The toc field in the mod_arch_specific struct isn't actually used
anywhere, so remove it.

Also the ftrace-specific fields are now common between 32-bit and
64-bit, so simplify the struct definition a bit by moving them out of
the __powerpc64__ #ifdef.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Init all present cpus for deep states instead of "all possible" cpus.
Init fails if a possible cpu is guarded. Resulting in making only
non-deep states available for cpuidle/hotplug.

Stewart says, this means that for single threaded workloads, if you
guard out a CPU core you'll not get WoF (Workload Optimised
Frequency), which means that performance goes down when you wouldn't
expect it to.

Fixes: 77b54e9f ("powernv/powerpc: Add winkle support for offline cpus")
Cc: stable@vger.kernel.org # v3.19+
Signed-off-by: Akshay Adiga <akshay.adiga@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Comment explanning the raw event code encoding for Power8 was
moved to isa207_common.h file when re-factoring the code to
support power9. But then Power9 pmu branched out due to changes
specific to power9. So move the encoding comment back to power8-pmu.c
Just comment movement and no logic change.

Fixes: 4d3576b2 ('powerpc/perf: factor out power8 pmu macros and defines')
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

The header file <asm/switch_to.h> was missing from the includes. Fix the
following warning, treated as error with W=1:

  arch/powerpc/kernel/vecemu.c:260:5: error: no previous prototype for ‘emulate_altivec’ [-Werror=missing-prototypes]
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

The header file <linux/syscalls.h> was missing from the includes. Fix the
following warning, treated as error with W=1:

  arch/powerpc/kernel/pci_32.c:286:6: error: no previous prototype for ‘sys_pciconfig_iobase’ [-Werror=missing-prototypes]
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Add a missing include <platforms/chrp/chrp.h>.

These functions can all be static, make it so. Fix warnings treated as
errors with W=1:

  arch/powerpc/platforms/chrp/time.c:41:13: error: no previous prototype for ‘chrp_time_init’ [-Werror=missing-prototypes]
  arch/powerpc/platforms/chrp/time.c:66:5: error: no previous prototype for ‘chrp_cmos_clock_read’ [-Werror=missing-prototypes]
  arch/powerpc/platforms/chrp/time.c:74:6: error: no previous prototype for ‘chrp_cmos_clock_write’ [-Werror=missing-prototypes]
  arch/powerpc/platforms/chrp/time.c:86:5: error: no previous prototype for ‘chrp_set_rtc_time’ [-Werror=missing-prototypes]
  arch/powerpc/platforms/chrp/time.c:130:6: error: no previous prototype for ‘chrp_get_rtc_time’ [-Werror=missing-prototypes]
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

These functions can all be static, make it so. Fix warnings treated as
errors with W=1:

  arch/powerpc/kernel/tau_6xx.c:53:6: error: no previous prototype for ‘set_thresholds’ [-Werror=missing-prototypes]
  arch/powerpc/kernel/tau_6xx.c:73:6: error: no previous prototype for ‘TAUupdate’ [-Werror=missing-prototypes]
  arch/powerpc/kernel/tau_6xx.c:208:13: error: no previous prototype for ‘TAU_init_smp’ [-Werror=missing-prototypes]
  arch/powerpc/kernel/tau_6xx.c:220:12: error: no previous prototype for ‘TAU_init’ [-Werror=missing-prototypes]
  arch/powerpc/kernel/tau_6xx.c:126:6: error: no previous prototype for ‘TAUException’ [-Werror=missing-prototypes]
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

This function can be static, make it so, this fix a warning treated as
error with W=1:

  arch/powerpc/kernel/btext.c:173:5: error: no previous prototype for ‘btext_initialize’ [-Werror=missing-prototypes]
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Some function prototypes and body for Thermal Assist Units were not in
sync. Update the function definition to match the existing function
declaration found in `setup-common.c`, changing an `int` return type to a
`u32` return type. Move the prototypes to a header file. Fix the following
warnings, treated as error with W=1:

  arch/powerpc/kernel/tau_6xx.c:257:5: error: no previous prototype for ‘cpu_temp_both’ [-Werror=missing-prototypes]
  arch/powerpc/kernel/tau_6xx.c:262:5: error: no previous prototype for ‘cpu_temp’ [-Werror=missing-prototypes]
  arch/powerpc/kernel/tau_6xx.c:267:5: error: no previous prototype for ‘tau_interrupts’ [-Werror=missing-prototypes]

Compile tested with CONFIG_TAU_INT.
Suggested-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Add one missing prototype for function rh_dump_blk. Fix warning treated as
error in W=1:

  arch/powerpc/lib/rheap.c:740:6: error: no previous prototype for ‘rh_dump_blk’ [-Werror=missing-prototypes]
Suggested-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

The function prototypes were declared within a `#ifdef CONFIG_PPC_LITE5200`
block which would prevent them from being visible when compiling
`mpc52xx_pm.c`. Move the prototypes outside of the `#ifdef` block to fix
the following warnings treated as errors with W=1:

  arch/powerpc/platforms/52xx/mpc52xx_pm.c:58:5: error: no previous prototype for ‘mpc52xx_pm_prepare’ [-Werror=missing-prototypes]
  arch/powerpc/platforms/52xx/mpc52xx_pm.c:113:5: error: no previous prototype for ‘mpc52xx_pm_enter’ [-Werror=missing-prototypes]
  arch/powerpc/platforms/52xx/mpc52xx_pm.c:181:6: error: no previous prototype for ‘mpc52xx_pm_finish’ [-Werror=missing-prototypes]
Suggested-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Add a missing prototype for function `note_bootable_part` to silence a
warning treated as error with W=1:

  arch/powerpc/platforms/powermac/setup.c:361:12: error: no previous prototype for ‘note_bootable_part’ [-Werror=missing-prototypes]
Suggested-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

The pmac_pfunc_base_install prototype was declared in powermac/smp.c since
function was used there, move it to pmac_pfunc.h header to be visible in
pfunc_base.c. Fix a warning treated as error with W=1:

  arch/powerpc/platforms/powermac/pfunc_base.c:330:12: error: no previous prototype for ‘pmac_pfunc_base_install’ [-Werror=missing-prototypes]
Suggested-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

These functions can all be static, make it so. Fix warnings treated as
errors with W=1:

  arch/powerpc/platforms/chrp/pci.c:34:5: error: no previous prototype for ‘gg2_read_config’ [-Werror=missing-prototypes]
  arch/powerpc/platforms/chrp/pci.c:61:5: error: no previous prototype for ‘gg2_write_config’ [-Werror=missing-prototypes]
  arch/powerpc/platforms/chrp/pci.c:97:5: error: no previous prototype for ‘rtas_read_config’ [-Werror=missing-prototypes]
  arch/powerpc/platforms/chrp/pci.c:112:5: error: no previous prototype for ‘rtas_write_config’ [-Werror=missing-prototypes]
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Since the value of x is never intended to be read, declare it with gcc
attribute as unused. Fix warning treated as error with W=1:

  arch/powerpc/platforms/powermac/bootx_init.c:471:21: error: variable ‘x’ set but not used [-Werror=unused-but-set-variable]
Suggested-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Remove variable declaration idu_size and associated code since not used.

These functions can all be static, make it so. Fix warnings treated as
errors with W=1:

  arch/powerpc/platforms/chrp/setup.c:97:6: error: no previous prototype for ‘chrp_show_cpuinfo’ [-Werror=missing-prototypes]
  arch/powerpc/platforms/chrp/setup.c:302:13: error: no previous prototype for ‘chrp_setup_arch’ [-Werror=missing-prototypes]
  arch/powerpc/platforms/chrp/setup.c:385:16: error: variable ‘idu_size’ set but not used [-Werror=unused-but-set-variable]
  arch/powerpc/platforms/chrp/setup.c:526:13: error: no previous prototype for ‘chrp_init_IRQ’ [-Werror=missing-prototypes]
  arch/powerpc/platforms/chrp/setup.c:559:1: error: no previous prototype for ‘chrp_init2’ [-Werror=missing-prototypes]
Suggested-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

The function hlwd_pic_init can be made static, so do it. Fix the following
warning treated as error (W=1):

../arch/powerpc/platforms/embedded6xx/hlwd-pic.c:158:20: error: no previous prototype for ‘hlwd_pic_init’ [-Werror=missing-prototypes]
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

In commit 7a22d632 ("powerpc/mm/radix: Update command line parsing for
disable_radix") an `if` statement was added for a possible empty body
(prom_debug).

Fix the following warning, treated as error with W=1:

  arch/powerpc/kernel/prom_init.c:656:46: error: suggest braces around empty body in an ‘if’ statement [-Werror=empty-body]
Suggested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Trivial fix to remove the following sparse warnings:

  arch/powerpc/kernel/module_32.c:112:74: warning: Using plain integer as NULL pointer
  arch/powerpc/kernel/module_32.c:117:74: warning: Using plain integer as NULL pointer
  drivers/macintosh/via-pmu.c:1155:28: warning: Using plain integer as NULL pointer
  drivers/macintosh/via-pmu.c:1230:20: warning: Using plain integer as NULL pointer
  drivers/macintosh/via-pmu.c:1385:36: warning: Using plain integer as NULL pointer
  drivers/macintosh/via-pmu.c:1752:23: warning: Using plain integer as NULL pointer
  drivers/macintosh/via-pmu.c:2084:19: warning: Using plain integer as NULL pointer
  drivers/macintosh/via-pmu.c:2110:32: warning: Using plain integer as NULL pointer
  drivers/macintosh/via-pmu.c:2167:19: warning: Using plain integer as NULL pointer
  drivers/macintosh/via-pmu.c:2183:19: warning: Using plain integer as NULL pointer
  drivers/macintosh/via-pmu.c:277:20: warning: Using plain integer as NULL pointer
  arch/powerpc/platforms/powermac/setup.c:155:67: warning: Using plain integer as NULL pointer
  arch/powerpc/platforms/powermac/setup.c:247:27: warning: Using plain integer as NULL pointer
  arch/powerpc/platforms/powermac/setup.c:249:27: warning: Using plain integer as NULL pointer
  arch/powerpc/platforms/powermac/setup.c:252:37: warning: Using plain integer as NULL pointer
  arch/powerpc/mm/tlb_hash32.c:127:21: warning: Using plain integer as NULL pointer
  arch/powerpc/mm/tlb_hash32.c:148:21: warning: Using plain integer as NULL pointer
  arch/powerpc/mm/tlb_hash32.c:44:21: warning: Using plain integer as NULL pointer
  arch/powerpc/mm/tlb_hash32.c:57:21: warning: Using plain integer as NULL pointer
  arch/powerpc/mm/tlb_hash32.c:87:21: warning: Using plain integer as NULL pointer
  arch/powerpc/kernel/btext.c:160:31: warning: Using plain integer as NULL pointer
  arch/powerpc/kernel/btext.c:167:22: warning: Using plain integer as NULL pointer
  arch/powerpc/kernel/btext.c:274:21: warning: Using plain integer as NULL pointer
  arch/powerpc/kernel/btext.c:285:31: warning: Using plain integer as NULL pointer
  arch/powerpc/include/asm/hugetlb.h:204:16: warning: Using plain integer as NULL pointer
  arch/powerpc/mm/ppc_mmu_32.c:170:21: warning: Using plain integer as NULL pointer
  arch/powerpc/platforms/powermac/pci.c:1227:23: warning: Using plain integer as NULL pointer
  arch/powerpc/platforms/powermac/pci.c:65:24: warning: Using plain integer as NULL pointer

Also use `--fix` command line option from `script/checkpatch --strict` to
remove the following:

  CHECK: Comparison to NULL could be written "!dispDeviceBase"
  #72: FILE: arch/powerpc/kernel/btext.c:160:
  +	if (dispDeviceBase == NULL)

  CHECK: Comparison to NULL could be written "!vbase"
  #80: FILE: arch/powerpc/kernel/btext.c:167:
  +	if (vbase == NULL)

  CHECK: Comparison to NULL could be written "!base"
  #89: FILE: arch/powerpc/kernel/btext.c:274:
  +	if (base == NULL)

  CHECK: Comparison to NULL could be written "!dispDeviceBase"
  #98: FILE: arch/powerpc/kernel/btext.c:285:
  +	if (dispDeviceBase == NULL)

  CHECK: Comparison to NULL could be written "strstr"
  #117: FILE: arch/powerpc/kernel/module_32.c:117:
  +		if (strstr(secstrings + sechdrs[i].sh_name, ".debug") != NULL)

  CHECK: Comparison to NULL could be written "!Hash"
  #130: FILE: arch/powerpc/mm/ppc_mmu_32.c:170:
  +	if (Hash == NULL)

  CHECK: Comparison to NULL could be written "Hash"
  #143: FILE: arch/powerpc/mm/tlb_hash32.c:44:
  +	if (Hash != NULL) {

  CHECK: Comparison to NULL could be written "!Hash"
  #152: FILE: arch/powerpc/mm/tlb_hash32.c:57:
  +	if (Hash == NULL) {

  CHECK: Comparison to NULL could be written "!Hash"
  #161: FILE: arch/powerpc/mm/tlb_hash32.c:87:
  +	if (Hash == NULL) {

  CHECK: Comparison to NULL could be written "!Hash"
  #170: FILE: arch/powerpc/mm/tlb_hash32.c:127:
  +	if (Hash == NULL) {

  CHECK: Comparison to NULL could be written "!Hash"
  #179: FILE: arch/powerpc/mm/tlb_hash32.c:148:
  +	if (Hash == NULL) {

  ERROR: space required after that ';' (ctx:VxV)
  #192: FILE: arch/powerpc/platforms/powermac/pci.c:65:
  +	for (; node != NULL;node = node->sibling) {

  CHECK: Comparison to NULL could be written "node"
  #192: FILE: arch/powerpc/platforms/powermac/pci.c:65:
  +	for (; node != NULL;node = node->sibling) {

  CHECK: Comparison to NULL could be written "!region"
  #201: FILE: arch/powerpc/platforms/powermac/pci.c:1227:
  +	if (region == NULL)

  CHECK: Comparison to NULL could be written "of_get_property"
  #214: FILE: arch/powerpc/platforms/powermac/setup.c:155:
  +		if (of_get_property(np, "cache-unified", NULL) != NULL && dc) {

  CHECK: Comparison to NULL could be written "!np"
  #223: FILE: arch/powerpc/platforms/powermac/setup.c:247:
  +		if (np == NULL)

  CHECK: Comparison to NULL could be written "np"
  #226: FILE: arch/powerpc/platforms/powermac/setup.c:249:
  +		if (np != NULL) {

  CHECK: Comparison to NULL could be written "l2cr"
  #230: FILE: arch/powerpc/platforms/powermac/setup.c:252:
  +			if (l2cr != NULL) {

  CHECK: Comparison to NULL could be written "via"
  #243: FILE: drivers/macintosh/via-pmu.c:277:
  +	if (via != NULL)

  CHECK: Comparison to NULL could be written "current_req"
  #252: FILE: drivers/macintosh/via-pmu.c:1155:
  +	if (current_req != NULL) {

  CHECK: Comparison to NULL could be written "!req"
  #261: FILE: drivers/macintosh/via-pmu.c:1230:
  +	if (req == NULL || pmu_state != idle

  CHECK: Comparison to NULL could be written "!req"
  #270: FILE: drivers/macintosh/via-pmu.c:1385:
  +			if (req == NULL) {

  CHECK: Comparison to NULL could be written "!pp"
  #288: FILE: drivers/macintosh/via-pmu.c:2084:
  +	if (pp == NULL)

  CHECK: Comparison to NULL could be written "!pp"
  #297: FILE: drivers/macintosh/via-pmu.c:2110:
  +	if (count < 1 || pp == NULL)

  CHECK: Comparison to NULL could be written "!pp"
  #306: FILE: drivers/macintosh/via-pmu.c:2167:
  +	if (pp == NULL)

  CHECK: Comparison to NULL could be written "pp"
  #315: FILE: drivers/macintosh/via-pmu.c:2183:
  +	if (pp != NULL) {

Link: https://github.com/linuxppc/linux/issues/37Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Some functions prototypes were missing for the non-altivec code. Add the
missing prototypes in a new header file, fix warnings treated as errors
with W=1:

  arch/powerpc/lib/xor_vmx_glue.c:18:6: error: no previous prototype for ‘xor_altivec_2’ [-Werror=missing-prototypes]
  arch/powerpc/lib/xor_vmx_glue.c:29:6: error: no previous prototype for ‘xor_altivec_3’ [-Werror=missing-prototypes]
  arch/powerpc/lib/xor_vmx_glue.c:40:6: error: no previous prototype for ‘xor_altivec_4’ [-Werror=missing-prototypes]
  arch/powerpc/lib/xor_vmx_glue.c:52:6: error: no previous prototype for ‘xor_altivec_5’ [-Werror=missing-prototypes]

The prototypes were already present in <asm/xor.h> but this header file is
meant to be included after <include/linux/raid/xor.h>. Trying to re-use
<asm/xor.h> directly would lead to warnings such as:

  arch/powerpc/include/asm/xor.h:39:15: error: variable ‘xor_block_altivec’ has initializer but incomplete type

Trying to re-use <asm/xor.h> after <include/linux/raid/xor.h> in
xor_vmx_glue.c would in turn trigger the following warnings:

  include/asm-generic/xor.h:688:34: error: ‘xor_block_32regs’ defined but not used [-Werror=unused-variable]
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

__printf is useful to verify format and arguments. Fix arg mismatch
reported by gcc, remove the following warnings (with W=1):

  arch/powerpc/kernel/prom_init.c:1467:31: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘long unsigned int’
  arch/powerpc/kernel/prom_init.c:1471:31: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘long unsigned int’
  arch/powerpc/kernel/prom_init.c:1504:33: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘long unsigned int’
  arch/powerpc/kernel/prom_init.c:1505:33: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘long unsigned int’
  arch/powerpc/kernel/prom_init.c:1506:33: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘long unsigned int’
  arch/powerpc/kernel/prom_init.c:1507:33: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘long unsigned int’
  arch/powerpc/kernel/prom_init.c:1508:33: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘long unsigned int’
  arch/powerpc/kernel/prom_init.c:1509:33: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘long unsigned int’
  arch/powerpc/kernel/prom_init.c:1975:39: error: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 2 has type ‘unsigned int’
  arch/powerpc/kernel/prom_init.c:1986:27: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘long unsigned int’
  arch/powerpc/kernel/prom_init.c:2567:38: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘long unsigned int’
  arch/powerpc/kernel/prom_init.c:2567:46: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 3 has type ‘long unsigned int’
  arch/powerpc/kernel/prom_init.c:2569:38: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘long unsigned int’
  arch/powerpc/kernel/prom_init.c:2569:46: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 3 has type ‘long unsigned int’

The patch also include arg mismatch fix for case with #define DEBUG_PROM
(warning not listed here).

This patch fix also the following warnings revealed by checkpatch:

  WARNING: Prefer using '"%s...", __func__' to using 'alloc_up', this function's name, in a string
  #101: FILE: arch/powerpc/kernel/prom_init.c:1235:
  + prom_debug("alloc_up(%lx, %lx)\n", size, align);

and

  WARNING: Prefer using '"%s...", __func__' to using 'alloc_down', this function's name, in a string
  #138: FILE: arch/powerpc/kernel/prom_init.c:1278:
  + prom_debug("alloc_down(%lx, %lx, %s)\n", size, align,
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

The set of paca fields we dump in xmon has gotten somewhat out of
date. Update to add some recently added fields.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

We've added some fields with longer names since we originally wrote
this, so the fields are no longer lined up. Adjust the widths to make
it all look nice again, eg:

  0:mon> dp
  paca for cpu 0x0 @ c000000001fa0000:
   possible                  = yes
   ...
   slb_shadow            [0] = 0xc000000008000000 0x400ea1b217000500
   slb_shadow            [1] = 0xd000000008000001 0x400d43642f000510
   ...
   rfi_flush_fallback_area   = c0000000fff80000   (0xcc8)
   ...
   accounting.starttime_user = 0x51582f07         (0xae8)
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

This allows the compiler to verify the format strings vs the types of
the arguments.

Update the other prototype declarations in asm/xmon.h.

Silence warnings (triggered at W=1) by adding relevant __printf
attribute. Move #define at bottom of the file to prevent conflict with
gcc attribute.

Solves the original warning:

  arch/powerpc/xmon/nonstdio.c:178:2: error: function might be
  possible candidate for ‘gnu_printf’ format attribute

In turn this uncovered many formatting errors in xmon.c, all fixed in
this patch.
Signed-off-by: Mathieu Malaterre <malat@debian.org>
[mpe: Always use px not p, fixup the 44x specific code, tweak change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

In dump_one_paca() the DUMP macro unconditionally prepends '#' to the
printf format specifier. In most cases we're using either 'x' or 'lx'
etc. and that is OK. But for 'p' and other formats using '#' is
actually undefined, and once we enable printf() checking for
xmon_printf() we will get warnings from the compiler.

So just have each usage specify the full format, that way we can omit
'#' when it's inappropriate.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Mathieu Malaterre <malat@debian.org>

When single-stepping kernel code from xmon without a debug hook
enabled the kernel crashes. This can happen when kernel starts with
xmon on crash disabled but xmon is entered using sysrq.

Call force_enable_xmon when single-stepping in xmon to install the
xmon debug hooks.

Fixes: e1368d0c ("powerpc/xmon: Setup debugger hooks when first break-point is set")
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Reviewed-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

New binutils generate the following warning

  AS      arch/powerpc/kernel/head_8xx.o
arch/powerpc/kernel/head_8xx.S: Assembler messages:
arch/powerpc/kernel/head_8xx.S:916: Warning: invalid register expression

This patch fixes it.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

This test the ptrace hw breakpoints via PTRACE_SET_DEBUGREG and
PPC_PTRACE_SETHWDEBUG.  This test was use to find the bugs fixed by
these recent commits:

  4f7c06e2 powerpc/ptrace: Fix setting 512B aligned breakpoints with PTRACE_SET_DEBUGREG
  cd6ef7ee powerpc/ptrace: Fix enforcement of DAWR constraints
Signed-off-by: Michael Neuling <mikey@neuling.org>
[mpe: Add SPDX tag, clang format it]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Commit a7a9dcd8 ("powerpc: Avoid taking a data miss on every
userspace instruction miss") has shown that limiting the read of
faulting instruction to likely cases improves performance.

This patch goes further into this direction by limiting the read
of the faulting instruction to the only cases where it is likely
needed.

On an MPC885, with the same benchmark app as in the commit referred
above, we see a reduction of about 3900 dTLB misses (approx 3%):

Before the patch:
 Performance counter stats for './fault 500' (10 runs):

         683033312      cpu-cycles                                                    ( +-  0.03% )
            134538      dTLB-load-misses                                              ( +-  0.03% )
             46099      iTLB-load-misses                                              ( +-  0.02% )
             19681      faults                                                        ( +-  0.02% )

       5.389747878 seconds time elapsed                                          ( +-  0.06% )

With the patch:

 Performance counter stats for './fault 500' (10 runs):

         682112862      cpu-cycles                                                    ( +-  0.03% )
            130619      dTLB-load-misses                                              ( +-  0.03% )
             46073      iTLB-load-misses                                              ( +-  0.05% )
             19681      faults                                                        ( +-  0.01% )

       5.381342641 seconds time elapsed                                          ( +-  0.07% )

The proper work of the huge stack expansion was tested with the
following app:

int main(int argc, char **argv)
{
	char buf[1024 * 1025];

	sprintf(buf, "Hello world !\n");
	printf(buf);

	exit(0);
}
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Add include of pagemap.h to fix build errors]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Use symbolic names defined in asm/ppc-opcode.h
instead of hardcoded values.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

This patch exports the accumulated power numbers of each power
sensor maintained by OCC.
Signed-off-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

The firmware has supported for reading sensor values of size u32.
This patch adds support to use newer firmware functions which allows
to read the sensors of size u64.
Signed-off-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

This patch adds support to read 64-bit sensor values. This method is
used to read energy sensors and counters which are of type u64.
Signed-off-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Paste on POWER9 only works on accelerators and no longer on real
memory. Hence this test is broken so remove it.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

The sanctioned compatible is "nxp,pca9547".
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

In commit e2a800be ("powerpc/hw_brk: Fix off by one error when
validating DAWR region end") we fixed setting the DAWR end point to
its max value via PPC_PTRACE_SETHWDEBUG. Unfortunately we broke
PTRACE_SET_DEBUGREG when setting a 512 byte aligned breakpoint.

PTRACE_SET_DEBUGREG currently sets the length of the breakpoint to
zero (memset() in hw_breakpoint_init()). This worked with
arch_validate_hwbkpt_settings() before the above patch was applied but
is now broken if the breakpoint is 512byte aligned.

This sets the length of the breakpoint to 8 bytes when using
PTRACE_SET_DEBUGREG.

Fixes: e2a800be ("powerpc/hw_brk: Fix off by one error when validating DAWR region end")
Cc: stable@vger.kernel.org # v3.11+
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Back when we first introduced the DAWR, in commit 4ae7ebe9
("powerpc: Change hardware breakpoint to allow longer ranges"), we
screwed up the constraint making it a 1024 byte boundary rather than a
512. This makes the check overly permissive. Fortunately GDB is the
only real user and it always did they right thing, so we never
noticed.

This fixes the constraint to 512 bytes.

Fixes: 4ae7ebe9 ("powerpc: Change hardware breakpoint to allow longer ranges")
Cc: stable@vger.kernel.org # v3.9+
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

This allows us to squash some sparse warnings and also avoids having
to do explicity endian conversions in the code.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>

This allows us to squash some sparse warnings and also avoids having
to do explicity endian conversions in the code.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>