- 03 Oct, 2006 40 commits
-
-
Linus Torvalds authored
Jesper Juhl reported that testing the software math-emulation by forcing "no387" doesn't work on modern CPU's. The reason was two-fold: - you also need to pass in "nofxsr" to make sure that we not only don't touch the old i387 legacy hardware, it also needs to disable the modern XMM/FXSR sequences - "nofxsr" didn't actually clear the capability bits immediately, leaving the early boot sequence still using FXSR until we got to the identify_cpu() stage. This fixes the "nofxsr" flag to take effect immediately on the boot CPU. Debugging by Randy Dunlap Acked-by:
Randy Dunlap <rdunlap@xenotime.net> Cc: Jesper Juhl <jesper.juhl@gmail.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Linus Torvalds authored
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 3848/1: pxafb: Add option of fixing video modes and spitz QVGA mode support [ARM] 3880/1: remove the last trace of iop31x support [ARM] 3879/1: ep93xx: instantiate platform devices for ep93xx ethernet [ARM] 3809/3: get rid of 4 megabyte kernel image size limit [ARM] Fix XIP_KERNEL build error in arch/arm/mm/mmu.c [ARM] 3874/1: Remove leftover usage of asm/timeofday.h
-
Linus Torvalds authored
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-serial: (21 commits) [SERIAL] add PNP IDs for FPI based touchscreens [SERIAL] Magic SysRq SAK does nothing on serial consoles [SERIAL] tickle NMI watchdog on serial output. [SERIAL] Fix oops when removing suspended serial port [SERIAL] Fix resume handling bug [SERIAL] Remove wrong asm/serial.h inclusions [SERIAL] CONFIG_PM=n slim: drivers/serial/8250_pci.c [SERIAL] OMAP1510 serial fix for 115200 baud [SERIAL] returning proper error from serial core driver [SERIAL] Make uart_line_info() correctly tell MMIO from I/O port [SERIAL] suspend/resume handlers don't have level arg anymore [SERIAL] 8250 resourse management fixes [SERIAL] serial_cs: Add quirk for brainboxes 2-port RS232 card [SERIAL] serial_cs: handle Nokia multi->single port bodge via config quirk [SERIAL] serial_cs: add configuration quirk [SERIAL] serial_cs: Convert Oxford 950 / Possio GCC wakeup quirk [SERIAL] serial_cs: convert IBM post-init handling to a quirk [SERIAL] serial_cs: allow wildcarded quirks [SERIAL] serial_cs: convert multi-port table to quirk table [SERIAL] serial_cs: Use clean up multiport card detection ...
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: Fixup __raw_read_trylock(). sh: Kill off remaining config.h references. sh: Initial gitignore list sh: build fixes for defconfigs. sh: Kill off more dead headers. sh: Set pclk default for SH7705. sh: defconfig updates.
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh64-2.6: sh64: Remove me from sh64 maintainers. sh64: Update cayman defconfig.
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Update defconfig. [SPARC64]: Do not include compat.h from asm-sparc64/signal.h any more. [SPARC64]: Move signal compat bits to new header file.
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (29 commits) [POWERPC] Fix rheap alignment problem [POWERPC] Use check_legacy_ioport() for ISAPnP [POWERPC] Avoid NULL pointer in gpio1_interrupt [POWERPC] Enable generic rtc hook for the MPC8349 mITX [POWERPC] Add powerpc get/set_rtc_time interface to new generic rtc class [POWERPC] Create a "wrapper" script and use it in arch/powerpc/boot [POWERPC] fix spin lock nesting in hvc_iseries [POWERPC] EEH failure to mark pci slot as frozen. [POWERPC] update powerpc defconfig files after libata kconfig breakage [POWERPC] enable sysrq in pmac32_defconfig [POWERPC] UPIO_TSI cleanup [POWERPC] rewrite mkprep and mkbugboot in sane C [POWERPC] maple/pci iomem annotations [POWERPC] powerpc oprofile __user annotations [POWERPC] cell spufs iomem annotations [POWERPC] NULL noise removal: spufs [POWERPC] ppc math-emu needs -fno-builtin-fabs for math.c and fabs.c [POWERPC] update mpc8349_itx_defconfig and remove some debug settings [POWERPC] Always call cede in pseries dedicated idle loop [POWERPC] Fix loop logic in irq_alloc_virt() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuildLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild: kbuild: trivial documentation fixes kconfig: fix saving alternate kconfig file in parent dir kbuild: make modpost processing configurable kconfig/menuconfig: do not let ncurses clutter screen on exit kconfig/lxdialog: clear long menu lines kbuild: do not build mconf & lxdialog unless needed kconfig/lxdialog: fix make mrproper kconfig/lxdialog: support resize kconfig/lxdialog: let <ESC><ESC> behave as expected kconfig/menuconfig: lxdialog is now built-in kconfig/lxdialog: add a new theme bluetitle which is now default kconfig/lxdialog: add support for color themes and add blackbg theme kconfig/lxdialog: refactor color support
-
Zach Brown authored
check pr_debug() arguments When DEBUG isn't defined pr_debug() is defined away as an empty macro. By throwing away the arguments we allow completely incorrect code to build. Instead let's make it an empty inline which checks arguments and mark it so gcc can check the format specification. This results in a seemingly insignificant code size increase. A x86-64 allyesconfig: text data bss dec hex filename 25354768 7191098 4854720 37400586 23ab00a vmlinux.before 25354945 7191138 4854720 37400803 23ab0e3 vmlinux Signed-off-by:
Zach Brown <zach.brown@oracle.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
-
Andrew Morton authored
drivers/isdn/sc/event.c: In function 'indicate_status': drivers/isdn/sc/event.c:49: error: 'events' undeclared (first use in this function) drivers/isdn/sc/event.c:49: error: (Each undeclared identifier is reported only once drivers/isdn/sc/event.c:49: error: for each function it appears in.) drivers/isdn/sc/event.c:49: warning: format '%d' expects type 'int', but argument 4 has type 'ulong' drivers/isdn/sc/interrupt.c: In function 'interrupt_handler': drivers/isdn/sc/interrupt.c:97: warning: format '%x' expects type 'unsigned int', but argument 4 has type 'long unsigned int' drivers/isdn/sc/timer.c: In function 'check_reset': drivers/isdn/sc/timer.c:80: warning: format '%d' expects type 'int', but argument 3 has type 'long unsigned int' Acked-by:
Karsten Keil <kkeil@suse.de> Cc: Zach Brown <zach.brown@oracle.com> Signed-off-by:
-
Andrew Morton authored
When pr_debug() is enabled: drivers/isdn/sc/command.c: In function 'command': drivers/isdn/sc/command.c:107: error: 'commands' undeclared (first use in this function) drivers/isdn/sc/command.c:107: error: (Each undeclared identifier is reported only once drivers/isdn/sc/command.c:107: error: for each function it appears in.) drivers/isdn/sc/command.c:122: warning: format '%x' expects type 'unsigned int', but argument 3 has type 'long unsigned int' drivers/isdn/sc/command.c: In function 'dial': drivers/isdn/sc/command.c:199: warning: format '%d' expects type 'int', but argument 4 has type 'long unsigned int' drivers/isdn/sc/command.c: In function 'answer': drivers/isdn/sc/command.c:221: warning: format '%s' expects type 'char *', but argument 3 has type 'long unsigned int' drivers/isdn/sc/command.c: In function 'hangup': drivers/isdn/sc/command.c:244: warning: format '%d' expects type 'int', but argument 3 has type 'long unsigned int' drivers/isdn/sc/command.c: In function 'setl2': drivers/isdn/sc/command.c:265: error: 'l2protos' undeclared (first use in this function) drivers/isdn/sc/command.c: In function 'setl3': drivers/isdn/sc/command.c:297: error: 'l3protos' undeclared (first use in this function) drivers/isdn/sc/command.c:297: warning: format '%d' expects type 'int', but argument 3 has type 'long unsigned int' drivers/isdn/sc/command.c: In function 'acceptb': drivers/isdn/sc/command.c:315: warning: format '%d' expects type 'int', but argument 3 has type 'long unsigned int' drivers/isdn/sc/command.c: In function 'clreaz': drivers/isdn/sc/command.c:330: warning: format '%d' expects type 'int', but argument 3 has type 'long unsigned int' drivers/isdn/sc/command.c: In function 'seteaz': drivers/isdn/sc/command.c:345: warning: format '%d' expects type 'int', but argument 3 has type 'long unsigned int' Cc: Zach Brown <zach.brown@oracle.com> Acked-by:
-
Frederik Deweerdt authored
It looks like Zach Brown's patch pr_debug-check-pr_debug-arguments worked as inteded. That is, it doesn't "allow completely incorrect code to build." :). The arm build fails with the following message: CC arch/arm/vfp/vfpsingle.o arch/arm/vfp/vfpsingle.c: In function `__vfp_single_normaliseround': arch/arm/vfp/vfpsingle.c:201: error: `func' undeclared (first use in this function) arch/arm/vfp/vfpsingle.c:201: error: (Each undeclared identifier is reported only once arch/arm/vfp/vfpsingle.c:201: error: for each function it appears in.) make[1]: *** [arch/arm/vfp/vfpsingle.o] Error 1 make: *** [arch/arm/vfp] Error 2 The following patch fixes the issue by using func only when DEBUG is defined. Signed-off-by:
Frederik Deweerdt <frederik.deweerdt@gmail.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Zach Brown <zach.brown@oracle.com> Signed-off-by:
-
Zach Brown authored
trident: use size_t length modifier in pr_debug format arguments Signed-off-by:
-
Zach Brown authored
ifb: replace missing comma to separate pr_debug arguments Signed-off-by:
-
Zach Brown authored
dell_rbu: fix pr_debug argument warnings Use size_t length modifier when outputting size_t and use %p instead of %lu for 'u8 *'. Signed-off-by:
-
Zach Brown authored
tipar: repair nonexistant pr_debug argument use I guessed what the pr_debug meant by 'data'. Signed-off-by:
-
Zach Brown authored
umem: repair nonexistant bh pr_debug reference Signed-off-by:
-
Zach Brown authored
sysfs: use size_t length modifier in pr_debug format arguments Signed-off-by:
-
Zach Brown authored
configfs: use size_t length modifier in pr_debug format argument Signed-off-by:
Joel Becker <joel.becker@oracle.com> Signed-off-by:
-
Zach Brown authored
aio: use size_t length modifier in pr_debug format arguments Signed-off-by:
-
NeilBrown authored
Signed-off-by:
Neil Brown <neilb@suse.de> Signed-off-by:
-
Paul Clements authored
Signed-off-by:
-
Paul Clements authored
find_first_set doesn't find the least-significant bit on bigendian machines, so it is really wrong to use it. ffs is closer, but takes an 'int' and we have a 'unsigned long'. So use ffz(~X) to convert a chunksize into a chunkshift. Signed-off-by:
-
NeilBrown authored
I have had enough success reports not to believe that this is safe for 2.6.19. Signed-off-by:
-
NeilBrown authored
Once upon a time we needed to fixed limit to the number of md devices, probably because we preallocated some array. This need no longer exists, but we still have an arbitrary limit. So remove MAX_MD_DEVS and allow as many devices as we can fit into the 'minor' part of a device number. Also remove some useless noise at init time (which reports MAX_MD_DEVS) and remove MD_THREAD_NAME_MAX which hasn't been used for a while. Signed-off-by:
-
NeilBrown authored
md.txt has two sections describing the 'level' sysfs attribute, and some of the text is out-of-date. So make just one section, and make it right. Cc: Christian Kujau <evil@g-house.de> Signed-off-by:
-
NeilBrown authored
It is possible to request a 'check' of an md/raid array where the whole array is read and consistancies are reported. This uses the same mechanisms as 'resync' and so reports in the kernel logs that a resync is being started. This understandably confuses/worries people. Also the text in /proc/mdstat suggests a 'resync' is happen when it is just a check. This patch changes those messages to be more specific about what is happening. Signed-off-by:
-
NeilBrown authored
This is very different from other raid levels and all requests go through a 'stripe cache', and it has congestion management already. Signed-off-by:
-
NeilBrown authored
raid1, raid10 and multipath don't report their 'congested' status through bdi_*_congested, but should. This patch adds the appropriate functions which just check the 'congested' status of all active members (with appropriate locking). raid1 read_balance should be modified to prefer devices where bdi_read_congested returns false. Then we could use the '&' branch rather than the '|' branch. However that should would need some benchmarking first to make sure it is actually a good idea. Signed-off-by:
-
NeilBrown authored
Each backing_dev needs to be able to report whether it is congested, either by modulating BDI_*_congested in ->state, or by defining a ->congested_fn. md/raid did neither of these. This patch add a congested_fn which simply checks all component devices to see if they are congested. Signed-off-by:
-
NeilBrown authored
The error handling routines don't use proper locking, and so two concurrent errors could trigger a problem. So: - use test-and-set and test-and-clear to synchonise the In_sync bits with the ->degraded count - use the spinlock to protect updates to the degraded count (could use an atomic_t but that would be a bigger change in code, and isn't really justified) - remove un-necessary locking in raid5 Signed-off-by: -
NeilBrown authored
It is equivalent to conf->raid_disks - conf->mddev->degraded. Signed-off-by:
-
NeilBrown authored
raid1d has toooo many nested block, so take the fix_read_error functionality out into a separate function. Signed-off-by:
-
Coywolf Qi Hunt authored
Signed-off-by:
Coywolf Qi Hunt <qiyong@freeforge.net> Signed-off-by:
-
Paul Clements authored
Add a new sysfs interface that allows the bitmap of an array to be dirtied. The interface is write-only, and is used as follows: echo "1000" > /sys/block/md2/md/bitmap (dirty the bit for chunk 1000 [offset 0] in the in-memory and on-disk bitmaps of array md2) echo "1000-2000" > /sys/block/md1/md/bitmap (dirty the bits for chunks 1000-2000 in md1's bitmap) This is useful, for example, in cluster environments where you may need to combine two disjoint bitmaps into one (following a server failure, after a secondary server has taken over the array). By combining the bitmaps on the two servers, a full resync can be avoided (This was discussed on the list back on March 18, 2005, "[PATCH 1/2] md bitmap bug fixes" thread). Signed-off-by:
-
NeilBrown authored
It isn't needed as mddev->degraded contains equivalent info. Signed-off-by:
-
NeilBrown authored
They are not needed. conf->failed_disks is the same as mddev->degraded and conf->working_disks is conf->raid_disks - mddev->degraded. Signed-off-by:
-
NeilBrown authored
Instead of magic numbers (0,1,2,3) in sb_dirty, we have some flags instead: MD_CHANGE_DEVS Some device state has changed requiring superblock update on all devices. MD_CHANGE_CLEAN The array has transitions from 'clean' to 'dirty' or back, requiring a superblock update on active devices, but possibly not on spares MD_CHANGE_PENDING A superblock update is underway. We wait for an update to complete by waiting for all flags to be clear. A flag can be set at any time, even during an update, without risk that the change will be lost. Stop exporting md_update_sb - isn't needed. Signed-off-by:
-
NeilBrown authored
raid10d has toooo many nested block, so take the fix_read_error functionality out into a separate function. Signed-off-by:
-
NeilBrown authored
Signed-off-by:
-
