As Stephen pointed out the default initial size is more than we need, so
let's start small (4 elements, thus nelem_hint = 3). Also limit the hash
locks to the number of CPUs as we don't need any write-side scaling and
this looks like the minimum.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter/IPVS updates for net-next

The following pull request contains Netfilter/IPVS updates for net-next
containing 90 patches from Eric Biederman.

The main goal of this batch is to avoid recurrent lookups for the netns
pointer, that happens over and over again in our Netfilter/IPVS code. The idea
consists of passing netns pointer from the hook state to the relevant functions
and objects where this may be needed.

You can find more information on the IPVS updates from Simon Horman's commit
merge message:

c3456026 ("Merge tag 'ipvs2-for-v4.4' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/ipvs-next").

Exceptionally, this time, I'm not posting the patches again on netdev, Eric
already Cc'ed this mailing list in the original submission. If you need me to
make, just let me know.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Because of the default 0 value of ret in dsa_slave_port_attr_set, a
driver may return -EOPNOTSUPP from the commit phase of a STP state,
which triggers a WARN() from switchdev.

This happened on a 6185 switch which does not support hardware bridging.
Reported-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for filtering neighbor dumps by master device by adding
the NDA_MASTER attribute to the dump request. A new netlink flag,
NLM_F_DUMP_FILTERED, is added to indicate the kernel supports the
request and output is filtered as requested.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp_v6_md5_do_lookup() now takes a const socket, even if
CONFIG_TCP_MD5SIG is not set.

Fixes: b83e3deb ("tcp: md5: constify tcp_md5_do_lookup() socket argument")
From: Eric Dumazet <edumazet@google.com>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Vivien Didelot says:

====================
net: switchdev: use specific switchdev_obj_*

This patchset changes switchdev add, del, dump operations from this:

    int     (*switchdev_port_obj_add)(struct net_device *dev,
                                      struct switchdev_obj *obj,
                                      struct switchdev_trans *trans);
    int     (*switchdev_port_obj_del)(struct net_device *dev,
                                      struct switchdev_obj *obj);
    int     (*switchdev_port_obj_dump)(struct net_device *dev,
                                      struct switchdev_obj *obj);

to something similar to the notifier_call callback of a notifier_block:

    int     (*switchdev_port_obj_add)(struct net_device *dev,
                                      enum switchdev_obj_id id,
                                      const void *obj,
                                      struct switchdev_trans *trans);
    int     (*switchdev_port_obj_del)(struct net_device *dev,
                                      enum switchdev_obj_id id,
                                      const void *obj);
    int     (*switchdev_port_obj_dump)(struct net_device *dev,
                                       enum switchdev_obj_id id, void *obj,
                                       int (*cb)(void *obj));

This allows the caller to pass and expect back a specific switchdev_obj_*
structure (e.g. switchdev_obj_fdb) instead of the generic switchdev_obj one.

This will simplify pushing the callback function down to the drivers.

The first 3 patches get rid of the dev parameter of the dump callback, since it
is not always neeeded (e.g. vlan_dump) and some drivers (such as DSA drivers)
may not have easy access to it.

Patches 4 and 5 implement the change in the switchdev operations and its users.

Patch 6 extracts the inner switchdev_obj_* structures from switchdev_obj and
removes this last one.

v2: fix error spotted by kbuild (extra ';' inline switchdev_port_obj_dump).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Now that switchdev and its drivers directly use specific switchdev_obj_*
structures, move them out of the switchdev_obj union and get rif of this
outer structure.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Similar to the notifier_call callback of a notifier_block, change the
function signature of switchdev add and del operations to:

    int switchdev_port_obj_add/del(struct net_device *dev,
                                   enum switchdev_obj_id id, void *obj);

This allows the caller to pass a specific switchdev_obj_* structure
instead of the generic switchdev_obj one.

Drivers implementation of these operations and switchdev have been
changed accordingly.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Similar to the notifier_call callback of a notifier_block, change the
function signature of switchdev dump operation to:

    int switchdev_port_obj_dump(struct net_device *dev,
                                enum switchdev_obj_id id, void *obj,
                                int (*cb)(void *obj));

This allows the caller to pass and expect back a specific
switchdev_obj_* structure instead of the generic switchdev_obj one.

Drivers implementation of dump operation can now expect this specific
structure and call the callback with it. Drivers have been changed
accordingly.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The net_device associated to a dump operation does not have to be passed
to the callback. switchdev stores it in a superset struct, if needed.

Also some drivers (such as DSA drivers) may not have easy access to it.

This will simplify pushing the callback function down to the drivers.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The FDB dump callback requires the related net_device so move it to the
struct switchdev_fdb_dump superset instead of using a callback param.

With this done, it'll be simpler to change the dump function signature.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The static switchdev_port_vlan_dump_put function does not need the
net_device parameter, so remove it.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Geert Uytterhoeven says:

====================
net: m68k: Allow modular build

This patch series makes the remaining m68k Ethernet drivers modular.
It's an alternative to the last 3 patches of Paul Gortmaker's series
"[PATCH net-next 0/6] make non-modular code explicitly non-modular".

Note that "[PATCH 5/5] net: macmace: Allow modular build" depends on
"[PATCH 4/5] m68k/mac: Export Peripheral System Controller (PSC) base
address to modules". Feel free to take the dependency through the netdev
tree to avoid modular build breakage.

This was compile-tested only (mac_defconfig + allmodconfig) due to lack
of hardware.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

If CONFIG_MACMACE=m:

    ERROR: psc [drivers/net/ethernet/apple/macmace.ko] undefined!

Add the missing export to fix this.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

If CONFIG_HPLANCE=m and CONFIG_NET_POLL_CONTROLLER=y:

    ERROR: "lance_poll" [drivers/net/ethernet/amd/hplance.ko] undefined!

Add the missing export to fix this.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The modular driver supports only one card, just like the built-in
driver.

Note that this limitation is a problem which affects all Nubus card
drivers, because they have to do all their own bus matching, because
Nubus still lacks the necessary driver model support.
Suggested-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

commit dea87024 ("dsa: mv88e6xxx: Allow speed/duplex of port to be
configured") leads to the following static checker warning:

        drivers/net/dsa/mv88e6xxx.c:585 mv88e6xxx_adjust_link()
        warn: unsigned 'ret' is never less than zero.

drivers/net/dsa/mv88e6xxx.c
   573  void mv88e6xxx_adjust_link(struct dsa_switch *ds, int port,
   574                             struct phy_device *phydev)
   575  {
   576          struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
   577          u32 ret, reg;
   578
   579          if (!phy_is_pseudo_fixed_link(phydev))
   580                  return;
   581
   582          mutex_lock(&ps->smi_mutex);
   583
   584          ret = _mv88e6xxx_reg_read(ds, REG_PORT(port), PORT_PCS_CTRL);
   585          if (ret < 0)

Make ret an int, which is the return type for _mv88e6xxx_reg_read()
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

David Ahern says:

====================
net: L3 master device

The VRF device is essentially a Layer 3 master device used to associate
netdevices with a specific routing table and to influence FIB lookups
via 'ip rules' and controlling the oif/iif used for the lookup.

This series generalizes the VRF into L3 master device, l3mdev. Similar
to switchdev it has a Kconfig option and separate set of operations
in net_device allowing it to be completely compiled out if not wanted.
The l3mdev methods rely on the 'master' aspect and use of
netdev_master_upper_dev_get_rcu to retrieve the master device from a
given netdevice if it is enslaved to an L3_MASTER.

The VRF device is converted to use the l3mdev operations. At the end the
vrf_ptr is no longer and removed, as are all direct references to VRF.
The end result is a much simpler implementation for VRF.

Thanks to Nikolay for suggestions (eg., use of the master linkage which
is the key to making this work) and to Roopa, Andy and Shrijeet for
early reviews.

v3
- added license header to l3mdev.c

- export symbols in l3mdev.c for use with GPL modules

- removed netdevice header from l3mdev.h (not needed) and fixed
  typo in comment

v2
- rebased to top of net-next
- addressed Niks comments (checking master, removing extra lines, and
  flipping the order of patches 1 and 2)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Change CONFIG dependency to CONFIG_NET_L3_MASTER_DEV as well.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move remaining structs to VRF driver and delete the vrf header file.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Replace calls to vrf_dev_get_rth with l3mdev_get_rtable.
The check on the flow flags is handled in the l3mdev operation.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Replace calls to vrf_dev_table and friends with l3mdev_fib_table
and kin.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Replace calls to vrf_master_ifindex_rcu and vrf_master_ifindex with either
l3mdev_master_ifindex_rcu or l3mdev_master_ifindex.

The pattern:
    oif = vrf_master_ifindex(dev) ? : dev->ifindex;
is replaced with
    oif = l3mdev_fib_oif(dev);

And remove the now unused vrf macros.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

L3 master devices allow users of the abstraction to influence FIB lookups
for enslaved devices. Current API provides a means for the master device
to return a specific FIB table for an enslaved device, to return an
rtable/custom dst and influence the OIF used for fib lookups.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Rename IFF_VRF_MASTER to IFF_L3MDEV_MASTER and update the name of the
netif_is_vrf and netif_index_is_vrf macros.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Eric Dumazet says:

====================
tcp: listener refactoring preparations

This patch series makes changes to TCP/DCCP stacks so that
we can switch listener code to lockless mode.

This is done by marking const the listener socket in all
appropriate paths.

FastOpen code had to be changed to not dynamically allocate
a very small structure to make code simpler for following changes.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

While auditing TCP stack for upcoming 'lockless' listener changes,
I found I had to change fastopen_init_queue() to properly init the object
before publishing it.

Otherwise an other cpu could try to lock the spinlock before it gets
properly initialized.

Instead of adding appropriate barriers, just remove dynamic memory
allocations :
- Structure is 28 bytes on 64bit arches. Using additional 8 bytes
  for holding a pointer seems overkill.
- Two listeners can share same cache line and performance would suffer.

If we really want to save few bytes, we would instead dynamically allocate
whole struct request_sock_queue in the future.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp_syn_flood_action() will soon be called with unlocked socket.
In order to avoid SYN flood warning being emitted multiple times,
use xchg().
Extend max_qlen_log and synflood_warned fields in struct listen_sock
to u32
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

These functions do not change the listener socket.
Goal is to make sure tcp_conn_request() is not messing with
listener in a racy way.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some common IPv4/IPv6 code can be factorized.
Also constify cookie_init_sequence() socket argument.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We'll soon no longer hold listener socket lock, these
functions do not modify the socket in any way.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This method does not touch the listener socket.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

socket no longer needs to be read/write
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

socket is not touched, make it const.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The socket points to the (shared) listener.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>