Rename source file to drop any ambiguity.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220620101402.2684366-2-cezary.rojewski@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Judy Hsiao <judyhsiao@chromium.org>:

The patches series is to fix the unexpected large DC output
voltage of Max98357a that burns the speakers on the rockchip
platform when BCLK and SD_MODE are ON but LRCLK is OFF.

Merge series from Tinghan Shen <tinghan.shen@mediatek.com>:

Some updates to the DT bindings to make things less surprising for
users.

Commit 44f362c2 ("ASoC: rockchip: i2s: switch BCLK to GPIO") added
pinctrl lookups, but did not skip the lookup if there was no pinctrl
device tied to the I2S controller. As a result, the lookup was done
on an invalid pointer in such cases, causing a kernel panic.

Only do the subsequent pinctrl state lookups and switch if a pinctrl
device was found.

i2s_pinctrl_select_bclk_{on,off} already guard against missing pinctrl
device or pinctrl state, so those two functions aren't touched.

Fixes: 44f362c2 ("ASoC: rockchip: i2s: switch BCLK to GPIO")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20220621185747.2782-1-wens@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Even in the presence of problems (here: rn_acp_deinit() might fail), it's
important to unregister all resources acquired during .probe() because
even if .remove() returns an error code, the device is removed.

As .remove() is only called after .probe() returned success, platdata
must be valid, so the first check in .remove() can just be dropped.

This is a preparation for making platform remove callbacks return void.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220622061739.225966-1-u.kleine-koenig@pengutronix.deSigned-off-by: Mark Brown <broonie@kernel.org>

The function snd_soc_unregister_card() returned 0 unconditionally and most
callers don't care to check the return value. Make it return void and
adapt the callers that didn't ignore the return value before.

This is a preparation for making platform remove callbacks return void.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220621145834.198519-1-u.kleine-koenig@pengutronix.deSigned-off-by: Mark Brown <broonie@kernel.org>

Align clock names in mt8186 dsp driver with dt-bindings.
Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
Link: https://lore.kernel.org/r/20220622062245.21021-5-tinghan.shen@mediatek.comSigned-off-by: Mark Brown <broonie@kernel.org>

This patch adds mt8186 dsp document. The dsp is used for Sound Open
Firmware driver node. It includes registers, clocks, memory regions,
and mailbox for dsp.
Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220622062245.21021-4-tinghan.shen@mediatek.comSigned-off-by: Mark Brown <broonie@kernel.org>

Rename mbox according to actions instead of 'mbox0' and 'mbox1'
Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
Link: https://lore.kernel.org/r/20220622062245.21021-3-tinghan.shen@mediatek.comSigned-off-by: Mark Brown <broonie@kernel.org>

Rename mbox according to actions instead of 'mbox0' and 'mbox1'.
The 8195 dsp node, which uses this binding, has not yet been added to
the 8195 devicetree.
Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220622062245.21021-2-tinghan.shen@mediatek.comSigned-off-by: Mark Brown <broonie@kernel.org>

Needed for new development.

This patch documents pinctrl-names for i2s.
Signed-off-by: Judy Hsiao <judyhsiao@chromium.org>
Link: https://lore.kernel.org/r/20220619095324.492678-4-judyhsiao@chromium.orgSigned-off-by: Mark Brown <broonie@kernel.org>

We discoverd that the state of BCLK on, LRCLK off and SD_MODE on
may cause the speaker melting issue. Removing LRCLK while BCLK
is present can cause unexpected output behavior including a large
DC output voltage as described in the Max98357a datasheet.

In order to:
  1. prevent BCLK from turning on by other component.
  2. keep BCLK and LRCLK being present at the same time

This patch switches BCLK to GPIO func before LRCLK output, and
configures BCLK func back during LRCLK is output.

Without this fix, BCLK is turned on 11 ms earlier than LRCK by the
da7219.
With this fix, BCLK is turned on only 0.4 ms earlier than LRCK by
the rockchip codec.
Signed-off-by: Judy Hsiao <judyhsiao@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Link: https://lore.kernel.org/r/20220619095324.492678-2-judyhsiao@chromium.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Currently macros only exist for SX style (implicit sign bit 2's
compliment) volume controls where the volumes for left and right
are in separate registers. Some future Cirrus devices will have
both volumes in the same register, as such add a new macro to
support this.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220621102041.1713504-4-ckeepax@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

The initial settings will be written before the codec probe function.
But, the rt711->component doesn't be assigned yet.
If IO error happened during initial settings operations, it will cause the kernel panic.
This patch changed component->dev to slave->dev to fix this issue.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20220621090719.30558-1-shumingf@realtek.comSigned-off-by: Mark Brown <broonie@kernel.org>

Various boolean controls on cs35l41 are missing the required "Switch" in
the name, add these.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220621102041.1713504-3-ckeepax@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

The DRE controls on wm5110 should return a value of 1 if the DRE state
is actually changed, update to fix this.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220621102041.1713504-2-ckeepax@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

The preloader controls on ADSP should return a value of 1 if the
preloader value was changed, update to correct this.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220621102041.1713504-1-ckeepax@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Javier Martinez Canillas <javierm@redhat.com>:

This series contains fixes for a few issues found while testing the recent
support for drivers to define bulk read/write callbacks in regmap_config.

I tested this with drivers/gpu/drm/solomon/ssd130x-spi.c, by converting it
to use this new API instead of defining its own regmap bus for bulk write.

Patch #1 and patch #2 are fixes for regresions introduced by that commit
and patch #3 adds regmap_config provided bulk write support to functions
regmap_noinc_write() and regmap_bulk_write(), that were missed.

dmaengine_terminate_all() is deprecated and should no longer be used.
Use dmaengine_terminate_async() instead. This involves no functional change
since both functions do the same.
After dmaengine_terminate_async() dmaengine_synchronize() must be called
to make sure the channel has really stopped before the underlying memory
is freed. This is done implicitly by dma_release_channel() called from
the .hw_free hook.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20220617120133.4011846-1-s.hauer@pengutronix.deSigned-off-by: Mark Brown <broonie@kernel.org>

Update Banajit's email address from codeaurora.org to quicinc.com, as
codeaurora.org is not in use anymore.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220617210230.7685-1-srinivas.kandagatla@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

We discoverd that the state of BCLK on, LRCLK off and SD_MODE on
may cause the speaker melting issue. Removing LRCLK while BCLK
is present can cause unexpected output behavior including a large
DC output voltage as described in the Max98357a datasheet.

In order to:
  1. prevent BCLK from turning on by other component.
  2. keep BCLK and LRCLK being present at the same time

This patch switches BCLK to GPIO func before LRCLK output, and
configures BCLK func back during LRCLK is output.

Without this fix, BCLK is turned on 11 ms earlier than LRCK by the
da7219.
With this fix, BCLK is turned on only 0.4 ms earlier than LRCK by
the rockchip codec.
Signed-off-by: Judy Hsiao <judyhsiao@chromium.org>
Link: https://lore.kernel.org/r/20220615045643.3137287-1-judyhsiao@chromium.orgSigned-off-by: Mark Brown <broonie@kernel.org>

There are some functions that were missed by commit d77e7456 ("regmap:
Add bulk read/write callbacks into regmap_config") when support to define
bulk read/write callbacks in regmap_config was introduced.

The regmap_bulk_write() and regmap_noinc_write() functions weren't changed
to use the added map->write instead of the map->bus->write handler.

Also, the regmap_can_raw_write() was not modified to take map->write into
account. So will only return true if a bus with a .write callback is set.

Fixes: d77e7456 ("regmap: Add bulk read/write callbacks into regmap_config")
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20220616073435.1988219-4-javierm@redhat.comSigned-off-by: Mark Brown <broonie@kernel.org>

Before adding support to define bulk read/write callbacks in regmap_config
by the commit d77e7456 ("regmap: Add bulk read/write callbacks into
regmap_config"), the regmap_noinc_read() function returned an errno early
a map->bus->read callback wasn't set.

But that commit dropped the check and now a call to _regmap_raw_read() is
attempted even when bulk read operations are not supported. That function
checks for map->read anyways but there's no point to continue if the read
can't succeed.

Also is a fragile assumption to make so is better to make it fail earlier.

Fixes: d77e7456 ("regmap: Add bulk read/write callbacks into regmap_config")
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20220616073435.1988219-3-javierm@redhat.comSigned-off-by: Mark Brown <broonie@kernel.org>

Support for drivers to define bulk read/write callbacks in regmap_config
was introduced by the commit d77e7456 ("regmap: Add bulk read/write
callbacks into regmap_config"), but this commit wrongly dropped a check
in regmap_bulk_read() to determine whether bulk reads can be done or not.

Before that commit, it was checked if map->bus was set. Now has to check
if a map->read callback has been set.

Fixes: d77e7456 ("regmap: Add bulk read/write callbacks into regmap_config")
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20220616073435.1988219-2-javierm@redhat.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:

While testing driver bind/unbind sequences, I stumbled on a corner
case where the SoundWire bus can be suspended before the ASoC card
registration happens. During the registration, register accesses would
then lead to timeouts. This does not happen in regular usages where
the card registration happens within the 3-second time window before
suspend.

Adding a simple pm_runtime_resume_and_get() on component probe solves
the issue, but experiments showed it was too invasive to add at the
ASoC core level, with multiple regressions reported by our CI.

This patchset limits the additional resume to the SOF and SoundWire
codec drivers. An additional patch for the soundwire/intel component
will be sent separately.

Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:

The enablement of IMR-based DSP boot helped reduce resume latency, but
unfortunately the context is not saved in S4 and S5 which leads to
multiple reports of boot failures.

This patchset forces a full firmware reload/reboot when resuming from
S4/S5 and restores functionality.

Make sure that the bus and codecs are pm_runtime active when the card
is registered/created. This avoid timeouts when accessing registers.

BugLink: https://github.com/thesofproject/linux/issues/3651
BugLink: https://github.com/thesofproject/linux/issues/3650Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220616210825.132093-3-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Before initiating IPC and/or bus transactions when loading the
topology during a component probe, which happens on card
registration/creation, make sure the device for the SOF driver is
pm_runtime active.

The SOF probe is not necessarily followed by the component probe, such
a timing assumption can be broken in driver bind/unbind tests. This
can be artifially shown if the module for the machine driver is
'blacklisted' and the SOF device becomes pm_runtime_suspended before
manually calling modprobe to register the card.

In an initial experiment, pm_resume_and_get() was called from
soc-component.c, since the current ASoC component model is arguably
missing dependencies between component status and device
status. However this approach proved too invasive and breaks all
existing HDMI playback solutions on Intel platforms.

While this will result in duplication of code, generating pm_runtime
transitions only if strictly required for a given component makes more
sense overall. This patch adds the pm_runtime resume transition for
SOF only.

BugLink: https://github.com/thesofproject/linux/issues/3651Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220616210825.132093-2-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The lockdep mechanism revealed an unbalanced unlocking on MT8186:

  [    2.993966] WARNING: bad unlock balance detected!
  [    2.993978] -------------------------------------
  [    2.993983] kworker/u16:1/10 is trying to release lock (gpio_request_mutex) at:
  [    2.993994] [<ffffffdcd9adebf8>] mt8186_afe_gpio_request+0xf8/0x210
  [    2.994012] but there are no more locks to release!

The cause is that the mutex will be double unlocked if dai is unknown
during GPIO selection, and this patch fixes it.

Fixes: cfa9a966 ("ASoC: mediatek: mt8186: support gpio control in platform driver")
Signed-off-by: Fei Shao <fshao@chromium.org>
Link: https://lore.kernel.org/r/20220617111003.2014395-1-fshao@chromium.orgSigned-off-by: Mark Brown <broonie@kernel.org>

The standard snd_soc_info_volsw() allows a two value control to be
defined as an integer control only if the control name ends in
"Volume". It achieves this by creating a substring if it contains
" Volume", and ensuring this exists at the end of the name. The
volume substring is then used to decide whether the type is a
SNDRV_CTL_ELEM_TYPE_INTEGER or SNDRV_CTL_ELEM_TYPE_BOOLEAN.
However this volume substring is only computed for a two value
control.
This means for controls where there are more than two possible
values, the substring is never created, so in this case the
substring remains NULL, and the condition yields
SNDRV_CTL_ELEM_TYPE_BOOLEAN, even though there are more than 2
possible values.
If there are more than 2 possible values for the control,
then it should always be an integer control.

Fixes: aa2a4b89 ("ASoC: ops: Fix boolean/integer detection for simple controls")
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220617153606.2619457-1-sbinding@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:

This patchset adds the missing jack pin remapping needed by upstream
UCM on Chromebooks, suggested by Jaroslav Kysela [1].

These patches were succesfully tested on GeminiLake and JasperLake
platforms, and generalized to other Chromebooks.

[1] https://mailman.alsa-project.org/pipermail/sound-open-firmware/2022-June/004468.html

Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:

Remove warnings with make W=1

Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:

Cleanups suggested by Greg KH during SoundWire reviews, since the
__func__ information can be added with the dyndbg kernel parameter
[1].

The first two patches change the error level in cases where the use of
dev_dbg() was inconsistent with an aborted programming sequence.

[1] https://lore.kernel.org/alsa-devel/20220610023537.27223-2-yung-chuan.liao@linux.intel.com/

Legacy or non DT boot is no longer possible on systems where the
tw4030/5030 is used.

Drop the support for handling legacy pdata and replace it with a local
board_params struct to allow further cleanups on the mfd side.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20220616153521.29701-1-peter.ujfalusi@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

The module and function information can be added with
'modprobe foo dyndbg=+pmf'
Suggested-by: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220616215351.135643-14-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The module and function information can be added with
'modprobe foo dyndbg=+pmf'
Suggested-by: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220616215351.135643-13-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The module and function information can be added with
'modprobe foo dyndbg=+pmf'
Suggested-by: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220616215351.135643-12-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The module and function information can be added with
'modprobe foo dyndbg=+pmf'
Suggested-by: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220616215351.135643-11-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The module and function information can be added with
'modprobe foo dyndbg=+pmf'
Suggested-by: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220616215351.135643-10-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>