by Aristeu Sergio Rozanski Filho

Currently, scripts/Configure has code for the 'int' verb to take a
min/max.  This violates the spec described in
Documentation/kbuild/config-language.txt.  It also requires that if a
default is outside of +/- 10,000,000 that defaults be provided, or
'config' and 'oldconfig' will get stuck.  The following removes the
support for a min/max from scripts/Configure.

(by Tom Rini)

This add-on patch is needed to abort on Dell Inspiron 8000 / 8100 which
would lock up during speedstep.c and to resolve an oops (thanks to Hu Gang
for reporting this)

CPUFreq 24-API add-on patch for 2.5.39:
kernel/cpufreq.c	cpufreq-24-API
include/linux/cpufreq.h	cpufreq-24-API
arch/i386/config.in	Transmeta LongRun does not work well with cpufreq-24-API
arch/i386/Config.help	help text for CONFIG_CPU_FREQ_24_API

CPUFreq documentation for 2.5.39:
CREDITS			one further CREDIT entry
Documentation/cpufreq	documentation of CPU frequency and voltage scaling
	support in the Linux kernel.
MAINTAINERS		one further MAINTAINERS entry
arch/i386/Config.help	Config.help texts for i386 CPUFreq drivers

CPUFreq i386 drivers for 2.5.39:
arch/i386/config.in				Necessary config options
arch/i386/kernel/cpu/Makefile			allow for compilation of the CPUFreq subdirectory
arch/i386/kernel/cpu/cpufreq/Makefile		Makefile for CPUFreq drivers
arch/i386/kernel/cpu/cpufreq/elanfreq.c		CPUFreq driver for AMD Elan processors
arch/i386/kernel/cpu/cpufreq/longhaul.c		CPUFreq driver for VIA Longhaul processors
arch/i386/kernel/cpu/cpufreq/longrun.c		CPUFreq driver for Transmeta Crusoe processors
arch/i386/kernel/cpu/cpufreq/p4-clockmod.c	CPUFreq driver for Pentium 4 Xeon processors (using clock modulation)
arch/i386/kernel/cpu/cpufreq/powernow-k6.c	CPUFreq driver for mobile AMD K6-2+ and mobile AMD K6-3+ processors
arch/i386/kernel/cpu/cpufreq/speedstep.c	CPUFreq drivers for ICH2-M and ICH3-M chipsets and Intel Pentium 3-M and 4-M processors.

CPUFreq i386 core for 2.5.39:
arch/i386/kernel/i386_ksyms.c	export cpu_khz
arch/i386/kernel/time.c		update various i386 values on frequency
				changes
include/asm-i386/msr.h		add Transmeta MSR defines

CPUFreq core for 2.5.39
include/linux/cpufreq.h		CPUFreq header
kernel/Makefile			add cpufreq.c if necessary
kernel/cpufreq.c		CPUFreq core

More cleanups for the OSS sound modules

This is the smptimers patch plus the removal of old BHs and a rewrite of
task-queue handling.

Basically with the removal of TIMER_BH i think the time is right to get
rid of old BHs forever, and to do a massive cleanup of all related
fields.  The following five basic 'execution context' abstractions are
supported by the kernel:

  - hardirq
  - softirq
  - tasklet
  - keventd-driven task-queues
  - process contexts

I've done the following cleanups/simplifications to task-queues:

 - removed the ability to define your own task-queue, what can be done is
   to schedule_task() a given task to keventd, and to flush all pending
   tasks.

This is actually a quite easy transition, since 90% of all task-queue
users in the kernel used BH_IMMEDIATE - which is very similar in
functionality to keventd.

I believe task-queues should not be removed from the kernel altogether.
It's true that they were written as a candidate replacement for BHs
originally, but they do make sense in a different way: it's perhaps the
easiest interface to do deferred processing from IRQ context, in
performance-uncritical code areas.  They are easier to use than
tasklets.

code that cares about performance should convert to tasklets - as the
timer code and the serial subsystem has done already. For extreme
performance softirqs should be used - the net subsystem does this.

and we can do this for 2.6 - there are only a couple of areas left after
fixing all the BH_IMMEDIATE places.

i have moved all the taskqueue handling code into kernel/context.c, and
only kept the basic 'queue a task' definitions in include/linux/tqueue.h.
I've converted three of the most commonly used BH_IMMEDIATE users:
tty_io.c, floppy.c and random.c. [random.c might need more thought
though.]

i've also cleaned up kernel/timer.c over that of the stock smptimers
patch: privatized the timer-vec definitions (nothing needs it,
init_timer() used it mistakenly) and cleaned up the code. Plus i've moved
some code around that does not belong into timer.c, and within timer.c
i've organized data and functions along functionality and further
separated the base timer code from the NTP bits.

net_bh_lock: i have removed it, since it would synchronize to nothing. The
old protocol handlers should still run on UP, and on SMP the kernel prints
a warning upon use. Alexey, is this approach fine with you?

scalable timers: i've further improved the patch ported to 2.5 by wli and
Dipankar. There is only one pending issue i can see, the question of
whether to migrate timers in mod_timer() or not. I'm quite convinced that
they should be migrated, but i might be wrong. It's a 10 lines change to
switch between migrating and non-migrating timers, we can do performance
tests later on. The current, more complex migration code is pretty fast
and has been stable under extremely high networking loads in the past 2
years, so we can immediately switch to the simpler variant if someone
proves it improves performance. (I'd say if non-migrating timers improve
Apache performance on one of the bigger NUMA boxes then the point is
proven, no further though will be needed.)

Avoid racing on signal delivery with thread signal blocking in thread
groups.

The method to do this is to eliminate the per-thread sigmask_lock, and
use the per-group (per 'process') siglock for all signal related
activities.  This immensely simplified some of the locking interactions
within signal.c, and enabled the fixing of the above category of signal
delivery races.

This became possible due to the former thread-signal patch, which made
siglock an irq-safe thing.  (it used to be a process-context-only
spinlock.) And this is even a speedup for non-threaded applications:
only one lock is used.

I fixed all places within the kernel except the non-x86 arch sections.
Even for them the transition is very straightforward, in almost every
case the following is sufficient in arch/*/kernel/signal.c:

		:1,$s/->sigmask_lock/->sig->siglock/g

Fix thread-group SIGSTOP handling - the SIGSTOP notification was not
propagated to the parent of the thread group leader.  Now Ctrl-Z-ing of
thread groups works again.

Fix thread group signal sending

This fixes one more race left in the new futex hashing code, which
triggers if a futex waiter gets a signal after it has been woken up but
before it actually wakes up.

This fixes the bug reported by David Mosberger, force_sig_info() dropped
the siginfo structure, which broke things like SIGFPU or alignment-error
exceptions.  This bug was introduced by the threading signal changes.
(The patch also fixes signal declaration whitespaces in sched.h.)

into mandrakesoft.com:/home/jgarzik/repo/net-drivers-2.5

8139too, epic100, fealnx, sundance and via-rhine.

In the process, several of these net drivers gained MII ioctl
locking fixes simply by virtue of being brought in line with
standardized code.

and update all drivers that reference this struct member.

* add boolean 'init_media' arg to mii_check_media
* update all callers (just 8139cp, for now)

* fix eeprom accesses
* fix tx desc overflow
* fix tx timeout bug
* add sis963 support

(contributed by Edward Peng @ D-Link)

(contributed by Edward Peng @ D-Link)

(contributed by Edward Peng @ D-Link, cleaned up by me)

conditionally include crc32.h, ethtool.h, mii.h, and compat.h
if built outside the stock 2.4.x kernel.

Conditionally enabled when out-of-tree, but open source, crypto lib
is present.

into mandrakesoft.com:/home/jgarzik/repo/net-drivers-2.5

into home.transmeta.com:/home/torvalds/v2.5/linux

a directory pattern. Clean directories _first_, then files.

into mandrakesoft.com:/home/jgarzik/repo/net-drivers-2.5

into penguin.transmeta.com:/home/penguin/torvalds/repositories/kernel/linux

This URL evaporated long ago, and Alan claims it's not coming back.

Implement a "mapping change" notification for virtual lookup caches, and
make the futex code use that to keep the futex page pinning consistent
across copy-on-write events in the VM space.