Adds a file to show the pci hotplug slot location for the ppc64 driver
only.

This patch contains fixes for interpretation of 0/1 for MRL
to match pcihpview, bus speed definition in shpchp_hpc.c etc.

The patch provides the ability for architectures to have custom
implementations of pci_set_dma_mask() and friends (dac_set_dma_mask
and set_consistent_dma_mask). The reason I need this is b/c I have
a chipset (Intel ARM IXP425) that has a broken PCI interface that
only allows PCI dma to/from the bottom 64MB of system memory.  To get
around this limitation, I trap a custom dma-mapping implementation that
bounces buffers outside the 64MB window. At device discover time, my
custom platform_notify() function gets called and it sets the dma_mask
to (64MB-1) and in ARM's dma-mapping code, I check for dma_mask != 0xffffffff
and if that is true, I call the special bounce helpers. This works great
except that certain drivers (e100, ide-pci) call pci_set_dma_mask()
with 0xffffffff and the generic implementation only allows for the
architecture-defined pci_dma_supported() to return true or false. There
is no method for the architecture to tell the PCI layer "I can't set
the mask to 0xffffffff, but I can set it to this other value" and there
is no way to pass that back to the driver. What this means is that if
I have pci_set_dma_supported() return failure on full 32-bit DMA, the
driver will not initialize the card; however, if I return true,
pci_set_dma_mask() will set the dma mask to full 32-bits and I can no
longer trap and will have buffers that are not dma-able and cause
PCI master aborts.  Both of those are not acceptable.  IMHO, the
driver shouldn't care if the architecture has to bounce DMA outside of
64MB and since this is not something most architectures have to worry
about, the easiest way to get around the issue is by allowing custom
pci_set_dma_mask() for arches that need it but keeping the generic
implementation for those that do not.  In my case, it simply returns
0 to the driver but keeps the device mask set to 64MB-1 so I can trap.

Please commit the following patch, which removes a redundant call to a
cleanup function from an error path of the module init code.

On Tue, 23 Mar 2004 00:23:05 -0500 Jeff Garzik <jgarzik@pobox.com> wrote:
>>Yeah well...  in the intervening time, somebody on IRC commented
>>
>>"so what is so PCI-specific about those constants?"
>>
>>They probably ought to be DMA_{32,64}BIT_MASK or somesuch.

Here's an updated patch, applies to 2.6.5-rc2-bk9.
I left the DMA_xxBIT_MASK defines in linux/pci.h, although
they aren't necessarily PCI-specific.  Would we prefer to
have them in linux/dma-mapping.h ?

There are two unrelated problems in acpiphp that are fixed by this patch.
First, acpiphp can be a module, so it is unsafe to probe the BARs of each
device while it initialises -- the device may be active at the time.
Second, it does not know about PCI-PCI bridge registers and so it reads
garbage for the last 4 registers of the PCI-PCI bridge card and doesn't
take into account the ranges that are forwarded by the bridge.

This patch avoids all that by using the struct resources embedded in
the pci_dev.  Note that we no longer need to recurse as all the devices
on the other side of a PCI-PCI bridge have their resources entirely
contained within the PCI-PCI bridge's ranges.

On the error path, we currently try to up() a semaphore twice.
There was also a typo in an error message.

into kroah.com:/home/greg/linux/BK/pci-2.6

Patch originally written by Intel, cleaned up and made sane by 
Matthew Wilcox <willy@debian.org> and then tweaked a bit more by me.

From Matt's original email:
 - Add cfg_size to struct pci_dev.
 - Use it in sysfs and procfs.
 - Introduce pci_find_ext_capability() for finding extended capabilities.
 - Change the PCI_X_STATUS defines to match the spec (mea culpa there).
 - Add defines for the extended capabilities.

Only allow get_last_written() to override get_capacity(), if it is
bigger.

I figured the best way to stop beeing bothered by users trying to run
preempt was to fix it ;)

Here's a first batch that close some races we had when testing regs->msr
for altivec or FPU enable, then doing the giveup_* function.  A preempt
in between those would have caused us to save a stale altivec or FPU
context.

The dmasound driver occasionally hangs a process on exit.

Apparently there is a possible case where the sound HW stops draining
output samples and the driver waits forever in its release() callback.
It should check for signals(), but it seems signal_pending() never
returns 1 when the process is beeing killed (implicit release() of files
on exit).

This patch adds a safety timeout to the release() function to make sure
we can at least close the driver.  I'll try to find the reason we aren't
driving samples later, but it is better to have a safety just incase the
sound clock goes berserk for some reason.

This fixes some racy code in the management of asynchronous brightness
and battery requests in the via-pmu driver used on powerbooks.  This
should fix some preempt related problems (there is no SMP powerbook yet :)

This fixes a few races in the LED code of the adbhid driver that would
affect SMP or preempt.

The ppc32 syscall entry code could access the thread info flags in a
racy way, thus potentially losing bits sets there at interrupt time or
by another CPU, like NEED_RESCHED or SIGPENDING (ouch !).

This fixes it by moving the potentially racy bit to a different field (I
preferred that rather than turning the access into an atomic operation
for performances reasons).

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Anakin has not been maintained since it was (partially) merged, and
the maintainers appear to ignore mail about it.  No one appears
willing to maintain it either.  However, some unrelated kernel
maintainers have been updating various files while they've been
working in the area - which is wasted work for something which
isn't maintained.

Therefore, this cset removes Anakin completely from the kernel.

This adds AMBA and SA11xx support for dev->coherent_dma_mask.

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Patch from: Daniel Ritz

This patch adds the TI clones from ENE to the override list
in yenta_socket.c.

Patch from: Arthur Othieno

This fixes a typo in arch/arm/boot/Makefile.

Patch from: Rusty Russell

From: Petri Koistinen <petri.koistinen@iki.fi>

URL updates.

Add missing newline to kernel version of NULL-pointer message and also print
the address while we're at it.

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into nuts.davemloft.net:/disk1/BK/sparc-2.6

Stephane made some measurements on the access-pattern of the cpuinfo_ia64
members and based on those results, this patch reorganizes the structure
for better cache-line sharing.