Clean up and simplify cs35l41_hda_bind function
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220117160830.709403-6-tanureal@opensource.cirrus.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
Using dev_err_probe() can reduce code size, and the error value
gets printed.
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220117160830.709403-5-tanureal@opensource.cirrus.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Add switch default cases at gpio pins configs
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220117160830.709403-4-tanureal@opensource.cirrus.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Create own namespace and avoid polluting the global namespace
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220117160830.709403-3-tanureal@opensource.cirrus.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

The test key now needs to be manually held when calling
cs35l41_register_errata_patch, after patch:

Add the missing function calls to this driver.

Fixes: f517ba49 ("ASoC: cs35l41: Add support for hibernate memory retention mode")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220117160830.709403-2-tanureal@opensource.cirrus.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

regmap_register_patch can't be used to apply the probe sequence as a
patch is already registers with the regmap by
cs35l41_register_errata_patch and only a single patch can be attached to
a single regmap. The driver doesn't currently rely on a cache sync to
re-apply this probe sequence so simply switch it to a multi write.

Fixes: 7b2f3eb4 ("ALSA: hda: cs35l41: Add support for CS35L41 in HDA systems")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220117160830.709403-1-tanureal@opensource.cirrus.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Some weird devices set the codec SSID vendor ID 0, and
snd_pci_quirk_lookup_id() loop aborts at the point although it should
still try matching with the SSID device ID.  This resulted in a
missing quirk for some old Macs.

Fix the loop termination condition to check both subvendor and
subdevice.

Fixes: 73355ddd ("ALSA: hda: Code refactoring snd_hda_pick_fixup()")
Cc: <stable@vger.kernel.org>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215495
Link: https://lore.kernel.org/r/20220116082838.19382-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

The USB audio device 0db0:419c based on the Realtek ALC4080 chip exposes
all playback volume controls as "PCM". This is makes distinguishing the
individual functions hard.

The added mapping distinguishes all playback volume controls as their
respective function:
 - Speaker              - for back panel output
 - Frontpanel Headphone - for front panel output
 - IEC958               - for digital output on the back panel

This clarifies the individual volume control functions for users.
Signed-off-by: Johannes Schickel <lordhoto@gmail.com>
Link: https://lore.kernel.org/r/20220115140257.8751-1-lordhoto@gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

There are several PCI ids associated with HP EliteBook 855 G8 Notebook
PC. Commit 0e68c4b1 ("ALSA: hda/realtek: fix mute/micmute LEDs for
HP 855 G8") covers 0x103c:0x8896, while this commit covers 0x103c:0x8895
which needs some additional work on top of the quirk from 0e68c4b1.

Note that the device can boot up with working speakers and micmute LED
without this patch, but the success rate would be quite low (order of
16 working boots across 709 boots) at least for the built-in drivers
scenario. This also means that there are some timing issues during early
boot and this patch is a workaround.

With this patch applied speakers and headphones are consistenly working,
as well as mute/micmute LEDs and the internal microphone.
Signed-off-by: Alexander Sergeyev <sergeev917@gmail.com>
Link: https://lore.kernel.org/r/20220114165050.ouw2nknuspclynro@localhost.localdomainSigned-off-by: Takashi Iwai <tiwai@suse.de>

Entries without dmi_table nor codec_hid field need to be placed after
entries with these two fields or they will be always selected.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Link: https://lore.kernel.org/r/20220113105220.1114694-3-brent.lu@intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Add rules to select SOF driver for Jasper Lake systems if digital
microphone is present or the system is a Chromebook.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Link: https://lore.kernel.org/r/20220113105220.1114694-2-brent.lu@intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

If we encounter an error after the kfree(acpi_hw_cfg); then the goto
err; will result in a double free.

Fixes: 7b2f3eb4 ("ALSA: hda: cs35l41: Add support for CS35L41 in HDA systems")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220111072232.GG11243@kiliSigned-off-by: Takashi Iwai <tiwai@suse.de>

Merge tag 'asoc-v5.17-2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v5.17

A few more updates for v5.17, nothing hugely stand out in the few days
since the initial pull request was sent.

CS35L41 SPI and I2C drivers depend on those buses, hence they have to
have dependencies in Kconfig; otherwise it may result in missing
symbols.

Fixes: 7b2f3eb4 ("ALSA: hda: cs35l41: Add support for CS35L41 in HDA systems")
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20220109081337.30623-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

The recently added support for CS35L41 codec unconditionally selects
CONFIG_SND_SOC_CS35L41_LIB, but this can't work unless the top-level
CONFIG_SND_SOC is enabled.  This patch adds the proper dependency.

Fixes: 7b2f3eb4 ("ALSA: hda: cs35l41: Add support for CS35L41 in HDA systems")
Link: https://lore.kernel.org/r/20220107092647.20258-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

The cs35l41 supports a low power DSP memory retention mode. Add support
for entering this mode when then device is not in use.
Co-authored-by: David Rhodes <david.rhodes@cirrus.com>
Signed-off-by: David Rhodes <david.rhodes@cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220107160636.6555-3-ckeepax@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

In preparation for the addition of PM runtime support move the test
key out of the register patches themselves. This is necessary to
allow the test key to be held during cache synchronisation, which is
required by the OTP settings which were unpacked from the device and
written by the driver.

Also whilst at it, the driver uses a mixture of accessing the test key
register by name and by address, consistently use the name.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220107160636.6555-2-ckeepax@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

To maintain the consistency of the code, it should be better to add the
sanity check after calling dma_set_mask_and_coherent(), like
tegra_pcm_dma_allocate() in `sound/soc/tegra/tegra_pcm.c`.
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20220107020851.3095591-1-jiasheng@iscas.ac.cnSigned-off-by: Takashi Iwai <tiwai@suse.de>

Merge series from Shengjiu Wang <shengjiu.wang@nxp.com>:

Several improvement and fixes for AK codecs supported on i.MX platfroms

Currently, rx_port_value is a single unsigned int that gets overwritten
when slim_rx_mux_put() is called for any RX mux, then the same value is
read when slim_rx_mux_get() is called for any of them. This results in
slim_rx_mux_get() reporting the last value set by slim_rx_mux_put()
regardless of which SLIM RX mux is in question.

Turn rx_port_value into an array and store a separate value for each
SLIM RX mux.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Link: https://lore.kernel.org/r/20220104033356.343685-1-y.oudjana@protonmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

RT1019 components was initially registered with i2c1 and i2c2 but
now changed to i2c0 and i2c1 in most of our AMD platforms. Change
default rt1019 components to 10EC1019:00 and 10EC1019:01 which is
aligned with most of AMD machines.

Any exception to rt1019 device ids in near future board design can
be handled using dmi based quirk for that machine.
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Link: https://lore.kernel.org/r/20220106150525.396170-1-AjitKumar.Pandey@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>

seq_virmidi.c: snd_virmidi_new() is already setting seq_mode to
SNDRV_VIRMIDI_SEQ_DISPATCH.
Signed-off-by: Stefan Sauer <st_kost@gmx.de>
Link: https://lore.kernel.org/r/20220106123821.16691-1-st_kost@gmx.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

If a driver does not supply a drain operation for outputs, a default code
path will execute msleep(50). Especially for a virtual midi device
this severely limmits the throughput.

This implementation for the virtual midi driver simply flushes the output
workqueue.
Signed-off-by: Stefan Sauer <st_kost@gmx.de>
Link: https://lore.kernel.org/r/20220106124145.17254-1-st_kost@gmx.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

change 'postion' to 'position'
Signed-off-by: Qinghua Jin <qhjin.dev@gmail.com>
Link: https://lore.kernel.org/r/20220106092847.357035-1-qhjin.dev@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

According to RM, the clock divider range is from 1 to 8, clock
prescaling ratio may be any power of 2 from 1 to 128.
So the supported divider is not all the value between
1 and 1024, just limited value in that range.

Create table for the supported divder and add function to
check the clock divider is available by comparing with
the table.

Fixes: d0250cf4 ("ASoC: fsl_asrc: Add an option to select internal ratio mode")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1641380883-20709-1-git-send-email-shengjiu.wang@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

Some boards have the codec IRQ hooked-up as normally, so the driver can
still do things like headset vs headphones and button-press detection,
but instead of using one of the JD pins of the codec, an external GPIO
is used to report the jack-presence switch status of the jack.

Add support for boards which have this setup and which specify which
external GPIO to use in the special Android AMCR0F28 ACPI device.

And add a quirk for the Asus TF103C tablet which uses this setup.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220106110128.66049-7-hdegoede@redhat.comSigned-off-by: Mark Brown <broonie@kernel.org>

Some X86 tablets, which ship with Android as factory installed OS,
specify codec IRQs/GPIOS in a special Android AMCR0F28 ACPI device.

Add support for retrieving the codec IRQ from this ACPI device instead
of from the 10EC5640 device describing the codec itself and enable this
on Asus MemoPad 7 ME176C tablets.

This fixes jack-detect not working on these tablets.

Cc: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220106110128.66049-6-hdegoede@redhat.comSigned-off-by: Mark Brown <broonie@kernel.org>

Some boards have the codec IRQ hooked-up as normally, so the driver can
still do things like headset vs headphones and button-press detection,
but instead of using one of the JD pins of the codec, an external GPIO
is used to report the jack-presence switch status of the jack.

Add support for this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220106110128.66049-5-hdegoede@redhat.comSigned-off-by: Mark Brown <broonie@kernel.org>

On some boards where the firmware/fwnode information is in essence
read-only (x86 + ACPI boards) the i2c_client for the codec may contain
the wrong IRQ or no IRQ at all.

Since we only request the IRQ once snd_soc_component_set_jack() gets
called, allow machine drivers to override the IRQ with the proper one
through the data parameter to snd_soc_component_set_jack().
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220106110128.66049-4-hdegoede@redhat.comSigned-off-by: Mark Brown <broonie@kernel.org>

Change jack_work from a struct work_struct to a struct delayed_work, this
is a preparation patch for adding support for boards where an external
GPIO is used for jack-detect, rather then one of the JD pins of the codec.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220106110128.66049-3-hdegoede@redhat.comSigned-off-by: Mark Brown <broonie@kernel.org>

Commit 2b9c8d2b ("ASoC: rt5640: Add the HDA header support") adds
re-queuing of the jack_work on resume when rt5640->jd_src != 0.

But the jack_work will unconditionally deref rt5640->jack and that might
be NULL. E.g. the sound/soc/intel/boards/bytcr_rt5640.c machine driver
call snd_soc_component_set_jack(codec, NULL, NULL) from pre_suspend to
disable the IRQ to avoid spurious wakeups, so when rt5640_resume()
runs rt5640->jack will be NULL in this case.

Make the queueing of the work conditional on rt5640->jack instead of
on rt5640->jd_src to fix this.

Fixes: 2b9c8d2b ("ASoC: rt5640: Add the HDA header support")
Cc: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220106110128.66049-2-hdegoede@redhat.comSigned-off-by: Mark Brown <broonie@kernel.org>

According to RM, on auto mode:
For codec AK4458 and AK4497, the lowest ratio of MLCK/FS is 256
if sample rate is 8kHz-48kHz,
For codec AK5558, the lowest ratio of MLCK/FS is 512 if sample
rate is 8kHz-48kHz.

With these setting the sound quality for 8kHz-48kHz can be improved.

Fixes: aa736700 ("ASoC: imx-card: Add imx-card machine driver")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1641292835-19085-4-git-send-email-shengjiu.wang@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

Transfer the refined slots and slot_width to akcodec_get_mclk_rate()
for mclk calculation, otherwise the mclk frequency does not match
with the slots and slot_width for S16_LE format, because the default
slot_width is 32.

Fixes: aa736700 ("ASoC: imx-card: Add imx-card machine driver")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1641292835-19085-3-git-send-email-shengjiu.wang@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

The SAI on i.MX8MQ don't support one2one ratio for mclk:bclk, so
the mclk frequency exceeds the supported range of codec for
the case that sample rate is larger than 705kHZ and format is
S32_LE. Update the supported width for such case.

Fixes: aa736700 ("ASoC: imx-card: Add imx-card machine driver")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1641292835-19085-2-git-send-email-shengjiu.wang@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

The speaker fixup that is used for the Yoga 7 14ITL5 also applies to
the IdeaPad Slim 9i 14ITL5. The attached patch applies the quirk to
initialise the amplifier on the IdeaPad Slim 9i as well.

This is validated to work on my laptop.

[ corrected the quirk entry position by tiwai ]
Signed-off-by: Bart Kroon <bart@tarmack.eu>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/JAG24R.7NLJGWBF4G8U@tarmack.euSigned-off-by: Takashi Iwai <tiwai@suse.de>

A randconfig caught a compile warning that is now treated as a fatal
error:
  sound/soc/codecs/ak4375.c:415:13: error: ‘ak4375_power_off’ defined but not used [-Werror=unused-function]

where ak4375_power_off() is used only from the PM handler.

As both suspend and resumes are already marked with __maybe_unused,
let's rip off the superfluous ifdef CONFIG_PM, so that the error above
can be avoided.

Fixes: 53778b82 ("ASoC: Add AK4375 support")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20220105162409.20635-1-tiwai@suse.deSigned-off-by: Mark Brown <broonie@kernel.org>

Add support for two CS35L41 using I2C bus and the component
binding method

[ Fix the entries to be sorted order by tiwai ]
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20211217115708.882525-11-tanureal@opensource.cirrus.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Add Support for CS35L41 using the component binding
method

[ corrected the quirk entry position by tiwai ]
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20211217115708.882525-10-tanureal@opensource.cirrus.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Add support for CS35L41 using a new separated driver
that can be used in all upcoming designs
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20211217115708.882525-8-tanureal@opensource.cirrus.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

The recent few quirk entries for Lenovo haven't been put in the right
order.  Let's arrange the table again.

Fixes: ad7cc2d4 ("ALSA: hda/realtek: Quirks to enable speaker output...")
Fixes: 6dc86976 ("ALSA: hda/realtek: Add speaker fixup for some Yoga 15ITL5 devices")
Fixes: 8f4c9042 ("ALSA: hda/realtek: Add quirk for Legion Y9000X 2020")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>