Daniel Borkmann says:

====================
pull-request: bpf 2017-12-21

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Fix multiple security issues in the BPF verifier mostly related
   to the value and min/max bounds tracking rework in 4.14. Issues
   range from incorrect bounds calculation in some BPF_RSH cases,
   to improper sign extension and reg size handling on 32 bit
   ALU ops, missing strict alignment checks on stack pointers, and
   several others that got fixed, from Jann, Alexei and Edward.

2) Fix various build failures in BPF selftests on sparc64. More
   specifically, librt needed to be added to the libs to link
   against and few format string fixups for sizeof, from David.

3) Fix one last remaining issue from BPF selftest build that was
   still occuring on s390x from the asm/bpf_perf_event.h include
   which could not find the asm/ptrace.h copy, from Hendrik.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Do not allow root to convert valid pointers into unknown scalars.
In particular disallow:
 ptr &= reg
 ptr <<= reg
 ptr += ptr
and explicitly allow:
 ptr -= ptr
since pkt_end - pkt == length

1.
This minimizes amount of address leaks root can do.
In the future may need to further tighten the leaks with kptr_restrict.

2.
If program has such pointer math it's likely a user mistake and
when verifier complains about it right away instead of many instructions
later on invalid memory access it's easier for users to fix their progs.

3.
when register holding a pointer cannot change to scalar it allows JITs to
optimize better. Like 32-bit archs could use single register for pointers
instead of a pair required to hold 64-bit scalars.

4.
reduces architecture dependent behavior. Since code:
r1 = r10;
r1 &= 0xff;
if (r1 ...)
will behave differently arm64 vs x64 and offloaded vs native.

A significant chunk of ptr mangling was allowed by
commit f1174f77 ("bpf/verifier: rework value tracking")
yet some of it was allowed even earlier.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Alexei Starovoitov says:

====================
This patch set addresses a set of security vulnerabilities
in bpf verifier logic discovered by Jann Horn.
All of the patches are candidates for 4.14 stable.
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

These tests should cover the following cases:

 - MOV with both zero-extended and sign-extended immediates
 - implicit truncation of register contents via ALU32/MOV32
 - implicit 32-bit truncation of ALU32 output
 - oversized register source operand for ALU32 shift
 - right-shift of a number that could be positive or negative
 - map access where adding the operation size to the offset causes signed
   32-bit overflow
 - direct stack access at a ~4GiB offset

Also remove the F_LOAD_WITH_STRICT_ALIGNMENT flag from a bunch of tests
that should fail independent of what flags userspace passes.
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

There were various issues related to the limited size of integers used in
the verifier:
 - `off + size` overflow in __check_map_access()
 - `off + reg->off` overflow in check_mem_access()
 - `off + reg->var_off.value` overflow or 32-bit truncation of
   `reg->var_off.value` in check_mem_access()
 - 32-bit truncation in check_stack_boundary()

Make sure that any integer math cannot overflow by not allowing
pointer math with large values.

Also reduce the scope of "scalar op scalar" tracking.

Fixes: f1174f77 ("bpf/verifier: rework value tracking")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

This could be made safe by passing through a reference to env and checking
for env->allow_ptr_leaks, but it would only work one way and is probably
not worth the hassle - not doing it will not directly lead to program
rejection.

Fixes: f1174f77 ("bpf/verifier: rework value tracking")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Force strict alignment checks for stack pointers because the tracking of
stack spills relies on it; unaligned stack accesses can lead to corruption
of spilled registers, which is exploitable.

Fixes: f1174f77 ("bpf/verifier: rework value tracking")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Prevent indirect stack accesses at non-constant addresses, which would
permit reading and corrupting spilled pointers.

Fixes: f1174f77 ("bpf/verifier: rework value tracking")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

32-bit ALU ops operate on 32-bit values and have 32-bit outputs.
Adjust the verifier accordingly.

Fixes: f1174f77 ("bpf/verifier: rework value tracking")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Properly handle register truncation to a smaller size.

The old code first mirrors the clearing of the high 32 bits in the bitwise
tristate representation, which is correct. But then, it computes the new
arithmetic bounds as the intersection between the old arithmetic bounds and
the bounds resulting from the bitwise tristate representation. Therefore,
when coerce_reg_to_32() is called on a number with bounds
[0xffff'fff8, 0x1'0000'0007], the verifier computes
[0xffff'fff8, 0xffff'ffff] as bounds of the truncated number.
This is incorrect: The truncated number could also be in the range [0, 7],
and no meaningful arithmetic bounds can be computed in that case apart from
the obvious [0, 0xffff'ffff].

Starting with v4.14, this is exploitable by unprivileged users as long as
the unprivileged_bpf_disabled sysctl isn't set.

Debian assigned CVE-2017-16996 for this issue.

v2:
 - flip the mask during arithmetic bounds calculation (Ben Hutchings)
v3:
 - add CVE number (Ben Hutchings)

Fixes: b03c9f9f ("bpf/verifier: track signed and unsigned min/max values")
Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Distinguish between
BPF_ALU64|BPF_MOV|BPF_K (load 32-bit immediate, sign-extended to 64-bit)
and BPF_ALU|BPF_MOV|BPF_K (load 32-bit immediate, zero-padded to 64-bit);
only perform sign extension in the first case.

Starting with v4.14, this is exploitable by unprivileged users as long as
the unprivileged_bpf_disabled sysctl isn't set.

Debian assigned CVE-2017-16995 for this issue.

v3:
 - add CVE number (Ben Hutchings)

Fixes: 48461135 ("bpf: allow access into map value arrays")
Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Incorrect signed bounds were being computed.
If the old upper signed bound was positive and the old lower signed bound was
negative, this could cause the new upper signed bound to be too low,
leading to security issues.

Fixes: b03c9f9f ("bpf/verifier: track signed and unsigned min/max values")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Edward Cree <ecree@solarflare.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
[jannh@google.com: changed description to reflect bug impact]
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Since commit 0ddcf43d ("ipv4: FIB Local/MAIN table collapse") the
local table uses the same trie allocated for the main table when custom
rules are not in use.

When a net namespace is dismantled, the main table is flushed and freed
(via an RCU callback) before the local table. In case the callback is
invoked before the local table is iterated, a use-after-free can occur.

Fix this by iterating over the FIB tables in reverse order, so that the
main table is always freed after the local table.

v3: Reworded comment according to Alex's suggestion.
v2: Add a comment to make the fix more explicit per Dave's and Alex's
feedback.

Fixes: 0ddcf43d ("ipv4: FIB Local/MAIN table collapse")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Acked-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make sure to check both return code fields before processing the
response. Otherwise we risk operating on invalid data.

Fixes: c9475369 ("s390/qeth: rework RX/TX checksum offload")
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When we receive a JOIN message from a peer member, the message may
contain an advertised window value ADV_IDLE that permits removing the
member in question from the tipc_group::congested list. However, since
the removal has been made conditional on that the advertised window is
*not* ADV_IDLE, we miss this case. This has the effect that a sender
sometimes may enter a state of permanent, false, broadcast congestion.

We fix this by unconditinally removing the member from the congested
list before calling tipc_member_update(), which might potentially sort
it into the list again.
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

kernel config fragement CONFIG_NUMA=y is need for reuseport_bpf_numa.
Signed-off-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Saeed Mahameed says:

===================
Mellanox, mlx5 fixes 2017-12-19

The follwoing series includes some fixes for mlx5 core and etherent
driver.

Please pull and let me know if there is any problem.

This series doesn't introduce any conflict with the ongoing mlx5 for-next
submission.

For -stable:

kernels >= v4.7.y
    ("net/mlx5e: Fix possible deadlock of VXLAN lock")
    ("net/mlx5e: Add refcount to VXLAN structure")
    ("net/mlx5e: Prevent possible races in VXLAN control flow")
    ("net/mlx5e: Fix features check of IPv6 traffic")

kernels >= v4.9.y
    ("net/mlx5: Fix error flow in CREATE_QP command")
    ("net/mlx5: Fix rate limit packet pacing naming and struct")

kernels >= v4.13.y
    ("net/mlx5: FPGA, return -EINVAL if size is zero")

kernels >= v4.14.y
    ("Revert "mlx5: move affinity hints assignments to generic code")

All above patches apply and compile with no issues on corresponding -stable.
===================
Signed-off-by: David S. Miller <davem@davemloft.net>

Jakub Kicinski says:

===================
cls_bpf: fix offload state tracking with block callbacks

After introduction of block callbacks classifiers can no longer track
offload state.  cls_bpf used to do that in an attempt to move common
code from drivers to the core.  Remove that functionality and fix
drivers.

The user-visible bug this is fixing is that trying to offload a second
filter would trigger a spurious DESTROY and in turn disable the already
installed one.
===================
Signed-off-by: David S. Miller <davem@davemloft.net>

After TC offloads were converted to callbacks we have no choice
but keep track of the offloaded filter in the driver.

The check for nn->dp.bpf_offload_xdp was a stop gap solution
to make sure failed TC offload won't disable XDP, it's no longer
necessary.  nfp_net_bpf_offload() will return -EBUSY on
TC vs XDP conflicts.

Fixes: 3f7889c4 ("net: sched: cls_bpf: call block callbacks for offload")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

cls_bpf used to take care of tracking what offload state a filter
is in, i.e. it would track if offload request succeeded or not.
This information would then be used to issue correct requests to
the driver, e.g. requests for statistics only on offloaded filters,
removing only filters which were offloaded, using add instead of
replace if previous filter was not added etc.

This tracking of offload state no longer functions with the new
callback infrastructure.  There could be multiple entities trying
to offload the same filter.

Throw out all the tracking and corresponding commands and simply
pass to the drivers both old and new bpf program.  Drivers will
have to deal with offload state tracking by themselves.

Fixes: 3f7889c4 ("net: sched: cls_bpf: call block callbacks for offload")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

(I can trivially verify that that idr_remove in cleanup_net happens
 after the network namespace count has dropped to zero --EWB)

Function get_net_ns_by_id() does not check for net::count
after it has found a peer in netns_ids idr.

It may dereference a peer, after its count has already been
finaly decremented. This leads to double free and memory
corruption:

put_net(peer)                                   rtnl_lock()
atomic_dec_and_test(&peer->count) [count=0]     ...
__put_net(peer)                                 get_net_ns_by_id(net, id)
  spin_lock(&cleanup_list_lock)
  list_add(&net->cleanup_list, &cleanup_list)
  spin_unlock(&cleanup_list_lock)
queue_work()                                      peer = idr_find(&net->netns_ids, id)
  |                                               get_net(peer) [count=1]
  |                                               ...
  |                                               (use after final put)
  v                                               ...
  cleanup_net()                                   ...
    spin_lock(&cleanup_list_lock)                 ...
    list_replace_init(&cleanup_list, ..)          ...
    spin_unlock(&cleanup_list_lock)               ...
    ...                                           ...
    ...                                           put_net(peer)
    ...                                             atomic_dec_and_test(&peer->count) [count=0]
    ...                                               spin_lock(&cleanup_list_lock)
    ...                                               list_add(&net->cleanup_list, &cleanup_list)
    ...                                               spin_unlock(&cleanup_list_lock)
    ...                                             queue_work()
    ...                                           rtnl_unlock()
    rtnl_lock()                                   ...
    for_each_net(tmp) {                           ...
      id = __peernet2id(tmp, peer)                ...
      spin_lock_irq(&tmp->nsid_lock)              ...
      idr_remove(&tmp->netns_ids, id)             ...
      ...                                         ...
      net_drop_ns()                               ...
	net_free(peer)                            ...
    }                                             ...
  |
  v
  cleanup_net()
    ...
    (Second free of peer)

Also, put_net() on the right cpu may reorder with left's cpu
list_replace_init(&cleanup_list, ..), and then cleanup_list
will be corrupted.

Since cleanup_net() is executed in worker thread, while
put_net(peer) can happen everywhere, there should be
enough time for concurrent get_net_ns_by_id() to pick
the peer up, and the race does not seem to be unlikely.
The patch fixes the problem in standard way.

(Also, there is possible problem in peernet2id_alloc(), which requires
check for net::count under nsid_lock and maybe_get_net(peer), but
in current stable kernel it's used under rtnl_lock() and it has to be
safe. Openswitch begun to use peernet2id_alloc(), and possibly it should
be fixed too. While this is not in stable kernel yet, so I'll send
a separate message to netdev@ later).

Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Fixes: 0c7aecd4 "netns: add rtnl cmd to add and get peer netns ids"
Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Gregory CLEMENT says:

====================
Few mvneta fixes

here it is a small series of fixes found on the mvneta driver. They
had been already used in the vendor kernel and are now ported to
mainline.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

There are few reasons in mvneta_rx_swbm() function when received packet
is dropped. mvneta_rx_error() should be called only if error bit [16]
is set in rx descriptor.

[gregory.clement@free-electrons.com: add fixes tag]
Cc: stable@vger.kernel.org
Fixes: dc35a10f ("net: mvneta: bm: add support for hardware buffer management")
Signed-off-by: Yelena Krivosheev <yelena@marvell.com>
Tested-by: Dmitri Epshtein <dima@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When adding the RX queue association with each CPU, a typo was made in
the mvneta_cleanup_rxqs() function. This patch fixes it.

[gregory.clement@free-electrons.com: add commit log and fixes tag]
Cc: stable@vger.kernel.org
Fixes: 2dcf75e2 ("net: mvneta: Associate RX queues with each CPU")
Signed-off-by: Yelena Krivosheev <yelena@marvell.com>
Tested-by: Dmitri Epshtein <dima@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When port connect to PHY in polling mode (with poll interval 1 sec),
port and phy link status must be synchronize in order don't loss link
change event.

[gregory.clement@free-electrons.com: add fixes tag]
Cc: <stable@vger.kernel.org>
Fixes: c5aff182 ("net: mvneta: driver for Marvell Armada 370/XP network unit")
Signed-off-by: Yelena Krivosheev <yelena@marvell.com>
Tested-by: Dmitri Epshtein <dima@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

I'm getting various build failures on sparc64.  The key is
usually that the userland tools get built 32-bit.

1) clock_gettime() is in librt, so that must be added to the link
   libraries.

2) "sizeof(x)" must be printed with "%Z" printf prefix.
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

During unload, on mlx5_stop_eqs we move command interface from events
mode to polling mode, but if command interface EQ destroy fail we move
back to events mode.
That's wrong since even if we fail to destroy command interface EQ, we
do release its irq, so no interrupts will be received.

Fixes: e126ba97 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

When mlx5_stop_eqs fails to destroy any of the eqs it returns with an error.
In such failure flow the function will return without
releasing all EQs irqs and then pci_free_irq_vectors will fail.
Fix by only warn on destroy EQ failure and continue to release other
EQs and their irqs.

It fixes the following kernel trace:
kernel: kernel BUG at drivers/pci/msi.c:352!
...
...
kernel: Call Trace:
kernel: pci_disable_msix+0xd3/0x100
kernel: pci_free_irq_vectors+0xe/0x20
kernel: mlx5_load_one.isra.17+0x9f5/0xec0 [mlx5_core]

Fixes: e126ba97 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Flow steering priority and namespace are software only objects that
didn't have the proper destructors and were not freed during steering
cleanup.

Fix it by adding destructor functions for these objects.

Fixes: bd71b08e ("net/mlx5: Support multiple updates of steering rules in parallel")
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

When calling add/remove VXLAN port, a lock must be held in order to
prevent race scenarios when more than one add/remove happens at the
same time.
Fix by holding our state_lock (mutex) as done by all other parts of the
driver.
Note that the spinlock protecting the radix-tree is still needed in
order to synchronize radix-tree access from softirq context.

Fixes: b3f63c3d ("net/mlx5e: Add netdev support for VXLAN tunneling")
Signed-off-by: Gal Pressman <galp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

A refcount mechanism must be implemented in order to prevent unwanted
scenarios such as:
- Open an IPv4 VXLAN interface
- Open an IPv6 VXLAN interface (different socket)
- Remove one of the interfaces

With current implementation, the UDP port will be removed from our VXLAN
database and turn off the offloads for the other interface, which is
still active.
The reference count mechanism will only allow UDP port removals once all
consumers are gone.

Fixes: b3f63c3d ("net/mlx5e: Add netdev support for VXLAN tunneling")
Signed-off-by: Gal Pressman <galp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

mlx5e_vxlan_lookup_port is called both from mlx5e_add_vxlan_port (user
context) and mlx5e_features_check (softirq), but the lock acquired does
not disable bottom half and might result in deadlock. Fix it by simply
replacing spin_lock() with spin_lock_bh().
While at it, replace all unnecessary spin_lock_irq() to spin_lock_bh().

lockdep's WARNING: inconsistent lock state
[  654.028136] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
[  654.028229] swapper/5/0 [HC0[0]:SC1[9]:HE1:SE0] takes:
[  654.028321]  (&(&vxlan_db->lock)->rlock){+.?.}, at: [<ffffffffa06e7f0e>] mlx5e_vxlan_lookup_port+0x1e/0x50 [mlx5_core]
[  654.028528] {SOFTIRQ-ON-W} state was registered at:
[  654.028607]   _raw_spin_lock+0x3c/0x70
[  654.028689]   mlx5e_vxlan_lookup_port+0x1e/0x50 [mlx5_core]
[  654.028794]   mlx5e_vxlan_add_port+0x2e/0x120 [mlx5_core]
[  654.028878]   process_one_work+0x1e9/0x640
[  654.028942]   worker_thread+0x4a/0x3f0
[  654.029002]   kthread+0x141/0x180
[  654.029056]   ret_from_fork+0x24/0x30
[  654.029114] irq event stamp: 579088
[  654.029174] hardirqs last  enabled at (579088): [<ffffffff818f475a>] ip6_finish_output2+0x49a/0x8c0
[  654.029309] hardirqs last disabled at (579087): [<ffffffff818f470e>] ip6_finish_output2+0x44e/0x8c0
[  654.029446] softirqs last  enabled at (579030): [<ffffffff810b3b3d>] irq_enter+0x6d/0x80
[  654.029567] softirqs last disabled at (579031): [<ffffffff810b3c05>] irq_exit+0xb5/0xc0
[  654.029684] other info that might help us debug this:
[  654.029781]  Possible unsafe locking scenario:

[  654.029868]        CPU0
[  654.029908]        ----
[  654.029947]   lock(&(&vxlan_db->lock)->rlock);
[  654.030045]   <Interrupt>
[  654.030090]     lock(&(&vxlan_db->lock)->rlock);
[  654.030162]
 *** DEADLOCK ***

Fixes: b3f63c3d ("net/mlx5e: Add netdev support for VXLAN tunneling")
Signed-off-by: Gal Pressman <galp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

In error flow, when DESTROY_QP command should be executed, the wrong
mailbox was set with data, not the one that is written to hardware,
Fix that.

Fixes: 09a7d9ec '{net,IB}/mlx5: QP/XRCD commands via mlx5 ifc'
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Fix misspelling in word syndrome.

Fixes: e126ba97 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Fixes the bug when turning on/off CQE compression mechanism
resets the RX rings size to default value when it is not
needed.

Fixes: 2fc4bfb7 ("net/mlx5e: Dynamic RQ type infrastructure")
Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

The assumption that the next header field contains the transport
protocol is wrong for IPv6 packets with extension headers.
Instead, we should look the inner-most next header field in the buffer.
This will fix TSO offload for tunnels over IPv6 with extension headers.

Performance testing: 19.25x improvement, cool!
Measuring bandwidth of 16 threads TCP traffic over IPv6 GRE tap.
CPU: Intel(R) Xeon(R) CPU E5-2660 v2 @ 2.20GHz
NIC: Mellanox Technologies MT28800 Family [ConnectX-5 Ex]
TSO: Enabled
Before: 4,926.24  Mbps
Now   : 94,827.91 Mbps

Fixes: b3f63c3d ("net/mlx5e: Add netdev support for VXLAN tunneling")
Signed-off-by: Gal Pressman <galp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Fix bug that allows ets bw sum to be 0% when ets tc type exists.

Fixes: 08fb1dac ('net/mlx5e: Support DCBNL IEEE ETS')
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Reviewed-by: Huy Nguyen <huyn@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

In mlx5_ifc, struct size was not complete, and thus driver was sending
garbage after the last defined field. Fixed it by adding reserved field
to complete the struct size.

In addition, rename all set_rate_limit to set_pp_rate_limit to be
compliant with the Firmware <-> Driver definition.

Fixes: 7486216b ("{net,IB}/mlx5: mlx5_ifc updates")
Fixes: 1466cc5b ("net/mlx5: Rate limit tables support")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Before the offending commit, mlx5 core did the IRQ affinity itself,
and it seems that the new generic code have some drawbacks and one
of them is the lack for user ability to modify irq affinity after
the initial affinity values got assigned.

The issue is still being discussed and a solution in the new generic code
is required, until then we need to revert this patch.

This fixes the following issue:
echo <new affinity> > /proc/irq/<x>/smp_affinity
fails with  -EIO

This reverts commit a435393a.
Note: kept mlx5_get_vector_affinity in include/linux/mlx5/driver.h since
it is used in mlx5_ib driver.

Fixes: a435393a ("mlx5: move affinity hints assignments to generic code")
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jes Sorensen <jsorensen@fb.com>
Reported-by: Jes Sorensen <jsorensen@fb.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Currently, if a size of zero is passed to
mlx5_fpga_mem_{read|write}_i2c()
the "err" return value will not be initialized, which triggers gcc
warnings:

[..]/mlx5/core/fpga/sdk.c:87 mlx5_fpga_mem_read_i2c() error:
uninitialized symbol 'err'.
[..]/mlx5/core/fpga/sdk.c:115 mlx5_fpga_mem_write_i2c() error:
uninitialized symbol 'err'.

fix that.

Fixes: a9956d35 ('net/mlx5: FPGA, Add SBU infrastructure')
Signed-off-by: Kamal Heib <kamalh@mellanox.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>