- 15 Sep, 2017 6 commits
-
-
Eric Dumazet authored
liujian reported a problem in TCP_USER_TIMEOUT processing with a patch in tcp_probe_timer() : https://www.spinics.net/lists/netdev/msg454496.html After investigations, the root cause of the problem is that we update skb->skb_mstamp of skbs in write queue, even if the attempt to send a clone or copy of it failed. One reason being a routing problem. This patch prevents this, solving liujian issue. It also removes a potential RTT miscalculation, since __tcp_retransmit_skb() is not OR-ing TCP_SKB_CB(skb)->sacked with TCPCB_EVER_RETRANS if a failure happens, but skb->skb_mstamp has been changed. A future ACK would then lead to a very small RTT sample and min_rtt would then be lowered to this too small value. Tested: # cat user_timeout.pkt --local_ip=192.168.102.64 0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 +0 `ifconfig tun0 192.168.102.64/16; ip ro add 192.0.2.1 dev tun0` +0 < S 0:0(0) win 0 <mss 1460> +0 > S. 0:0(0) ack 1 <mss 1460> +.1 < . 1:1(0) ack 1 win 65530 +0 accept(3, ..., ...) = 4 +0 setsockopt(4, SOL_TCP, TCP_USER_TIMEOUT, [3000], 4) = 0 +0 write(4, ..., 24) = 24 +0 > P. 1:25(24) ack 1 win 29200 +.1 < . 1:1(0) ack 25 win 65530 //change the ipaddress +1 `ifconfig tun0 192.168.0.10/16` +1 write(4, ..., 24) = 24 +1 write(4, ..., 24) = 24 +1 write(4, ..., 24) = 24 +1 write(4, ..., 24) = 24 +0 `ifconfig tun0 192.168.102.64/16` +0 < . 1:2(1) ack 25 win 65530 +0 `ifconfig tun0 192.168.0.10/16` +3 write(4, ..., 24) = -1 # ./packetdrill user_timeout.pkt Signed-off-by:Eric Dumazet <edumazet@googl.com> Reported-by:
liujian <liujian56@huawei.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Acked-by:
Yuchung Cheng <ycheng@google.com> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David Ahern authored
rt_iif is only set to the actual egress device for the output path. The recent change to consider the l3slave flag when returning IP_PKTINFO works for local traffic (the correct device index is returned), but it broke the more typical use case of packets received from a remote host always returning the VRF index rather than the original ingress device. Update the fixup to consider l3slave and rt_iif actually getting set. Fixes: 1dfa7639 ("net: ipv4: add check for l3slave for index returned in IP_PKTINFO") Signed-off-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Geert Uytterhoeven authored
If the network interface is kept running during suspend, the net core may call net_device_ops.ndo_start_xmit() while the Ethernet device is still suspended, which may lead to a system crash. E.g. on sh73a0/kzm9g and r8a73a4/ape6evm, the external Ethernet chip is driven by a PM controlled clock. If the Ethernet registers are accessed while the clock is not running, the system will crash with an imprecise external abort. As this is a race condition with a small time window, it is not so easy to trigger at will. Using pm_test may increase your chances: # echo 0 > /sys/module/printk/parameters/console_suspend # echo platform > /sys/power/pm_test # echo mem > /sys/power/state To fix this, make sure the network interface is quietened during suspend. Signed-off-by:Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Florian Fainelli authored
We can enter a deadlock situation because there is no sufficient protection when ndo_get_stats64() runs in process context to guard against RX or TX NAPI contexts running in softirq, this can lead to the following lockdep splat and actual deadlock was experienced as well with an iperf session in the background and a while loop doing ifconfig + ethtool. [ 5.780350] ================================ [ 5.784679] WARNING: inconsistent lock state [ 5.789011] 4.13.0-rc7-02179-g32fae27c725d #70 Not tainted [ 5.794561] -------------------------------- [ 5.798890] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. [ 5.804971] swapper/0/0 [HC0[0]:SC1[1]:HE0:SE0] takes: [ 5.810175] (&syncp->seq#2){+.?...}, at: [<c0768a28>] bcm_sysport_tx_reclaim+0x30/0x54 [ 5.818327] {SOFTIRQ-ON-W} state was registered at: [ 5.823278] bcm_sysport_get_stats64+0x17c/0x258 [ 5.828053] dev_get_stats+0x38/0xac [ 5.831776] rtnl_fill_stats+0x30/0x118 [ 5.835761] rtnl_fill_ifinfo+0x538/0xe24 [ 5.839921] rtmsg_ifinfo_build_skb+0x6c/0xd8 [ 5.844430] rtmsg_ifinfo_event.part.5+0x14/0x44 [ 5.849201] rtmsg_ifinfo+0x20/0x28 [ 5.852837] register_netdevice+0x628/0x6b8 [ 5.857171] register_netdev+0x14/0x24 [ 5.861051] bcm_sysport_probe+0x30c/0x438 [ 5.865280] platform_drv_probe+0x50/0xb0 [ 5.869418] driver_probe_device+0x2e8/0x450 [ 5.873817] __driver_attach+0x104/0x120 [ 5.877871] bus_for_each_dev+0x7c/0xc0 [ 5.881834] bus_add_driver+0x1b0/0x270 [ 5.885797] driver_register+0x78/0xf4 [ 5.889675] do_one_initcall+0x54/0x190 [ 5.893646] kernel_init_freeable+0x144/0x1d0 [ 5.898135] kernel_init+0x8/0x110 [ 5.901665] ret_from_fork+0x14/0x2c [ 5.905363] irq event stamp: 24263 [ 5.908804] hardirqs last enabled at (24262): [<c08eecf0>] net_rx_action+0xc4/0x4e4 [ 5.916624] hardirqs last disabled at (24263): [<c0a7da00>] _raw_spin_lock_irqsave+0x1c/0x98 [ 5.925143] softirqs last enabled at (24258): [<c022a7fc>] irq_enter+0x84/0x98 [ 5.932524] softirqs last disabled at (24259): [<c022a918>] irq_exit+0x108/0x16c [ 5.939985] [ 5.939985] other info that might help us debug this: [ 5.946576] Possible unsafe locking scenario: [ 5.946576] [ 5.952556] CPU0 [ 5.955031] ---- [ 5.957506] lock(&syncp->seq#2); [ 5.960955] <Interrupt> [ 5.963604] lock(&syncp->seq#2); [ 5.967227] [ 5.967227] *** DEADLOCK *** [ 5.967227] [ 5.973222] 1 lock held by swapper/0/0: [ 5.977092] #0: (&(&ring->lock)->rlock){..-...}, at: [<c0768a18>] bcm_sysport_tx_reclaim+0x20/0x54 So just remove the u64_stats_update_begin()/end() pair in ndo_get_stats64() since it does not appear to be useful for anything. No inconsistency was observed with either ifconfig or ethtool, global TX counts equal the sum of per-queue TX counts on a 32-bit architecture. Fixes: 10377ba7 ("net: systemport: Support 64bit statistics") Signed-off-by: -
Arnd Bergmann authored
When building an allmodconfig kernel with gcc-4.6, we get a rather odd warning: drivers/net/vrf.c: In function ‘vrf_ip6_input_dst’: drivers/net/vrf.c:964:3: error: initialized field with side-effects overwritten [-Werror] drivers/net/vrf.c:964:3: error: (near initialization for ‘fl6’) [-Werror] I have no idea what this warning is even trying to say, but it does seem like a false positive. Reordering the initialization in to match the structure definition gets rid of the warning, and might also avoid whatever gcc thinks is wrong here. Fixes: 9ff74384 ("net: vrf: Handle ipv6 multicast and link-local addresses") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Himanshu Jha authored
call to memset to assign 0 value immediately after allocating memory with kzalloc is unnecesaary as kzalloc allocates the memory filled with 0 value. Semantic patch used to resolve this issue: @@ expression e,e2; constant c; statement S; @@ e = kzalloc(e2, c); if(e == NULL) S - memset(e, 0, e2); Signed-off-by:
Himanshu Jha <himanshujha199640@gmail.com> Signed-off-by:
Sudarsana Kalluru <sudarsana.kalluru@cavium.com> Signed-off-by:
-
- 14 Sep, 2017 2 commits
-
-
Colin Ian King authored
tnapi is being initialized and then immediately updated and hence the initialiation is redundant. Clean up the warning by moving the declaration and initialization to the inside of the for-loop. Cleans up clang scan-build warning: warning: Value stored to 'tnapi' during its initialization is never read Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Tobias Klauser authored
Make the needlessly global function tls_sw_free_resources static to fix a gcc/sparse warning. Signed-off-by:
Tobias Klauser <tklauser@distanz.ch> Signed-off-by:
-
- 13 Sep, 2017 21 commits
-
-
Dan Carpenter authored
This code causes a static checker warning because Smatch doesn't trust anything that comes from skb->data. I've reviewed this code and I do think skb->data can be controlled by the user here. The sctp_event_subscribe struct has 13 __u8 fields and we want to see if ours is non-zero. sn_type can be any value in the 0-USHRT_MAX range. We're subtracting SCTP_SN_TYPE_BASE which is 1 << 15 so we could read either before the start of the struct or after the end. This is a very old bug and it's surprising that it would go undetected for so long but my theory is that it just doesn't have a big impact so it would be hard to notice. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Sergei Shtylyov authored
When adding myself as a reviewer for the Renesas Ethernet drivers I somehow forgot about the bindings -- I want to review them as well. Fixes: 8e6569af ("MAINTAINERS: add myself as Renesas Ethernet drivers reviewer") Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
Eric Dumazet authored
Denys reported wrong rate estimations with HTB classes. It appears the bug was added in linux-4.10, since my tests where using intervals of one second only. HTB using 4 sec default rate estimators, reported rates were 4x higher. We need to properly scale the bytes/packets samples before integrating them in EWMA. Tested: echo 1 >/sys/module/sch_htb/parameters/htb_rate_est Setup HTB with one class with a rate/cail of 5Gbit Generate traffic on this class tc -s -d cl sh dev eth0 classid 7002:11 class htb 7002:11 parent 7002:1 prio 5 quantum 200000 rate 5Gbit ceil 5Gbit linklayer ethernet burst 80000b/1 mpu 0b cburst 80000b/1 mpu 0b level 0 rate_handle 1 Sent 1488215421648 bytes 982969243 pkt (dropped 0, overlimits 0 requeues 0) rate 5Gbit 412814pps backlog 136260b 2p requeues 0 TCP pkts/rtx 982969327/45 bytes 1488215557414/68130 lended: 22732826 borrowed: 0 giants: 0 tokens: -1684 ctokens: -1684 Fixes: 1c0d32fd ("net_sched: gen_estimator: complete rewrite of rate estimators") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Denys Fedoryshchenko <nuclearcat@nuclearcat.com> Signed-off-by:
-
David S. Miller authored
Jakub Kicinski says: ==================== nfp: wait more carefully for card init The first patch is a small fix for flower offload, we need a whitelist of supported matches, otherwise the unsupported ones will be ignored. The second and the third patch are adding wait/polling to the probe path. We had reports of driver failing probe because it couldn't find the control process (NSP) on the card. Turns out the NSP will only announce its existence after it's fully initialized. Until now we assumed it will be reachable, just not processing commands (hence we wait for a NOOP command to execute successfully). v2: - fix a bad merge which resulted in a build warning and retest. ==================== Signed-off-by: -
Jakub Kicinski authored
The control process (NSP) may take some time to complete its initialization. This is not a problem on most servers, but on very fast-booting machines it may not be ready for operation when driver probes the device. There is also a version of the flash in the wild where NSP tries to train the links as part of init. To wait for NSP initialization we should make sure its resource has already been added to the resource table. NSP adds itself there as last step of init. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
Jakub Kicinski authored
Board state informs us which low-level initialization stages the card has completed. We should wait for the card to be fully initialized before trying to communicate with it, not only before we configure passing traffic. Signed-off-by:
-
Pieter Jansen van Vuuren authored
Previously we did not check the flow dissector against a list of allowed and supported flow key dissectors. This patch introduces such a list and correctly rejects unsupported flow keys. Fixes: 43f84b72 ("nfp: add metadata to each flow offload") Signed-off-by:
Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by:
Simon Horman <simon.horman@netronome.com> Reviewed-by:
-
Jiri Pirko authored
Recent commit d7fb60b9 ("net_sched: get rid of tcfa_rcu") removed freeing in call_rcu, which changed already existing hard-to-hit race condition into 100% hit: [ 598.599825] BUG: unable to handle kernel NULL pointer dereference at 0000000000000030 [ 598.607782] IP: tcf_action_destroy+0xc0/0x140 Or: [ 40.858924] BUG: unable to handle kernel NULL pointer dereference at 0000000000000030 [ 40.862840] IP: tcf_generic_walker+0x534/0x820 Fix this by storing the ops and use them directly for module_put call. Fixes: a85a970a ("net_sched: move tc_action into tcf_common") Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Suresh Reddy authored
IPv6 TSO requests with extension hdrs are a problem to the Lancer and BEx chips. Workaround is to disable TSO6 feature for such packets. Also in Lancer chips, MSS less than 256 was resulting in TX stall. Fix this by disabling GSO when MSS less than 256. Signed-off-by:
Suresh Reddy <suresh.reddy@broadcom.com> Signed-off-by:
-
Arnd Bergmann authored
A randconfig build caused a compile failure: drivers/net/ethernet/nuvoton/w90p910_ether.c: In function 'w90p910_ether_close': drivers/net/ethernet/nuvoton/w90p910_ether.c:580:2: error: implicit declaration of function 'free_irq'; did you mean 'free_uid'? [-Werror=implicit-function-declaration] Adding the correct include fixes the problem. Signed-off-by:
-
Nikolay Aleksandrov authored
Commit 8b426dc5 ("bonding: remove hardcoded value") changed the default value for tlb_dynamic_lb which lead to either broken ALB mode (since tlb_dynamic_lb can be changed only in TLB) or setting TLB mode with tlb_dynamic_lb equal to 0. The first issue was recently fixed by setting tlb_dynamic_lb to 1 always when switching to ALB mode, but the default value is still wrong and we'll enter TLB mode with tlb_dynamic_lb equal to 0 if the mode is changed via netlink or sysfs. In order to restore the previous behaviour and default value simply remove the mode check around the default param initialization for tlb_dynamic_lb which will always set it to 1 as before. Fixes: 8b426dc5 ("bonding: remove hardcoded value") Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by:
Mahesh Bandewar <maheshb@google.com> Signed-off-by:
-
Haishuang Yan authored
In collect_md mode, if the tun dev is down, it still can call __ip6_tnl_rcv to receive on packets, and the rx statistics increase improperly. When the md tunnel is down, it's not neccessary to increase RX drops for the tunnel device, packets would be recieved on fallback tunnel, and the RX drops on fallback device will be increased as expected. Fixes: 8d79266b ("ip6_tunnel: add collect_md mode to IPv6 tunnels") Cc: Alexei Starovoitov <ast@fb.com> Signed-off-by:
Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by:
-
Haishuang Yan authored
In collect_md mode, if the tun dev is down, it still can call ip_tunnel_rcv to receive on packets, and the rx statistics increase improperly. When the md tunnel is down, it's not neccessary to increase RX drops for the tunnel device, packets would be recieved on fallback tunnel, and the RX drops on fallback device will be increased as expected. Fixes: 2e15ea39 ("ip_gre: Add support to collect tunnel metadata.") Cc: Pravin B Shelar <pshelar@nicira.com> Signed-off-by:
Pravin B Shelar <pshelar@ovn.org> Signed-off-by:
-
Yuval Mintz authored
When removing the offloading of mirred actions under matchall classifiers, mlxsw would find the destination port associated with the offloaded action and utilize it for undoing the configuration. Depending on the order by which ports are removed, it's possible that the destination port would get removed before the source port. In such a scenario, when actions would be flushed for the source port mlxsw would perform an illegal dereference as the destination port is no longer listed. Since the only item necessary for undoing the configuration on the destination side is the port-id and that in turn is already maintained by mlxsw on the source-port, simply stop trying to access the destination port and use the port-id directly instead. Fixes: 763b4b70 ("mlxsw: spectrum: Add support in matchall mirror TC offloading") Signed-off-by:
Yuval Mintz <yuvalm@mellanox.com> Signed-off-by:
-
David S. Miller authored
Cong Wang says: ==================== net_sched: fix filter chain reference counting This patchset fixes tc filter chain reference counting and nasty race conditions with RCU callbacks. Please see each patch for details. v3: Rebase on the latest -net Add code comment in patch 1 Improve comment and changelog for patch 2 Add patch 3 v2: Add patch 1 Get rid of more ugly code in patch 2 ==================== Signed-off-by: -
Cong Wang authored
As pointed out by Jiri, there is still a race condition between tcf_block_put() and tcf_chain_destroy() in a RCU callback. There is no way to make it correct without proper locking or synchronization, because both operate on a shared list. Locking is hard, because the only lock we can pick here is a spinlock, however, in tc_dump_tfilter() we iterate this list with a sleeping function called (tcf_chain_dump()), which makes using a lock to protect chain_list almost impossible. Jiri suggested the idea of holding a refcnt before flushing, this works because it guarantees us there would be no parallel tcf_chain_destroy() during the loop, therefore the race condition is gone. But we have to be very careful with proper synchronization with RCU callbacks. Suggested-by:
Cong Wang <xiyou.wangcong@gmail.com> Acked-by:
-
Cong Wang authored
This patch fixes the following ugliness of tc filter chain refcnt: a) tp proto should hold a refcnt to the chain too. This significantly simplifies the logic. b) Chain 0 is no longer special, it is created with refcnt=1 like any other chains. All the ugliness in tcf_chain_put() can be gone! c) No need to handle the flushing oddly, because block still holds chain 0, it can not be released, this guarantees block is the last user. d) The race condition with RCU callbacks is easier to handle with just a rcu_barrier(). Much easier to understand, nothing to hide. Thanks to the previous patch. Please see also the comments in code. e) Make the code understandable by humans, much less error-prone. Fixes: 744a4cf6 ("net: sched: fix use after free when tcf_chain_destroy is called multiple times") Fixes: 5bc17018 ("net: sched: introduce multichain support for filters") Cc: Jiri Pirko <jiri@mellanox.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
Cong Wang authored
gen estimator has been rewritten in commit 1c0d32fd ("net_sched: gen_estimator: complete rewrite of rate estimators"), the caller is no longer needed to wait for a grace period. So this patch gets rid of it. This also completely closes a race condition between action free path and filter chain add/remove path for the following patch. Because otherwise the nested RCU callback can't be caught by rcu_barrier(). Please see also the comments in code. Cc: Jiri Pirko <jiri@mellanox.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Eric Dumazet authored
Back in linux-4.4, I inadvertently put a call to reqsk_put() in inet_child_forget(), forgetting it could be called from two different points. In the case it is called from inet_csk_reqsk_queue_add(), we want to keep the reference on the request socket, since it is released later by the caller (tcp_v{4|6}_rcv()) This bug never showed up because atomic_dec_and_test() was not signaling the underflow, and SLAB_DESTROY_BY RCU semantic for request sockets prevented the request to be put in quarantine. Recent conversion of socket refcount from atomic_t to refcount_t finally exposed the bug. So move the reqsk_put() to inet_csk_listen_stop() to fix this. Thanks to Shankara Pailoor for using syzkaller and providing a nice set of .config and C repro. WARNING: CPU: 2 PID: 4277 at lib/refcount.c:186 refcount_sub_and_test+0x167/0x1b0 lib/refcount.c:186 Kernel panic - not syncing: panic_on_warn set ... CPU: 2 PID: 4277 Comm: syz-executor0 Not tainted 4.13.0-rc7 #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0xf7/0x1aa lib/dump_stack.c:52 panic+0x1ae/0x3a7 kernel/panic.c:180 __warn+0x1c4/0x1d9 kernel/panic.c:541 report_bug+0x211/0x2d0 lib/bug.c:183 fixup_bug+0x40/0x90 arch/x86/kernel/traps.c:190 do_trap_no_signal arch/x86/kernel/traps.c:224 [inline] do_trap+0x260/0x390 arch/x86/kernel/traps.c:273 do_error_trap+0x118/0x340 arch/x86/kernel/traps.c:310 do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:323 invalid_op+0x18/0x20 arch/x86/entry/entry_64.S:846 RIP: 0010:refcount_sub_and_test+0x167/0x1b0 lib/refcount.c:186 RSP: 0018:ffff88006e006b60 EFLAGS: 00010286 RAX: 0000000000000026 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000026 RSI: 1ffff1000dc00d2c RDI: ffffed000dc00d60 RBP: ffff88006e006bf0 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 1ffff1000dc00d6d R13: 00000000ffffffff R14: 0000000000000001 R15: ffff88006ce9d340 refcount_dec_and_test+0x1a/0x20 lib/refcount.c:211 reqsk_put+0x71/0x2b0 include/net/request_sock.h:123 tcp_v4_rcv+0x259e/0x2e20 net/ipv4/tcp_ipv4.c:1729 ip_local_deliver_finish+0x2e2/0xba0 net/ipv4/ip_input.c:216 NF_HOOK include/linux/netfilter.h:248 [inline] ip_local_deliver+0x1ce/0x6d0 net/ipv4/ip_input.c:257 dst_input include/net/dst.h:477 [inline] ip_rcv_finish+0x8db/0x19c0 net/ipv4/ip_input.c:397 NF_HOOK include/linux/netfilter.h:248 [inline] ip_rcv+0xc3f/0x17d0 net/ipv4/ip_input.c:488 __netif_receive_skb_core+0x1fb7/0x31f0 net/core/dev.c:4298 __netif_receive_skb+0x2c/0x1b0 net/core/dev.c:4336 process_backlog+0x1c5/0x6d0 net/core/dev.c:5102 napi_poll net/core/dev.c:5499 [inline] net_rx_action+0x6d3/0x14a0 net/core/dev.c:5565 __do_softirq+0x2cb/0xb2d kernel/softirq.c:284 do_softirq_own_stack+0x1c/0x30 arch/x86/entry/entry_64.S:898 </IRQ> do_softirq.part.16+0x63/0x80 kernel/softirq.c:328 do_softirq kernel/softirq.c:176 [inline] __local_bh_enable_ip+0x84/0x90 kernel/softirq.c:181 local_bh_enable include/linux/bottom_half.h:31 [inline] rcu_read_unlock_bh include/linux/rcupdate.h:705 [inline] ip_finish_output2+0x8ad/0x1360 net/ipv4/ip_output.c:231 ip_finish_output+0x74e/0xb80 net/ipv4/ip_output.c:317 NF_HOOK_COND include/linux/netfilter.h:237 [inline] ip_output+0x1cc/0x850 net/ipv4/ip_output.c:405 dst_output include/net/dst.h:471 [inline] ip_local_out+0x95/0x160 net/ipv4/ip_output.c:124 ip_queue_xmit+0x8c6/0x1810 net/ipv4/ip_output.c:504 tcp_transmit_skb+0x1963/0x3320 net/ipv4/tcp_output.c:1123 tcp_send_ack.part.35+0x38c/0x620 net/ipv4/tcp_output.c:3575 tcp_send_ack+0x49/0x60 net/ipv4/tcp_output.c:3545 tcp_rcv_synsent_state_process net/ipv4/tcp_input.c:5795 [inline] tcp_rcv_state_process+0x4876/0x4b60 net/ipv4/tcp_input.c:5930 tcp_v4_do_rcv+0x58a/0x820 net/ipv4/tcp_ipv4.c:1483 sk_backlog_rcv include/net/sock.h:907 [inline] __release_sock+0x124/0x360 net/core/sock.c:2223 release_sock+0xa4/0x2a0 net/core/sock.c:2715 inet_wait_for_connect net/ipv4/af_inet.c:557 [inline] __inet_stream_connect+0x671/0xf00 net/ipv4/af_inet.c:643 inet_stream_connect+0x58/0xa0 net/ipv4/af_inet.c:682 SYSC_connect+0x204/0x470 net/socket.c:1628 SyS_connect+0x24/0x30 net/socket.c:1609 entry_SYSCALL_64_fastpath+0x18/0xad RIP: 0033:0x451e59 RSP: 002b:00007f474843fc08 EFLAGS: 00000216 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 0000000000718000 RCX: 0000000000451e59 RDX: 0000000000000010 RSI: 0000000020002000 RDI: 0000000000000007 RBP: 0000000000000046 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000216 R12: 0000000000000000 R13: 00007ffc040a0f8f R14: 00007f47484409c0 R15: 0000000000000000 Fixes: ebb516af ("tcp/dccp: fix race at listener dismantle phase") Signed-off-by:Shankara Pailoor <sp3485@columbia.edu> Tested-by:
-
Christophe JAILLET authored
All other error handling paths in this function go through the 'error' label. This one should do the same. Fixes: 9cc9a5cb ("datapath: Avoid using stack larger than 1024.") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by:
-
Nisar Sayed authored
Configure pause time to 0xffff when tx flow control enabled Set pause time to 0xffff in the pause frame to indicate the partner to stop sending the packets. When RX buffer frees up, the device sends pause frame with pause time zero for partner to resume transmission. Fixes: 2f7ca802 ("Add SMSC LAN9500 USB2.0 10/100 ethernet adapter driver") Signed-off-by:
Nisar Sayed <Nisar.Sayed@microchip.com> Signed-off-by:
-
- 11 Sep, 2017 8 commits
-
-
Josh Hunt authored
Fixes sparse warning about pointer in gen_handle: net/sched/cls_rsvp.h:392:40: warning: Using plain integer as NULL pointer Fixes: 8113c095 ("net_sched: use void pointer for filter handle") Signed-off-by:
Josh Hunt <johunt@akamai.com> Acked-by:
-
David Lebrun authored
As seg6_validate_srh() already checks that the Routing Header type is correct, it is not necessary to do it again in get_srh(). Fixes: 5829d70b ("ipv6: sr: fix get_srh() to comply with IPv6 standard "RFC 8200") Signed-off-by:
David Lebrun <dlebrun@google.com> Signed-off-by:
-
Jesper Dangaard Brouer authored
Using bpf_redirect_map is allowed for generic XDP programs, but the appropriate map lookup was never performed in xdp_do_generic_redirect(). Instead the map-index is directly used as the ifindex. For the xdp_redirect_map sample in SKB-mode '-S', this resulted in trying sending on ifindex 0 which isn't valid, resulting in getting SKB packets dropped. Thus, the reported performance numbers are wrong in commit 24251c26 ("samples/bpf: add option for native and skb mode for redirect apps") for the 'xdp_redirect_map -S' case. Before commit 109980b8 ("bpf: don't select potentially stale ri->map from buggy xdp progs") it could crash the kernel. Like this commit also check that the map_owner owner is correct before dereferencing the map pointer. But make sure that this API misusage can be caught by a tracepoint. Thus, allowing userspace via tracepoints to detect misbehaving bpf_progs. Fixes: 6103aa96 ("net: implement XDP_REDIRECT for xdp generic") Fixes: 24251c26 ("samples/bpf: add option for native and skb mode for redirect apps") Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
-
Yonghong Song authored
clang does not support variable length array for structure member. It has the following error during compilation: kernel/trace/trace_syscalls.c:568:17: error: fields must have a constant size: 'variable length array in structure' extension will never be supported unsigned long args[sys_data->nb_args]; ^ The fix is to use a fixed array length instead. Reported-by:Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Yonghong Song <yhs@fb.com> Signed-off-by:
-
Kosuke Tatsukawa authored
Commit cbf5ecb3 ("net: bonding: Fix transmit load balancing in balance-alb mode") tried to fix transmit dynamic load balancing in balance-alb mode, which wasn't working after commit 8b426dc5 ("bonding: remove hardcoded value"). It turned out that my previous patch only fixed the case when balance-alb was specified as bonding module parameter, and not when balance-alb mode was set using /sys/class/net/*/bonding/mode (the most common usage). In the latter case, tlb_dynamic_lb was set up according to the default mode of the bonding interface, which happens to be balance-rr. This additional patch addresses this issue by setting up tlb_dynamic_lb to 1 if "mode" is set to balance-alb through the sysfs interface. I didn't add code to change tlb_balance_lb back to the default value for other modes, because "mode" is usually set up only once during initialization, and it's not worthwhile to change the static variable bonding_defaults in bond_main.c to a global variable just for this purpose. Commit 8b426dc5 also changes the value of tlb_dynamic_lb for balance-tlb mode if it is set up using the sysfs interface. I didn't change that behavior, because the value of tlb_balance_lb can be changed using the sysfs interface for balance-tlb, and I didn't like changing the default value back and forth for balance-tlb. As for balance-alb, /sys/class/net/*/bonding/tlb_balance_lb cannot be written to. However, I think balance-alb with tlb_dynamic_lb set to 0 is not an intended usage, so there is little use making it writable at this moment. Fixes: 8b426dc5 ("bonding: remove hardcoded value") Reported-by:
Reinis Rozitis <r@roze.lv> Signed-off-by:
Kosuke Tatsukawa <tatsu@ab.jp.nec.com> Cc: stable@vger.kernel.org # v4.12+ Acked-by:
-
Stephen Hemminger authored
Only need to wakeup the initiator after all sub-channels are opened. Signed-off-by:
Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by:
-
Stephen Hemminger authored
When a virtual device is added dynamically (via host console), then the vmbus sends an offer message for the primary channel. The processing of this message for networking causes the network device to then initialize the sub channels. The problem is that setting up the sub channels needs to wait until the subsequent subchannel offers have been processed. These offers come in on the same ring buffer and work queue as where the primary offer is being processed; leading to a deadlock. This did not happen in older kernels, because the sub channel waiting logic was broken (it wasn't really waiting). The solution is to do the sub channel setup in its own work queue context that is scheduled by the primary channel setup; and then happens later. Fixes: 732e4985 ("netvsc: fix race on sub channel creation") Reported-by:
Dexuan Cui <decui@microsoft.com> Signed-off-by:
-
Arkadi Sharshevsky authored
The current code does not handle correctly the access to the upper page in case of SFP/SFP+ EEPROM. In that case the offset should be local and the I2C address should be changed. Fixes: 2ea10903 ("mlxsw: spectrum: Add support for access cable info via ethtool") Reported-by:
Florian Klink <flokli@flokli.de> Signed-off-by:
Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
- 09 Sep, 2017 3 commits
-
-
Dan Carpenter authored
There is a typo here so we accidentally free "skb" instead of "skbn". It leads to a double free and a leak. After discussing with Subash, it's better to just move the check before the allocation and avoid the need to free. Fixes: ceed73a2 ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation") Signed-off-by:
Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by:
-
git://linux-nfs.org/~bfields/linuxLinus Torvalds authored
Pull nfsd updates from Bruce Fields: "More RDMA work and some op-structure constification from Chuck Lever, and a small cleanup to our xdr encoding" * tag 'nfsd-4.14' of git://linux-nfs.org/~bfields/linux: svcrdma: Estimate Send Queue depth properly rdma core: Add rdma_rw_mr_payload() svcrdma: Limit RQ depth svcrdma: Populate tail iovec when receiving nfsd: Incoming xdr_bufs may have content in tail buffer svcrdma: Clean up svc_rdma_build_read_chunk() sunrpc: Const-ify struct sv_serv_ops nfsd: Const-ify NFSv4 encoding and decoding ops arrays sunrpc: Const-ify instances of struct svc_xprt_ops nfsd4: individual encoders no longer see error cases nfsd4: skip encoder in trivial error cases nfsd4: define ->op_release for compound ops nfsd4: opdesc will be useful outside nfs4proc.c nfsd4: move some nfsd4 op definitions to xdr4.h
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs updates from David Sterba: "The changes range through all types: cleanups, core chagnes, sanity checks, fixes, other user visible changes, detailed list below: - deprecated: user transaction ioctl - mount option ssd does not change allocation alignments - degraded read-write mount is allowed if all the raid profile constraints are met, now based on more accurate check - defrag: do not reset compression afterwards; the NOCOMPRESS flag can be now overriden by defrag - prep work for better extent reference tracking (related to the qgroup slowness with balance) - prep work for compression heuristics - memory allocation reductions (may help latencies on a loaded system) - better accounting for io waiting states - error handling improvements (removed BUGs) - added more sanity checks for shared refs - fix readdir vs pagefault deadlock under some circumstances - fix for 'no-hole' mode, certain combination of compressed and inline extents - send: fix emission of invalid clone operations - fixup file mode if setting acls fail - more fixes from fuzzing - oher cleanups" * 'for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (104 commits) btrfs: submit superblock io with REQ_META and REQ_PRIO btrfs: remove unnecessary memory barrier in btrfs_direct_IO btrfs: remove superfluous chunk_tree argument from btrfs_alloc_dev_extent btrfs: Remove chunk_objectid parameter of btrfs_alloc_dev_extent btrfs: pass fs_info to btrfs_del_root instead of tree_root Btrfs: add one more sanity check for shared ref type Btrfs: remove BUG_ON in __add_tree_block Btrfs: remove BUG() in add_data_reference Btrfs: remove BUG() in print_extent_item Btrfs: remove BUG() in btrfs_extent_inline_ref_size Btrfs: convert to use btrfs_get_extent_inline_ref_type Btrfs: add a helper to retrive extent inline ref type btrfs: scrub: simplify scrub worker initialization btrfs: scrub: clean up division in scrub_find_csum btrfs: scrub: clean up division in __scrub_mark_bitmap btrfs: scrub: use bool for flush_all_writes btrfs: preserve i_mode if __btrfs_set_acl() fails btrfs: Remove extraneous chunk_objectid variable btrfs: Remove chunk_objectid argument from btrfs_make_block_group btrfs: Remove extra parentheses from condition in copy_items() ...
-
