Pull SCSI fix from James Bottomley:
 "A single tiny fix in the ufs driver core correcting the reversed logic
  in an error message"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ufs: core: Correct clear TM error log

Pull ceph fixes from Ilya Dryomov:
 "Fixes for an overreaching WARN_ON, two error paths and a switch to
  kernel_connect() which recently grown protection against someone using
  BPF to rewrite the address.

  All but one marked for stable"

* tag 'ceph-for-6.6-rc6' of https://github.com/ceph/ceph-client:
  ceph: fix type promotion bug on 32bit systems
  libceph: use kernel_connect()
  ceph: remove unnecessary IS_ERR() check in ceph_fname_to_usr()
  ceph: fix incorrect revoked caps assert in ceph_fill_file_size()

Pull ACPI fixes from Rafael Wysocki:
 "Add an ACPI EC GPE detection quirk for HP Pavilion Gaming 15-dk1xxx
  and ACPI IRQ override quirks for TongFang GM6BGEQ, GM6BG5Q and
  GM6BG0Q, and for ASUS ExpertBook B1402CBA (Hans de Goede).

* tag 'acpi-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: resource: Add TongFang GM6BGEQ, GM6BG5Q and GM6BG0Q to irq1_edge_low_force_override[]
  ACPI: EC: Add quirk for the HP Pavilion Gaming 15-dk1xxx
  ACPI: resource: Skip IRQ override on ASUS ExpertBook B1402CBA

Pull RISC-V fixes from Palmer Dabbelt:

 - A handful of build fixes

 - A fix to avoid mixing up user/kernel-mode breakpoints, which can
   manifest as a hang when mixing k/uprobes with other breakpoint
   sources

 - A fix to avoid double-allocting crash kernel memory

 - A fix for tracefs syscall name mangling, which was causing syscalls
   not to show up in tracefs

 - A fix to the perf driver to enable the hw events when selected, which
   can trigger a BUG on some userspace access patterns

* tag 'riscv-for-linus-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  drivers: perf: Fix panic in riscv SBI mmap support
  riscv: Fix ftrace syscall handling which are now prefixed with __riscv_
  RISC-V: Fix wrong use of CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK
  riscv: kdump: fix crashkernel reserving problem on RISC-V
  riscv: Remove duplicate objcopy flag
  riscv: signal: fix sigaltstack frame size checking
  riscv: errata: andes: Makefile: Fix randconfig build issue
  riscv: Only consider swbp/ss handlers for correct privileged mode
  riscv: kselftests: Fix mm build by removing testcases subdirectory

Pull soundwire fix from Vinod Koul:
 "A single fix for making sdw bus irq conditionally built"

* tag 'soundwire-6.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
  soundwire: bus: Make IRQ handling conditionally built

Pull dmaengine fixes from Vinod Koul:
 "Driver fixes for:

   - stm32 dma residue calculation and chaining

   - stm32 mdma for setting inflight bytes, residue calculation and
     resume abort

   - channel request, channel enable and dma error in fsl_edma

   - runtime pm imbalance in ste_dma40 driver

   - deadlock fix in mediatek driver"

* tag 'dmaengine-fix-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
  dmaengine: fsl-edma: fix all channels requested when call fsl_edma3_xlate()
  dmaengine: stm32-dma: fix residue in case of MDMA chaining
  dmaengine: stm32-dma: fix stm32_dma_prep_slave_sg in case of MDMA chaining
  dmaengine: stm32-mdma: set in_flight_bytes in case CRQA flag is set
  dmaengine: stm32-mdma: use Link Address Register to compute residue
  dmaengine: stm32-mdma: abort resume if no ongoing transfer
  dmaengine: ste_dma40: Fix PM disable depth imbalance in d40_probe
  dmaengine: mediatek: Fix deadlock caused by synchronize_irq()
  dmaengine: idxd: use spin_lock_irqsave before wait_event_lock_irq
  dmaengine: fsl-edma: fix edma4 channel enable failure on second attempt
  dt-bindings: dmaengine: zynqmp_dma: add xlnx,bus-width required property
  dmaengine: fsl-dma: fix DMA error when enabling sg if 'DONE' bit is set

Pull media fixes from Mauro Carvalho Chehab:

 - a core fix: Don't report V4L2_SUBDEV_CAP_STREAMS when API is disabled

 - ipu-bridge: Add a missing acpi_dev_put()

 - ov8858: fix driver for probe to work after 6.6-rc1

 - xilinx-vipp: fix async notifier logic

* tag 'media/v6.6-5' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  media: i2c: ov8858: Don't set fwnode in the driver
  media: ipu-bridge: Add missing acpi_dev_put() in ipu_bridge_get_ivsc_acpi_dev()
  media: xilinx-vipp: Look for entities also in waiting_list
  media: subdev: Don't report V4L2_SUBDEV_CAP_STREAMS when the streams API is disabled

Merge ACPI EC driver and ACPI resources handlig changes for 6.6-rc6:

 - Add EC GPE fixup quirk for HP Pavilion Gaming 15-dk1xxx (Hans de
   Goede).

 - Add ACPI IRQ override quirks for TongFang GM6BGEQ, GM6BG5Q and
   GM6BG0Q, and for ASUS ExpertBook B1402CBA (ans de Goede).

* acpi-ec:
  ACPI: EC: Add quirk for the HP Pavilion Gaming 15-dk1xxx

* acpi-resource:
  ACPI: resource: Add TongFang GM6BGEQ, GM6BG5Q and GM6BG0Q to irq1_edge_low_force_override[]
  ACPI: resource: Skip IRQ override on ASUS ExpertBook B1402CBA

Pull drm fixes from Dave Airlie:
 "Weekly fixes, the core is msm and amdgpu with some scattered fixes
  across vmwgfx, panel and the core stuff.

  atomic-helper:
   - Relax checks for unregistered connectors

  dma-buf:
   - Work around race condition when retrieving fence timestamp

  gem:
   - Avoid OOB access in BO memory range

  panel:
   - boe-tv101wun-ml6: Fix flickering

  simpledrm:
   - Fix error output

  vwmgfx:
   - Fix size calculation in texture-state code
   - Ref GEM BOs in surfaces

  msm:
   - PHY/link training reset fix
   - msm8998 - correct highest bank bit
   - skip video mode if timing engine disabled
   - check irq_of_parse_and_map return code
   - add new lines to some prints
   - fail atomic check for max mdp clk test

  amdgpu:
   - Seamless boot fix
   - Fix TTM BO resource check
   - SI fix for doorbell handling"

* tag 'drm-fixes-2023-10-13' of git://anongit.freedesktop.org/drm/drm:
  drm/tiny: correctly print `struct resource *` on error
  drm: Do not overrun array in drm_gem_get_pages()
  drm/atomic-helper: relax unregistered connector check
  drm/panel: boe-tv101wum-nl6: Completely pull GPW to VGL before TP term
  drm/amdgpu: fix SI failure due to doorbells allocation
  drm/amdgpu: add missing NULL check
  drm/amd/display: Don't set dpms_off for seamless boot
  drm/vmwgfx: Keep a gem reference to user bos in surfaces
  drm/vmwgfx: fix typo of sizeof argument
  drm/msm/dpu: fail dpu_plane_atomic_check() based on mdp clk limits
  dma-buf: add dma_fence_timestamp helper
  drm/msm/dp: Add newlines to debug printks
  drm/msm/dpu: change _dpu_plane_calc_bw() to use u64 to avoid overflow
  drm/msm/dsi: fix irq_of_parse_and_map() error checking
  drm/msm/dsi: skip the wait for video mode done if not applicable
  drm/msm/mdss: fix highest-bank-bit for msm8998
  drm/msm/dp: do not reinitialize phy unless retry during link training

Merge tag 'amd-drm-fixes-6.6-2023-10-11' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-6.6-2023-10-11:

amdgpu:
- Seemless boot fix
- Fix TTM BO resource check
- SI fix for doorbell handling
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231012025637.7783-1-alexander.deucher@amd.com

Fixes for v6.6-rc5

- fix to not reset the PHY everytime we start link training but only
  do it if link training fails. Without this, the PLL unlocked
  interrupt fires causing "Unexpected DP AUX IRQ 0x01000000 when
  not busy" spam in the logs since last 2-3 cycles
- correct the highest bank bit to match downstream device tree for
  msm8998
- skip the video mode wait if the timing engine is not enabled. This
  was introduced after pre_enable flag for DSI video mode panels
  where we would end up waiting for the video mode done interrupt
  even before enabling timing engine causing error spam and long
  bootup times.
- check the correct return code of irq_of_parse_and_map() in DSI code
- avoid overflow issues in the dpu bandwidth calculation . This was
  exposed for high resolution displays and a critical fix to avoid
  atomic_check failure
- minor fix to add new lines in DP print messages.
- Fix to fail atomic_check() if the resolution exceeds max mdp clk.
  This leads to underflow otherwise if we try to allow that frame.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGv-HNxQ=VBtZ8geGzYJum9jtManEdbvhcjo_WWF_J9Ziw@mail.gmail.com

Pull power supply fixes from Sebastian Reichel:

 - qcom_battmgr: endianness fixes

* tag 'for-v6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
  power: supply: qcom_battmgr: fix enable request endianness
  power: supply: qcom_battmgr: fix battery_id type

Pull block fix from Jens Axboe:
 "Just a single fix for a longstanding regression with using fallocate
  on a block device"

* tag 'block-6.6-2023-10-12' of git://git.kernel.dk/linux:
  block: Don't invalidate pagecache for invalid falloc modes

Short summary of fixes pull:

 * atomic-helper: Relax checks for unregistered connectors
 * dma-buf: Work around race condition when retrieving fence timestamp
 * gem: Avoid OOB access in BO memory range
 * panel:
   * boe-tv101wun-ml6: Fix flickering
 * simpledrm: Fix error output
 * vwmgfx:
   * Fix size calculation in texture-state code
   * Ref GEM BOs in surfaces
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231012111638.GA25037@linux-uq9g

Pull cgroup fixes from Tejun Heo:

 - In cgroup1, the `tasks` file could have duplicate pids which can
   trigger a warning in seq_file. Fix it by removing duplicate items
   after sorting

 - Comment update

* tag 'cgroup-for-6.6-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: Fix incorrect css_set_rwsem reference in comment
  cgroup: Remove duplicates in cgroup v1 tasks file

Pull workqueue fixes from Tejun Heo:

 - Fix access-after-free in pwq allocation error path

 - Implicitly ordered unbound workqueues should lose the implicit
   ordering if an attribute change which isn't compatible with ordered
   operation is requested. However, attribute changes requested through
   the sysfs interface weren't doing that leaving no way to override the
   implicit ordering through the sysfs interface. Fix it.

 - Other doc and misc updates

* tag 'wq-for-6.6-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: fix -Wformat-truncation in create_worker
  workqueue: Override implicit ordered attribute in workqueue_apply_unbound_cpumask()
  workqueue: Use the kmem_cache_free() instead of kfree() to release pwq
  workqueue: doc: Fix function and sysfs path errors
  workqueue: Fix UAF report by KASAN in pwq_release_workfn()

Pull networking fixes from Paolo Abeni:
 "Including fixes from CAN and BPF.

  We have a regression in TC currently under investigation, otherwise
  the things that stand off most are probably the TCP and AF_PACKET
  fixes, with both issues coming from 6.5.

  Previous releases - regressions:

   - af_packet: fix fortified memcpy() without flex array.

   - tcp: fix crashes trying to free half-baked MTU probes

   - xdp: fix zero-size allocation warning in xskq_create()

   - can: sja1000: always restart the tx queue after an overrun

   - eth: mlx5e: again mutually exclude RX-FCS and RX-port-timestamp

   - eth: nfp: avoid rmmod nfp crash issues

   - eth: octeontx2-pf: fix page pool frag allocation warning

  Previous releases - always broken:

   - mctp: perform route lookups under a RCU read-side lock

   - bpf: s390: fix clobbering the caller's backchain in the trampoline

   - phy: lynx-28g: cancel the CDR check work item on the remove path

   - dsa: qca8k: fix qca8k driver for Turris 1.x

   - eth: ravb: fix use-after-free issue in ravb_tx_timeout_work()

   - eth: ixgbe: fix crash with empty VF macvlan list"

* tag 'net-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (54 commits)
  rswitch: Fix imbalance phy_power_off() calling
  rswitch: Fix renesas_eth_sw_remove() implementation
  octeontx2-pf: Fix page pool frag allocation warning
  nfc: nci: assert requested protocol is valid
  af_packet: Fix fortified memcpy() without flex array.
  net: tcp: fix crashes trying to free half-baked MTU probes
  net/smc: Fix pos miscalculation in statistics
  nfp: flower: avoid rmmod nfp crash issues
  net: usb: dm9601: fix uninitialized variable use in dm9601_mdio_read
  ethtool: Fix mod state of verbose no_mask bitset
  net: nfc: fix races in nfc_llcp_sock_get() and nfc_llcp_sock_get_sn()
  mctp: perform route lookups under a RCU read-side lock
  net: skbuff: fix kernel-doc typos
  s390/bpf: Fix unwinding past the trampoline
  s390/bpf: Fix clobbering the caller's backchain in the trampoline
  net/mlx5e: Again mutually exclude RX-FCS and RX-port-timestamp
  net/smc: Fix dependency of SMC on ISM
  ixgbe: fix crash with empty VF macvlan list
  net/mlx5e: macsec: use update_pn flag instead of PN comparation
  net: phy: mscc: macsec: reject PN update requests
  ...

Compiling with W=1 emitted the following warning
(Compiler: gcc (x86-64, ver. 13.2.1, .config: result of make allyesconfig,
"Treat warnings as errors" turned off):

kernel/workqueue.c:2188:54: warning: ‘%d’ directive output may be
	truncated writing between 1 and 10 bytes into a region of size
	between 5 and 14 [-Wformat-truncation=]
kernel/workqueue.c:2188:50: note: directive argument in the range
	[0, 2147483647]
kernel/workqueue.c:2188:17: note: ‘snprintf’ output between 4 and 23 bytes
	into a destination of size 16

setting "id_buf" to size 23 will silence the warning, since GCC
determines snprintf's output to be max. 23 bytes in line 2188.

Please let me know if there are any mistakes in my patch!
Signed-off-by: Lucy Mielke <lucymielke@icloud.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

Commit 5c0338c6 ("workqueue: restore WQ_UNBOUND/max_active==1
to be ordered") enabled implicit ordered attribute to be added to
WQ_UNBOUND workqueues with max_active of 1. This prevented the changing
of attributes to these workqueues leading to fix commit 0a94efb5
("workqueue: implicit ordered attribute should be overridable").

However, workqueue_apply_unbound_cpumask() was not updated at that time.
So sysfs changes to wq_unbound_cpumask has no effect on WQ_UNBOUND
workqueues with implicit ordered attribute. Since not all WQ_UNBOUND
workqueues are visible on sysfs, we are not able to make all the
necessary cpumask changes even if we iterates all the workqueue cpumasks
in sysfs and changing them one by one.

Fix this problem by applying the corresponding change made
to apply_workqueue_attrs_locked() in the fix commit to
workqueue_apply_unbound_cpumask().

Fixes: 5c0338c6 ("workqueue: restore WQ_UNBOUND/max_active==1 to be ordered")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

Pull ARM SoC fixes from Arnd Bergmann:
 "AngeloGioacchino Del Regno is stepping in as co-maintainer for the
  MediaTek SoC platform and starts by sending some dts fixes for the
  mt8195 platform that had been pending for a while.

  On the ixp4xx platform, Krzysztof Halasa steps down as co-maintainer,
  reflecting that Linus Walleij has been handling this on his own for
  the past few years.

  Generic RISC-V kernels are now marked as incompatible with the RZ/Five
  platform that requires custom hacks both for managing its DMA bounce
  buffers and for addressing low virtual memory.

 Finally, there is one bugfix for the AMDTEE firmware driver to prevent
 a use-after-free bug"

* tag 'soc-fixes-6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  IXP4xx MAINTAINERS entries
  arm64: dts: mediatek: mt8195: Set DSU PMU status to fail
  arm64: dts: mediatek: fix t-phy unit name
  arm64: dts: mediatek: mt8195-demo: update and reorder reserved memory regions
  arm64: dts: mediatek: mt8195-demo: fix the memory size to 8GB
  MAINTAINERS: Add Angelo as MediaTek SoC co-maintainer
  soc: renesas: Make ARCH_R9A07G043 (riscv version) depend on NONPORTABLE
  tee: amdtee: fix use-after-free vulnerability in amdtee_close_session

The following panic can happen when mmap is called before the pmu add
callback which sets the hardware counter index: this happens for example
with the following command `perf record --no-bpf-event -n kill`.

[   99.461486] CPU: 1 PID: 1259 Comm: perf Tainted: G            E      6.6.0-rc4ubuntu-defconfig #2
[   99.461669] Hardware name: riscv-virtio,qemu (DT)
[   99.461748] epc : pmu_sbi_set_scounteren+0x42/0x44
[   99.462337]  ra : smp_call_function_many_cond+0x126/0x5b0
[   99.462369] epc : ffffffff809f9d24 ra : ffffffff800f93e0 sp : ff60000082153aa0
[   99.462407]  gp : ffffffff82395c98 tp : ff6000009a218040 t0 : ff6000009ab3a4f0
[   99.462425]  t1 : 0000000000000004 t2 : 0000000000000100 s0 : ff60000082153ab0
[   99.462459]  s1 : 0000000000000000 a0 : ff60000098869528 a1 : 0000000000000000
[   99.462473]  a2 : 000000000000001f a3 : 0000000000f00000 a4 : fffffffffffffff8
[   99.462488]  a5 : 00000000000000cc a6 : 0000000000000000 a7 : 0000000000735049
[   99.462502]  s2 : 0000000000000001 s3 : ffffffff809f9ce2 s4 : ff60000098869528
[   99.462516]  s5 : 0000000000000002 s6 : 0000000000000004 s7 : 0000000000000001
[   99.462530]  s8 : ff600003fec98bc0 s9 : ffffffff826c5890 s10: ff600003fecfcde0
[   99.462544]  s11: ff600003fec98bc0 t3 : ffffffff819e2558 t4 : ff1c000004623840
[   99.462557]  t5 : 0000000000000901 t6 : ff6000008feeb890
[   99.462570] status: 0000000200000100 badaddr: 0000000000000000 cause: 0000000000000003
[   99.462658] [<ffffffff809f9d24>] pmu_sbi_set_scounteren+0x42/0x44
[   99.462979] Code: 1060 4785 97bb 00d7 8fd9 9073 1067 6422 0141 8082 (9002) 0013
[   99.463335] Kernel BUG [#2]

To circumvent this, try to enable userspace access to the hardware counter
when it is selected in addition to when the event is mapped. And vice-versa
when the event is stopped/unmapped.

Fixes: cc4c07c8 ("drivers: perf: Implement perf event mmap support in the SBI backend")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20231006082010.11963-1-alexghiti@rivosinc.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

ftrace creates entries for each syscall in the tracefs but has failed
since commit 08d0ce30 ("riscv: Implement syscall wrappers") which
prefixes all riscv syscalls with __riscv_.

So fix this by implementing arch_syscall_match_sym_name() which allows us
to ignore this prefix.

And also ignore compat syscalls like x86/arm64 by implementing
arch_trace_is_compat_syscall().

Fixes: 08d0ce30 ("riscv: Implement syscall wrappers")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20231003182407.32198-1-alexghiti@rivosinc.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Pull pmdomain fix from Ulf Hansson:

 - imx: scu-pd: Correct the DMA2 channel

* tag 'pmdomain-v6.6-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
  pmdomain: imx: scu-pd: correct DMA2 channel

If configuration options SOFTIRQ_ON_OWN_STACK and PREEMPT_RT
are enabled simultaneously under RISC-V architecture,
it will result in a compilation failure:

arch/riscv/kernel/irq.c:64:6: error: redefinition of 'do_softirq_own_stack'
   64 | void do_softirq_own_stack(void)
      |      ^~~~~~~~~~~~~~~~~~~~
In file included from ./arch/riscv/include/generated/asm/softirq_stack.h:1,
                 from arch/riscv/kernel/irq.c:15:
./include/asm-generic/softirq_stack.h:8:20: note: previous definition of 'do_softirq_own_stack' was here
    8 | static inline void do_softirq_own_stack(void)
      |                    ^~~~~~~~~~~~~~~~~~~~

After changing CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK to CONFIG_SOFTIRQ_ON_OWN_STACK,
compilation can be successful.

Fixes: dd69d07a ("riscv: stack: Support HAVE_SOFTIRQ_ON_OWN_STACK")
Reviewed-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Jiexun Wang <wangjiexun@tinylab.org>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20230913052940.374686-1-wangjiexun@tinylab.org
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

When testing on risc-v QEMU environment with "crashkernel="
parameter enabled, a problem occurred with the following
message:

[    0.000000] crashkernel low memory reserved: 0xf8000000 - 0x100000000 (128 MB)
[    0.000000] crashkernel reserved: 0x0000000177e00000 - 0x0000000277e00000 (4096 MB)
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/resource.c:779 __insert_resource+0x8e/0xd0
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.6.0-rc2-next-20230920 #1
[    0.000000] Hardware name: riscv-virtio,qemu (DT)
[    0.000000] epc : __insert_resource+0x8e/0xd0
[    0.000000]  ra : insert_resource+0x28/0x4e
[    0.000000] epc : ffffffff80017344 ra : ffffffff8001742e sp : ffffffff81203db0
[    0.000000]  gp : ffffffff812ece98 tp : ffffffff8120dac0 t0 : ff600001f7ff2b00
[    0.000000]  t1 : 0000000000000000 t2 : 3428203030303030 s0 : ffffffff81203dc0
[    0.000000]  s1 : ffffffff81211e18 a0 : ffffffff81211e18 a1 : ffffffff81289380
[    0.000000]  a2 : 0000000277dfffff a3 : 0000000177e00000 a4 : 0000000177e00000
[    0.000000]  a5 : ffffffff81289380 a6 : 0000000277dfffff a7 : 0000000000000078
[    0.000000]  s2 : ffffffff81289380 s3 : ffffffff80a0bac8 s4 : ff600001f7ff2880
[    0.000000]  s5 : 0000000000000280 s6 : 8000000a00006800 s7 : 000000000000007f
[    0.000000]  s8 : 0000000080017038 s9 : 0000000080038ea0 s10: 0000000000000000
[    0.000000]  s11: 0000000000000000 t3 : ffffffff80a0bc00 t4 : ffffffff80a0bc00
[    0.000000]  t5 : ffffffff80a0bbd0 t6 : ffffffff80a0bc00
[    0.000000] status: 0000000200000100 badaddr: 0000000000000000 cause: 0000000000000003
[    0.000000] [<ffffffff80017344>] __insert_resource+0x8e/0xd0
[    0.000000] ---[ end trace 0000000000000000 ]---
[    0.000000] Failed to add a Crash kernel resource at 177e00000

The crashkernel memory has been allocated successfully, whereas
it failed to insert into iomem_resource. This is due to the
unique reserving logic in risc-v arch specific code, i.e.
crashk_res/crashk_low_res will be added into iomem_resource
later in init_resources(), which is not aligned with current
unified reserving logic in reserve_crashkernel_{generic,low}()
and therefore leads to the failure of crashkernel reservation.

Removing the arch specific code within #ifdef CONFIG_KEXEC_CORE
in init_resources() to fix above problem.

Fixes: 31549153088e ("riscv: kdump: use generic interface to simplify crashkernel reservation")
Signed-off-by: Chen Jiahao <chenjiahao16@huawei.com>
Link: https://lore.kernel.org/r/20230925024333.730964-1-chenjiahao16@huawei.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

There are two duplicate `-O binary` flags when objcopying from vmlinux
to Image/xipImage.

RISC-V set `-O binary` flag in both OBJCOPYFLAGS in the top-level riscv
Makefile and OBJCOPYFLAGS_* in the boot/Makefile, and the objcopy cmd
in Kbuild would join them together.

The `-O binary` flag is only needed for objcopying Image, so remove the
OBJCOPYFLAGS in the top-level riscv Makefile.

Fixes: c0fbcd99 ("RISC-V: Build flat and compressed kernel images")
Signed-off-by: Song Shuai <songshuaishuai@tinylab.org>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230914091334.1458542-1-songshuaishuai@tinylab.org
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Pull pin control fixes from Linus Walleij:
 "Some pin control fixes for v6.6 which have been stacking up in my
  tree.

  Dmitry's fix to some locking in the core is the most substantial, that
  was a really neat fix.

  The rest is the usual assorted spray of minor driver fixes.

   - Drop some minor code causing warnings in the Lantiq driver

   - Fix out of bounds write in the Nuvoton driver

   - Fix lost IRQs with CONFIG_PM in the Starfive driver

   - Fix a locking issue in find_pinctrl()

   - Revert a regressive Tegra debug patch

   - Fix the Renesas RZN1 pin muxing"

* tag 'pinctrl-v6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: renesas: rzn1: Enable missing PINMUX
  Revert "pinctrl: tegra: Add support to display pin function"
  pinctrl: avoid unsafe code pattern in find_pinctrl()
  pinctrl: starfive: jh7110: Add system pm ops to save and restore context
  pinctrl: starfive: jh7110: Fix failure to set irq after CONFIG_PM is enabled
  pinctrl: nuvoton: wpcm450: fix out of bounds write
  pinctrl: lantiq: Remove unsued declaration ltq_pinctrl_unregister()

Currently, the kfree() be used for pwq objects allocated with
kmem_cache_alloc() in alloc_and_link_pwqs(), this isn't wrong.
but usually, use "trace_kmem_cache_alloc/trace_kmem_cache_free"
to track memory allocation and free. this commit therefore use
kmem_cache_free() instead of kfree() in alloc_and_link_pwqs()
and also consistent with release of the pwq in rcu_free_pwq().
Signed-off-by: Zqiang <qiang.zhang1211@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

alloc_ordered_queue -> alloc_ordered_workqueue
/sys/devices/virtual/WQ_NAME/
    -> /sys/devices/virtual/workqueue/WQ_NAME/
Signed-off-by: WangJinchao <wangjinchao@xfusion.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

Since commit f0d9a5f1 ("cgroup: make css_set_rwsem a spinlock
and rename it to css_set_lock"), css_set_rwsem has been replaced by
css_set_lock. That commit, however, missed the css_set_rwsem reference
in include/linux/cgroup-defs.h. Fix that by changing it to css_set_lock
as well.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

The alternative stack checking in get_sigframe introduced by the Vector
support is not needed and has a problem. It is not needed as we have
already validate it at the beginning of the function if we are already
on an altstack. If not, the size of an altstack is always validated at
its allocation stage with sigaltstack_size_valid().

Besides, we must only regard the size of an altstack if the handler of a
signal is registered with SA_ONSTACK. So, blindly checking overflow of
an altstack if sas_ss_size not equals to zero will check against wrong
signal handlers if only a subset of signals are registered with
SA_ONSTACK.

Fixes: 8ee0b418 ("riscv: signal: Add sigcontext save/restore for vector")
Reported-by: Prashanth Swaminathan <prashanthsw@google.com>
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Link: https://lore.kernel.org/r/20230822164904.21660-1-andy.chiu@sifive.comSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Update MAINTAINERS entries for Intel IXP4xx SoCs.

Linus has been handling all IXP4xx stuff since 2019 or so.
Signed-off-by: Krzysztof Hałasa <khalasa@piap.pl>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Deepak Saxena <dsaxena@plexity.net>
Link: https://lore.kernel.org/r/m3ttqxu4ru.fsf@t19.piap.plSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Yoshihiro Shimoda says:

====================
rswitch: Fix issues on specific conditions

This patch series fix some issues of rswitch driver on specific
condtions.
====================

Link: https://lore.kernel.org/r/20231010124858.183891-1-yoshihiro.shimoda.uh@renesas.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

The phy_power_off() should not be called if phy_power_on() failed.
So, add a condition .power_count before calls phy_power_off().

Fixes: 5cb63092 ("net: renesas: rswitch: Add phy_power_{on,off}() calling")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Fix functions calling order and a condition in renesas_eth_sw_remove().
Otherwise, kernel NULL pointer dereference happens from phy_stop() if
a net device opens.

Fixes: 3590918b ("net: ethernet: renesas: Add support for "Ethernet Switch"")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

The `res` variable is already a `struct resource *`, don't take the address of it.

Fixes incorrect output:

	simple-framebuffer 9e20dc000.framebuffer: [drm] *ERROR* could not acquire memory range [??? 0xffff4be88a387d00-0xfffffefffde0a240 flags 0x0]: -16

To be correct:

	simple-framebuffer 9e20dc000.framebuffer: [drm] *ERROR* could not acquire memory range [mem 0x9e20dc000-0x9e307bfff flags 0x200]: -16
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Fixes: 9a10c7e6 ("drm/simpledrm: Add support for system memory framebuffers")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.3+
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231010174652.2439513-1-joey.gouly@arm.com

If the shared memory object is larger than the DRM object that it backs,
we can overrun the page array.  Limit the number of pages we install
from each folio to prevent this.
Signed-off-by: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Link: https://lore.kernel.org/lkml/13360591.uLZWGnKmhe@natalenko.name/
Fixes: 3291e09a ("drm: convert drm_gem_put_pages() to use a folio_batch")
Cc: stable@vger.kernel.org # 6.5.x
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231005135648.2317298-1-willy@infradead.org

Since page pool param's "order" is set to 0, will result
in below warn message if interface is configured with higher
rx buffer size.

Steps to reproduce the issue.
1. devlink dev param set pci/0002:04:00.0 name receive_buffer_size \
   value 8196 cmode runtime
2. ifconfig eth0 up

[   19.901356] ------------[ cut here ]------------
[   19.901361] WARNING: CPU: 11 PID: 12331 at net/core/page_pool.c:567 page_pool_alloc_frag+0x3c/0x230
[   19.901449] pstate: 82401009 (Nzcv daif +PAN -UAO +TCO -DIT +SSBS BTYPE=--)
[   19.901451] pc : page_pool_alloc_frag+0x3c/0x230
[   19.901453] lr : __otx2_alloc_rbuf+0x60/0xbc [rvu_nicpf]
[   19.901460] sp : ffff80000f66b970
[   19.901461] x29: ffff80000f66b970 x28: 0000000000000000 x27: 0000000000000000
[   19.901464] x26: ffff800000d15b68 x25: ffff000195b5c080 x24: ffff0002a5a32dc0
[   19.901467] x23: ffff0001063c0878 x22: 0000000000000100 x21: 0000000000000000
[   19.901469] x20: 0000000000000000 x19: ffff00016f781000 x18: 0000000000000000
[   19.901472] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[   19.901474] x14: 0000000000000000 x13: ffff0005ffdc9c80 x12: 0000000000000000
[   19.901477] x11: ffff800009119a38 x10: 4c6ef2e3ba300519 x9 : ffff800000d13844
[   19.901479] x8 : ffff0002a5a33cc8 x7 : 0000000000000030 x6 : 0000000000000030
[   19.901482] x5 : 0000000000000005 x4 : 0000000000000000 x3 : 0000000000000a20
[   19.901484] x2 : 0000000000001080 x1 : ffff80000f66b9d4 x0 : 0000000000001000
[   19.901487] Call trace:
[   19.901488]  page_pool_alloc_frag+0x3c/0x230
[   19.901490]  __otx2_alloc_rbuf+0x60/0xbc [rvu_nicpf]
[   19.901494]  otx2_rq_aura_pool_init+0x1c4/0x240 [rvu_nicpf]
[   19.901498]  otx2_open+0x228/0xa70 [rvu_nicpf]
[   19.901501]  otx2vf_open+0x20/0xd0 [rvu_nicvf]
[   19.901504]  __dev_open+0x114/0x1d0
[   19.901507]  __dev_change_flags+0x194/0x210
[   19.901510]  dev_change_flags+0x2c/0x70
[   19.901512]  devinet_ioctl+0x3a4/0x6c4
[   19.901515]  inet_ioctl+0x228/0x240
[   19.901518]  sock_ioctl+0x2ac/0x480
[   19.901522]  __arm64_sys_ioctl+0x564/0xe50
[   19.901525]  invoke_syscall.constprop.0+0x58/0xf0
[   19.901529]  do_el0_svc+0x58/0x150
[   19.901531]  el0_svc+0x30/0x140
[   19.901533]  el0t_64_sync_handler+0xe8/0x114
[   19.901535]  el0t_64_sync+0x1a0/0x1a4
[   19.901537] ---[ end trace 678c0bf660ad8116 ]---

Fixes: b2e3406a ("octeontx2-pf: Add support for page pool")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Reviewed-by: Yunsheng Lin <linyunsheng@huawei.com>
Link: https://lore.kernel.org/r/20231010034842.3807816-1-rkannoth@marvell.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

The protocol is used in a bit mask to determine if the protocol is
supported. Assert the provided protocol is less than the maximum
defined so it doesn't potentially perform a shift-out-of-bounds and
provide a clearer error for undefined protocols vs unsupported ones.

Fixes: 6a2968aa ("NFC: basic NCI protocol implementation")
Reported-and-tested-by: syzbot+0839b78e119aae1fec78@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=0839b78e119aae1fec78Signed-off-by: Jeremy Cline <jeremy@jcline.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231009200054.82557-1-jeremy@jcline.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Sergei Trofimovich reported a regression [0] caused by commit a0ade840
("af_packet: Fix warning of fortified memcpy() in packet_getname().").

It introduced a flex array sll_addr_flex in struct sockaddr_ll as a
union-ed member with sll_addr to work around the fortified memcpy() check.

However, a userspace program uses a struct that has struct sockaddr_ll in
the middle, where a flex array is illegal to exist.

  include/linux/if_packet.h:24:17: error: flexible array member 'sockaddr_ll::<unnamed union>::<unnamed struct>::sll_addr_flex' not at end of 'struct packet_info_t'
     24 |                 __DECLARE_FLEX_ARRAY(unsigned char, sll_addr_flex);
        |                 ^~~~~~~~~~~~~~~~~~~~

To fix the regression, let's go back to the first attempt [1] telling
memcpy() the actual size of the array.
Reported-by: Sergei Trofimovich <slyich@gmail.com>
Closes: https://github.com/NixOS/nixpkgs/pull/252587#issuecomment-1741733002 [0]
Link: https://lore.kernel.org/netdev/20230720004410.87588-3-kuniyu@amazon.com/ [1]
Fixes: a0ade840 ("af_packet: Fix warning of fortified memcpy() in packet_getname().")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20231009153151.75688-1-kuniyu@amazon.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>