- 12 Aug, 2019 1 commit
-
-
Keyon Jie authored
We need add DAPM MIC endpoint widget "SoC DMIC" and route, to enable DMIC PCM DAPM support. Signed-off-by: Keyon Jie <yang.jie@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190809232236.21182-3-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 09 Aug, 2019 1 commit
-
-
Takashi Iwai authored
hdac_hdmi_present_sense() calls the audio component to get ELD update, then it reports the jack status change and updates DAPM graph accordingly. This works when it's called from the normal code paths. However, it may lead to a dead lock when it's called from the audio component notifier. Namely, the DAPM update involves with the runtime PM, and it eventually calls again the audio component get_power() ops. Since i915 driver already takes a mutex around the audio component ops calls, we'll eventually get the mutex doubly. As a workaround, in this patch, only the jack state is updated in the code path from hdac_hdmi_eld_notify_cb(), and the DAPM update is deferred to a work so that it's processed in another context. Reported-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20190809151531.24359-1-tiwai@suse.deSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 08 Aug, 2019 1 commit
-
-
Keyon Jie authored
There is a race between hda codec device removing and the jack-detecting work, which will lead to a page fault issue as the latter work is accessing codec device which could be already removed. Here add the cancellation of jack-detecting work before codecs are actually removed to avoid the race and fix the issue. Bug: https://github.com/thesofproject/linux/issues/1067Signed-off-by: Keyon Jie <yang.jie@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190807145030.26117-1-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 07 Aug, 2019 2 commits
-
-
Ranjani Sridharan authored
On some platforms, sound card registration fails when a HDMI monitor is not connected. This is caused by a recent commit that switched the order in which the HDA controller and the i915 are initialized. Initializing the i915 before initializing the HDA controller fixes the problem. Fixes: be1b577d ("ASoC: SOF: Intel: hda: fix the hda init chip" Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20190806221958.19180-1-ranjani.sridharan@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
ADG is using clk_get_rate() under atomic context, thus, we might have scheduling issue. To avoid this issue, we need to get/keep clk rate under non atomic context. We need to handle ADG as special device at Renesas Sound driver. From SW point of view, we want to impletent it as rsnd_mod_ops :: prepare, but it makes code just complicate. To avoid complicated code/patch, this patch adds new clk_rate[] array, and keep clk IN rate when rsnd_adg_clk_enable() was called. Reported-by: Leon Kong <Leon.KONG@cn.bosch.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Leon Kong <Leon.KONG@cn.bosch.com> Link: https://lore.kernel.org/r/87v9vb0xkp.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 06 Aug, 2019 1 commit
-
-
Mark Brown authored
Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 02 Aug, 2019 2 commits
-
-
Vijendar Mukunda authored
We shouldn't assume CPU physical address we get from page_to_phys() is same as DMA address we get from dma_alloc_coherent(). On x86_64, we won't run into any problem with the assumption when dma_ops is nommu_dma_ops. However, DMA address is IOVA when IOMMU is enabled. And it's most likely different from CPU physical address when AMD IOMMU is not in passthrough mode. This patch fixes page faults when IOMMU is enabled. Signed-off-by: Vijendar Mukunda <vijendar.mukunda@amd.com> Link: https://lore.kernel.org/r/1564753899-17124-2-git-send-email-Vijendar.Mukunda@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Vijendar Mukunda authored
AMD platform device acp3x_rv_i2s created by parent PCI device driver. Pass struct device of the parent to snd_pcm_lib_preallocate_pages() so dma_alloc_coherent() can use correct dma_ops. Otherwise, it will use default dma_ops which is nommu_dma_ops on x86_64 even when IOMMU is enabled and set to non passthrough mode. Signed-off-by: Vijendar Mukunda <vijendar.mukunda@amd.com> Link: https://lore.kernel.org/r/1564753899-17124-1-git-send-email-Vijendar.Mukunda@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 31 Jul, 2019 3 commits
-
-
fengchunguo authored
88200 and 96000 sampling rate was not enabled on driver, so can't be played. The error information: max98373 3-0031:rate 96000 not supported max98373 3-0031:ASoC: can't set max98373-aif1 hw params: -22 Signed-off-by: fengchunguo <chunguo.feng@amlogic.com> Link: https://lore.kernel.org/r/20190731074156.5620-1-chunguo.feng@amlogic.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Marcus Cooper authored
The A64 audio codec uses the original I2S block but the SR and WSS computation currently assigned is for the newer block. Fixes: 619c15f7 (ASoC: sun4i-i2s: Change SR and WSS computation) Signed-off-by: Marcus Cooper <codekipper@gmail.com> Link: https://lore.kernel.org/r/20190729152130.27955-1-codekipper@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Cezary Rojewski authored
Adding myself to Intel ASoC drivers maintainers list. Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190726181517.27655-1-cezary.rojewski@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 26 Jul, 2019 4 commits
-
-
Peter Ujfalusi authored
The slot_width is a property for the bus while the constraint for SNDRV_PCM_HW_PARAM_SAMPLE_BITS is for the in memory format. Applying slot_width constraint to sample_bits works most of the time, but it will blacklist valid formats in some cases. With slot_width 24 we can support S24_3LE and S24_LE formats as they both look the same on the bus, but a a 24 constraint on sample_bits would not allow S24_LE as it is stored in 32bits in memory. Implement a simple hw_rule function to allow all formats which require less or equal number of bits on the bus as slot_width (if configured). Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20190726064244.3762-2-peter.ujfalusi@ti.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Cheng-Yi Chiang authored
This reverts commit db51707b. Revert "ASoC: rockchip: i2s: Support mono capture" Previous discussion in https://patchwork.kernel.org/patch/10147153/ explains the issue of the patch. While device is configured as 1-ch, hardware is still generating a 2-ch stream. When user space reads the data and assumes it is a 1-ch stream, the rate will be slower by 2x. Revert the change so 1-ch is not supported. User space can selectively take one channel data out of two channel if 1-ch is preferred. Currently, both channels record identical data. Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org> Link: https://lore.kernel.org/r/20190726044202.26866-1-cychiang@chromium.orgSigned-off-by: Mark Brown <broonie@kernel.org>
-
Christophe JAILLET authored
Fix some typo to have the filaname given in a comment match the real name of the file. Some 'acpi' have erroneously been written 'apci' Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/20190725053523.16542-1-christophe.jaillet@wanadoo.frSigned-off-by: Mark Brown <broonie@kernel.org>
-
Peter Ujfalusi authored
When running McASP as master capture alone will not record any audio unless a parallel playback stream is running. As soon as the playback stops the captured data is going to be silent again. In McASP master mode we need to set the PDIR for the clock pins and fix the mcasp_set_axr_pdir() to skip the bits in the PDIR registers above AMUTE. This went unnoticed as most of the boards uses McASP as slave and neither of these issues are visible (audible) in those setups. Fixes: ca3d9433 ("ASoC: davinci-mcasp: Update PDIR (pin direction) register handling") Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20190725083423.7321-1-peter.ujfalusi@ti.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 24 Jul, 2019 1 commit
-
-
Ricard Wanderlof authored
If the DAI format setup fails, there is no valid communication format between CPU and CODEC, so fail card instantiation, rather than continue with a card that will most likely not function properly. Signed-off-by: Ricard Wanderlof <ricardw@axis.com> Link: https://lore.kernel.org/r/alpine.DEB.2.20.1907241132350.6338@lnxricardw1.se.axis.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 23 Jul, 2019 2 commits
-
-
Kai Vehmanen authored
Downgrade "nothing to do in IRQ thread" message from error to a debug message in the IPC interrupt handler thread. The spurious wake-up can happen if a HDA stream interrupt is raised while the IPC interrupt thread is running. IPC functionality is not impacted by this condition, so debug is a more appropriate trace level. Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190722141402.7194-21-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Stephan Gerhold authored
apq8016_sbc_parse_of() sets up multiple DAI links, depending on the number of nodes in the device tree. However, at the moment CPU and platform components are only allocated for the first link. This causes an oops when more than one link is defined: Internal error: Oops: 96000044 [#1] SMP CPU: 0 PID: 1015 Comm: kworker/0:2 Not tainted 5.3.0-rc1 #4 Call trace: apq8016_sbc_platform_probe+0x1a8/0x3f0 platform_drv_probe+0x50/0xa0 ... Move the allocation inside the loop to ensure that each link is properly initialized. Fixes: 98b232ca ("ASoC: qcom: apq8016_sbc: use modern dai_link style") Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/20190722130352.95874-1-stephan@gerhold.netSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 22 Jul, 2019 5 commits
-
-
Wenwen Wang authored
In snd_soc_dapm_new_control_unlocked(), a kernel buffer is allocated in dapm_cnew_widget() to hold the new dapm widget. Then, different actions are taken according to the id of the widget, i.e., 'w->id'. If any failure occurs during this process, snd_soc_dapm_new_control_unlocked() should be terminated by going to the 'request_failed' label. However, the allocated kernel buffer is not freed on this code path, leading to a memory leak bug. To fix the above issue, free the buffer before returning from snd_soc_dapm_new_control_unlocked() through the 'request_failed' label. Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu> Link: https://lore.kernel.org/r/1563803864-2809-1-git-send-email-wang6495@umn.eduSigned-off-by: Mark Brown <broonie@kernel.org>
-
Masahiro Yamada authored
When CONFIG_UAPI_HEADER_TEST=y, exported headers are compile-tested to make sure they can be included from user-space. Currently, header.h and fw.h are excluded from the test coverage. To make them join the compile-test, we need to fix the build errors attached below. For a case like this, we decided to use __u{8,16,32,64} variable types in this discussion: https://lkml.org/lkml/2019/6/5/18 Build log: CC usr/include/sound/sof/header.h.s CC usr/include/sound/sof/fw.h.s In file included from <command-line>:32:0: ./usr/include/sound/sof/header.h:19:2: error: unknown type name ‘uint32_t’ uint32_t magic; /**< 'S', 'O', 'F', '\0' */ ^~~~~~~~ ./usr/include/sound/sof/header.h:20:2: error: unknown type name ‘uint32_t’ uint32_t type; /**< component specific type */ ^~~~~~~~ ./usr/include/sound/sof/header.h:21:2: error: unknown type name ‘uint32_t’ uint32_t size; /**< size in bytes of data excl. this struct */ ^~~~~~~~ ./usr/include/sound/sof/header.h:22:2: error: unknown type name ‘uint32_t’ uint32_t abi; /**< SOF ABI version */ ^~~~~~~~ ./usr/include/sound/sof/header.h:23:2: error: unknown type name ‘uint32_t’ uint32_t reserved[4]; /**< reserved for future use */ ^~~~~~~~ ./usr/include/sound/sof/header.h:24:2: error: unknown type name ‘uint32_t’ uint32_t data[0]; /**< Component data - opaque to core */ ^~~~~~~~ In file included from <command-line>:32:0: ./usr/include/sound/sof/fw.h:49:2: error: unknown type name ‘uint32_t’ uint32_t size; /* bytes minus this header */ ^~~~~~~~ ./usr/include/sound/sof/fw.h:50:2: error: unknown type name ‘uint32_t’ uint32_t offset; /* offset from base */ ^~~~~~~~ ./usr/include/sound/sof/fw.h:64:2: error: unknown type name ‘uint32_t’ uint32_t size; /* bytes minus this header */ ^~~~~~~~ ./usr/include/sound/sof/fw.h:65:2: error: unknown type name ‘uint32_t’ uint32_t num_blocks; /* number of blocks */ ^~~~~~~~ ./usr/include/sound/sof/fw.h:73:2: error: unknown type name ‘uint32_t’ uint32_t file_size; /* size of file minus this header */ ^~~~~~~~ ./usr/include/sound/sof/fw.h:74:2: error: unknown type name ‘uint32_t’ uint32_t num_modules; /* number of modules */ ^~~~~~~~ ./usr/include/sound/sof/fw.h:75:2: error: unknown type name ‘uint32_t’ uint32_t abi; /* version of header format */ ^~~~~~~~ Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Link: https://lore.kernel.org/r/20190721142308.30306-1-yamada.masahiro@socionext.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Enric Balletbo i Serra authored
The TS3A227E says that the headset keypress detection needs the MICBIAS power in order to report the key events to ensure proper operation The headset keypress detection needs the MICBIAS power in order to report the key events all the time as long as MIC is present. So MICBIAS pin is forced on when a MICROPHONE is detected. On Veyron Minnie I observed that if the MICBIAS power is not present and the key press detection is activated (just because it is enabled when you insert a headset), it randomly reports a keypress on insert. E.g. (KEY_PLAYPAUSE) Event: (SW_HEADPHONE_INSERT), value 1 Event: (SW_MICROPHONE_INSERT), value 1 Event: -------------- SYN_REPORT ------------ Event: (KEY_PLAYPAUSE), value 1 Userspace thinks that KEY_PLAYPAUSE is pressed and produces the annoying effect that the media player starts a play/pause loop. Note that, although most of the time the key reported is the one associated with BTN_0, not always this is true. On my tests I also saw different keys reported Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Link: https://lore.kernel.org/r/20190719173929.24065-1-enric.balletbo@collabora.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Shengjiu Wang authored
When sample rate of TX is different with sample rate of RX in async mode, the MFreq selection will be wrong. For example, sysclk = 24.576MHz, TX rate = 96000Hz, RX rate = 48000Hz. Then ratio of TX = 256, ratio of RX = 512, For MFreq is shared by TX and RX instance, the correct value of MFreq is 2 for both TX and RX. But original method will cause MFreq = 0 for TX, MFreq = 2 for RX. If TX is started after RX, RX will be impacted, RX work abnormal with MFreq = 0. This patch is to select proper MFreq value according to TX rate and RX rate. Fixes: 0c516b4f ("ASoC: cs42xx8: Add codec driver support for CS42448/CS42888") Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/20190716094547.46787-1-shengjiu.wang@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Charles Keepax authored
DPCM uses snd_soc_dapm_dai_get_connected_widgets to build a list of the widgets connected to a specific front end DAI so it can search through this list for available back end DAIs. The custom_stop_condition was added to is_connected_ep to facilitate this list not containing more widgets than is necessary. Doing so both speeds up the DPCM handling as less widgets need to be searched and avoids issues with CODEC to CODEC links as these would be confused with back end DAIs if they appeared in the list of available widgets. custom_stop_condition was implemented by aborting the graph walk when the condition is triggered, however there is an issue with this approach. Whilst walking the graph is_connected_ep should update the endpoints cache on each widget, if the walk is aborted the number of attached end points is unknown for that sub-graph. When the stop condition triggered, the original patch ignored the triggering widget and returned zero connected end points; a later patch updated this to set the triggering widget's cache to 1 and return that. Both of these approaches result in inaccurate values being stored in various end point caches as the values propagate back through the graph, which can result in later issues with widgets powering/not powering unexpectedly. As the original goal was to reduce the size of the widget list passed to the DPCM code, the simplest solution is to limit the functionality of the custom_stop_condition to the widget list. This means the rest of the graph will still be processed resulting in correct end point caches, but only widgets up to the stop condition will be added to the returned widget list. Fixes: 6742064a ("ASoC: dapm: support user-defined stop condition in dai_get_connected_widgets") Fixes: 5fdd022c ("ASoC: dpcm: play nice with CODEC<->CODEC links") Fixes: 09464974 ("ASoC: dapm: Fix to return correct path list in is_connected_ep.") Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20190718084333.15598-1-ckeepax@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 16 Jul, 2019 3 commits
-
-
Hans de Goede authored
The Irbis NB41 netbook has its internal mic on IN2, inverted jack-detect and stereo speakers, add a quirk for this. Cc: russianneuromancer@ya.ru Reported-and-tested-by: russianneuromancer@ya.ru Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20190712112708.25327-1-hdegoede@redhat.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Wen Yang authored
The cpu_dai variable is still being used after the of_node_put() call, which may result in double-free: of_node_put(cpu_dai); ---> released here ret = devm_snd_soc_register_card(dev, card); if (ret < 0) { ... goto err_put_clk_i2s; --> jump to err_put_clk_i2s ... err_put_clk_i2s: clk_put(priv->clk_i2s_bus); err_put_sclk: clk_put(priv->sclk_i2s); err_put_cpu_dai: of_node_put(cpu_dai); --> double-free here Fixes: d832d2b2 ("ASoC: samsung: odroid: Fix of_node refcount unbalance") Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Sangbeom Kim <sbkim73@samsung.com> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Cc: alsa-devel@alsa-project.org Cc: linux-kernel@vger.kernel.org Link: https://lore.kernel.org/r/1562989575-33785-3-git-send-email-wen.yang99@zte.com.cnSigned-off-by: Mark Brown <broonie@kernel.org>
-
Wen Yang authored
The codec variable is still being used after the of_node_put() call, which may result in use-after-free. Fixes: bc3cf17b ("ASoC: samsung: odroid: Add support for secondary CPU DAI") Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Sangbeom Kim <sbkim73@samsung.com> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Cc: alsa-devel@alsa-project.org Cc: linux-kernel@vger.kernel.org Link: https://lore.kernel.org/r/1562989575-33785-2-git-send-email-wen.yang99@zte.com.cnSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 11 Jul, 2019 2 commits
-
-
Kuninori Morimoto authored
commit c152f849 ("ASoC: audio-graph-card: fix an use-after-free in graph_get_dai_id()") fixups use-after-free issue, but, it need to use "const" for reg. This patch adds it. We will have below without this patch LINUX/sound/soc/generic/audio-graph-card.c: In function 'graph_get_dai_id': LINUX/sound/soc/generic/audio-graph-card.c:87:7: warning: assignment discards\ 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] reg = of_get_property(node, "reg", NULL); Fixes: c152f849 ("ASoC: audio-graph-card: fix an use-after-free in graph_get_dai_id()") Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Wen Yang <wen.yang99@zte.com.cn> Link: https://lore.kernel.org/r/87sgrd43ja.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Shuming Fan authored
There are two issues to fix: - DC offset calibration data will be reset after stopping playback. - DC offset calibration data should be applied in the initial setting. Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20190711082214.8142-1-shumingf@realtek.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 10 Jul, 2019 9 commits
-
-
Wen Yang authored
After calling of_node_put() on the node variable, it is still being used, which may result in use-after-free. Fix this issue by calling of_node_put() after the last usage. Fixes: a0c426fe ("ASoC: simple-card-utils: check "reg" property on asoc_simple_card_get_dai_id()") Link: https://lore.kernel.org/r/1562743509-30496-5-git-send-email-wen.yang99@zte.com.cnSigned-off-by: Wen Yang <wen.yang99@zte.com.cn> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Wen Yang authored
After calling of_node_put() on the ports, port, and node variables, they are still being used, which may result in use-after-free. Fix this issue by calling of_node_put() after the last usage. Fixes: dd98fbc5 ("ASoC: audio-graph-card: cleanup DAI link loop method - step1") Link: https://lore.kernel.org/r/1562743509-30496-4-git-send-email-wen.yang99@zte.com.cnSigned-off-by: Wen Yang <wen.yang99@zte.com.cn> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Wen Yang authored
The codec variable is still being used after the of_node_put() call, which may result in use-after-free. Fixes: d947cdfd ("ASoC: simple-card: cleanup DAI link loop method - step1") Link: https://lore.kernel.org/r/1562743509-30496-3-git-send-email-wen.yang99@zte.com.cnSigned-off-by: Wen Yang <wen.yang99@zte.com.cn> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Wen Yang authored
The node variable is still being used after the of_node_put() call, which may result in use-after-free. Fixes: cfc652a7 ("ASoC: simple-card: tidyup prefix for snd_soc_codec_conf") Link: https://lore.kernel.org/r/1562743509-30496-2-git-send-email-wen.yang99@zte.com.cnSigned-off-by: Wen Yang <wen.yang99@zte.com.cn> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
commit 34614739 ("ASoC: soc-core: support dai_link with platforms_num != 1") supports multi Platform, and commit 9f3eb917 ("ASoC: simple-card-utils: consider CPU-Platform possibility") removed no Platform from simple-card. Multi Platform is now checking both Platform name/of_node are NULL case. But in normal case, DPCM be doesn't have Platform. asoc_simple_canonicalize_platform() try to use CPU of_node to Platform (This is needed for DMAEngine platform case), but it still might be NULL at DPCM be. This patch try to use no Platform after that if Platform of_node is still NULL. It can't probe without this patch. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87muhmgw2o.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
props->xxx_dai might be NULL when DPCM. This patch cares it for debug. Fixes: commit 0580dde5 ("ASoC: simple-card-utils: add asoc_simple_debug_info()") Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87o922gw4u.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Kirill Marinushkin authored
Signed-off-by: Kirill Marinushkin <kmarinushkin@birdec.com> Link: https://lore.kernel.org/r/20190710055135.21377-1-kmarinushkin@birdec.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Joe Perches authored
These are source files not executable. Signed-off-by: Joe Perches <joe@perches.com> Link: https://lore.kernel.org/r/d198a3e6ed3a0e9070afeb6aca69903c3e985149.camel@perches.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Tzung-Bi Shih authored
max98357a_daiops_trigger() is possible to be called in atomic context if the .nonatomic flag is equal to 0 in the DAI links. When cancel_delayed_work_sync() in max98357a_daiops_trigger() is called in atomic context, kernel emits the following message: "BUG: sleeping function called from invalid context". According to the DT binding document, value less than or equal to 5ms of sdmod-delay should be sufficient to avoid the pop noise. Use mdelay (i.e. busy loop) for such low delay should be acceptable. Fixes: cec5b01f ("ASoC: max98357a: avoid speaker pop when playback startup") Signed-off-by: Tzung-Bi Shih <tzungbi@google.com> Link: https://lore.kernel.org/r/20190708141901.68797-1-tzungbi@google.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 06 Jul, 2019 3 commits
-
-
Kai Vehmanen authored
Implement runtime idle for CNL/APL devices using similar runtime PM idle logic as the Intel AZX HDA driver. If any HDA codecs are powered when runtime suspend request comes, return -EBUSY. By doing this, strict ordering is enforced between HDA codec and the HDA controller. Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20190702132428.13129-4-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Kai Vehmanen authored
Add ability to implement a SOF device level runtime idle callback. Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20190702132428.13129-3-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Kai Vehmanen authored
Report codec power status to the HDA codec bus from runtime pm suspend and resume callbacks. This is required to implement runtime idle logic that relies on 'codec_powered' field of hdac_bus to be maintained for all codecs. Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20190702132428.13129-2-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>
-