This bug has apparently existed since the introduction of this function
in the pre-git era (4500e917 in Thomas Gleixner's history.git,
"[NET]: Add proc_dointvec_userhz_jiffies, use it for proper handling of
neighbour sysctls.").

As a minimal fix we can simply duplicate the corresponding check in
do_proc_dointvec_conv().

Link: http://lkml.kernel.org/r/20190207123426.9202-3-zev@bewilderbeest.netSigned-off-by: Zev Weiss <zev@bewilderbeest.net>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: <stable@vger.kernel.org>	[2.6.2+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Patch series "sysctl: fix range-checking in do_proc_dointvec_minmax_conv()", v2.

After being left with an unusable system after a typo executing
something like 'echo $((1<<24)) > /proc/sys/vm/max_map_count', I found
that do_proc_dointvec_minmax_conv() was missing a check to ensure that
the converted value actually fits in an int.

The first of the following patches enhances the sysctl selftest such
that it detects this problem; the second provides a minimal fix
(suitable for -stable) such that the selftest passes.  The third patch
then performs a more thorough refactoring to eliminate the code
duplication that led to the bug in the first place (maintaining the
passing status of the selftest).

This patch (of 3):

At present this exposes a bug in do_proc_dointvec_minmax_conv() (it
fails to check for values that are too wide to fit in an int).

Link: http://lkml.kernel.org/r/20190207123426.9202-2-zev@bewilderbeest.netSigned-off-by: Zev Weiss <zev@bewilderbeest.net>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Iurii Zaikin <yzaikin@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull watchdog updates from Wim Van Sebroeck:

 - a new watchdog driver for the Mellanox systems

 - renesas-wdt: Document r8a77470 support

 - numerous 'Mark expected switch fall-throughs'

 - qcom: Add suspend/resume support

 - some small fixes and documentation updates

* tag 'linux-watchdog-5.1-rc1' of git://www.linux-watchdog.org/linux-watchdog:
  watchdog: w83877f_wdt: Mark expected switch fall-through
  watchdog: sc520_wdt: Mark expected switch fall-through
  watchdog: sbc60xxwdt: Mark expected switch fall-through
  watchdog: smsc37b787_wdt: Mark expected switch fall-through
  watchdog: sc1200: Mark expected switch fall-through
  watchdog: pc87413: Mark expected switch fall-through
  Documentation/watchdog: Add documentation mlx-wdt driver
  watchdog: mlx-wdt: introduce a watchdog driver for Mellanox systems.
  platform_data/mlxreg: additions for Mellanox watchdog driver.
  watchdog: Update sysfs documentation.
  watchdog: dw: remove useless pr_fmt
  watchdog: pika_wdt: drop pointless static qualifier in pikawdt_init
  watchdog/hpwdt: Update Kconfig documentation
  dt-bindings: watchdog: renesas-wdt: Document r8a77470 support
  watchdog: qcom: Add suspend/resume support

Pull pin control updates from Linus Walleij:
 "This is a calm cycle, not much happened this time around: not even
  much incremental development. Some three new drivers, that is all.

  No core changes.

  New drivers:

   - NXP (ex Freescale) i.MX 8QM driver.

   - NXP (ex Freescale) i.MX 8MM driver.

   - AT91 SAM9X60 subdriver.

  Improvements:

   - Support for external interrups (EINT) on Mediatek virtual GPIOs.

   - Make BCM2835 pin config fully generic.

   - Lots of Renesas SH-PFC incremental improvements"

* tag 'pinctrl-v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (70 commits)
  pinctrl: imx: fix scu link errors
  dt-bindings: pinctrl: Document the i.MX50 IOMUXC binding
  pinctrl: qcom: spmi-gpio: Reorder debug print
  pinctrl: nomadik: fix possible object reference leak
  pinctrl: stm32: return error upon hwspinlock failure
  pinctrl: stm32: fix memory leak issue
  pinctrl: sh-pfc: r8a77965: Add DRIF pins, groups and functions
  pinctrl: sh-pfc: r8a77965: Add TMU pins, groups and functions
  pinctrl: sh-pfc: Validate fixed-size field widths at build time
  pinctrl: sh-pfc: sh73a0: Fix fsic_spdif pin groups
  pinctrl: sh-pfc: r8a7792: Fix vin1_data18_b pin group
  pinctrl: sh-pfc: r8a7791: Fix scifb2_data_c pin group
  pinctrl: sh-pfc: emev2: Add missing pinmux functions
  pinctrl: sunxi: Support I/O bias voltage setting on A80
  pinctrl: ingenic: Add LCD pins for the JZ4725B SoC
  pinctrl: samsung: Remove legacy API for handling external wakeup interrupts mask
  pinctrl: bcm2835: Direct GPIO config changes to generic pinctrl
  pinctrl: bcm2835: declare pin config as generic
  pinctrl: qcom: qcs404: Drop unused UFS_RESET macro
  dt-bindings: add documentation for slew rate
  ...

Pull input updates from Dmitry Torokhov:

 - update the ili210x touchscreen driver, refreshing the code and adding
   support for ILI251X line

 - add support for st1633 to the st1232 touchscreen driver

 - add support for sx8650 to the the sx8654 touchscreen driver

 - add support for Evervision FT5726 to the edt-ft5x06 touchscreen
   driver

 - add support for gt5688 to the Goodix touchscreen driver

 - new vibrator driver for MSM SOCs

 - miscellaneous fixes for the rest of input drivers

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (53 commits)
  Input: wacom_serial4 - add support for Wacom ArtPad II tablet
  Input: elan_i2c - add id for touchpad found in Lenovo s21e-20
  Input: raspberrypi-ts - select CONFIG_INPUT_POLLDEV
  Input: msm-vibrator - use correct gpio header
  Input: ti_am335x_tsc - remove set but not used variable 'tscadc_dev'
  Input: i8042 - rework DT node name comparisons
  Input: goodix - print values in case of inconsistencies
  Input: goodix - refer to touchscreen.txt in device tree bindings
  Input: goodix - support Goodix gt5688
  Input: synaptics_i2c - remove redundant spinlock
  Input: db9 - mark expected switch fall-through
  Input: qt2160 - remove redundant spinlock
  Input: st1232 - handle common DT bindings
  Input: ims-pcu - switch to using brightness_set_blocking()
  Input: st1232 - switch to gpiod API
  Input: ili210x - fetch touchscreen geometry from DT
  Input: msm-vibrator - tweak an error message
  Input: tm2-touchkey - acknowledge that setting brightness is a blocking call
  Input: stmfts - acknowledge that setting brightness is a blocking call
  Input: ili210x - switch to using devm_device_add_group()
  ...

Several of these scripts have come in as old-fashioned patches, and in
the process lost the executable bit.  In most cases it doesn't matter,
since the test infrastructure will explicitly execute them using the
proper shell interpreter, but at least in the case of the new vmalloc
test, the lack of execurable bit caused the test to fail with

    ./run_vmtests: line 217: ./test_vmalloc.sh: Permission denied

because of the lacking exectuable permissions bit.

This patch fixes that up.

NOTE! A simple script to look for non-executable scripts in the kernel,
something like

    git ls-files --stage -- '*.sh' |
        grep 100644 |
        cut -f2 |
        xargs grep -l '#!'

will show that there's a lot of other files that _look_ like executable
shell scripts, but don't have the executable bit set.  I considered just
scripting them all to be executable, but since it looks like the common
pattern is to not really require it, I'm just doing the minimal fix as
pointed out by the kernel test robot.

Fixes: a05ef00c ("selftests/vm: add script helper for CONFIG_TEST_VMALLOC_MODULE")
Reported-by: kernel test robot <rong.a.chen@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Uladzislau Rezki <urezki@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull IDE updates from David Miller:
 "Nothing super exciting as usual:

  1) Switch fallthrus from Gustavo A. R. Silva

  2) Kconfig formatting cleanup from Enrico Weigelt

  3) OF interface adjustment from Rob Herring"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide:
  drivers: ide: Kconfig: pedantic formatting
  ide: mark expected switch fall-through
  ide: hpt366: mark expected switch fall-throughs
  ide: Use of_node_name_eq for node name comparisons

Pull networking fixes from David Miller:
 "First batch of fixes in the new merge window:

   1) Double dst_cache free in act_tunnel_key, from Wenxu.

   2) Avoid NULL deref in IN_DEV_MFORWARD() by failing early in the
      ip_route_input_rcu() path, from Paolo Abeni.

   3) Fix appletalk compile regression, from Arnd Bergmann.

   4) If SLAB objects reach the TCP sendpage method we are in serious
      trouble, so put a debugging check there. From Vasily Averin.

   5) Memory leak in hsr layer, from Mao Wenan.

   6) Only test GSO type on GSO packets, from Willem de Bruijn.

   7) Fix crash in xsk_diag_put_umem(), from Eric Dumazet.

   8) Fix VNIC mailbox length in nfp, from Dirk van der Merwe.

   9) Fix race in ipv4 route exception handling, from Xin Long.

  10) Missing DMA memory barrier in hns3 driver, from Jian Shen.

  11) Use after free in __tcf_chain_put(), from Vlad Buslov.

  12) Handle inet_csk_reqsk_queue_add() failures, from Guillaume Nault.

  13) Return value correction when ip_mc_may_pull() fails, from Eric
      Dumazet.

  14) Use after free in x25_device_event(), also from Eric"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (72 commits)
  gro_cells: make sure device is up in gro_cells_receive()
  vxlan: test dev->flags & IFF_UP before calling gro_cells_receive()
  net/x25: fix use-after-free in x25_device_event()
  isdn: mISDNinfineon: fix potential NULL pointer dereference
  net: hns3: fix to stop multiple HNS reset due to the AER changes
  ip: fix ip_mc_may_pull() return value
  net: keep refcount warning in reqsk_free()
  net: stmmac: Avoid one more sometimes uninitialized Clang warning
  net: dsa: mv88e6xxx: Set correct interface mode for CPU/DSA ports
  rxrpc: Fix client call queueing, waiting for channel
  tcp: handle inet_csk_reqsk_queue_add() failures
  net: ethernet: sun: Zero initialize class in default case in niu_add_ethtool_tcam_entry
  8139too : Add support for U.S. Robotics USR997901A 10/100 Cardbus NIC
  fou, fou6: avoid uninit-value in gue_err() and gue6_err()
  net: sched: fix potential use-after-free in __tcf_chain_put()
  vhost: silence an unused-variable warning
  vsock/virtio: fix kernel panic from virtio_transport_reset_no_sock
  connector: fix unsafe usage of ->real_parent
  vxlan: do not need BH again in vxlan_cleanup()
  net: hns3: add dma_rmb() for rx description
  ...

Pull Kbuild updates from Masahiro Yamada:

 - do not generate unneeded top-level built-in.a

 - let git ignore O= directory entirely

 - optimize scripts/kallsyms slightly

 - exclude DWARF info from *.s regardless of config options

 - fix GCC toolchain search path for Clang to prepare ld.lld support

 - do not generate modules.order when CONFIG_MODULES is disabled

 - simplify single target rules and remove VPATH for external module
   build

 - allow to add optional flags to dpkg-buildpackage when building
   deb-pkg

 - move some compiler option tests from Makefile to Kconfig

 - various Makefile cleanups

* tag 'kbuild-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (40 commits)
  kbuild: remove scripts/basic/% build target
  kbuild: use -Werror=implicit-... instead of -Werror-implicit-...
  kbuild: clean up scripts/gcc-version.sh
  kbuild: remove cc-version macro
  kbuild: update comment block of scripts/clang-version.sh
  kbuild: remove commented-out INITRD_COMPRESS
  kbuild: move -gsplit-dwarf, -gdwarf-4 option tests to Kconfig
  kbuild: [bin]deb-pkg: add DPKG_FLAGS variable
  kbuild: move ".config not found!" message from Kconfig to Makefile
  kbuild: invoke syncconfig if include/config/auto.conf.cmd is missing
  kbuild: simplify single target rules
  kbuild: remove empty rules for makefiles
  kbuild: make -r/-R effective in top Makefile for old Make versions
  kbuild: move tools_silent to a more relevant place
  kbuild: compute false-positive -Wmaybe-uninitialized cases in Kconfig
  kbuild: refactor cc-cross-prefix implementation
  kbuild: hardcode genksyms path and remove GENKSYMS variable
  scripts/gdb: refactor rules for symlink creation
  kbuild: create symlink to vmlinux-gdb.py in scripts_gdb target
  scripts/gdb: do not descend into scripts/gdb from scripts
  ...

Pull tpm updates from James Morris:

 - Clean up the transmission flow

   Cleaned up the whole transmission flow. Locking of the chip is now
   done in the level of tpm_try_get_ops() and tpm_put_ops() instead
   taking the chip lock inside tpm_transmit(). The nested calls inside
   tpm_transmit(), used with the resource manager, have been refactored
   out.

   Should make easier to perform more complex transactions with the TPM
   without making the subsystem a bigger mess (e.g. encrypted channel
   patches by James Bottomley).

 - PPI 1.3 support

   TPM PPI 1.3 introduces an additional optional command parameter that
   may be needed for some commands. Display the parameter if the command
   requires such a parameter. Only command 23 (SetPCRBanks) needs one.

   The PPI request file will show output like this then:

      # echo "23 16" > request
      # cat request
      23 16

      # echo "5" > request
      # cat request
      5

 - Extend all PCR banks in IMA

   Instead of static PCR banks array, the array of available PCR banks
   is now allocated dynamically. The digests sizes are determined
   dynamically using a probe PCR read without relying crypto's static
   list of hash algorithms.

   This should finally make sealing of measurements in IMA safe and
   secure.

 - TPM 2.0 selftests

   Added a test suite to tools/testing/selftests/tpm2 previously outside
   of the kernel tree: https://github.com/jsakkine-intel/tpm2-scripts

* 'next-tpm' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (37 commits)
  tpm/ppi: Enable submission of optional command parameter for PPI 1.3
  tpm/ppi: Possibly show command parameter if TPM PPI 1.3 is used
  tpm/ppi: Display up to 101 operations as define for version 1.3
  tpm/ppi: rename TPM_PPI_REVISION_ID to TPM_PPI_REVISION_ID_1
  tpm/ppi: pass function revision ID to tpm_eval_dsm()
  tpm: pass an array of tpm_extend_digest structures to tpm_pcr_extend()
  KEYS: trusted: explicitly use tpm_chip structure from tpm_default_chip()
  tpm: move tpm_chip definition to include/linux/tpm.h
  tpm: retrieve digest size of unknown algorithms with PCR read
  tpm: rename and export tpm2_digest and tpm2_algorithms
  tpm: dynamically allocate the allocated_banks array
  tpm: remove @flags from tpm_transmit()
  tpm: take TPM chip power gating out of tpm_transmit()
  tpm: introduce tpm_chip_start() and tpm_chip_stop()
  tpm: remove TPM_TRANSMIT_UNLOCKED flag
  tpm: use tpm_try_get_ops() in tpm-sysfs.c.
  tpm: remove @space from tpm_transmit()
  tpm: move TPM space code out of tpm_transmit()
  tpm: move tpm_validate_commmand() to tpm2-space.c
  tpm: clean up tpm_try_transmit() error handling flow
  ...

Merge branch 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security

Pull integrity updates from James Morris:
 "Mimi Zohar says:

   'Linux 5.0 introduced the platform keyring to allow verifying the IMA
    kexec kernel image signature using the pre-boot keys. This pull
    request similarly makes keys on the platform keyring accessible for
    verifying the PE kernel image signature.

    Also included in this pull request is a new IMA hook that tags tmp
    files, in policy, indicating the file hash needs to be calculated.
    The remaining patches are cleanup'"

* 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  evm: Use defined constant for UUID representation
  ima: define ima_post_create_tmpfile() hook and add missing call
  evm: remove set but not used variable 'xattr'
  encrypted-keys: fix Opt_err/Opt_error = -1
  kexec, KEYS: Make use of platform keyring for signature verify
  integrity, KEYS: add a reference to platform keyring

Pull perf updates from Thomas Gleixner:
 "Perf updates and fixes:

  Kernel:
   - Handle events which have the bpf_event attribute set as side band
     events as they carry information about BPF programs.
   - Add missing switch-case fall-through comments

  Libraries:
   - Fix leaks and double frees in error code paths.
   - Prevent buffer overflows in libtraceevent

  Tools:
   - Improvements in handling Intel BT/PTS
   - Add BTF ELF markers to perf trace BPF programs to improve output
   - Support --time, --cpu, --pid and --tid filters for perf diff
   - Calculate the column width in perf annotate as the hardcoded 6
     characters for the instruction are not sufficient
   - Small fixes all over the place"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (38 commits)
  perf/core: Mark expected switch fall-through
  perf/x86/intel/uncore: Fix client IMC events return huge result
  perf/ring_buffer: Use high order allocations for AUX buffers optimistically
  perf data: Force perf_data__open|close zero data->file.path
  perf session: Fix double free in perf_data__close
  perf evsel: Probe for precise_ip with simple attr
  perf tools: Read and store caps/max_precise in perf_pmu
  perf hist: Fix memory leak of srcline
  perf hist: Add error path into hist_entry__init
  perf c2c: Fix c2c report for empty numa node
  perf script python: Add Python3 support to intel-pt-events.py
  perf script python: Add Python3 support to event_analyzing_sample.py
  perf script python: add Python3 support to check-perf-trace.py
  perf script python: Add Python3 support to futex-contention.py
  perf script python: Remove mixed indentation
  perf diff: Support --pid/--tid filter options
  perf diff: Support --cpu filter option
  perf diff: Support --time filter option
  perf thread: Generalize function to copy from thread addr space from intel-bts code
  perf annotate: Calculate the max instruction name, align column to that
  ...

Pull x86 fixes from Thomas Gleixner:
 "A set of fixes for x86:

   - Make the unwinder more robust when it encounters a NULL pointer
     call, so the backtrace becomes more useful

   - Fix the bogus ORC unwind table alignment

   - Prevent kernel panic during kexec on HyperV caused by a cleared but
     not disabled hypercall page.

   - Remove the now pointless stacksize increase for KASAN_EXTRA, as
     KASAN_EXTRA is gone.

   - Remove unused variables from the x86 memory management code"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/hyperv: Fix kernel panic when kexec on HyperV
  x86/mm: Remove unused variable 'old_pte'
  x86/mm: Remove unused variable 'cpu'
  Revert "x86_64: Increase stack size for KASAN_EXTRA"
  x86/unwind: Add hardcoded ORC entry for NULL
  x86/unwind: Handle NULL pointer calls better in frame unwinder
  x86/unwind/orc: Fix ORC unwind table alignment

Pull x86 boot fix from Thomas Gleixner:
 "A trivial fix for the previous x86/boot pull request which did not
  make it in time"

* 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/boot/KASLR: Always return a value from process_mem_region

Pull timer fix from Thomas Gleixner:
 "A single fix to prevent a unmet dependencies warning in Kconfig"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  time: Make VIRT_CPU_ACCOUNTING_GEN depend on GENERIC_CLOCKEVENTS

Pull locking fixes from Thomas Gleixner:
 "A few fixes for lockdep:

   - initialize lockdep internal RCU head after initializing RCU

   - prevent use after free in a alloc_workqueue() error handling path

   - plug a memory leak in the workqueue core which fails to free a
     dynamically allocated lock name.

   - make Clang happy"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  workqueue, lockdep: Fix a memory leak in wq->lock_name
  workqueue, lockdep: Fix an alloc_workqueue() error path
  locking/lockdep: Only call init_rcu_head() after RCU has been initialized
  locking/lockdep: Avoid a Clang warning

Pull watchdog core update from Thomas Gleixner:
 "A single commit adding a command line parameter which allows to set
  the watchdog threshold on the kernel command-line, so kernels with
  massive debug facilities enabled won't trigger the watchdog during
  early boot and before the threshold can be changed via sysctl"

* 'core-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  watchdog/core: Add watchdog_thresh command line parameter

Pull x86 platform driver updates from Darren Hart:

 - use MODULE_DEVICE_TABLE across several wmi drivers, keeping
   wmi_device_id and MODULE_ALIAS() declarations in sync

 - add several Ideapad models to the no_hw_rfkill list

 - add support for new Mellanox platforms, including new fan and LED
   functionality

 - address Dell keyboard backlight change event and power button release
   issues

 - update dell_rbu to use appropriate memory allocation mechanisms

 - several small fixes and Ice Lake support for intel_pmc_core

 - fix a suspend regression for Cherry Trail based devices in
   intel_int0002_vgpio

 - a few other routine fixes

* tag 'platform-drivers-x86-v5.1-1' of git://git.infradead.org/linux-platform-drivers-x86: (50 commits)
  MAINTAINERS: Include mlxreg.h in Mellanox Platform Driver files
  platform/x86: ideapad-laptop: Add S130-14IGM to no_hw_rfkill list
  platform/x86: mlx-platform: Fix access mode for fan_dir attribute
  platform/x86: mlx-platform: Add UID LED for the next generation systems
  platform/x86: mlx-platform: Add extra CPLD for next generation systems
  platform/x86: wmi-bmof: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
  platform/x86: intel-wmi-thunderbolt: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
  platform/x86: huawei-wmi: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
  platform/x86: dell-wmi: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
  platform/x86: dell-wmi-descriptor: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
  platform/x86: dell-smbios-wmi: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
  platform/x86: wmi: add WMI support to MODULE_DEVICE_TABLE()
  platform/x86: wmi: move struct wmi_device_id to mod_devicetable.h
  modpost: file2alias: define size of alias
  platform/x86: touchscreen_dmi: Add info for the CHUWI Hi10 Air tablet
  platform/x86: ideapad-laptop: Add Ideapad 530S-14ARR to no_hw_rfkill list
  platform/x86: ideapad-laptop: Add Yoga C930 to no_hw_rfkill_list
  platform/x86: intel_pmc_core: Quirk to ignore XTAL shutdown
  platform/x86: intel_pmc_core: Add Package cstates residency info
  platform/x86: intel_pmc_core: Add ICL platform support
  ...

Pull virtio updates from Michael Tsirkin:
 "Several fixes, most notably fix for virtio on swiotlb systems"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  vhost: silence an unused-variable warning
  virtio: hint if callbacks surprisingly might sleep
  virtio-ccw: wire up ->bus_name callback
  s390/virtio: handle find on invalid queue gracefully
  virtio-ccw: diag 500 may return a negative cookie
  virtio_balloon: remove the unnecessary 0-initialization
  virtio-balloon: improve update_balloon_size_func
  virtio-blk: Consider virtio_max_dma_size() for maximum segment size
  virtio: Introduce virtio_max_dma_size()
  dma: Introduce dma_max_mapping_size()
  swiotlb: Add is_swiotlb_active() function
  swiotlb: Introduce swiotlb_max_mapping_size()

Pull IOMMU updates from Joerg Roedel:

 - A big cleanup and optimization patch-set for the Tegra GART driver

 - Documentation updates and fixes for the IOMMU-API

 - Support for page request in Intel VT-d scalable mode

 - Intel VT-d dma_[un]map_resource() support

 - Updates to the ATS enabling code for PCI (acked by Bjorn) and Intel
   VT-d to align with the latest version of the ATS spec

 - Relaxed IRQ source checking in the Intel VT-d driver for some aliased
   devices, needed for future devices which send IRQ messages from more
   than on request-ID

 - IRQ remapping driver for Hyper-V

 - Patches to make generic IOVA and IO-Page-Table code usable outside of
   the IOMMU code

 - Various other small fixes and cleanups

* tag 'iommu-updates-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (60 commits)
  iommu/vt-d: Get domain ID before clear pasid entry
  iommu/vt-d: Fix NULL pointer reference in intel_svm_bind_mm()
  iommu/vt-d: Set context field after value initialized
  iommu/vt-d: Disable ATS support on untrusted devices
  iommu/mediatek: Fix semicolon code style issue
  MAINTAINERS: Add Hyper-V IOMMU driver into Hyper-V CORE AND DRIVERS scope
  iommu/hyper-v: Add Hyper-V stub IOMMU driver
  x86/Hyper-V: Set x2apic destination mode to physical when x2apic is available
  PCI/ATS: Add inline to pci_prg_resp_pasid_required()
  iommu/vt-d: Check identity map for hot-added devices
  iommu: Fix IOMMU debugfs fallout
  iommu: Document iommu_ops.is_attach_deferred()
  iommu: Document iommu_ops.iotlb_sync_map()
  iommu/vt-d: Enable ATS only if the device uses page aligned address.
  PCI/ATS: Add pci_ats_page_aligned() interface
  iommu/vt-d: Fix PRI/PASID dependency issue.
  PCI/ATS: Add pci_prg_resp_pasid_required() interface.
  iommu/vt-d: Allow interrupts from the entire bus for aliased devices
  iommu/vt-d: Add helper to set an IRTE to verify only the bus number
  iommu: Fix flush_tlb_all typo
  ...

Pull DMA mapping updates from Christoph Hellwig:

 - add debugfs support for dumping dma-debug information (Corentin
   Labbe)

 - Kconfig cleanups (Andy Shevchenko and me)

 - debugfs cleanups (Greg Kroah-Hartman)

 - improve dma_map_resource and use it in the media code

 - arch_setup_dma_ops / arch_teardown_dma_ops cleanups

 - various small cleanups and improvements for the per-device coherent
   allocator

 - make the DMA mask an upper bound and don't fail "too large" dma mask
   in the remaning two architectures - this will allow big driver
   cleanups in the following merge windows

* tag 'dma-mapping-5.1' of git://git.infradead.org/users/hch/dma-mapping: (21 commits)
  Documentation/DMA-API-HOWTO: update dma_mask sections
  sparc64/pci_sun4v: allow large DMA masks
  sparc64/iommu: allow large DMA masks
  sparc64: refactor the ali DMA quirk
  ccio: allow large DMA masks
  dma-mapping: remove the DMA_MEMORY_EXCLUSIVE flag
  dma-mapping: remove dma_mark_declared_memory_occupied
  dma-mapping: move CONFIG_DMA_CMA to kernel/dma/Kconfig
  dma-mapping: improve selection of dma_declare_coherent availability
  dma-mapping: remove an incorrect __iommem annotation
  of: select OF_RESERVED_MEM automatically
  device.h: dma_mem is only needed for HAVE_GENERIC_DMA_COHERENT
  mfd/sm501: depend on HAS_DMA
  dma-mapping: add a kconfig symbol for arch_teardown_dma_ops availability
  dma-mapping: add a kconfig symbol for arch_setup_dma_ops availability
  dma-mapping: move debug configuration options to kernel/dma
  dma-debug: add dumping facility via debugfs
  dma: debug: no need to check return value of debugfs_create functions
  videobuf2: replace a layering violation with dma_map_resource
  dma-mapping: don't BUG when calling dma_map_resource on RAM
  ...

Formatting of Kconfig files doesn't look so pretty, so just
take a damp cloth and clean it up.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.

This patch fixes the following warning:

drivers/ide/ide-floppy.c: In function ‘ide_floppy_get_capacity’:
drivers/ide/ide-floppy.c:424:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
    if (!(drive->atapi_flags & IDE_AFLAG_CLIK_DRIVE))
       ^
drivers/ide/ide-floppy.c:431:3: note: here
   case CAPACITY_CURRENT:
   ^~~~

Warning level 3 was used: -Wimplicit-fallthrough=3

Notice that, in this particular case, the code comment is modified
in accordance with what GCC is expecting to find.

This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

Notice that, in this particular case, I removed the "else: "
part from the comment. As we are now using Warning level 3:
-Wimplicit-fallthrough=3, this is what GCC is expecting to
find.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We keep receiving syzbot reports [1] that show that tunnels do not play
the rcu/IFF_UP rules properly.

At device dismantle phase, gro_cells_destroy() will be called
only after a full rcu grace period is observed after IFF_UP
has been cleared.

This means that IFF_UP needs to be tested before queueing packets
into netif_rx() or gro_cells.

This patch implements the test in gro_cells_receive() because
too many callers do not seem to bother enough.

[1]
BUG: unable to handle kernel paging request at fffff4ca0b9ffffe
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 21 Comm: kworker/u4:1 Not tainted 5.0.0+ #97
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: netns cleanup_net
RIP: 0010:__skb_unlink include/linux/skbuff.h:1929 [inline]
RIP: 0010:__skb_dequeue include/linux/skbuff.h:1945 [inline]
RIP: 0010:__skb_queue_purge include/linux/skbuff.h:2656 [inline]
RIP: 0010:gro_cells_destroy net/core/gro_cells.c:89 [inline]
RIP: 0010:gro_cells_destroy+0x19d/0x360 net/core/gro_cells.c:78
Code: 03 42 80 3c 20 00 0f 85 53 01 00 00 48 8d 7a 08 49 8b 47 08 49 c7 07 00 00 00 00 48 89 f9 49 c7 47 08 00 00 00 00 48 c1 e9 03 <42> 80 3c 21 00 0f 85 10 01 00 00 48 89 c1 48 89 42 08 48 c1 e9 03
RSP: 0018:ffff8880aa3f79a8 EFLAGS: 00010a02
RAX: 00ffffffffffffe8 RBX: ffffe8ffffc64b70 RCX: 1ffff8ca0b9ffffe
RDX: ffffc6505cffffe8 RSI: ffffffff858410ca RDI: ffffc6505cfffff0
RBP: ffff8880aa3f7a08 R08: ffff8880aa3e8580 R09: fffffbfff1263645
R10: fffffbfff1263644 R11: ffffffff8931b223 R12: dffffc0000000000
R13: 0000000000000000 R14: ffffe8ffffc64b80 R15: ffffe8ffffc64b75
kobject: 'loop2' (000000004bd7d84a): kobject_uevent_env
FS:  0000000000000000(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: fffff4ca0b9ffffe CR3: 0000000094941000 CR4: 00000000001406f0
Call Trace:
kobject: 'loop2' (000000004bd7d84a): fill_kobj_path: path = '/devices/virtual/block/loop2'
 ip_tunnel_dev_free+0x19/0x60 net/ipv4/ip_tunnel.c:1010
 netdev_run_todo+0x51c/0x7d0 net/core/dev.c:8970
 rtnl_unlock+0xe/0x10 net/core/rtnetlink.c:116
 ip_tunnel_delete_nets+0x423/0x5f0 net/ipv4/ip_tunnel.c:1124
 vti_exit_batch_net+0x23/0x30 net/ipv4/ip_vti.c:495
 ops_exit_list.isra.0+0x105/0x160 net/core/net_namespace.c:156
 cleanup_net+0x3fb/0x960 net/core/net_namespace.c:551
 process_one_work+0x98e/0x1790 kernel/workqueue.c:2173
 worker_thread+0x98/0xe40 kernel/workqueue.c:2319
 kthread+0x357/0x430 kernel/kthread.c:246
 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352
Modules linked in:
CR2: fffff4ca0b9ffffe
   [ end trace 513fc9c1338d1cb3 ]
RIP: 0010:__skb_unlink include/linux/skbuff.h:1929 [inline]
RIP: 0010:__skb_dequeue include/linux/skbuff.h:1945 [inline]
RIP: 0010:__skb_queue_purge include/linux/skbuff.h:2656 [inline]
RIP: 0010:gro_cells_destroy net/core/gro_cells.c:89 [inline]
RIP: 0010:gro_cells_destroy+0x19d/0x360 net/core/gro_cells.c:78
Code: 03 42 80 3c 20 00 0f 85 53 01 00 00 48 8d 7a 08 49 8b 47 08 49 c7 07 00 00 00 00 48 89 f9 49 c7 47 08 00 00 00 00 48 c1 e9 03 <42> 80 3c 21 00 0f 85 10 01 00 00 48 89 c1 48 89 42 08 48 c1 e9 03
RSP: 0018:ffff8880aa3f79a8 EFLAGS: 00010a02
RAX: 00ffffffffffffe8 RBX: ffffe8ffffc64b70 RCX: 1ffff8ca0b9ffffe
RDX: ffffc6505cffffe8 RSI: ffffffff858410ca RDI: ffffc6505cfffff0
RBP: ffff8880aa3f7a08 R08: ffff8880aa3e8580 R09: fffffbfff1263645
R10: fffffbfff1263644 R11: ffffffff8931b223 R12: dffffc0000000000
kobject: 'loop3' (00000000e4ee57a6): kobject_uevent_env
R13: 0000000000000000 R14: ffffe8ffffc64b80 R15: ffffe8ffffc64b75
FS:  0000000000000000(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: fffff4ca0b9ffffe CR3: 0000000094941000 CR4: 00000000001406f0

Fixes: c9e6bc64 ("net: add gro_cells infrastructure")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Same reasons than the ones explained in commit 4179cb5a
("vxlan: test dev->flags & IFF_UP before calling netif_rx()")

netif_rx() or gro_cells_receive() must be called under a strict contract.

At device dismantle phase, core networking clears IFF_UP
and flush_all_backlogs() is called after rcu grace period
to make sure no incoming packet might be in a cpu backlog
and still referencing the device.

A similar protocol is used for gro_cells infrastructure, as
gro_cells_destroy() will be called only after a full rcu
grace period is observed after IFF_UP has been cleared.

Most drivers call netif_rx() from their interrupt handler,
and since the interrupts are disabled at device dismantle,
netif_rx() does not have to check dev->flags & IFF_UP

Virtual drivers do not have this guarantee, and must
therefore make the check themselves.

Otherwise we risk use-after-free and/or crashes.

Fixes: d342894c ("vxlan: virtual extensible lan")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In case of failure x25_connect() does a x25_neigh_put(x25->neighbour)
but forgets to clear x25->neighbour pointer, thus triggering use-after-free.

Since the socket is visible in x25_list, we need to hold x25_list_lock
to protect the operation.

syzbot report :

BUG: KASAN: use-after-free in x25_kill_by_device net/x25/af_x25.c:217 [inline]
BUG: KASAN: use-after-free in x25_device_event+0x296/0x2b0 net/x25/af_x25.c:252
Read of size 8 at addr ffff8880a030edd0 by task syz-executor003/7854

CPU: 0 PID: 7854 Comm: syz-executor003 Not tainted 5.0.0+ #97
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x172/0x1f0 lib/dump_stack.c:113
 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187
 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317
 __asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:135
 x25_kill_by_device net/x25/af_x25.c:217 [inline]
 x25_device_event+0x296/0x2b0 net/x25/af_x25.c:252
 notifier_call_chain+0xc7/0x240 kernel/notifier.c:93
 __raw_notifier_call_chain kernel/notifier.c:394 [inline]
 raw_notifier_call_chain+0x2e/0x40 kernel/notifier.c:401
 call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1739
 call_netdevice_notifiers_extack net/core/dev.c:1751 [inline]
 call_netdevice_notifiers net/core/dev.c:1765 [inline]
 __dev_notify_flags+0x1e9/0x2c0 net/core/dev.c:7607
 dev_change_flags+0x10d/0x170 net/core/dev.c:7643
 dev_ifsioc+0x2b0/0x940 net/core/dev_ioctl.c:237
 dev_ioctl+0x1b8/0xc70 net/core/dev_ioctl.c:488
 sock_do_ioctl+0x1bd/0x300 net/socket.c:995
 sock_ioctl+0x32b/0x610 net/socket.c:1096
 vfs_ioctl fs/ioctl.c:46 [inline]
 file_ioctl fs/ioctl.c:509 [inline]
 do_vfs_ioctl+0xd6e/0x1390 fs/ioctl.c:696
 ksys_ioctl+0xab/0xd0 fs/ioctl.c:713
 __do_sys_ioctl fs/ioctl.c:720 [inline]
 __se_sys_ioctl fs/ioctl.c:718 [inline]
 __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718
 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x4467c9
Code: e8 0c e8 ff ff 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 5b 07 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fdbea222d98 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00000000006dbc58 RCX: 00000000004467c9
RDX: 0000000020000340 RSI: 0000000000008914 RDI: 0000000000000003
RBP: 00000000006dbc50 R08: 00007fdbea223700 R09: 0000000000000000
R10: 00007fdbea223700 R11: 0000000000000246 R12: 00000000006dbc5c
R13: 6000030030626669 R14: 0000000000000000 R15: 0000000030626669

Allocated by task 7843:
 save_stack+0x45/0xd0 mm/kasan/common.c:73
 set_track mm/kasan/common.c:85 [inline]
 __kasan_kmalloc mm/kasan/common.c:495 [inline]
 __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:468
 kasan_kmalloc+0x9/0x10 mm/kasan/common.c:509
 kmem_cache_alloc_trace+0x151/0x760 mm/slab.c:3615
 kmalloc include/linux/slab.h:545 [inline]
 x25_link_device_up+0x46/0x3f0 net/x25/x25_link.c:249
 x25_device_event+0x116/0x2b0 net/x25/af_x25.c:242
 notifier_call_chain+0xc7/0x240 kernel/notifier.c:93
 __raw_notifier_call_chain kernel/notifier.c:394 [inline]
 raw_notifier_call_chain+0x2e/0x40 kernel/notifier.c:401
 call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1739
 call_netdevice_notifiers_extack net/core/dev.c:1751 [inline]
 call_netdevice_notifiers net/core/dev.c:1765 [inline]
 __dev_notify_flags+0x121/0x2c0 net/core/dev.c:7605
 dev_change_flags+0x10d/0x170 net/core/dev.c:7643
 dev_ifsioc+0x2b0/0x940 net/core/dev_ioctl.c:237
 dev_ioctl+0x1b8/0xc70 net/core/dev_ioctl.c:488
 sock_do_ioctl+0x1bd/0x300 net/socket.c:995
 sock_ioctl+0x32b/0x610 net/socket.c:1096
 vfs_ioctl fs/ioctl.c:46 [inline]
 file_ioctl fs/ioctl.c:509 [inline]
 do_vfs_ioctl+0xd6e/0x1390 fs/ioctl.c:696
 ksys_ioctl+0xab/0xd0 fs/ioctl.c:713
 __do_sys_ioctl fs/ioctl.c:720 [inline]
 __se_sys_ioctl fs/ioctl.c:718 [inline]
 __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718
 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 7865:
 save_stack+0x45/0xd0 mm/kasan/common.c:73
 set_track mm/kasan/common.c:85 [inline]
 __kasan_slab_free+0x102/0x150 mm/kasan/common.c:457
 kasan_slab_free+0xe/0x10 mm/kasan/common.c:465
 __cache_free mm/slab.c:3494 [inline]
 kfree+0xcf/0x230 mm/slab.c:3811
 x25_neigh_put include/net/x25.h:253 [inline]
 x25_connect+0x8d8/0xde0 net/x25/af_x25.c:824
 __sys_connect+0x266/0x330 net/socket.c:1685
 __do_sys_connect net/socket.c:1696 [inline]
 __se_sys_connect net/socket.c:1693 [inline]
 __x64_sys_connect+0x73/0xb0 net/socket.c:1693
 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

The buggy address belongs to the object at ffff8880a030edc0
 which belongs to the cache kmalloc-256 of size 256
The buggy address is located 16 bytes inside of
 256-byte region [ffff8880a030edc0, ffff8880a030eec0)
The buggy address belongs to the page:
page:ffffea000280c380 count:1 mapcount:0 mapping:ffff88812c3f07c0 index:0x0
flags: 0x1fffc0000000200(slab)
raw: 01fffc0000000200 ffffea0002806788 ffffea00027f0188 ffff88812c3f07c0
raw: 0000000000000000 ffff8880a030e000 000000010000000c 0000000000000000
page dumped because: kasan: bad access detected
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot+04babcefcd396fabec37@syzkaller.appspotmail.com
Cc: andrew hendry <andrew.hendry@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull Devicetree updates from Rob Herring:

 - Fix a unittest failure on UML. Preparation for converting to kunit
   test framework.

 - Add annotations to dtx_diff output

 - Fix unittest reporting of expected error

 - Move DMA configuration for virtual devices into the driver that needs
   it (s5p-mfc)

 - Vendor prefixes for feiyang and techstar

 - Convert ARM GIC, GICv3, and L2x0 to DT schema

 - Add r8a7778/9 HSCIF serial bindings

* tag 'devicetree-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  of: unittest: unflatten device tree on UML when testing
  dt-bindings: Add vendor prefix for feiyang
  dt-bindings: Add vendor prefix for techstar
  dt-bindings: display: add missing semicolon in example
  of: mark early_init_dt_alloc_reserved_memory_arch static
  of: add dtc annotations functionality to dtx_diff
  of: unittest: add caution to function header comment
  of: unittest: remove report of expected error
  dt-bindings: interrupt-controller: Convert ARM GICv3 to json-schema
  dt-bindings: interrupt-controller: Convert ARM GIC to json-schema
  dt-bindings: arm: l2x0: Convert L2 cache to json-schema
  media: s5p-mfc: Fix memdev DMA configuration
  dt-bindings: serial: sh-sci: Document r8a7778/9 HSCIF bindings

In case ioremap fails, the fix returns -ENOMEM to avoid NULL
pointer dereference.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull arm64 updates from Catalin Marinas:

 - Pseudo NMI support for arm64 using GICv3 interrupt priorities

 - uaccess macros clean-up (unsafe user accessors also merged but
   reverted, waiting for objtool support on arm64)

 - ptrace regsets for Pointer Authentication (ARMv8.3) key management

 - inX() ordering w.r.t. delay() on arm64 and riscv (acks in place by
   the riscv maintainers)

 - arm64/perf updates: PMU bindings converted to json-schema, unused
   variable and misleading comment removed

 - arm64/debug fixes to ensure checking of the triggering exception
   level and to avoid the propagation of the UNKNOWN FAR value into the
   si_code for debug signals

 - Workaround for Fujitsu A64FX erratum 010001

 - lib/raid6 ARM NEON optimisations

 - NR_CPUS now defaults to 256 on arm64

 - Minor clean-ups (documentation/comments, Kconfig warning, unused
   asm-offsets, clang warnings)

 - MAINTAINERS update for list information to the ARM64 ACPI entry

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (54 commits)
  arm64: mmu: drop paging_init comments
  arm64: debug: Ensure debug handlers check triggering exception level
  arm64: debug: Don't propagate UNKNOWN FAR into si_code for debug signals
  Revert "arm64: uaccess: Implement unsafe accessors"
  arm64: avoid clang warning about self-assignment
  arm64: Kconfig.platforms: fix warning unmet direct dependencies
  lib/raid6: arm: optimize away a mask operation in NEON recovery routine
  lib/raid6: use vdupq_n_u8 to avoid endianness warnings
  arm64: io: Hook up __io_par() for inX() ordering
  riscv: io: Update __io_[p]ar() macros to take an argument
  asm-generic/io: Pass result of I/O accessor to __io_[p]ar()
  arm64: Add workaround for Fujitsu A64FX erratum 010001
  arm64: Rename get_thread_info()
  arm64: Remove documentation about TIF_USEDFPU
  arm64: irqflags: Fix clang build warnings
  arm64: Enable the support of pseudo-NMIs
  arm64: Skip irqflags tracing for NMI in IRQs disabled context
  arm64: Skip preemption when exiting an NMI
  arm64: Handle serror in NMI context
  irqchip/gic-v3: Allow interrupts to be set as pseudo-NMI
  ...

Pull nios2 updates from Ley Foon Tan:
 "Most of updates are MMU related"

* tag 'nios2-v5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2:
  nios2: Fix update_mmu_cache preload the TLB with the new PTE
  nios2: update_mmu_cache preload the TLB with the new PTE
  nios2: User address TLB flush break after finding the matching entry
  nios2: flush_tlb_all use TLBMISC way auto-increment feature
  nios2: improve readability of tlb functions
  nios2: flush_tlb_mm flush only the pid
  nios2: flush_tlb_pid can just restore TLBMISC once
  nios2: TLBMISC writes do not require PID bits to be set
  nios2: Use an invalid TLB entry address helper function
  nios2: pte_clear does not need to flush TLB
  nios2: flush_tlb_page use PID based flush
  nios2: update_mmu_cache clear the old entry from the TLB
  nios2: remove redundant 'default n' from Kconfig-s
  nios2: ksyms: Add missing symbol exports

The commit bfcb79fc
("PCI/ERR: Run error recovery callbacks for all affected devices")
affected the non-fatal error recovery logic for the HNS and RDMA devices.
This is because each HNS PF under PCIe bus receive callbacks
from the AER driver when an error is reported for one of the PF.
This causes unwanted PF resets because
the HNS decides which PF to reset based on the reset type set.
The HNS error handling code sets the reset type based on the hw error
type detected.

This patch provides fix for the above issue for the recovery of
the hw errors in the HNS and RDMA devices.

This patch needs backporting to the kernel v5.0+

Fixes: 332fbf57 ("net: hns3: add handling of hw ras errors using new set of commands")
Reported-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ip_mc_may_pull() must return 0 if there is a problem, not an errno.

syzbot reported :

BUG: KASAN: use-after-free in br_ip4_multicast_igmp3_report net/bridge/br_multicast.c:947 [inline]
BUG: KASAN: use-after-free in br_multicast_ipv4_rcv net/bridge/br_multicast.c:1631 [inline]
BUG: KASAN: use-after-free in br_multicast_rcv+0x3cd8/0x4440 net/bridge/br_multicast.c:1741
Read of size 4 at addr ffff88820a4084ee by task syz-executor.2/11183

CPU: 1 PID: 11183 Comm: syz-executor.2 Not tainted 5.0.0+ #14
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x172/0x1f0 lib/dump_stack.c:113
 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187
 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317
 __asan_report_load4_noabort+0x14/0x20 mm/kasan/generic_report.c:131
 br_ip4_multicast_igmp3_report net/bridge/br_multicast.c:947 [inline]
 br_multicast_ipv4_rcv net/bridge/br_multicast.c:1631 [inline]
 br_multicast_rcv+0x3cd8/0x4440 net/bridge/br_multicast.c:1741
 br_handle_frame_finish+0xa3a/0x14c0 net/bridge/br_input.c:108
 br_nf_hook_thresh+0x2ec/0x380 net/bridge/br_netfilter_hooks.c:1005
 br_nf_pre_routing_finish+0x8e2/0x1750 net/bridge/br_netfilter_hooks.c:410
 NF_HOOK include/linux/netfilter.h:289 [inline]
 NF_HOOK include/linux/netfilter.h:283 [inline]
 br_nf_pre_routing+0x7e7/0x13a0 net/bridge/br_netfilter_hooks.c:506
 nf_hook_entry_hookfn include/linux/netfilter.h:119 [inline]
 nf_hook_slow+0xbf/0x1f0 net/netfilter/core.c:511
 nf_hook include/linux/netfilter.h:244 [inline]
 NF_HOOK include/linux/netfilter.h:287 [inline]
 br_handle_frame+0x95b/0x1450 net/bridge/br_input.c:305
 __netif_receive_skb_core+0xa96/0x3040 net/core/dev.c:4902
 __netif_receive_skb_one_core+0xa8/0x1a0 net/core/dev.c:4971
 __netif_receive_skb+0x2c/0x1c0 net/core/dev.c:5083
 netif_receive_skb_internal+0x117/0x660 net/core/dev.c:5186
 netif_receive_skb+0x6e/0x5a0 net/core/dev.c:5261

Fixes: ba5ea614 ("bridge: simplify ip_mc_check_igmp() and ipv6_mc_check_mld() calls")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: David S. Miller <davem@davemloft.net>

As Eric Dumazet said, "We do not have a way to tell if the req was ever
inserted in a hash table, so better play safe.".
Let's remove this comment, so that nobody will be tempted to drop the
WARN_ON_ONCE() line.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'for-5.1/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper updates from Mike Snitzer:

 - Update bio-based DM core to always call blk_queue_split() and update
   DM targets to properly advertise discard limits that
   blk_queue_split() looks at when dtermining to split discard. Whereby
   allowing DM core's own 'split_discard_bios' to be removed.

 - Improve DM cache target to provide support for discard passdown to
   the origin device.

 - Introduce support to directly boot to a DM mapped device from init by
   using dm-mod.create= module param. This eliminates the need for an
   elaborate initramfs that is otherwise needed to create DM devices.

   This feature's implementation has been worked on for quite some time
   (got up to v12) and is of particular interest to Android and other
   more embedded platforms (e.g. ARM).

 - Rate limit errors from the DM integrity target that were identified
   as the cause for recent NMI hangs due to console limitations.

 - Add sanity checks for user input to thin-pool and external snapshot
   creation.

 - Remove some unused leftover kmem caches from when old .request_fn
   request-based support was removed.

 - Various small cleanups and fixes to targets (e.g. typos, needless
   unlikely() annotations, use struct_size(), remove needless
   .direct_access method from dm-snapshot)

* tag 'for-5.1/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm integrity: limit the rate of error messages
  dm snapshot: don't define direct_access if we don't support it
  dm cache: add support for discard passdown to the origin device
  dm writecache: fix typo in name for writeback_wq
  dm: add support to directly boot to a mapped device
  dm thin: add sanity checks to thin-pool and external snapshot creation
  dm block manager: remove redundant unlikely annotation
  dm verity fec: remove redundant unlikely annotation
  dm integrity: remove redundant unlikely annotation
  dm: always call blk_queue_split() in dm_process_bio()
  dm: fix to_sector() for 32bit
  dm switch: use struct_size() in kzalloc()
  dm: remove unused _rq_tio_cache and _rq_cache
  dm: eliminate 'split_discard_bios' flag from DM target interface
  dm: update dm_process_bio() to split bio if in ->make_request_fn()

Pull SCSI updates from James Bottomley:
 "This is mostly update of the usual drivers: arcmsr, qla2xxx, lpfc,
  hisi_sas, target/iscsi and target/core.

  Additionally Christoph refactored gdth as part of the dma changes. The
  major mid-layer change this time is the removal of bidi commands and
  with them the whole of the osd/exofs driver and filesystem. This is a
  major simplification for block and mq in particular"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (240 commits)
  scsi: cxgb4i: validate tcp sequence number only if chip version <= T5
  scsi: cxgb4i: get pf number from lldi->pf
  scsi: core: replace GFP_ATOMIC with GFP_KERNEL in scsi_scan.c
  scsi: mpt3sas: Add missing breaks in switch statements
  scsi: aacraid: Fix missing break in switch statement
  scsi: kill command serial number
  scsi: csiostor: drop serial_number usage
  scsi: mvumi: use request tag instead of serial_number
  scsi: dpt_i2o: remove serial number usage
  scsi: st: osst: Remove negative constant left-shifts
  scsi: ufs-bsg: Allow reading descriptors
  scsi: ufs: Allow reading descriptor via raw upiu
  scsi: ufs-bsg: Change the calling convention for write descriptor
  scsi: ufs: Remove unused device quirks
  Revert "scsi: ufs: disable vccq if it's not needed by UFS device"
  scsi: megaraid_sas: Remove a bunch of set but not used variables
  scsi: clean obsolete return values of eh_timed_out
  scsi: sd: Optimal I/O size should be a multiple of physical block size
  scsi: MAINTAINERS: SCSI initiator and target tweaks
  scsi: fcoe: make use of fip_mode enum complete
  ...

Tablet initially begins communicating at 9600 baud, so this command
should be used to connect to the device:

    $ inputattach --daemon --baud 9600 --wacom_iv /dev/ttyS0

https://github.com/linuxwacom/xf86-input-wacom/issues/40Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Lenovo s21e-20 uses ELAN0601 in its ACPI tables for the Elan touchpad.
Signed-off-by: Vincent Batts <vbatts@hashbangbash.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

When CONFIG_INPUT_POLLDEV is disabled, we get a link error:

drivers/input/touchscreen/raspberrypi-ts.o: In function `rpi_ts_probe':
raspberrypi-ts.c:(.text+0xec): undefined reference to `devm_input_allocate_polled_device'
raspberrypi-ts.c:(.text+0xec): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `devm_input_allocate_polled_device'
raspberrypi-ts.c:(.text+0x19c): undefined reference to `input_register_polled_device'
raspberrypi-ts.c:(.text+0x19c): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `input_register_polled_device'

Select that symbol like we do from the other similar drivers.

Fixes: 0b9f28fe ("Input: add official Raspberry Pi's touchscreen driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

When CONFIG_GPIOLIB is not set, we get a couple of build
errors during test building:

drivers/input/misc/msm-vibrator.c: In function 'msm_vibrator_start':
drivers/input/misc/msm-vibrator.c:79:3: error: implicit declaration of function 'gpiod_set_value_cansleep'; did you mean 'gpio_set_value_cansleep'? [-Werror=implicit-function-declaration]
   gpiod_set_value_cansleep(vibrator->enable_gpio, 1);
   ^~~~~~~~~~~~~~~~~~~~~~~~
   gpio_set_value_cansleep
drivers/input/misc/msm-vibrator.c: In function 'msm_vibrator_probe':
drivers/input/misc/msm-vibrator.c:176:26: error: implicit declaration of function 'devm_gpiod_get'; did you mean 'devm_gpio_free'? [-Werror=implicit-function-declaration]
  vibrator->enable_gpio = devm_gpiod_get(&pdev->dev, "enable",
                          ^~~~~~~~~~~~~~
                          devm_gpio_free
drivers/input/misc/msm-vibrator.c:177:13: error: 'GPIOD_OUT_LOW' undeclared (first use in this function); did you mean 'GPIOF_INIT_LOW'?
             GPIOD_OUT_LOW);
             ^~~~~~~~~~~~~
             GPIOF_INIT_LOW
drivers/input/misc/msm-vibrator.c:177:13: note: each undeclared identifier is reported only once for each function it appears in

This is easy to avoid when we use gpio/consumer.h as the documented interface.

Fixes: 0f681d09 ("Input: add new vibrator driver for various MSM SOCs")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>