- 10 Feb, 2017 40 commits
-
-
Russell King authored
drivers/net/usb/lan78xx.c:394:33: sparse: expected ; at end of declaration drivers/net/usb/lan78xx.c:394:33: sparse: Expected } at end of struct-union-enum-specifier drivers/net/usb/lan78xx.c:394:33: sparse: got interface drivers/net/usb/lan78xx.c:403:1: sparse: Expected ; at the end of type declaration drivers/net/usb/lan78xx.c:403:1: sparse: got } Add linux/phy.h to lan78xx.c Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Russell King authored
drivers/net/ethernet/cadence/macb.h:862:33: sparse: expected ; at end of declaration drivers/net/ethernet/cadence/macb.h:862:33: sparse: Expected } at end of struct-union-enum-specifier drivers/net/ethernet/cadence/macb.h:862:33: sparse: got phy_interface drivers/net/ethernet/cadence/macb.h:877:1: sparse: Expected ; at the end of type declaration drivers/net/ethernet/cadence/macb.h:877:1: sparse: got } In file included from drivers/net/ethernet/cadence/macb_pci.c:29:0: drivers/net/ethernet/cadence/macb.h:862:2: error: unknown type name 'phy_interface_t' phy_interface_t phy_interface; ^~~~~~~~~~~~~~~ Add linux/phy.h to macb.h Signed-off-by:Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
-
Russell King authored
net/core/netprio_cgroup.c:303:16: error: expected declaration specifiers or '...' before string constant MODULE_LICENSE("GPL v2"); ^~~~~~~~ Add linux/module.h to fix this. Signed-off-by: -
Russell King authored
Removing linux/phy.h from net/dsa.h reveals a build error in the sunrpc code: net/sunrpc/xprtrdma/svc_rdma_backchannel.c: In function 'xprt_rdma_bc_put': net/sunrpc/xprtrdma/svc_rdma_backchannel.c:277:2: error: implicit declaration of function 'module_put' [-Werror=implicit-function-declaration] net/sunrpc/xprtrdma/svc_rdma_backchannel.c: In function 'xprt_setup_rdma_bc': net/sunrpc/xprtrdma/svc_rdma_backchannel.c:348:7: error: implicit declaration of function 'try_module_get' [-Werror=implicit-function-declaration] Fix this by adding linux/module.h to svc_rdma_backchannel.c Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
David S. Miller authored
Merge tag 'wireless-drivers-next-for-davem-2017-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.11 Mostly smaller changeds and fixes all over, nothing really major standing out. Major changes: iwlwifi * work on support for new A000 devices continues * fix 802.11w, which was failing to due an IGTK bug ath10k * add debugfs file peer_debug_trigger for debugging firmware ==================== Signed-off-by:
-
Jiri Pirko authored
HW does not understand ETH_P_ALL. So treat this special case differently and translate to 0/0 key/mask. That will allow HW to match all ethertypes. Fixes: 7aa0f5aa ("mlxsw: spectrum: Implement TC flower offload") Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Reviewed-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
David S. Miller authored
Tobin C. Harding says: ==================== Whitespace checkpatch fixes This patch set fixes various whitespace checkpatch errors and warnings. ==================== Signed-off-by: -
tcharding authored
This patch fixes multiple occurrences of checkpatch WARNING: Missing a blank line after declarations. Signed-off-by:
Tobin C. Harding <me@tobin.cc> Signed-off-by:
-
tcharding authored
Fix multiple occurrences of checkpatch warning. WARNING: Block comments use * on subsequent lines. Also make comment blocks more uniform. Signed-off-by:
-
tcharding authored
This patch fixes two trivial whitespace errors. Brace should be on the previous line and trailing statements should be on next line. Signed-off-by:
-
tcharding authored
This patch fixes multiple occurrences of space before tabs warnings. More lines of code were moved than required to keep kernel-doc comments uniform. Signed-off-by:
-
David S. Miller authored
Amir Vadai says: ==================== net/sched: act_pedit: Use offset relative to conventional network headers Some FW/HW parser APIs are such that they need to get the specific header type (e.g IPV4 or IPV6, TCP or UDP) and not only the networking level (e.g network or transport). Enhancing the UAPI to allow for specifying that, would allow the same flows to be set into both SW and HW. This patchset also makes pedit more robust. Currently fields offset is specified by offset relative to the ip header, while using negative offsets for MAC layer fields. This series enables the user to set offset relative to the relevant header. Usage example: $ tc filter add dev enp0s9 protocol ip parent ffff: \ flower \ ip_proto tcp \ dst_port 80 \ action \ pedit munge ip ttl add 0xff \ pedit munge tcp dport set 8080 \ pipe action mirred egress redirect dev veth0 Will forward traffic destined to tcp dport 80, while modifying the destination port to 8080, and decreasing the ttl by one. I've uploaded a draft for the userspace [2] to make it easier to review and test the patchset. [1] - http://patchwork.ozlabs.org/patch/700909/ [2] - git: https://bitbucket.org/av42/iproute2.git branch: pedit Patchset was tested and applied on top of upstream commit bd092ad1 ("Merge branch 'remove-__napi_complete_done'") Thanks, Amir Changes since V2: - Instead of reusing unused bits in existing uapi fields, using new netlink attributes for the new information. This way new/old user space and new/old kernel can live together without having misunderstandings. Changes since V1: - No changes - V1 was sent and didn't make it for 4.10. - You asked me [1] why did I use specific header names instead of layers (L2, L3...), and I explained that it is on purpose, this extra information is planned to be used by hardware drivers to offload the action. ==================== Signed-off-by: -
Amir Vadai authored
This command could be useful to inc/dec fields. For example, to forward any TCP packet and decrease its TTL: $ tc filter add dev enp0s9 protocol ip parent ffff: \ flower ip_proto tcp \ action pedit munge ip ttl add 0xff pipe \ action mirred egress redirect dev veth0 In the example above, adding 0xff to this u8 field is actually decreasing it by one, since the operation is masked. Signed-off-by:Amir Vadai <amir@vadai.me> Reviewed-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
-
Amir Vadai authored
Extend pedit to enable the user setting offset relative to network headers. This change would enable to work with more complex header schemes (vs the simple IPv4 case) where setting a fixed offset relative to the network header is not enough. After this patch, the action has information about the exact header type and field inside this header. This information could be used later on for hardware offloading of pedit. Backward compatibility was being kept: 1. Old kernel <-> new userspace 2. New kernel <-> old userspace 3. add rule using new userspace <-> dump using old userspace 4. add rule using old userspace <-> dump using new userspace When using the extended api, new netlink attributes are being used. This way, operation will fail in (1) and (3) - and no malformed rule be added or dumped. Of course, new user space that doesn't need the new functionality can use the old netlink attributes and operation will succeed. Since action can support both api's, (2) should work, and it is easy to write the new user space to have (4) work. The action is having a strict check that only header types and commands it can handle are accepted. This way future additions will be much easier. Usage example: $ tc filter add dev enp0s9 protocol ip parent ffff: \ flower \ ip_proto tcp \ dst_port 80 \ action pedit munge tcp dport set 8080 pipe \ action mirred egress redirect dev veth0 Will forward tcp port whose original dest port is 80, while modifying the destination port to 8080. Signed-off-by: -
Amir Vadai authored
Introduce skb_mac_offset() that could be used to get mac header offset. Signed-off-by:
-
David S. Miller authored
Jiri Pirko says: ==================== mlxsw: Offload MC flood for unregister MC Nogah says: When multicast is enabled, the Linux bridge floods unregistered multicast packets only to ports connected to a multicast router. Devices capable of offloading the Linux bridge need to be made aware of such ports, for proper flooding behavior. On the other hand, when multicast is disabled, such packets should be flooded to all ports. This patchset aims to fix that, by offloading the multicast state and the list of multicast router ports. The first 3 patches adds switchdev attributes to offload this data. The rest of the patchset add implementation for handling this data in the mlxsw driver. The effects this data has on the MDB (namely, when the multicast is disabled the MDB should be considered as invalid, and when it is enabled, a packet that is flooded by it should also be flooded to the multicast routers ports) is subject of future work. Testing of this patchset included: Sending 3 mc packets streams, LL, register and unregistered, and checking that they reached only to the ports that should have received them. The configs were: mc disabled, mc without mc router ports and mc with fixed router port. It was checked for vlan aware bridge, vlan unaware bridge and vlan unaware bridge with another vlan unaware bridge on the same machine ==================== Signed-off-by: -
Nogah Frankel authored
Add a function to update mc_disabled from switchdev attr SWITCHDEV_ATTR_ID_BRIDGE_MC_DISABLED Signed-off-by:
Nogah Frankel <nogahf@mellanox.com> Signed-off-by:
Yotam Gigi <yotamg@mellanox.com> Signed-off-by:
-
Nogah Frankel authored
The function mlxsw_sp_port_orig_get returns the vport from the physical port if needed, based on the original device. This patch addresses the case where the original device is a bridge. If it is vlan unaware bridge, it returns the matching vport. If it is vlan aware bridge, there is no matching vport, and it returns the original port. Signed-off-by:
-
Nogah Frankel authored
The decision whether to flood a multicast packet to a port dependent on three flags: mc_disabled, mc_router_port, mc_flood. If mc_disabled is on, the port will be flooded according to mc_flood, otherwise, according to mc_router_port. To accomplish that, add those flags into the mlxsw_sp_port struct and update the mc flood table accordingly. Update mc_router_port by switchdev attribute SWITCHDEV_ATTR_ID_PORT_MC_ROUTER_PORT. Signed-off-by:
-
Nogah Frankel authored
Break the bm (broadcast-multicast) into two tables, one for broadcast (and link local multicast that behaves like bc) and one for unknown multicasts. Add a bool into mlxsw_sp_port named mc_flood that reflect the value this port should have in the mc flood table (currently, always 1); Signed-off-by:
-
Nogah Frankel authored
A user that wants many bridges will use 1.Q bridge which are scalable. One can have as many 1.Q bridges as vfids. This patch sets their number to 1k, which is a reasonably large number. This change is done here because the next patches will add a new flood table, and without it, it will increase the overall size of the flood tables dramatically. Signed-off-by:
-
Nogah Frankel authored
Currently, there is a per port flood update function only for the UC table. Make the function more generic by changing the table type to be an input. Signed-off-by:
-
Nogah Frankel authored
Currently, the flood set function can't operate on only one table, but sets both uc_flood and mb_flood together. This patch creates a function that sets the flood state per table. Signed-off-by:
-
Nogah Frankel authored
Offload the mc router ports list, whenever it is being changed. It is done because in some cases mc packets needs to be flooded to all the ports in this list. Signed-off-by:
Ivan Vecera <ivecera@redhat.com> Signed-off-by:
-
Nogah Frankel authored
There are three places where a port gets deleted from the mc router port list. This patch join the actual deletion to one function. It will be helpful for later patch that will offload changes in the mc router ports list. Signed-off-by:
-
Nogah Frankel authored
Offload multicast disabled flag, for more accurate mc flood behavior: When it is on, the mdb should be ignored. When it is off, unregistered mc packets should be flooded to mc router ports. Signed-off-by:
-
David S. Miller authored
Jiri Pirko says: ==================== sched: cls_api: small cleanup This patchset makes couple of things in cls_api code a bit nicer and easier for reader to digest. ==================== Signed-off-by: -
Jiri Pirko authored
As it is more common, check err for !0. That allows to safe one level of indentation and makes the code easier to read. Also, make 'next' variable global in function as it is used twice. Signed-off-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
Jiri Pirko authored
Curly braces need to be there, for stylistic reasons. Signed-off-by:
-
Jiri Pirko authored
This makes the reader to know right away what is the error value. Signed-off-by:
-
Jiri Pirko authored
Make the long function tc_ctl_tfilter a little bit shorter and easier to read. Also make the creation of filter proto symmetric to destruction. Signed-off-by:
-
Jiri Pirko authored
Creation is done in this file, move destruction to be at the same place. Signed-off-by:
-
Jiri Pirko authored
This function destroys TC filter protocol, not TC filter. So name it accordingly. Signed-off-by:
-
David S. Miller authored
Jiri Pirko says: ==================== mlxsw: Identical routes handling Ido says: The kernel can store several FIB aliases that share the same prefix and length. These aliases can differ in other parameters such as TOS and metric, which are taken into account during lookup. Offloading devices might not have the same flexibility, allowing only a single route with the same prefix and length to be reflected. mlxsw is one such device. This patchset aims to correctly handle this situation in the mlxsw driver. The first four patches introduce small changes in the IPv4 FIB code, so that listeners of the FIB notification chain will be able to correctly handle identical routes. The last three patches build on top of previous work and introduce the necessary changes in the mlxsw driver. The biggest change is the introduction of a FIB node, where identical routes are chained, instead of a primitive reference counting. This is explained in detail in the fifth patch. ==================== Signed-off-by: -
Ido Schimmel authored
Upon the reception of an ENTRY_REPLACE notification, resolve the FIB node corresponding to the prefix and length and insert the new route before the first matching entry. Since the notification also signals the deletion of the replaced route, delete it from the driver's cache. Signed-off-by:
-
Ido Schimmel authored
When a new route is appended, it's placed after existing routes sharing the same parameters (prefix, length, table ID, TOS and priority). While the device supports only one route with the same prefix and length in a single table, it's important to correctly place the appended route in the driver's cache, as when a route is deleted the next one is programmed into the device. Following the reception of an ENTRY_APPEND notification, resolve the FIB node corresponding to the prefix and length and correctly place the new entry in its entry list. Signed-off-by:
-
Ido Schimmel authored
In the device, routes are indexed in a routing table based on the prefix and its length. This is in contrast to the kernel's FIB where several FIB aliases can exist with these parameters being identical. In such cases, the routes will be sorted by table ID (LOCAL first, then MAIN), TOS and finally priority (metric). During lookup, these routes will be evaluated in order. In case the packet's TOS field is non-zero and a FIB alias with a matching TOS is found, then it's selected. Otherwise, the lookup defaults to the route with TOS 0 (if it exists). However, if the requested scope is narrower than the one found, then the lookup continues. To best reflect the kernel's datapath we should take the above into account. Given a prefix and its length, the reflected route will always be the first one in the FIB alias list. However, if the route has a non-zero TOS then its action will be converted to trap instead of forward, since we currently don't support TOS-based routing. If this turns out to be a real issue, we can add support for that using policy-based switching. The route's scope can be effectively ignored as any packet being routed by the device would've been looked-up using the widest scope (UNIVERSE). To achieve that we need to do two changes. Firstly, we need to create another struct (FIB node) that will hold the list of FIB entries sharing the same prefix and length. This struct will be hashed using these two parameters. Secondly, we need to change the route reflection to match the above logic, so that the first FIB entry in the list will be programmed into the device while the rest will remain in the driver's cache in case of subsequent changes. Signed-off-by:
-
Ido Schimmel authored
The FIB notification chain currently uses the NLM_F_{REPLACE,APPEND} flags to signal routes being replaced or appended. Instead of using netlink flags for in-kernel notifications we can simply introduce two new events in the FIB notification chain. This has the added advantage of making the API cleaner, thereby making it clear that these events should be supported by listeners of the notification chain. Signed-off-by: -
Ido Schimmel authored
When a FIB alias is replaced following NLM_F_REPLACE, the ENTRY_ADD notification is sent after the reference on the previous FIB info was dropped. This is problematic as potential listeners might need to access it in their notification blocks. Solve this by sending the notification prior to the deletion of the replaced FIB alias. This is consistent with ENTRY_DEL notifications. Signed-off-by:
-
Ido Schimmel authored
When a FIB alias is removed, a notification is sent using the type passed from user space - can be RTN_UNSPEC - instead of the actual type of the removed alias. This is problematic for listeners of the FIB notification chain, as several FIB aliases can exist with matching parameters, but the type. Solve this by passing the actual type of the removed FIB alias. Signed-off-by:
-
