- 09 Aug, 2023 30 commits
-
-
Ido Schimmel authored
Some test cases check that the group timer is (or isn't) 0. Instead of grepping for "0.00" grep for " 0.00" as the former can also match "260.00" which is the default group membership interval. Fixes: b6d00da0 ("selftests: forwarding: Add bridge MDB test") Reported-by:
Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Tested-by:
Hangbin Liu <liuhangbin@gmail.com> Acked-by:
Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20230808141503.4060661-18-idosch@nvidia.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Ido Schimmel authored
As explained in commit 8bcfb4ae ("selftests: forwarding: Fix failing tests with old libnet"), old versions of libnet (used by mausezahn) do not use the "SO_BINDTODEVICE" socket option. For IP unicast packets, this can be solved by prefixing mausezahn invocations with "ip vrf exec". However, IP multicast packets do not perform routing and simply egress the bound device, which does not exist in this case. Fix by specifying the source and destination MAC of the packet which will cause mausezahn to use a packet socket instead of an IP socket. Fixes: 3446dcd7 ("selftests: forwarding: bridge_mdb_max: Add a new selftest") Reported-by:
-
Ido Schimmel authored
As explained in commit 8bcfb4ae ("selftests: forwarding: Fix failing tests with old libnet"), old versions of libnet (used by mausezahn) do not use the "SO_BINDTODEVICE" socket option. For IP unicast packets, this can be solved by prefixing mausezahn invocations with "ip vrf exec". However, IP multicast packets do not perform routing and simply egress the bound device, which does not exist in this case. Fix by specifying the source and destination MAC of the packet which will cause mausezahn to use a packet socket instead of an IP socket. Fixes: b6d00da0 ("selftests: forwarding: Add bridge MDB test") Reported-by:
-
Ido Schimmel authored
As explained in commit 8bcfb4ae ("selftests: forwarding: Fix failing tests with old libnet"), old versions of libnet (used by mausezahn) do not use the "SO_BINDTODEVICE" socket option. For IP unicast packets, this can be solved by prefixing mausezahn invocations with "ip vrf exec". However, IP multicast packets do not perform routing and simply egress the bound device, which does not exist in this case. Fix by specifying the source and destination MAC of the packet which will cause mausezahn to use a packet socket instead of an IP socket. Fixes: 8c33266a ("selftests: forwarding: Add layer 2 miss test cases") Reported-by:
-
Ido Schimmel authored
The test installs filters that match on various IP fragments (e.g., no fragment, first fragment) and expects a certain amount of packets to hit each filter. This is problematic as the filters are not specific enough and can match IP packets (e.g., IGMP) generated by the stack, resulting in failures [1]. Fix by making the filters more specific and match on more fields in the IP header: Source IP, destination IP and protocol. [1] # timeout set to 0 # selftests: net/forwarding: tc_tunnel_key.sh # TEST: tunnel_key nofrag (skip_hw) [FAIL] # packet smaller than MTU was not tunneled # INFO: Could not test offloaded functionality not ok 89 selftests: net/forwarding: tc_tunnel_key.sh # exit=1 Fixes: 533a89b1 ("selftests: forwarding: add tunnel_key "nofrag" test case") Reported-by:
Petr Machata <petrm@nvidia.com> Tested-by:
Davide Caratti <dcaratti@redhat.com> Reviewed-by:
-
Ido Schimmel authored
The test checks that filters that match on source or destination MAC were only hit once. A host can send more than one packet with a given source or destination MAC, resulting in failures. Fix by relaxing the success criterion and instead check that the filters were not hit zero times. Using tc_check_at_least_x_packets() is also an option, but it is not available in older kernels. Fixes: 07e5c751 ("selftests: forwarding: Introduce tc flower matching tests") Reported-by:
-
Ido Schimmel authored
The test relies on 'nc' being the netcat version from the nmap project. While this seems to be the case on Fedora, it is not the case on Ubuntu, resulting in failures such as [1]. Fix by explicitly using the 'ncat' utility from the nmap project and the skip the test in case it is not installed. [1] # timeout set to 0 # selftests: net/forwarding: tc_actions.sh # TEST: gact drop and ok (skip_hw) [ OK ] # TEST: mirred egress flower redirect (skip_hw) [ OK ] # TEST: mirred egress flower mirror (skip_hw) [ OK ] # TEST: mirred egress matchall mirror (skip_hw) [ OK ] # TEST: mirred_egress_to_ingress (skip_hw) [ OK ] # nc: invalid option -- '-' # usage: nc [-46CDdFhklNnrStUuvZz] [-I length] [-i interval] [-M ttl] # [-m minttl] [-O length] [-P proxy_username] [-p source_port] # [-q seconds] [-s sourceaddr] [-T keyword] [-V rtable] [-W recvlimit] # [-w timeout] [-X proxy_protocol] [-x proxy_address[:port]] # [destination] [port] # nc: invalid option -- '-' # usage: nc [-46CDdFhklNnrStUuvZz] [-I length] [-i interval] [-M ttl] # [-m minttl] [-O length] [-P proxy_username] [-p source_port] # [-q seconds] [-s sourceaddr] [-T keyword] [-V rtable] [-W recvlimit] # [-w timeout] [-X proxy_protocol] [-x proxy_address[:port]] # [destination] [port] # TEST: mirred_egress_to_ingress_tcp (skip_hw) [FAIL] # server output check failed # INFO: Could not test offloaded functionality not ok 80 selftests: net/forwarding: tc_actions.sh # exit=1 Fixes: ca22da2f ("act_mirred: use the backlog for nested calls to mirred ingress") Reported-by:
-
Ido Schimmel authored
MAC Merge cannot be tested with veth pairs, resulting in failures: # ./ethtool_mm.sh [...] TEST: Manual configuration with verification: swp1 to swp2 [FAIL] Verification did not succeed Fix by skipping the test when the interfaces do not support MAC Merge. Fixes: e6991384 ("selftests: forwarding: add a test for MAC Merge layer") Reported-by: -
Ido Schimmel authored
Layer 3 hardware stats cannot be used when the underlying interfaces are veth pairs, resulting in failures: # ./hw_stats_l3_gre.sh TEST: ping gre flat [ OK ] TEST: Test rx packets: [FAIL] Traffic not reflected in the counter: 0 -> 0 TEST: Test tx packets: [FAIL] Traffic not reflected in the counter: 0 -> 0 Fix by skipping the test when used with veth pairs. Fixes: 813f97a2 ("selftests: forwarding: Add a tunnel-based test for L3 HW stats") Reported-by: -
Ido Schimmel authored
Ethtool extended state cannot be tested with veth pairs, resulting in failures: # ./ethtool_extended_state.sh TEST: Autoneg, No partner detected [FAIL] Expected "Autoneg", got "Link detected: no" [...] Fix by skipping the test when used with veth pairs. Fixes: 7d10bcce ("selftests: forwarding: Add tests for ethtool extended state") Reported-by: -
Ido Schimmel authored
Auto-negotiation cannot be tested with veth pairs, resulting in failures: # ./ethtool.sh TEST: force of same speed autoneg off [FAIL] error in configuration. swp1 speed Not autoneg off [...] Fix by skipping the test when used with veth pairs. Fixes: 64916b57 ("selftests: forwarding: Add speed and auto-negotiation test") Reported-by: -
Ido Schimmel authored
A handful of tests require physical loopbacks to be used instead of veth pairs. Add a helper that these tests will invoke in order to be skipped when executed with veth pairs. Fixes: 64916b57 ("selftests: forwarding: Add speed and auto-negotiation test") Signed-off-by:
-
Ido Schimmel authored
The test uses the 'TROUTE6' environment variable to encode the name of the IPv6 traceroute utility. By default (without a configuration file), this variable is not set, resulting in failures: # ./ip6_forward_instats_vrf.sh TEST: ping6 [ OK ] TEST: Ip6InTooBigErrors [ OK ] TEST: Ip6InHdrErrors [FAIL] TEST: Ip6InAddrErrors [ OK ] TEST: Ip6InDiscards [ OK ] Fix by setting a default utility name and skip the test if the utility is not present. Fixes: 0857d6f8 ("ipv6: When forwarding count rx stats on the orig netdev") Reported-by:
-
Ido Schimmel authored
The selftest relies on iproute2 changes present in version 6.3, but the test does not check for it, resulting in errors: # ./bridge_mdb_max.sh INFO: 802.1d tests TEST: cfg4: port: ngroups reporting [FAIL] Number of groups was null, now is null, but 5 expected TEST: ctl4: port: ngroups reporting [FAIL] Number of groups was null, now is null, but 5 expected TEST: cfg6: port: ngroups reporting [FAIL] Number of groups was null, now is null, but 5 expected [...] Fix by skipping the test if iproute2 is too old. Fixes: 3446dcd7 ("selftests: forwarding: bridge_mdb_max: Add a new selftest") Reported-by: -
Ido Schimmel authored
The selftest relies on iproute2 changes present in version 6.3, but the test does not check for it, resulting in error: # ./bridge_mdb.sh INFO: # Host entries configuration tests TEST: Common host entries configuration tests (IPv4) [FAIL] Managed to add IPv4 host entry with a filter mode TEST: Common host entries configuration tests (IPv6) [FAIL] Managed to add IPv6 host entry with a filter mode TEST: Common host entries configuration tests (L2) [FAIL] Managed to add L2 host entry with a filter mode INFO: # Port group entries configuration tests - (*, G) Command "replace" is unknown, try "bridge mdb help". [...] Fix by skipping the test if iproute2 is too old. Fixes: b6d00da0 ("selftests: forwarding: Add bridge MDB test") Reported-by: -
Ido Schimmel authored
The default timeout for selftests is 45 seconds, but it is not enough for forwarding selftests which can takes minutes to finish depending on the number of tests cases: # make -C tools/testing/selftests TARGETS=net/forwarding run_tests TAP version 13 1..102 # timeout set to 45 # selftests: net/forwarding: bridge_igmp.sh # TEST: IGMPv2 report 239.10.10.10 [ OK ] # TEST: IGMPv2 leave 239.10.10.10 [ OK ] # TEST: IGMPv3 report 239.10.10.10 is_include [ OK ] # TEST: IGMPv3 report 239.10.10.10 include -> allow [ OK ] # not ok 1 selftests: net/forwarding: bridge_igmp.sh # TIMEOUT 45 seconds Fix by switching off the timeout and setting it to 0. A similar change was done for BPF selftests in commit 6fc5916c ("selftests: bpf: Switch off timeout"). Fixes: 81573b18 ("selftests/net/forwarding: add Makefile to install tests") Reported-by:
-
Ido Schimmel authored
As explained in [1], the forwarding selftests are meant to be run with either physical loopbacks or veth pairs. The interfaces are expected to be specified in a user-provided forwarding.config file or as command line arguments. By default, this file is not present and the tests fail: # make -C tools/testing/selftests TARGETS=net/forwarding run_tests [...] TAP version 13 1..102 # timeout set to 45 # selftests: net/forwarding: bridge_igmp.sh # Command line is not complete. Try option "help" # Failed to create netif not ok 1 selftests: net/forwarding: bridge_igmp.sh # exit=1 [...] Fix by skipping a test if interfaces are not provided either via the configuration file or command line arguments. # make -C tools/testing/selftests TARGETS=net/forwarding run_tests [...] TAP version 13 1..102 # timeout set to 45 # selftests: net/forwarding: bridge_igmp.sh # SKIP: Cannot create interface. Name not specified ok 1 selftests: net/forwarding: bridge_igmp.sh # SKIP [1] tools/testing/selftests/net/forwarding/README Fixes: 81573b18 ("selftests/net/forwarding: add Makefile to install tests") Reported-by:
-
Eric Dumazet authored
Before this code is copied, add the missing family, as we did in commit 3dd344ea ("net: tracepoint: exposing sk_family in all tcp:tracepoints") Fixes: 15fcdf6a ("tcp: Add tracepoint for tcp_set_ca_state") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Ping Gan <jacky_gam_2001@163.com> Cc: Manjusaka <me@manjusaka.me> Reviewed-by:
Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20230808084923.2239142-1-edumazet@google.comSigned-off-by:
-
Jakub Kicinski authored
Ido Schimmel says: ==================== nexthop: Nexthop dump fixes Patches #1 and #3 fix two problems related to nexthops and nexthop buckets dump, respectively. Patch #2 is a preparation for the third patch. The pattern described in these patches of splitting the NLMSG_DONE to a separate response is prevalent in other rtnetlink dump callbacks. I don't know if it's because I'm missing something or if this was done intentionally to ensure the message is delivered to user space. After commit 0642840b ("af_netlink: ensure that NLMSG_DONE never fails in dumps") this is no longer necessary and I can improve these dump callbacks assuming this analysis is correct. No regressions in existing tests: # ./fib_nexthops.sh [...] Tests passed: 230 Tests failed: 0 ==================== Link: https://lore.kernel.org/r/20230808075233.3337922-1-idosch@nvidia.comSigned-off-by:
-
Ido Schimmel authored
A netlink dump callback can return a positive number to signal that more information needs to be dumped or zero to signal that the dump is complete. In the second case, the core netlink code will append the NLMSG_DONE message to the skb in order to indicate to user space that the dump is complete. The nexthop bucket dump callback always returns a positive number if nexthop buckets were filled in the provided skb, even if the dump is complete. This means that a dump will span at least two recvmsg() calls as long as nexthop buckets are present. In the last recvmsg() call the dump callback will not fill in any nexthop buckets because the previous call indicated that the dump should restart from the last dumped nexthop ID plus one. # ip link add name dummy1 up type dummy # ip nexthop add id 1 dev dummy1 # ip nexthop add id 10 group 1 type resilient buckets 2 # strace -e sendto,recvmsg -s 5 ip nexthop bucket sendto(3, [[{nlmsg_len=24, nlmsg_type=RTM_GETNEXTHOPBUCKET, nlmsg_flags=NLM_F_REQUEST|NLM_F_DUMP, nlmsg_seq=1691396980, nlmsg_pid=0}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}], {nlmsg_len=0, nlmsg_type=0 /* NLMSG_??? */, nlmsg_flags=0, nlmsg_seq=0, nlmsg_pid=0}], 152, 0, NULL, 0) = 152 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 128 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[[{nlmsg_len=64, nlmsg_type=RTM_NEWNEXTHOPBUCKET, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396980, nlmsg_pid=347}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}], [{nlmsg_len=64, nlmsg_type=RTM_NEWNEXTHOPBUCKET, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396980, nlmsg_pid=347}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}]], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 128 id 10 index 0 idle_time 6.66 nhid 1 id 10 index 1 idle_time 6.66 nhid 1 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 20 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[{nlmsg_len=20, nlmsg_type=NLMSG_DONE, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396980, nlmsg_pid=347}, 0], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 20 +++ exited with 0 +++ This behavior is both inefficient and buggy. If the last nexthop to be dumped had the maximum ID of 0xffffffff, then the dump will restart from 0 (0xffffffff + 1) and never end: # ip link add name dummy1 up type dummy # ip nexthop add id 1 dev dummy1 # ip nexthop add id $((2**32-1)) group 1 type resilient buckets 2 # ip nexthop bucket id 4294967295 index 0 idle_time 5.55 nhid 1 id 4294967295 index 1 idle_time 5.55 nhid 1 id 4294967295 index 0 idle_time 5.55 nhid 1 id 4294967295 index 1 idle_time 5.55 nhid 1 [...] Fix by adjusting the dump callback to return zero when the dump is complete. After the fix only one recvmsg() call is made and the NLMSG_DONE message is appended to the RTM_NEWNEXTHOPBUCKET responses: # ip link add name dummy1 up type dummy # ip nexthop add id 1 dev dummy1 # ip nexthop add id $((2**32-1)) group 1 type resilient buckets 2 # strace -e sendto,recvmsg -s 5 ip nexthop bucket sendto(3, [[{nlmsg_len=24, nlmsg_type=RTM_GETNEXTHOPBUCKET, nlmsg_flags=NLM_F_REQUEST|NLM_F_DUMP, nlmsg_seq=1691396737, nlmsg_pid=0}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}], {nlmsg_len=0, nlmsg_type=0 /* NLMSG_??? */, nlmsg_flags=0, nlmsg_seq=0, nlmsg_pid=0}], 152, 0, NULL, 0) = 152 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 148 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[[{nlmsg_len=64, nlmsg_type=RTM_NEWNEXTHOPBUCKET, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396737, nlmsg_pid=350}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}], [{nlmsg_len=64, nlmsg_type=RTM_NEWNEXTHOPBUCKET, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396737, nlmsg_pid=350}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}], [{nlmsg_len=20, nlmsg_type=NLMSG_DONE, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396737, nlmsg_pid=350}, 0]], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 148 id 4294967295 index 0 idle_time 6.61 nhid 1 id 4294967295 index 1 idle_time 6.61 nhid 1 +++ exited with 0 +++ Note that if the NLMSG_DONE message cannot be appended because of size limitations, then another recvmsg() will be needed, but the core netlink code will not invoke the dump callback and simply reply with a NLMSG_DONE message since it knows that the callback previously returned zero. Add a test that fails before the fix: # ./fib_nexthops.sh -t basic_res [...] TEST: Maximum nexthop ID dump [FAIL] [...] And passes after it: # ./fib_nexthops.sh -t basic_res [...] TEST: Maximum nexthop ID dump [ OK ] [...] Fixes: 8a1bbabb ("nexthop: Add netlink handlers for bucket dump") Signed-off-by:David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20230808075233.3337922-4-idosch@nvidia.comSigned-off-by:
-
Ido Schimmel authored
rtm_dump_nexthop_bucket_nh() is used to dump nexthop buckets belonging to a specific resilient nexthop group. The function returns a positive return code (the skb length) upon both success and failure. The above behavior is problematic. When a complete nexthop bucket dump is requested, the function that walks the different nexthops treats the non-zero return code as an error. This causes buckets belonging to different resilient nexthop groups to be dumped using different buffers even if they can all fit in the same buffer: # ip link add name dummy1 up type dummy # ip nexthop add id 1 dev dummy1 # ip nexthop add id 10 group 1 type resilient buckets 1 # ip nexthop add id 20 group 1 type resilient buckets 1 # strace -e recvmsg -s 0 ip nexthop bucket [...] recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[...], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 64 id 10 index 0 idle_time 10.27 nhid 1 [...] recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[...], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 64 id 20 index 0 idle_time 6.44 nhid 1 [...] Fix by only returning a non-zero return code when an error occurred and restarting the dump from the bucket index we failed to fill in. This allows buckets belonging to different resilient nexthop groups to be dumped using the same buffer: # ip link add name dummy1 up type dummy # ip nexthop add id 1 dev dummy1 # ip nexthop add id 10 group 1 type resilient buckets 1 # ip nexthop add id 20 group 1 type resilient buckets 1 # strace -e recvmsg -s 0 ip nexthop bucket [...] recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[...], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 128 id 10 index 0 idle_time 30.21 nhid 1 id 20 index 0 idle_time 26.7 nhid 1 [...] While this change is more of a performance improvement change than an actual bug fix, it is a prerequisite for a subsequent patch that does fix a bug. Fixes: 8a1bbabb ("nexthop: Add netlink handlers for bucket dump") Signed-off-by: -
Ido Schimmel authored
A netlink dump callback can return a positive number to signal that more information needs to be dumped or zero to signal that the dump is complete. In the second case, the core netlink code will append the NLMSG_DONE message to the skb in order to indicate to user space that the dump is complete. The nexthop dump callback always returns a positive number if nexthops were filled in the provided skb, even if the dump is complete. This means that a dump will span at least two recvmsg() calls as long as nexthops are present. In the last recvmsg() call the dump callback will not fill in any nexthops because the previous call indicated that the dump should restart from the last dumped nexthop ID plus one. # ip nexthop add id 1 blackhole # strace -e sendto,recvmsg -s 5 ip nexthop sendto(3, [[{nlmsg_len=24, nlmsg_type=RTM_GETNEXTHOP, nlmsg_flags=NLM_F_REQUEST|NLM_F_DUMP, nlmsg_seq=1691394315, nlmsg_pid=0}, {nh_family=AF_UNSPEC, nh_scope=RT_SCOPE_UNIVERSE, nh_protocol=RTPROT_UNSPEC, nh_flags=0}], {nlmsg_len=0, nlmsg_type=0 /* NLMSG_??? */, nlmsg_flags=0, nlmsg_seq=0, nlmsg_pid=0}], 152, 0, NULL, 0) = 152 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 36 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[{nlmsg_len=36, nlmsg_type=RTM_NEWNEXTHOP, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691394315, nlmsg_pid=343}, {nh_family=AF_INET, nh_scope=RT_SCOPE_UNIVERSE, nh_protocol=RTPROT_UNSPEC, nh_flags=0}, [[{nla_len=8, nla_type=NHA_ID}, 1], {nla_len=4, nla_type=NHA_BLACKHOLE}]], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 36 id 1 blackhole recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 20 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[{nlmsg_len=20, nlmsg_type=NLMSG_DONE, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691394315, nlmsg_pid=343}, 0], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 20 +++ exited with 0 +++ This behavior is both inefficient and buggy. If the last nexthop to be dumped had the maximum ID of 0xffffffff, then the dump will restart from 0 (0xffffffff + 1) and never end: # ip nexthop add id $((2**32-1)) blackhole # ip nexthop id 4294967295 blackhole id 4294967295 blackhole [...] Fix by adjusting the dump callback to return zero when the dump is complete. After the fix only one recvmsg() call is made and the NLMSG_DONE message is appended to the RTM_NEWNEXTHOP response: # ip nexthop add id $((2**32-1)) blackhole # strace -e sendto,recvmsg -s 5 ip nexthop sendto(3, [[{nlmsg_len=24, nlmsg_type=RTM_GETNEXTHOP, nlmsg_flags=NLM_F_REQUEST|NLM_F_DUMP, nlmsg_seq=1691394080, nlmsg_pid=0}, {nh_family=AF_UNSPEC, nh_scope=RT_SCOPE_UNIVERSE, nh_protocol=RTPROT_UNSPEC, nh_flags=0}], {nlmsg_len=0, nlmsg_type=0 /* NLMSG_??? */, nlmsg_flags=0, nlmsg_seq=0, nlmsg_pid=0}], 152, 0, NULL, 0) = 152 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 56 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[[{nlmsg_len=36, nlmsg_type=RTM_NEWNEXTHOP, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691394080, nlmsg_pid=342}, {nh_family=AF_INET, nh_scope=RT_SCOPE_UNIVERSE, nh_protocol=RTPROT_UNSPEC, nh_flags=0}, [[{nla_len=8, nla_type=NHA_ID}, 4294967295], {nla_len=4, nla_type=NHA_BLACKHOLE}]], [{nlmsg_len=20, nlmsg_type=NLMSG_DONE, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691394080, nlmsg_pid=342}, 0]], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 56 id 4294967295 blackhole +++ exited with 0 +++ Note that if the NLMSG_DONE message cannot be appended because of size limitations, then another recvmsg() will be needed, but the core netlink code will not invoke the dump callback and simply reply with a NLMSG_DONE message since it knows that the callback previously returned zero. Add a test that fails before the fix: # ./fib_nexthops.sh -t basic [...] TEST: Maximum nexthop ID dump [FAIL] [...] And passes after it: # ./fib_nexthops.sh -t basic [...] TEST: Maximum nexthop ID dump [ OK ] [...] Fixes: ab84be7e ("net: Initial nexthop code") Reported-by: -
Vlad Buslov authored
The referenced commit intended to fix memleak of VLAN 0 that is implicitly created on devices with NETIF_F_HW_VLAN_CTAG_FILTER feature. However, it doesn't take into account that the feature can be re-set during the netdevice lifetime which will cause memory leak if feature is disabled during the device deletion as illustrated by [0]. Fix the leak by unconditionally deleting VLAN 0 on NETDEV_DOWN event. [0]: > modprobe 8021q > ip l set dev eth2 up > ethtool -K eth2 rx-vlan-filter off > modprobe -r mlx5_ib > modprobe -r mlx5_core > cat /sys/kernel/debug/kmemleak unreferenced object 0xffff888103dcd900 (size 256): comm "ip", pid 1490, jiffies 4294907305 (age 325.364s) hex dump (first 32 bytes): 00 80 5d 03 81 88 ff ff 00 00 00 00 00 00 00 00 ..]............. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000899f3bb9>] kmalloc_trace+0x25/0x80 [<000000002889a7a2>] vlan_vid_add+0xa0/0x210 [<000000007177800e>] vlan_device_event+0x374/0x760 [8021q] [<000000009a0716b1>] notifier_call_chain+0x35/0xb0 [<00000000bbf3d162>] __dev_notify_flags+0x58/0xf0 [<0000000053d2b05d>] dev_change_flags+0x4d/0x60 [<00000000982807e9>] do_setlink+0x28d/0x10a0 [<0000000058c1be00>] __rtnl_newlink+0x545/0x980 [<00000000e66c3bd9>] rtnl_newlink+0x44/0x70 [<00000000a2cc5970>] rtnetlink_rcv_msg+0x29c/0x390 [<00000000d307d1e4>] netlink_rcv_skb+0x54/0x100 [<00000000259d16f9>] netlink_unicast+0x1f6/0x2c0 [<000000007ce2afa1>] netlink_sendmsg+0x232/0x4a0 [<00000000f3f4bb39>] sock_sendmsg+0x38/0x60 [<000000002f9c0624>] ____sys_sendmsg+0x1e3/0x200 [<00000000d6ff5520>] ___sys_sendmsg+0x80/0xc0 unreferenced object 0xffff88813354fde0 (size 32): comm "ip", pid 1490, jiffies 4294907305 (age 325.364s) hex dump (first 32 bytes): a0 d9 dc 03 81 88 ff ff a0 d9 dc 03 81 88 ff ff ................ 81 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000899f3bb9>] kmalloc_trace+0x25/0x80 [<000000002da64724>] vlan_vid_add+0xdf/0x210 [<000000007177800e>] vlan_device_event+0x374/0x760 [8021q] [<000000009a0716b1>] notifier_call_chain+0x35/0xb0 [<00000000bbf3d162>] __dev_notify_flags+0x58/0xf0 [<0000000053d2b05d>] dev_change_flags+0x4d/0x60 [<00000000982807e9>] do_setlink+0x28d/0x10a0 [<0000000058c1be00>] __rtnl_newlink+0x545/0x980 [<00000000e66c3bd9>] rtnl_newlink+0x44/0x70 [<00000000a2cc5970>] rtnetlink_rcv_msg+0x29c/0x390 [<00000000d307d1e4>] netlink_rcv_skb+0x54/0x100 [<00000000259d16f9>] netlink_unicast+0x1f6/0x2c0 [<000000007ce2afa1>] netlink_sendmsg+0x232/0x4a0 [<00000000f3f4bb39>] sock_sendmsg+0x38/0x60 [<000000002f9c0624>] ____sys_sendmsg+0x1e3/0x200 [<00000000d6ff5520>] ___sys_sendmsg+0x80/0xc0 Fixes: efc73f4b ("net: Fix memory leak - vlan_info struct") Reviewed-by:Vlad Buslov <vladbu@nvidia.com> Link: https://lore.kernel.org/r/20230808093521.1468929-1-vladbu@nvidia.comSigned-off-by:
-
David S. Miller authored
Gerd Bayer says: ==================== net/smc: Fix effective buffer size commit 0227f058 ("net/smc: Unbind r/w buffer size from clcsock and make them tunable") started to derive the effective buffer size for SMC connections inconsistently in case a TCP fallback was used and memory consumption of SMC with the default settings was doubled when a connection negotiated SMC. That was not what we want. This series consolidates the resulting effective buffer size that is used with SMC sockets, which is based on Jan Karcher's effort (see [1]). For all TCP exchanges (in particular in case of a fall back when no SMC connection was possible) the values from net.ipv4.tcp_[rw]mem are used. If SMC succeeds in establishing a SMC connection, the newly introduced values from net.smc.[rw]mem are used. net.smc.[rw]mem is initialized to 64kB, respectively. Internal test have show this to be a good compromise between throughput/latency and memory consumption. Also net.smc.[rw]mem is now decoupled completely from any tuning through net.ipv4.tcp_[rw]mem. If a user chose to tune a socket's receive or send buffer size with setsockopt, this tuning is now consistently applied to either fall-back TCP or proper SMC connections over the socket. Thanks, Gerd v2 - v3: - Rebase to and resolve conflict of second patch with latest net/master. v1 - v2: - In second patch, use sock_net() helper as suggested by Tony and demanded by kernel test robot. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Gerd Bayer authored
Tuning of the effective buffer size through setsockopts was working for SMC traffic only but not for TCP fall-back connections even before commit 0227f058 ("net/smc: Unbind r/w buffer size from clcsock and make them tunable"). That change made it apparent that TCP fall-back connections would use net.smc.[rw]mem as buffer size instead of net.ipv4_tcp_[rw]mem. Amend the code that copies attributes between the (TCP) clcsock and the SMC socket and adjust buffer sizes appropriately: - Copy over sk_userlocks so that both sockets agree on whether tuning via setsockopt is active. - When falling back to TCP use sk_sndbuf or sk_rcvbuf as specified with setsockopt. Otherwise, use the sysctl value for TCP/IPv4. - Likewise, use either values from setsockopt or from sysctl for SMC (duplicated) on successful SMC connect. In smc_tcp_listen_work() drop the explicit copy of buffer sizes as that is taken care of by the attribute copy. Fixes: 0227f058 ("net/smc: Unbind r/w buffer size from clcsock and make them tunable") Reviewed-by:
Wenjia Zhang <wenjia@linux.ibm.com> Reviewed-by:
Tony Lu <tonylu@linux.alibaba.com> Signed-off-by:
Gerd Bayer <gbayer@linux.ibm.com> Signed-off-by:
-
Gerd Bayer authored
Commit 0227f058 ("net/smc: Unbind r/w buffer size from clcsock and make them tunable") introduced the net.smc.rmem and net.smc.wmem sysctls to specify the size of buffers to be used for SMC type connections. This created a regression for users that specified the buffer size via setsockopt() as the effective buffer size was now doubled. Re-introduce the division by 2 in the SMC buffer create code and level this out by duplicating the net.smc.[rw]mem values used for initializing sk_rcvbuf/sk_sndbuf at socket creation time. This gives users of both methods (setsockopt or sysctl) the effective buffer size that they expect. Initialize net.smc.[rw]mem from its own constant of 64kB, respectively. Internal performance tests show that this value is a good compromise between throughput/latency and memory consumption. Also, this decouples it from any tuning that was done to net.ipv4.tcp_[rw]mem[1] before the module for SMC protocol was loaded. Check that no more than INT_MAX / 2 is assigned to net.smc.[rw]mem, in order to avoid any overflow condition when that is doubled for use in sk_sndbuf or sk_rcvbuf. While at it, drop the confusing sk_buf_size variable from __smc_buf_create and name "compressed" buffer size variables more consistently. Background: Before the commit mentioned above, SMC's buffer allocator in __smc_buf_create() always used half of the sockets' sk_rcvbuf/sk_sndbuf value as initial value to search for appropriate buffers. If the search resorted to using a bigger buffer when all buffers of the specified size were busy, the duplicate of the used effective buffer size is stored back to sk_rcvbuf/sk_sndbuf. When available, buffers of exactly the size that a user had specified as input to setsockopt() were used, despite setsockopt()'s documentation in "man 7 socket" talking of a mandatory duplication: [...] SO_SNDBUF Sets or gets the maximum socket send buffer in bytes. The kernel doubles this value (to allow space for book‐ keeping overhead) when it is set using setsockopt(2), and this doubled value is returned by getsockopt(2). The default value is set by the /proc/sys/net/core/wmem_default file and the maximum allowed value is set by the /proc/sys/net/core/wmem_max file. The minimum (doubled) value for this option is 2048. [...] Fixes: 0227f058 ("net/smc: Unbind r/w buffer size from clcsock and make them tunable") Co-developed-by:
Jan Karcher <jaka@linux.ibm.com> Signed-off-by:
-
David S. Miller authored
Vladimir Oltean says: ==================== Fix ENETC probing after 6fffbc7a ("PCI: Honor firmware's device disabled status") I'm not sure who should take this patch set (net maintainers or PCI maintainers). Everyone could pick up just their part, and that would work (no compile time dependencies). However, the entire series needs ACK from both sides and Rob for sure. v1 at: https://lore.kernel.org/netdev/20230521115141.2384444-1-vladimir.oltean@nxp.com/ ==================== Reviewed-by:
-
Vladimir Oltean authored
Since commit 6fffbc7a ("PCI: Honor firmware's device disabled status"), this is redundant and does nothing, because enetc_pf_probe() no longer even gets called. Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
Vladimir Oltean authored
The workaround implemented in commit 3222b5b6 ("net: enetc: initialize RFS/RSS memories for unused ports too") is no longer effective after commit 6fffbc7a ("PCI: Honor firmware's device disabled status"). Thus, it has introduced a regression and we see AER errors being reported again: $ ip link set sw2p0 up && dhclient -i sw2p0 && ip addr show sw2p0 fsl_enetc 0000:00:00.2 eno2: configuring for fixed/internal link mode fsl_enetc 0000:00:00.2 eno2: Link is Up - 2.5Gbps/Full - flow control rx/tx mscc_felix 0000:00:00.5 swp2: configuring for fixed/sgmii link mode mscc_felix 0000:00:00.5 swp2: Link is Up - 1Gbps/Full - flow control off sja1105 spi2.2 sw2p0: configuring for phy/rgmii-id link mode sja1105 spi2.2 sw2p0: Link is Up - 1Gbps/Full - flow control off pcieport 0000:00:1f.0: AER: Multiple Corrected error received: 0000:00:00.0 pcieport 0000:00:1f.0: AER: can't find device of ID0000 Rob's suggestion is to reimplement the enetc driver workaround as a PCI fixup, and to modify the PCI core to run the fixups for all PCI functions. This change handles the first part. We refactor the common code in enetc_psi_create() and enetc_psi_destroy(), and use the PCI fixup only for those functions for which enetc_pf_probe() won't get called. This avoids some work being done twice for the PFs which are enabled. Fixes: 6fffbc7a ("PCI: Honor firmware's device disabled status") Link: https://lore.kernel.org/netdev/CAL_JsqLsVYiPLx2kcHkDQ4t=hQVCR7NHziDwi9cCFUFhx48Qow@mail.gmail.com/Suggested-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Vladimir Oltean authored
The blamed commit has broken probing on arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi when &enetc_port0 (PCI function 0) has status = "disabled". Background: pci_scan_slot() has logic to say that if the function 0 of a device is absent, the entire device is absent and we can skip the other functions entirely. Traditionally, this has meant that pci_bus_read_dev_vendor_id() returns an error code for that function. However, since the blamed commit, there is an extra confounding condition: function 0 of the device exists and has a valid vendor id, but it is disabled in the device tree. In that case, pci_scan_slot() would incorrectly skip the entire device instead of just that function. In the case of NXP LS1028A, status = "disabled" does not mean that the PCI function's config space is not available for reading. It is, but the Ethernet port is just not functionally useful with a particular SerDes protocol configuration (0x9999) due to pinmuxing constraints of the Soc. So, pci_scan_slot() skips all other functions on the ENETC ECAM (enetc_port1, enetc_port2, enetc_mdio_pf3 etc) when just enetc_port0 had to not be probed. There is an additional regression introduced by the change, caused by its fundamental premise. The enetc driver needs to run code for all PCI functions, regardless of whether they're enabled or not in the device tree. That is no longer possible if the driver's probe function is no longer called. But Rob recommends that we move the of_device_is_available() detection to dev->match_driver, and this makes the PCI fixups still run on all functions, while just probing drivers for those functions that are enabled. So, a separate change in the enetc driver will have to move the workarounds to a PCI fixup. Fixes: 6fffbc7a ("PCI: Honor firmware's device disabled status") Link: https://lore.kernel.org/netdev/CAL_JsqLsVYiPLx2kcHkDQ4t=hQVCR7NHziDwi9cCFUFhx48Qow@mail.gmail.com/Suggested-by:
-
- 08 Aug, 2023 10 commits
-
-
Piotr Gardocki authored
Add fdir_fltr_lock locking in unprotected places. The change in iavf_fdir_is_dup_fltr adds a spinlock around a loop which iterates over all filters and looks for a duplicate. The filter can be removed from list and freed from memory at the same time it's being compared. All other places where filters are deleted are already protected with spinlock. The remaining changes protect adapter->fdir_active_fltr variable so now all its uses are under a spinlock. Fixes: 527691bf ("iavf: Support IPv4 Flow Director filters") Signed-off-by:
Piotr Gardocki <piotrx.gardocki@intel.com> Tested-by:
Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by:
-
Muhammad Husaini Zulkifli authored
Access to shared variables through hrtimer requires locking in order to protect the variables because actions to write into these variables (oper_gate_closed, admin_gate_closed, and qbv_transition) might potentially occur simultaneously. This patch provides a locking mechanisms to avoid such scenarios. Fixes: 175c2412 ("igc: Fix TX Hang issue when QBV Gate is closed") Suggested-by:
Leon Romanovsky <leon@kernel.org> Signed-off-by:
Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Tested-by:
Naama Meir <naamax.meir@linux.intel.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxJakub Kicinski authored
Saeed Mahameed says: ==================== mlx5 fixes 2023-08-07 This series provides bug fixes to mlx5 driver. * tag 'mlx5-fixes-2023-08-07' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5e: Add capability check for vnic counters net/mlx5: Reload auxiliary devices in pci error handlers net/mlx5: Skip clock update work when device is in error state net/mlx5: LAG, Check correct bucket when modifying LAG net/mlx5e: Unoffload post act rule when handling FIB events net/mlx5: Fix devlink controller number for ECVF net/mlx5: Allow 0 for total host VFs net/mlx5: Return correct EC_VF function ID net/mlx5: DR, Fix wrong allocation of modify hdr pattern net/mlx5e: TC, Fix internal port memory leak net/mlx5e: Take RTNL lock when needed before calling xdp_set_features() ==================== Link: https://lore.kernel.org/r/20230807212607.50883-1-saeed@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
Jijie Shao says: ==================== There are some bugfix for the HNS3 ethernet driver There are some bugfix for the HNS3 ethernet driver v1: https://lore.kernel.org/all/20230728075840.4022760-2-shaojijie@huawei.com/ ==================== Link: https://lore.kernel.org/r/20230807113452.474224-1-shaojijie@huawei.comSigned-off-by:
-
Yonglong Liu authored
When externel_lb and reset are executed together, a deadlock may occur: [ 3147.217009] INFO: task kworker/u321:0:7 blocked for more than 120 seconds. [ 3147.230483] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 3147.238999] task:kworker/u321:0 state:D stack: 0 pid: 7 ppid: 2 flags:0x00000008 [ 3147.248045] Workqueue: hclge hclge_service_task [hclge] [ 3147.253957] Call trace: [ 3147.257093] __switch_to+0x7c/0xbc [ 3147.261183] __schedule+0x338/0x6f0 [ 3147.265357] schedule+0x50/0xe0 [ 3147.269185] schedule_preempt_disabled+0x18/0x24 [ 3147.274488] __mutex_lock.constprop.0+0x1d4/0x5dc [ 3147.279880] __mutex_lock_slowpath+0x1c/0x30 [ 3147.284839] mutex_lock+0x50/0x60 [ 3147.288841] rtnl_lock+0x20/0x2c [ 3147.292759] hclge_reset_prepare+0x68/0x90 [hclge] [ 3147.298239] hclge_reset_subtask+0x88/0xe0 [hclge] [ 3147.303718] hclge_reset_service_task+0x84/0x120 [hclge] [ 3147.309718] hclge_service_task+0x2c/0x70 [hclge] [ 3147.315109] process_one_work+0x1d0/0x490 [ 3147.319805] worker_thread+0x158/0x3d0 [ 3147.324240] kthread+0x108/0x13c [ 3147.328154] ret_from_fork+0x10/0x18 In externel_lb process, the hns3 driver call napi_disable() first, then the reset happen, then the restore process of the externel_lb will fail, and will not call napi_enable(). When doing externel_lb again, napi_disable() will be double call, cause a deadlock of rtnl_lock(). This patch use the HNS3_NIC_STATE_DOWN state to protect the calling of napi_disable() and napi_enable() in externel_lb process, just as the usage in ndo_stop() and ndo_start(). Fixes: 04b6ba14 ("net: hns3: add support for external loopback test") Signed-off-by:
Yonglong Liu <liuyonglong@huawei.com> Signed-off-by:
Jijie Shao <shaojijie@huawei.com> Reviewed-by:
Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20230807113452.474224-5-shaojijie@huawei.comSigned-off-by:
-
Jie Wang authored
In some configure flow of hns3 driver, for example, change mtu, it will disable MAC through firmware before configuration. But firmware disables MAC asynchronously. The rx traffic may be not stopped in this case. So fixes it by waiting until mac link is down. Fixes: a9775bb6 ("net: hns3: fix set and get link ksettings issue") Signed-off-by:
Jie Wang <wangjie125@huawei.com> Signed-off-by:
-
Jie Wang authored
Some nic configurations could only be performed after link is down. So this patch refactor this API for reuse. Signed-off-by:
-
Jian Shen authored
Restore the mac pause state to user configuration when autoneg is disabled Signed-off-by:
Jian Shen <shenjian15@huawei.com> Signed-off-by:
Peiyang Wang <wangpeiyang1@huawei.com> Signed-off-by:
-
David Rheinsberg authored
Change the new (unreleased) SO_PEERPIDFD sockopt to return ENODATA rather than ESRCH if a socket type does not support remote peer-PID queries. Currently, SO_PEERPIDFD returns ESRCH when the socket in question is not an AF_UNIX socket. This is quite unexpected, given that one would assume ESRCH means the peer process already exited and thus cannot be found. However, in that case the sockopt actually returns EINVAL (via pidfd_prepare()). This is rather inconsistent with other syscalls, which usually return ESRCH if a given PID refers to a non-existant process. This changes SO_PEERPIDFD to return ENODATA instead. This is also what SO_PEERGROUPS returns, and thus keeps a consistent behavior across sockopts. Note that this code is returned in 2 cases: First, if the socket type is not AF_UNIX, and secondly if the socket was not yet connected. In both cases ENODATA seems suitable. Signed-off-by:
David Rheinsberg <david@readahead.eu> Reviewed-by:
Christian Brauner <brauner@kernel.org> Acked-by:
Luca Boccassi <bluca@debian.org> Fixes: 7b26952a ("net: core: add getsockopt SO_PEERPIDFD") Link: https://lore.kernel.org/r/20230807081225.816199-1-david@readahead.euSigned-off-by:
-
Claudiu Beznea authored
Update MAINTAINERS entries with a valid email address as the Microchip one is no longer valid. Acked-by:
Conor Dooley <conor.dooley@microchip.com> Acked-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by:
Claudiu Beznea <claudiu.beznea@tuxon.dev> Acked-by:
Sebastian Reichel <sre@kernel.org> Link: https://lore.kernel.org/r/20230804050007.235799-1-claudiu.beznea@tuxon.devSigned-off-by:
-
