- 20 Dec, 2018 40 commits
-
-
YueHaibing authored
Use DEFINE_DEBUGFS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTRIBUTE for debugfs files. Semantic patch information: Rationale: DEFINE_SIMPLE_ATTRIBUTE + debugfs_create_file() imposes some significant overhead as compared to DEFINE_DEBUGFS_ATTRIBUTE + debugfs_create_file_unsafe(). Generated by: scripts/coccinelle/api/debugfs/debugfs_simple_attr.cocci Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Acked-by:
Russell Currey <ruscur@russell.cc> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Diana Craciun authored
Signed-off-by:
Diana Craciun <diana.craciun@nxp.com> Signed-off-by:
-
Diana Craciun authored
Report branch predictor state flush as a mitigation for Spectre variant 2. Signed-off-by:
-
Diana Craciun authored
If the user choses not to use the mitigations, replace the code sequence with nops. Signed-off-by:
-
Diana Craciun authored
Switching from the guest to host is another place where the speculative accesses can be exploited. Flush the branch predictor when entering KVM. Signed-off-by:
-
Diana Craciun authored
In order to protect against speculation attacks on indirect branches, the branch predictor is flushed at kernel entry to protect for the following situations: - userspace process attacking another userspace process - userspace process attacking the kernel Basically when the privillege level change (i.e.the kernel is entered), the branch predictor state is flushed. Signed-off-by:
-
Diana Craciun authored
In order to protect against speculation attacks on indirect branches, the branch predictor is flushed at kernel entry to protect for the following situations: - userspace process attacking another userspace process - userspace process attacking the kernel Basically when the privillege level change (i.e. the kernel is entered), the branch predictor state is flushed. Signed-off-by:
-
Diana Craciun authored
When the command line argument is present, the Spectre variant 2 mitigations are disabled. Signed-off-by:
-
Diana Craciun authored
In order to flush the branch predictor the guest kernel performs writes to the BUCSR register which is hypervisor privilleged. However, the branch predictor is flushed at each KVM entry, so the branch predictor has been already flushed, so just return as soon as possible to guest. Signed-off-by:
-
Diana Craciun authored
Currently for CONFIG_PPC_FSL_BOOK3E the spectre_v2 file is incorrect: $ cat /sys/devices/system/cpu/vulnerabilities/spectre_v2 "Mitigation: Software count cache flush" Which is wrong. Fix it to report vulnerable for now. Fixes: ee13cb24 ("powerpc/64s: Add support for software count cache flush") Cc: stable@vger.kernel.org # v4.19+ Signed-off-by:
-
Diana Craciun authored
The BUCSR register can be used to invalidate the entries in the branch prediction mechanisms. Signed-off-by:
-
Diana Craciun authored
In order to protect against speculation attacks (Spectre variant 2) on NXP PowerPC platforms, the branch predictor should be flushed when the privillege level is changed. This patch is adding the infrastructure to fixup at runtime the code sections that are performing the branch predictor flush depending on a boot arg parameter which is added later in a separate patch. Signed-off-by:
-
Christophe Leroy authored
If the device tree doesn't reside in the memory which is declared inside it, it has to be moved as well as this memory will not be mapped by the kernel. Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
-
Michael Ellerman authored
Add some documentation on which CPU versions map to which ISA versions. This is all publicly available information, some of it already in the kernel source, but it's much nicer to have it all in one place. Signed-off-by: -
Michael Ellerman authored
This reverts the remains of commit b9ef7d6b ("powerpc: Update default configurations"). That commit was proceeded by a commit which added a config option to control use of BOOTX for early debug, ie. PPC_EARLY_DEBUG_BOOTX, and then the update of the defconfigs was intended to not change behaviour by then enabling the new config option. However enabling PPC_EARLY_DEBUG had other consequences, notably causing us to register the udbg console at the end of udbg_early_init(). This means on a system which doesn't have anything that BOOTX can use (most systems), we register the udbg console very early but the bootx code just throws everything away, meaning early boot messages are never printed to the console. What we want to happen is for the udbg console to only be registered later (from setup_arch()) once we've setup udbg_putc, and then all early boot messages will be replayed. Fixes: b9ef7d6b ("powerpc: Update default configurations") Reported-by:
Torsten Duwe <duwe@lst.de> Signed-off-by:
-
Arnd Bergmann authored
For this use case, completions and semaphores are equivalent, but semaphores are an awkward interface that should generally be avoided, so use the completion instead. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Greg Kurz authored
The AFU irq code doesn't need to reach out to the platform. Signed-off-by:
Greg Kurz <groug@kaod.org> Acked-by:
Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by:
-
Greg Kurz authored
Implementing rollback with goto and labels is a common practice that leads to prettier and more maintainable code. FWIW, this design pattern is already being used in alloc_link() a few lines below in this file. Do the same in setup_xsl_irq(). Signed-off-by:
Frederic Barrat <fbarrat@linux.ibm.com> Acked-by:
-
Benjamin Herrenschmidt authored
The bamboo dts has a bug: it uses a non-naturally aligned range for PCI memory space. This isnt' supported by the code, thus causing PCI to break on this system. This is due to the fact that while the chip memory map has 1G reserved for PCI memory, it's only 512M aligned. The code doesn't know how to split that into 2 different PMMs and fails, so limit the region to 512M. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Darren Stevens authored
Add a IRQ init routine for the Nemo board which inits and attatches the i8259 found in the SB600, and a cascade routine to dispatch the interrupts. Signed-off-by:
Darren Stevens <darren@stevens-zone.net> Signed-off-by:
-
Darren Stevens authored
Add routines for Nemo specific devices to init at boot time, these being board level power-off and SB600's rtc. Also add a run time variable to prevent these being activated if we boot on a reference board. Signed-off-by:
-
Darren Stevens authored
Add a IRQ init routine for the Nemo board which inits and attatches the i8259 found in the SB600, and a cascade routine to dispatch the interrupts. Signed-off-by:
-
Darren Stevens authored
The A-Eon Amigaone X1000's Nemo motherboard has an AMD SB600 connected to one of the PCI-e root ports on its PaSemi Pwrficient 1628M SoC. Normally the SB600 southbridge would be connected to a hidden PCI-e port on the system's northbridge, and as a result doesn't fully comply with the PCI-e spec. Add code to relax the PCI-e detection in both the root port and the Linux kernel allowing on board devices to be detected. Signed-off-by:
-
Christophe Leroy authored
As several other arches including x86, this patch makes it explicit that a bad page fault is a NULL pointer dereference when the fault address is lower than PAGE_SIZE In the mean time, this page makes all bad_page_fault() messages shorter so that they remain on one single line. And it prefixes them by "BUG: " so that they get easily grepped. Signed-off-by:
-
Dmitry V. Levin authored
Combine the SYSCALL_EMU and SYSCALL_TRACE handling so that we only call tracehook_report_syscall_entry() in one place. Signed-off-by:
Dmitry V. Levin <ldv@altlinux.org> [mpe: Flesh out change log, s/cached_flags/flags/, reflow comments] Signed-off-by:
-
Christoph Hellwig authored
Powerpc has somewhat odd usage where ZONE_DMA is used for all memory on common 64-bit configfs, and ZONE_DMA32 is used for 31-bit schemes. Move to a scheme closer to what other architectures use (and I dare to say the intent of the system): - ZONE_DMA: optionally for memory < 31-bit (64-bit embedded only) - ZONE_NORMAL: everything addressable by the kernel - ZONE_HIGHMEM: memory > 32-bit for 32-bit kernels Also provide information on how ZONE_DMA is used by defining ARCH_ZONE_DMA_BITS. Contains various fixes from Benjamin Herrenschmidt. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Christoph Hellwig authored
The CXL code never even looks at the dma mask, so there is no good reason for this sanity check. Remove it because it gets in the way of the dma ops refactoring. Signed-off-by:
-
Christoph Hellwig authored
The implemementation for the CONFIG_NOT_COHERENT_CACHE case doesn't share any code with the one for systems with coherent caches. Split it off and merge it with the helpers in dma-noncoherent.c that have no other callers. Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by:
-
Christoph Hellwig authored
This function is internal to the DMA API implementation. Instead use the DMA API to properly unmap. Note that the DMA API usage in this driver is a disaster and urgently needs some work - it is missing all the unmaps, seems to do a secondary map where it looks like it should to a unmap in one place to work around cache coherency and the directions passed in seem to be partially wrong. Signed-off-by:
Christian Lamparter <chunkeey@gmail.com> Signed-off-by:
-
Christoph Hellwig authored
The unmap methods need to transfer memory ownership back from the device to the cpu by identical means as dma_sync_*_to_cpu. I'm not sure powerpc needs to do any work in this transfer direction, but given that it does invalidate the caches in dma_sync_*_to_cpu already we should make sure we also do so on unmapping. Signed-off-by:
-
Christoph Hellwig authored
AMIGAONE selects NOT_COHERENT_CACHE, so we better allow it. Signed-off-by:
-
Christophe Leroy authored
This patch fixes early DEBUG messages in prom.c: - Use %px instead of %p to see the addresses - Cast memblock_phys_mem_size() with (unsigned long long) to avoid build failure when phys_addr_t is not 64 bits. Signed-off-by:
-
Greg Kurz authored
All fields in the PE are big-endian. Use cpu_to_be32() like everywhere else something is written to the PE. Otherwise a wrong TID will be used by the NPU. If this TID happens to point to an existing thread sharing the same mm, it could be woken up by error. This is highly improbable though. The likely outcome of this is the NPU not finding the target thread and forcing the AFU into sending an interrupt, which userspace is supposed to handle anyway. Fixes: e948e06f ("ocxl: Expose the thread_id needed for wait on POWER9") Cc: stable@vger.kernel.org # v4.18 Signed-off-by:
-
Joel Stanley authored
When building for ppc32 with clang these flags are unsupported: -ffixed-r2 and -mmultiple llvm's lib/Target/PowerPC/PPCRegisterInfo.cpp marks r2 as reserved on when building for SVR4ABI and !ppc64: // The SVR4 ABI reserves r2 and r13 if (Subtarget.isSVR4ABI()) { // We only reserve r2 if we need to use the TOC pointer. If we have no // explicit uses of the TOC pointer (meaning we're a leaf function with // no constant-pool loads, etc.) and we have no potential uses inside an // inline asm block, then we can treat r2 has an ordinary callee-saved // register. const PPCFunctionInfo *FuncInfo = MF.getInfo<PPCFunctionInfo>(); if (!TM.isPPC64() || FuncInfo->usesTOCBasePtr() || MF.hasInlineAsm()) markSuperRegs(Reserved, PPC::R2); // System-reserved register markSuperRegs(Reserved, PPC::R13); // Small Data Area pointer register } This means we can safely omit -ffixed-r2 when building for 32-bit targets. The -mmultiple/-mno-multiple flags are not supported by clang, so platforms that might support multiple miss out on using multiple word instructions. We wrap these flags in cc-option so that when Clang gains support the kernel will be able use these flags. Clang 8 can then build a ppc44x_defconfig which boots in Qemu: make CC=clang-8 ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu- ppc44x_defconfig ./scripts/config -e CONFIG_DEVTMPFS -d DEVTMPFS_MOUNT make CC=clang-8 ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu- qemu-system-ppc -M bamboo \ -kernel arch/powerpc/boot/zImage \ -dtb arch/powerpc/boot/dts/bamboo.dtb \ -initrd ~/ppc32-440-rootfs.cpio \ -nographic -serial stdio -monitor pty -append "console=ttyS0" Link: https://github.com/ClangBuiltLinux/linux/issues/261 Link: https://bugs.llvm.org/show_bug.cgi?id=39556 Link: https://bugs.llvm.org/show_bug.cgi?id=39555Signed-off-by:Joel Stanley <joel@jms.id.au> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
-
Joel Stanley authored
We cannot build these files with clang as it does not allow altivec instructions in assembly when -msoft-float is passed. Jinsong Ji <jji@us.ibm.com> wrote: > We currently disable Altivec/VSX support when enabling soft-float. So > any usage of vector builtins will break. > > Enable Altivec/VSX with soft-float may need quite some clean up work, so > I guess this is currently a limitation. > > Removing -msoft-float will make it work (and we are lucky that no > floating point instructions will be generated as well). This is a workaround until the issue is resolved in clang. Link: https://bugs.llvm.org/show_bug.cgi?id=31177 Link: https://github.com/ClangBuiltLinux/linux/issues/239Signed-off-by:
-
Madhavan Srinivasan authored
Remove PM_L2_ST_MISS and PM_L2_ST from HW cache event array since these are bus events. And these needs to be programmed in groups. Hence remove them. Fixes: f1fb60bf ('powerpc/perf: Export Power9 generic and cache events to sysfs') Signed-off-by:
Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by:
-
Madhavan Srinivasan authored
In previous generation processors, both bus events and direct events of performance monitoring unit can be individually programmabled and monitored in PMCs. But in Power9, L2/L3 bus events are always available as a "bank" of 4 events. To obtain the counts for any of the l2/l3 bus events in a given bank, the user will have to program PMC4 with corresponding l2/l3 bus event for that bank. Patch enforce two contraints incase of L2/L3 bus events. 1)Any L2/L3 event when programmed is also expected to program corresponding PMC4 event from that group. 2)PMC4 event should always been programmed first due to group constraint logic limitation For ex. consider these L3 bus events PM_L3_PF_ON_CHIP_MEM (0x460A0), PM_L3_PF_MISS_L3 (0x160A0), PM_L3_CO_MEM (0x260A0), PM_L3_PF_ON_CHIP_CACHE (0x360A0), 1) This is an INVALID group for L3 Bus event monitoring, since it is missing PMC4 event. perf stat -e "{r160A0,r260A0,r360A0}" < > And this is a VALID group for L3 Bus events: perf stat -e "{r460A0,r160A0,r260A0,r360A0}" < > 2) This is an INVALID group for L3 Bus event monitoring, since it is missing PMC4 event. perf stat -e "{r260A0,r360A0}" < > And this is a VALID group for L3 Bus events: perf stat -e "{r460A0,r260A0,r360A0}" < > 3) This is an INVALID group for L3 Bus event monitoring, since it is missing PMC4 event. perf stat -e "{r360A0}" < > And this is a VALID group for L3 Bus events: perf stat -e "{r460A0,r360A0}" < > Patch here implements group constraint logic suggested by Michael Ellerman. Signed-off-by:
-
