In [1], we added a kconfig knob that can set
/proc/sys/kernel/unprivileged_bpf_disabled to 2

We now check against this value in bpftool feature probe

[1] https://lore.kernel.org/bpf/74ec548079189e4e4dffaeb42b8987bb3c852eee.1620765074.git.daniel@iogearbox.netSigned-off-by: Milan Landaverde <milan@mdaverde.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: KP Singh <kpsingh@kernel.org>
Link: https://lore.kernel.org/bpf/20220322145012.1315376-1-milan@mdaverde.com

Pull networking fixes from Jakub Kicinski:
 "Including fixes from netfilter.

  Current release - regressions:

   - llc: only change llc->dev when bind() succeeds, fix null-deref

  Current release - new code bugs:

   - smc: fix a memory leak in smc_sysctl_net_exit()

   - dsa: realtek: make interface drivers depend on OF

  Previous releases - regressions:

   - sched: act_ct: fix ref leak when switching zones

  Previous releases - always broken:

   - netfilter: egress: report interface as outgoing

   - vsock/virtio: enable VQs early on probe and finish the setup before
     using them

  Misc:

   - memcg: enable accounting for nft objects"

* tag 'net-5.18-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (39 commits)
  Revert "selftests: net: Add tls config dependency for tls selftests"
  net/smc: Send out the remaining data in sndbuf before close
  net: move net_unlink_todo() out of the header
  net: dsa: bcm_sf2_cfp: fix an incorrect NULL check on list iterator
  net: bnxt_ptp: fix compilation error
  selftests: net: Add tls config dependency for tls selftests
  memcg: enable accounting for nft objects
  net/sched: act_ct: fix ref leak when switching zones
  net/smc: fix a memory leak in smc_sysctl_net_exit()
  selftests: tls: skip cmsg_to_pipe tests with TLS=n
  octeontx2-af: initialize action variable
  net: sparx5: switchdev: fix possible NULL pointer dereference
  net/x25: Fix null-ptr-deref caused by x25_disconnect
  qlcnic: dcb: default to returning -EOPNOTSUPP
  net: sparx5: depends on PTP_1588_CLOCK_OPTIONAL
  net: hns3: fix phy can not link up when autoneg off and reset
  net: hns3: add NULL pointer check for hns3_set/get_ringparam()
  net: hns3: add netdev reset check for hns3_set_tunable()
  net: hns3: clean residual vf config after disable sriov
  net: hns3: add max order judgement for tx spare buffer
  ...

This reverts commit d9142e1c.

The test is supposed to run cleanly with TLS is disabled,
to test compatibility with TCP behavior. I can't repro
the failure [1], the problem should be debugged rather
than papered over.

Link: https://lore.kernel.org/all/20220325161203.7000698c@kicinski-fedora-pc1c0hjn.dhcp.thefacebook.com/ [1]
Fixes: d9142e1c ("selftests: net: Add tls config dependency for tls selftests")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20220328212904.2685395-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The current autocork algorithms will delay the data transmission
in BH context to smc_release_cb() when sock_lock is hold by user.

So there is a possibility that when connection is being actively
closed (sock_lock is hold by user now), some corked data still
remains in sndbuf, waiting to be sent by smc_release_cb(). This
will cause:

- smc_close_stream_wait(), which is called under the sock_lock,
  has a high probability of timeout because data transmission is
  delayed until sock_lock is released.

- Unexpected data sends may happen after connction closed and use
  the rtoken which has been deleted by remote peer through
  LLC_DELETE_RKEY messages.

So this patch will try to send out the remaining corked data in
sndbuf before active close process, to ensure data integrity and
avoid unexpected data transmission after close.
Reported-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Fixes: 6b88af83 ("net/smc: don't send in the BH context if sock_owned_by_user")
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Acked-by: Karsten Graul <kgraul@linux.ibm.com>
Link: https://lore.kernel.org/r/1648447836-111521-1-git-send-email-guwen@linux.alibaba.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull kgdb update from Daniel Thompson:
 "Only a single patch this cycle. Fix an obvious mistake with the kdb
  memory accessors.

  It was a stupid mistake (to/from backwards) but it has been there for
  a long time since many architectures tolerated it with surprisingly
  good grace"

* tag 'kgdb-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
  kdb: Fix the putarea helper function

Pull hexagon update from Brian Cain:
 "Maintainer email update"

* tag 'hexagon-5.18-0' of git://git.kernel.org/pub/scm/linux/kernel/git/bcain/linux:
  MAINTAINERS: update hexagon maintainer email, tree

Pull microblaze updates from Michal Simek:

 - Small fixups

 - Remove unused pci_phys_mem_access_prot()

* tag 'microblaze-v5.18' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze/PCI: Remove pci_phys_mem_access_prot() dead code
  microblaze: add const to of_device_id
  microblaze: fix typo in a comment

There's no reason for this to be in netdevice.h, it's all
just used in dev.c. Also make it no longer inline and let
the compiler decide to do that by itself.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20220325225023.f49b9056fe1c.I6b901a2df00000837a9bd251a8dd259bd23f5ded@changeidSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The bug is here:
	return rule;

The list iterator value 'rule' will *always* be set and non-NULL
by list_for_each_entry(), so it is incorrect to assume that the
iterator value will be NULL if the list is empty or no element
is found.

To fix the bug, return 'rule' when found, otherwise return NULL.

Fixes: ae7a5aff ("net: dsa: bcm_sf2: Keep copy of inserted rules")
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Link: https://lore.kernel.org/r/20220328032431.22538-1-xiam0nd.tong@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'livepatching-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching

Pull livepatching updates from Petr Mladek:

 - Forced transitions block only to-be-removed livepatches [Chengming]

 - Detect when ftrace handler could not be disabled in self-tests [David]

 - Calm down warning from a static analyzer [Tom]

* tag 'livepatching-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
  livepatch: Reorder to use before freeing a pointer
  livepatch: Don't block removal of patches that are safe to unload
  livepatch: Skip livepatch tests if ftrace cannot be configured

Pull xen updates from Juergen Gross:

 - A bunch of minor cleanups

 - A fix for kexec in Xen dom0 when executed on a high cpu number

 - A fix for resuming after suspend of a Xen guest with assigned PCI
   devices

 - A fix for a crash due to not disabled preemption when resuming as Xen
   dom0

* tag 'for-linus-5.18-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen: fix is_xen_pmu()
  xen: don't hang when resuming PCI device
  arch:x86:xen: Remove unnecessary assignment in xen_apic_read()
  xen/grant-table: remove readonly parameter from functions
  xen/grant-table: remove gnttab_*transfer*() functions
  drivers/xen: use helper macro __ATTR_RW
  x86/xen: Fix kerneldoc warning
  xen: delay xen_hvm_init_time_ops() if kdump is boot on vcpu>=32
  xen: use time_is_before_eq_jiffies() instead of open coding it

Some email infrastructure changes required this switch.
Signed-off-by: Brian Cain <bcain@quicinc.com>

The Broadcom bnxt_ptp driver does not compile with GCC 11.2.2 when
CONFIG_WERROR is enabled. The following error is generated:

drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c: In function ‘bnxt_ptp_enable’:
drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c:400:43: error: array
subscript 255 is above array bounds of ‘struct pps_pin[4]’
[-Werror=array-bounds]
  400 |  ptp->pps_info.pins[pin_id].event = BNXT_PPS_EVENT_EXTERNAL;
      |  ~~~~~~~~~~~~~~~~~~^~~~~~~~
In file included from drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c:20:
drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.h:75:24: note: while
referencing ‘pins’
   75 |         struct pps_pin pins[BNXT_MAX_TSIO_PINS];
      |                        ^~~~
cc1: all warnings being treated as errors

This is due to the function ptp_find_pin() returning a pin ID of -1 when
a valid pin is not found and this error never being checked.
Change the TSIO_PIN_VALID() function to also check that a pin ID is not
negative and use this macro in bnxt_ptp_enable() to check the result of
the calls to ptp_find_pin() to return an error early for invalid pins.
This fixes the compilation error.

Cc: <stable@vger.kernel.org>
Fixes: 9e518f25 ("bnxt_en: 1PPS functions to configure TSIO pins")
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20220328062708.207079-1-damien.lemoal@opensource.wdc.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull tty/serial driver updates from Greg KH:
 "Here are the big set of tty and serial driver changes for 5.18-rc1.

  Nothing major, some more good cleanups from Jiri and 2 new serial
  drivers. Highlights include:

   - termbits cleanups

   - export symbol cleanups and other core cleanups from Jiri Slaby

   - new sunplus and mvebu uart drivers (amazing that people are still
     creating new uarts...)

   - samsung serial driver cleanups

   - ldisc 29 is now "reserved" for experimental/development line
     disciplines

   - lots of other tiny fixes and cleanups to serial drivers and
     bindings

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (104 commits)
  vt_ioctl: fix potential spectre v1 in VT_DISALLOCATE
  serial: 8250: fix XOFF/XON sending when DMA is used
  tty: serial: samsung: Add ARTPEC-8 support
  dt-bindings: serial: samsung: Add ARTPEC-8 UART
  serial: sc16is7xx: Clear RS485 bits in the shutdown
  tty: serial: samsung: simplify getting OF match data
  tty: serial: samsung: constify variables and pointers
  tty: serial: samsung: constify s3c24xx_serial_drv_data members
  tty: serial: samsung: constify UART name
  tty: serial: samsung: constify s3c24xx_serial_drv_data
  tty: serial: samsung: reduce number of casts
  tty: serial: samsung: embed s3c2410_uartcfg in parent structure
  tty: serial: samsung: embed s3c24xx_uart_info in parent structure
  serial: 8250_tegra: mark acpi_device_id as unused with !ACPI
  tty: serial: bcm63xx: use more precise Kconfig symbol
  serial: SERIAL_SUNPLUS should depend on ARCH_SUNPLUS
  tty: serial: jsm: fix two assignments in if conditions
  tty: serial: jsm: remove redundant assignments to variable linestatus
  serial: 8250_mtk: make two read-only arrays static const
  serial: samsung_tty: do not unlock port->lock for uart_write_wakeup()
  ...

Pull staging driver updates from Greg KH:
 "Here is the big set of staging driver updates for 5.18-rc1.

  Loads of tiny cleanups for almost all staging drivers in here, nothing
  major at all. Highlights include:

   - remove the ashmem Android driver. It is long-dead and if there are
     any legacy userspace applications still using it, the Android
     kernel images will maintain it, the community shouldn't care about
     it anymore

   - wfx wifi driver major cleanups. Should be ready to merge out of
     staging soon, and will coordinate with the wifi maintainers after
     -rc1 is out

   - major cleanups and unwinding of the layers of the r8188eu driver.
     It's amazing just how many unneeded layers of abstraction is in
     there, just when we think it's done, another is found...

   - lots of tiny coding style cleanups in many other staging drivers.

  All have been in linux-next for a while with no reported problems"

* tag 'staging-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (455 commits)
  staging: r8188eu: remove unnecessary memset in r8188eu
  staging: greybus: introduce pwm_ops::apply
  staging: rts5208: Resolve checkpatch.pl issues.
  staging: sm750fb: fix naming style
  staging: fbtft: Consider type of init sequence values in fbtft_init_display()
  staging: fbtft: Constify buf parameter in fbtft_dbg_hex()
  staging: mmal-vchiq: clear redundant item named bulk_scratch
  mips: dts: ralink: add MT7621 SoC
  staging: r8188eu: remove some unused local ieee80211 macros
  staging: r8188eu: make rtl8188e_process_phy_info static
  staging: r8188eu: remove unused function prototype
  staging: r8188eu: remove three unused receive defines
  staging: r8188eu: remove unnecessary initializations
  staging: rtl8192e: Fix spelling mistake "RESQUEST" -> "REQUEST"
  MAINTAINERS: remove the obsolete file entry for staging in ANDROID DRIVERS
  staging: r8188eu: proper error handling in rtw_init_drv_sw
  staging: r8188eu: call _cancel_timer_ex from _rtw_free_recv_priv
  staging: vt6656: Removed unused variable vt3342_vnt_threshold
  staging: vt6656: Removed unused variable bb_vga_0
  staging: remove ashmem
  ...

Merge tag 'driver-core-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here is the set of driver core changes for 5.18-rc1.

  Not much here, primarily it was a bunch of cleanups and small updates:

   - kobj_type cleanups for default_groups

   - documentation updates

   - firmware loader minor changes

   - component common helper added and take advantage of it in many
     drivers (the largest part of this pull request).

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'driver-core-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (54 commits)
  Documentation: update stable review cycle documentation
  drivers/base/dd.c : Remove the initial value of the global variable
  Documentation: update stable tree link
  Documentation: add link to stable release candidate tree
  devres: fix typos in comments
  Documentation: add note block surrounding security patch note
  samples/kobject: Use sysfs_emit instead of sprintf
  base: soc: Make soc_device_match() simpler and easier to read
  driver core: dd: fix return value of __setup handler
  driver core: Refactor sysfs and drv/bus remove hooks
  driver core: Refactor multiple copies of device cleanup
  scripts: get_abi.pl: Fix typo in help message
  kernfs: fix typos in comments
  kernfs: remove unneeded #if 0 guard
  ALSA: hda/realtek: Make use of the helper component_compare_dev_name
  video: omapfb: dss: Make use of the helper component_compare_dev
  power: supply: ab8500: Make use of the helper component_compare_dev
  ASoC: codecs: wcd938x: Make use of the helper component_compare/release_of
  iommu/mediatek: Make use of the helper component_compare/release_of
  drm: of: Make use of the helper component_release_of
  ...

Pull char/misc and other driver updates from Greg KH:
 "Here is the big set of char/misc and other small driver subsystem
  updates for 5.18-rc1.

  Included in here are merges from driver subsystems which contain:

   - iio driver updates and new drivers

   - fsi driver updates

   - fpga driver updates

   - habanalabs driver updates and support for new hardware

   - soundwire driver updates and new drivers

   - phy driver updates and new drivers

   - coresight driver updates

   - icc driver updates

  Individual changes include:

   - mei driver updates

   - interconnect driver updates

   - new PECI driver subsystem added

   - vmci driver updates

   - lots of tiny misc/char driver updates

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (556 commits)
  firmware: google: Properly state IOMEM dependency
  kgdbts: fix return value of __setup handler
  firmware: sysfb: fix platform-device leak in error path
  firmware: stratix10-svc: add missing callback parameter on RSU
  arm64: dts: qcom: add non-secure domain property to fastrpc nodes
  misc: fastrpc: Add dma handle implementation
  misc: fastrpc: Add fdlist implementation
  misc: fastrpc: Add helper function to get list and page
  misc: fastrpc: Add support to secure memory map
  dt-bindings: misc: add fastrpc domain vmid property
  misc: fastrpc: check before loading process to the DSP
  misc: fastrpc: add secure domain support
  dt-bindings: misc: add property to support non-secure DSP
  misc: fastrpc: Add support to get DSP capabilities
  misc: fastrpc: add support for FASTRPC_IOCTL_MEM_MAP/UNMAP
  misc: fastrpc: separate fastrpc device from channel context
  dt-bindings: nvmem: brcm,nvram: add basic NVMEM cells
  dt-bindings: nvmem: make "reg" property optional
  nvmem: brcm_nvram: parse NVRAM content into NVMEM cells
  nvmem: dt-bindings: Fix the error of dt-bindings check
  ...

Pull pin control updates from Linus Walleij:
 "No core changes this time. Just new driver code and improvements!

  New drivers:

   - New driver for the Broadcom BCM4908 SoC.

   - New subdriver for Tesla FSD (Full Self Driving) SoC, a derivative
     of the Samsung Exynos pin control driver.

   - New driver for the Amlogic Meson S4 SoC.

   - New driver for the Sunplus SP7021 SoC.

   - New driver for the Microsemi Ocelot family ServalT SoC.

   - New subdriver for Intel Alder Lake-M SoC.

   - New subdriver for Intel Ice Lake-N SoC, including PCH support.

   - New subdriver for Renesas R8A779F0 SoC.

   - New subdriver for Mediatek MT8186 SoC.

   - New subdriver for NXP Freescale i.MX93 SoC.

   - New driver for Nuvoton WPCM450 SoC.

   - New driver for Qualcomm SC8280XP SoC.

  Improvements:

   - Wakeup support on Samsung Exynos850 and ExynosAutov9.

   - Serious and voluminous maintenance cleanup and refactoring in the
     Renesas drivers. Mainly sharing similar data between the different
     SoC subdrivers.

   - Qualcomm SM8450 EGPIO support.

   - Drive strength support on the Mediatek MT8195.

   - Add some missing groups and functions to the Ralink RT2880"

* tag 'pinctrl-v5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (188 commits)
  pinctrl: mediatek: common-v1: fix semicolon.cocci warnings
  pinctrl: nuvoton: wpcm450: Fix build error without OF
  pinctrl: qcom-pmic-gpio: Add support for pm8450
  dt-bindings: pinctrl: aspeed: Update gfx node in example
  dt-bindings: pinctrl: rt2880: add missing pin groups and functions
  pinctrl: ingenic: Fix regmap on X series SoCs
  pinctrl: nuvoton: Fix return value check in wpcm450_gpio_register()
  pinctrl: nuvoton: wpcm450: off by one in wpcm450_gpio_register()
  pinctrl: nuvoton: wpcm450: select GENERIC_PINCTRL_GROUPS
  pinctrl: nuvoton: Fix sparse warning
  pinctrl: mediatek: mt8186: Account for probe refactoring
  pinctrl: mediatek: common-v1: Commonize spec_ies_smt_set callback
  pinctrl: mediatek: common-v1: Commonize spec_pupd callback
  pinctrl: mediatek: common-v1: Use common probe function
  pinctrl: mediatek: common-v1: Add common probe function
  pinctrl: mediatek: paris: Unify probe function by using OF match data
  pinctrl/rockchip: Add missing of_node_put() in rockchip_pinctrl_probe
  pinctrl: nomadik: Add missing of_node_put() in nmk_pinctrl_probe
  pinctrl: berlin: fix error return code of berlin_pinctrl_build_state()
  pinctrl: qcom: Introduce sc8280xp TLMM driver
  ...

Halil Pasic points out [1] that the full revert of that commit (revert
in bddac7c1), and that a partial revert that only reverts the
problematic case, but still keeps some of the cleanups is probably
better.  

And that partial revert [2] had already been verified by Oleksandr
Natalenko to also fix the issue, I had just missed that in the long
discussion.

So let's reinstate the cleanups from commit aa6f8dcb ("swiotlb:
rework "fix info leak with DMA_FROM_DEVICE""), and effectively only
revert the part that caused problems.

Link: https://lore.kernel.org/all/20220328013731.017ae3e3.pasic@linux.ibm.com/ [1]
Link: https://lore.kernel.org/all/20220324055732.GB12078@lst.de/ [2]
Link: https://lore.kernel.org/all/4386660.LvFx2qVVIh@natalenko.name/ [3]
Suggested-by: Halil Pasic <pasic@linux.ibm.com>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Cc: Christoph Hellwig" <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

selftest net tls test cases need TLS=m without this the test hangs.
Enabling config TLS solves this problem and runs to complete.
  - CONFIG_TLS=m
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

1) Incorrect output device in nf_egress hook, from Phill Sutter.

2) Preserve liberal flag in TCP conntrack state, reported by Sven Auhagen.

3) Use GFP_KERNEL_ACCOUNT flag for nf_tables objects, from Vasily Averin.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

nftables replaces iptables, but it lacks memcg accounting.

This patch account most of the memory allocation associated with nft
and should protect the host from misusing nft inside a memcg restricted
container.
Signed-off-by: Vasily Averin <vvs@openvz.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

The objcg is not cleared and put for kfence object when it is freed,
which could lead to memory leak for struct obj_cgroup and wrong
statistics of NR_SLAB_RECLAIMABLE_B or NR_SLAB_UNRECLAIMABLE_B.

Since the last freed object's objcg is not cleared,
mem_cgroup_from_obj() could return the wrong memcg when this kfence
object, which is not charged to any objcgs, is reallocated to other
users.

A real word issue [1] is caused by this bug.

Link: https://lore.kernel.org/all/000000000000cabcb505dae9e577@google.com/ [1]
Reported-by: syzbot+f8c45ccc7d5d45fc5965@syzkaller.appspotmail.com
Fixes: d3fb45f3 ("mm, kfence: insert KFENCE hooks for SLAB")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fixes: 70010521 ("Merge tag 'x86_core_for_5.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip")
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Brown-paper-bag-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull landlock updates from Mickaël Salaün:
 "These two commits contain a minor fix for the sandboxer sample, and a
  Landlock ruleset FD name standardization"

* tag 'landlock-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
  landlock: Use square brackets around "landlock-ruleset"
  samples/landlock: Fix path_list memory leak

Pull mailbox updates from Jassi Brar:
 "qcom:
   - add support for MSM8976

  mtk:
   - enable mt8186
   - add ADSP controller driver

  ti:
   - use poll mode during suspend

  tegra:
   - fix tx channel flush

  imx:
   - add i.MX8 SECO MU support
   - prepare for, and add iMX93 support"

* tag 'mailbox-v5.18' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
  dt-bindings: mailbox: add definition for mt8186
  mailbox: ti-msgmgr: Operate mailbox in polled mode during system suspend
  mailbox: ti-msgmgr: Refactor message read during interrupt handler
  mailbox: imx: support i.MX93 S401 MU
  mailbox: imx: support dual interrupts
  mailbox: imx: extend irq to an array
  dt-bindings: mailbox: imx-mu: add i.MX93 S4 MU support
  dt-bindings: mailbox: imx-mu: add i.MX93 MU
  mailbox: imx: add i.MX8 SECO MU support
  mailbox: imx: introduce rxdb callback
  dt-bindings: mailbox: imx-mu: add i.MX8 SECO MU support
  mailbox: imx: enlarge timeout while reading/writing messages to SCFW
  mailbox: imx: fix crash in resume on i.mx8ulp
  mailbox: imx: fix wakeup failure from freeze mode
  mailbox: mediatek: add support for adsp mailbox controller
  dt-bindings: mailbox: mtk,adsp-mbox: add mtk adsp-mbox document
  mailbox: qcom-apcs-ipc: Add compatible for MSM8976 SoC
  dt-bindings: mailbox: Add compatible for the MSM8976
  mailbox: tegra-hsp: Flush whole channel

Pull LED updates from Pavel Machek:
 "Nothing major here, there are two drivers that need review and did not
  make it into this round"

* tag 'leds-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds:
  leds: pca955x: Allow zero LEDs to be specified
  leds: pca955x: Make the gpiochip always expose all pins
  leds: simatic-ipc-leds: Don't directly deref ioremap_resource() returned ptr
  leds: simatic-ipc-leds: Make simatic_ipc_led_mem_res static
  leds: lm3692x: Return 0 from remove callback
  leds: sgm3140: Add ocs,ocp8110 compatible
  dt-bindings: vendor-prefixes: Add ocs prefix
  dt-bindings: leds: common: fix unit address in max77693 example

Merge tag 'perf-tools-for-v5.18-2022-03-26' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools updates from Arnaldo Carvalho de Melo:
 "New features:

  perf ftrace:

   - Add -n/--use-nsec option to the 'latency' subcommand.

     Default: usecs:

     $ sudo perf ftrace latency -T dput -a sleep 1
     #   DURATION     |      COUNT | GRAPH                          |
          0 - 1    us |    2098375 | #############################  |
          1 - 2    us |         61 |                                |
          2 - 4    us |         33 |                                |
          4 - 8    us |         13 |                                |
          8 - 16   us |        124 |                                |
         16 - 32   us |        123 |                                |
         32 - 64   us |          1 |                                |
         64 - 128  us |          0 |                                |
        128 - 256  us |          1 |                                |
        256 - 512  us |          0 |                                |

     Better granularity with nsec:

     $ sudo perf ftrace latency -T dput -a -n sleep 1
     #   DURATION     |      COUNT | GRAPH                          |
          0 - 1    us |          0 |                                |
          1 - 2    ns |          0 |                                |
          2 - 4    ns |          0 |                                |
          4 - 8    ns |          0 |                                |
          8 - 16   ns |          0 |                                |
         16 - 32   ns |          0 |                                |
         32 - 64   ns |          0 |                                |
         64 - 128  ns |    1163434 | ##############                 |
        128 - 256  ns |     914102 | #############                  |
        256 - 512  ns |        884 |                                |
        512 - 1024 ns |        613 |                                |
          1 - 2    us |         31 |                                |
          2 - 4    us |         17 |                                |
          4 - 8    us |          7 |                                |
          8 - 16   us |        123 |                                |
         16 - 32   us |         83 |                                |

  perf lock:

   - Add -c/--combine-locks option to merge lock instances in the same
     class into a single entry.

     # perf lock report -c
                    Name acquired contended avg wait(ns) total wait(ns) max wait(ns) min wait(ns)

           rcu_read_lock   251225         0            0              0            0            0
      hrtimer_bases.lock    39450         0            0              0            0            0
     &sb->s_type->i_l...    10301         1          662            662          662          662
        ptlock_ptr(page)    10173         2          701           1402          760          642
     &(ei->i_block_re...     8732         0            0              0            0            0
            &xa->xa_lock     8088         0            0              0            0            0
             &base->lock     6705         0            0              0            0            0
             &p->pi_lock     5549         0            0              0            0            0
     &dentry->d_lockr...     5010         4         1274           5097         1844          789
               &ep->lock     3958         0            0              0            0            0

      - Add -F/--field option to customize the list of fields to output:

     $ perf lock report -F contended,wait_max -k avg_wait
                     Name contended max wait(ns) avg wait(ns)

           slock-AF_INET6         1        23543        23543
        &lruvec->lru_lock         5        18317        11254
           slock-AF_INET6         1        10379        10379
               rcu_node_1         1         2104         2104
      &dentry->d_lockr...         1         1844         1844
      &dentry->d_lockr...         1         1672         1672
         &newf->file_lock        15         2279         1025
      &dentry->d_lockr...         1          792          792

   - Add --synth=no option for record, as there is no need to symbolize,
     lock names comes from the tracepoints.

  perf record:

   - Threaded recording, opt-in, via the new --threads command line
     option.

   - Improve AMD IBS (Instruction-Based Sampling) error handling
     messages.

  perf script:

   - Add 'brstackinsnlen' field (use it with -F) for branch stacks.

   - Output branch sample type in 'perf script'.

  perf report:

   - Add "addr_from" and "addr_to" sort dimensions.

   - Print branch stack entry type in 'perf report --dump-raw-trace'

   - Fix symbolization for chrooted workloads.

  Hardware tracing:

  Intel PT:

   - Add CFE (Control Flow Event) and EVD (Event Data) packets support.

   - Add MODE.Exec IFLAG bit support.

     Explanation about these features from the "Intel® 64 and IA-32
     architectures software developer’s manual combined volumes: 1, 2A,
     2B, 2C, 2D, 3A, 3B, 3C, 3D, and 4" PDF at:

        https://cdrdv2.intel.com/v1/dl/getContent/671200

     At page 3951:
      "32.2.4

       Event Trace is a capability that exposes details about the
       asynchronous events, when they are generated, and when their
       corresponding software event handler completes execution. These
       include:

        o Interrupts, including NMI and SMI, including the interrupt
          vector when defined.

        o Faults, exceptions including the fault vector.

           - Page faults additionally include the page fault address,
             when in context.

        o Event handler returns, including IRET and RSM.

        o VM exits and VM entries.¹

           - VM exits include the values written to the “exit reason”
             and “exit qualification” VMCS fields. INIT and SIPI events.

        o TSX aborts, including the abort status returned for the RTM
          instructions.

        o Shutdown.

       Additionally, it provides indication of the status of the
       Interrupt Flag (IF), to indicate when interrupts are masked"

  ARM CoreSight:

   - Use advertised caps/min_interval as default sample_period on ARM
     spe.

   - Update deduction of TRCCONFIGR register for branch broadcast on
     ARM's CoreSight ETM.

  Vendor Events (JSON):

  Intel:

   - Update events and metrics for: Alderlake, Broadwell, Broadwell DE,
     BroadwellX, CascadelakeX, Elkhartlake, Bonnell, Goldmont,
     GoldmontPlus, Westmere EP-DP, Haswell, HaswellX, Icelake, IcelakeX,
     Ivybridge, Ivytown, Jaketown, Knights Landing, Nehalem EP,
     Sandybridge, Silvermont, Skylake, Skylake Server, SkylakeX,
     Tigerlake, TremontX, Westmere EP-SP, and Westmere EX.

  ARM:

   - Add support for HiSilicon CPA PMU aliasing.

  perf stat:

   - Fix forked applications enablement of counters.

   - The 'slots' should only be printed on a different order than the
     one specified on the command line when 'topdown' events are
     present, fix it.

  Miscellaneous:

   - Sync msr-index, cpufeatures header files with the kernel sources.

   - Stop using some deprecated libbpf APIs in 'perf trace'.

   - Fix some spelling mistakes.

   - Refactor the maps pointers usage to pave the way for using refcount
     debugging.

   - Only offer the --tui option on perf top, report and annotate when
     perf was built with libslang.

   - Don't mention --to-ctf in 'perf data --help' when not linking with
     the required library, libbabeltrace.

   - Use ARRAY_SIZE() instead of ad hoc equivalent, spotted by
     array_size.cocci.

   - Enhance the matching of sub-commands abbreviations:
	'perf c2c rec' -> 'perf c2c record'
	'perf c2c recport -> error

   - Set build-id using build-id header on new mmap records.

   - Fix generation of 'perf --version' string.

  perf test:

   - Add test for the arm_spe event.

   - Add test to check unwinding using fame-pointer (fp) mode on arm64.

   - Make metric testing more robust in 'perf test'.

   - Add error message for unsupported branch stack cases.

  libperf:

   - Add API for allocating new thread map array.

   - Fix typo in perf_evlist__open() failure error messages in libperf
     tests.

  perf c2c:

   - Replace bitmap_weight() with bitmap_empty() where appropriate"

* tag 'perf-tools-for-v5.18-2022-03-26' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (143 commits)
  perf evsel: Improve AMD IBS (Instruction-Based Sampling) error handling messages
  perf python: Add perf_env stubs that will be needed in evsel__open_strerror()
  perf tools: Enhance the matching of sub-commands abbreviations
  libperf tests: Fix typo in perf_evlist__open() failure error messages
  tools arm64: Import cputype.h
  perf lock: Add -F/--field option to control output
  perf lock: Extend struct lock_key to have print function
  perf lock: Add --synth=no option for record
  tools headers cpufeatures: Sync with the kernel sources
  tools headers cpufeatures: Sync with the kernel sources
  perf stat: Fix forked applications enablement of counters
  tools arch x86: Sync the msr-index.h copy with the kernel sources
  perf evsel: Make evsel__env() always return a valid env
  perf build-id: Fix spelling mistake "Cant" -> "Can't"
  perf header: Fix spelling mistake "could't" -> "couldn't"
  perf script: Add 'brstackinsnlen' for branch stacks
  perf parse-events: Move slots only with topdown
  perf ftrace latency: Update documentation
  perf ftrace latency: Add -n/--use-nsec option
  perf tools: Fix version kernel tag
  ...

Pull memblock updates from Mike Rapoport:
 "Test suite and a small cleanup:

   - A small cleanup of unused variable in __next_mem_pfn_range_in_zone

   - Initial test suite to simulate memblock behaviour in userspace"

* tag 'memblock-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock: (27 commits)
  memblock tests: Add TODO and README files
  memblock tests: Add memblock_alloc_try_nid tests for bottom up
  memblock tests: Add memblock_alloc_try_nid tests for top down
  memblock tests: Add memblock_alloc_from tests for bottom up
  memblock tests: Add memblock_alloc_from tests for top down
  memblock tests: Add memblock_alloc tests for bottom up
  memblock tests: Add memblock_alloc tests for top down
  memblock tests: Add simulation of physical memory
  memblock tests: Split up reset_memblock function
  memblock tests: Fix testing with 32-bit physical addresses
  memblock: __next_mem_pfn_range_in_zone: remove unneeded local variable nid
  memblock tests: Add memblock_free tests
  memblock tests: Add memblock_add_node test
  memblock tests: Add memblock_remove tests
  memblock tests: Add memblock_reserve tests
  memblock tests: Add memblock_add tests
  memblock tests: Add memblock reset function
  memblock tests: Add skeleton of the memblock simulator
  tools/include: Add debugfs.h stub
  tools/include: Add pfn.h stub
  ...

Pull OpenRISC updates from Stafford Horne:
 "Not much for OpenRISC this merge window, I do have some things on the
  back burner like sparse warning cleanups and new defconfigs. But I
  didn't get time to polish the patches off for this round. There are
  OpenRISC updates coming in via other queues like removal of set_fs()
  and possibly new generic ticket locks.

  This just has a small fixup to remove duplicate initializer in memcpy
  from Kuniyuki Iwashima"

* tag 'for-linus' of https://github.com/openrisc/linux:
  openrisc/boot: Remove unnecessary initialisation in memcpy().

Pull x86 CET-IBT (Control-Flow-Integrity) support from Peter Zijlstra:
 "Add support for Intel CET-IBT, available since Tigerlake (11th gen),
  which is a coarse grained, hardware based, forward edge
  Control-Flow-Integrity mechanism where any indirect CALL/JMP must
  target an ENDBR instruction or suffer #CP.

  Additionally, since Alderlake (12th gen)/Sapphire-Rapids, speculation
  is limited to 2 instructions (and typically fewer) on branch targets
  not starting with ENDBR. CET-IBT also limits speculation of the next
  sequential instruction after the indirect CALL/JMP [1].

  CET-IBT is fundamentally incompatible with retpolines, but provides,
  as described above, speculation limits itself"

[1] https://www.intel.com/content/www/us/en/developer/articles/technical/software-security-guidance/technical-documentation/branch-history-injection.html

* tag 'x86_core_for_5.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits)
  kvm/emulate: Fix SETcc emulation for ENDBR
  x86/Kconfig: Only allow CONFIG_X86_KERNEL_IBT with ld.lld >= 14.0.0
  x86/Kconfig: Only enable CONFIG_CC_HAS_IBT for clang >= 14.0.0
  kbuild: Fixup the IBT kbuild changes
  x86/Kconfig: Do not allow CONFIG_X86_X32_ABI=y with llvm-objcopy
  x86: Remove toolchain check for X32 ABI capability
  x86/alternative: Use .ibt_endbr_seal to seal indirect calls
  objtool: Find unused ENDBR instructions
  objtool: Validate IBT assumptions
  objtool: Add IBT/ENDBR decoding
  objtool: Read the NOENDBR annotation
  x86: Annotate idtentry_df()
  x86,objtool: Move the ASM_REACHABLE annotation to objtool.h
  x86: Annotate call_on_stack()
  objtool: Rework ASM_REACHABLE
  x86: Mark __invalid_creds() __noreturn
  exit: Mark do_group_exit() __noreturn
  x86: Mark stop_this_cpu() __noreturn
  objtool: Ignore extra-symbol code
  objtool: Rename --duplicate to --lto
  ...

drivers/pinctrl/mediatek/pinctrl-mtk-common.c:171:2-3: Unneeded semicolon

 Remove unneeded semicolon.

Generated by: scripts/coccinelle/misc/semicolon.cocci

Fixes: 156f7217 ("pinctrl: mediatek: common-v1: Commonize spec_ies_smt_set callback")
CC: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20220322130308.GA21877@65fc916127a5Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

When switching zones or network namespaces without doing a ct clear in
between, it is now leaking a reference to the old ct entry. That's
because tcf_ct_skb_nfct_cached() returns false and
tcf_ct_flow_table_lookup() may simply overwrite it.

The fix is to, as the ct entry is not reusable, free it already at
tcf_ct_skb_nfct_cached().
Reported-by: Florian Westphal <fw@strlen.de>
Fixes: 2f131de3 ("net/sched: act_ct: Fix flow table lookup after ct clear or switching zones")
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull trace event string verifier fix from Steven Rostedt:
 "The run-time string verifier checks all trace event formats as
  they are read from the tracing file to make sure that the %s pointers
  are not reading something that no longer exists.

  However, it failed to account for the valid case of '%*.s' where the
  length given is zero, and the string is NULL. It incorrectly flagged
  it as a null pointer dereference and gave a WARN_ON()"

* tag 'trace-v5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Have trace event string test handle zero length strings

Recently added smc_sysctl_net_exit() forgot to free
the memory allocated from smc_sysctl_net_init()
for non initial network namespace.

Fixes: 462791bb ("net/smc: add sysctl interface for SMC")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Tony Lu <tonylu@linux.alibaba.com>
Cc: Dust Li <dust.li@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

These are negative tests, testing TLS code rejects certain
operations. They won't pass without TLS enabled, pure TCP
accepts those operations.
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Fixes: d87d67fd ("selftests: tls: test splicing cmsgs")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Clang static analysis reports this representative issue
rvu_npc.c:898:15: warning: Assigned value is garbage
  or undefined
  req.match_id = action.match_id;
               ^ ~~~~~~~~~~~~~~~

The initial setting of action is conditional on
 if (is_mcam_entry_enabled(...))
The later check of action.op will sometimes be garbage.
So initialize action.

Reduce setting of
  *(u64 *)&action = 0x00;
to
  *(u64 *)&action = 0;

Fixes: 967db352 ("octeontx2-af: add support for multicast/promisc packet replication feature")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull USB/Thunderbolt updates from Greg KH:
 "Here is the big set of USB and Thunderbolt changes for 5.18-rc1.

  Nothing major in here, just lots of little improvements and cleanups
  and new device support. Highlights are:

   - list iterator fixups for when we walk past the end of the list (a
     common problem that was cut/pasted in almost all USB gadget
     drivers)

   - xen USB driver "hardening" for malicious hosts

   - xhci driver updates and fixes for more hardware types

   - xhci debug cable fixes to make it actually work again

   - usb gadget audio driver improvements

   - usb gadget storage fixes to work with OS-X

   - lots of other small usb gadget fixes and updates

   - USB DWC3 driver improvements for more hardware types

   - Lots of other small USB driver improvements

   - DTS updates for some USB platforms

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (172 commits)
  usb: gadget: fsl_qe_udc: Add missing semicolon in qe_ep_dequeue()
  dt-bindings: usb: mtk-xhci: add compatible for mt8186
  usb: dwc3: Issue core soft reset before enabling run/stop
  usb: gadget: Makefile: remove ccflags-y
  USB: usb-storage: Fix use of bitfields for hardware data in ene_ub6250.c
  usb: gadget: eliminate anonymous module_init & module_exit
  usb: usbip: eliminate anonymous module_init & module_exit
  xen/usb: harden xen_hcd against malicious backends
  usb: dwc3: gadget: Wait for ep0 xfers to complete during dequeue
  usb: dwc3: gadget: move cmd_endtransfer to extra function
  usb: dwc3: gadget: ep_queue simplify isoc start condition
  xen/usb: don't use arbitrary_virt_to_machine()
  usb: isp1760: remove redundant max_packet() macro
  usb: oxu210hp-hcd: remove redundant call to max_packet() macro
  usb: common: usb-conn-gpio: Make VBUS supply completely optional
  USB: storage: ums-realtek: fix error code in rts51x_read_mem()
  usb: early: xhci-dbc: Fix xdbc number parsing
  usb: early: xhci-dbc: Remove duplicate keep parsing
  x86/tsc: Be consistent about use_tsc_delay()
  usb: gadget: udc: s3c2410: remove usage of list iterator past the loop body
  ...

Pull i2c updates from Wolfram Sang:

 - tracepoints when Linux acts as an I2C client

 - added support for AMD PSP

 - whole subsystem now uses generic_handle_irq_safe()

 - piix4 driver gained MMIO access enabling so far missed controllers
   with AMD chipsets

 - a bulk of device driver updates, refactorization, and fixes.

* 'i2c/for-mergewindow' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (61 commits)
  i2c: mux: demux-pinctrl: do not deactivate a master that is not active
  i2c: meson: Fix wrong speed use from probe
  i2c: add tracepoints for I2C slave events
  i2c: designware: Remove code duplication
  i2c: cros-ec-tunnel: Fix syntax errors in comments
  MAINTAINERS: adjust XLP9XX I2C DRIVER after removing the devicetree binding
  i2c: designware: Mark dw_i2c_plat_{suspend,resume}() as __maybe_unused
  i2c: mediatek: Add i2c compatible for Mediatek MT8168
  dt-bindings: i2c: update bindings for MT8168 SoC
  i2c: mt65xx: Simplify with clk-bulk
  i2c: i801: Drop two outdated comments
  i2c: xiic: Make bus names unique
  i2c: i801: Add support for the Process Call command
  i2c: i801: Drop useless masking in i801_access
  i2c: tegra: Add SMBus block read function
  i2c: designware: Use the i2c_mark_adapter_suspended/resumed() helpers
  i2c: designware: Lock the adapter while setting the suspended flag
  i2c: mediatek: remove redundant null check
  i2c: mediatek: modify bus speed calculation formula
  i2c: designware: Fix improper usage of readl
  ...