- 29 Jan, 2015 40 commits
-
-
Rafał Miłecki authored
This is stil incomplete, so we don't add PCI IDs of new devices yet. Purpose of this patch is to allow testing & adjusting rest of the code. Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Rafał Miłecki authored
There are some PCIe core fixes that need to be applied before accessing SPROM, otherwise reading it may fail. Signed-off-by:
-
Rafał Miłecki authored
This allows us to drop some #ifdef magic (mess). Signed-off-by:
-
Rafał Miłecki authored
Extracting values from it is still unsupported, but at least we'll display some meaningful error now. Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
-
Rafał Miłecki authored
These chipsets don't need changing clock mode. Signed-off-by:
-
Sujith Manoharan authored
On some AR955x/QCA953x boards, noise floor calibration gets stuck and the cause is a hardware/BB issue. To fix this, peak detect calibration in the HW is disabled and is done in the driver instead. There a few differences with the calibration routine for older chips like AR9331. Signed-off-by:
Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by:
-
Sujith Manoharan authored
The value is different for PCOEM cards and AR955x/AR953x. Signed-off-by:
-
Sujith Manoharan authored
The LNA gain setting override needs to be done only for AR9330 and PCOEM chips. Signed-off-by:
-
Sujith Manoharan authored
This can be used if we need to apply register settings for all PCOEM solutions (in the AR9003 family). Signed-off-by:
-
Sujith Manoharan authored
This patch disables HW peak detect calibration for AR955x, since it is problematic on a few boards. Instead, manual calibration will be done in the driver. Signed-off-by:
-
Sujith Manoharan authored
This patch disables HW peak detect calibration for QCA953x, since it is problematic on a few boards. Instead, manual calibration will be done in the driver. Signed-off-by:
-
Michael Büsch authored
b43 has a FIXME about locking in the mac80211 set-beacon-int callback for a long time. As it turns out there actually is a tiny race window that could result in a use-after-free bug of the 'current_beacon' memory. Nobody ever reported this, so it probably never happened. Fix this by adding a spin lock that protects the current_beacon access. We must not be in atomic context while accessing hardware (due to SDIO), so the beacon update bottom half has to clone the skb and release the lock before writing it to hardware. Let's all hope that this stops the troll who is trying to submit incorrect fixes for this issue repeatedly. And let's hope that I'm not a troll, too, who just hides even more evil code in an even more complex attempt to fix the issue. Signed-off-by:
Michael Buesch <m@bues.ch> Tested-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Avinash Patil authored
This patch enables 11h extensions in FW upon detecting DFS channel in start radar detection/channel switch handlers. Patch also takes care of disabling 11h when non DFS channels are to be set during start_ap handler. Signed-off-by:
Avinash Patil <patila@marvell.com> Signed-off-by:
Qingshui Gao <gaoqs@marvell.com> Signed-off-by:
Cathy Luo <cluo@marvell.com> Signed-off-by:
-
Avinash Patil authored
This patch adds cfg80211 channel_switch support for mwifiex. Upon receiving channel switch request, driver would parse channel switch announcement IE from beacon_data. If TX is blocked, netdev queues are stopped. IEs from csa_beacon are then parsed and set to FW. Signed-off-by:
-
Avinash Patil authored
This patch adds support for radar_detected event from FW. Driver in turn would stop netdev queues to stop TX traffic and issue RADAR_DETECT event to cfg80211. Signed-off-by:
-
Avinash Patil authored
This patch adds support for channel report enabling. Channel report event happens if radar is detected on specified channel after driver has issued radar detect command within CAC time. Driver in turn sends RADAR_DETECTED event to cfg80211 to tell radar was detected within CAC time. Signed-off-by:
-
Avinash Patil authored
This patch adds support for cfg80211 start_radar_detection handler. Upon reception of start_radar_detection, driver prepares radar detect command to FW. Delayed work is queued for CAC time which sends radar detection finished event to cfg80211. Signed-off-by:
-
Avinash Patil authored
Head & Tail IEs are supposed to be added to beacon and probe response. This patch adds separate function for parsing head and tail IEs from cfg80211_beacon_data and sets them to FW. Signed-off-by:
-
Avinash Patil authored
Refactor mwifiex_cfg80211_start_ap by creating separate function to set AP channel and another for configuring other AP parameters and starting AP. Signed-off-by:
-
Avinash Patil authored
This patch moves IE management routine to end of start_ap handler. IEs now would be updated after AP has started. Signed-off-by:
-
Avinash Patil authored
Store AP configuration in private structure so that we know current AP configuration. Signed-off-by:
-
Avinash Patil authored
When regulatory domain changes, cfg80211 already issues request to change regulatory domain to driver via reg_notifier. There is no need to set regulatory again during start_ap. Signed-off-by:
-
Avinash Patil authored
Currently, we support virtual interface type change from station<=>adhoc or station <=> p2p client/GO. This patch adds support to change virtual interface type to any of the type advertised in interface combinations. Signed-off-by:
Amitkumar Karwar <akarwar@marvell.com> Signed-off-by:
-
Avinash Patil authored
This patch adds support to handle PS events on AP interface as well. Signed-off-by:
-
Avinash Patil authored
Currently interface limits are checked by seeing if bss_mode for particular priv is set. If bss_mode is not set, interface creation is allowed. This patch adds framework to initializes maximum virtual interfaces supported during load time and check current number of interfaces created agains allowed interface limit during new virtual interface creation. Signed-off-by:
-
Avinash Patil authored
FW initialization routine can also be called while changing virtual interface types. This patch adds bool parameter "init" to init command routine so as to differentiate between initialization during driver load and change virtual interface handler. Signed-off-by:
-
Avinash Patil authored
This would be used to set mac address while changing virtual interface to different types. Signed-off-by:
-
Avinash Patil authored
wdev is used even after del_virtual_interface handler in cfg80211 in nl80211_post_doit. Since we have freed wdev in handling of del_virtual_intf, this can result into crash while deleting interface. Avoid this be not declaring wdev which part of mwifiex_private structure but struct wireless_dev type. Signed-off-by:
-
Avinash Patil authored
RTS threshold, fragmentation threshold are per device properties. Setting them on any interface would be reflected for all other interfaces as well. This patch removes unnesessary command download per interface. Signed-off-by:
-
Avinash Patil authored
This is not used anywhere execpt initialization. Signed-off-by:
-
Pramod Gurav authored
This change fixes below sparse error: drivers/ssb/main.c:94:16: warning: symbol 'ssb_sdio_func_to_bus' was not declared. Should it be static? Acked-by:
Pramod Gurav <pramod.gurav@smartplayin.com> Signed-off-by:
-
Arend van Spriel authored
The nvram file can hold a key=value combination in which the value may have spaces, ie. 'RAW1=80 02 fe ff'. The parsing functionality did not deal with this so it gives an error message: [621746.311635] brcmfmac: brcmf_nvram_handle_key warning: ln=90:col=11: '=' expected, skip invalid key entry because RAW1=80 is being considerd as key=value pair and it expects '=' sign after '02' for next key=value pair. This entry can be completely ignored as firmware does not need it. Reviewed-by:
Hante Meuleman <meuleman@broadcom.com> Reviewed-by:
Daniel (Deognyoun) Kim <dekim@broadcom.com> Reviewed-by:
Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by:
Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by:
Arend van Spriel <arend@broadcom.com> Signed-off-by:
-
Arend van Spriel authored
When revinfo retrieval fails we can not show the firmware version in ethtool driver info. Store the result to be used when handling ethtool driver info callback. Reviewed-by:
-
Arend van Spriel authored
The ethtool driver info already contained the unique firmware identifier. This patch adds the firmware release version. $ ethtool -i wlan4 driver: brcmfmac version: 6.10.224.22 firmware-version: 01-32bd010f Reviewed-by:
-
Arend van Spriel authored
Obtain device revision information and store it. Reviewed-by:
-
Arend van Spriel authored
In some scenarios the chip number and revision may not be provided by the bus layer. If the chip number is not filled, the common layer will ask the firmware for this information. Reviewed-by:
-
Arend van Spriel authored
Introducing a define that the caller of brcmu_boardrev_str() can use to allocate enough room for buffer passed to the function. Reviewed-by:
-
Arend van Spriel authored
In brcmf_usb_probe_cb() the device is checked to determine whether it is already running firmware. However, when no firmware download is needed it still continues to request the firmware files. This is fixed by returning after successful setup. Reviewed-by:
-
Hante Meuleman authored
During suspend the bus state is put in the down state. When data is being transmitted during this state then the netdev queue will be close. This patch will wake the queue on state data if the queue was closed. Reviewed-by:
-
