- 01 Dec, 2018 40 commits
-
-
Arvind Yadav authored
[ Upstream commit 94aef061 ] usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Benjamin Valentin authored
[ Upstream commit be19788c ] XBCD [0][1] is an OpenSource driver for Xbox controllers on Windows. Later it also started supporting Xbox360 controllers (presumably before the official Windows driver was released). It contains a couple device IDs unknown to the Linux driver, so I extracted those from xbcd.inf and added them to our list. It has a special type for Wheels and I have the feeling they might need some extra handling. They all have 'Wheel' in their name, so that information is available for future improvements. [0] https://www.s-config.com/xbcd-original-xbox-controllers-win10/ [1] http://www.redcl0ud.com/xbcd.htmlReviewed-by:
Cameron Gutman <aicommander@gmail.com> Signed-off-by:
Benjamin Valentin <benpicco@googlemail.com> Signed-off-by:
-
Benjamin Valentin authored
[ Upstream commit c225370e ] 360Controller [0] is an OpenSource driver for Xbox/Xbox360/XboxOne controllers on macOS. It contains a couple device IDs unknown to the Linux driver, so I wrote a small Python script [1] to extract them and feed them into my previous script [2] to compare them with the IDs known to Linux. For most devices, this information is not really needed as xpad is able to automatically detect the type of an unknown Xbox Controller at run-time. I've therefore stripped all the generic/vague entries. I've excluded the Logitech G920, it's handled by a HID driver already. I've also excluded the Scene It! Big Button IR, it's handled by an out-of-tree driver. [3] [0] https://github.com/360Controller/360Controller [1] http://codepad.org/v9GyLKMq [2] http://codepad.org/qh7jclpD [3] https://github.com/micolous/xbox360bbReviewed-by:
-
Benjamin Valentin authored
[ Upstream commit 4706aa07 ] Add USB IDs for two more Xbox 360 controllers. I found them in the pull requests for the xboxdrv userspace driver, which seems abandoned. Thanks to psychogony and mkaito for reporting the IDs there! Signed-off-by:
-
Benjamin Valentin authored
[ Upstream commit 44bc7225 ] The userspace xboxdrv driver [0] contains some USB IDs unknown to the kernel driver. I have created a simple script [1] to extract the missing devices and add them to xpad. A quick google search confirmed that all the new devices called Fightstick/pad are Arcade-type devices [2] where the MAP_TRIGGERS_TO_BUTTONS option should apply. There are some similar devices in the existing device table where this flag is not set, but I did refrain from changing those. [0] https://github.com/xboxdrv/xboxdrv/blob/stable/src/xpad_device.cpp [1] http://codepad.org/CHV98BNH [2] https://www.google.com/search?q=SFxT+Fightstick+Pro&tbm=ischSigned-off-by:
-
Benjamin Valentin authored
[ Upstream commit 873cb582 ] Some entries in the table of supported devices are out of order. To not create a mess when adding new ones using a script, sort them first. Signed-off-by:
-
Cameron Gutman authored
[ Upstream commit 81093c98 ] There are several quirky Xbox One pads that depend on initialization packets that the Microsoft pads don't require. To deal with these, I've added a mechanism for issuing device-specific initialization packets using a VID/PID-based quirks list. For the initial set of init quirks, I have added quirk handling from Valve's Steam Link xpad driver[0] and the 360Controller project[1] for macOS to enable some new pads to work properly. This should enable full functionality on the following quirky pads: 0x0e6f:0x0165 - Titanfall 2 gamepad (previously fully non-functional) 0x0f0d:0x0067 - Hori Horipad (analog sticks previously non-functional) 0x24c6:0x541a - PowerA Xbox One pad (previously fully non-functional) 0x24c6:0x542a - PowerA Xbox One pad (previously fully non-functional) 0x24c6:0x543a - PowerA Xbox One pad (previously fully non-functional) [0]: https://github.com/ValveSoftware/steamlink-sdk/blob/master/kernel/drivers/input/joystick/xpad.c [1]: https://github.com/360Controller/360ControllerSigned-off-by:
-
Cameron Gutman authored
[ Upstream commit a1fbf5bb ] Set the LED_CORE_SUSPENDRESUME flag on our LED device so the LED state will be automatically restored by LED core on resume. Since Xbox One pads stop flashing only when reinitialized, we'll send them the initialization packet so they calm down too. Signed-off-by:
-
Cameron Gutman authored
[ Upstream commit 57b8443d ] The Xbox One S requires an ack to its mode button report, otherwise it continuously retransmits the report. This makes the mode button appear to be stuck down after it is pressed for the first time. Signed-off-by:
-
Cameron Gutman authored
[ Upstream commit c01b5e74 ] The order of endpoints is well defined on official Xbox pads, but we have found at least one 3rd-party pad that doesn't follow the standard ("Titanfall 2 Xbox One controller" 0e6f:0165). Fortunately, we get lucky with this specific pad because it uses endpoint addresses that differ only by direction. We know that there are other pads out where this is not true, so let's go ahead and fix this. Signed-off-by:
-
Pavel Rojtberg authored
[ Upstream commit a8c34e27 ] Replace first goto with simple returns as we really are just returning one error code. Signed-off-by:
Pavel Rojtberg <rojtberg@gmail.com> Signed-off-by:
-
Daniel Tobias authored
[ Upstream commit 4f88476c ] xbox one was the only device that has a *_process_buttons routine. Signed-off-by:
-
Daniel Tobias authored
[ Upstream commit c02fc1d9 ] Signed-off-by:
Daniel Tobias <dan.g.tob@gmail.com> Signed-off-by:
-
Cameron Gutman authored
[ Upstream commit ae3b4469 ] Unlike previous Xbox pads, the Xbox One pad doesn't have "sticky" rumble packets. The duration is encoded into the command and expiration is handled by the pad firmware. ff-memless needs pseudo-sticky behavior for rumble effects to behave properly for long duration effects. We already specify the maximum rumble on duration in the command packets, but it's still only good for about 2.5 seconds of rumble. This is easily reproducible running fftest's sine vibration test. It turns out there's a repeat count encoded in the rumble command. We can abuse that to get the pseudo-sticky behavior needed for rumble to behave as expected for effects with long duration. By my math, this change should allow a single ff_effect to rumble for 10 minutes straight, which should be more than enough for most needs. Signed-off-by:
-
Cameron Gutman authored
[ Upstream commit 599b8c09 ] This is the new gamepad that ships with the Xbox One S which includes Bluetooth functionality. Signed-off-by:
-
Vasanthakumar Thiagarajan authored
commit ebaa4b16 upstream. arvifs list is traversed within data_lock spin_lock in tasklet context to fill channel information from the corresponding vif. This means any access to arvifs list for add/del operations should also be protected with the same spin_lock to avoid the race. Fix this by performing list add/del on arvfis within the data_lock. This could fix kernel panic something like the below. LR is at ath10k_htt_rx_pktlog_completion_handler+0x100/0xb6c [ath10k_core] PC is at ath10k_htt_rx_pktlog_completion_handler+0x1c0/0xb6c [ath10k_core] Internal error: Oops: 17 [#1] PREEMPT SMP ARM [<bf4857f4>] (ath10k_htt_rx_pktlog_completion_handler+0x2f4/0xb6c [ath10k_core]) [<bf487540>] (ath10k_htt_txrx_compl_task+0x8b4/0x1188 [ath10k_core]) [<c00312d4>] (tasklet_action+0x8c/0xec) [<c00309a8>] (__do_softirq+0xdc/0x208) [<c0030d6c>] (irq_exit+0x84/0xe0) [<c005db04>] (__handle_domain_irq+0x80/0xa0) [<c00085c4>] (gic_handle_irq+0x38/0x5c) [<c0009640>] (__irq_svc+0x40/0x74) (gdb) list *(ath10k_htt_rx_pktlog_completion_handler+0x1c0) 0x136c0 is in ath10k_htt_rx_h_channel (drivers/net/wireless/ath/ath10k/htt_rx.c:769) 764 struct cfg80211_chan_def def; 765 766 lockdep_assert_held(&ar->data_lock); 767 768 list_for_each_entry(arvif, &ar->arvifs, list) { 769 if (arvif->vdev_id == vdev_id && 770 ath10k_mac_vif_chan(arvif->vif, &def) == 0) 771 return def.chan; 772 } 773 Signed-off-by:
Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com> Signed-off-by:
Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by:
Amit Pundir <amit.pundir@linaro.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Greg Hackmann authored
(commit 1a381d4a upstream) Linking the ARM64 defconfig kernel with LLVM lld fails with the error: ld.lld: error: unknown argument: -p Makefile:1015: recipe for target 'vmlinux' failed Without this flag, the ARM64 defconfig kernel successfully links with lld and boots on Dragonboard 410c. After digging through binutils source and changelogs, it turns out that -p is only relevant to ancient binutils installations targeting 32-bit ARM. binutils accepts -p for AArch64 too, but it's always been undocumented and silently ignored. A comment in ld/emultempl/aarch64elf.em explains that it's "Only here for backwards compatibility". Since this flag is a no-op on ARM64, we can safely drop it. Acked-by:
Will Deacon <will.deacon@arm.com> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Greg Hackmann <ghackmann@google.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Johan Hovold authored
[ Upstream commit d397dbe6 ] Use the new of_get_compatible_child() helper to lookup the mdio child node instead of using of_find_compatible_node(), which searches the entire tree from a given start node and thus can return an unrelated (i.e. non-child) node. This also addresses a potential use-after-free (e.g. after probe deferral) as the tree-wide helper drops a reference to its first argument (i.e. the node of the device being probed). Fixes: aa09677c ("net: bcmgenet: add MDIO routines") Cc: stable <stable@vger.kernel.org> # 3.15 Cc: David S. Miller <davem@davemloft.net> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Johan Hovold authored
[ Upstream commit 5bf59773 ] Use the new of_get_compatible_child() helper to lookup the nfc child node instead of using of_find_compatible_node(), which searches the entire tree from a given start node and thus can return an unrelated (i.e. non-child) node. This also addresses a potential use-after-free (e.g. after probe deferral) as the tree-wide helper drops a reference to its first argument (i.e. the parent node). Fixes: e097dc62 ("NFC: nfcmrvl: add UART driver") Fixes: d8e018c0 ("NFC: nfcmrvl: update device tree bindings for Marvell NFC") Cc: stable <stable@vger.kernel.org> # 4.2 Cc: Vincent Cuissard <cuissard@marvell.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by:
-
Johan Hovold authored
[ Upstream commit 36156f92 ] Add of_get_compatible_child() helper that can be used to lookup compatible child nodes. Several drivers currently use of_find_compatible_node() to lookup child nodes while failing to notice that the of_find_ functions search the entire tree depth-first (from a given start node) and therefore can match unrelated nodes. The fact that these functions also drop a reference to the node they start searching from (e.g. the parent node) is typically also overlooked, something which can lead to use-after-free bugs. Signed-off-by:
-
Yufen Yu authored
[ Upstream commit 1a413646 ] Other filesystems such as ext4, f2fs and ubifs all return ENXIO when lseek (SEEK_DATA or SEEK_HOLE) requests a negative offset. man 2 lseek says : EINVAL whence is not valid. Or: the resulting file offset would be : negative, or beyond the end of a seekable device. : : ENXIO whence is SEEK_DATA or SEEK_HOLE, and the file offset is beyond : the end of the file. Make tmpfs return ENXIO under these circumstances as well. After this, tmpfs also passes xfstests's generic/448. [akpm@linux-foundation.org: rewrite changelog] Link: http://lkml.kernel.org/r/1540434176-14349-1-git-send-email-yuyufen@huawei.comSigned-off-by:
Yufen Yu <yuyufen@huawei.com> Reviewed-by:
Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Hugh Dickins <hughd@google.com> Cc: William Kucharski <william.kucharski@oracle.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Ard Biesheuvel authored
[ Upstream commit 33412b86 ] Commit: 3ea86495 ("efi/arm: preserve early mapping of UEFI memory map longer for BGRT") deferred the unmap of the early mapping of the UEFI memory map to accommodate the ACPI BGRT code, which looks up the memory type that backs the BGRT table to validate it against the requirements of the UEFI spec. Unfortunately, this causes problems on ARM, which does not permit early mappings to persist after paging_init() is called, resulting in a WARN() splat. Since we don't support the BGRT table on ARM anway, let's revert ARM to the old behaviour, which is to take down the early mapping at the end of efi_init(). Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Fixes: 3ea86495 ("efi/arm: preserve early mapping of UEFI memory ...") Link: http://lkml.kernel.org/r/20181114175544.12860-3-ard.biesheuvel@linaro.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Satheesh Rajendran authored
[ Upstream commit 437ccdc8 ] When VPHN function is not supported and during cpu hotplug event, kernel prints message 'VPHN function not supported. Disabling polling...'. Currently it prints on every hotplug event, it floods dmesg when a KVM guest tries to hotplug huge number of vcpus, let's just print once and suppress further kernel prints. Signed-off-by:
Satheesh Rajendran <sathnaga@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Prarit Bhargava authored
[ Upstream commit c2b94c72 ] gcc 8.1.0 warns with: kernel/debug/kdb/kdb_support.c: In function ‘kallsyms_symbol_next’: kernel/debug/kdb/kdb_support.c:239:4: warning: ‘strncpy’ specified bound depends on the length of the source argument [-Wstringop-overflow=] strncpy(prefix_name, name, strlen(name)+1); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ kernel/debug/kdb/kdb_support.c:239:31: note: length computed here Use strscpy() with the destination buffer size, and use ellipses when displaying truncated symbols. v2: Use strscpy() Signed-off-by:
Prarit Bhargava <prarit@redhat.com> Cc: Jonathan Toppins <jtoppins@redhat.com> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: kgdb-bugreport@lists.sourceforge.net Reviewed-by:
Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by:
-
Trond Myklebust authored
[ Upstream commit e3d5e573 ] Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by:
-
Kan Liang authored
[ Upstream commit c10a8de0 ] KabyLake and CoffeeLake CPUs have the same client uncore events as SkyLake. Add the PCI IDs for the KabyLake Y, U, S processor lines and CoffeeLake U, H, S processor lines. Signed-off-by:
Kan Liang <kan.liang@linux.intel.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/20181019170419.378-1-kan.liang@linux.intel.comSigned-off-by:
-
Michael Ellerman authored
[ Upstream commit 43c6494f ] Back in 2006 Ben added some workarounds for a misbehaviour in the Spider IO bridge used on early Cell machines, see commit 014da7ff ("[POWERPC] Cell "Spider" MMIO workarounds"). Later these were made to be generic, ie. not tied specifically to Spider. The code stashes a token in the high bits (59-48) of virtual addresses used for IO (eg. returned from ioremap()). This works fine when using the Hash MMU, but when we're using the Radix MMU the bits used for the token overlap with some of the bits of the virtual address. This is because the maximum virtual address is larger with Radix, up to c00fffffffffffff, and in fact we use that high part of the address range for ioremap(), see RADIX_KERN_IO_START. As it happens the bits that are used overlap with the bits that differentiate an IO address vs a linear map address. If the resulting address lies outside the linear mapping we will crash (see below), if not we just corrupt memory. virtio-pci 0000:00:00.0: Using 64-bit direct DMA at offset 800000000000000 Unable to handle kernel paging request for data at address 0xc000000080000014 ... CFAR: c000000000626b98 DAR: c000000080000014 DSISR: 42000000 IRQMASK: 0 GPR00: c0000000006c54fc c00000003e523378 c0000000016de600 0000000000000000 GPR04: c00c000080000014 0000000000000007 0fffffff000affff 0000000000000030 ^^^^ ... NIP [c000000000626c5c] .iowrite8+0xec/0x100 LR [c0000000006c992c] .vp_reset+0x2c/0x90 Call Trace: .pci_bus_read_config_dword+0xc4/0x120 (unreliable) .register_virtio_device+0x13c/0x1c0 .virtio_pci_probe+0x148/0x1f0 .local_pci_probe+0x68/0x140 .pci_device_probe+0x164/0x220 .really_probe+0x274/0x3b0 .driver_probe_device+0x80/0x170 .__driver_attach+0x14c/0x150 .bus_for_each_dev+0xb8/0x130 .driver_attach+0x34/0x50 .bus_add_driver+0x178/0x2f0 .driver_register+0x90/0x1a0 .__pci_register_driver+0x6c/0x90 .virtio_pci_driver_init+0x2c/0x40 .do_one_initcall+0x64/0x280 .kernel_init_freeable+0x36c/0x474 .kernel_init+0x24/0x160 .ret_from_kernel_thread+0x58/0x7c This hasn't been a problem because CONFIG_PPC_IO_WORKAROUNDS which enables this code is usually not enabled. It is only enabled when it's selected by PPC_CELL_NATIVE which is only selected by PPC_IBM_CELL_BLADE and that in turn depends on BIG_ENDIAN. So in order to hit the bug you need to build a big endian kernel, with IBM Cell Blade support enabled, as well as Radix MMU support, and then boot that on Power9 using Radix MMU. Still we can fix the bug, so let's do that. We simply use fewer bits for the token, taking the union of the restrictions on the address from both Hash and Radix, we end up with 8 bits we can use for the token. The only user of the token is iowa_mem_find_bus() which only supports 8 token values, so 8 bits is plenty for that. Fixes: 566ca99a ("powerpc/mm/radix: Add dummy radix_enabled()") Signed-off-by:
-
Jens Axboe authored
[ Upstream commit de7b75d8 ] LKP recently reported a hang at bootup in the floppy code: [ 245.678853] INFO: task mount:580 blocked for more than 120 seconds. [ 245.679906] Tainted: G T 4.19.0-rc6-00172-ga9f38e1d #1 [ 245.680959] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 245.682181] mount D 6372 580 1 0x00000004 [ 245.683023] Call Trace: [ 245.683425] __schedule+0x2df/0x570 [ 245.683975] schedule+0x2d/0x80 [ 245.684476] schedule_timeout+0x19d/0x330 [ 245.685090] ? wait_for_common+0xa5/0x170 [ 245.685735] wait_for_common+0xac/0x170 [ 245.686339] ? do_sched_yield+0x90/0x90 [ 245.686935] wait_for_completion+0x12/0x20 [ 245.687571] __floppy_read_block_0+0xfb/0x150 [ 245.688244] ? floppy_resume+0x40/0x40 [ 245.688844] floppy_revalidate+0x20f/0x240 [ 245.689486] check_disk_change+0x43/0x60 [ 245.690087] floppy_open+0x1ea/0x360 [ 245.690653] __blkdev_get+0xb4/0x4d0 [ 245.691212] ? blkdev_get+0x1db/0x370 [ 245.691777] blkdev_get+0x1f3/0x370 [ 245.692351] ? path_put+0x15/0x20 [ 245.692871] ? lookup_bdev+0x4b/0x90 [ 245.693539] blkdev_get_by_path+0x3d/0x80 [ 245.694165] mount_bdev+0x2a/0x190 [ 245.694695] squashfs_mount+0x10/0x20 [ 245.695271] ? squashfs_alloc_inode+0x30/0x30 [ 245.695960] mount_fs+0xf/0x90 [ 245.696451] vfs_kern_mount+0x43/0x130 [ 245.697036] do_mount+0x187/0xc40 [ 245.697563] ? memdup_user+0x28/0x50 [ 245.698124] ksys_mount+0x60/0xc0 [ 245.698639] sys_mount+0x19/0x20 [ 245.699167] do_int80_syscall_32+0x61/0x130 [ 245.699813] entry_INT80_32+0xc7/0xc7 showing that we never complete that read request. The reason is that the completion setup is racy - it initializes the completion event AFTER submitting the IO, which means that the IO could complete before/during the init. If it does, we are passing garbage to complete() and we may sleep forever waiting for the event to occur. Fixes: 7b7b68bb ("floppy: bail out in open() if drive is not responding to block0 read") Reviewed-by:
Omar Sandoval <osandov@fb.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Xulin Sun authored
[ Upstream commit 9bde0afb ] pcf2127_i2c_gather_write() allocates memory as local variable for i2c_master_send(), after finishing the master transfer, the allocated memory should be freed. The kmemleak is reported: unreferenced object 0xffff80231e7dba80 (size 64): comm "hwclock", pid 27762, jiffies 4296880075 (age 356.944s) hex dump (first 32 bytes): 03 00 12 03 19 02 11 13 00 80 98 18 00 00 ff ff ................ 00 50 00 00 00 00 00 00 02 00 00 00 00 00 00 00 .P.............. backtrace: [<ffff000008221398>] create_object+0xf8/0x278 [<ffff000008a96264>] kmemleak_alloc+0x74/0xa0 [<ffff00000821070c>] __kmalloc+0x1ac/0x348 [<ffff0000087ed1dc>] pcf2127_i2c_gather_write+0x54/0xf8 [<ffff0000085fd9d4>] _regmap_raw_write+0x464/0x850 [<ffff0000085fe3f4>] regmap_bulk_write+0x1a4/0x348 [<ffff0000087ed32c>] pcf2127_rtc_set_time+0xac/0xe8 [<ffff0000087eaad8>] rtc_set_time+0x80/0x138 [<ffff0000087ebfb0>] rtc_dev_ioctl+0x398/0x610 [<ffff00000823f2c0>] do_vfs_ioctl+0xb0/0x848 [<ffff00000823fae4>] SyS_ioctl+0x8c/0xa8 [<ffff000008083ac0>] el0_svc_naked+0x34/0x38 [<ffffffffffffffff>] 0xffffffffffffffff Signed-off-by:
Xulin Sun <xulin.sun@windriver.com> Signed-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
-
Anson Huang authored
[ Upstream commit 6ef28a04 ] Add return value check for voltage scale when ARM clock rate change fail. Signed-off-by:
Anson Huang <Anson.Huang@nxp.com> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Scott Wood authored
[ Upstream commit 28c5bcf7 ] TRACE_INCLUDE_PATH and TRACE_INCLUDE_FILE are used by <trace/define_trace.h>, so like that #include, they should be outside #ifdef protection. They also need to be #undefed before defining, in case multiple trace headers are included by the same C file. This became the case on book3e after commit cf4a6085 ("powerpc/mm: Add missing tracepoint for tlbie"), leading to the following build error: CC arch/powerpc/kvm/powerpc.o In file included from arch/powerpc/kvm/powerpc.c:51:0: arch/powerpc/kvm/trace.h:9:0: error: "TRACE_INCLUDE_PATH" redefined [-Werror] #define TRACE_INCLUDE_PATH . ^ In file included from arch/powerpc/kvm/../mm/mmu_decl.h:25:0, from arch/powerpc/kvm/powerpc.c:48: ./arch/powerpc/include/asm/trace.h:224:0: note: this is the location of the previous definition #define TRACE_INCLUDE_PATH asm ^ cc1: all warnings being treated as errors Reported-by:
Christian Zigotzky <chzigotzky@xenosoft.de> Signed-off-by:
Scott Wood <oss@buserror.net> Signed-off-by:
-
Jerome Brunet authored
[ Upstream commit e39f9dd8 ] If a bias is enabled on a pin of an Amlogic SoC, calling .pin_config_set() with PIN_CONFIG_BIAS_DISABLE will not disable the bias. Instead it will force a pull-down bias on the pin. Instead of the pull type register bank, the driver should access the pull enable register bank. Fixes: 6ac73095 ("pinctrl: add driver for Amlogic Meson SoCs") Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com> Acked-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Mathias Nyman authored
commit 2f31a67f upstream. USB3 roothub might autosuspend before a plugged USB3 device is detected, causing USB3 device enumeration failure. USB3 devices don't show up as connected and enabled until USB3 link trainig completes. On a fast booting platform with a slow USB3 link training the link might reach the connected enabled state just as the bus is suspending. If this device is discovered first time by the xhci_bus_suspend() routine it will be put to U3 suspended state like the other ports which failed to suspend earlier. The hub thread will notice the connect change and resume the bus, moving the port back to U0 This U0 -> U3 -> U0 transition right after being connected seems to be too much for some devices, causing them to first go to SS.Inactive state, and finally end up stuck in a polling state with reset asserted Fix this by failing the bus suspend if a port has a connect change or is in a polling state in xhci_bus_suspend(). Don't do any port changes until all ports are checked, buffer all port changes and only write them in the end if suspend can proceed Cc: stable@vger.kernel.org Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Michael J. Ruhl authored
commit a0e0cb82 upstream. pq_update() can only be called in two places: from the completion function when the complete (npkts) sequence of packets has been submitted and processed, or from setup function if a subset of the packets were submitted (i.e. the error path). Currently both paths can call pq_update() if an error occurrs. This race will cause the n_req value to go negative, hanging file_close(), or cause a crash by freeing the txlist more than once. Several variables are used to determine SDMA send state. Most of these are unnecessary, and have code inspectible races between the setup function and the completion function, in both the send path and the error path. The request 'status' value can be set by the setup or by the completion function. This is code inspectibly racy. Since the status is not needed in the completion code or by the caller it has been removed. The request 'done' value races between usage by the setup and the completion function. The completion function does not need this. When the number of processed packets matches npkts, it is done. The 'has_error' value races between usage of the setup and the completion function. This can cause incorrect error handling and leave the n_req in an incorrect value (i.e. negative). Simplify the code by removing all of the unneeded state checks and variables. Clean up iovs node when it is freed. Eliminate race conditions in the error path: If all packets are submitted, the completion handler will set the completion status correctly (ok or aborted). If all packets are not submitted, the caller must wait until the submitted packets have completed, and then set the completion status. These two change eliminate the race condition in the error path. Reviewed-by:
Mitko Haralanov <mitko.haralanov@intel.com> Reviewed-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Alex Estrin authored
commit e6f9bc34 upstream. Build with the latest patches resulted in panic: 11384.486289] BUG: unable to handle kernel NULL pointer dereference at (null) [11384.486293] IP: (null) [11384.486295] PGD 0 [11384.486295] P4D 0 [11384.486296] [11384.486299] Oops: 0010 [#1] SMP ......... snip ...... [11384.486401] CPU: 0 PID: 968 Comm: kworker/0:1H Tainted: G W O 4.13.0-a-stream-20170825 #1 [11384.486402] Hardware name: Intel Corporation S2600WT2R/S2600WT2R, BIOS SE5C610.86B.01.01.0014.121820151719 12/18/2015 [11384.486418] Workqueue: ib-comp-wq ib_cq_poll_work [ib_core] [11384.486419] task: ffff880850579680 task.stack: ffffc90007fec000 [11384.486420] RIP: 0010: (null) [11384.486420] RSP: 0018:ffffc90007fef970 EFLAGS: 00010206 [11384.486421] RAX: ffff88084cfe8000 RBX: ffff88084dce4000 RCX: ffffc90007fef978 [11384.486422] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff88084cfe8000 [11384.486422] RBP: ffffc90007fefab0 R08: 0000000000000000 R09: ffff88084dce4080 [11384.486423] R10: ffffffffa02d7f60 R11: 0000000000000000 R12: ffff88105af65a00 [11384.486423] R13: ffff88084dce4000 R14: 000000000000c000 R15: 000000000000c000 [11384.486424] FS: 0000000000000000(0000) GS:ffff88085f400000(0000) knlGS:0000000000000000 [11384.486425] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [11384.486425] CR2: 0000000000000000 CR3: 0000000001c09000 CR4: 00000000001406f0 [11384.486426] Call Trace: [11384.486431] ? is_valid_mcast_lid.isra.21+0xfb/0x110 [ib_core] [11384.486436] ib_attach_mcast+0x6f/0xa0 [ib_core] [11384.486441] ipoib_mcast_attach+0x81/0x190 [ib_ipoib] [11384.486443] ipoib_mcast_join_complete+0x354/0xb40 [ib_ipoib] [11384.486448] mcast_work_handler+0x330/0x6c0 [ib_core] [11384.486452] join_handler+0x101/0x220 [ib_core] [11384.486455] ib_sa_mcmember_rec_callback+0x54/0x80 [ib_core] [11384.486459] recv_handler+0x3a/0x60 [ib_core] [11384.486462] ib_mad_recv_done+0x423/0x9b0 [ib_core] [11384.486466] __ib_process_cq+0x5d/0xb0 [ib_core] [11384.486469] ib_cq_poll_work+0x20/0x60 [ib_core] [11384.486472] process_one_work+0x149/0x360 [11384.486474] worker_thread+0x4d/0x3c0 [11384.486487] kthread+0x109/0x140 [11384.486488] ? rescuer_thread+0x380/0x380 [11384.486489] ? kthread_park+0x60/0x60 [11384.486490] ? kthread_park+0x60/0x60 [11384.486493] ret_from_fork+0x25/0x30 [11384.486493] Code: Bad RIP value. [11384.486493] Code: Bad RIP value. [11384.486496] RIP: (null) RSP: ffffc90007fef970 [11384.486497] CR2: 0000000000000000 [11384.486531] ---[ end trace b1acec6fb4ff6e75 ]--- [11384.532133] Kernel panic - not syncing: Fatal exception [11384.536541] Kernel Offset: disabled [11384.969491] ---[ end Kernel panic - not syncing: Fatal exception [11384.976875] sched: Unexpected reschedule of offline CPU#1! [11384.983646] ------------[ cut here ]------------ Rdma device driver may not have implemented (*get_link_layer)() so it can not be called directly. Should use appropriate helper function. Reviewed-by:
Yuval Shaia <yuval.shaia@oracle.com> Fixes: 52363335 ("IB/core: Fix the validations of a multicast LID in attach or detach operations") Cc: stable@kernel.org # 4.13 Reviewed-by:
Alex Estrin <alex.estrin@intel.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Cc: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
-
Marc Kleine-Budde authored
commit 7da11ba5 upstream. Prior to echoing a successfully transmitted CAN frame (by calling can_get_echo_skb()), CAN drivers have to put the CAN frame (by calling can_put_echo_skb() in the transmit function). These put and get function take an index as parameter, which is used to identify the CAN frame. A driver calling can_get_echo_skb() with a index not pointing to a skb is a BUG, so add an appropriate error message. Cc: linux-stable <stable@vger.kernel.org> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Marc Kleine-Budde authored
can: dev: __can_get_echo_skb(): Don't crash the kernel if can_priv::echo_skb is accessed out of bounds commit e7a6994d upstream. If the "struct can_priv::echo_skb" is accessed out of bounds would lead to a kernel crash. Better print a sensible warning message instead and try to recover. Cc: linux-stable <stable@vger.kernel.org> Signed-off-by:
-
Marc Kleine-Budde authored
commit 200f5c49 upstream. This patch replaces the use of "struct can_frame::can_dlc" by "struct canfd_frame::len" to access the frame's length. As it is ensured that both structures have a compatible memory layout for this member this is no functional change. Futher, this compatibility is documented in a comment. Cc: linux-stable <stable@vger.kernel.org> Signed-off-by:
-
Marc Kleine-Budde authored
commit a4310fa2 upstream. This patch factors out all non sending parts of can_get_echo_skb() into a seperate function __can_get_echo_skb(), so that it can be re-used in an upcoming patch. Cc: linux-stable <stable@vger.kernel.org> Signed-off-by:
-
Thomas Zimmermann authored
commit 5478ad10 upstream. If vesafb attaches to the AST device, it configures the framebuffer memory for uncached access by default. When ast.ko later tries to attach itself to the device, it wants to use write-combining on the framebuffer memory, but vesefb's existing configuration for uncached access takes precedence. This results in reduced performance. Removing the framebuffer's configuration before loding the AST driver fixes the problem. Other DRM drivers already contain equivalent code. Link: https://bugzilla.opensuse.org/show_bug.cgi?id=1112963Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Cc: <stable@vger.kernel.org> Tested-by:
Y.C. Chen <yc_chen@aspeedtech.com> Reviewed-by:
Jean Delvare <jdelvare@suse.de> Tested-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
