Multi-cluster remoteproc designs typically have the following DT
declaration:

        remoteproc-cluster {
                compatible = "soc,remoteproc-cluster";

                core0: core0 {
                        compatible = "soc,remoteproc-core"
                        memory-region;
                        sram;
                };

                core1: core1 {
                        compatible = "soc,remoteproc-core"
                        memory-region;
                        sram;
                }
        };

A driver exists for the cluster rather than the individual cores
themselves so that operation mode and HW specific configurations
applicable to the cluster can be made.

Because the driver exists at the cluster level and not the individual
core level, function rproc_get_by_phandle() fails to return the
remoteproc associated with the phandled it is called for.

This patch enhances rproc_get_by_phandle() by looking for the cluster's
driver when the driver for the immediate remoteproc's parent is not
found.
Reported-by: Ben Levinsky <ben.levinsky@xilinx.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Co-developed-by: Tarak Reddy <tarak.reddy@amd.com>
Signed-off-by: Tarak Reddy <tarak.reddy@amd.com>
Co-developed-by: Tanmay Shah <tanmay.shah@amd.com>
Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
Link: https://lore.kernel.org/r/20240130154849.1018666-1-tanmay.shah@amd.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add DSP Peripheral Authentication Service support for the SM8650 platform.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Mukesh Ojha <quic_mojha@quicinc.com>
Link: https://lore.kernel.org/r/20240123-topic-sm8650-upstream-remoteproc-v7-3-61283f50162f@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

The current memory region assign only supports a single
memory region.

But new platforms introduces more regions to make the
memory requirements more flexible for various use cases.
Those new platforms also shares the memory region between the
DSP and HLOS.

To handle this, make the region assign more generic in order
to support more than a single memory region and also permit
setting the regions permissions as shared.
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240123-topic-sm8650-upstream-remoteproc-v7-2-61283f50162f@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Document the DSP Peripheral Authentication Service on the SM8650 Platform.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240123-topic-sm8650-upstream-remoteproc-v7-1-61283f50162f@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Use device lifecycle managed devm_rproc_add() helper function. This helps
prevent mistakes like deleting out of order in cleanup functions and
forgetting to delete on all error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240205182753.36978-6-afd@ti.comSigned-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>

Use a device lifecycle managed ioremap helper function. This helps prevent
mistakes like unmapping out of order in cleanup functions and forgetting
to unmap on all error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240205182753.36978-5-afd@ti.comSigned-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>

Use a device lifecycle managed action to release tps ti_sci_proc handle.
This helps prevent mistakes like releasing out of order in cleanup
functions and forgetting to release on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240205182753.36978-4-afd@ti.comSigned-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>

Use device lifecycle managed devm_kzalloc() helper function. This helps
prevent mistakes like freeing out of order in cleanup functions and
forgetting to free on all error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240205182753.36978-3-afd@ti.comSigned-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>

Use the device lifecycle managed TI-SCI get() function. This helps prevent
mistakes like not put()'ing in the wrong order in cleanup functions and
forgetting to put() on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240205182753.36978-2-afd@ti.comSigned-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>

Use the device lifecycle managed allocation function. This helps prevent
mistakes like freeing out of order in cleanup functions and forgetting to
free on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123184632.725054-9-afd@ti.comSigned-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>

Use the device lifecycle managed allocation function. This helps prevent
mistakes like freeing out of order in cleanup functions and forgetting to
free on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123184632.725054-8-afd@ti.comSigned-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>

Use the device lifecycle managed allocation function. This helps prevent
mistakes like freeing out of order in cleanup functions and forgetting to
free on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123184632.725054-2-afd@ti.comSigned-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>

Use the device lifecycle managed allocation function. This helps prevent
mistakes like freeing out of order in cleanup functions and forgetting to
free on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123184632.725054-1-afd@ti.comSigned-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>

Use a device lifecycle managed action to free memory. This helps prevent
mistakes like freeing out of order in cleanup functions and forgetting to
free on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123184913.725435-3-afd@ti.comSigned-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>

Use a device lifecycle managed action to release reserved memory. This
helps prevent mistakes like releasing out of order in cleanup functions
and forgetting to release on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123184913.725435-2-afd@ti.comSigned-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>

Use the device lifecycle managed allocation function. This helps prevent
mistakes like freeing out of order in cleanup functions and forgetting to
free on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123184913.725435-1-afd@ti.comSigned-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>

The sparse tool complains about the remove of the _iomem attribute.

stm32_rproc.c:660:17: warning: cast removes address space '__iomem' of expression

Add '__force' to explicitly specify that the cast is intentional.
This conversion is necessary to cast to addresses pointer,
which are then managed by the remoteproc core as a pointer to a
resource_table structure.

Fixes: 8a471396 ("remoteproc: stm32: Move resource table setup to rproc_ops")
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Link: https://lore.kernel.org/r/20240117135312.3381936-3-arnaud.pouliquen@foss.st.comSigned-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>

The sparse tool complains about the attribute conversion between
a _iomem void * and a void *:

stm32_rproc.c:122:12: sparse: sparse: incorrect type in assignment (different address spaces) @@     expected void *va @@     got void [noderef] __iomem * @@
stm32_rproc.c:122:12: sparse:     expected void *va
stm32_rproc.c:122:12: sparse:     got void [noderef] __iomem *

Add '__force' to explicitly specify that the cast is intentional.
This conversion is necessary to cast to virtual addresses pointer,used,
by the remoteproc core.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312150052.HCiNKlqB-lkp@intel.com/
Fixes: 13140de0 ("remoteproc: stm32: add an ST stm32_rproc driver")
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Link: https://lore.kernel.org/r/20240117135312.3381936-2-arnaud.pouliquen@foss.st.comSigned-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>

Recovery remote processor failed when wdg irq received:
[    0.842574] remoteproc remoteproc0: crash detected in cix-dsp-rproc: type watchdog
[    0.842750] remoteproc remoteproc0: handling crash #1 in cix-dsp-rproc
[    0.842824] remoteproc remoteproc0: recovering cix-dsp-rproc
[    0.843342] remoteproc remoteproc0: stopped remote processor cix-dsp-rproc
[    0.847901] rproc-virtio rproc-virtio.0.auto: Failed to associate buffer
[    0.847979] remoteproc remoteproc0: failed to probe subdevices for cix-dsp-rproc: -16

The reason is that dma coherent mem would not be released when
recovering the remote processor, due to rproc_virtio_remove()
would not be called, where the mem released. It will fail when
it try to allocate and associate buffer again.

Releasing reserved memory from rproc_virtio_dev_release(), instead of
rproc_virtio_remove().

Fixes: 1d7b61c0 ("remoteproc: virtio: Create platform device for the remoteproc_virtio")
Signed-off-by: Joakim Zhang <joakim.zhang@cixtech.com>
Acked-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231217053659.3245745-1-joakim.zhang@cixtech.comSigned-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>

Pull more bcachefs updates from Kent Overstreet:
 "Some fixes, Some refactoring, some minor features:

   - Assorted prep work for disk space accounting rewrite

   - BTREE_TRIGGER_ATOMIC: after combining our trigger callbacks, this
     makes our trigger context more explicit

   - A few fixes to avoid excessive transaction restarts on
     multithreaded workloads: fstests (in addition to ktest tests) are
     now checking slowpath counters, and that's shaking out a few bugs

   - Assorted tracepoint improvements

   - Starting to break up bcachefs_format.h and move on disk types so
     they're with the code they belong to; this will make room to start
     documenting the on disk format better.

   - A few minor fixes"

* tag 'bcachefs-2024-01-21' of https://evilpiepirate.org/git/bcachefs: (46 commits)
  bcachefs: Improve inode_to_text()
  bcachefs: logged_ops_format.h
  bcachefs: reflink_format.h
  bcachefs; extents_format.h
  bcachefs: ec_format.h
  bcachefs: subvolume_format.h
  bcachefs: snapshot_format.h
  bcachefs: alloc_background_format.h
  bcachefs: xattr_format.h
  bcachefs: dirent_format.h
  bcachefs: inode_format.h
  bcachefs; quota_format.h
  bcachefs: sb-counters_format.h
  bcachefs: counters.c -> sb-counters.c
  bcachefs: comment bch_subvolume
  bcachefs: bch_snapshot::btime
  bcachefs: add missing __GFP_NOWARN
  bcachefs: opts->compression can now also be applied in the background
  bcachefs: Prep work for variable size btree node buffers
  bcachefs: grab s_umount only if snapshotting
  ...

Pull timer updates from Thomas Gleixner:
 "Updates for time and clocksources:

   - A fix for the idle and iowait time accounting vs CPU hotplug.

     The time is reset on CPU hotplug which makes the accumulated
     systemwide time jump backwards.

   - Assorted fixes and improvements for clocksource/event drivers"

* tag 'timers-core-2024-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tick-sched: Fix idle and iowait sleeptime accounting vs CPU hotplug
  clocksource/drivers/ep93xx: Fix error handling during probe
  clocksource/drivers/cadence-ttc: Fix some kernel-doc warnings
  clocksource/drivers/timer-ti-dm: Fix make W=n kerneldoc warnings
  clocksource/timer-riscv: Add riscv_clock_shutdown callback
  dt-bindings: timer: Add StarFive JH8100 clint
  dt-bindings: timer: thead,c900-aclint-mtimer: separate mtime and mtimecmp regs

Pull powerpc fixes from Aneesh Kumar:

 - Increase default stack size to 32KB for Book3S

Thanks to Michael Ellerman.

* tag 'powerpc-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64s: Increase default stack size to 32KB

Add line breaks - inode_to_text() is now much easier to read.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs_format.h has gotten too big; let's do some organizing.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Add a field to bch_snapshot for creation time; this will be important
when we start exposing the snapshot tree to userspace.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>