Pull irq fixes from Borislav Petkov:

 - Make sure GICv4 always gets initialized to prevent a kexec-ed kernel
   from silently failing to set it up

 - Do not call bus_get_dev_root() for the mbigen irqchip as it always
   returns NULL - use NULL directly

 - Fix hardware interrupt number truncation when assigning MSI
   interrupts

 - Correct sending end-of-interrupt messages to disabled interrupts
   lines on RISC-V PLIC

* tag 'irq_urgent_for_v6.8_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/gic-v3-its: Do not assume vPE tables are preallocated
  irqchip/mbigen: Don't use bus_get_dev_root() to find the parent
  PCI/MSI: Prevent MSI hardware interrupt number truncation
  irqchip/sifive-plic: Enable interrupt if needed before EOI

Pull erofs fix from Gao Xiang:

 - Fix page refcount leak when looking up specific inodes
   introduced by metabuf reworking

* tag 'erofs-for-6.8-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
  erofs: fix refcount on the metabuf used for inode lookup

Pull RCU pathwalk fixes from Al Viro:
 "We still have some races in filesystem methods when exposed to RCU
  pathwalk. This series is a result of code audit (the second round of
  it) and it should deal with most of that stuff.

  Still pending: ntfs3 ->d_hash()/->d_compare() and ceph_d_revalidate().
  Up to maintainers (a note for NTFS folks - when documentation says
  that a method may not block, it *does* imply that blocking allocations
  are to be avoided. Really)"

[ More explanations for people who aren't familiar with the vagaries of
  RCU path walking: most of it is hidden from filesystems, but if a
  filesystem actively participates in the low-level path walking it
  needs to make sure the fields involved in that walk are RCU-safe.

  That "actively participate in low-level path walking" includes things
  like having its own ->d_hash()/->d_compare() routines, or by having
  its own directory permission function that doesn't just use the common
  helpers.  Having a ->d_revalidate() function will also have this issue.

  Note that instead of making everything RCU safe you can also choose to
  abort the RCU pathwalk if your operation cannot be done safely under
  RCU, but that obviously comes with a performance penalty. One common
  pattern is to allow the simple cases under RCU, and abort only if you
  need to do something more complicated.

  So not everything needs to be RCU-safe, and things like the inode etc
  that the VFS itself maintains obviously already are. But these fixes
  tend to be about properly RCU-delaying things like ->s_fs_info that
  are maintained by the filesystem and that got potentially released too
  early.   - Linus ]

* tag 'pull-fixes.pathwalk-rcu-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  ext4_get_link(): fix breakage in RCU mode
  cifs_get_link(): bail out in unsafe case
  fuse: fix UAF in rcu pathwalks
  procfs: make freeing proc_fs_info rcu-delayed
  procfs: move dropping pde and pid from ->evict_inode() to ->free_inode()
  nfs: fix UAF on pathwalk running into umount
  nfs: make nfs_set_verifier() safe for use in RCU pathwalk
  afs: fix __afs_break_callback() / afs_drop_open_mmap() race
  hfsplus: switch to rcu-delayed unloading of nls and freeing ->s_fs_info
  exfat: move freeing sbi, upcase table and dropping nls into rcu-delayed helper
  affs: free affs_sb_info with kfree_rcu()
  rcu pathwalk: prevent bogus hard errors from may_lookup()
  fs/super.c: don't drop ->s_user_ns until we free struct super_block itself

Pull vfs fixes from Al Viro:
 "A couple of fixes - revert of regression from this cycle and a fix for
  erofs failure exit breakage (had been there since way back)"

* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  erofs: fix handling kern_mount() failure
  Revert "get rid of DCACHE_GENOCIDE"

1) errors from ext4_getblk() should not be propagated to caller
unless we are really sure that we would've gotten the same error
in non-RCU pathwalk.
2) we leak buffer_heads if ext4_getblk() is successful, but bh is
not uptodate.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

->d_revalidate() bails out there, anyway.  It's not enough
to prevent getting into ->get_link() in RCU mode, but that
could happen only in a very contrieved setup.  Not worth
trying to do anything fancy here unless ->d_revalidate()
stops kicking out of RCU mode at least in some cases.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

->permission(), ->get_link() and ->inode_get_acl() might dereference
->s_fs_info (and, in case of ->permission(), ->s_fs_info->fc->user_ns
as well) when called from rcu pathwalk.

Freeing ->s_fs_info->fc is rcu-delayed; we need to make freeing ->s_fs_info
and dropping ->user_ns rcu-delayed too.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

makes proc_pid_ns() safe from rcu pathwalk (put_pid_ns()
is still synchronous, but that's not a problem - it does
rcu-delay everything that needs to be)
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

that keeps both around until struct inode is freed, making access
to them safe from rcu-pathwalk
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

NFS ->d_revalidate(), ->permission() and ->get_link() need to access
some parts of nfs_server when called in RCU mode:
	server->flags
	server->caps
	*(server->io_stats)
and, worst of all, call
	server->nfs_client->rpc_ops->have_delegation
(the last one - as NFS_PROTO(inode)->have_delegation()).  We really
don't want to RCU-delay the entire nfs_free_server() (it would have
to be done with schedule_work() from RCU callback, since it can't
be made to run from interrupt context), but actual freeing of
nfs_server and ->io_stats can be done via call_rcu() just fine.
nfs_client part is handled simply by making nfs_free_client() use
kfree_rcu().
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

nfs_set_verifier() relies upon dentry being pinned; if that's
the case, grabbing ->d_lock stabilizes ->d_parent and guarantees
that ->d_parent points to a positive dentry.  For something
we'd run into in RCU mode that is *not* true - dentry might've
been through dentry_kill() just as we grabbed ->d_lock, with
its parent going through the same just as we get to into
nfs_set_verifier_locked().  It might get to detaching inode
(and zeroing ->d_inode) before nfs_set_verifier_locked() gets
to fetching that; we get an oops as the result.

That can happen in nfs{,4} ->d_revalidate(); the call chain in
question is nfs_set_verifier_locked() <- nfs_set_verifier() <-
nfs_lookup_revalidate_delegated() <- nfs{,4}_do_lookup_revalidate().
We have checked that the parent had been positive, but that's
done before we get to nfs_set_verifier() and it's possible for
memory pressure to pick our dentry as eviction candidate by that
time.  If that happens, back-to-back attempts to kill dentry and
its parent are quite normal.  Sure, in case of eviction we'll
fail the ->d_seq check in the caller, but we need to survive
until we return there...
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

In __afs_break_callback() we might check ->cb_nr_mmap and if it's non-zero
do queue_work(&vnode->cb_work).  In afs_drop_open_mmap() we decrement
->cb_nr_mmap and do flush_work(&vnode->cb_work) if it reaches zero.

The trouble is, there's nothing to prevent __afs_break_callback() from
seeing ->cb_nr_mmap before the decrement and do queue_work() after both
the decrement and flush_work().  If that happens, we might be in trouble -
vnode might get freed before the queued work runs.

__afs_break_callback() is always done under ->cb_lock, so let's make
sure that ->cb_nr_mmap can change from non-zero to zero while holding
->cb_lock (the spinlock component of it - it's a seqlock and we don't
need to mess with the counter).
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

->d_hash() and ->d_compare() use those, so we need to delay freeing
them.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

That stuff can be accessed by ->d_hash()/->d_compare(); as it is, we have
a hard-to-hit UAF if rcu pathwalk manages to get into ->d_hash() on a filesystem
that is in process of getting shut down.

Besides, having nls and upcase table cleanup moved from ->put_super() towards
the place where sbi is freed makes for simpler failure exits.
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

one of the flags in it is used by ->d_hash()/->d_compare()
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

If lazy call of ->permission() returns a hard error, check that
try_to_unlazy() succeeds before returning it.  That both makes
life easier for ->permission() instances and closes the race
in ENOTDIR handling - it is possible that positive d_can_lookup()
seen in link_path_walk() applies to the state *after* unlink() +
mkdir(), while nd->inode matches the state prior to that.

Normally seeing e.g. EACCES from permission check in rcu pathwalk
means that with some timings non-rcu pathwalk would've run into
the same; however, running into a non-executable regular file
in the middle of a pathname would not get to permission check -
it would fail with ENOTDIR instead.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Avoids fun races in RCU pathwalk...  Same goes for freeing LSM shite
hanging off super_block's arse.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Pull powerpc fixes from Michael Ellerman:

 - Fix a crash when hot adding a PCI device to an LPAR since
   recent changes

 - Fix nested KVM level-2 guest reboot failure due to empty
   'arch_compat'

Thanks to Amit Machhiwal, Aneesh Kumar K.V (IBM), Brian King, Gaurav
Batra, and Vaibhav Jain.

* tag 'powerpc-6.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  KVM: PPC: Book3S HV: Fix L2 guest reboot failure due to empty 'arch_compat'
  powerpc/pseries/iommu: DLPAR add doesn't completely initialize pci_controller

Pull iommu fixes from Joerg Roedel:

 - Intel VT-d fixes for nested domain handling:

      - Cache invalidation for changes in a parent domain

      - Dirty tracking setting for parent and nested domains

      - Fix a constant-out-of-range warning

 - ARM SMMU fixes:

      - Fix CD allocation from atomic context when using SVA with SMMUv3

      - Revert the conversion of SMMUv2 to domain_alloc_paging(), as it
        breaks the boot for Qualcomm MSM8996 devices

 - Restore SVA handle sharing in core code as it turned out there are
   still drivers relying on it

* tag 'iommu-fixes-v6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/sva: Restore SVA handle sharing
  iommu/arm-smmu-v3: Do not use GFP_KERNEL under as spinlock
  iommu/vt-d: Fix constant-out-of-range warning
  iommu/vt-d: Set SSADE when attaching to a parent with dirty tracking
  iommu/vt-d: Add missing dirty tracking set for parent domain
  iommu/vt-d: Wrap the dirty tracking loop to be a helper
  iommu/vt-d: Remove domain parameter for intel_pasid_setup_dirty_tracking()
  iommu/vt-d: Add missing device iotlb flush for parent domain
  iommu/vt-d: Update iotlb in nested domain attach
  iommu/vt-d: Add missing iotlb flush for parent domain
  iommu/vt-d: Add __iommu_flush_iotlb_psi()
  iommu/vt-d: Track nested domains in parent
  Revert "iommu/arm-smmu: Convert to domain_alloc_paging()"

Pull cxl fixes from Dan Williams:
 "A collection of significant fixes for the CXL subsystem.

  The largest change in this set, that bordered on "new development", is
  the fix for the fact that the location of the new qos_class attribute
  did not match the Documentation. The fix ends up deleting more code
  than it added, and it has a new unit test to backstop basic errors in
  this interface going forward. So the "red-diff" and unit test saved
  the "rip it out and try again" response.

  In contrast, the new notification path for firmware reported CXL
  errors (CXL CPER notifications) has a locking context bug that can not
  be fixed with a red-diff. Given where the release cycle stands, it is
  not comfortable to squeeze in that fix in these waning days. So, that
  receives the "back it out and try again later" treatment.

  There is a regression fix in the code that establishes memory NUMA
  nodes for platform CXL regions. That has an ack from x86 folks. There
  are a couple more fixups for Linux to understand (reassemble) CXL
  regions instantiated by platform firmware. The policy around platforms
  that do not match host-physical-address with system-physical-address
  (i.e. systems that have an address translation mechanism between the
  address range reported in the ACPI CEDT.CFMWS and endpoint decoders)
  has been softened to abort driver load rather than teardown the memory
  range (can cause system hangs). Lastly, there is a robustness /
  regression fix for cases where the driver would previously continue in
  the face of error, and a fixup for PCI error notification handling.

  Summary:

   - Fix NUMA initialization from ACPI CEDT.CFMWS

   - Fix region assembly failures due to async init order

   - Fix / simplify export of qos_class information

   - Fix cxl_acpi initialization vs single-window-init failures

   - Fix handling of repeated 'pci_channel_io_frozen' notifications

   - Workaround platforms that violate host-physical-address ==
     system-physical address assumptions

   - Defer CXL CPER notification handling to v6.9"

* tag 'cxl-fixes-6.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
  cxl/acpi: Fix load failures due to single window creation failure
  acpi/ghes: Remove CXL CPER notifications
  cxl/pci: Fix disabling memory if DVSEC CXL Range does not match a CFMWS window
  cxl/test: Add support for qos_class checking
  cxl: Fix sysfs export of qos_class for memdev
  cxl: Remove unnecessary type cast in cxl_qos_class_verify()
  cxl: Change 'struct cxl_memdev_state' *_perf_list to single 'struct cxl_dpa_perf'
  cxl/region: Allow out of order assembly of autodiscovered regions
  cxl/region: Handle endpoint decoders in cxl_region_find_decoder()
  x86/numa: Fix the sort compare func used in numa_fill_memblks()
  x86/numa: Fix the address overlap check in numa_fill_memblks()
  cxl/pci: Skip to handle RAS errors if CXL.mem device is detached

Merge tag 'for-6.8/dm-fix-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper fix from Mike Snitzer:

 - Fix DM integrity and verity targets to not use excessive stack when
   they recheck in the error path.

* tag 'for-6.8/dm-fix-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm-integrity, dm-verity: reduce stack usage for recheck

Pull SCSI fixes from James Bottomley:
 "Six fixes: the four driver ones are pretty trivial.

  The larger two core changes are to try to fix various USB attached
  devices which have somewhat eccentric ways of handling the VPD and
  other mode pages which necessitate multiple revalidates (that were
  removed in the interests of efficiency) and updating the heuristic for
  supported VPD pages"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: jazz_esp: Only build if SCSI core is builtin
  scsi: smartpqi: Fix disable_managed_interrupts
  scsi: ufs: Uninitialized variable in ufshcd_devfreq_target()
  scsi: target: pscsi: Fix bio_put() for error case
  scsi: core: Consult supported VPD page list prior to fetching page
  scsi: sd: usb_storage: uas: Access media prior to querying device properties

Pull i2c fix from Wolfram Sang:
 "A bugfix for host drivers"

* tag 'i2c-for-6.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: imx: when being a target, mark the last read as processed

Merge tag 'loongarch-fixes-6.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch fixes from Huacai Chen:
 "Fix two cpu-hotplug issues, fix the init sequence about FDT system,
  fix the coding style of dts, and fix the wrong CPUCFG ID handling of
  KVM"

* tag 'loongarch-fixes-6.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
  LoongArch: KVM: Streamline kvm_check_cpucfg() and improve comments
  LoongArch: KVM: Rename _kvm_get_cpucfg() to _kvm_get_cpucfg_mask()
  LoongArch: KVM: Fix input validation of _kvm_get_cpucfg() & kvm_check_cpucfg()
  LoongArch: dts: Minor whitespace cleanup
  LoongArch: Call early_init_fdt_scan_reserved_mem() earlier
  LoongArch: Update cpu_sibling_map when disabling nonboot CPUs
  LoongArch: Disable IRQ before init_fn() for nonboot CPUs

The newly added integrity_recheck() function has another larger stack
allocation, just like its caller integrity_metadata(). When it gets
inlined, the combination of the two exceeds the warning limit for 32-bit
architectures and possibly risks an overflow when this is called from
a deep call chain through a file system:

drivers/md/dm-integrity.c:1767:13: error: stack frame size (1048) exceeds limit (1024) in 'integrity_metadata' [-Werror,-Wframe-larger-than]
 1767 | static void integrity_metadata(struct work_struct *w)

Since the caller at this point is done using its checksum buffer,
just reuse the same buffer in the new function to avoid the double
allocation.

[Mikulas: add "noinline" to integrity_recheck and verity_recheck.
These functions are only called on error, so they shouldn't bloat the
stack frame or code size of the caller.]

Fixes: c88f5e55 ("dm-integrity: recheck the integrity tag after a failure")
Fixes: 9177f3c0 ("dm-verity: recheck the hash after a failure")
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

When being a target, NAK from the controller means that all bytes have
been transferred. So, the last byte needs also to be marked as
'processed'. Otherwise index registers of backends may not increase.

Fixes: f7414cd6 ("i2c: imx: support slave mode for imx I2C driver")
Signed-off-by: Corey Minyard <minyard@acm.org>
Tested-by: Andrew Manley <andrew.manley@sealingtech.com>
Reviewed-by: Andrew Manley <andrew.manley@sealingtech.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
[wsa: fixed comment and commit message to properly describe the case]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>

Pull parisc architecture fixes from Helge Deller:
 "Fixes CPU hotplug, the parisc stack unwinder and two possible build
  errors in kprobes and ftrace area:

   - Fix CPU hotplug

   - Fix unaligned accesses and faults in stack unwinder

   - Fix potential build errors by always including asm-generic/kprobes.h

   - Fix build bug by add missing CONFIG_DYNAMIC_FTRACE check"

* tag 'parisc-for-6.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Fix stack unwinder
  parisc/kprobes: always include asm-generic/kprobes.h
  parisc/ftrace: add missing CONFIG_DYNAMIC_FTRACE check
  Revert "parisc: Only list existing CPUs in cpu_possible_mask"

Pull arm and RISC-V SoC fixes from Arnd Bergmann:
 "The Rockchip and IMX8 platforms get a number of fixes for dts files in
  order to address some misconfigurations, including a regression for
  USB-C support on some boards.

  The other dts fixes are part of a series by Rob Herring to clean up
  another class of dtc compiler warnings across all platforms, with a
  few others helping out as well. With this, we can enable the warning
  for the coming merge window without introducing regressions.

  Conor Dooley has collected fixes for RISC-V platforms, both for the
  dts files and for platofrm specific drivers.

  The ep93xx platform gets a regression for for its gpio descriptors"

* tag 'arm-fixes-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (28 commits)
  ARM: dts: renesas: rcar-gen2: Add missing #interrupt-cells to DA9063 nodes
  cache: ax45mp_cache: Align end size to cache boundary in ax45mp_dma_cache_wback()
  arm64: dts: qcom: Fix interrupt-map cell sizes
  arm: dts: Fix dtc interrupt_map warnings
  arm64: dts: Fix dtc interrupt_provider warnings
  arm: dts: Fix dtc interrupt_provider warnings
  arm64: dts: freescale: Disable interrupt_map check
  ARM: ep93xx: Add terminator to gpiod_lookup_table
  riscv: dts: sifive: add missing #interrupt-cells to pmic
  arm64: dts: rockchip: Correct Indiedroid Nova GPIO Names
  arm64: dts: rockchip: Drop interrupts property from rk3328 pwm-rockchip node
  arm64: dts: rockchip: set num-cs property for spi on px30
  arm64: dts: rockchip: minor rk3588 whitespace cleanup
  riscv: dts: starfive: replace underscores in node names
  bus: imx-weim: fix valid range check
  Revert "arm64: dts: imx8mn-var-som-symphony: Describe the USB-C connector"
  Revert "arm64: dts: imx8mp-dhcom-pdk3: Describe the USB-C connector"
  arm64: dts: tqma8mpql: fix audio codec iov-supply
  arm64: dts: rockchip: drop unneeded status from rk3588-jaguar gpio-leds
  ARM: dts: rockchip: Drop interrupts property from pwm-rockchip nodes
  ...

Pull arm64 fixes from Will Deacon:
 "A simple fix to a definition in the CXL PMU driver, a couple of
  patches to restore SME control registers on the resume path (since
  Arm's fast model now clears them) and a revert for our jump label asm
  constraints after Geert noticed they broke the build with GCC 5.5.

  There was then the ensuing discussion about raising the minimum GCC
  (and corresponding binutils) versions at [1], but for now we'll keep
  things working as they were until that goes ahead.

   - Revert fix to jump label asm constraints, as it regresses the build
     with some GCC 5.5 toolchains.

   - Restore SME control registers when resuming from suspend

   - Fix incorrect filter definition in CXL PMU driver"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64/sme: Restore SMCR_EL1.EZT0 on exit from suspend
  arm64/sme: Restore SME registers on exit from suspend
  Revert "arm64: jump_label: use constraints "Si" instead of "i""
  perf: CXL: fix CPMU filter value mask length

Pull s390 fixes from Heiko Carstens:

 - Fix invalid -EBUSY on ccw_device_start() which can lead to failing
   device initialization

 - Add missing multiplication by 8 in __iowrite64_copy() to get the
   correct byte length before calling zpci_memcpy_toio()

 - Various config updates

* tag 's390-6.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/cio: fix invalid -EBUSY on ccw_device_start
  s390: use the correct count for __iowrite64_copy()
  s390/configs: update default configurations
  s390/configs: enable INIT_STACK_ALL_ZERO in all configurations
  s390/configs: provide compat topic configuration target

Merge tag 'mm-hotfixes-stable-2024-02-22-15-02' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull misc fixes from Andrew Morton:
 "A batch of MM (and one non-MM) hotfixes.

  Ten are cc:stable and the remainder address post-6.7 issues or aren't
  considered appropriate for backporting"

* tag 'mm-hotfixes-stable-2024-02-22-15-02' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  kasan: guard release_free_meta() shadow access with kasan_arch_is_ready()
  mm/damon/lru_sort: fix quota status loss due to online tunings
  mm/damon/reclaim: fix quota stauts loss due to online tunings
  MAINTAINERS: mailmap: update Shakeel's email address
  mm/damon/sysfs-schemes: handle schemes sysfs dir removal before commit_schemes_quota_goals
  mm: memcontrol: clarify swapaccount=0 deprecation warning
  mm/memblock: add MEMBLOCK_RSRV_NOINIT into flagname[] array
  mm/zswap: invalidate duplicate entry when !zswap_enabled
  lib/Kconfig.debug: TEST_IOV_ITER depends on MMU
  mm/swap: fix race when skipping swapcache
  mm/swap_state: update zswap LRU's protection range with the folio locked
  selftests/mm: uffd-unit-test check if huge page size is 0
  mm/damon/core: check apply interval in damon_do_apply_schemes()
  mm: zswap: fix missing folio cleanup in writeback race path

Merge tag 'for-6.8/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

 - Stable fixes for 3 DM targets (integrity, verity and crypt) to
   address systemic failure that can occur if user provided pages map to
   the same block.

 - Fix DM crypt to not allow modifying data that being encrypted for
   authenticated encryption.

 - Fix DM crypt and verity targets to align their respective bvec_iter
   struct members to avoid the need for byte level access (due to
   __packed attribute) that is costly on some arches (like RISC).

* tag 'for-6.8/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm-crypt, dm-integrity, dm-verity: bump target version
  dm-verity, dm-crypt: align "struct bvec_iter" correctly
  dm-crypt: recheck the integrity tag after a failure
  dm-crypt: don't modify the data when using authenticated encryption
  dm-verity: recheck the hash after a failure
  dm-integrity: recheck the integrity tag after a failure

Pull drm fixes from Dave Airlie:
 "This is the weekly drm fixes. Non-drivers there is a fbdev/sparc fix,
  syncobj, ttm and buddy fixes.

  On the driver side, ivpu, meson, i915 have a small fix each. Then
  amdgpu and xe have a bunch. Nouveau has some minor uapi additions to
  give userspace some useful info along with a Kconfig change to allow
  the new GSP firmware paths to be used by default on the GPUs it
  supports.

  Seems about the usual amount for this time of release cycle.

  fbdev:
   - fix sparc undefined reference

  syncobj:
   - fix sync obj fence waiting
   - handle NULL fence in syncobj eventfd code

  ttm:
   - fix invalid free

  buddy:
   - fix list handling
   - fix 32-bit build

  meson:
   - don't remove bridges from other drivers

  nouveau:
   - fix build warnings
   - add two minor info parameters
   - add a Kconfig to allow GSP by default on some GPUs

  ivpu:
   - allow fw to do initial tile config

  i915:
   - fix TV mode

  amdgpu:
   - Suspend/resume fixes
   - Backlight error fix
   - DCN 3.5 fixes
   - Misc fixes

  xe:
   - Remove support for persistent exec_queues
   - Drop a reduntant sysfs newline printout
   - A three-patch fix for a VM_BIND rebind optimization path
   - Fix a modpost warning on an xe KUNIT module"

* tag 'drm-fixes-2024-02-23' of git://anongit.freedesktop.org/drm/drm: (27 commits)
  nouveau: add an ioctl to report vram usage
  nouveau: add an ioctl to return vram bar size.
  nouveau/gsp: add kconfig option to enable GSP paths by default
  drm/amdgpu: Fix the runtime resume failure issue
  drm/amd/display: fix null-pointer dereference on edid reading
  drm/amd/display: Fix memory leak in dm_sw_fini()
  drm/amd/display: fix input states translation error for dcn35 & dcn351
  drm/amd/display: Fix potential null pointer dereference in dc_dmub_srv
  drm/amd/display: Only allow dig mapping to pwrseq in new asic
  drm/amd/display: adjust few initialization order in dm
  drm/syncobj: handle NULL fence in syncobj_eventfd_entry_func
  drm/syncobj: call drm_syncobj_fence_add_wait when WAIT_AVAILABLE flag is set
  drm/ttm: Fix an invalid freeing on already freed page in error path
  sparc: Fix undefined reference to fb_is_primary_device
  drm/xe: Fix modpost warning on xe_mocs kunit module
  drm/xe/xe_gt_idle: Drop redundant newline in name
  drm/xe: Return 2MB page size for compact 64k PTEs
  drm/xe: Add XE_VMA_PTE_64K VMA flag
  drm/xe: Fix xe_vma_set_pte_size
  drm/xe/uapi: Remove support for persistent exec_queues
  ...

Pull ata fixes from Niklas Cassel:

 - Do not try to set a sleeping device to standby. Sleep is a deeper
   sleep state than standby, and needs a reset to wake up the drive. A
   system resume will reset the port. Sending a command other than reset
   to a sleeping device is not wise, as the command will timeout (Damien
   Le Moal)

 - Do not try to put a device to standby twice during system shutdown.
   ata_dev_power_set_standby() is currently called twice during
   shutdown, once after the scsi device is removed, and another when
   ata_pci_shutdown_one() executes. Modify ata_dev_power_set_standby()
   to do nothing if the device is already in standby (Damien Le Moal)

 - Add a quirk for ASM1064 to fixup the number of implemented ports. We
   probe all ports that the hardware reports to be implemented. Probing
   ports that are not implemented causes significantly increased boot
   time (Andrey Jr. Melnikov)

 - Fix error handling for the ahci_ceva driver. Ensure that the
   ahci_ceva driver does a proper cleanup of its resources in the error
   path (Radhey Shyam Pandey)

* tag 'ata-6.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
  ata: libata-core: Do not call ata_dev_power_set_standby() twice
  ata: ahci_ceva: fix error handling for Xilinx GT PHY support
  ahci: asm1064: correct count of reported ports
  ata: libata-core: Do not try to set sleeping devices to standby

Pull gpio fix from Bartosz Golaszewski:

 - fix a use-case where no pins are mapped to GPIOs in
   gpiochip_generic_config()

* tag 'gpio-fixes-for-v6.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpiolib: Handle no pin_ranges in gpiochip_generic_config()

Merge tag 'hwmon-for-v6.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fix from Guenter Roeck:
 "Fix a global-out-of-bounds bug in nct6775 driver"

* tag 'hwmon-for-v6.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (nct6775) Fix access to temperature configuration registers

Prior to commit 092edadd ("iommu: Support mm PASID 1:n with sva
domains") the code allowed a SVA handle to be bound multiple times to the
same (mm, device) pair. This was alluded to in the kdoc comment, but we
had understood this to be more a remark about allowing multiple devices,
not a literal same-driver re-opening the same SVA.

It turns out uacce and idxd were both relying on the core code to handle
reference counting for same-device same-mm scenarios. As this looks hard
to resolve in the drivers bring it back to the core code.

The new design has changed the meaning of the domain->users refcount to
refer to the number of devices that are sharing that domain for the same
mm. This is part of the design to lift the SVA domain de-duplication out
of the drivers.

Return the old behavior by explicitly de-duplicating the struct iommu_sva
handle. The same (mm, device) will return the same handle pointer and the
core code will handle tracking this. The last unbind of the handle will
destroy it.

Fixes: 092edadd ("iommu: Support mm PASID 1:n with sva domains")
Reported-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Closes: https://lore.kernel.org/all/20240221110658.529-1-zhangfei.gao@linaro.org/Tested-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/0-v1-9455fc497a6f+3b4-iommu_sva_sharing_jgg@nvidia.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

Merge tag 'arm-smmu-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into iommu/fixes

Arm SMMU fixes for 6.8

- Fix CD allocation from atomic context when using SVA with SMMUv3

- Revert the conversion of SMMUv2 to domain_alloc_paging(), as it
  breaks the boot for Qualcomm MSM8996 devices

Merge tag 'renesas-fixes-for-v6.8-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/fixes

Renesas fixes for v6.8

  - Add missing #interrupt-cells to DA9063 nodes.

* tag 'renesas-fixes-for-v6.8-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
  ARM: dts: renesas: rcar-gen2: Add missing #interrupt-cells to DA9063 nodes

Link: https://lore.kernel.org/r/cover.1708597150.git.geert+renesas@glider.beSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'riscv-dt-fixes-for-v6.8-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into arm/fixes

RISC-V Devicetree fixes for v6.8-rc6

Two fixes for W=2 issues in devicetrees, which should constitute fixes
for all reasonable-to-fix W=2 problems on RISC-V. The others are caused
by standard USB and MMC property names containing underscores that are
not likely to ever change.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>

* tag 'riscv-dt-fixes-for-v6.8-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
  riscv: dts: sifive: add missing #interrupt-cells to pmic
  riscv: dts: starfive: replace underscores in node names

Link: https://lore.kernel.org/r/20240221-foil-glade-09dbf1aa3fe2@spudSigned-off-by: Arnd Bergmann <arnd@arndb.de>