent patches in the series. v2: * New patch Signed-off-by: -
Ido Schimmel authored
Currently, a new route is notified in the FIB notification chain before it is inserted to the FIB alias list. Subsequent patches will use the placement of the new route in the ordered FIB alias list in order to determine if the route should be notified or not. As a preparatory step, change the order so that the route is first inserted into the FIB alias list and only then notified. Signed-off-by:
-
Ido Schimmel authored
Subsequent patches are going to simplify the IPv4 route offload API, which will only use two events - replace and delete. Introduce a temporary version of these two events in order to make the conversion easier to review. Signed-off-by:
-
David S. Miller authored
Huazhong Tan says: ==================== net: hns3: some optimizaions related to work task This series refactors the work task of the HNS3 ethernet driver. [patch 1/5] uses delayed workqueue to replace the timer for hclgevf_service task, make the code simpler. [patch 2/5] & [patch 3/5] unifies current mailbox, reset and service work into one. [patch 4/5] allocates a private work queue with WQ_MEM_RECLAIM for the HNS3 driver. [patch 5/5] adds a new flag to indicate whether reset fails, and prevent scheduling service task to handle periodic task when this flag has been set. ==================== Signed-off-by: -
Guojia Liao authored
service_task will be scheduled per second to do some periodic jobs. When reset fails, it means this device is not available now, so the periodic jobs do not need to be handled. This patch adds flag HCLGE_STATE_RST_FAIL/HCLGEVF_STATE_RST_FAIL to indicate that reset fails, and checks this flag before schedule periodic task. Signed-off-by:
Guojia Liao <liaoguojia@huawei.com> Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
-
Yunsheng Lin authored
The hns3 driver may be used in memory reclaim path when it is the low level transport of a network file system, so it needs to guarantee forward progress even under memory pressure. This patch allocates a private WQ with WQ_MEM_RECLAIM set for both hclge_main and hclgevf_main modules. Signed-off-by:
Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by:
-
Yunsheng Lin authored
There are four work (mbx_service_task, service_task, rst_service_task and keep_alive_task)in the hclgevf module, mbx_service_task is for handling mailbox issue, service_task is for periodic management issue and rst_service_task is for reset related issue, keep_alive_task is used to keepalive between PF and VF, which can be done in a single work. This patch removes the mbx_service_task, rst_service_task and keep_alive_task, and moves the related handling to the service_task work in order to remove concurrency between the four work and to improve efficiency. Signed-off-by:
-
Yunsheng Lin authored
There are three work (mbx_service_task, service_task, rst_service_task) in the HNS3 driver, mbx_service_task is for handling mailbox work, service_task is for periodic management issue and rst_service_task is for reset related issue, which can be handled in a single work. This patch removes the mbx_service_task and rst_service_task work, and moves the related handling to the service_task work in order to remove concurrency between the three work and to improve efficiency. BTW, since stats_timer in struct hclge_hw_stats is not needed anymore, so removes the definition of struct hclge_hw_stats, and moves mac_stats into struct hclge_dev. Signed-off-by:
-
Yunsheng Lin authored
Currently, a timer is defined to schedule hclgevf_service per second. To simplify the code, this patch uses the delayed work instead of timer to schedule hclgevf_serive. Signed-off-by:
-
Sven Eckelmann authored
The sparse commit 6002ded74587 ("add a flag to warn on casts to/from bitwise pointers") introduced a check for non-direct casts from/to restricted datatypes (when -Wbitwise-pointer is enabled). This triggered a warning in the 64 bit optimized ipv6_addr_is_*() functions because sparse doesn't know that the buffer already points to some data in the correct bitwise integer format. But these were correct and can therefore be marked with __force to signalize sparse an intended cast to a specific bitwise type. Signed-off-by:Sven Eckelmann <sven@narfation.org> Signed-off-by:
-
Sven Eckelmann authored
The sparse commit 6002ded74587 ("add a flag to warn on casts to/from bitwise pointers") introduced a check for non-direct casts from/to restricted datatypes (when -Wbitwise-pointer is enabled). This triggered a warning in ipv6_get_dsfield() because sparse doesn't know that the buffer already points to some data in the correct bitwise integer format. This was already fixed in ipv6_change_dsfield() by the __force attribute and can be fixed here the same way. Signed-off-by:
-
- 16 Dec, 2019 1 commit
-
-
Heiner Kallweit authored
Some users complained about problems with r8169 and it turned out that the generic PHY driver was used instead instead of the dedicated one. In all cases reason was that r8169.ko was in initramfs, but realtek.ko not. Manually adding realtek.ko to initramfs fixed the issues. Root cause seems to be that tools like dracut and genkernel don't consider softdeps. Add a check for loaded Realtek PHY driver module and provide the user with a hint if it's not loaded. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
