- 19 Oct, 2018 40 commits
-
-
Mike Christie authored
BugLink: https://bugs.launchpad.net/bugs/1798539 [ Upstream commit 6a64f6e1 ] When __transport_register_session is called from transport_register_session irqs will already have been disabled, so we do not want the unlock irq call to enable them until the higher level has done the final spin_unlock_irqrestore/ spin_unlock_irq. This has __transport_register_session use the save/restore call. Signed-off-by:
Mike Christie <mchristi@redhat.com> Reviewed-by:
Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Stefan Bader <stefan.bader@canonical.com> Signed-off-by:
Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Dmitry Osipenko authored
BugLink: https://bugs.launchpad.net/bugs/1798539 [ Upstream commit 40b25bce ] There is a bug in regards to deferred probing within the drivers core that causes GPIO-driver to suspend after its users. The bug appears if GPIO-driver probe is getting deferred, which happens after introducing dependency on PINCTRL-driver for the GPIO-driver by defining "gpio-ranges" property in device-tree. The bug in the drivers core is old (more than 4 years now) and is well known, unfortunately there is no easy fix for it. The good news is that we can workaround the deferred probe issue by changing GPIO / PINCTRL drivers registration order and hence by moving PINCTRL driver registration to the arch_init level and GPIO to the subsys_init. Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Acked-by:
Stefan Agner <stefan@agner.ch> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Florian Fainelli authored
BugLink: https://bugs.launchpad.net/bugs/1798539 [ Upstream commit d89d4155 ] Android's header sanitization tool chokes on static inline functions having a trailing semicolon, leading to an incorrectly parsed header file. While the tool should obviously be fixed, also fix the header files for the two affected functions: ethtool_get_flow_spec_ring() and ethtool_get_flow_spec_ring_vf(). Fixes: 8cf6f497 ("ethtool: Add helper routines to pass vf to rx_flow_spec") Reporetd-by:
Blair Prescott <blair.prescott@broadcom.com> Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Dan Carpenter authored
BugLink: https://bugs.launchpad.net/bugs/1798539 [ Upstream commit a39284ae ] There are only 2 callers of scif_get_new_port() and both appear to get the error handling wrong. Both treat zero returns as error, but it actually returns negative error codes and >= 0 on success. Fixes: e9089f43 ("misc: mic: SCIF open close bind and listen APIs") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Alexey Brodkin authored
BugLink: https://bugs.launchpad.net/bugs/1798539 commit c83532fb upstream. SWAP support on ARC was fixed earlier by commit 6e376114 ("ARC: Fix CONFIG_SWAP") so now we may safely enable it on platforms that have external media like USB and SD-card. Note: it was already allowed for HSDK Signed-off-by:
Alexey Brodkin <abrodkin@synopsys.com> Cc: stable@vger.kernel.org # 6e376114: ARC: Fix CONFIG_SWAP Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Prateek Sood authored
BugLink: https://bugs.launchpad.net/bugs/1798539 commit 50972fe7 upstream. Fix ordering of link creation between node->prev and prev->next in osq_lock(). A case in which the status of optimistic spin queue is CPU6->CPU2 in which CPU6 has acquired the lock. tail v ,-. <- ,-. |6| |2| `-' -> `-' At this point if CPU0 comes in to acquire osq_lock, it will update the tail count. CPU2 CPU0 ---------------------------------- tail v ,-. <- ,-. ,-. |6| |2| |0| `-' -> `-' `-' After tail count update if CPU2 starts to unqueue itself from optimistic spin queue, it will find an updated tail count with CPU0 and update CPU2 node->next to NULL in osq_wait_next(). unqueue-A tail v ,-. <- ,-. ,-. |6| |2| |0| `-' `-' `-' unqueue-B ->tail != curr && !node->next If reordering of following stores happen then prev->next where prev being CPU2 would be updated to point to CPU0 node: tail v ,-. <- ,-. ,-. |6| |2| |0| `-' `-' -> `-' osq_wait_next() node->next <- 0 xchg(node->next, NULL) tail v ,-. <- ,-. ,-. |6| |2| |0| `-' `-' `-' unqueue-C At this point if next instruction WRITE_ONCE(next->prev, prev); in CPU2 path is committed before the update of CPU0 node->prev = prev then CPU0 node->prev will point to CPU6 node. tail v----------. v ,-. <- ,-. ,-. |6| |2| |0| `-' `-' `-' `----------^ At this point if CPU0 path's node->prev = prev is committed resulting in change of CPU0 prev back to CPU2 node. CPU2 node->next is NULL currently, tail v ,-. <- ,-. <- ,-. |6| |2| |0| `-' `-' `-' `----------^ so if CPU0 gets into unqueue path of osq_lock it will keep spinning in infinite loop as condition prev->next == node will never be true. Signed-off-by:
Prateek Sood <prsood@codeaurora.org> [ Added pictures, rewrote comments. ] Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: sramana@codeaurora.org Link: http://lkml.kernel.org/r/1500040076-27626-1-git-send-email-prsood@codeaurora.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
Amit Pundir <amit.pundir@linaro.org> Signed-off-by:
-
Michal Hocko authored
BugLink: https://bugs.launchpad.net/bugs/1798539 commit 476accbe upstream. There is a strange __GFP_NOMEMALLOC usage pattern in SELinux, specifically GFP_ATOMIC | __GFP_NOMEMALLOC which doesn't make much sense. GFP_ATOMIC on its own allows to access memory reserves while __GFP_NOMEMALLOC dictates we cannot use memory reserves. Replace this with the much more sane GFP_NOWAIT in the AVC code as we can tolerate memory allocation failures in that code. Signed-off-by:
Michal Hocko <mhocko@kernel.org> Acked-by:
Mel Gorman <mgorman@suse.de> Signed-off-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
-
Prateek Sood authored
BugLink: https://bugs.launchpad.net/bugs/1798539 commit 9c29c318 upstream. If a spinner is present, there is a chance that the load of rwsem_has_spinner() in rwsem_wake() can be reordered with respect to decrement of rwsem count in __up_write() leading to wakeup being missed: spinning writer up_write caller --------------- ----------------------- [S] osq_unlock() [L] osq spin_lock(wait_lock) sem->count=0xFFFFFFFF00000001 +0xFFFFFFFF00000000 count=sem->count MB sem->count=0xFFFFFFFE00000001 -0xFFFFFFFF00000001 spin_trylock(wait_lock) return rwsem_try_write_lock(count) spin_unlock(wait_lock) schedule() Reordering of atomic_long_sub_return_release() in __up_write() and rwsem_has_spinner() in rwsem_wake() can cause missing of wakeup in up_write() context. In spinning writer, sem->count and local variable count is 0XFFFFFFFE00000001. It would result in rwsem_try_write_lock() failing to acquire rwsem and spinning writer going to sleep in rwsem_down_write_failed(). The smp_rmb() will make sure that the spinner state is consulted after sem->count is updated in up_write context. Signed-off-by:
-
Tejun Heo authored
BugLink: https://bugs.launchpad.net/bugs/1798539 commit e00f4f4d upstream. blkcg allocates some per-cgroup data structures with GFP_NOWAIT and when that fails falls back to operations which aren't specific to the cgroup. Occassional failures are expected under pressure and falling back to non-cgroup operation is the right thing to do. Unfortunately, I forgot to add __GFP_NOWARN to these allocations and these expected failures end up creating a lot of noise. Add __GFP_NOWARN. Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by:
Marc MERLIN <marc@merlins.org> Reported-by:
Vlastimil Babka <vbabka@suse.cz> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Daniel Micay authored
BugLink: https://bugs.launchpad.net/bugs/1798539 commit 88a5b39b upstream. Noticed by FORTIFY_SOURCE, this swaps memcpy() for strncpy() to zero-value fill the end of the buffer instead of over-reading a string from .rodata. Signed-off-by:
Daniel Micay <danielmicay@gmail.com> [kees: wrote commit log] Signed-off-by:
Kees Cook <keescook@chromium.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Wayne Porter <wporter82@gmail.com> Signed-off-by:
-
Jia-Ju Bai authored
BugLink: https://bugs.launchpad.net/bugs/1798539 commit 498c4b4e upstream. The driver may sleep under a spin lock, and the function call path is: rtsx_exclusive_enter_ss (acquire the lock by spin_lock) rtsx_enter_ss rtsx_power_off_card xd_cleanup_work xd_delay_write xd_finish_write xd_copy_page wait_timeout schedule_timeout --> may sleep To fix it, "wait_timeout" is replaced with mdelay in xd_copy_page. Signed-off-by:
Jia-Ju Bai <baijiaju1990@163.com> Signed-off-by:
-
Vegard Nossum authored
BugLink: https://bugs.launchpad.net/bugs/1798539 commit b0f5a8f3 upstream. This fixes a regression in commit 4d6501dc where I didn't notice that MIPS and OpenRISC were reinitialising p->{set,clear}_child_tid to NULL after our initialisation in copy_process(). We can simply get rid of the arch-specific initialisation here since it is now always done in copy_process() before hitting copy_thread{,_tls}(). Review notes: - As far as I can tell, copy_process() is the only user of copy_thread_tls(), which is the only caller of copy_thread() for architectures that don't implement copy_thread_tls(). - After this patch, there is no arch-specific code touching p->set_child_tid or p->clear_child_tid whatsoever. - It may look like MIPS/OpenRISC wanted to always have these fields be NULL, but that's not true, as copy_process() would unconditionally set them again _after_ calling copy_thread_tls() before commit 4d6501dc. Fixes: 4d6501dc ("kthread: Fix use-after-free if kthread fork fails") Reported-by:
Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> # MIPS only Acked-by:
Stafford Horne <shorne@gmail.com> Acked-by:
Oleg Nesterov <oleg@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: Jonas Bonn <jonas@southpole.se> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: openrisc@lists.librecores.org Cc: Jamie Iles <jamie.iles@oracle.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Vegard Nossum authored
BugLink: https://bugs.launchpad.net/bugs/1798539 commit 4d6501dc upstream. If a kthread forks (e.g. usermodehelper since commit 1da5c46f) but fails in copy_process() between calling dup_task_struct() and setting p->set_child_tid, then the value of p->set_child_tid will be inherited from the parent and get prematurely freed by free_kthread_struct(). kthread() - worker_thread() - process_one_work() | - call_usermodehelper_exec_work() | - kernel_thread() | - _do_fork() | - copy_process() | - dup_task_struct() | - arch_dup_task_struct() | - tsk->set_child_tid = current->set_child_tid // implied | - ... | - goto bad_fork_* | - ... | - free_task(tsk) | - free_kthread_struct(tsk) | - kfree(tsk->set_child_tid) - ... - schedule() - __schedule() - wq_worker_sleeping() - kthread_data(task)->flags // UAF The problem started showing up with commit 1da5c46f since it reused ->set_child_tid for the kthread worker data. A better long-term solution might be to get rid of the ->set_child_tid abuse. The comment in set_kthread_struct() also looks slightly wrong. Debugged-by:
Jamie Iles <jamie.iles@oracle.com> Fixes: 1da5c46f ("kthread: Make struct kthread kmalloc'ed") Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Ritesh Harjani authored
BugLink: https://bugs.launchpad.net/bugs/1798539 commit b3193bc0 upstream. In below scenario blkio cgroup does not work as per their assigned weights :- 1. When the underlying device is nonrotational with a single HW queue with depth of >= CFQ_HW_QUEUE_MIN 2. When the use case is forming two blkio cgroups cg1(weight 1000) & cg2(wight 100) and two processes(file1 and file2) doing sync IO in their respective blkio cgroups. For above usecase result of fio (without this patch):- file1: (groupid=0, jobs=1): err= 0: pid=685: Thu Jan 1 19:41:49 1970 write: IOPS=1315, BW=41.1MiB/s (43.1MB/s)(1024MiB/24906msec) <...> file2: (groupid=0, jobs=1): err= 0: pid=686: Thu Jan 1 19:41:49 1970 write: IOPS=1295, BW=40.5MiB/s (42.5MB/s)(1024MiB/25293msec) <...> // both the process BW is equal even though they belong to diff. cgroups with weight of 1000(cg1) and 100(cg2) In above case (for non rotational NCQ devices), as soon as the request from cg1 is completed and even though it is provided with higher set_slice=10, because of CFQ algorithm when the driver tries to fetch the request, CFQ expires this group without providing any idle time nor weight priority and schedules another cfq group (in this case cg2). And thus both cfq groups(cg1 & cg2) keep alternating to get the disk time and hence loses the cgroup weight based scheduling. Below patch gives a chance to cfq algorithm (cfq_arm_slice_timer) to arm the slice timer in case group_idle is enabled. In case if group_idle is also not required (including for nonrotational NCQ drives), we need to explicitly set group_idle = 0 from sysfs for such cases. With this patch result of fio(for above usecase) :- file1: (groupid=0, jobs=1): err= 0: pid=690: Thu Jan 1 00:06:08 1970 write: IOPS=1706, BW=53.3MiB/s (55.9MB/s)(1024MiB/19197msec) <..> file2: (groupid=0, jobs=1): err= 0: pid=691: Thu Jan 1 00:06:08 1970 write: IOPS=1043, BW=32.6MiB/s (34.2MB/s)(1024MiB/31401msec) <..> // In this processes BW is as per their respective cgroups weight. Signed-off-by:
Ritesh Harjani <riteshh@codeaurora.org> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1798539 commit 16037643 upstream. On AMD/ATI controllers, the HD-audio controller driver allows a bus reset upon the error recovery, and its procedure includes the cancellation of pending jack polling work as found in snd_hda_bus_codec_reset(). This works usually fine, but it becomes a problem when the reset happens from the jack poll work itself; then calling cancel_work_sync() from the work being processed tries to wait the finish endlessly. As a workaround, this patch adds the check of current_work() and applies the cancel_work_sync() only when it's not from the jackpoll_work. This doesn't fix the root cause of the reported error below, but at least, it eases the unexpected stall of the whole system. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200937 Cc: <stable@vger.kernel.org> Cc: Lukas Wunner <lukas@wunner.de> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Felipe Balbi authored
BugLink: https://bugs.launchpad.net/bugs/1798539 commit 851a1511 upstream. DNV's iTCO is slightly different with SMBCTRL sitting at a different offset when compared to all other devices. Let's fix so that we can properly use iTCO watchdog. Fixes: 84d7f2eb ("i2c: i801: Add support for Intel DNV") Cc: <stable@vger.kernel.org> # v4.4+ Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Reviewed-by:
Jean Delvare <jdelvare@suse.de> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Shubhrajyoti Datta authored
BugLink: https://bugs.launchpad.net/bugs/1798539 commit ae7304c3 upstream. Disable interrupts while configuring the transfer and enable them back. We have below as the programming sequence 1. start and slave address 2. byte count and stop In some customer platform there was a lot of interrupts between 1 and 2 and after slave address (around 7 clock cyles) if 2 is not executed then the transaction is nacked. To fix this case make the 2 writes atomic. Signed-off-by:
Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by:
Michal Simek <michal.simek@xilinx.com> [wsa: added a newline for better readability] Signed-off-by:
-
Greg Kroah-Hartman authored
BugLink: https://bugs.launchpad.net/bugs/1797563Signed-off-by:
-
Ethan Lien authored
BugLink: https://bugs.launchpad.net/bugs/1797563 commit d814a491 upstream. We use customized, nodesize batch value to update dirty_metadata_bytes. We should also use batch version of compare function or we will easily goto fast path and get false result from percpu_counter_compare(). Fixes: e2d84521 ("Btrfs: use percpu counter for dirty metadata count") CC: stable@vger.kernel.org # 4.4+ Signed-off-by:
Ethan Lien <ethanlien@synology.com> Reviewed-by:
Nikolay Borisov <nborisov@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com> nb: Rebased on 4.4.y ] Signed-off-by:
-
Gustavo A. R. Silva authored
BugLink: https://bugs.launchpad.net/bugs/1797563 commit ad0eaee6 upstream. Add missing break statement in order to prevent the code from falling through to the default case. Addresses-Coverity-ID: 115050 ("Missing break in switch") Reported-by:
Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org [Gustavo: Backported to 3.16..4.18 - Remove code comment removal] Signed-off-by:
-
Tomas Winkler authored
BugLink: https://bugs.launchpad.net/bugs/1797563 commit cc365dcf upstream. >From the pci power documentation: "The driver itself should not call pm_runtime_allow(), though. Instead, it should let user space or some platform-specific code do that (user space can do it via sysfs as stated above)..." However, the S0ix residency cannot be reached without MEI device getting into low power state. Hence, for mei devices that support D0i3, it's better to make runtime power management mandatory and not rely on the system integration such as udev rules. This policy cannot be applied globally as some older platforms were found to have broken power management. Cc: <stable@vger.kernel.org> v4.13+ Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Reviewed-by:
Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by:
-
Nikolay Aleksandrov authored
BugLink: https://bugs.launchpad.net/bugs/1797563 commit c2d6511e upstream. sch_tbf calls qdisc_watchdog_cancel() in both its ->reset and ->destroy callbacks but it may fail before the timer is initialized due to missing options (either not supplied by user-space or set as a default qdisc), also q->qdisc is used by ->reset and ->destroy so we need it initialized. Reproduce: $ sysctl net.core.default_qdisc=tbf $ ip l set ethX up Crash log: [ 959.160172] BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 [ 959.160323] IP: qdisc_reset+0xa/0x5c [ 959.160400] PGD 59cdb067 [ 959.160401] P4D 59cdb067 [ 959.160466] PUD 59ccb067 [ 959.160532] PMD 0 [ 959.160597] [ 959.160706] Oops: 0000 [#1] SMP [ 959.160778] Modules linked in: sch_tbf sch_sfb sch_prio sch_netem [ 959.160891] CPU: 2 PID: 1562 Comm: ip Not tainted 4.13.0-rc6+ #62 [ 959.160998] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 959.161157] task: ffff880059c9a700 task.stack: ffff8800376d0000 [ 959.161263] RIP: 0010:qdisc_reset+0xa/0x5c [ 959.161347] RSP: 0018:ffff8800376d3610 EFLAGS: 00010286 [ 959.161531] RAX: ffffffffa001b1dd RBX: ffff8800373a2800 RCX: 0000000000000000 [ 959.161733] RDX: ffffffff8215f160 RSI: ffffffff8215f160 RDI: 0000000000000000 [ 959.161939] RBP: ffff8800376d3618 R08: 00000000014080c0 R09: 00000000ffffffff [ 959.162141] R10: ffff8800376d3578 R11: 0000000000000020 R12: ffffffffa001d2c0 [ 959.162343] R13: ffff880037538000 R14: 00000000ffffffff R15: 0000000000000001 [ 959.162546] FS: 00007fcc5126b740(0000) GS:ffff88005d900000(0000) knlGS:0000000000000000 [ 959.162844] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 959.163030] CR2: 0000000000000018 CR3: 000000005abc4000 CR4: 00000000000406e0 [ 959.163233] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 959.163436] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 959.163638] Call Trace: [ 959.163788] tbf_reset+0x19/0x64 [sch_tbf] [ 959.163957] qdisc_destroy+0x8b/0xe5 [ 959.164119] qdisc_create_dflt+0x86/0x94 [ 959.164284] ? dev_activate+0x129/0x129 [ 959.164449] attach_one_default_qdisc+0x36/0x63 [ 959.164623] netdev_for_each_tx_queue+0x3d/0x48 [ 959.164795] dev_activate+0x4b/0x129 [ 959.164957] __dev_open+0xe7/0x104 [ 959.165118] __dev_change_flags+0xc6/0x15c [ 959.165287] dev_change_flags+0x25/0x59 [ 959.165451] do_setlink+0x30c/0xb3f [ 959.165613] ? check_chain_key+0xb0/0xfd [ 959.165782] rtnl_newlink+0x3a4/0x729 [ 959.165947] ? rtnl_newlink+0x117/0x729 [ 959.166121] ? ns_capable_common+0xd/0xb1 [ 959.166288] ? ns_capable+0x13/0x15 [ 959.166450] rtnetlink_rcv_msg+0x188/0x197 [ 959.166617] ? rcu_read_unlock+0x3e/0x5f [ 959.166783] ? rtnl_newlink+0x729/0x729 [ 959.166948] netlink_rcv_skb+0x6c/0xce [ 959.167113] rtnetlink_rcv+0x23/0x2a [ 959.167273] netlink_unicast+0x103/0x181 [ 959.167439] netlink_sendmsg+0x326/0x337 [ 959.167607] sock_sendmsg_nosec+0x14/0x3f [ 959.167772] sock_sendmsg+0x29/0x2e [ 959.167932] ___sys_sendmsg+0x209/0x28b [ 959.168098] ? do_raw_spin_unlock+0xcd/0xf8 [ 959.168267] ? _raw_spin_unlock+0x27/0x31 [ 959.168432] ? __handle_mm_fault+0x651/0xdb1 [ 959.168602] ? check_chain_key+0xb0/0xfd [ 959.168773] __sys_sendmsg+0x45/0x63 [ 959.168934] ? __sys_sendmsg+0x45/0x63 [ 959.169100] SyS_sendmsg+0x19/0x1b [ 959.169260] entry_SYSCALL_64_fastpath+0x23/0xc2 [ 959.169432] RIP: 0033:0x7fcc5097e690 [ 959.169592] RSP: 002b:00007ffd0d5c7b48 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 959.169887] RAX: ffffffffffffffda RBX: ffffffff810d278c RCX: 00007fcc5097e690 [ 959.170089] RDX: 0000000000000000 RSI: 00007ffd0d5c7b90 RDI: 0000000000000003 [ 959.170292] RBP: ffff8800376d3f98 R08: 0000000000000001 R09: 0000000000000003 [ 959.170494] R10: 00007ffd0d5c7910 R11: 0000000000000246 R12: 0000000000000006 [ 959.170697] R13: 000000000066f1a0 R14: 00007ffd0d5cfc40 R15: 0000000000000000 [ 959.170900] ? trace_hardirqs_off_caller+0xa7/0xcf [ 959.171076] Code: 00 41 c7 84 24 14 01 00 00 00 00 00 00 41 c7 84 24 98 00 00 00 00 00 00 00 41 5c 41 5d 41 5e 5d c3 66 66 66 66 90 55 48 89 e5 53 <48> 8b 47 18 48 89 fb 48 8b 40 48 48 85 c0 74 02 ff d0 48 8b bb [ 959.171637] RIP: qdisc_reset+0xa/0x5c RSP: ffff8800376d3610 [ 959.171821] CR2: 0000000000000018 Fixes: 87b60cfa ("net_sched: fix error recovery at qdisc creation") Fixes: 0fbbeb1b ("[PKT_SCHED]: Fix missing qdisc_destroy() in qdisc_create_dflt()") Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Nikolay Aleksandrov authored
BugLink: https://bugs.launchpad.net/bugs/1797563 commit 634576a1 upstream. netem can fail in ->init due to missing options (either not supplied by user-space or used as a default qdisc) causing a timer->base null pointer deref in its ->destroy() and ->reset() callbacks. Reproduce: $ sysctl net.core.default_qdisc=netem $ ip l set ethX up Crash log: [ 1814.846943] BUG: unable to handle kernel NULL pointer dereference at (null) [ 1814.847181] IP: hrtimer_active+0x17/0x8a [ 1814.847270] PGD 59c34067 [ 1814.847271] P4D 59c34067 [ 1814.847337] PUD 37374067 [ 1814.847403] PMD 0 [ 1814.847468] [ 1814.847582] Oops: 0000 [#1] SMP [ 1814.847655] Modules linked in: sch_netem(O) sch_fq_codel(O) [ 1814.847761] CPU: 3 PID: 1573 Comm: ip Tainted: G O 4.13.0-rc6+ #62 [ 1814.847884] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 1814.848043] task: ffff88003723a700 task.stack: ffff88005adc8000 [ 1814.848235] RIP: 0010:hrtimer_active+0x17/0x8a [ 1814.848407] RSP: 0018:ffff88005adcb590 EFLAGS: 00010246 [ 1814.848590] RAX: 0000000000000000 RBX: ffff880058e359d8 RCX: 0000000000000000 [ 1814.848793] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff880058e359d8 [ 1814.848998] RBP: ffff88005adcb5b0 R08: 00000000014080c0 R09: 00000000ffffffff [ 1814.849204] R10: ffff88005adcb660 R11: 0000000000000020 R12: 0000000000000000 [ 1814.849410] R13: ffff880058e359d8 R14: 00000000ffffffff R15: 0000000000000001 [ 1814.849616] FS: 00007f733bbca740(0000) GS:ffff88005d980000(0000) knlGS:0000000000000000 [ 1814.849919] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1814.850107] CR2: 0000000000000000 CR3: 0000000059f0d000 CR4: 00000000000406e0 [ 1814.850313] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1814.850518] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1814.850723] Call Trace: [ 1814.850875] hrtimer_try_to_cancel+0x1a/0x93 [ 1814.851047] hrtimer_cancel+0x15/0x20 [ 1814.851211] qdisc_watchdog_cancel+0x12/0x14 [ 1814.851383] netem_reset+0xe6/0xed [sch_netem] [ 1814.851561] qdisc_destroy+0x8b/0xe5 [ 1814.851723] qdisc_create_dflt+0x86/0x94 [ 1814.851890] ? dev_activate+0x129/0x129 [ 1814.852057] attach_one_default_qdisc+0x36/0x63 [ 1814.852232] netdev_for_each_tx_queue+0x3d/0x48 [ 1814.852406] dev_activate+0x4b/0x129 [ 1814.852569] __dev_open+0xe7/0x104 [ 1814.852730] __dev_change_flags+0xc6/0x15c [ 1814.852899] dev_change_flags+0x25/0x59 [ 1814.853064] do_setlink+0x30c/0xb3f [ 1814.853228] ? check_chain_key+0xb0/0xfd [ 1814.853396] ? check_chain_key+0xb0/0xfd [ 1814.853565] rtnl_newlink+0x3a4/0x729 [ 1814.853728] ? rtnl_newlink+0x117/0x729 [ 1814.853905] ? ns_capable_common+0xd/0xb1 [ 1814.854072] ? ns_capable+0x13/0x15 [ 1814.854234] rtnetlink_rcv_msg+0x188/0x197 [ 1814.854404] ? rcu_read_unlock+0x3e/0x5f [ 1814.854572] ? rtnl_newlink+0x729/0x729 [ 1814.854737] netlink_rcv_skb+0x6c/0xce [ 1814.854902] rtnetlink_rcv+0x23/0x2a [ 1814.855064] netlink_unicast+0x103/0x181 [ 1814.855230] netlink_sendmsg+0x326/0x337 [ 1814.855398] sock_sendmsg_nosec+0x14/0x3f [ 1814.855584] sock_sendmsg+0x29/0x2e [ 1814.855747] ___sys_sendmsg+0x209/0x28b [ 1814.855912] ? do_raw_spin_unlock+0xcd/0xf8 [ 1814.856082] ? _raw_spin_unlock+0x27/0x31 [ 1814.856251] ? __handle_mm_fault+0x651/0xdb1 [ 1814.856421] ? check_chain_key+0xb0/0xfd [ 1814.856592] __sys_sendmsg+0x45/0x63 [ 1814.856755] ? __sys_sendmsg+0x45/0x63 [ 1814.856923] SyS_sendmsg+0x19/0x1b [ 1814.857083] entry_SYSCALL_64_fastpath+0x23/0xc2 [ 1814.857256] RIP: 0033:0x7f733b2dd690 [ 1814.857419] RSP: 002b:00007ffe1d3387d8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 1814.858238] RAX: ffffffffffffffda RBX: ffffffff810d278c RCX: 00007f733b2dd690 [ 1814.858445] RDX: 0000000000000000 RSI: 00007ffe1d338820 RDI: 0000000000000003 [ 1814.858651] RBP: ffff88005adcbf98 R08: 0000000000000001 R09: 0000000000000003 [ 1814.858856] R10: 00007ffe1d3385a0 R11: 0000000000000246 R12: 0000000000000002 [ 1814.859060] R13: 000000000066f1a0 R14: 00007ffe1d3408d0 R15: 0000000000000000 [ 1814.859267] ? trace_hardirqs_off_caller+0xa7/0xcf [ 1814.859446] Code: 10 55 48 89 c7 48 89 e5 e8 45 a1 fb ff 31 c0 5d c3 31 c0 c3 66 66 66 66 90 55 48 89 e5 41 56 41 55 41 54 53 49 89 fd 49 8b 45 30 <4c> 8b 20 41 8b 5c 24 38 31 c9 31 d2 48 c7 c7 50 8e 1d 82 41 89 [ 1814.860022] RIP: hrtimer_active+0x17/0x8a RSP: ffff88005adcb590 [ 1814.860214] CR2: 0000000000000000 Fixes: 87b60cfa ("net_sched: fix error recovery at qdisc creation") Fixes: 0fbbeb1b ("[PKT_SCHED]: Fix missing qdisc_destroy() in qdisc_create_dflt()") Signed-off-by:
-
Nikolay Aleksandrov authored
BugLink: https://bugs.launchpad.net/bugs/1797563 commit 32db864d upstream. If sch_hhf fails in its ->init() function (either due to wrong user-space arguments as below or memory alloc failure of hh_flows) it will do a null pointer deref of q->hh_flows in its ->destroy() function. To reproduce the crash: $ tc qdisc add dev eth0 root hhf quantum 2000000 non_hh_weight 10000000 Crash log: [ 690.654882] BUG: unable to handle kernel NULL pointer dereference at (null) [ 690.655565] IP: hhf_destroy+0x48/0xbc [ 690.655944] PGD 37345067 [ 690.655948] P4D 37345067 [ 690.656252] PUD 58402067 [ 690.656554] PMD 0 [ 690.656857] [ 690.657362] Oops: 0000 [#1] SMP [ 690.657696] Modules linked in: [ 690.658032] CPU: 3 PID: 920 Comm: tc Not tainted 4.13.0-rc6+ #57 [ 690.658525] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 690.659255] task: ffff880058578000 task.stack: ffff88005acbc000 [ 690.659747] RIP: 0010:hhf_destroy+0x48/0xbc [ 690.660146] RSP: 0018:ffff88005acbf9e0 EFLAGS: 00010246 [ 690.660601] RAX: 0000000000000000 RBX: 0000000000000020 RCX: 0000000000000000 [ 690.661155] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffffffff821f63f0 [ 690.661710] RBP: ffff88005acbfa08 R08: ffffffff81b10a90 R09: 0000000000000000 [ 690.662267] R10: 00000000f42b7019 R11: ffff880058578000 R12: 00000000ffffffea [ 690.662820] R13: ffff8800372f6400 R14: 0000000000000000 R15: 0000000000000000 [ 690.663769] FS: 00007f8ae5e8b740(0000) GS:ffff88005d980000(0000) knlGS:0000000000000000 [ 690.667069] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 690.667965] CR2: 0000000000000000 CR3: 0000000058523000 CR4: 00000000000406e0 [ 690.668918] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 690.669945] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 690.671003] Call Trace: [ 690.671743] qdisc_create+0x377/0x3fd [ 690.672534] tc_modify_qdisc+0x4d2/0x4fd [ 690.673324] rtnetlink_rcv_msg+0x188/0x197 [ 690.674204] ? rcu_read_unlock+0x3e/0x5f [ 690.675091] ? rtnl_newlink+0x729/0x729 [ 690.675877] netlink_rcv_skb+0x6c/0xce [ 690.676648] rtnetlink_rcv+0x23/0x2a [ 690.677405] netlink_unicast+0x103/0x181 [ 690.678179] netlink_sendmsg+0x326/0x337 [ 690.678958] sock_sendmsg_nosec+0x14/0x3f [ 690.679743] sock_sendmsg+0x29/0x2e [ 690.680506] ___sys_sendmsg+0x209/0x28b [ 690.681283] ? __handle_mm_fault+0xc7d/0xdb1 [ 690.681915] ? check_chain_key+0xb0/0xfd [ 690.682449] __sys_sendmsg+0x45/0x63 [ 690.682954] ? __sys_sendmsg+0x45/0x63 [ 690.683471] SyS_sendmsg+0x19/0x1b [ 690.683974] entry_SYSCALL_64_fastpath+0x23/0xc2 [ 690.684516] RIP: 0033:0x7f8ae529d690 [ 690.685016] RSP: 002b:00007fff26d2d6b8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 690.685931] RAX: ffffffffffffffda RBX: ffffffff810d278c RCX: 00007f8ae529d690 [ 690.686573] RDX: 0000000000000000 RSI: 00007fff26d2d700 RDI: 0000000000000003 [ 690.687047] RBP: ffff88005acbff98 R08: 0000000000000001 R09: 0000000000000000 [ 690.687519] R10: 00007fff26d2d480 R11: 0000000000000246 R12: 0000000000000002 [ 690.687996] R13: 0000000001258070 R14: 0000000000000001 R15: 0000000000000000 [ 690.688475] ? trace_hardirqs_off_caller+0xa7/0xcf [ 690.688887] Code: 00 00 e8 2a 02 ae ff 49 8b bc 1d 60 02 00 00 48 83 c3 08 e8 19 02 ae ff 48 83 fb 20 75 dc 45 31 f6 4d 89 f7 4d 03 bd 20 02 00 00 <49> 8b 07 49 39 c7 75 24 49 83 c6 10 49 81 fe 00 40 00 00 75 e1 [ 690.690200] RIP: hhf_destroy+0x48/0xbc RSP: ffff88005acbf9e0 [ 690.690636] CR2: 0000000000000000 Fixes: 87b60cfa ("net_sched: fix error recovery at qdisc creation") Fixes: 10239edf ("net-qdisc-hhf: Heavy-Hitter Filter (HHF) qdisc") Signed-off-by:
-
Nikolay Aleksandrov authored
BugLink: https://bugs.launchpad.net/bugs/1797563 commit e89d469e upstream. The below commit added a call to ->destroy() on init failure, but multiq still frees ->queues on error in init, but ->queues is also freed by ->destroy() thus we get double free and corrupted memory. Very easy to reproduce (eth0 not multiqueue): $ tc qdisc add dev eth0 root multiq RTNETLINK answers: Operation not supported $ ip l add dumdum type dummy (crash) Trace log: [ 3929.467747] general protection fault: 0000 [#1] SMP [ 3929.468083] Modules linked in: [ 3929.468302] CPU: 3 PID: 967 Comm: ip Not tainted 4.13.0-rc6+ #56 [ 3929.468625] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 3929.469124] task: ffff88003716a700 task.stack: ffff88005872c000 [ 3929.469449] RIP: 0010:__kmalloc_track_caller+0x117/0x1be [ 3929.469746] RSP: 0018:ffff88005872f6a0 EFLAGS: 00010246 [ 3929.470042] RAX: 00000000000002de RBX: 0000000058a59000 RCX: 00000000000002df [ 3929.470406] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff821f7020 [ 3929.470770] RBP: ffff88005872f6e8 R08: 000000000001f010 R09: 0000000000000000 [ 3929.471133] R10: ffff88005872f730 R11: 0000000000008cdd R12: ff006d75646d7564 [ 3929.471496] R13: 00000000014000c0 R14: ffff88005b403c00 R15: ffff88005b403c00 [ 3929.471869] FS: 00007f0b70480740(0000) GS:ffff88005d980000(0000) knlGS:0000000000000000 [ 3929.472286] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3929.472677] CR2: 00007ffcee4f3000 CR3: 0000000059d45000 CR4: 00000000000406e0 [ 3929.473209] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 3929.474109] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 3929.474873] Call Trace: [ 3929.475337] ? kstrdup_const+0x23/0x25 [ 3929.475863] kstrdup+0x2e/0x4b [ 3929.476338] kstrdup_const+0x23/0x25 [ 3929.478084] __kernfs_new_node+0x28/0xbc [ 3929.478478] kernfs_new_node+0x35/0x55 [ 3929.478929] kernfs_create_link+0x23/0x76 [ 3929.479478] sysfs_do_create_link_sd.isra.2+0x85/0xd7 [ 3929.480096] sysfs_create_link+0x33/0x35 [ 3929.480649] device_add+0x200/0x589 [ 3929.481184] netdev_register_kobject+0x7c/0x12f [ 3929.481711] register_netdevice+0x373/0x471 [ 3929.482174] rtnl_newlink+0x614/0x729 [ 3929.482610] ? rtnl_newlink+0x17f/0x729 [ 3929.483080] rtnetlink_rcv_msg+0x188/0x197 [ 3929.483533] ? rcu_read_unlock+0x3e/0x5f [ 3929.483984] ? rtnl_newlink+0x729/0x729 [ 3929.484420] netlink_rcv_skb+0x6c/0xce [ 3929.484858] rtnetlink_rcv+0x23/0x2a [ 3929.485291] netlink_unicast+0x103/0x181 [ 3929.485735] netlink_sendmsg+0x326/0x337 [ 3929.486181] sock_sendmsg_nosec+0x14/0x3f [ 3929.486614] sock_sendmsg+0x29/0x2e [ 3929.486973] ___sys_sendmsg+0x209/0x28b [ 3929.487340] ? do_raw_spin_unlock+0xcd/0xf8 [ 3929.487719] ? _raw_spin_unlock+0x27/0x31 [ 3929.488092] ? __handle_mm_fault+0x651/0xdb1 [ 3929.488471] ? check_chain_key+0xb0/0xfd [ 3929.488847] __sys_sendmsg+0x45/0x63 [ 3929.489206] ? __sys_sendmsg+0x45/0x63 [ 3929.489576] SyS_sendmsg+0x19/0x1b [ 3929.489901] entry_SYSCALL_64_fastpath+0x23/0xc2 [ 3929.490172] RIP: 0033:0x7f0b6fb93690 [ 3929.490423] RSP: 002b:00007ffcee4ed588 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 3929.490881] RAX: ffffffffffffffda RBX: ffffffff810d278c RCX: 00007f0b6fb93690 [ 3929.491198] RDX: 0000000000000000 RSI: 00007ffcee4ed5d0 RDI: 0000000000000003 [ 3929.491521] RBP: ffff88005872ff98 R08: 0000000000000001 R09: 0000000000000000 [ 3929.491801] R10: 00007ffcee4ed350 R11: 0000000000000246 R12: 0000000000000002 [ 3929.492075] R13: 000000000066f1a0 R14: 00007ffcee4f5680 R15: 0000000000000000 [ 3929.492352] ? trace_hardirqs_off_caller+0xa7/0xcf [ 3929.492590] Code: 8b 45 c0 48 8b 45 b8 74 17 48 8b 4d c8 83 ca ff 44 89 ee 4c 89 f7 e8 83 ca ff ff 49 89 c4 eb 49 49 63 56 20 48 8d 48 01 4d 8b 06 <49> 8b 1c 14 48 89 c2 4c 89 e0 65 49 0f c7 08 0f 94 c0 83 f0 01 [ 3929.493335] RIP: __kmalloc_track_caller+0x117/0x1be RSP: ffff88005872f6a0 Fixes: 87b60cfa ("net_sched: fix error recovery at qdisc creation") Fixes: f07d1501 ("multiq: Further multiqueue cleanup") Signed-off-by:
-
Nikolay Aleksandrov authored
BugLink: https://bugs.launchpad.net/bugs/1797563 commit 88c2ace6 upstream. The commit below added a call to the ->destroy() callback for all qdiscs which failed in their ->init(), but some were not prepared for such change and can't handle partially initialized qdisc. HTB is one of them and if any error occurs before the qdisc watchdog timer and qdisc work are initialized then we can hit either a null ptr deref (timer->base) when canceling in ->destroy or lockdep error info about trying to register a non-static key and a stack dump. So to fix these two move the watchdog timer and workqueue init before anything that can err out. To reproduce userspace needs to send broken htb qdisc create request, tested with a modified tc (q_htb.c). Trace log: [ 2710.897602] BUG: unable to handle kernel NULL pointer dereference at (null) [ 2710.897977] IP: hrtimer_active+0x17/0x8a [ 2710.898174] PGD 58fab067 [ 2710.898175] P4D 58fab067 [ 2710.898353] PUD 586c0067 [ 2710.898531] PMD 0 [ 2710.898710] [ 2710.899045] Oops: 0000 [#1] SMP [ 2710.899232] Modules linked in: [ 2710.899419] CPU: 1 PID: 950 Comm: tc Not tainted 4.13.0-rc6+ #54 [ 2710.899646] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 2710.900035] task: ffff880059ed2700 task.stack: ffff88005ad4c000 [ 2710.900262] RIP: 0010:hrtimer_active+0x17/0x8a [ 2710.900467] RSP: 0018:ffff88005ad4f960 EFLAGS: 00010246 [ 2710.900684] RAX: 0000000000000000 RBX: ffff88003701e298 RCX: 0000000000000000 [ 2710.900933] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88003701e298 [ 2710.901177] RBP: ffff88005ad4f980 R08: 0000000000000001 R09: 0000000000000001 [ 2710.901419] R10: ffff88005ad4f800 R11: 0000000000000400 R12: 0000000000000000 [ 2710.901663] R13: ffff88003701e298 R14: ffffffff822a4540 R15: ffff88005ad4fac0 [ 2710.901907] FS: 00007f2f5e90f740(0000) GS:ffff88005d880000(0000) knlGS:0000000000000000 [ 2710.902277] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2710.902500] CR2: 0000000000000000 CR3: 0000000058ca3000 CR4: 00000000000406e0 [ 2710.902744] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 2710.902977] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 2710.903180] Call Trace: [ 2710.903332] hrtimer_try_to_cancel+0x1a/0x93 [ 2710.903504] hrtimer_cancel+0x15/0x20 [ 2710.903667] qdisc_watchdog_cancel+0x12/0x14 [ 2710.903866] htb_destroy+0x2e/0xf7 [ 2710.904097] qdisc_create+0x377/0x3fd [ 2710.904330] tc_modify_qdisc+0x4d2/0x4fd [ 2710.904511] rtnetlink_rcv_msg+0x188/0x197 [ 2710.904682] ? rcu_read_unlock+0x3e/0x5f [ 2710.904849] ? rtnl_newlink+0x729/0x729 [ 2710.905017] netlink_rcv_skb+0x6c/0xce [ 2710.905183] rtnetlink_rcv+0x23/0x2a [ 2710.905345] netlink_unicast+0x103/0x181 [ 2710.905511] netlink_sendmsg+0x326/0x337 [ 2710.905679] sock_sendmsg_nosec+0x14/0x3f [ 2710.905847] sock_sendmsg+0x29/0x2e [ 2710.906010] ___sys_sendmsg+0x209/0x28b [ 2710.906176] ? do_raw_spin_unlock+0xcd/0xf8 [ 2710.906346] ? _raw_spin_unlock+0x27/0x31 [ 2710.906514] ? __handle_mm_fault+0x651/0xdb1 [ 2710.906685] ? check_chain_key+0xb0/0xfd [ 2710.906855] __sys_sendmsg+0x45/0x63 [ 2710.907018] ? __sys_sendmsg+0x45/0x63 [ 2710.907185] SyS_sendmsg+0x19/0x1b [ 2710.907344] entry_SYSCALL_64_fastpath+0x23/0xc2 Note that probably this bug goes further back because the default qdisc handling always calls ->destroy on init failure too. Fixes: 87b60cfa ("net_sched: fix error recovery at qdisc creation") Fixes: 0fbbeb1b ("[PKT_SCHED]: Fix missing qdisc_destroy() in qdisc_create_dflt()") Signed-off-by:
-
Miklos Szeredi authored
BugLink: https://bugs.launchpad.net/bugs/1797563 commit eea2fb48 upstream. When mounting overlayfs it needs a clean "work" directory under the supplied workdir. Previously the mount code removed this directory if it already existed and created a new one. If the removal failed (e.g. directory was not empty) then it fell back to a read-only mount not using the workdir. While this has never been reported, it is possible to get a non-empty "work" dir from a previous mount of overlayfs in case of crash in the middle of an operation using the work directory. In this case the left over state should be discarded and the overlay filesystem will be consistent, guaranteed by the atomicity of operations on moving to/from the workdir to the upper layer. This patch implements cleaning out any files left in workdir. It is implemented using real recursion for simplicity, but the depth is limited to 2, because the worst case is that of a directory containing whiteouts under "work". Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by:
SZ Lin (林上智) <sz.lin@moxa.com> Signed-off-by:
-
Antonio Murdaca authored
BugLink: https://bugs.launchpad.net/bugs/1797563 commit 3fe6e52f upstream. In user namespace the whiteout creation fails with -EPERM because the current process isn't capable(CAP_SYS_ADMIN) when setting xattr. A simple reproducer: $ mkdir upper lower work merged lower/dir $ sudo mount -t overlay overlay -olowerdir=lower,upperdir=upper,workdir=work merged $ unshare -m -p -f -U -r bash Now as root in the user namespace: \# touch merged/dir/{1,2,3} # this will force a copy up of lower/dir \# rm -fR merged/* This ends up failing with -EPERM after the files in dir has been correctly deleted: unlinkat(4, "2", 0) = 0 unlinkat(4, "1", 0) = 0 unlinkat(4, "3", 0) = 0 close(4) = 0 unlinkat(AT_FDCWD, "merged/dir", AT_REMOVEDIR) = -1 EPERM (Operation not permitted) Interestingly, if you don't place files in merged/dir you can remove it, meaning if upper/dir does not exist, creating the char device file works properly in that same location. This patch uses ovl_sb_creator_cred() to get the cred struct from the superblock mounter and override the old cred with these new ones so that the whiteout creation is possible because overlay is wrong in assuming that the creds it will get with prepare_creds will be in the initial user namespace. The old cap_raise game is removed in favor of just overriding the old cred struct. This patch also drops from ovl_copy_up_one() the following two lines: override_cred->fsuid = stat->uid; override_cred->fsgid = stat->gid; This is because the correct uid and gid are taken directly with the stat struct and correctly set with ovl_set_attr(). Signed-off-by:
Antonio Murdaca <runcom@redhat.com> Signed-off-by:
-
Miklos Szeredi authored
BugLink: https://bugs.launchpad.net/bugs/1797563 commit 56656e96 upstream. The 'is_merge' is an historical naming from when only a single lower layer could exist. With the introduction of multiple lower layers the meaning of this flag was changed to mean only the "lowest layer" (while all lower layers were being merged). So now 'is_merge' is inaccurate and hence renaming to 'is_lowest' Signed-off-by:
-
Marc Zyngier authored
BugLink: https://bugs.launchpad.net/bugs/1797563 commit 327ebe1f upstream. The GIC has no such thing as interrupt 1020: the last valid ID is 1019, and the range 1020-1023 is reserved - 1023 indicating that no interrupt is pending. So let's make sure we don't try to handle this ID. This bug has been in since the initial GIC code was introduced in 8ad68bbf ("[ARM] Add support for ARM RealView board"). Reported-by:
Eric Auger <eric.auger@linaro.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by:
-
Marc Zyngier authored
BugLink: https://bugs.launchpad.net/bugs/1797563 commit 8f318526 upstream. Commit 1a1ebd5f ("irqchip/gic-v3: Make sure read from ICC_IAR1_EL1 is visible on redestributor") fixed the missing barrier on arm64, but forgot to update the 32bit counterpart, which has the same requirements. Let's fix it. Fixes: 1a1ebd5f ("irqchip/gic-v3: Make sure read from ICC_IAR1_EL1 is visible on redestributor") Signed-off-by:
-
Shanker Donthineni authored
BugLink: https://bugs.launchpad.net/bugs/1797563 commit 2eca0d6c upstream. Function its_alloc_tables() maintains two local variables, "order" and and "alloc_size", to hold memory size that has been allocated to ITS_BASEn. We don't always refresh the variable alloc_size whenever value of the variable order changes, causing the following two problems. - Cache flush operation with size more than required. - Information reported by pr_info is not correct. Use a helper macro that converts page order to size in bytes instead of variable "alloc_size" to fix both the problems. Signed-off-by:
Shanker Donthineni <shankerd@codeaurora.org> Signed-off-by:
-
Shanker Donthineni authored
BugLink: https://bugs.launchpad.net/bugs/1797563 commit 1a485f4d upstream. The current ITS driver has a memory leak in its_free_tables(). It happens on tear down path of the driver when its_probe() call fails. its_free_tables() should free the exact number of pages that have been allocated, not just a single page as current code does. This patch records the memory size for each ITS_BASERn at the time of page allocation and uses the same size information when freeing pages to fix the issue. Signed-off-by:
-
Marc Zyngier authored
BugLink: https://bugs.launchpad.net/bugs/1797563 commit 18aa60ce upstream. When the programming of a GITS_BASERn register fails because of an unsupported ITS page size, we retry it with a smaller page size. Unfortunately, we don't recompute the number of allocated ITS pages, indicating the wrong value computed in the original allocation. A convenient fix is to free the pages we allocated, update the page size, and restart the allocation. This will ensure that we always allocate the right amount in the case of a device table, specially if we have to reduce the allocation order to stay within the boundaries of the ITS maximum allocation. Reported-and-tested-by:
Ma Jun <majun258@huawei.com> Signed-off-by:
-
Sudeep Holla authored
BugLink: https://bugs.launchpad.net/bugs/1797563 commit a946e8c7 upstream. In case of a wakeup interrupt, irq_pm_check_wakeup disables the interrupt and marks it pending and suspended, disables it and notifies the pm core about the wake event. The interrupt gets handled later once the system is resumed. However the irq stats is updated twice: once when it's disabled waiting for the system to resume and later when it's handled, resulting in wrong counting of the wakeup interrupt when waking up the system. This patch updates the interrupt count so that it's updated only when the interrupt gets handled. It's already handled correctly in handle_edge_irq and handle_edge_eoi_irq. Reported-by:
Manoil Claudiu <claudiu.manoil@freescale.com> Signed-off-by:
Sudeep Holla <sudeep.holla@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Link: http://lkml.kernel.org/r/1446661957-1019-1-git-send-email-sudeep.holla@arm.comSigned-off-by:
-
Chas Williams authored
BugLink: https://bugs.launchpad.net/bugs/1797563 Commit cdbf9267 ("mm: numa: avoid waiting on freed migrated pages") was an incomplete backport of the upstream commit. It is necessary to always reset page_nid before attempting any early exit. The original commit conflicted due to lack of commit 82b0f8c3 ("mm: join struct fault_env and vm_fault") in 4.9 so it wasn't a clean application, and the change must have just gotten lost in the noise. Signed-off-by:
Chas Williams <chas3@att.com> Signed-off-by:
-
Govindarajulu Varadarajan authored
BugLink: https://bugs.launchpad.net/bugs/1797563 commit cb5c6568 upstream. In commit ab123fe0 ("enic: handle mtu change for vf properly") ASSERT_RTNL() is added to _enic_change_mtu() to prevent it from being called without rtnl held. enic_probe() calls enic_change_mtu() without rtnl held. At this point netdev is not registered yet. Remove call to enic_change_mtu and assign the mtu to netdev->mtu. Fixes: ab123fe0 ("enic: handle mtu change for vf properly") Signed-off-by:
Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by:
-
Fabio Estevam authored
BugLink: https://bugs.launchpad.net/bugs/1797563 This reverts commit 0d0af17a. This commit causes reboot to fail on imx6 wandboard, so let's revert it. Cc: <stable@vger.kernel.org> #4.4 Reported-by:
Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by:
Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by:
-
Randy Dunlap authored
BugLink: https://bugs.launchpad.net/bugs/1797563 commit 914b087f upstream. When $DEPMOD is not found, only print a warning instead of exiting with an error message and error status: Warning: 'make modules_install' requires /sbin/depmod. Please install it. This is probably in the kmod package. Change the Error to a Warning because "not all build hosts for cross compiling Linux are Linux systems and are able to provide a working port of depmod, especially at the file patch /sbin/depmod." I.e., "make modules_install" may be used to copy/install the loadable modules files to a target directory on a build system and then transferred to an embedded device where /sbin/depmod is run instead of it being run on the build system. Fixes: 934193a6 ("kbuild: verify that $DEPMOD is installed") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Reported-by:
H. Nikolaus Schaller <hns@goldelico.com> Cc: stable@vger.kernel.org Cc: Lucas De Marchi <lucas.demarchi@profusion.mobi> Cc: Lucas De Marchi <lucas.de.marchi@gmail.com> Cc: Michal Marek <michal.lkml@markovi.net> Cc: Jessica Yu <jeyu@kernel.org> Cc: Chih-Wei Huang <cwhuang@linux.org.tw> Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
Maxim Zhukov <mussitantesmortem@gmail.com> Signed-off-by:
-
Juergen Gross authored
BugLink: https://bugs.launchpad.net/bugs/1797563 commit b2d7a075 upstream. Using only 32-bit writes for the pte will result in an intermediate L1TF vulnerable PTE. When running as a Xen PV guest this will at once switch the guest to shadow mode resulting in a loss of performance. Use arch_atomic64_xchg() instead which will perform the requested operation atomically with all 64 bits. Some performance considerations according to: https://software.intel.com/sites/default/files/managed/ad/dc/Intel-Xeon-Scalable-Processor-throughput-latency.pdf The main number should be the latency, as there is no tight loop around native_ptep_get_and_clear(). "lock cmpxchg8b" has a latency of 20 cycles, while "lock xchg" (with a memory operand) isn't mentioned in that document. "lock xadd" (with xadd having 3 cycles less latency than xchg) has a latency of 11, so we can assume a latency of 14 for "lock xchg". Signed-off-by:
Juergen Gross <jgross@suse.com> Reviewed-by:
Jan Beulich <jbeulich@suse.com> Tested-by:
Jason Andryuk <jandryuk@gmail.com> Signed-off-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> [ Atomic operations gained an arch_ prefix in 8bf705d1 ("locking/atomic/x86: Switch atomic.h to use atomic-instrumented.h") so s/arch_atomic64_xchg/atomic64_xchg/ for backport.] Signed-off-by:
-
