- 14 Jun, 2020 40 commits
-
-
Lars-Peter Clausen authored
If a driver does not assign an of_node to a IIO device to IIO core will automatically assign the of_node of the parent device. This automatic assignment is done in the iio_device_register() function. There is a fair amount of drivers that currently manually assign the of_node of the IIO device. All but 4 of them can make use of the automatic assignment though. The exceptions are: * mxs-lradc-adc: Which uses the of_node of the parent of the parent. * stm32-dfsdm-adc, stm32-adc and stm32-dac: Which reference the of_node assigned to the IIO device before iio_device_register() is called. All other drivers are updated to use automatic assignment. This reduces the amount of boilerplate code involved in setting up the IIO device. The patch has mostly been auto-generated with the following semantic patch // <smpl> @exists@ expression indio_dev; expression parent; @@ indio_dev = \(devm_iio_device_alloc\|iio_device_alloc\)(&parent, ...) ... -indio_dev->dev.of_node = parent.of_node; @exists@ expression indio_dev; expression parent; @@ indio_dev = \(devm_iio_device_alloc\|iio_device_alloc\)(parent, ...) ... -indio_dev->dev.of_node = parent->of_node; // </smpl> Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Alexandru Ardelean authored
These were found by doing some shell magic: ------------ for file in $(git grep -w devm_iio_device_alloc | cut -d: -f1 | sort | uniq) ; do if grep 'parent =' $file | grep -v trig | grep -vq devm_; then echo "$file -> $(grep "parent =" $file)" fi done ----------- The output is bearable [after the semantic patch is applied]. There is a mix of trigger assignments with some iio device parent assignments that are removed via this patch. JC: A few more added via inspection of all parent = statements in drivers/iio. Some of these may just have crossed with this series, others were less obvious to scripting due to some cross file / module boundary calls. Signed-off-by:
Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by:
-
Alexandru Ardelean authored
This assignment is the more peculiar as it assigns the parent of the platform-device's device (i.e. pdev->dev.parent) as the IIO device's parent. Since the devm_iio_device_alloc() [now] assigns the device argument as the default parent (and since this is the more common case), for cases where the parent needs to be different, the iio_device_set_parent helper should be used. That makes things a bit more obvious about the new behavior of devm_iio_device_alloc() and makes it clearer that iio_device_set_parent() should be used. Signed-off-by:
-
Alexandru Ardelean authored
These were obtained by doing a 'git diff | grep \/\*', in the previous diff to find comments. These needed a bit more manual review, as the semantic patch isn't great for catching these. The result is: /* Initialize Counter device and driver data */ /* Initialize IIO device */ /* Establish that the iio_dev is a child of the spi device */ /* Estabilish that the iio_dev is a child of the spi device */ /* Initiate the Industrial I/O device */ /* Establish that the iio_dev is a child of the device */ - /* establish that the iio_dev is a child of the i2c device */ - /* establish that the iio_dev is a child of the i2c device */ /* This is only used for removal purposes */ /* setup the industrialio driver allocated elements */ /* variant specific configuration */ /* Setup for userspace synchronous on demand sampling. */ st->readback_delay_us += 5; /* Add tWAIT */ - /* Establish that the iio_dev is a child of the i2c device */ /* Establish that the iio_dev is a child of the i2c device */ Out of which, 4 are really left-over comments about parent assignment. 3 of them are removed by the semantic patch, as the comment removed (by spatch) would be for an empty line. Signed-off-by:
-
Alexandru Ardelean authored
This patch applies the semantic patch: @@ expression I, P, SP; @@ I = devm_iio_device_alloc(P, SP); ... - I->dev.parent = P; It updates 302 files and does 307 deletions. This semantic patch also removes some comments like '/* Establish that the iio_dev is a child of the i2c device */' But this is is only done in case where the block is left empty. The patch does not seem to cover all cases. It looks like in some cases a different variable is used in some cases to assign the parent, but it points to the same reference. In other cases, the block covered by ... may be just too big to be covered by the semantic patch. However, this looks pretty good as well, as it does cover a big bulk of the drivers that should remove the parent assignment. Signed-off-by:
-
Alexandru Ardelean authored
By default, the device allocation will also assign a parent device to the IIO device object. In cases where devm_iio_device_alloc() is used, sometimes the parent device must be different than the device used to manage the allocation. In that case, this helper should be used to change the parent, hence the requirement to call this between allocation & registration. This pattern/requirement is not very common in the IIO space, and it may be cleaned up later. But until then, assigning the parent manually between allocation & registration is slightly easier. Signed-off-by:
-
Alexandru Ardelean authored
The change passes the parent device to the iio_device_alloc() call. This also updates the devm_iio_device_alloc() call to consider the device object as the parent device by default. Having it passed like this, should ensure that any IIO device object already has a device object as parent, allowing for neater control, like passing the 'indio_dev' object for other stuff [like buffers/triggers/etc], and potentially creating iiom_xxx(indio_dev) functions. With this patch, only the 'drivers/platform/x86/toshiba_acpi.c' needs an update to pass the parent object as a parameter. In the next patch all devm_iio_device_alloc() calls will be handled. Acked-by:
-
Chuhong Yuan authored
Since if there is no GPIO, nothing happens, replace devm_gpiod_get() with devm_gpiod_get_optional(). Also add IS_ERR() to fix the missing-check warning. Fixes: cee211f4 ("iio: amplifiers: ad8366: Add support for the ADA4961 DGA") Signed-off-by:
Chuhong Yuan <hslester96@gmail.com> Acked-by:
-
Tomasz Duszynski authored
IIO_CONCENTRATION together with INFO_RAW specifier is used for reporting raw concentrations of pollutants. Raw value should be meaningless before being properly scaled. Because of that description shouldn't mention raw value unit whatsoever. Fix this by rephrasing existing description so it follows conventions used throughout IIO ABI docs. Fixes: 8ff6b3bc ("iio: chemical: Add IIO_CONCENTRATION channel type") Signed-off-by:
Tomasz Duszynski <tomasz.duszynski@octakon.com> Acked-by:
Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by:
-
Alexandru Ardelean authored
Since changes can come from all sort of places, it may make sense to have this symbol as a dependency to make sure that the 'make allmodconfig' && 'make allyesconfig' build rules cover this driver as well for a compile-build/test. It seemed useful [recently] when trying to apply a change for this. Signed-off-by:
Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by:
-
Jonathan Cameron authored
As this just calls dev_get_drvdata underneath which is happy with a const struct device * we should change and avoid potentially casting away a const in order to then put it back again. Signed-off-by:
Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> Signed-off-by:
-
Alexandru Ardelean authored
We may want to get rid of the iio_priv_to_dev() helper. The reason is that we will hide some of the members of the iio_dev structure (to prevent drivers from accessing them directly), and that will also mean hiding the implementation of the iio_priv_to_dev() helper inside the IIO core. Hiding the implementation of iio_priv_to_dev() implies that some fast-paths may not be fast anymore, so a general idea is to try to get rid of the iio_priv_to_dev() altogether. The iio_priv() helper won't be affected by the rework, as the iio_dev struct will keep a reference to the private information. For this driver, not using iio_priv_to_dev(), means reworking some paths to pass the iio device and using iio_priv() to access the private information. Signed-off-by:
Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by:
-
Alexandru Ardelean authored
This was partially removed when the mlock cleanup was done. Only one more call is left in the ad5592r_alloc_channels() function. This one is simple. We just need to pass the iio_dev object and get the state via iio_priv(). Signed-off-by:
-
Jonathan Albrieux authored
Add mount-matrix binding support. As chip could have different orientations a mount matrix support is needed to correctly translate these differences. Signed-off-by:
Jonathan Albrieux <jonathan.albrieux@gmail.com> Signed-off-by:
-
Jonathan Albrieux authored
Add vdd-supply and vddio-supply support. While working on an msm8916 device and having explicit declarations for regulators, without setting these regulators to regulators-always-on it happened those lines weren't ready because they could have been controlled by other components, causing failure in module's probe. This patch aim is to solve this situation by adding regulators control during bmi160_chip_init() and bmi160_chip_uninit(), assuring power to this component. Signed-off-by:
-
Jonathan Albrieux authored
Fix a typo in MODULE_AUTHOR() argument. Signed-off-by:
-
Jonathan Albrieux authored
Add vdd-supply and vddio-supply support. Add mount-matrix support. Signed-off-by:
-
Gwendal Grignou authored
EC does not currently preserve range across sensor reinit. If sensor is powered down at suspend, it will default to the EC default range at resume, not the range set by the host. Save range if modified, and apply at resume. Signed-off-by:
Gwendal Grignou <gwendal@chromium.org> Signed-off-by:
-
Christian Oder authored
The mxc6655 is fully working with the existing mxc4005 driver. Add support for it. Signed-off-by:
Christian Oder <me@myself5.de> Signed-off-by:
-
Rikard Falkeborn authored
mmc35240_reg_defaults is not modified and can be made const to allow the compiler to put it in read-only memory. Before: text data bss dec hex filename 9759 3288 128 13175 3377 drivers/iio/magnetometer/mmc35240.o After: text data bss dec hex filename 9823 3224 128 13175 3377 drivers/iio/magnetometer/mmc35240.o Signed-off-by:
Rikard Falkeborn <rikard.falkeborn@gmail.com> Signed-off-by:
-
Rikard Falkeborn authored
stk3310_regmap_config is not modified and can be made const to allow the compiler to put it in read-only memory. Before: text data bss dec hex filename 16027 5424 128 21579 544b drivers/iio/light/stk3310.o After: text data bss dec hex filename 16347 5104 128 21579 544b drivers/iio/light/stk3310.o Signed-off-by:
-
Rikard Falkeborn authored
ad5592r_ext_info is not modified and can be made const to allow the compiler to put it in read-only memory. Before: text data bss dec hex filename 13293 2088 256 15637 3d15 drivers/iio/dac/ad5592r-base.o After: text data bss dec hex filename 13421 1960 256 15637 3d15 drivers/iio/dac/ad5592r-base.o Signed-off-by:
-
Rikard Falkeborn authored
ad5380_ext_info is not modified and can be made const to allow the compiler to put it in read-only memory. Before: text data bss dec hex filename 12060 3280 192 15532 3cac drivers/iio/dac/ad5380.o After: text data bss dec hex filename 12252 3088 192 15532 3cac drivers/iio/dac/ad5380.o Signed-off-by:
-
Rikard Falkeborn authored
max11100_channels is not modified and can therefore be made const to allow the compiler to put it in read-only memory. Before: text data bss dec hex filename 3776 1168 0 4944 1350 drivers/iio/adc/max11100.o After: text data bss dec hex filename 3968 976 0 4944 1350 drivers/iio/adc/max11100.o Signed-off-by:
-
Andy Shevchenko authored
acpi_dev_get_resources() does perform the NULL pointer check against ACPI companion device which is given as function parameter. Thus, there is no need to duplicate this check in the caller. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Jonathan Albrieux authored
According to AK09911 datasheet, if reset gpio is provided then deassert reset on ak8975_power_on() and assert reset on ak8975_power_off(). Without reset's deassertion during ak8975_power_on(), driver's probe fails on ak8975_who_i_am() while checking for device identity for AK09911 chip. AK09911 has an active low reset gpio to handle register's reset. AK09911 datasheet says that, if not used, reset pin should be connected to VID. This patch emulates this situation. Signed-off-by:
Stephan Gerhold <stephan@gerhold.net> Signed-off-by:
-
Jonathan Albrieux authored
Minor comment style edits. Signed-off-by:
-
Jonathan Albrieux authored
Add reset-gpio support. Without reset's deassertion during ak8975_power_on(), driver's probe fails on ak8975_who_i_am() while checking for device identity for AK09911 chip. AK09911 has an active low reset gpio to handle register's reset. AK09911 datasheet says that, if not used, reset pin should be connected to VID. This patch emulates this situation. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Jonathan Albrieux authored
Converts documentation from txt format to yaml. Signed-off-by:
-
Jonathan Albrieux authored
Reword gpios documentation, add interrupt documentation and fix styles. Update example to use interrupts instead of gpios. Signed-off-by:
-
Jishnu Prakash authored
Change pr_err/pr_debug statements to dev_err/dev_dbg for increased clarity. Signed-off-by:
Jishnu Prakash <jprakash@codeaurora.org> Reviewed-by:
-
Jishnu Prakash authored
Clean up some return value checks to make code more compact. Signed-off-by:
-
Jishnu Prakash authored
The ADC architecture on PMIC7 is changed as compared to PMIC5. The major change from PMIC5 is that all SW communication to ADC goes through PMK8350, which communicates with other PMICs through PBS when the ADC on PMK8350 works in master mode. The SID register is used to identify the PMICs with which the PBS needs to communicate. Add support for the same. Signed-off-by:
-
Jishnu Prakash authored
Add info property under adc_data to support adding ADC variants which may use different iio_info than the one defined for PMIC5. Signed-off-by:
-
Jishnu Prakash authored
Add documentation for PMIC7 ADC peripheral. For the PMIC7-type PMICs, ADC peripheral is present in HW for the following PMICs: PMK8350, PM8350, PM8350b, PMR735a and PMR735b. Of these, only the ADC peripheral on PMK8350 is exposed directly to SW. If SW needs to communicate with ADCs on other PMICs, it specifies the PMIC to PMK8350 through the newly added SID register and communication between PMK8350 ADC and other PMIC ADCs is carried out through PBS(Programmable Boot Sequence) at the firmware level. In addition, add definitions for ADC channels and virtual channel definitions (combination of ADC channel number and PMIC SID number) per PMIC, to be used by ADC clients for PMIC7. Signed-off-by:
Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by:
-
Jishnu Prakash authored
Convert the adc bindings from .txt to .yaml format. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Dan Robertson authored
Add basic support for the Bosch Sensortec BMA400 3-axes ultra-low power accelerometer when configured to use SPI. Signed-off-by:
Dan Robertson <dan@dlrobertson.com> Signed-off-by:
-
Matt Ranostay authored
Move ret variable to the IIO_CHAN_INFO_RAW switch since currently only used within that scope. Signed-off-by:
-
Alexandru Ardelean authored
We may want to get rid of the iio_priv_to_dev() helper. That's a bit uncertain at this point. The reason is that we will hide some of the members of the iio_dev structure (to prevent drivers from accessing them directly), and that will also mean hiding the implementation of the iio_priv_to_dev() helper inside the IIO core. Hiding the implementation of iio_priv_to_dev() implies that some fast-paths may not be fast anymore, so a general idea is to try to get rid of the iio_priv_to_dev() altogether. For this driver, removing the iio_priv_to_dev() helper means passing the iio_dev object on hts221_allocate_buffers() & hts221_allocate_trigger(). Signed-off-by:
-
Alexandru Ardelean authored
We may want to get rid of the iio_priv_to_dev() helper. That's a bit uncertain at this point. The reason is that we will hide some of the members of the iio_dev structure (to prevent drivers from accessing them directly), and that will also mean hiding the implementation of the iio_priv_to_dev() helper inside the IIO core. Hiding the implementation of iio_priv_to_dev() implies that some fast-paths may not be fast anymore, so a general idea is to try to get rid of the iio_priv_to_dev() altogether. For this driver, removing iio_priv_to_dev() also means keeping a reference on the state struct. Signed-off-by:
Jeff LaBundy <jeff@labundy.com> Signed-off-by:
-
