This patch introduces a sysfs group entry for the UFS interconnect
descriptor parameters. The group adds "interconnect_descriptor" folder
under the UFS driver sysfs entry (/sys/bus/platform/drivers/ufshcd/*).
The parameters are shown as hexadecimal numbers. The full information
about the parameters could be found at UFS specifications 2.1.
Signed-off-by: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

This patch introduces a sysfs group entry for the UFS device descriptor
parameters. The group adds "device_descriptor" folder under the UFS driver
sysfs entry (/sys/bus/platform/drivers/ufshcd/*). The parameters are shown
as hexadecimal numbers. The full information about the parameters could be
found at UFS specifications 2.1.
Signed-off-by: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

This patch introduces attribute group to show existing sysfs entries.
Signed-off-by: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Error injection in scsi_debug (e.g. opts=16, SDEBUG_OPT_TRANSPORT_ERR)
currently doesn't work correctly because the test for sqcp in
resp_read_dt0() and similar resp_*() functions always fails.  sqcp is
set from cmnd->host_scribble, which is set in schedule_resp(), which is
called from scsi_debug_queuecommand() after calling the resp_* function.

Defer calling resp_*() until after cmnd->host_scribble is set in
schedule_resp().

Fixes: c4837394 "scsi_debug: add multiple queue support"
Signed-off-by: Martin Wilck <mwilck@suse.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Don't populate the const read-only arrays spi_test_unit_ready and
spi_test_unit_ready on the stack but instead make them static. Makes the
object code smaller by over 100 bytes:

Before:
   text	   data	    bss	    dec	    hex	filename
  40171	  12832	    128	  53131	   cf8b	drivers/scsi/scsi_transport_spi.o

After:
   text	   data	    bss	    dec	    hex	filename
  39922	  12976	    128	  53026	   cf22	drivers/scsi/scsi_transport_spi.o

(gcc version 7.2.0 x86_64)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

If every_nth > 0, the injection flags must be reset for commands that
aren't supposed to fail (i.e. that aren't "nth"). Otherwise, commands
will continue to fail, like in the every_nth < 0 case.
Signed-off-by: Martin Wilck <mwilck@suse.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

The Start Stop Unit (SSU) command takes in the order of a second to complete
on some SAS SSDs and longer on hard disks. Synchronize Cache (SC) can also
take some time. Both commands have an IMMED bit in their cdbs for those apps
that don't want to wait. This patch introduces a long delay for those commands
when the IMMED bit is clear.  Since SC is a media access command then when the
fake_rw option is active, its cdb processing is skipped and it returns
immediately. The SSU command is not altered by the setting of the fake_rw
option. These actions are not changed by this patch.

Changes since v1:
  - clear the cdb mask of SYNCHRONIZE CACHE(16) cdb in byte 1, bit 0

Changes:
  - add the SYNCHRONIZE CACHE(16) command
  - together with the existing START STOP UNIT and SYNCHRONIZE CACHE(10)
    commands process the IMMED bit in their cdbs
  - if the IMMED bit is set, return immediately
  - if the IMMED bit is clear, treat the delay parameter as having
    a unit of one second
  - in the SYNCHRONIZE CACHE processing do a bounds check
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Pointer styling issues exposed by checkpatch.pl in scsi_debug.c:

   ERROR: "foo * bar" should be "foo *bar"

Fixed 37 total errors reported.

[mkp: fixed typo noticed by Doug]
Signed-off-by: John Pittman <jpittman@redhat.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Make scsi_test_unit_ready() send at most as many TURs as specified in
the 'retries' argument instead of retries * (retries + 1) / 2.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

The eh_deadline definition occurs in the middle of the code for
releasing a host. Avoid splitting the host release code by moving the
definition of the eh_deadline parameter to the top of the hosts.c source
file.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

After the patch that introduced this function was posted on the
linux-scsi mailing list an explanation was posted why this patch is
correct. Since that explanation contains important information, add a
summary of it above the code that explanation applies to.  See also
http://www.spinics.net/lists/linux-scsi/msg106326.html.

References: e494f6a7 ("[SCSI] improved eh timeout handler")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Use the sgl_alloc_order() and sgl_free_order() functions instead of open
coding these functions.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Cc: Anil Ravindranath <anil_ravindranath@pmc-sierra.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Cc: Anil Ravindranath <anil_ravindranath@pmc-sierra.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Use the sgl_alloc_order() and sgl_free_order() functions instead of open
coding these functions.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Acked-by: Brian King <brking@linux.vnet.ibm.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

There are several occurrances where pointer ioadl is initialized with a
value that is never read and where it is re-assigned a new value later
on, hence the initialization is redundant and can be removed.

Cleans up clang warnings:
drivers/scsi/pmcraid.c:1028:29: warning: Value stored to 'ioadl' during
its initialization is never read
drivers/scsi/pmcraid.c:3178:29: warning: Value stored to 'ioadl' during
its initialization is never read
drivers/scsi/pmcraid.c:5495:29: warning: Value stored to 'ioadl' during
its initialization is never read
drivers/scsi/pmcraid.c:5668:29: warning: Value stored to 'ioadl' during
its initialization is never read
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Variable bit is initialized with a value that is never read and is being
updated immediately after the initialization, hence the initialization
is redundant and can be removed.

Cleans up clang warning:
drivers/scsi/isci/host.c:2769:8: warning: Value stored to 'bit' during
its initialization is never read
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Building with link time optimizations produces a false-positive section
mismatch warning:

WARNING: vmlinux.o(.data+0xf8c8): Section mismatch in reference from the variable driver_template.lto_priv.6915 to the function .init.text:sym53c416_detect()
The variable driver_template.lto_priv.6915 references
the function __init sym53c416_detect()
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the variable:
*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console

The ->detect callback is always entered from the init_this_scsi_driver()
init function, but apparently LTO turns the optimized direct function
call into an indirect call through a non-__initdata pointer.

All drivers using init_this_scsi_driver() are for ancient hardware,
and most don't mark the detect() callback as __init(), so I'm
just removing the annotation here to kill off the warning instead
of doing a larger rework.

[mkp: typo]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Building with link time optimizations produces a false-positive section
mismatch warning:

WARNING: vmlinux.o(.data+0xf7e8): Section mismatch in reference from the variable driver_template.lto_priv.6914 to the function .init.text:NCR53c406a_detect()
The variable driver_template.lto_priv.6914 references
the function __init NCR53c406a_detect()
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the variable:
*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console

The ->detect callback is always entered from the init_this_scsi_driver()
init function, but apparently LTO turns the optimized direct function
call into an indirect call through a non-__initdata pointer.

All drivers using init_this_scsi_driver() are for ancient hardware, and
most don't mark the detect() callback as __init(), so I'm just removing
the annotation here to kill off the warning instead of doing a larger
rework.

[mkp: typo]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

During sync command processing, if legacy INTx status indicates command
is not completed, sample the MSIx register and check if it indicates
command completion, set controller MSIx enabled flag.
Signed-off-by: Prasad B Munirathnam <prasad.munirathnam@microsemi.com>
Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Reviewed-by: Dave Carroll <david.carroll@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Preserve the current MSIX mode value in the OMR before rewriting the OMR
to initiate the IOP or Soft Reset.
Signed-off-by: Prasad B Munirathnam <prasad.munirathnam@microsemi.com>
Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Reviewed-by: Dave Carroll <david.carroll@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

IOP_RESET takes a long time to complete. If controller is in a state
where we can bring it back with init struct, send a DropIO sync command
instead.

 - If controller is faulted perform standard IOP_RESET in aac_srcv_init.

 - If controller is not faulted get adapter properties and extended
   properties.

 - Update the sa_firmware variable and determine if DropIO request is
   supported.

 - Issue DropIO request, and get the number of outstanding commands.

 - If all commands are complete with success (CT_OK), consider IOP_RESET
   is complete.

 - If any commands timeout, Perform the IOP_RESET.
Signed-off-by: Prasad B Munirathnam <prasad.munirathnam@microsemi.com>
Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Reviewed-by: Dave Carroll <david.carroll@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

gcc-8 warns during link-time optimization that the strncpy() call passes
the size of the source buffer rather than the destination:

drivers/scsi/qedf/qedf_dbg.c: In function 'qedf_uevent_emit':
include/linux/string.h:253: error: 'strncpy' specified bound depends on the length of the source argument [-Werror=stringop-overflow=]

This changes it to strscpy() with the correct length, guaranteeing a
properly nul-terminated string of the right size.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

The prototype for qedf_dbg_fops/qedf_debugfs_ops doesn't match the definition,
which causes the final link to fail with link-time optimizations:

drivers/scsi/qedf/qedf_main.c:34: error: type of 'qedf_dbg_fops' does not match original declaration [-Werror=lto-type-mismatch]
 extern struct file_operations qedf_dbg_fops;

drivers/scsi/qedf/qedf_debugfs.c:443: note: 'qedf_dbg_fops' was previously declared here
 const struct file_operations qedf_dbg_fops[] = {

drivers/scsi/qedf/qedf_main.c:33: error: type of 'qedf_debugfs_ops' does not match original declaration [-Werror=lto-type-mismatch]
 extern struct qedf_debugfs_ops qedf_debugfs_ops;

drivers/scsi/qedf/qedf_debugfs.c:102: note: 'qedf_debugfs_ops' was previously declared here
 struct qedf_debugfs_ops qedf_debugfs_ops[] = {

This corrects the prototype and moves it into a shared header file where it
belongs. The file operations can also be marked 'const' like the
qedf_debugfs_ops.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Pointer disc is being intializated a value that is never read and then
re-assigned the same value later on, hence the initialization is
redundant and can be removed.

Cleans up clang warning:
drivers/scsi/libfc/fc_disc.c:734:18: warning: Value stored to 'disc'
during its initialization is never read
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Johannes Thumshirn <jth@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Pointer fcport is initialized with a value that is never read, it is
re-assigned a new value later on, hence the initialization is redundant
and can be removed.

Cleans up clang warning:
drivers/scsi/qedf/qedf_io.c:920:21: warning: Value stored to 'fcport'
during its initialization is never read
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

When link-time optimizations are enabled, qedi fails to build because
of mismatched prototypes:

drivers/scsi/qedi/qedi_gbl.h:27:37: error: type of 'qedi_dbg_fops' does not match original declaration [-Werror=lto-type-mismatch]
 extern const struct file_operations qedi_dbg_fops;
                                     ^
drivers/scsi/qedi/qedi_debugfs.c:239:30: note: 'qedi_dbg_fops' was previously declared here
 const struct file_operations qedi_dbg_fops[] = {
                              ^
drivers/scsi/qedi/qedi_gbl.h:26:32: error: type of 'qedi_debugfs_ops' does not match original declaration [-Werror=lto-type-mismatch]
 extern struct qedi_debugfs_ops qedi_debugfs_ops;
                                ^
drivers/scsi/qedi/qedi_debugfs.c:102:25: note: 'qedi_debugfs_ops' was previously declared here
 struct qedi_debugfs_ops qedi_debugfs_ops[] = {

This changes the declaration to match the definition, and adapts the
users as necessary. Since both array can be constant here, I'm adding
the 'const' everywhere for consistency.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Manish Rangankar <Manish.Rangankar@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

This patch adds two new parameters to the scsi_debug driver.

During various fault injection scenarios it would be useful to be able
to pick a specific starting sector and number of follow on sectors where
a MEDIUM ERROR for reads would be returned against a scsi-debug device.

Right now this only works against sector 0x1234 and OPT_MEDIUM_ERR_NUM
follow on sectors.  However during testing of md-raid and other
scenarios I wanted more flexibility.

The idea is add 2 new parameters:

    medium_error_start
    medium_error_count

If medium_error_start is set then we don't use the default of
OPT_MEDIUM_ERR_ADDR, but use that set value.

If medium_error_count is set we use that value otherwise default to
OPT_MEDIUM_ERR_NUM.
Signed-off-by: Laurence Oberman <loberman@redhat.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Since commit 64d513ac ("scsi: use host wide tags by default") all
SCSI requests have a tag, whether or not scsi-mq is enabled.

Additionally, it is safe to use blk_mq_unique_tag() and
blk_mq_unique_tag_to_hwq() for legacy SCSI queues. Since this means that
the sdebug_mq_active variable is superfluous, remove it.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Not a real RAID level, but some HBAs support JBOD in addition to the
'classical' RAID levels.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Bring the kernel-doc headers in sync with the function argument lists.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Himanshu Madhani <himanshu.madhani@cavium.com>
Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

This patch does not change any functionality but slightly reduces
the size of the compiled kernel module.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Himanshu Madhani <himanshu.madhani@cavium.com>
Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Remove a few preprocessor macros that are not used anywhere.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Himanshu Madhani <himanshu.madhani@cavium.com>
Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Remove a few preprocessor macros that are not used anywhere.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Himanshu Madhani <himanshu.madhani@cavium.com>
Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Using %p instead of %lx to print a pointer allows to remove a cast.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Himanshu Madhani <himanshu.madhani@cavium.com>
Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Updated Copyright in files updated 11.4.0.7
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Update the driver version to 11.4.0.7
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

In a test that is doing large numbers of cable swaps on the target, the
nvme controllers wouldn't reconnect.

During the cable swaps, the targets n_port_id would change. This
information was passed to the nvme-fc transport, in the new remoteport
registration. However, the nvme-fc transport didn't update the n_port_id
value in the remoteport struct when it reused an existing structure.
Later, when a new association was attempted on the remoteport, the
driver's NVME LS routine would use the stale n_port_id from the
remoteport struct to address the LS. As the device is no longer at that
address, the LS would go into never never land.

Separately, the nvme-fc transport will be corrected to update the
n_port_id value on a re-registration.

However, for now, there's no reason to use the transports values.  The
private pointer points to the drivers node structure and the node
structure is up to date. Therefore, revise the LS routine to use the
drivers data structures for the LS. Augmented the debug message for
better debugging in the future.

Also removed a duplicate if check that seems to have slipped in.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Currently, write underruns (mismatch of amount transferred vs scsi
status and its residual) detected by the adapter are not being flagged
as an error. Its expected the target controls the data transfer and
would appropriately set the RSP values.  Only read underruns are treated
as errors.

Revise the SCSI error handling to treat write underruns as an error as
well.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

The driver was inappropriately pulling in the nvme host's nvme.h
header. What it really needed was the standard <linux/nvme.h> header.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

When using the special option to suppress the response iu, ensure the
adapter fully supports the feature by checking feature flags from the
adapter and validating the support when formatting the WQE.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>