Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Increase the timeout period of the ACMD41 command
   - Add card entry for quirks to debugfs
   - Add mmc_gpiod_set_cd_config() function
   - Store owner from SDIO modules with sdio_register_driver()

  MMC host:
   - atmel-mci: Some cleanups and a switch to use dev_err_probe()
   - renesas_sdhi:
      - Add support for RZ/G2L, RZ/G3S and RZ/V2M variants
      - Set the SDBUF after reset
   - sdhci: Add support for "Tuning Error" interrupts
   - sdhci-acpi:
      - Add quirk to enable pull-up on the card-detect GPIO on Asus
        T100TA
      - Disable write protect detection on Toshiba WT10-A
      - Fix Lenovo Yoga Tablet 2 Pro 1380 sdcard slot not working
   - sdhci_am654:
      - Re-work and fix the tuning support for multiple speed-modes
      - Add tuning algorithm for delay chain
   - sdhci-esdhc-imx: Add NXP S32G3 support
   - sdhci-of-dwcmshc:
      - Add tuning support for Sophgo CV1800B and SG200X
      - Implement SDHCI CQE support
   - sdhci-pci-gli: Use the proper pci_set_power_state() instead of
     PMCSR writes"

  MEMSTICK:
   - Convert a couple of drivers to use the ->remove_new() callback"

* tag 'mmc-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (59 commits)
  mmc: renesas_sdhi: Add compatible string for RZ/G2L family, RZ/G3S, and RZ/V2M SoCs
  dt-bindings: mmc: renesas,sdhi: Document RZ/G2L family compatibility
  dt-bindings: mmc: renesas,sdhi: Group single const value items into an enum list
  mmc: renesas_sdhi: Set the SDBUF after reset
  mmc: core: Increase the timeout period of the ACMD41 command
  mmc: core: Convert to use __mmc_poll_for_busy() SD_APP_OP_COND too
  mmc: atmel-mci: Switch to use dev_err_probe()
  mmc: atmel-mci: Incapsulate used to be a platform data into host structure
  mmc: atmel-mci: Replace platform device pointer by generic one
  mmc: atmel-mci: Use temporary variable for struct device
  mmc: atmel-mci: Get rid of platform data leftovers
  mmc: sdhci-of-dwcmshc: Add tuning support for Sophgo CV1800B and SG200X
  mmc: sdhci-of-dwcmshc: Remove useless "&" of th1520_execute_tuning
  mmc: sdhci-s3c: Choose sdhci_ops based on variant
  mmc: sdhci_am654: Constify struct sdhci_ops
  mmc: sdhci-sprd: Constify struct sdhci_ops
  mmc: sdhci-omap: Constify struct sdhci_ops
  mmc: sdhci-esdhc-mcf: Constify struct sdhci_ops
  mmc: slot-gpio: Use irq_handler_t type
  mmc: sdhci-acpi: Add quirk to enable pull-up on the card-detect GPIO on Asus T100TA
  ...

Pull pmdomain updates from Ulf Hansson:
 "pmdomain core:
   - Don't clear suspended_count at genpd_prepare()
   - Update the rejected/usage counters at system suspend too

  pmdomain providers:
   - ti-sci: Fix duplicate PD referrals
   - mediatek: Add MT8188 buck isolation setting
   - renesas: Add R-Car M3-W power-off delay quirk
   - renesas: Split R-Car M3-W and M3-W+ sub-drivers

  cpuidle-psci:
   - Update MAINTAINERS to set a git for DT IDLE PM DOMAIN/ARM PSCI PM
     DOMAIN
   - Update init level to core_initcall()
   - Drop superfluous wrappers psci_dt_attach|detach_cpu()"

* tag 'pmdomain-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
  pmdomain: ti-sci: Fix duplicate PD referrals
  pmdomain: core: Don't clear suspended_count at genpd_prepare()
  pmdomain: core: Update the rejected/usage counters at system suspend too
  pmdomain: renesas: rcar-sysc: Add R-Car M3-W power-off delay quirk
  pmdomain: renesas: rcar-sysc: Remove rcar_sysc_nullify() helper
  pmdomain: renesas: rcar-sysc: Split R-Car M3-W and M3-W+ sub-drivers
  pmdomain: renesas: rcar-sysc: Absorb rcar_sysc_ch into rcar_sysc_pd
  MAINTAINERS: Add a git for the DT IDLE PM DOMAIN
  MAINTAINERS: Add a git for the ARM PSCI PM DOMAIN
  cpuidle: psci: Update init level to core_initcall()
  cpuidle: psci: Drop superfluous wrappers psci_dt_attach|detach_cpu()
  pmdomain: mediatek: Add MT8188 buck isolation setting
  pmdomain: mediatek: scpsys: drop driver owner assignment

Pull media updates from Mauro Carvalho Chehab:

 - New V4L2 ioctl VIDIOC_REMOVE_BUFS

 - experimental support for using generic metaformats on V4L2 core

 - New drivers: Intel IPU6 controller driver, Broadcom BCM283x/BCM271x

 - More cleanups at atomisp driver

 - Usual bunch of driver cleanups, improvements and fixes

* tag 'media/v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (328 commits)
  media: bcm2835-unicam: Depend on COMMON_CLK
  Revert "media: v4l2-ctrls: show all owned controls in log_status"
  media: ov2740: Ensure proper reset sequence on probe()
  media: intel/ipu6: Don't print user-triggerable errors to kernel log
  media: bcm2835-unicam: Fix driver path in MAINTAINERS
  media: bcm2835-unicam: Fix a NULL vs IS_ERR() check
  media: bcm2835-unicam: Do not print error when irq not found
  media: bcm2835-unicam: Do not replace IRQ retcode during probe
  media: bcm2835-unicam: Convert to platform remove callback returning void
  media: media: intel/ipu6: Fix spelling mistake "remappinp" -> "remapping"
  media: intel/ipu6: explicitly include vmalloc.h
  media: cec.h: Fix kerneldoc
  media: uvcvideo: Refactor iterators
  media: v4l: async: refactor v4l2_async_create_ancillary_links
  media: intel/ipu6: Don't re-allocate memory for firmware
  media: dvb-frontends: tda10048: Fix integer overflow
  media: tc358746: Use the correct div_ function
  media: i2c: st-mipid02: Use the correct div function
  media: tegra-vde: Refactor timeout handling
  media: stk1160: Use min macro
  ...

Pull drm fix from Dave Airlie:

 - fix breakage in buddy allocator

* tag 'drm-next-2024-05-16' of https://gitlab.freedesktop.org/drm/kernel:
  drm/tests: Add a unit test for range bias allocation
  drm/buddy: Fix the range bias clear memory allocation issue

Allocate cleared blocks in the bias range when the DRM
buddy's clear avail is zero. This will validate the bias
range allocation in scenarios like system boot when no
cleared blocks are available and exercise the fallback
path too. The resulting blocks should always be dirty.

v1:(Matthew)
  - move the size to the variable declaration section.
  - move the mm.clear_avail init to allocator init.
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240514145636.16253-2-Arunpravin.PaneerSelvam@amd.com

Problem statement: During the system boot time, an application request
for the bulk volume of cleared range bias memory when the clear_avail
is zero, we dont fallback into normal allocation method as we had an
unnecessary clear_avail check which prevents the fallback method leads
to fb allocation failure following system goes into unresponsive state.

Solution: Remove the unnecessary clear_avail check in the range bias
allocation function.

v2: add a kunit for this corner case (Daniel Vetter)
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Fixes: 96950929 ("drm/buddy: Implement tracking clear page feature")
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240514145636.16253-1-Arunpravin.PaneerSelvam@amd.com

Pull workqueue updates from Tejun Heo:

 - Work items can now be disabled and enabled, and cancel_work_sync()
   and disable_work() can be called form atomic contexts for BH work
   items.

   This closes feature gap with tasklet and should allow converting all
   existing tasklet users to BH workqueues.

 - Improve pool sharing for unbound workqueues with strict affinity.

 - Misc changes including doc updates, improved debug annotations and
   cleanups.

* tag 'wq-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: Use "@..." in function comment to describe variable length argument
  workqueue: Add destroy_work_on_stack() in workqueue_softirq_dead()
  workqueue: remove unnecessary import and function in wq_monitor.py
  workqueue: Introduce enable_and_queue_work() convenience function
  workqueue: add function in event of workqueue_activate_work
  workqueue: Cleanup subsys attribute registration
  workqueue: Use list_last_entry() to get the last idle worker
  workqueue: Move attrs->cpumask out of worker_pool's properties when attrs->affn_strict
  workqueue: Use INIT_WORK_ONSTACK in workqueue_softirq_dead()
  workqueue: Allow cancel_work_sync() and disable_work() from atomic contexts on BH work items
  workqueue: Remember whether a work item was on a BH workqueue
  workqueue: Remove WORK_OFFQ_CANCELING
  workqueue: Implement disable/enable for (delayed) work items
  workqueue: Preserve OFFQ bits in cancel[_sync] paths

Pull cgroup updates from Tejun Heo:

 - The locking around cpuset hotplug processing has always been a bit of
   mess which was worked around by making hotplug processing
   asynchronous. The asynchronity isn't great and led to other issues.

   We tried to make the behavior synchronous a while ago but that led to
   lockdep splats. Waiman took another stab at cleaning up and making it
   synchronous. The patch has been in -next for well over a month and
   there haven't been any complaints, so fingers crossed.

 - Tracepoints added to help understanding rstat lock contentions.

 - A bunch of minor changes - doc updates, code cleanups and selftests.

* tag 'cgroup-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (24 commits)
  cgroup/rstat: add cgroup_rstat_cpu_lock helpers and tracepoints
  selftests/cgroup: Drop define _GNU_SOURCE
  docs: cgroup-v1: Update page cache removal functions
  selftests/cgroup: fix uninitialized variables in test_zswap.c
  selftests/cgroup: cpu_hogger init: use {} instead of {NULL}
  selftests/cgroup: fix clang warnings: uninitialized fd variable
  selftests/cgroup: fix clang build failures for abs() calls
  cgroup/cpuset: Remove outdated comment in sched_partition_write()
  cgroup/cpuset: Fix incorrect top_cpuset flags
  cgroup/cpuset: Avoid clearing CS_SCHED_LOAD_BALANCE twice
  cgroup/cpuset: Statically initialize more members of top_cpuset
  cgroup: Avoid unnecessary looping in cgroup_no_v1()
  cgroup, legacy_freezer: update comment for freezer_css_offline()
  docs, cgroup: add entries for pids to cgroup-v2.rst
  cgroup: don't call cgroup1_pidlist_destroy_all() for v2
  cgroup_freezer: update comment for freezer_css_online()
  cgroup/rstat: desc member cgrp in cgroup_rstat_flush_release
  cgroup/rstat: add cgroup_rstat_lock helpers and tracepoints
  cgroup/pids: Remove superfluous zeroing
  docs: cgroup-v1: Fix description for css_online
  ...

Pull KVM updates from Paolo Bonzini:
 "ARM:

   - Move a lot of state that was previously stored on a per vcpu basis
     into a per-CPU area, because it is only pertinent to the host while
     the vcpu is loaded. This results in better state tracking, and a
     smaller vcpu structure.

   - Add full handling of the ERET/ERETAA/ERETAB instructions in nested
     virtualisation. The last two instructions also require emulating
     part of the pointer authentication extension. As a result, the trap
     handling of pointer authentication has been greatly simplified.

   - Turn the global (and not very scalable) LPI translation cache into
     a per-ITS, scalable cache, making non directly injected LPIs much
     cheaper to make visible to the vcpu.

   - A batch of pKVM patches, mostly fixes and cleanups, as the
     upstreaming process seems to be resuming. Fingers crossed!

   - Allocate PPIs and SGIs outside of the vcpu structure, allowing for
     smaller EL2 mapping and some flexibility in implementing more or
     less than 32 private IRQs.

   - Purge stale mpidr_data if a vcpu is created after the MPIDR map has
     been created.

   - Preserve vcpu-specific ID registers across a vcpu reset.

   - Various minor cleanups and improvements.

  LoongArch:

   - Add ParaVirt IPI support

   - Add software breakpoint support

   - Add mmio trace events support

  RISC-V:

   - Support guest breakpoints using ebreak

   - Introduce per-VCPU mp_state_lock and reset_cntx_lock

   - Virtualize SBI PMU snapshot and counter overflow interrupts

   - New selftests for SBI PMU and Guest ebreak

   - Some preparatory work for both TDX and SNP page fault handling.

     This also cleans up the page fault path, so that the priorities of
     various kinds of fauls (private page, no memory, write to read-only
     slot, etc.) are easier to follow.

  x86:

   - Minimize amount of time that shadow PTEs remain in the special
     REMOVED_SPTE state.

     This is a state where the mmu_lock is held for reading but
     concurrent accesses to the PTE have to spin; shortening its use
     allows other vCPUs to repopulate the zapped region while the zapper
     finishes tearing down the old, defunct page tables.

   - Advertise the max mappable GPA in the "guest MAXPHYADDR" CPUID
     field, which is defined by hardware but left for software use.

     This lets KVM communicate its inability to map GPAs that set bits
     51:48 on hosts without 5-level nested page tables. Guest firmware
     is expected to use the information when mapping BARs; this avoids
     that they end up at a legal, but unmappable, GPA.

   - Fixed a bug where KVM would not reject accesses to MSR that aren't
     supposed to exist given the vCPU model and/or KVM configuration.

   - As usual, a bunch of code cleanups.

  x86 (AMD):

   - Implement a new and improved API to initialize SEV and SEV-ES VMs,
     which will also be extendable to SEV-SNP.

     The new API specifies the desired encryption in KVM_CREATE_VM and
     then separately initializes the VM. The new API also allows
     customizing the desired set of VMSA features; the features affect
     the measurement of the VM's initial state, and therefore enabling
     them cannot be done tout court by the hypervisor.

     While at it, the new API includes two bugfixes that couldn't be
     applied to the old one without a flag day in userspace or without
     affecting the initial measurement. When a SEV-ES VM is created with
     the new VM type, KVM_GET_REGS/KVM_SET_REGS and friends are rejected
     once the VMSA has been encrypted. Also, the FPU and AVX state will
     be synchronized and encrypted too.

   - Support for GHCB version 2 as applicable to SEV-ES guests.

     This, once more, is only accessible when using the new
     KVM_SEV_INIT2 flow for initialization of SEV-ES VMs.

  x86 (Intel):

   - An initial bunch of prerequisite patches for Intel TDX were merged.

     They generally don't do anything interesting. The only somewhat
     user visible change is a new debugging mode that checks that KVM's
     MMU never triggers a #VE virtualization exception in the guest.

   - Clear vmcs.EXIT_QUALIFICATION when synthesizing an EPT Misconfig
     VM-Exit to L1, as per the SDM.

  Generic:

   - Use vfree() instead of kvfree() for allocations that always use
     vcalloc() or __vcalloc().

   - Remove .change_pte() MMU notifier - the changes to non-KVM code are
     small and Andrew Morton asked that I also take those through the
     KVM tree.

     The callback was only ever implemented by KVM (which was also the
     original user of MMU notifiers) but it had been nonfunctional ever
     since calls to set_pte_at_notify were wrapped with
     invalidate_range_start and invalidate_range_end... in 2012.

  Selftests:

   - Enhance the demand paging test to allow for better reporting and
     stressing of UFFD performance.

   - Convert the steal time test to generate TAP-friendly output.

   - Fix a flaky false positive in the xen_shinfo_test due to comparing
     elapsed time across two different clock domains.

   - Skip the MONITOR/MWAIT test if the host doesn't actually support
     MWAIT.

   - Avoid unnecessary use of "sudo" in the NX hugepage test wrapper
     shell script, to play nice with running in a minimal userspace
     environment.

   - Allow skipping the RSEQ test's sanity check that the vCPU was able
     to complete a reasonable number of KVM_RUNs, as the assert can fail
     on a completely valid setup.

     If the test is run on a large-ish system that is otherwise idle,
     and the test isn't affined to a low-ish number of CPUs, the vCPU
     task can be repeatedly migrated to CPUs that are in deep sleep
     states, which results in the vCPU having very little net runtime
     before the next migration due to high wakeup latencies.

   - Define _GNU_SOURCE for all selftests to fix a warning that was
     introduced by a change to kselftest_harness.h late in the 6.9
     cycle, and because forcing every test to #define _GNU_SOURCE is
     painful.

   - Provide a global pseudo-RNG instance for all tests, so that library
     code can generate random, but determinstic numbers.

   - Use the global pRNG to randomly force emulation of select writes
     from guest code on x86, e.g. to help validate KVM's emulation of
     locked accesses.

   - Allocate and initialize x86's GDT, IDT, TSS, segments, and default
     exception handlers at VM creation, instead of forcing tests to
     manually trigger the related setup.

  Documentation:

   - Fix a goof in the KVM_CREATE_GUEST_MEMFD documentation"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (225 commits)
  selftests/kvm: remove dead file
  KVM: selftests: arm64: Test vCPU-scoped feature ID registers
  KVM: selftests: arm64: Test that feature ID regs survive a reset
  KVM: selftests: arm64: Store expected register value in set_id_regs
  KVM: selftests: arm64: Rename helper in set_id_regs to imply VM scope
  KVM: arm64: Only reset vCPU-scoped feature ID regs once
  KVM: arm64: Reset VM feature ID regs from kvm_reset_sys_regs()
  KVM: arm64: Rename is_id_reg() to imply VM scope
  KVM: arm64: Destroy mpidr_data for 'late' vCPU creation
  KVM: arm64: Use hVHE in pKVM by default on CPUs with VHE support
  KVM: arm64: Fix hvhe/nvhe early alias parsing
  KVM: SEV: Allow per-guest configuration of GHCB protocol version
  KVM: SEV: Add GHCB handling for termination requests
  KVM: SEV: Add GHCB handling for Hypervisor Feature Support requests
  KVM: SEV: Add support to handle AP reset MSR protocol
  KVM: x86: Explicitly zero kvm_caps during vendor module load
  KVM: x86: Fully re-initialize supported_mce_cap on vendor module load
  KVM: x86: Fully re-initialize supported_vm_types on vendor module load
  KVM: x86/mmu: Sanity check that __kvm_faultin_pfn() doesn't create noslot pfns
  KVM: x86/mmu: Initialize kvm_page_fault's pfn and hva to error values
  ...

Pull CXL updates from Dave Jiang:

 - Three CXL mailbox passthrough commands are added to support the
   populating and clearing of vendor debug logs:
     - Get Log Capabilities
     - Get Supported Log Sub-List Commands
     - Clear Log

 - Add support of Device Phyiscal Address (DPA) to Host Physical Address
   (HPA) translation for CXL events of cxl_dram and cxl_general media.

   This allows user space to figure out which CXL region the event
   occured via trace event.

 - Connect CXL to CPER reporting.

   If a device is configured for firmware first, CXL event records are
   not sent directly to the host. Those records are reported through EFI
   Common Platform Error Records (CPER). Add support to route the CPER
   records through the CXL sub-system in order to provide DPA to HPA
   translation and also event decoding and tracing. This is useful for
   users to determine which system issues may correspond to specific
   hardware events.

 - A number of misc cleanups and fixes:
     - Fix for compile warning of cxl_security_ops
     - Add debug message for invalid interleave granularity
     - Enhancement to cxl-test event testing
     - Add dev_warn() on unsupported mixed mode decoder
     - Fix use of phys_to_target_node() for x86
     - Use helper function for decoder enum instead of open coding
     - Include missing headers for cxl-event
     - Fix MAINTAINERS file entry
     - Fix cxlr_pmem memory leak
     - Cleanup __cxl_parse_cfmws via scope-based resource menagement
     - Convert cxl_pmem_region_alloc() to scope-based resource management

* tag 'cxl-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (21 commits)
  cxl/cper: Remove duplicated GUID defines
  cxl/cper: Fix non-ACPI-APEI-GHES build
  cxl/pci: Process CPER events
  acpi/ghes: Process CXL Component Events
  cxl/region: Convert cxl_pmem_region_alloc to scope-based resource management
  cxl/acpi: Cleanup __cxl_parse_cfmws()
  cxl/region: Fix cxlr_pmem leaks
  cxl/core: Add region info to cxl_general_media and cxl_dram events
  cxl/region: Move cxl_trace_hpa() work to the region driver
  cxl/region: Move cxl_dpa_to_region() work to the region driver
  cxl/trace: Correct DPA field masks for general_media & dram events
  MAINTAINERS: repair file entry in COMPUTE EXPRESS LINK
  cxl/cxl-event: include missing <linux/types.h> and <linux/uuid.h>
  cxl/hdm: Debug, use decoder name function
  cxl: Fix use of phys_to_target_node() for x86
  cxl/hdm: dev_warn() on unsupported mixed mode decoder
  cxl/test: Enhance event testing
  cxl/hdm: Add debug message for invalid interleave granularity
  cxl: Fix compile warning for cxl_security_ops extern
  cxl/mbox: Add Clear Log mailbox command
  ...

Pull nvdimm updates from Ira Weiny:
 "The changes include removing duplicate code and updating the nvdimm
  tree to the current kernel interfaces such as using const for struct
  device_type and changing the platform remove callback signature"

* tag 'libnvdimm-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  dax: remove redundant assignment to variable rc
  ndtest: Convert to platform remove callback returning void
  nvdimm/btt: always set max_integrity_segments
  nvdimm: remove nd_integrity_init
  dax: constify the struct device_type usage
  powerpc/papr_scm: Move duplicate definitions to common header files

Pull modules updates from Luis Chamberlain:
 "Finally something fun. Mike Rapoport does some cleanup to allow us to
  take out module_alloc() out of modules into a new paint shedded
  execmem_alloc() and execmem_free() so to make emphasis these helpers
  are actually used outside of modules.

  It starts with a non-functional changes API rename / placeholders to
  then allow architectures to define their requirements into a new shiny
  struct execmem_info with ranges, and requirements for those ranges.

  Archs now can intitialize this execmem_info as the last part of
  mm_core_init() if they have to diverge from the norm. Each range is a
  known type clearly articulated and spelled out in enum execmem_type.

  Although a lot of this is major cleanup and prep work for future
  enhancements an immediate clear gain is we get to enable KPROBES
  without MODULES now. That is ultimately what motiviated to pick this
  work up again, now with smaller goal as concrete stepping stone"

* tag 'modules-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
  bpf: remove CONFIG_BPF_JIT dependency on CONFIG_MODULES of
  kprobes: remove dependency on CONFIG_MODULES
  powerpc: use CONFIG_EXECMEM instead of CONFIG_MODULES where appropriate
  x86/ftrace: enable dynamic ftrace without CONFIG_MODULES
  arch: make execmem setup available regardless of CONFIG_MODULES
  powerpc: extend execmem_params for kprobes allocations
  arm64: extend execmem_info for generated code allocations
  riscv: extend execmem_params for generated code allocations
  mm/execmem, arch: convert remaining overrides of module_alloc to execmem
  mm/execmem, arch: convert simple overrides of module_alloc to execmem
  mm: introduce execmem_alloc() and execmem_free()
  module: make module_memory_{alloc,free} more self-contained
  sparc: simplify module_alloc()
  nios2: define virtual address space for modules
  mips: module: rename MODULE_START to MODULES_VADDR
  arm64: module: remove unneeded call to kasan_alloc_module_shadow()
  kallsyms: replace deprecated strncpy with strscpy
  module: allow UNUSED_KSYMS_WHITELIST to be relative against objtree.

Merge tag 'livepatching-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching

Pull livepatching update from Petr Mladek:

 - Use more informative names for the livepatch transition states

* tag 'livepatching-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
  livepatch: Rename KLP_* to KLP_TRANSITION_*

Pull printk updates from Petr Mladek:

 - Use no_printk() instead of "if (0) printk()" constructs to avoid
   generating printk index for messages disabled at compile time

 - Remove deprecated strncpy/strcpy from printk.c

 - Remove redundant CONFIG_BASE_FULL in favor of CONFIG_BASE_SMALL

* tag 'printk-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
  printk: cleanup deprecated uses of strncpy/strcpy
  printk: Remove redundant CONFIG_BASE_FULL
  printk: Change type of CONFIG_BASE_SMALL to bool
  printk: Fix LOG_CPU_MAX_BUF_SHIFT when BASE_SMALL is enabled
  ceph: Use no_printk() helper
  dyndbg: Use *no_printk() helpers
  dev_printk: Add and use dev_no_printk()
  printk: Let no_printk() use _printk()

Pull smb client updates from Steve French:

 - three important fixes to recent netfs conversion to fix various
   xfstest failures, and rmmod oops

 - cleanup patch to fix various GCC-14 warnings

* tag '6.10-rc-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  smb3: fix perf regression with cached writes with netfs conversion
  cifs: Fix locking in cifs_strict_readv()
  cifs: Change from mempool_destroy to mempool_exit for request pools
  smb: smb2pdu.h: Avoid -Wflex-array-member-not-at-end warnings

This file was supposed to be removed in commit 2b7deea3 ("Revert
"kvm: selftests: move base kvm_util.h declarations to kvm_util_base.h""),
but it survived.  Remove it now.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Pull sound updates from Takashi Iwai:
 "This one became bigger than usual, not in the total size but rather
  containing lots of small changes all over the places.

  The majority of changes are about ASoC, especially SOF / Intel stuff,
  and we see an interesting work for ASoC DAPM graph visualization,
  while there are many other code cleanup and refactoring, too.

  Core:
   - A deadlock fix at device disconnection
   - A new tool dapm-graph for visualising the DAPM state

  ASoC:
   - Large updates throughout the Intel audio drivers
   - Fixes and clarifications for the DAPM documentation
   - Cleanups of accessors for driver data, module labelling, and for
     constification
   - Modernsation and cleanup work in the Mediatek drivers
   - Several fixes and features for the DaVinci I2S driver
   - New drivers for several AMD and Intel platforms, Nuvoton NAU8325,
     Rockchip RK3308 and Texas Instruments PCM6240

  HD-audio:
   - Cleanup for CONFIG_PM dependencies
   - Cirrus HD-audio codec fixes and quirks

  Others:
   - Series of tree-wide fixes in Makefiles to use *-y
   - Additions of missing module descriptions
   - Scarlett2 USB mixer enhancements
   - A series of legacy emu10k1 fixes and improvements"

* tag 'sound-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (603 commits)
  ALSA: hda/realtek: Drop doubly quirk entry for 103c:8a2e
  ALSA: hda/realtek - fixed headset Mic not show
  ASoC: SOF: amd: Fix build error with built-in config
  ALSA: scarlett2: Increase mixer range to +12dB
  ALSA: scarlett2: Add S/PDIF source selection controls
  ALSA: core: Remove superfluous CONFIG_PM
  ALSA: Fix deadlocks with kctl removals at disconnection
  ASoC: audio-graph-card2: call of_node_get() before of_get_next_child()
  ASoC: SOF: amd: Correct spaces in Makefile
  ASoC: rt715-sdca-sdw: Fix wrong complete waiting in rt715_dev_resume()
  ASoC: Intel: sof_sdw_rt_amp: use dai parameter
  ASoC: Intel: sof_sdw: add dai parameter to rtd_init callback
  ASoC: Intel: sof_sdw: use .controls/.widgets to add controls/widgets
  ASoC: Intel: sof_sdw: add controls and dapm widgets in codec_info
  ASoC: Intel: sof_sdw: use generic name for controls/widgets
  ASoC: Intel: sof_sdw_cs_amp: rename Speakers to Speaker
  ASoC: Intel: maxim-common: change max98373 data to static
  ASoC: Intel: sof_sdw: add max98373 dapm routes
  ASoC: Intel: sof_rt5682: use max_98373_dai_link function
  ASoC: Intel: sof_nau8825: use max_98373_dai_link function
  ...

Pull fbdev updates from Helge Deller:
 "Code cleanups for offb, shmobile, sisfb, savage, au1200fb, uvesafb,
  omap2 and sh7760fb, as well as the addition of some HAS_IOPORT
  dependencies and adjustment of generated logo file to make build
  reproducible"

* tag 'fbdev-for-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
  fbdev: offb: replace of_node_put with __free(device_node)
  fbdev: savage: Handle err return when savagefb_check_var failed
  video: hdmi: prefer length specifier in format over string copying
  fbdev: uvesafb: replace deprecated strncpy with strscpy_pad
  fbdev: au1200fb: replace deprecated strncpy with strscpy
  fbdev: fsl-diu-fb: replace deprecated strncpy with strscpy_pad
  video: logo: Drop full path of the input filename in generated file
  fbdev: add HAS_IOPORT dependencies
  fbdev: sh7760fb: allow modular build
  fbdev: sisfb: hide unused variables
  fbdev: shmobile: fix snprintf truncation
  fbdev: omap2: replace of_graph_get_next_endpoint()

Pull drm updates from Dave Airlie:
 "This is the main pull request for the drm subsystems for 6.10.

  In drivers the main thing is a new driver for ARM Mali firmware based
  GPUs, otherwise there are a lot of changes to amdgpu/xe/i915/msm and
  scattered changes to everything else.

  In the core a bunch of headers and Kconfig was refactored, along with
  the addition of a new panic handler which is meant to provide a user
  friendly message when a panic happens and graphical display is
  enabled.

  New drivers:
   - panthor: ARM Mali/Immortalis CSF-based GPU driver

  Core:
   - add a CONFIG_DRM_WERROR option
   - make more headers self-contained
   - grab resv lock in pin/unpin
   - fix vmap resv locking
   - EDID/eDP panel matching
   - Kconfig cleanups
   - DT sound bindings
   - Add SIZE_HINTS property for cursor planes
   - Add struct drm_edid_product_id and helpers.
   - Use drm device based logging in more drm functions.
   - drop seq_file.h from a bunch of places
   - use drm_edid driver conversions

  dp:
   - DP Tunnel documentation
   - MST read sideband cap
   - Adaptive sync SDP prep work

  ttm:
   - improve placement for TTM BOs in idle/busy handling

  panic:
   - Fixes for drm-panic, and option to test it.
   - Add drm panic to simpledrm, mgag200, imx, ast

  bridge:
   - improve init ordering
   - adv7511: allow GPIO pin sharing
   - tc358775: add tc358675 support

  panel:
   - AUO B120XAN01.0
   - Samsung s6e3fa7
   - BOE NT116WHM-N44
   - CMN N116BCA-EA1,
   - CrystalClear CMT430B19N00
   - Startek KD050HDFIA020-C020A
   - powertip PH128800T006-ZHC01
   - Innolux G121X1-L03
   - LG sw43408
   - Khadas TS050 V2
   - EDO RM69380 OLED
   - CSOT MNB601LS1-1

  amdgpu:
   - HDCP/ODM/RAS fixes
   - Devcoredump improvements
   - Expose VCN activity via sysfs
   - SMY 13.0.x updates
   - Enable fast updates on DCN 3.1.4
   - Add dclk and vclk reporting on additional devices
   - Add ACA RAS infrastructure
   - Implement TLB flush fence
   - EEPROM handling fixes
   - SMUIO 14.0.2 support
   - SMU 14.0.1 Updates
   - SMU 14.0.2 support
   - Sync page table freeing with TLB flushes
   - DML2 refactor
   - DC debug improvements
   - DCN 3.5.x Updates
   - GPU reset fixes
   - HDP fix for second GFX pipe on GC 10.x
   - Enable secondary GFX pipe on GC 10.3
   - Refactor and clean up BACO/BOCO/BAMACO handling
   - Remove invalid TTM resource start check
   - UAF fix in VA IOCTL
   - GPUVM page fault redirection to secondary IH rings for IH 6.x
   - Initial support for mapping kernel queues via MES
   - Fix VRAM memory accounting

  amdkfd:
   - MQD handling cleanup
   - Preemption handling fixes for XCDs
   - TLB flush fix for GC 9.4.2
   - Properly clean up workqueue during module unload
   - Fix memory leak process create failure
   - Range check CP bad op exception targets to avoid reporting invalid exceptions to userspace
   - Fix eviction fence handling
   - Fix leak in GPU memory allocation failure case
   - DMABuf import handling fix
   - Enable SQ watchpoint for gfx10

  i915:
   - Adding new DG2 PCI ID
   - add context hints for GT frequency
   - enable only one CCS for compute workloads
   - new workarounds
   - Fix UAF on destroy against retire race and remove two earlier partial fixes
   - Limit the reserved VM space to only the platforms that need it
   - Fix gt reset with GuC submission is disable
   - Add and use gt_to_guc() wrapper

  i915/xe display:
   - Lunar Lake display enabling, including cdclk and other refactors
   - BIOS/VBT/opregion related refactor
   - Digital port related refactor/clean-up
   - Fix 2s boot time regression on DP panel replay init
   - Remove duplication on audio enable/disable on SDVO and g4x+ DP
   - Disable AuxCCS framebuffers if built for Xe
   - Make crtc disable more atomic
   - Increase DP idle pattern wait timeout to 2ms
   - Start using container_of_const() for some extra const safety
   - Fix Jasper Lake boot freeze
   - Enable MST mode for 128b/132b single-stream sideband
   - Enable Adaptive Sync SDP Support for DP
   - Fix MTL supported DP rates - removal of UHBR13.5
   - PLL refactoring
   - Limit eDP MSO pipe only for display version 20
   - More display refactor towards independence from i915 dev_priv
   - Convert i915/xe fbdev to DRM client
   - More initial work to make display code more independent from i915

  xe:
   - improved error capture
   - clean up some uAPI leftovers
   - devcoredump update
   - Add BMG mocs table
   - Handle GSCCS ER interrupt
   - Implement xe2- and GuC workarounds
   - struct xe_device cleanup
   - Hwmon updates
   - Add LRC parsing for more GPU instruction
   - Increase VM_BIND number of per-ioctl Ops
   - drm/xe: Add XE_BO_GGTT_INVALIDATE flag
   - Initial development for SR-IOV support
   - Add new PCI IDs to DG2 platform
   - Move userptr over to start using hmm_range_fault

  msm:
   - Switched to generating register header files during build process
     instead of shipping pre-generated headers
   - Merged DPU and MDP4 format databases.
   - DP:
     - Stop using compat string to distinguish DP and eDP cases
     - Added support for X Elite platform (X1E80100)
     - Reworked DP aux/audio support
     - Added SM6350 DP to the bindings
   - GPU:
     - a7xx perfcntr reg fixes
     - MAINTAINERS updates
     - a750 devcoredump support

  radeon:
   - Silence UBSAN warnings related to flexible arrays

  nouveau:
   - move some uAPI objects to uapi headers

  omapdrm:
   - console fix

  ast:
   - add i2c polling

  qaic:
   - add debugfs entries

  exynos:
   - fix platform_driver .owner
   - drop cleanup code

  mediatek:
   - Use devm_platform_get_and_ioremap_resource() in mtk_hdmi_ddc_probe()
   - Add GAMMA 12-bit LUT support for MT8188
   - Rename mtk_drm_* to mtk_*
   - Drop driver owner initialization
   - Correct calculation formula of PHY Timing"

* tag 'drm-next-2024-05-15' of https://gitlab.freedesktop.org/drm/kernel: (1477 commits)
  drm/xe/ads: Use flexible-array
  drm/xe: Use ordered WQ for G2H handler
  drm/msm/gen_header: allow skipping the validation
  drm/msm/a6xx: Cleanup indexed regs const'ness
  drm/msm: Add devcoredump support for a750
  drm/msm: Adjust a7xx GBIF debugbus dumping
  drm/msm: Update a6xx registers XML
  drm/msm: Fix imported a750 snapshot header for upstream
  drm/msm: Import a750 snapshot registers from kgsl
  MAINTAINERS: Add Konrad Dybcio as a reviewer for the Adreno driver
  MAINTAINERS: Add a separate entry for Qualcomm Adreno GPU drivers
  drm/msm/a6xx: Avoid a nullptr dereference when speedbin setting fails
  drm/msm/adreno: fix CP cycles stat retrieval on a7xx
  drm/msm/a7xx: allow writing to CP_BV counter selection registers
  drm: zynqmp_dpsub: Always register bridge
  Revert "drm/bridge: ti-sn65dsi83: Fix enable error path"
  drm/fb_dma: Add checks in drm_fb_dma_get_scanout_buffer()
  drm/fbdev-generic: Do not set physical framebuffer address
  drm/panthor: Fix the FW reset logic
  drm/panthor: Make sure we handle 'unknown group state' case properly
  ...

Merge tag 'asymmetric-keys-next-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd

Pull asymmetric keys update from Jarkko Sakkinen:
 "Add a self-test testing PCKS#7 signed data against ECDSA key and
  couple of bug fixes for missing deps"

* tag 'asymmetric-keys-next-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
  certs: Add ECDSA signature verification self-test
  certs: Move RSA self-test data to separate file
  KEYS: asymmetric: Add missing dependencies of FIPS_SIGNATURE_SELFTEST
  KEYS: asymmetric: Add missing dependency on CRYPTO_SIG

Pull integrity updates from Mimi Zohar:
 "Two IMA changes, one EVM change, a use after free bug fix, and a code
  cleanup to address "-Wflex-array-member-not-at-end" warnings:

   - The existing IMA {ascii, binary}_runtime_measurements lists include
     a hard coded SHA1 hash. To address this limitation, define per TPM
     enabled hash algorithm {ascii, binary}_runtime_measurements lists

   - Close an IMA integrity init_module syscall measurement gap by
     defining a new critical-data record

   - Enable (partial) EVM support on stacked filesystems (overlayfs).
     Only EVM portable & immutable file signatures are copied up, since
     they do not contain filesystem specific metadata"

* tag 'integrity-v6.10' of ssh://ra.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
  ima: add crypto agility support for template-hash algorithm
  evm: Rename is_unsupported_fs to is_unsupported_hmac_fs
  fs: Rename SB_I_EVM_UNSUPPORTED to SB_I_EVM_HMAC_UNSUPPORTED
  evm: Enforce signatures on unsupported filesystem for EVM_INIT_X509
  ima: re-evaluate file integrity on file metadata change
  evm: Store and detect metadata inode attributes changes
  ima: Move file-change detection variables into new structure
  evm: Use the metadata inode to calculate metadata hash
  evm: Implement per signature type decision in security_inode_copy_up_xattr
  security: allow finer granularity in permitting copy-up of security xattrs
  ima: Rename backing_inode to real_inode
  integrity: Avoid -Wflex-array-member-not-at-end warnings
  ima: define an init_module critical data record
  ima: Fix use-after-free on a dentry's dname.name

Pull selinux updates from Paul Moore:

 - Attempt to pre-allocate the SELinux status page so it doesn't appear
   to userspace that we are skipping SELinux policy sequence numbers

 - Reject invalid SELinux policy bitmaps with an error at policy load
   time

 - Consistently use the same type, u32, for ebitmap offsets

 - Improve the "symhash" hash function for better distribution on common
   policies

 - Correct a number of printk format specifiers in the ebitmap code

 - Improved error checking in sel_write_load()

 - Ensure we have a proper return code in the
   filename_trans_read_helper_compat() function

 - Make better use of the current_sid() helper function

 - Allow for more hash table statistics when debugging is enabled

 - Migrate from printk_ratelimit() to pr_warn_ratelimited()

 - Miscellaneous cleanups and tweaks to selinux_lsm_getattr()

 - More consitification work in the conditional policy space

* tag 'selinux-pr-20240513' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  selinux: constify source policy in cond_policydb_dup()
  selinux: avoid printk_ratelimit()
  selinux: pre-allocate the status page
  selinux: clarify return code in filename_trans_read_helper_compat()
  selinux: use u32 as bit position type in ebitmap code
  selinux: improve symtab string hashing
  selinux: dump statistics for more hash tables
  selinux: make more use of current_sid()
  selinux: update numeric format specifiers for ebitmaps
  selinux: improve error checking in sel_write_load()
  selinux: cleanup selinux_lsm_getattr()
  selinux: reject invalid ebitmaps

Pull lsm updates from Paul Moore:

 - The security/* portion of the effort to remove the empty sentinel
   elements at the end of the ctl_table arrays

 - Update the file list associated with the LSM / "SECURITY SUBSYSTEM"
   entry in the MAINTAINERS file (and then fix a typo in then update)

* tag 'lsm-pr-20240513' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
  MAINTAINERS: repair file entry in SECURITY SUBSYSTEM
  MAINTAINERS: update the LSM file list
  lsm: remove the now superfluous sentinel element from ctl_table array

Pull networking updates from Jakub Kicinski:
 "Core & protocols:

   - Complete rework of garbage collection of AF_UNIX sockets.

     AF_UNIX is prone to forming reference count cycles due to fd
     passing functionality. New method based on Tarjan's Strongly
     Connected Components algorithm should be both faster and remove a
     lot of workarounds we accumulated over the years.

   - Add TCP fraglist GRO support, allowing chaining multiple TCP
     packets and forwarding them together. Useful for small switches /
     routers which lack basic checksum offload in some scenarios (e.g.
     PPPoE).

   - Support using SMP threads for handling packet backlog i.e. packet
     processing from software interfaces and old drivers which don't use
     NAPI. This helps move the processing out of the softirq jumble.

   - Continue work of converting from rtnl lock to RCU protection.

     Don't require rtnl lock when reading: IPv6 routing FIB, IPv6
     address labels, netdev threaded NAPI sysfs files, bonding driver's
     sysfs files, MPLS devconf, IPv4 FIB rules, netns IDs, tcp metrics,
     TC Qdiscs, neighbor entries, ARP entries via ioctl(SIOCGARP), a lot
     of the link information available via rtnetlink.

   - Small optimizations from Eric to UDP wake up handling, memory
     accounting, RPS/RFS implementation, TCP packet sizing etc.

   - Allow direct page recycling in the bulk API used by XDP, for +2%
     PPS.

   - Support peek with an offset on TCP sockets.

   - Add MPTCP APIs for querying last time packets were received/sent/acked
     and whether MPTCP "upgrade" succeeded on a TCP socket.

   - Add intra-node communication shortcut to improve SMC performance.

   - Add IPv6 (and IPv{4,6}-over-IPv{4,6}) support to the GTP protocol
     driver.

   - Add HSR-SAN (RedBOX) mode of operation to the HSR protocol driver.

   - Add reset reasons for tracing what caused a TCP reset to be sent.

   - Introduce direction attribute for xfrm (IPSec) states. State can be
     used either for input or output packet processing.

  Things we sprinkled into general kernel code:

   - Add bitmap_{read,write}(), bitmap_size(), expose BYTES_TO_BITS().

     This required touch-ups and renaming of a few existing users.

   - Add Endian-dependent __counted_by_{le,be} annotations.

   - Make building selftests "quieter" by printing summaries like
     "CC object.o" rather than full commands with all the arguments.

  Netfilter:

   - Use GFP_KERNEL to clone elements, to deal better with OOM
     situations and avoid failures in the .commit step.

  BPF:

   - Add eBPF JIT for ARCv2 CPUs.

   - Support attaching kprobe BPF programs through kprobe_multi link in
     a session mode, meaning, a BPF program is attached to both function
     entry and return, the entry program can decide if the return
     program gets executed and the entry program can share u64 cookie
     value with return program. "Session mode" is a common use-case for
     tetragon and bpftrace.

   - Add the ability to specify and retrieve BPF cookie for raw
     tracepoint programs in order to ease migration from classic to raw
     tracepoints.

   - Add an internal-only BPF per-CPU instruction for resolving per-CPU
     memory addresses and implement support in x86, ARM64 and RISC-V
     JITs. This allows inlining functions which need to access per-CPU
     state.

   - Optimize x86 BPF JIT's emit_mov_imm64, and add support for various
     atomics in bpf_arena which can be JITed as a single x86
     instruction. Support BPF arena on ARM64.

   - Add a new bpf_wq API for deferring events and refactor
     process-context bpf_timer code to keep common code where possible.

   - Harden the BPF verifier's and/or/xor value tracking.

   - Introduce crypto kfuncs to let BPF programs call kernel crypto
     APIs.

   - Support bpf_tail_call_static() helper for BPF programs with GCC 13.

   - Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF
     program to have code sections where preemption is disabled.

  Driver API:

   - Skip software TC processing completely if all installed rules are
     marked as HW-only, instead of checking the HW-only flag rule by
     rule.

   - Add support for configuring PoE (Power over Ethernet), similar to
     the already existing support for PoDL (Power over Data Line)
     config.

   - Initial bits of a queue control API, for now allowing a single
     queue to be reset without disturbing packet flow to other queues.

   - Common (ethtool) statistics for hardware timestamping.

  Tests and tooling:

   - Remove the need to create a config file to run the net forwarding
     tests so that a naive "make run_tests" can exercise them.

   - Define a method of writing tests which require an external endpoint
     to communicate with (to send/receive data towards the test
     machine). Add a few such tests.

   - Create a shared code library for writing Python tests. Expose the
     YAML Netlink library from tools/ to the tests for easy Netlink
     access.

   - Move netfilter tests under net/, extend them, separate performance
     tests from correctness tests, and iron out issues found by running
     them "on every commit".

   - Refactor BPF selftests to use common network helpers.

   - Further work filling in YAML definitions of Netlink messages for:
     nftables, team driver, bonding interfaces, vlan interfaces, VF
     info, TC u32 mark, TC police action.

   - Teach Python YAML Netlink to decode attribute policies.

   - Extend the definition of the "indexed array" construct in the specs
     to cover arrays of scalars rather than just nests.

   - Add hyperlinks between definitions in generated Netlink docs.

  Drivers:

   - Make sure unsupported flower control flags are rejected by drivers,
     and make more drivers report errors directly to the application
     rather than dmesg (large number of driver changes from Asbjørn
     Sloth Tønnesen).

   - Ethernet high-speed NICs:
      - Broadcom (bnxt):
         - support multiple RSS contexts and steering traffic to them
         - support XDP metadata
         - make page pool allocations more NUMA aware
      - Intel (100G, ice, idpf):
         - extract datapath code common among Intel drivers into a library
         - use fewer resources in switchdev by sharing queues with the PF
         - add PFCP filter support
         - add Ethernet filter support
         - use a spinlock instead of HW lock in PTP clock ops
         - support 5 layer Tx scheduler topology
      - nVidia/Mellanox:
         - 800G link modes and 100G SerDes speeds
         - per-queue IRQ coalescing configuration
      - Marvell Octeon:
         - support offloading TC packet mark action

   - Ethernet NICs consumer, embedded and virtual:
      - stop lying about skb->truesize in USB Ethernet drivers, it
        messes up TCP memory calculations
      - Google cloud vNIC:
         - support changing ring size via ethtool
         - support ring reset using the queue control API
      - VirtIO net:
         - expose flow hash from RSS to XDP
         - per-queue statistics
         - add selftests
      - Synopsys (stmmac):
         - support controllers which require an RX clock signal from the
           MII bus to perform their hardware initialization
      - TI:
         - icssg_prueth: support ICSSG-based Ethernet on AM65x SR1.0 devices
         - icssg_prueth: add SW TX / RX Coalescing based on hrtimers
         - cpsw: minimal XDP support
      - Renesas (ravb):
         - support describing the MDIO bus
      - Realtek (r8169):
         - add support for RTL8168M
      - Microchip Sparx5:
         - matchall and flower actions mirred and redirect

   - Ethernet switches:
      - nVidia/Mellanox:
         - improve events processing performance
      - Marvell:
         - add support for MV88E6250 family internal PHYs
      - Microchip:
         - add DCB and DSCP mapping support for KSZ switches
         - vsc73xx: convert to PHYLINK
      - Realtek:
         - rtl8226b/rtl8221b: add C45 instances and SerDes switching

   - Many driver changes related to PHYLIB and PHYLINK deprecated API
     cleanup

   - Ethernet PHYs:
      - Add a new driver for Airoha EN8811H 2.5 Gigabit PHY.
      - micrel: lan8814: add support for PPS out and external timestamp trigger

   - WiFi:
      - Disable Wireless Extensions (WEXT) in all Wi-Fi 7 devices
        drivers. Modern devices can only be configured using nl80211.
      - mac80211/cfg80211
         - handle color change per link for WiFi 7 Multi-Link Operation
      - Intel (iwlwifi):
         - don't support puncturing in 5 GHz
         - support monitor mode on passive channels
         - BZ-W device support
         - P2P with HE/EHT support
         - re-add support for firmware API 90
         - provide channel survey information for Automatic Channel Selection
      - MediaTek (mt76):
         - mt7921 LED control
         - mt7925 EHT radiotap support
         - mt7920e PCI support
      - Qualcomm (ath11k):
         - P2P support for QCA6390, WCN6855 and QCA2066
         - support hibernation
         - ieee80211-freq-limit Device Tree property support
      - Qualcomm (ath12k):
         - refactoring in preparation of multi-link support
         - suspend and hibernation support
         - ACPI support
         - debugfs support, including dfs_simulate_radar support
      - RealTek:
         - rtw88: RTL8723CS SDIO device support
         - rtw89: RTL8922AE Wi-Fi 7 PCI device support
         - rtw89: complete features of new WiFi 7 chip 8922AE including
           BT-coexistence and Wake-on-WLAN
         - rtw89: use BIOS ACPI settings to set TX power and channels
         - rtl8xxxu: enable Management Frame Protection (MFP) support

   - Bluetooth:
      - support for Intel BlazarI and Filmore Peak2 (BE201)
      - support for MediaTek MT7921S SDIO
      - initial support for Intel PCIe BT driver
      - remove HCI_AMP support"

* tag 'net-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1827 commits)
  selftests: netfilter: fix packetdrill conntrack testcase
  net: gro: fix napi_gro_cb zeroed alignment
  Bluetooth: btintel_pcie: Refactor and code cleanup
  Bluetooth: btintel_pcie: Fix warning reported by sparse
  Bluetooth: hci_core: Fix not handling hdev->le_num_of_adv_sets=1
  Bluetooth: btintel: Fix compiler warning for multi_v7_defconfig config
  Bluetooth: btintel_pcie: Fix compiler warnings
  Bluetooth: btintel_pcie: Add *setup* function to download firmware
  Bluetooth: btintel_pcie: Add support for PCIe transport
  Bluetooth: btintel: Export few static functions
  Bluetooth: HCI: Remove HCI_AMP support
  Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init()
  Bluetooth: qca: Fix error code in qca_read_fw_build_info()
  Bluetooth: hci_conn: Use __counted_by() and avoid -Wfamnae warning
  Bluetooth: btintel: Add support for Filmore Peak2 (BE201)
  Bluetooth: btintel: Add support for BlazarI
  LE Create Connection command timeout increased to 20 secs
  dt-bindings: net: bluetooth: Add MediaTek MT7921S SDIO Bluetooth
  Bluetooth: compute LE flow credits based on recvbuf space
  Bluetooth: hci_sync: Use cmd->num_cis instead of magic number
  ...

Merge tag 'firewire-updates-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394

Pull firewire updates from Takashi Sakamoto:
 "During the development period of v6.8 kernel, it became evident that
  there was a lack of helper utilities to trace the initial state of
  bus, while investigating certain PHYs compliant with different
  versions of IEEE 1394 specification.

  This series of changes includes the addition of tracepoints events,
  provided by 'firewire' subsystem. These events enable tracing of how
  firewire core functions during bus reset and asynchronous
  communication over IEEE 1394 bus.

  When implementing the tracepoints events, it was found that the
  existing serialization and deserialization helpers for several types
  of asynchronous packets are scattered across both firewire-core and
  firewire-ohci kernel modules. A set of inline functions is newly added
  to address it, along with some KUnit tests, serving as the foundation
  for the tracepoints events. This renders the dispersed code obsolete.

  The remaining changes constitute the final steps in phasing out the
  usage of deprecated PCI MSI APIs, in continuation from the previous
  version"

* tag 'firewire-updates-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: (29 commits)
  firewire: obsolete usage of *-objs in Makefile for KUnit test
  firewire: core: remove flag and width from u64 formats of tracepoints events
  firewire: core: fix type of timestamp for async_inbound_template tracepoints events
  firewire: core: add tracepoint event for handling bus reset
  Revert "firewire: core: option to log bus reset initiation"
  firewire: core: add tracepoints events for initiating bus reset
  firewire: ohci: obsolete OHCI_PARAM_DEBUG_BUSRESETS from debug module parameter
  firewire: ohci: add bus-reset event for initial set of handled irq
  firewire: core: add tracepoints event for asynchronous inbound phy packet
  firewire: core/cdev: add tracepoints events for asynchronous phy packet
  firewire: core: add tracepoints events for asynchronous outbound response
  firewire: core: add tracepoint event for asynchronous inbound request
  firewire: core: add tracepoints event for asynchronous inbound response
  firewire: core: add tracepoints events for asynchronous outbound request
  firewire: core: add support for Linux kernel tracepoints
  firewire: core: replace local macros with common inline functions for isochronous packet header
  firewire: core: add common macro to serialize/deserialize isochronous packet header
  firewire: core: obsolete tcode check macros with inline functions
  firewire: ohci: replace hard-coded values with common macros
  firewire: ohci: replace hard-coded values with inline functions for asynchronous packet header
  ...

Merge tag 'for-6.10/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper updates from Mike Snitzer:

 - Add a dm-crypt optional "high_priority" flag that enables the crypt
   workqueues to use WQ_HIGHPRI.

 - Export dm-crypt workqueues via sysfs (by enabling WQ_SYSFS) to allow
   for improved visibility and controls over IO and crypt workqueues.

 - Fix dm-crypt to no longer constrain max_segment_size to PAGE_SIZE.
   This limit isn't needed given that the block core provides late bio
   splitting if bio exceeds underlying limits (e.g. max_segment_size).

 - Fix dm-crypt crypt_queue's use of WQ_UNBOUND to not use
   WQ_CPU_INTENSIVE because it is meaningless with WQ_UNBOUND.

 - Fix various issues with dm-delay target (ranging from a resource
   teardown fix, a fix for hung task when using kthread mode, and other
   improvements that followed from code inspection).

* tag 'for-6.10/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm-delay: remove timer_lock
  dm-delay: change locking to avoid contention
  dm-delay: fix max_delay calculations
  dm-delay: fix hung task introduced by kthread mode
  dm-delay: fix workqueue delay_timer race
  dm-crypt: don't set WQ_CPU_INTENSIVE for WQ_UNBOUND crypt_queue
  dm: use queue_limits_set
  dm-crypt: stop constraining max_segment_size to PAGE_SIZE
  dm-crypt: export sysfs of all workqueues
  dm-crypt: add the optional "high_priority" flag

Pull SCSI updates from James Bottomley:
 "Updates to the usual drivers (ufs, lpfc, qla2xxx, mpi3mr, libsas).

  The major update (which causes a conflict with block, see below) is
  Christoph removing the queue limits and their associated block
  helpers.

  The remaining patches are assorted minor fixes and deprecated function
  updates plus a bit of constification"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (141 commits)
  scsi: mpi3mr: Sanitise num_phys
  scsi: lpfc: Copyright updates for 14.4.0.2 patches
  scsi: lpfc: Update lpfc version to 14.4.0.2
  scsi: lpfc: Add support for 32 byte CDBs
  scsi: lpfc: Change lpfc_hba hba_flag member into a bitmask
  scsi: lpfc: Introduce rrq_list_lock to protect active_rrq_list
  scsi: lpfc: Clear deferred RSCN processing flag when driver is unloading
  scsi: lpfc: Update logging of protection type for T10 DIF I/O
  scsi: lpfc: Change default logging level for unsolicited CT MIB commands
  scsi: target: Remove unused list 'device_list'
  scsi: iscsi: Remove unused list 'connlist_err'
  scsi: ufs: exynos: Add support for Tensor gs101 SoC
  scsi: ufs: exynos: Add some pa_dbg_ register offsets into drvdata
  scsi: ufs: exynos: Allow max frequencies up to 267Mhz
  scsi: ufs: exynos: Add EXYNOS_UFS_OPT_TIMER_TICK_SELECT option
  scsi: ufs: exynos: Add EXYNOS_UFS_OPT_UFSPR_SECURE option
  scsi: ufs: dt-bindings: exynos: Add gs101 compatible
  scsi: qla2xxx: Fix debugfs output for fw_resource_count
  scsi: qedf: Ensure the copied buf is NUL terminated
  scsi: bfa: Ensure the copied buf is NUL terminated
  ...

Pull ata updates from Damien Le Moal:

 - Convert the bindings for the imx-pata and ahci-da850 drivers to DT
   schemas (from Animesh)

 - Correct the code to handle HAS_IOPORT dependencies and conditionally
   compile drivers as needed (from Niklas)

 - Correct the legacy_exit() function in the pata_legacy driver to
   properly handle cleanups on driver exit (from Sergey)

 - Small code simplification removing the ata_exec_internal_sg()
   function and folding it into its only caller (from me)

* tag 'ata-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
  ata: pata_legacy: make legacy_exit() work again
  ata: libata-core: Remove ata_exec_internal_sg()
  ata: add HAS_IOPORT dependencies
  dt-bindings: ata: ahci-da850: Convert to dtschema
  dt-bindings: ata: imx-pata: Convert to dtschema

Pull fsverity update from Eric Biggers:
 "Fix a false positive kmemleak warning"

* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux:
  fsverity: use register_sysctl_init() to avoid kmemleak warning

Pull fscrypt update from Eric Biggers:
 "Improve the performance of opening unencrypted files on filesystems
  that support fscrypt"

* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux:
  fscrypt: try to avoid refing parent dentry in fscrypt_file_open

Pull orangefs update from Mike Marshall:
 "Fix out-of-bounds fsid access.

  Small fix to quiet warnings from string fortification helpers,
  suggested by Arnd Bergmann"

* tag 'for-linus-6.10-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux:
  orangefs: fix out-of-bounds fsid access

Pull gfs2 updates from Andreas Gruenbacher:

 - Properly fix the glock shrinker this time: it broke in commit "gfs2:
   Make glock lru list scanning safer" and commit "gfs2: fix glock
   shrinker ref issues" wasn't actually enough to fix it

 - On unmount, keep glocks around long enough that no more dlm callbacks
   can occur on them

 - Some more folio conversion patches from Matthew Wilcox

 - Lots of other smaller fixes and cleanups

* tag 'gfs2-for-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: (27 commits)
  gfs2: make timeout values more explicit
  gfs2: Convert gfs2_aspace_writepage() to use a folio
  gfs2: Add a migrate_folio operation for journalled files
  gfs2: Simplify gfs2_read_super
  gfs2: Convert gfs2_page_mkwrite() to use a folio
  gfs2: gfs2_freeze_unlock cleanup
  gfs2: Remove and replace gfs2_glock_queue_work
  gfs2: do_xmote fixes
  gfs2: finish_xmote cleanup
  gfs2: Unlock fewer glocks on unmount
  gfs2: Fix potential glock use-after-free on unmount
  gfs2: Remove ill-placed consistency check
  gfs2: Fix lru_count accounting
  gfs2: Fix "Make glock lru list scanning safer"
  Revert "gfs2: fix glock shrinker ref issues"
  gfs2: Fix "ignore unlock failures after withdraw"
  gfs2: Get rid of unnecessary test_and_set_bit
  gfs2: Don't set GLF_LOCK in gfs2_dispose_glock_lru
  gfs2: Replace gfs2_glock_queue_put with gfs2_glock_put_async
  gfs2: Get rid of gfs2_glock_queue_put in signal_our_withdraw
  ...

Pull dlm updates from David Teigland:
 "This set includes some small fixes, and some big internal changes:

   - Fix a long standing race between the unlock callback for the last
     lkb struct, and removing the rsb that became unused after the final
     unlock. This could lead different nodes to inconsistent info about
     the rsb master node.

   - Remove unnecessary refcounting on callback structs, returning to
     the way things were done in the past.

   - Do message processing in softirq context. This allows dlm messages
     to be cleared more quickly and efficiently, reducing long lists of
     incomplete requests. A future change to run callbacks directly from
     this context will make this more effective.

   - The softirq message processing involved a number of patches
     changing mutexes to spinlocks and rwlocks, and a fair amount of
     code re-org in preparation.

   - Use an rhashtable for rsb structs, rather than our old internal
     hash table implementation. This also required some re-org of lists
     and locks preparation for the change.

   - Drop the dlm_scand kthread, and use timers to clear unused rsb
     structs. Scanning all rsb's periodically was a lot of wasted work.

   - Fix recent regression in logic for copying LVB data in user space
     lock requests"

* tag 'dlm-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm: (34 commits)
  dlm: return -ENOMEM if ls_recover_buf fails
  dlm: fix sleep in atomic context
  dlm: use rwlock for lkbidr
  dlm: use rwlock for rsb hash table
  dlm: drop dlm_scand kthread and use timers
  dlm: do not use ref counts for rsb in the toss state
  dlm: switch to use rhashtable for rsbs
  dlm: add rsb lists for iteration
  dlm: merge toss and keep hash table lists into one list
  dlm: change to single hashtable lock
  dlm: increment ls_count for dlm_scand
  dlm: do message processing in softirq context
  dlm: use spin_lock_bh for message processing
  dlm: remove schedule in receive path
  dlm: convert ls_recv_active from rw_semaphore to rwlock
  dlm: avoid blocking receive at the end of recovery
  dlm: convert res_lock to spinlock
  dlm: convert ls_waiters_mutex to spinlock
  dlm: drop mutex use in waiters recovery
  dlm: add new struct to save position in dlm_copy_master_names
  ...

Pull btrfs updates from David Sterba:
 "This update brings a few minor performance improvements, otherwise
  there's a lot of refactoring, cleanups and other sort of not user
  visible changes.

  Performance improvements:

   - inline b-tree locking functions, improvement in metadata-heavy
     changes

   - relax locking on a range that's being reflinked, allows read
     operations to run in parallel

   - speed up NOCOW write checks (throughput +9% on a sample test)

   - extent locking ranges have been reduced in several places, namely
     around delayed ref processing

  Core:

   - more page to folio conversions:
      - relocation
      - send
      - compression
      - inline extent handling
      - super block write and wait

   - extent_map structure optimizations:
      - reduced structure size
      - code simplifications
      - add shrinker for allocated objects, the numbers can go high and
        could exhaust memory on smaller systems (reported) as they may
        not get an opportunity to be freed fast enough

   - extent locking optimizations:
      - reduce locking ranges where it does not seem to be necessary and
        are safe due to other means of synchronization
      - potential improvements due to lower contention,
        allocation/freeing and state management operations of extent
        state tracking structures

   - delayed ref cleanups and simplifications

   - updated trace points

   - improved error handling, warnings and assertions

   - cleanups and refactoring, unification of error handling paths"

* tag 'for-6.10-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (122 commits)
  btrfs: qgroup: fix initialization of auto inherit array
  btrfs: count super block write errors in device instead of tracking folio error state
  btrfs: use the folio iterator in btrfs_end_super_write()
  btrfs: convert super block writes to folio in write_dev_supers()
  btrfs: convert super block writes to folio in wait_dev_supers()
  bio: Export bio_add_folio_nofail to modules
  btrfs: remove duplicate included header from fs.h
  btrfs: add a cached state to extent_clear_unlock_delalloc
  btrfs: push extent lock down in submit_one_async_extent
  btrfs: push lock_extent down in cow_file_range()
  btrfs: move can_cow_file_range_inline() outside of the extent lock
  btrfs: push lock_extent into cow_file_range_inline
  btrfs: push extent lock into cow_file_range
  btrfs: push extent lock into run_delalloc_cow
  btrfs: remove unlock_extent from run_delalloc_compressed
  btrfs: push extent lock down in run_delalloc_nocow
  btrfs: adjust while loop condition in run_delalloc_nocow
  btrfs: push extent lock into run_delalloc_nocow
  btrfs: push the extent lock into btrfs_run_delalloc_range
  btrfs: lock extent when doing inline extent in compression
  ...

Pull erofs updates from Gao Xiang:
 "The LZ4 global buffer count is now configurable instead of the
  previous per-CPU buffers, which is useful for bare metals with
  hundreds of CPUs. A reserved buffer pool for LZ4 decompression can
  also be enabled to minimize the tail allocation latencies under the
  low memory scenarios with heavy memory pressure.

  In addition, Zstandard algorithm is now supported as an alternative
  since it has been requested by users for a while.

  There are some random cleanups as usual.

  Summary:

   - Make LZ4 global buffers configurable instead of per-CPU buffers

   - Add a reserved buffer pool for LZ4 decompression for lower latencies

   - Support Zstandard compression algorithm as an alternative

   - Derive fsid from on-disk UUID for .statfs() if possible

   - Minor cleanups"

* tag 'erofs-for-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
  erofs: Zstandard compression support
  erofs: clean up z_erofs_load_full_lcluster()
  erofs: derive fsid from on-disk UUID for .statfs() if possible
  erofs: add a reserved buffer pool for lz4 decompression
  erofs: do not use pagepool in z_erofs_gbuf_growsize()
  erofs: rename per-CPU buffers to global buffer pool and make it configurable
  erofs: rename utils.c to zutil.c

Write through mode is for cache=none, not for default (when
caching is allowed if we have a lease). Some tests were running
much, much more slowly as a result of disabling caching of
writes by default.
Reviewed-by: David Howells <dhowells@redhat.com>
Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de>
Fixes: 3ee1a1fc ("cifs: Cut over to using netfslib")
Signed-off-by: Steve French <stfrench@microsoft.com>

Pull EFI updates from Ard Biesheuvel:
 "Only a handful of changes this cycle, consisting of cleanup work and a
  low-prio bugfix:

   - Additional cleanup by Tim for the efivarfs variable name length
     confusion

   - Avoid freeing a bogus pointer when virtual remapping is omitted in
     the EFI boot stub"

* tag 'efi-next-for-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
  efi: libstub: only free priv.runtime_map when allocated
  efi: Clear up misconceptions about a maximum variable name size
  efivarfs: Remove unused internal struct members
  Documentation: Mark the 'efivars' sysfs interface as removed
  efi: pstore: Request at most 512 bytes for variable names

Pull HID updates from Jiri Kosina:

 - Firmware loading from host support in intel-ish driver, needed to
   support Lunar Lake and later (Zhang Lixu)

 - updates to HID-BPF infrastructure, with some of the specific fixes
   (e.g. rdesc fixups) abstracted into separate BPF programs for
   consumption from libevdev/udev-hid-bpf (Benjamin Tissoires)

 - support for Deck IMU in hid-steam (Max Maisel)

 - fixes for better support of 3rd party playstation DS4 controllers
   (Max Staudt)

 - support for missing mappings and codes from HUT 1.5 in hid-debug
   (Thomas Kuehne)

 - initial support for ROG Ally and ROG X13 devices (Luke D. Jones)

 - full support for WinWing Orion2 (Ivan Gorinov)

* tag 'hid-for-linus-2024051401' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (74 commits)
  selftests/hid: skip tests with HID-BPF if udev-hid-bpf is not installed
  selftests/hid: add tests for the Raptor Mach 2 joystick
  selftests/hid: move the gamepads definitions in the test file
  selftests/hid: import base_gamepad.py from hid-tools
  selftests/hid: add Huion Kamvas Pro 19 tests
  selftests/hid: tablets: also check for XP-Pen offset correction
  selftests/hid: tablets: add a couple of XP-PEN tablets
  selftests/hid: tablets: reduce the number of pen state
  selftests/hid: add support for HID-BPF pre-loading before starting a test
  selftests/hid: import base_device.py from hid-tools
  HID: bpf: add in-tree HID-BPF fix for the Raptor Mach 2
  HID: bpf: add in-tree HID-BPF fix for the Huion Kamvas Pro 19
  HID: bpf: add in-tree HID-BPF fix for the XBox Elite 2 over Bluetooth
  HID: bpf: add in-tree HID-BPF fix for the Wacom ArtPen
  HID: bpf: add in-tree HID-BPF fix for the IOGear Kaliber Gaming MMOmentum mouse
  HID: bpf: add in-tree HID-BPF fix for the HP Elite Presenter Mouse
  HID: bpf: add in-tree HID-BPF fix for the XPPen Artist 16
  HID: bpf: add first in-tree HID-BPF fix for the XPPen Artist 24
  HID: do not assume HAT Switch logical max < 8
  HID: amd_sfh: Use amd_get_c2p_val() to read C2P register
  ...