- 16 Jan, 2019 40 commits
-
-
Greg Kroah-Hartman authored
BugLink: https://bugs.launchpad.net/bugs/1810967 commit cb5d2194 upstream. Sasha has somehow been convinced into helping me with the stable kernel maintenance. Codify this slip in good judgement before he realizes what he really signed up for :) Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
Juerg Haefliger <juergh@canonical.com> Signed-off-by:
Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Aaron Ma authored
BugLink: https://bugs.launchpad.net/bugs/1810967 commit a5baeaea upstream. This definition is used by msecs_to_jiffies in milliseconds. According to the comments, max rexit timeout should be 20ms. Align with the comments to properly calculate the delay. Verified on Sunrise Point-LP and Cannon Lake. Cc: stable@vger.kernel.org Signed-off-by:
Aaron Ma <aaron.ma@canonical.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Dennis Wassenberg authored
BugLink: https://bugs.launchpad.net/bugs/1810967 commit 22454b79 upstream. This will clear the USB_PORT_FEAT_C_CONNECTION bit in case of a hub port reset only if a device is was attached to the hub port before resetting the hub port. Using a Lenovo T480s attached to the ultra dock it was not possible to detect some usb-c devices at the dock usb-c ports because the hub_port_reset code will clear the USB_PORT_FEAT_C_CONNECTION bit after the actual hub port reset. Using this device combo the USB_PORT_FEAT_C_CONNECTION bit was set between the actual hub port reset and the clear of the USB_PORT_FEAT_C_CONNECTION bit. This ends up with clearing the USB_PORT_FEAT_C_CONNECTION bit after the new device was attached such that it was not detected. This patch will not clear the USB_PORT_FEAT_C_CONNECTION bit if there is currently no device attached to the port before the hub port reset. This will avoid clearing the connection bit for new attached devices. Signed-off-by:
Dennis Wassenberg <dennis.wassenberg@secunet.com> Acked-by:
-
Greg Kroah-Hartman authored
BugLink: https://bugs.launchpad.net/bugs/1810958Signed-off-by:
-
Mathias Nyman authored
BugLink: https://bugs.launchpad.net/bugs/1810958 commit 2278446e upstream. Hub driver will try to disable a USB3 device twice at logical disconnect, racing with xhci_free_dev() callback from the first port disable. This can be triggered with "udisksctl power-off --block-device <disk>" or by writing "1" to the "remove" sysfs file for a USB3 device in 4.17-rc4. USB3 devices don't have a similar disabled link state as USB2 devices, and use a U3 suspended link state instead. In this state the port is still enabled and connected. hub_port_connect() first disconnects the device, then later it notices that device is still enabled (due to U3 states) it will try to disable the port again (set to U3). The xhci_free_dev() called during device disable is async, so checking for existing xhci->devs[i] when setting link state to U3 the second time was successful, even if device was being freed. The regression was caused by, and whole thing revealed by, Commit 44a182b9 ("xhci: Fix use-after-free in xhci_free_virt_device") which sets xhci->devs[i]->udev to NULL before xhci_virt_dev() returned. and causes a NULL pointer dereference the second time we try to set U3. Fix this by checking xhci->devs[i]->udev exists before setting link state. The original patch went to stable so this fix needs to be applied there as well. Fixes: 44a182b9 ("xhci: Fix use-after-free in xhci_free_virt_device") Cc: <stable@vger.kernel.org> Reported-by:
Jordan Glover <Golden_Miller83@protonmail.ch> Tested-by:
-
Eric Biggers authored
BugLink: https://bugs.launchpad.net/bugs/1810958 commit 8c01db76 upstream. When a UHID_CREATE command is written to the uhid char device, a copy_from_user() is done from a user pointer embedded in the command. When the address limit is KERNEL_DS, e.g. as is the case during sys_sendfile(), this can read from kernel memory. Alternatively, information can be leaked from a setuid binary that is tricked to write to the file descriptor. Therefore, forbid UHID_CREATE in these cases. No other commands in uhid_char_write() are affected by this bug and UHID_CREATE is marked as "obsolete", so apply the restriction to UHID_CREATE only rather than to uhid_char_write() entirely. Thanks to Dmitry Vyukov for adding uhid definitions to syzkaller and to Jann Horn for commit 9da3f2b7 ("x86/fault: BUG() when uaccess helpers fault on kernel addresses"), allowing this bug to be found. Reported-by: syzbot+72473edc9bf4eb1c6556@syzkaller.appspotmail.com Fixes: d365c6cf ("HID: uhid: add UHID_CREATE and UHID_DESTROY events") Cc: <stable@vger.kernel.org> # v3.6+ Cc: Jann Horn <jannh@google.com> Cc: Andy Lutomirski <luto@kernel.org> Signed-off-by:
Eric Biggers <ebiggers@google.com> Reviewed-by:
Jann Horn <jannh@google.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Al Viro authored
BugLink: https://bugs.launchpad.net/bugs/1810958 commit db68ce10 upstream. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> [only take the include/linux/uaccess.h portion - gregkh] Signed-off-by:
-
Hans de Goede authored
BugLink: https://bugs.launchpad.net/bugs/1810958 commit 2bbb5fa3 upstream. Many HP AMD based laptops contain an SMB0001 device like this: Device (SMBD) { Name (_HID, "SMB0001") // _HID: Hardware ID Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings { IO (Decode16, 0x0B20, // Range Minimum 0x0B20, // Range Maximum 0x20, // Alignment 0x20, // Length ) IRQ (Level, ActiveLow, Shared, ) {7} }) } The legacy style IRQ resource here causes acpi_dev_get_irqresource() to be called with legacy=true and this message to show in dmesg: ACPI: IRQ 7 override to edge, high This causes issues when later on the AMD0030 GPIO device gets enumerated: Device (GPIO) { Name (_HID, "AMDI0030") // _HID: Hardware ID Name (_CID, "AMDI0030") // _CID: Compatible ID Name (_UID, Zero) // _UID: Unique ID Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings { Name (RBUF, ResourceTemplate () { Interrupt (ResourceConsumer, Level, ActiveLow, Shared, ,, ) { 0x00000007, } Memory32Fixed (ReadWrite, 0xFED81500, // Address Base 0x00000400, // Address Length ) }) Return (RBUF) /* \_SB_.GPIO._CRS.RBUF */ } } Now acpi_dev_get_irqresource() gets called with legacy=false, but because of the earlier override of the trigger-type acpi_register_gsi() returns -EBUSY (because we try to register the same interrupt with a different trigger-type) and we end up setting IORESOURCE_DISABLED in the flags. The setting of IORESOURCE_DISABLED causes platform_get_irq() to call acpi_irq_get() which is not implemented on x86 and returns -EINVAL. resulting in the following in dmesg: amd_gpio AMDI0030:00: Failed to get gpio IRQ: -22 amd_gpio: probe of AMDI0030:00 failed with error -22 The SMB0001 is a "virtual" device in the sense that the only way the OS interacts with it is through calling a couple of methods to do SMBus transfers. As such it is weird that it has IO and IRQ resources at all, because the driver for it is not expected to ever access the hardware directly. The Linux driver for the SMB0001 device directly binds to the acpi_device through the acpi_bus, so we do not need to instantiate a platform_device for this ACPI device. This commit adds the SMB0001 HID to the forbidden_id_list, avoiding the instantiating of a platform_device for it. Not instantiating a platform_device means we will no longer call acpi_dev_get_irqresource() for the legacy IRQ resource fixing the probe of the AMDI0030 device failing. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1644013 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=198715 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199523Reported-by:
Lukas Kahnert <openproggerfreak@gmail.com> Tested-by:
Marc <suaefar@googlemail.com> Cc: All applicable <stable@vger.kernel.org> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Gustavo A. R. Silva authored
BugLink: https://bugs.launchpad.net/bugs/1810958 commit fee05f45 upstream. req.gid can be indirectly controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: vers/misc/sgi-gru/grukdump.c:200 gru_dump_chiplet_request() warn: potential spectre issue 'gru_base' [w] Fix this by sanitizing req.gid before calling macro GID_TO_GRU, which uses it to index gru_base. Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2 Cc: stable@vger.kernel.org Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
Mattias Jacobsson authored
BugLink: https://bugs.launchpad.net/bugs/1810958 commit f6501f49 upstream. Add another Apple Cinema Display to the list of supported displays Signed-off-by:
Mattias Jacobsson <2pi@mok.nu> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Nathan Chancellor authored
BugLink: https://bugs.launchpad.net/bugs/1810958 commit 7c973012 upstream. After building the kernel with Clang, the following section mismatch warning appears: WARNING: vmlinux.o(.text+0x3bf19a6): Section mismatch in reference from the function ssc_probe() to the function .init.text:atmel_ssc_get_driver_data() The function ssc_probe() references the function __init atmel_ssc_get_driver_data(). This is often because ssc_probe lacks a __init annotation or the annotation of atmel_ssc_get_driver_data is wrong. Remove __init from atmel_ssc_get_driver_data to get rid of the mismatch. Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Emmanuel Pescosta authored
BugLink: https://bugs.launchpad.net/bugs/1810958 commit a7711257 upstream. Following on from this patch: https://lkml.org/lkml/2017/11/3/516, Corsair K70 LUX RGB keyboards also require the DELAY_INIT quirk to start correctly at boot. Dmesg output: usb 1-6: string descriptor 0 read error: -110 usb 1-6: New USB device found, idVendor=1b1c, idProduct=1b33 usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-6: can't set config #1, error -110 Signed-off-by:
Emmanuel Pescosta <emmanuelpescosta099@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Kai-Heng Feng authored
BugLink: https://bugs.launchpad.net/bugs/1810958 commit deefd242 upstream. Raydium USB touchscreen fails to set config if LPM is enabled: [ 2.030658] usb 1-8: New USB device found, idVendor=2386, idProduct=3119 [ 2.030659] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.030660] usb 1-8: Product: Raydium Touch System [ 2.030661] usb 1-8: Manufacturer: Raydium Corporation [ 7.132209] usb 1-8: can't set config #1, error -110 Same behavior can be observed on 2386:3114. Raydium claims the touchscreen supports LPM under Windows, so I used Microsoft USB Test Tools (MUTT) [1] to check its LPM status. MUTT shows that the LPM doesn't work under Windows, either. So let's just disable LPM for Raydium touchscreens. [1] https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/usb-test-toolsSigned-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Maarten Jacobs authored
BugLink: https://bugs.launchpad.net/bugs/1810958 commit 63529eaa upstream. The cdc-acm kernel module currently does not support the Hiro (Conexant) H05228 USB modem. The patch below adds the device specific information: idVendor 0x0572 idProduct 0x1349 Signed-off-by:
Maarten Jacobs <maarten256@outlook.com> Acked-by:
Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Dan Carpenter authored
BugLink: https://bugs.launchpad.net/bugs/1810958 commit 43279819 upstream. I was trying to solve a double free but I introduced a more serious NULL dereference bug. The problem is that if there is an IRQ which triggers immediately, then we need "info->uio_dev" but it's not set yet. This patch puts the original initialization back to how it was and just sets info->uio_dev to NULL on the error path so it should solve both the Oops and the double free. Fixes: f019f07e ("uio: potential double frees if __uio_register_device() fails") Reported-by:
Mathias Thore <Mathias.Thore@infinera.com> Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: stable <stable@vger.kernel.org> Tested-by:
-
Sakari Ailus authored
BugLink: https://bugs.launchpad.net/bugs/1810958 commit 92539d3e upstream. Patch ad608fbc changed how events were subscribed to address an issue elsewhere. As a side effect of that change, the "add" callback was called before the event subscription was added to the list of subscribed events, causing the first event queued by the add callback (and possibly other events arriving soon afterwards) to be lost. Fix this by adding the subscription to the list before calling the "add" callback, and clean up afterwards if that fails. Fixes: ad608fbc ("media: v4l: event: Prevent freeing event subscriptions while accessed") Reported-by:
Dave Stevenson <dave.stevenson@raspberrypi.org> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by:
Hans Verkuil <hans.verkuil@cisco.com> Tested-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> [Sakari Ailus: Backported to v4.9 stable] Signed-off-by:
-
Hans Verkuil authored
BugLink: https://bugs.launchpad.net/bugs/1810958 This reverts commit 46431d9c. This commit fixes a bug in upstream commit a136f59c ("vb2: Move buffer cache synchronisation to prepare from queue") which isn't present in 4.4. So as a result you get an UNBALANCED message in the kernel log if this patch is applied: vb2: counters for queue ffffffc0f3687478, buffer 3: UNBALANCED! vb2: buf_init: 1 buf_cleanup: 1 buf_prepare: 805 buf_finish: 805 vb2: buf_queue: 806 buf_done: 806 vb2: alloc: 0 put: 0 prepare: 806 finish: 805 mmap: 0 vb2: get_userptr: 0 put_userptr: 0 vb2: attach_dmabuf: 1 detach_dmabuf: 1 map_dmabuf: 805 unmap_dmabuf: 805 vb2: get_dmabuf: 0 num_users: 1609 vaddr: 0 cookie: 805 Reverting this patch solves this regression. Signed-off-by:
-
Lu Fengqi authored
BugLink: https://bugs.launchpad.net/bugs/1810958 commit fcd5e742 upstream. When running generic/475, we may get the following warning in dmesg: [ 6902.102154] WARNING: CPU: 3 PID: 18013 at fs/btrfs/extent-tree.c:9776 btrfs_free_block_groups+0x2af/0x3b0 [btrfs] [ 6902.109160] CPU: 3 PID: 18013 Comm: umount Tainted: G W O 4.19.0-rc8+ #8 [ 6902.110971] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 [ 6902.112857] RIP: 0010:btrfs_free_block_groups+0x2af/0x3b0 [btrfs] [ 6902.118921] RSP: 0018:ffffc9000459bdb0 EFLAGS: 00010286 [ 6902.120315] RAX: ffff880175050bb0 RBX: ffff8801124a8000 RCX: 0000000000170007 [ 6902.121969] RDX: 0000000000000002 RSI: 0000000000170007 RDI: ffffffff8125fb74 [ 6902.123716] RBP: ffff880175055d10 R08: 0000000000000000 R09: 0000000000000000 [ 6902.125417] R10: 0000000000000000 R11: 0000000000000000 R12: ffff880175055d88 [ 6902.127129] R13: ffff880175050bb0 R14: 0000000000000000 R15: dead000000000100 [ 6902.129060] FS: 00007f4507223780(0000) GS:ffff88017ba00000(0000) knlGS:0000000000000000 [ 6902.130996] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6902.132558] CR2: 00005623599cac78 CR3: 000000014b700001 CR4: 00000000003606e0 [ 6902.134270] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 6902.135981] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 6902.137836] Call Trace: [ 6902.138939] close_ctree+0x171/0x330 [btrfs] [ 6902.140181] ? kthread_stop+0x146/0x1f0 [ 6902.141277] generic_shutdown_super+0x6c/0x100 [ 6902.142517] kill_anon_super+0x14/0x30 [ 6902.143554] btrfs_kill_super+0x13/0x100 [btrfs] [ 6902.144790] deactivate_locked_super+0x2f/0x70 [ 6902.146014] cleanup_mnt+0x3b/0x70 [ 6902.147020] task_work_run+0x9e/0xd0 [ 6902.148036] do_syscall_64+0x470/0x600 [ 6902.149142] ? trace_hardirqs_off_thunk+0x1a/0x1c [ 6902.150375] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 6902.151640] RIP: 0033:0x7f45077a6a7b [ 6902.157324] RSP: 002b:00007ffd589f3e68 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 [ 6902.159187] RAX: 0000000000000000 RBX: 000055e8eec732b0 RCX: 00007f45077a6a7b [ 6902.160834] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 000055e8eec73490 [ 6902.162526] RBP: 0000000000000000 R08: 000055e8eec734b0 R09: 00007ffd589f26c0 [ 6902.164141] R10: 0000000000000000 R11: 0000000000000246 R12: 000055e8eec73490 [ 6902.165815] R13: 00007f4507ac61a4 R14: 0000000000000000 R15: 00007ffd589f40d8 [ 6902.167553] irq event stamp: 0 [ 6902.168998] hardirqs last enabled at (0): [<0000000000000000>] (null) [ 6902.170731] hardirqs last disabled at (0): [<ffffffff810cd810>] copy_process.part.55+0x3b0/0x1f00 [ 6902.172773] softirqs last enabled at (0): [<ffffffff810cd810>] copy_process.part.55+0x3b0/0x1f00 [ 6902.174671] softirqs last disabled at (0): [<0000000000000000>] (null) [ 6902.176407] ---[ end trace 463138c2986b275c ]--- [ 6902.177636] BTRFS info (device dm-3): space_info 4 has 273465344 free, is not full [ 6902.179453] BTRFS info (device dm-3): space_info total=276824064, used=4685824, pinned=18446744073708158976, reserved=0, may_use=0, readonly=65536 In the above line there's "pinned=18446744073708158976" which is an unsigned u64 value of -1392640, an obvious underflow. When transaction_kthread is running cleanup_transaction(), another fsstress is running btrfs_commit_transaction(). The btrfs_finish_extent_commit() may get the same range as btrfs_destroy_pinned_extent() got, which causes the pinned underflow. Fixes: d4b450cd ("Btrfs: fix race between transaction commit and empty block group removal") CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Lu Fengqi <lufq.fnst@cn.fujitsu.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Andreas Gruenbacher authored
BugLink: https://bugs.launchpad.net/bugs/1810958 commit 10283ea5 upstream. gfs2_put_super calls gfs2_clear_rgrpd to destroy the gfs2_rgrpd objects attached to the resource group glocks. That function should release the buffers attached to the gfs2_bitmap objects (bi_bh), but the call to gfs2_rgrp_brelse for doing that is missing. When gfs2_releasepage later runs across these buffers which are still referenced, it refuses to free them. This causes the pages the buffers are attached to to remain referenced as well. With enough mount/unmount cycles, the system will eventually run out of memory. Fix this by adding the missing call to gfs2_rgrp_brelse in gfs2_clear_rgrpd. (Also fix a gfs2_rgrp_relse -> gfs2_rgrp_brelse typo in a comment.) Fixes: 39b0f1e9 ("GFS2: Don't brelse rgrp buffer_heads every allocation") Cc: stable@vger.kernel.org # v4.4 Signed-off-by:
Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by:
-
YueHaibing authored
BugLink: https://bugs.launchpad.net/bugs/1810958 [ Upstream commit 025911a5 ] There is no need to have the '__be32 *p' variable static since new value always be assigned before use it. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Cc: stable@vger.kernel.org Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Minchan Kim authored
BugLink: https://bugs.launchpad.net/bugs/1810958 commit fef912bf upstream. commit 98af4d4d upstream. I got a report from Howard Chen that he saw zram and sysfs race(ie, zram block device file is created but sysfs for it isn't yet) when he tried to create new zram devices via hotadd knob. v4.20 kernel fixes it by [1, 2] but it's too large size to merge into -stable so this patch fixes the problem by registering defualt group by Greg KH's approach[3]. This patch should be applied to every stable tree [3.16+] currently existing from kernel.org because the problem was introduced at 2.6.37 by [4]. [1] fef912bf, block: genhd: add 'groups' argument to device_add_disk [2] 98af4d4d, zram: register default groups with device_add_disk() [3] http://kroah.com/log/blog/2013/06/26/how-to-create-a-sysfs-file-correctly/ [4] 33863c21, Staging: zram: Replace ioctls with sysfs interface Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Hannes Reinecke <hare@suse.com> Tested-by:
Howard Chen <howardsoc@google.com> Signed-off-by:
Minchan Kim <minchan@kernel.org> Signed-off-by:
-
Jeremy Linton authored
BugLink: https://bugs.launchpad.net/bugs/1810958 [ Upstream commit 313a06e6 ] The lib/raid6/test fails to build the neon objects on arm64 because the correct machine type is 'aarch64'. Once this is correctly enabled, the neon recovery objects need to be added to the build. Reviewed-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Jeremy Linton <jeremy.linton@arm.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Geert Uytterhoeven authored
BugLink: https://bugs.launchpad.net/bugs/1810958 [ Upstream commit e3e61f01 ] If gcc decides not to inline make_sensor_label(): WARNING: vmlinux.o(.text+0x4df549c): Section mismatch in reference from the function .create_device_attrs() to the function .init.text:.make_sensor_label() The function .create_device_attrs() references the function __init .make_sensor_label(). This is often because .create_device_attrs lacks a __init annotation or the annotation of .make_sensor_label is wrong. As .probe() can be called after freeing of __init memory, all __init annotiations in the driver are bogus, and should be removed. Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Taehee Yoo authored
BugLink: https://bugs.launchpad.net/bugs/1810958 [ Upstream commit 54451f60 ] When IDLETIMER rule is added, sysfs file is created under /sys/class/xt_idletimer/timers/ But some label name shouldn't be used. ".", "..", "power", "uevent", "subsystem", etc... So that sysfs filename checking routine is needed. test commands: %iptables -I INPUT -j IDLETIMER --timeout 1 --label "power" splat looks like: [95765.423132] sysfs: cannot create duplicate filename '/devices/virtual/xt_idletimer/timers/power' [95765.433418] CPU: 0 PID: 8446 Comm: iptables Not tainted 4.19.0-rc6+ #20 [95765.449755] Call Trace: [95765.449755] dump_stack+0xc9/0x16b [95765.449755] ? show_regs_print_info+0x5/0x5 [95765.449755] sysfs_warn_dup+0x74/0x90 [95765.449755] sysfs_add_file_mode_ns+0x352/0x500 [95765.449755] sysfs_create_file_ns+0x179/0x270 [95765.449755] ? sysfs_add_file_mode_ns+0x500/0x500 [95765.449755] ? idletimer_tg_checkentry+0x3e5/0xb1b [xt_IDLETIMER] [95765.449755] ? rcu_read_lock_sched_held+0x114/0x130 [95765.449755] ? __kmalloc_track_caller+0x211/0x2b0 [95765.449755] ? memcpy+0x34/0x50 [95765.449755] idletimer_tg_checkentry+0x4e2/0xb1b [xt_IDLETIMER] [ ... ] Fixes: 0902b469 ("netfilter: xtables: idletimer target implementation") Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Jozsef Kadlecsik authored
BugLink: https://bugs.launchpad.net/bugs/1810958 [ Upstream commit 17b8b74c ] The function is called when rcu_read_lock() is held and not when rcu_read_lock_bh() is held. Signed-off-by:
Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by:
-
Justin M. Forbes authored
BugLink: https://bugs.launchpad.net/bugs/1810958 [ Upstream commit a541f0eb ] Fixes: ERROR: "__node_distance" [drivers/nvme/host/nvme-core.ko] undefined! make[1]: *** [scripts/Makefile.modpost:92: __modpost] Error 1 make: *** [Makefile:1275: modules] Error 2 + exit 1 Signed-off-by:
Justin M. Forbes <jforbes@fedoraproject.org> Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Eric Westbrook authored
BugLink: https://bugs.launchpad.net/bugs/1810958 [ Upstream commit 886503f3 ] Allow /0 as advertised for hash:net,port,net sets. For "hash:net,port,net", ipset(8) says that "either subnet is permitted to be a /0 should you wish to match port between all destinations." Make that statement true. Before: # ipset create cidrzero hash:net,port,net # ipset add cidrzero 0.0.0.0/0,12345,0.0.0.0/0 ipset v6.34: The value of the CIDR parameter of the IP address is invalid # ipset create cidrzero6 hash:net,port,net family inet6 # ipset add cidrzero6 ::/0,12345,::/0 ipset v6.34: The value of the CIDR parameter of the IP address is invalid After: # ipset create cidrzero hash:net,port,net # ipset add cidrzero 0.0.0.0/0,12345,0.0.0.0/0 # ipset test cidrzero 192.168.205.129,12345,172.16.205.129 192.168.205.129,tcp:12345,172.16.205.129 is in set cidrzero. # ipset create cidrzero6 hash:net,port,net family inet6 # ipset add cidrzero6 ::/0,12345,::/0 # ipset test cidrzero6 fe80::1,12345,ff00::1 fe80::1,tcp:12345,ff00::1 is in set cidrzero6. See also: https://bugzilla.kernel.org/show_bug.cgi?id=200897 https://github.com/ewestbrook/linux/commit/df7ff6efb0934ab6acc11f003ff1a7580d6c1d9cSigned-off-by:
Eric Westbrook <linux@westbrook.io> Signed-off-by:
-
Vasily Gorbik authored
BugLink: https://bugs.launchpad.net/bugs/1810958 [ Upstream commit b44b136a ] According to Documentation/kbuild/makefiles.txt all build targets using if_changed should use FORCE as well. Add missing FORCE to make sure vdso targets are rebuild properly when not just immediate prerequisites have changed but also when build command differs. Reviewed-by:
Philipp Rudo <prudo@linux.ibm.com> Signed-off-by:
Vasily Gorbik <gor@linux.ibm.com> Signed-off-by:
-
Nathan Chancellor authored
BugLink: https://bugs.launchpad.net/bugs/1810958 [ Upstream commit b5bb4258 ] Clang warns that if the default case is taken, ret will be uninitialized. ./arch/arm64/include/asm/percpu.h:196:2: warning: variable 'ret' is used uninitialized whenever switch default is taken [-Wsometimes-uninitialized] default: ^~~~~~~ ./arch/arm64/include/asm/percpu.h:200:9: note: uninitialized use occurs here return ret; ^~~ ./arch/arm64/include/asm/percpu.h:157:19: note: initialize the variable 'ret' to silence this warning unsigned long ret, loop; ^ = 0 This warning appears several times while building the erofs filesystem. While it's not strictly wrong, the BUILD_BUG will prevent this from becoming a true problem. Initialize ret to 0 in the default case right before the BUILD_BUG to silence all of these warnings. Reported-by:
Prasad Sodagudi <psodagud@codeaurora.org> Signed-off-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Dennis Zhou <dennis@kernel.org> Signed-off-by:
-
Paul Gortmaker authored
BugLink: https://bugs.launchpad.net/bugs/1810958 [ Upstream commit 684238d7 ] To fix: acerhdf: unknown (unsupported) BIOS version Gateway /LT31 /v1.3307 , please report, aborting! As can be seen in the context, the BIOS registers haven't changed in the previous versions, so the assumption is they won't have changed in this last update for this somewhat older platform either. Cc: Peter Feuerer <peter@piie.net> Cc: Darren Hart <dvhart@infradead.org> Cc: Andy Shevchenko <andy@infradead.org> Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by:
Peter Feuerer <peter@piie.net> Signed-off-by:
-
Marek Szyprowski authored
BugLink: https://bugs.launchpad.net/bugs/1810958 [ Upstream commit b3322802 ] Ensure that clocks for core SoC modules (including TZPC0..9 modules) are enabled for suspend/resume cycle. This fixes suspend/resume support on Exynos5422-based Odroid XU3/XU4 boards. Suggested-by:
Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Sylwester Nawrocki <snawrocki@kernel.org> Signed-off-by:
-
Chengguang Xu authored
BugLink: https://bugs.launchpad.net/bugs/1810958 [ Upstream commit 515f1867 ] There are some cases can cause memory leak when parsing option 'osdname'. Signed-off-by:
Chengguang Xu <cgxu519@gmx.com> Signed-off-by:
-
Richard Weinberger authored
BugLink: https://bugs.launchpad.net/bugs/1810958 [ Upstream commit 7ff1e34b ] Fixes: arch/um/os-Linux/skas/process.c:613:1: warning: control reaches end of non-void function [-Wreturn-type] longjmp() never returns but gcc still warns that the end of the function can be reached. Add a return code and debug aid to detect this impossible case. Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Ernesto A. Fernández authored
BugLink: https://bugs.launchpad.net/bugs/1810958 [ Upstream commit 0a3021d4 ] Creating, renaming or deleting a file may cause catalog corruption and data loss. This bug is randomly triggered by xfstests generic/027, but here is a faster reproducer: truncate -s 50M fs.iso mkfs.hfsplus fs.iso mount fs.iso /mnt i=100 while [ $i -le 150 ]; do touch /mnt/$i &>/dev/null ((++i)) done i=100 while [ $i -le 150 ]; do mv /mnt/$i /mnt/$(perl -e "print $i x82") &>/dev/null ((++i)) done umount /mnt fsck.hfsplus -n fs.iso The bug is triggered whenever hfs_brec_update_parent() needs to split the root node. The height of the btree is not increased, which leaves the new node orphaned and its records lost. Link: http://lkml.kernel.org/r/26d882184fc43043a810114258f45277752186c7.1535682461.git.ernesto.mnd.fernandez@gmail.comSigned-off-by:
Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Ernesto A. Fernández authored
BugLink: https://bugs.launchpad.net/bugs/1810958 [ Upstream commit d057c036 ] This bug is triggered whenever hfs_brec_update_parent() needs to split the root node. The height of the btree is not increased, which leaves the new node orphaned and its records lost. It is not possible for this to happen on a valid hfs filesystem because the index nodes have fixed length keys. For reasons I ignore, the hfs module does have support for a number of hfsplus features. A corrupt btree header may report variable length keys and trigger this bug, so it's better to fix it. Link: http://lkml.kernel.org/r/9750b1415685c4adca10766895f6d5ef12babdb0.1535682463.git.ernesto.mnd.fernandez@gmail.comSigned-off-by:
-
Jann Horn authored
BugLink: https://bugs.launchpad.net/bugs/1810958 [ Upstream commit b10298d5 ] fill_with_dentries() failed to propagate errors up to reiserfs_for_each_xattr() properly. Plumb them through. Note that reiserfs_for_each_xattr() is only used by reiserfs_delete_xattrs() and reiserfs_chown_xattrs(). The result of reiserfs_delete_xattrs() is discarded anyway, the only difference there is whether a warning is printed to dmesg. The result of reiserfs_chown_xattrs() does matter because it can block chowning of the file to which the xattrs belong; but either way, the resulting state can have misaligned ownership, so my patch doesn't improve things greatly. Credit for making me look at this code goes to Al Viro, who pointed out that the ->actor calling convention is suboptimal and should be changed. Link: http://lkml.kernel.org/r/20180802163335.83312-1-jannh@google.comSigned-off-by:
-
Matthias Kaehlcke authored
BugLink: https://bugs.launchpad.net/bugs/1810958 commit 9e8730b1 upstream. With the following commit: 8f918697 ("x86/build: Fix stack alignment for CLang") cc-option is only used to determine the name of the stack alignment option supported by the compiler, but not to verify that the actual parameter <option>=N is valid in combination with the other CFLAGS. This causes problems (as reported by the kbuild robot) with older GCC versions which only support stack alignment on a boundary of 16 bytes or higher. Also use (__)cc_option to add the stack alignment option to CFLAGS to make sure only valid options are added. Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
Matthias Kaehlcke <mka@chromium.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Bernhard.Rosenkranzer@linaro.org Cc: Greg Hackmann <ghackmann@google.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Michael Davidson <md@google.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Hines <srhines@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dianders@chromium.org Fixes: 8f918697 ("x86/build: Fix stack alignment for CLang") Link: http://lkml.kernel.org/r/20170817182047.176752-1-mka@chromium.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Matthias Kaehlcke authored
BugLink: https://bugs.launchpad.net/bugs/1810958 commit 8f918697 upstream. Commit: d77698df ("x86/build: Specify stack alignment for clang") intended to use the same stack alignment for clang as with gcc. The two compilers use different options to configure the stack alignment (gcc: -mpreferred-stack-boundary=n, clang: -mstack-alignment=n). The above commit assumes that the clang option uses the same parameter type as gcc, i.e. that the alignment is specified as 2^n. However clang interprets the value of this option literally to use an alignment of n, in consequence the stack remains misaligned. Change the values used with -mstack-alignment to be the actual alignment instead of a power of two. cc-option isn't used here with the typical pattern of KBUILD_CFLAGS += $(call cc-option ...). The reason is that older gcc versions don't support the -mpreferred-stack-boundary option, since cc-option doesn't verify whether the alternative option is valid it would incorrectly select the clang option -mstack-alignment.. Signed-off-by:
-
Michael Davidson authored
BugLink: https://bugs.launchpad.net/bugs/1810958 commit 18d5e6c3 upstream. undef memcpy() and friends in boot/string.c so that the functions defined here will have the correct names, otherwise we end up up trying to redefine __builtin_memcpy() etc. Surprisingly, GCC allows this (and, helpfully, discards the __builtin_ prefix from the function name when compiling it), but clang does not. Adding these #undef's appears to preserve what I assume was the original intent of the code. Signed-off-by:
Michael Davidson <md@google.com> Signed-off-by:
H. Peter Anvin <hpa@zytor.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Bernhard.Rosenkranzer@linaro.org Cc: Greg Hackmann <ghackmann@google.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20170724235155.79255-1-mka@chromium.orgSigned-off-by:
-
Matthias Kaehlcke authored
BugLink: https://bugs.launchpad.net/bugs/1810958 commit d77698df upstream. For gcc stack alignment is configured with -mpreferred-stack-boundary=N, clang has the option -mstack-alignment=N for that purpose. Use the same alignment as with gcc. If the alignment is not specified clang assumes an alignment of 16 bytes, as required by the standard ABI. However as mentioned in d9b0cde9 ("x86-64, gcc: Use -mpreferred-stack-boundary=3 if supported") the standard kernel entry on x86-64 leaves the stack on an 8-byte boundary, as a consequence clang will keep the stack misaligned. Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
