- 05 Jun, 2012 40 commits
-
-
Gustavo Padovan authored
Most of the include were unnecessary or already included by some other header. Replace module.h by export.h where possible. Signed-off-by:
Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org>
-
Gustavo Padovan authored
This is some leftover from the last patches that fixed style. It is mostly line over 80 characters fixes reported by checkpatch.pl. checkpatch.pl is clean for these files now. Signed-off-by:
-
Gustavo Padovan authored
Fix all warning and errors reported by checkpatch but license trailing whitespace and bdaddr_t definition. Signed-off-by:
-
Gustavo Padovan authored
Let the compiler chooses what is best. Signed-off-by:
-
Gustavo Padovan authored
Only obvious cases were left as inline, mostly oneline functions. Signed-off-by:
-
Andrei Emeltchenko authored
Signed-off-by:
Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by:
-
Andrei Emeltchenko authored
Previous callers of l2cap_build_conf_rsp in l2cap_config_req use flags instead of continuation flag hardcoded value. It does not change logic and preserve future possible flags. Signed-off-by:
-
Andrei Emeltchenko authored
Remove magic number with defined link key size. Signed-off-by:
-
Szymon Janc authored
HCI_QUIRK_NO_RESET name is misleading - purpose of this quirk is to reset device on close instead of init, not to not reset at all. Rename it to HCI_QUIRK_RESET_ON_CLOSE to avoid confusion. Signed-off-by:
Szymon Janc <szymon.janc@tieto.com> Signed-off-by:
-
Gustavo Padovan authored
As reported by checkpatch.pl Signed-off-by:
-
Gustavo Padovan authored
These functions were returning always 0, we just make then void. Signed-off-by:
Mat Martineau <mathewm@codeaurora.org> Signed-off-by:
-
Gustavo Padovan authored
The same check is done just before call l2cap_streaming_send() Signed-off-by:
-
Andrei Emeltchenko authored
Silence warnings below: net/bluetooth/l2cap_core.c:1662:24: warning: Using plain integer as NULL pointer net/bluetooth/l2cap_core.c:1662:27: warning: Using plain integer as NULL pointer net/bluetooth/l2cap_core.c:1683:24: warning: Using plain integer as NULL pointer net/bluetooth/l2cap_core.c:1683:27: warning: Using plain integer as NULL pointer net/bluetooth/l2cap_core.c:2260:46: warning: Using plain integer as NULL pointer net/bluetooth/l2cap_core.c:2574:33: warning: Using plain integer as NULL pointer net/bluetooth/l2cap_core.c:2581:33: warning: Using plain integer as NULL pointer net/bluetooth/l2cap_core.c:4556:24: warning: Using plain integer as NULL pointer net/bluetooth/l2cap_core.c:4556:27: warning: Using plain integer as NULL pointer Signed-off-by:
-
Gustavo Padovan authored
chan->tx_q is only initialized if we use ERTM or Streaming mode. Signed-off-by:
-
Mat Martineau authored
This enables the new receive and transmit state machines. Signed-off-by:
-
Mat Martineau authored
Now that l2cap_ctrl is used to set up control fields, these macros are not needed. Signed-off-by:
-
Mat Martineau authored
The transmit window values must be configured for streaming mode, even though streaming mode does not have a window. This enables use of extended headers when the transmit window socket option is set to 64 or larger. Signed-off-by:
-
Mat Martineau authored
Let the compiler decide if inlining is appropriate. Signed-off-by:
-
Mat Martineau authored
Since l2cap_send_ack can trigger extra actions like sending iframes, don't call it. Just send an RR or RNR frame if an ack needs sending. Signed-off-by:
-
Mat Martineau authored
Different states have different actions for retransmit and monitor timeouts, so remove the logic for those actions from the timer handlers. Signed-off-by:
-
Mat Martineau authored
The ERTM specification requires the retransmit timer to be cancelled when the monitor timer is set. The retransmit timer cannot be set again while the monitor timer is pending. Signed-off-by:
-
Mat Martineau authored
struct l2cap_ctrl is now used, and the sframe is now sent directly rather than depending on a separate call. Signed-off-by:
-
Mat Martineau authored
REJ frames are sent by the remote device to request that all frames after a given sequence number be retransmitted. These are also an implicit indication that the remote device is not in a busy state and can receive new iframes. Signed-off-by:
-
Mat Martineau authored
When a remote device sends an SREJ, retransmit the frame with the corresponding sequence number (subject to special cases with poll and final flags). An SREJ is also an implicit indication the the remote device is not in a busy state. Signed-off-by:
-
Mat Martineau authored
As retransmitted packets arrive, attempt to reassemble SDUs. If all requested retransmissions have been received, acknowledge them and transition back to the RECV state. Signed-off-by:
-
Mat Martineau authored
The ERTM specification lays out three scenarios for sending SREJ frames to request retransmission of specific frames. l2cap_send_srej requests all frames up to a given txseq that are not already queued for reassembly. l2cap_send_srej_tail only requests the most recent missing frame. l2cap_send_srej_list resends SREJ frames for data that was requested for resend but never received. Signed-off-by:
-
Mat Martineau authored
This adds l2cap_ertm_resend to retransmit frames based on the sequence numbers in chan->retrans_list. If the retransmit limit is reached for any individual frame is reached, the connection is dropped. skbs that are cloned already are copied to avoid modifying shared data (this is uncommon). To retransmit all frames, l2cap_retransmit_all now builds a list of all unacked sequence numbers and then calls l2cap_ertm_resend. Signed-off-by:
-
Mat Martineau authored
This adds a top-level state machine with handlers for two receive states defined in the ERTM spec, RECV and SREJ_SENT. The reqseq value of the incoming frame is also validated at the top level and a disconnection is forced if it is invalid. The actions for the RECV and SREJ_SENT states are implemented according to the state tables in the ERTM specification. Signed-off-by:
-
Mat Martineau authored
This action now exactly matches what is defined in the ERTM specification, including clearing the remote busy flag and setting the retransmit timer rather than retransmitting frames directly. The spec does not retransmit frames as part of this action, since retransmission is only triggered by REJ, SREJ, or an RR with the final bit set. struct l2cap_ctrl is also used to set up header values. Signed-off-by:
-
Mat Martineau authored
This lets the transmit state machine handle local busy state changes, since different actions are taken in the different transmit states. Signed-off-by:
-
Mat Martineau authored
The function now encapsulates more of the logic to either immediately send an ack if the transmit window is over 75% full, or wait for the ack timer to expire if the transmit window is not full enough. It is also able to push out waiting iframes that can carry an acknowledgement. Signed-off-by:
-
Mat Martineau authored
This deletes the receive code that had handlers for each frame type at the top level, and then had logic to determine the receive state within each handler. Signed-off-by:
-
Mat Martineau authored
Streaming mode reception is fairly simple, with in-sequence frames being reassembled as they arrive. Out-of-sequence frames are dropped, and also clear any partially-assembled SDUs that may exist. The packet classifier determines if the txseq value of the incoming packet is expected, invalid (resulting in a disconnection), invalid (ignorable), duplicate, or having to do with an SREJ request that was previously sent. The rules for each classification are defined in the ERTM specification, and consolidating these rules in one place helps clarify the receive state machine. Signed-off-by:
-
Mat Martineau authored
Creates a new l2cap_data_rcv function that combines previous code from l2cap_ertm_data_rcv and l2cap_data_channel. This reduces duplicate code for streaming mode, and sets up a framework for the ERTM receive state machine. Signed-off-by:
-
Mat Martineau authored
The new implementation uses struct l2cap_ctrl to set up the sframe fields, and also reduces duplicate acks by canceling the ack timer whenever an RR or RNR frame is sent. sframe PDU generation is also split in to a separate function to separate it from the logic related to the connection state and sframe type. Signed-off-by:
-
Mat Martineau authored
The new implementation is aware of the new transmit state machine, and uses struct l2cap_ctrl to compose ERTM headers. It also has improved error handling for allocation failures, and does not send the packet until after all skb and channel data structures are updated. Signed-off-by:
-
Mat Martineau authored
This new implementation uses struct l2cap_ctrl to compose the streaming mode headers. Signed-off-by:
-
Mat Martineau authored
This implements a top-level transmit state machine with handlers for the two ERTM states defined in the specification: XMIT and WAIT_F. The state machine accepts an event and, optionally, a list of skbs to transmit. In addition to data transmission, the local busy state can be modified, acks are processed, and monitor and retransmit timeouts are handled. This mirrors the structure of the state tables in the spec. Signed-off-by:
-
Mat Martineau authored
This is to allow for ERTM state machine replacement in the patches that follow. Signed-off-by:
-
Mat Martineau authored
This fixes a regression from commit 2ead70b8 that is present in all kernels starting at v3.0. When L2CAP information was moved to struct l2cap_chan, a check was added to l2cap_chan_del to avoid certain cleanup operations when ERTM or streaming mode had not yet been initialized. The logic in the check did not take in to account that chan->conf_state is set to 0 in l2cap_chan_ready, so l2cap_chan_del failed to cancel timers and leaked memory any time the ERTM queues or lists were not empty. This change makes sure that l2cap_chan_del only returns early if ERTM initialization was not performed. Signed-off-by:
-
