- 25 Jan, 2024 1 commit
-
-
David Lechner authored
In __spi_pump_transfer_message(), the message was not finalized in the first error return as it is in the other error return paths. Not finalizing the message could cause anything waiting on the message to complete to hang forever. This adds the missing call to spi_finalize_current_message(). Fixes: ae7d2346 ("spi: Don't use the message queue if possible in spi_sync") Signed-off-by:
David Lechner <dlechner@baylibre.com> Link: https://msgid.link/r/20240125205312.3458541-2-dlechner@baylibre.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
- 24 Jan, 2024 2 commits
-
-
Charles Keepax authored
As it devm_pm_runtime_enable can fail due to memory allocations, it is best to handle the error. Suggested-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://msgid.link/r/20240124174101.2270249-1-ckeepax@opensource.cirrus.comSigned-off-by:
-
Mark Brown authored
As reported by Guenter the limit we've got on the number of chip selects is set too low for some systems, raise the limit. We should really remove the hard coded limit but this is needed as a fix so let's do the simple thing and raise the limit for now. Fixes: 4d8ff6b0 ("spi: Add multi-cs memories support in SPI core") Reported-by:
Guenter Roeck <linux@roeck-us.net> Suggested-by:
-
- 23 Jan, 2024 4 commits
-
-
Devyn Liu authored
Return IRQ_NONE from the interrupt handler when no interrupt was detected. Because an empty interrupt will cause a null pointer error: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 Call trace: complete+0x54/0x100 hisi_sfc_v3xx_isr+0x2c/0x40 [spi_hisi_sfc_v3xx] __handle_irq_event_percpu+0x64/0x1e0 handle_irq_event+0x7c/0x1cc Signed-off-by:Devyn Liu <liudingyuan@huawei.com> Link: https://msgid.link/r/20240123071149.917678-1-liudingyuan@huawei.comSigned-off-by:
-
Amit Kumar Mahapatra authored
In the existing implementation, when executing interleaved write and read operations in the ISR for a transfer length greater than the FIFO size, the TXFIFO write precedes the RXFIFO read. Consequently, the initially received data in the RXFIFO is pushed out and lost, leading to a failure in data integrity. To address this issue, reverse the order of interleaved operations and conduct the RXFIFO read followed by the TXFIFO write. Fixes: 6afe2ae8 ("spi: spi-cadence: Interleave write of TX and read of RX FIFO") Signed-off-by:
Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com> Link: https://msgid.link/r/20231218090652.18403-1-amit.kumar-mahapatra@amd.comSigned-off-by:
-
Alexander Stein authored
If dma_request_chan() fails, no error is shown nor any information is shown in /sys/kernel/debug/devices_deferred if -EPROBE_DEFER is returned. Use dev_err_probe to fix both problems. Signed-off-by:
Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by:
Francesco Dolcini <francesco.dolcini@toradex.com> Link: https://msgid.link/r/20240110085403.457089-1-alexander.stein@ew.tq-group.comSigned-off-by:
-
Kamal Dasu authored
SFDP read shall use the mspi reads when using the bcm_qspi_exec_mem_op() call. This fixes SFDP parameter page read failures seen with parts that now use SFDP protocol to read the basic flash parameter table. Fixes: 5f195ee7 ("spi: bcm-qspi: Implement the spi_mem interface") Signed-off-by:
Kamal Dasu <kamal.dasu@broadcom.com> Tested-by:
Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by:
-
- 22 Jan, 2024 2 commits
-
-
Mika Westerberg authored
This adds the PCI ID of the Arrow Lake and Meteor Lake-S PCH SPI serial flash controller. This one supports all the necessary commands Linux SPI-NOR stack requires. Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Link: https://msgid.link/r/20240122120034.2664812-3-mika.westerberg@linux.intel.comSigned-off-by:
-
Mika Westerberg authored
Turns out this "SoC" side controller does not support certain commands, such as reading chip JEDEC ID, so the controller is pretty much unusable in Linux. We should be using the "PCH" side controller instead. For this reason remove this PCI ID from the list. Fixes: c2912d42 ("spi: intel-pci: Add support for Meteor Lake-S SPI serial flash") Signed-off-by:
-
- 21 Jan, 2024 31 commits
-
-
Linus Torvalds authored
-
https://evilpiepirate.org/git/bcachefsLinus Torvalds authored
Pull more bcachefs updates from Kent Overstreet: "Some fixes, Some refactoring, some minor features: - Assorted prep work for disk space accounting rewrite - BTREE_TRIGGER_ATOMIC: after combining our trigger callbacks, this makes our trigger context more explicit - A few fixes to avoid excessive transaction restarts on multithreaded workloads: fstests (in addition to ktest tests) are now checking slowpath counters, and that's shaking out a few bugs - Assorted tracepoint improvements - Starting to break up bcachefs_format.h and move on disk types so they're with the code they belong to; this will make room to start documenting the on disk format better. - A few minor fixes" * tag 'bcachefs-2024-01-21' of https://evilpiepirate.org/git/bcachefs: (46 commits) bcachefs: Improve inode_to_text() bcachefs: logged_ops_format.h bcachefs: reflink_format.h bcachefs; extents_format.h bcachefs: ec_format.h bcachefs: subvolume_format.h bcachefs: snapshot_format.h bcachefs: alloc_background_format.h bcachefs: xattr_format.h bcachefs: dirent_format.h bcachefs: inode_format.h bcachefs; quota_format.h bcachefs: sb-counters_format.h bcachefs: counters.c -> sb-counters.c bcachefs: comment bch_subvolume bcachefs: bch_snapshot::btime bcachefs: add missing __GFP_NOWARN bcachefs: opts->compression can now also be applied in the background bcachefs: Prep work for variable size btree node buffers bcachefs: grab s_umount only if snapshotting ... -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer updates from Thomas Gleixner: "Updates for time and clocksources: - A fix for the idle and iowait time accounting vs CPU hotplug. The time is reset on CPU hotplug which makes the accumulated systemwide time jump backwards. - Assorted fixes and improvements for clocksource/event drivers" * tag 'timers-core-2024-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tick-sched: Fix idle and iowait sleeptime accounting vs CPU hotplug clocksource/drivers/ep93xx: Fix error handling during probe clocksource/drivers/cadence-ttc: Fix some kernel-doc warnings clocksource/drivers/timer-ti-dm: Fix make W=n kerneldoc warnings clocksource/timer-riscv: Add riscv_clock_shutdown callback dt-bindings: timer: Add StarFive JH8100 clint dt-bindings: timer: thead,c900-aclint-mtimer: separate mtime and mtimecmp regs -
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Aneesh Kumar: - Increase default stack size to 32KB for Book3S Thanks to Michael Ellerman. * tag 'powerpc-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64s: Increase default stack size to 32KB
-
Kent Overstreet authored
Add line breaks - inode_to_text() is now much easier to read. Signed-off-by:Kent Overstreet <kent.overstreet@linux.dev>
-
Kent Overstreet authored
Signed-off-by: -
Kent Overstreet authored
Signed-off-by: -
Kent Overstreet authored
Signed-off-by: -
Kent Overstreet authored
Signed-off-by: -
Kent Overstreet authored
Signed-off-by: -
Kent Overstreet authored
Signed-off-by: -
Kent Overstreet authored
Signed-off-by: -
Kent Overstreet authored
Signed-off-by: -
Kent Overstreet authored
Signed-off-by: -
Kent Overstreet authored
Signed-off-by: -
Kent Overstreet authored
Signed-off-by: -
Kent Overstreet authored
bcachefs_format.h has gotten too big; let's do some organizing. Signed-off-by: -
Kent Overstreet authored
Signed-off-by: -
Kent Overstreet authored
Signed-off-by: -
Kent Overstreet authored
Add a field to bch_snapshot for creation time; this will be important when we start exposing the snapshot tree to userspace. Signed-off-by: -
Kent Overstreet authored
Signed-off-by: -
Kent Overstreet authored
The "apply this compression method in the background" paths now use the compression option if background_compression is not set; this means that setting or changing the compression option will cause existing data to be compressed accordingly in the background. Signed-off-by: -
Kent Overstreet authored
bcachefs btree nodes are big - typically 256k - and btree roots are pinned in memory. As we're now up to 18 btrees, we now have significant memory overhead in mostly empty btree roots. And in the future we're going to start enforcing that certain btree node boundaries exist, to solve lock contention issues - analagous to XFS's AGIs. Thus, we need to start allocating smaller btree node buffers when we can. This patch changes code that refers to the filesystem constant c->opts.btree_node_size to refer to the btree node buffer size - btree_buf_bytes() - where appropriate. Signed-off-by: -
Su Yue authored
When I was testing mongodb over bcachefs with compression, there is a lockdep warning when snapshotting mongodb data volume. $ cat test.sh prog=bcachefs $prog subvolume create /mnt/data $prog subvolume create /mnt/data/snapshots while true;do $prog subvolume snapshot /mnt/data /mnt/data/snapshots/$(date +%s) sleep 1s done $ cat /etc/mongodb.conf systemLog: destination: file logAppend: true path: /mnt/data/mongod.log storage: dbPath: /mnt/data/ lockdep reports: [ 3437.452330] ====================================================== [ 3437.452750] WARNING: possible circular locking dependency detected [ 3437.453168] 6.7.0-rc7-custom+ #85 Tainted: G E [ 3437.453562] ------------------------------------------------------ [ 3437.453981] bcachefs/35533 is trying to acquire lock: [ 3437.454325] ffffa0a02b2b1418 (sb_writers#10){.+.+}-{0:0}, at: filename_create+0x62/0x190 [ 3437.454875] but task is already holding lock: [ 3437.455268] ffffa0a02b2b10e0 (&type->s_umount_key#48){.+.+}-{3:3}, at: bch2_fs_file_ioctl+0x232/0xc90 [bcachefs] [ 3437.456009] which lock already depends on the new lock. [ 3437.456553] the existing dependency chain (in reverse order) is: [ 3437.457054] -> #3 (&type->s_umount_key#48){.+.+}-{3:3}: [ 3437.457507] down_read+0x3e/0x170 [ 3437.457772] bch2_fs_file_ioctl+0x232/0xc90 [bcachefs] [ 3437.458206] __x64_sys_ioctl+0x93/0xd0 [ 3437.458498] do_syscall_64+0x42/0xf0 [ 3437.458779] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 3437.459155] -> #2 (&c->snapshot_create_lock){++++}-{3:3}: [ 3437.459615] down_read+0x3e/0x170 [ 3437.459878] bch2_truncate+0x82/0x110 [bcachefs] [ 3437.460276] bchfs_truncate+0x254/0x3c0 [bcachefs] [ 3437.460686] notify_change+0x1f1/0x4a0 [ 3437.461283] do_truncate+0x7f/0xd0 [ 3437.461555] path_openat+0xa57/0xce0 [ 3437.461836] do_filp_open+0xb4/0x160 [ 3437.462116] do_sys_openat2+0x91/0xc0 [ 3437.462402] __x64_sys_openat+0x53/0xa0 [ 3437.462701] do_syscall_64+0x42/0xf0 [ 3437.462982] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 3437.463359] -> #1 (&sb->s_type->i_mutex_key#15){+.+.}-{3:3}: [ 3437.463843] down_write+0x3b/0xc0 [ 3437.464223] bch2_write_iter+0x5b/0xcc0 [bcachefs] [ 3437.464493] vfs_write+0x21b/0x4c0 [ 3437.464653] ksys_write+0x69/0xf0 [ 3437.464839] do_syscall_64+0x42/0xf0 [ 3437.465009] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 3437.465231] -> #0 (sb_writers#10){.+.+}-{0:0}: [ 3437.465471] __lock_acquire+0x1455/0x21b0 [ 3437.465656] lock_acquire+0xc6/0x2b0 [ 3437.465822] mnt_want_write+0x46/0x1a0 [ 3437.465996] filename_create+0x62/0x190 [ 3437.466175] user_path_create+0x2d/0x50 [ 3437.466352] bch2_fs_file_ioctl+0x2ec/0xc90 [bcachefs] [ 3437.466617] __x64_sys_ioctl+0x93/0xd0 [ 3437.466791] do_syscall_64+0x42/0xf0 [ 3437.466957] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 3437.467180] other info that might help us debug this: [ 3437.469670] 2 locks held by bcachefs/35533: other info that might help us debug this: [ 3437.467507] Chain exists of: sb_writers#10 --> &c->snapshot_create_lock --> &type->s_umount_key#48 [ 3437.467979] Possible unsafe locking scenario: [ 3437.468223] CPU0 CPU1 [ 3437.468405] ---- ---- [ 3437.468585] rlock(&type->s_umount_key#48); [ 3437.468758] lock(&c->snapshot_create_lock); [ 3437.469030] lock(&type->s_umount_key#48); [ 3437.469291] rlock(sb_writers#10); [ 3437.469434] *** DEADLOCK *** [ 3437.469670] 2 locks held by bcachefs/35533: [ 3437.469838] #0: ffffa0a02ce00a88 (&c->snapshot_create_lock){++++}-{3:3}, at: bch2_fs_file_ioctl+0x1e3/0xc90 [bcachefs] [ 3437.470294] #1: ffffa0a02b2b10e0 (&type->s_umount_key#48){.+.+}-{3:3}, at: bch2_fs_file_ioctl+0x232/0xc90 [bcachefs] [ 3437.470744] stack backtrace: [ 3437.470922] CPU: 7 PID: 35533 Comm: bcachefs Kdump: loaded Tainted: G E 6.7.0-rc7-custom+ #85 [ 3437.471313] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014 [ 3437.471694] Call Trace: [ 3437.471795] <TASK> [ 3437.471884] dump_stack_lvl+0x57/0x90 [ 3437.472035] check_noncircular+0x132/0x150 [ 3437.472202] __lock_acquire+0x1455/0x21b0 [ 3437.472369] lock_acquire+0xc6/0x2b0 [ 3437.472518] ? filename_create+0x62/0x190 [ 3437.472683] ? lock_is_held_type+0x97/0x110 [ 3437.472856] mnt_want_write+0x46/0x1a0 [ 3437.473025] ? filename_create+0x62/0x190 [ 3437.473204] filename_create+0x62/0x190 [ 3437.473380] user_path_create+0x2d/0x50 [ 3437.473555] bch2_fs_file_ioctl+0x2ec/0xc90 [bcachefs] [ 3437.473819] ? lock_acquire+0xc6/0x2b0 [ 3437.474002] ? __fget_files+0x2a/0x190 [ 3437.474195] ? __fget_files+0xbc/0x190 [ 3437.474380] ? lock_release+0xc5/0x270 [ 3437.474567] ? __x64_sys_ioctl+0x93/0xd0 [ 3437.474764] ? __pfx_bch2_fs_file_ioctl+0x10/0x10 [bcachefs] [ 3437.475090] __x64_sys_ioctl+0x93/0xd0 [ 3437.475277] do_syscall_64+0x42/0xf0 [ 3437.475454] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 3437.475691] RIP: 0033:0x7f2743c313af ====================================================== In __bch2_ioctl_subvolume_create(), we grab s_umount unconditionally and unlock it at the end of the function. There is a comment "why do we need this lock?" about the lock coming from commit 42d23732 ("bcachefs: Snapshot creation, deletion") The reason is that __bch2_ioctl_subvolume_create() calls sync_inodes_sb() which enforce locked s_umount to writeback all dirty nodes before doing snapshot works. Fix it by read locking s_umount for snapshotting only and unlocking s_umount after sync_inodes_sb(). Signed-off-by:Su Yue <glass.su@suse.com> Signed-off-by:
-
Su Yue authored
bch_fs::snapshots is allocated by kvzalloc in __snapshot_t_mut. It should be freed by kvfree not kfree. Or umount will triger: [ 406.829178 ] BUG: unable to handle page fault for address: ffffe7b487148008 [ 406.830676 ] #PF: supervisor read access in kernel mode [ 406.831643 ] #PF: error_code(0x0000) - not-present page [ 406.832487 ] PGD 0 P4D 0 [ 406.832898 ] Oops: 0000 [#1] PREEMPT SMP PTI [ 406.833512 ] CPU: 2 PID: 1754 Comm: umount Kdump: loaded Tainted: G OE 6.7.0-rc7-custom+ #90 [ 406.834746 ] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014 [ 406.835796 ] RIP: 0010:kfree+0x62/0x140 [ 406.836197 ] Code: 80 48 01 d8 0f 82 e9 00 00 00 48 c7 c2 00 00 00 80 48 2b 15 78 9f 1f 01 48 01 d0 48 c1 e8 0c 48 c1 e0 06 48 03 05 56 9f 1f 01 <48> 8b 50 08 48 89 c7 f6 c2 01 0f 85 b0 00 00 00 66 90 48 8b 07 f6 [ 406.837810 ] RSP: 0018:ffffb9d641607e48 EFLAGS: 00010286 [ 406.838213 ] RAX: ffffe7b487148000 RBX: ffffb9d645200000 RCX: ffffb9d641607dc4 [ 406.838738 ] RDX: 000065bb00000000 RSI: ffffffffc0d88b84 RDI: ffffb9d645200000 [ 406.839217 ] RBP: ffff9a4625d00068 R08: 0000000000000001 R09: 0000000000000001 [ 406.839650 ] R10: 0000000000000001 R11: 000000000000001f R12: ffff9a4625d4da80 [ 406.840055 ] R13: ffff9a4625d00000 R14: ffffffffc0e2eb20 R15: 0000000000000000 [ 406.840451 ] FS: 00007f0a264ffb80(0000) GS:ffff9a4e2d500000(0000) knlGS:0000000000000000 [ 406.840851 ] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 406.841125 ] CR2: ffffe7b487148008 CR3: 000000018c4d2000 CR4: 00000000000006f0 [ 406.841464 ] Call Trace: [ 406.841583 ] <TASK> [ 406.841682 ] ? __die+0x1f/0x70 [ 406.841828 ] ? page_fault_oops+0x159/0x470 [ 406.842014 ] ? fixup_exception+0x22/0x310 [ 406.842198 ] ? exc_page_fault+0x1ed/0x200 [ 406.842382 ] ? asm_exc_page_fault+0x22/0x30 [ 406.842574 ] ? bch2_fs_release+0x54/0x280 [bcachefs] [ 406.842842 ] ? kfree+0x62/0x140 [ 406.842988 ] ? kfree+0x104/0x140 [ 406.843138 ] bch2_fs_release+0x54/0x280 [bcachefs] [ 406.843390 ] kobject_put+0xb7/0x170 [ 406.843552 ] deactivate_locked_super+0x2f/0xa0 [ 406.843756 ] cleanup_mnt+0xba/0x150 [ 406.843917 ] task_work_run+0x59/0xa0 [ 406.844083 ] exit_to_user_mode_prepare+0x197/0x1a0 [ 406.844302 ] syscall_exit_to_user_mode+0x16/0x40 [ 406.844510 ] do_syscall_64+0x4e/0xf0 [ 406.844675 ] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 406.844907 ] RIP: 0033:0x7f0a2664e4fb Signed-off-by:
Brian Foster <bfoster@redhat.com> Signed-off-by:
-
Kent Overstreet authored
Fixes: 023f9ac9 bcachefs: Delete dio read alignment check Reported-by:
-
Colin Ian King authored
The variable tmp is being assigned a value but it isn't being read afterwards. The assignment is redundant and so tmp can be removed. Cleans up clang scan build warning: warning: Although the value stored to 'ret' is used in the enclosing expression, the value is never actually read from 'ret' [deadcode.DeadStores] Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Reviewed-by:
-
Kent Overstreet authored
Signed-off-by: -
Kent Overstreet authored
drop_locks_do() should not be used in a fastpath without first trying the do in nonblocking mode - the unlock and relock will cause excessive transaction restarts and potentially livelocking with other threads that are contending for the same locks. Signed-off-by: -
Kent Overstreet authored
Signed-off-by: -
Kent Overstreet authored
Signed-off-by:
-
