- 13 Apr, 2018 40 commits
-
-
Maciej Purski authored
[ Upstream commit 5d389b12 ] Calibration register is used for calculating current register in hardware according to datasheet: current = shunt_volt * calib_register / 2048 (ina 226) current = shunt_volt * calib_register / 4096 (ina 219) Fix calib_register value to 2048 for ina226 and 4096 for ina 219 in order to avoid truncation error and provide best precision allowed by shunt_voltage measurement. Make current scale value follow changes of shunt_resistor from sysfs as calib_register value is now fixed. Power_lsb value should also follow shunt_resistor changes as stated in datasheet: power_lsb = 25 * current_lsb (ina 226) power_lsb = 20 * current_lsb (ina 219) Signed-off-by:
Maciej Purski <m.purski@samsung.com> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Gustavo A. R. Silva authored
[ Upstream commit 63f1e05f ] df->governor is being dereferenced before it is null checked, hence there is a potential null pointer dereference. Notice that df->governor is being null checked at line 1004: if (df->governor) {, which implies it might be null. Fix this by null checking df->governor before dereferencing it. Addresses-Coverity-ID: 1401988 ("Dereference before null check") Fixes: bcf23c79 ("PM / devfreq: Fix available_governor sysfs") Signed-off-by:
Gustavo A. R. Silva <garsilva@embeddedor.com> Reviewed-by:
Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by:
MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by:
-
NeilBrown authored
[ Upstream commit 61647823 ] d_move() will call __d_drop() and then __d_rehash() on the dentry being moved. This creates a small window when the dentry appears to be unhashed. Many tests of d_unhashed() are made under ->d_lock and so are safe from racing with this window, but some aren't. In particular, getcwd() calls d_unlinked() (which calls d_unhashed()) without d_lock protection, so it can race. This races has been seen in practice with lustre, which uses d_move() as part of name lookup. See: https://jira.hpdd.intel.com/browse/LU-9735 It could race with a regular rename(), and result in ENOENT instead of either the 'before' or 'after' name. The race can be demonstrated with a simple program which has two threads, one renaming a directory back and forth while another calls getcwd() within that directory: it should never fail, but does. See: https://patchwork.kernel.org/patch/9455345/ We could fix this race by taking d_lock and rechecking when d_unhashed() reports true. Alternately when can remove the window, which is the approach this patch takes. ___d_drop() is introduce which does *not* clear d_hash.pprev so the dentry still appears to be hashed. __d_drop() calls ___d_drop(), then clears d_hash.pprev. __d_move() now uses ___d_drop() and only clears d_hash.pprev when not rehashing. Signed-off-by:
NeilBrown <neilb@suse.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Moni Shoua authored
[ Upstream commit a42b63c1 ] Change the default mapping between TC and TCG as follows: Prio | TC/TCG | from to | (set by FW) (set by SW) ---------+----------------------------------- 0 | 0/0 0/7 1 | 1/0 0/6 2 | 2/0 0/5 3 | 3/0 0/4 4 | 4/0 0/3 5 | 5/0 0/2 6 | 6/0 0/1 7 | 7/0 0/0 These new settings cause that a pause frame for any prio stops traffic for all prios. Fixes: 564c274c ("net/mlx4_en: DCB QoS support") Signed-off-by:
Moni Shoua <monis@mellanox.com> Signed-off-by:
Maor Gottlieb <maorg@mellanox.com> Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Hans de Goede authored
[ Upstream commit 5928c281 ] We're seeing a lot of bogus backlight interfaces on newer machines without a LCD such as desktops, servers and HDMI sticks. This causes userspace to show a non-functional brightness slider in e.g. the GNOME3 system menu, which is undesirable. And, in general, we should simply just not register a non functional backlight interface. Checking the LCD flag causes the bogus acpi_video backlight interfaces to go away (on the machines this was tested on). This change sets the lcd_only option by default on any machines which are Win8-ready, to fix this. This is not entirely without a risk of regressions, but video_detect.c already prefers native-backlight interfaces over the acpi_video one on Win8-ready machines, calling acpi_video_unregister_backlight() as soon as a native interface shows up. This is done because the ACPI backlight interface often is broken on Win8-ready machines, because win8 does not seem to actually use it. So in practice we already end up not registering the ACPI backlight interface on (most) Win8-ready machines with a LCD panel, thus this change does not change anything for (most) machines with a LCD panel and on machines without a LCD panel we actually don't want to register any backlight interfaces. This has been tested on the following machines and fixes a bogus backlight interface showing up there: - Desktop with an Asrock B150M Pro4S/D3 m.b. using i5-6500 builtin gfx - Intel Compute Stick STK1AW32SC - Meegopad T08 HDMI stick Bogus backlight interfaces have also been reported on: - Desktop with Asus H87I-Plus m.b. - Desktop with ASRock B75M-ITX m.b. - Desktop with Gigabyte Z87-D3HP m.b. - Dell PowerEdge T20 desktop Link: https://bugzilla.redhat.com/show_bug.cgi?id=1097436 Link: https://bugzilla.redhat.com/show_bug.cgi?id=1133327 Link: https://bugzilla.redhat.com/show_bug.cgi?id=1133329 Link: https://bugzilla.redhat.com/show_bug.cgi?id=1133646Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Sowmini Varadhan authored
[ Upstream commit 7ae0c649 ] If the rds_sock is not added to the bind_hash_table, we must reset rs_bound_addr so that rds_remove_bound will not trip on this rds_sock. rds_add_bound() does a rds_sock_put() in this failure path, so failing to reset rs_bound_addr will result in a socket refcount bug, and will trigger a WARN_ON with the stack shown below when the application subsequently tries to close the PF_RDS socket. WARNING: CPU: 20 PID: 19499 at net/rds/af_rds.c:496 \ rds_sock_destruct+0x15/0x30 [rds] : __sk_destruct+0x21/0x190 rds_remove_bound.part.13+0xb6/0x140 [rds] rds_release+0x71/0x120 [rds] sock_release+0x1a/0x70 sock_close+0xe/0x20 __fput+0xd5/0x210 task_work_run+0x82/0xa0 do_exit+0x2ce/0xb30 ? syscall_trace_enter+0x1cc/0x2b0 do_group_exit+0x39/0xa0 SyS_exit_group+0x10/0x10 do_syscall_64+0x61/0x1a0 Signed-off-by:
Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
-
Hangbin Liu authored
[ Upstream commit 820da535 ] Report offset parameter in L2TP_CMD_SESSION_GET command if it has been configured by userspace Fixes: 309795f4 ("l2tp: Add netlink control API for L2TP") Reported-by:
Jianlin Shi <jishi@redhat.com> Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by:
-
Masami Hiramatsu authored
[ Upstream commit 9f5c6d87 ] This improve the error message so that user can know event-name error before writing new events to kprobe-events interface. E.g. ====== #./perf probe -x /lib64/libc-2.25.so malloc_get_state* Internal error: "malloc_get_state@GLIBC_2" is an invalid event name. Error: Failed to add events. ====== Reported-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Acked-by:
Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Reviewed-by:
Thomas Richter <tmricht@linux.vnet.ibm.com> Tested-by:
-
Yi Zeng authored
[ Upstream commit a5de11d6 ] When invoking allow_maximum_power and traverse tz->thermal_instances, we should grab thermal_zone_device->lock to avoid race condition. For example, during the system reboot, if the mali GPU device implements device shutdown callback and unregister GPU devfreq cooling device, the deleted list head may be accessed to cause panic, as the following log shows: [ 33.551070] c3 25 (kworker/3:0) Unable to handle kernel paging request at virtual address dead000000000070 [ 33.566708] c3 25 (kworker/3:0) pgd = ffffffc0ed290000 [ 33.572071] c3 25 (kworker/3:0) [dead000000000070] *pgd=00000001ed292003, *pud=00000001ed292003, *pmd=0000000000000000 [ 33.581515] c3 25 (kworker/3:0) Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 33.599761] c3 25 (kworker/3:0) CPU: 3 PID: 25 Comm: kworker/3:0 Not tainted 4.4.35+ #912 [ 33.614137] c3 25 (kworker/3:0) Workqueue: events_freezable thermal_zone_device_check [ 33.620245] c3 25 (kworker/3:0) task: ffffffc0f32e4200 ti: ffffffc0f32f0000 task.ti: ffffffc0f32f0000 [ 33.629466] c3 25 (kworker/3:0) PC is at power_allocator_throttle+0x7c8/0x8a4 [ 33.636609] c3 25 (kworker/3:0) LR is at power_allocator_throttle+0x808/0x8a4 [ 33.643742] c3 25 (kworker/3:0) pc : [<ffffff8008683dd0>] lr : [<ffffff8008683e10>] pstate: 20000145 [ 33.652874] c3 25 (kworker/3:0) sp : ffffffc0f32f3bb0 [ 34.468519] c3 25 (kworker/3:0) Process kworker/3:0 (pid: 25, stack limit = 0xffffffc0f32f0020) [ 34.477220] c3 25 (kworker/3:0) Stack: (0xffffffc0f32f3bb0 to 0xffffffc0f32f4000) [ 34.819822] c3 25 (kworker/3:0) Call trace: [ 34.824021] c3 25 (kworker/3:0) Exception stack(0xffffffc0f32f39c0 to 0xffffffc0f32f3af0) [ 34.924993] c3 25 (kworker/3:0) [<ffffff8008683dd0>] power_allocator_throttle+0x7c8/0x8a4 [ 34.933184] c3 25 (kworker/3:0) [<ffffff80086807f4>] handle_thermal_trip.part.25+0x70/0x224 [ 34.941545] c3 25 (kworker/3:0) [<ffffff8008680a68>] thermal_zone_device_update+0xc0/0x20c [ 34.949818] c3 25 (kworker/3:0) [<ffffff8008680bd4>] thermal_zone_device_check+0x20/0x2c [ 34.957924] c3 25 (kworker/3:0) [<ffffff80080b93a4>] process_one_work+0x168/0x458 [ 34.965414] c3 25 (kworker/3:0) [<ffffff80080ba068>] worker_thread+0x13c/0x4b4 [ 34.972650] c3 25 (kworker/3:0) [<ffffff80080c0a4c>] kthread+0xe8/0xfc [ 34.979187] c3 25 (kworker/3:0) [<ffffff8008084e90>] ret_from_fork+0x10/0x40 [ 34.986244] c3 25 (kworker/3:0) Code: f9405e73 eb1302bf d102e273 54ffc460 (b9402a61) [ 34.994339] c3 25 (kworker/3:0) ---[ end trace 32057901e3b7e1db ]--- Signed-off-by:
Yi Zeng <yizeng@asrmicro.com> Signed-off-by:
Zhang Rui <rui.zhang@intel.com> Signed-off-by:
-
Rasmus Villemoes authored
[ Upstream commit d5c7b4d5 ] Commit a22950c8 (mmc: sdhci-of-esdhc: add quirk SDHCI_QUIRK_BROKEN_TIMEOUT_VAL for ls1021a) added logic to the driver to enable the broken timeout val quirk for ls1021a, but did not add the corresponding compatible string to the device tree, so it didn't really have any effect. Fix that. Signed-off-by:
Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Shiraz Saleem authored
[ Upstream commit fe99afd1 ] Lower Inbound RDMA Read Queue (Q1) object count by a factor of 2 as it is incorrectly doubled. Also, round up Q1 and Transmit FIFO (XF) object count to power of 2 to satisfy hardware requirement. Fixes: 86dbcd0f ("i40iw: add file to handle cqp calls") Signed-off-by:
Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Shiraz Saleem authored
[ Upstream commit df8b13a1 ] Partial FPDU processing is broken as the sequence number for the first partial FPDU is wrong due to incorrect Q2 buffer offset. The offset should be 64 rather than 16. Fixes: 786c6adb ("i40iw: add puda code") Signed-off-by:
-
Jordan Crouse authored
[ Upstream commit 90dd57de ] Amongst its other duties, msm_gem_new_impl adds the newly created GEM object to the shared inactive list which may also be actively modifiying the list during submission. All the paths to modify the list are protected by the mutex except for the one through msm_gem_import which can end up causing list corruption. Signed-off-by:
Jordan Crouse <jcrouse@codeaurora.org> [add extra WARN_ON(!mutex_is_locked(&dev->struct_mutex))] Signed-off-by:
Rob Clark <robdclark@gmail.com> Signed-off-by:
-
linzhang authored
[ Upstream commit 0908cf4d ] There is a race condition in llc_ui_bind if two or more processes/threads try to bind a same socket. If more processes/threads bind a same socket success that will lead to two problems, one is this action is not what we expected, another is will lead to kernel in unstable status or oops(in my simple test case, cause llc2.ko can't unload). The current code is test SOCK_ZAPPED bit to avoid a process to bind a same socket twice but that is can't avoid more processes/threads try to bind a same socket at the same time. So, add lock_sock in llc_ui_bind like others, such as llc_ui_connect. Signed-off-by:
Lin Zhang <xiaolou4617@gmail.com> Signed-off-by:
-
Jan H. Schönherr authored
[ Upstream commit e1d39b17 ] The decision whether or not to exit from L2 to L1 on an lmsw instruction is based on bogus values: instead of using the information encoded within the exit qualification, it uses the data also used for the mov-to-cr instruction, which boils down to using whatever is in %eax at that point. Use the correct values instead. Without this fix, an L1 may not get notified when a 32-bit Linux L2 switches its secondary CPUs to protected mode; the L1 is only notified on the next modification of CR0. This short time window poses a problem, when there is some other reason to exit to L1 in between. Then, L2 will be resumed in real mode and chaos ensues. Signed-off-by:
Jan H. Schönherr <jschoenh@amazon.de> Reviewed-by:
Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Wanpeng Li authored
[ Upstream commit 5acc1ca4 ] Preemption can occur during cancel preemption timer, and there will be inconsistent status in lapic, vmx and vmcs field. CPU0 CPU1 preemption timer vmexit handle_preemption_timer(vCPU0) kvm_lapic_expired_hv_timer vmx_cancel_hv_timer vmx->hv_deadline_tsc = -1 vmcs_clear_bits /* hv_timer_in_use still true */ sched_out sched_in kvm_arch_vcpu_load vmx_set_hv_timer write vmx->hv_deadline_tsc vmcs_set_bits /* back in kvm_lapic_expired_hv_timer */ hv_timer_in_use = false ... vmx_vcpu_run vmx_arm_hv_run write preemption timer deadline spurious preemption timer vmexit handle_preemption_timer(vCPU0) kvm_lapic_expired_hv_timer WARN_ON(!apic->lapic_timer.hv_timer_in_use); This can be reproduced sporadically during boot of L2 on a preemptible L1, causing a splat on L1. WARNING: CPU: 3 PID: 1952 at arch/x86/kvm/lapic.c:1529 kvm_lapic_expired_hv_timer+0xb5/0xd0 [kvm] CPU: 3 PID: 1952 Comm: qemu-system-x86 Not tainted 4.12.0-rc1+ #24 RIP: 0010:kvm_lapic_expired_hv_timer+0xb5/0xd0 [kvm] Call Trace: handle_preemption_timer+0xe/0x20 [kvm_intel] vmx_handle_exit+0xc9/0x15f0 [kvm_intel] ? lock_acquire+0xdb/0x250 ? lock_acquire+0xdb/0x250 ? kvm_arch_vcpu_ioctl_run+0xdf3/0x1ce0 [kvm] kvm_arch_vcpu_ioctl_run+0xe55/0x1ce0 [kvm] kvm_vcpu_ioctl+0x384/0x7b0 [kvm] ? kvm_vcpu_ioctl+0x384/0x7b0 [kvm] ? __fget+0xf3/0x210 do_vfs_ioctl+0xa4/0x700 ? __fget+0x114/0x210 SyS_ioctl+0x79/0x90 do_syscall_64+0x8f/0x750 ? trace_hardirqs_on_thunk+0x1a/0x1c entry_SYSCALL64_slow_path+0x25/0x25 This patch fixes it by disabling preemption while cancelling preemption timer. This way cancel_hv_timer is atomic with respect to kvm_arch_vcpu_load. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Christoph Hellwig authored
[ Upstream commit 83b4605b ] We need to return an error for any call that asks for MSI / MSI-X vectors only, so that non-trivial fallback logic can work properly. Also valid dev->irq and use the "correct" errno value based on feedback from Linus. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reported-by:
Steven Rostedt <rostedt@goodmis.org> Fixes: aff17164 ("PCI: Provide sensible IRQ vector alloc/free routines") Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Thomas Gleixner authored
[ Upstream commit 49dfe2a6 ] The CPU hotplug callbacks are not covered by lockdep versus the cpu hotplug rwsem. CPU0 CPU1 cpuhp_setup_state(STATE, startup, teardown); cpus_read_lock(); invoke_callback_on_ap(); kick_hotplug_thread(ap); wait_for_completion(); hotplug_thread_fn() lock(m); do_stuff(); unlock(m); Lockdep does not know about this dependency and will not trigger on the following code sequence: lock(m); cpus_read_lock(); Add a lockdep map and connect the initiators lock chain with the hotplug thread lock chain, so potential deadlocks can be detected. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Tested-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by:
Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/20170524081549.709375845@linutronix.deSigned-off-by:
-
Nithin Sujir authored
[ Upstream commit 797a9364 ] In the loadbalance arp monitoring scheme, when a slave link change is detected, the slave->link is immediately updated and slave_state_changed is set. Later down the function, the rtnl_lock is acquired and the changes are committed, updating the bond link state. However, the acquisition of the rtnl_lock can fail. The next time the monitor runs, since slave->link is already updated, it determines that link is unchanged. This results in the bond link state permanently out of sync with the slave link. This patch modifies bond_loadbalance_arp_mon() to handle link changes identical to bond_ab_arp_{inspect/commit}(). The new link state is maintained in slave->new_link until we're ready to commit at which point it's copied into slave->link. NOTE: miimon_{inspect/commit}() has a more complex state machine requiring the use of the bond_{propose,commit}_link_state() functions which maintains the intermediate state in slave->link_new_state. The arp monitors don't require that. Testing: This bug is very easy to reproduce with the following steps. 1. In a loop, toggle a slave link of a bond slave interface. 2. In a separate loop, do ifconfig up/down of an unrelated interface to create contention for rtnl_lock. Within a few iterations, the bond link goes out of sync with the slave link. Signed-off-by:
Nithin Nayak Sujir <nsujir@tintri.com> Cc: Mahesh Bandewar <maheshb@google.com> Cc: Jay Vosburgh <jay.vosburgh@canonical.com> Acked-by:
Mahesh Bandewar <maheshb@google.com> Signed-off-by:
-
KT Liao authored
[ Upstream commit 4b3c7dbb ] Some old touchpad FWs need to have interrupt cleared before issuing reset command after updating firmware. We clear interrupt by attempting to read full report from the controller, and discarding any data read. Signed-off-by:
KT Liao <kt.liao@emc.com.tw> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Roman Kapl authored
[ Upstream commit 7c3f1875 ] The default value for somaxconn is set in sysctl_core_net_init(), but this function is not called when kernel is configured without CONFIG_SYSCTL. This results in the kernel not being able to accept TCP connections, because the backlog has zero size. Usually, the user ends up with: "TCP: request_sock_TCP: Possible SYN flooding on port 7. Dropping request. Check SNMP counters." If SYN cookies are not enabled the connection is rejected. Before ef547f2a (tcp: remove max_qlen_log), the effects were less severe, because the backlog was always at least eight slots long. Signed-off-by:
Roman Kapl <roman.kapl@sysgo.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit d0e1a1b5 ] Paul Fiterau Brostean reported : <quote> Linux TCP stack we analyze exhibits behavior that seems odd to me. The scenario is as follows (all packets have empty payloads, no window scaling, rcv/snd window size should not be a factor): TEST HARNESS (CLIENT) LINUX SERVER 1. - LISTEN (server listen, then accepts) 2. - --> <SEQ=100><CTL=SYN> --> SYN-RECEIVED 3. - <-- <SEQ=300><ACK=101><CTL=SYN,ACK> <-- SYN-RECEIVED 4. - --> <SEQ=101><ACK=301><CTL=ACK> --> ESTABLISHED 5. - <-- <SEQ=301><ACK=101><CTL=FIN,ACK> <-- FIN WAIT-1 (server opts to close the data connection calling "close" on the connection socket) 6. - --> <SEQ=101><ACK=99999><CTL=FIN,ACK> --> CLOSING (client sends FIN,ACK with not yet sent acknowledgement number) 7. - <-- <SEQ=302><ACK=102><CTL=ACK> <-- CLOSING (ACK is 102 instead of 101, why?) ... (silence from CLIENT) 8. - <-- <SEQ=301><ACK=102><CTL=FIN,ACK> <-- CLOSING (retransmission, again ACK is 102) Now, note that packet 6 while having the expected sequence number, acknowledges something that wasn't sent by the server. So I would expect the packet to maybe prompt an ACK response from the server, and then be ignored. Yet it is not ignored and actually leads to an increase of the acknowledgement number in the server's retransmission of the FIN,ACK packet. The explanation I found is that the FIN in packet 6 was processed, despite the acknowledgement number being unacceptable. Further experiments indeed show that the server processes this FIN, transitioning to CLOSING, then on receiving an ACK for the FIN it had send in packet 5, the server (or better said connection) transitions from CLOSING to TIME_WAIT (as signaled by netstat). </quote> Indeed, tcp_rcv_state_process() calls tcp_ack() but does not exploit the @acceptable status but for TCP_SYN_RECV state. What we want here is to send a challenge ACK, if not in TCP_SYN_RECV state. TCP_FIN_WAIT1 state is not the only state we should fix. Add a FLAG_NO_CHALLENGE_ACK so that tcp_rcv_state_process() can choose to send a challenge ACK and discard the packet instead of wrongly change socket state. With help from Neal Cardwell. Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Paul Fiterau Brostean <p.fiterau-brostean@science.ru.nl> Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
-
Timmy Li authored
[ Upstream commit 717902cc ] Commit 093d24a2 ("arm64: PCI: Manage controller-specific data on per-controller basis") added code to allocate ACPI PCI root_ops dynamically on a per host bridge basis but failed to update the corresponding memory allocation failure path in pci_acpi_scan_root() leading to a potential memory leakage. Fix it by adding the required kfree call. Fixes: 093d24a2 ("arm64: PCI: Manage controller-specific data on per-controller basis") Reviewed-by:
Tomasz Nowicki <tn@semihalf.com> Signed-off-by:
Timmy Li <lixiaoping3@huawei.com> [lorenzo.pieralisi@arm.com: refactored code, rewrote commit log] Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> CC: Will Deacon <will.deacon@arm.com> CC: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Eryu Guan authored
[ Upstream commit 624327f8 ] ext4_find_unwritten_pgoff() is used to search for offset of hole or data in page range [index, end] (both inclusive), and the max number of pages to search should be at least one, if end == index. Otherwise the only page is missed and no hole or data is found, which is not correct. When block size is smaller than page size, this can be demonstrated by preallocating a file with size smaller than page size and writing data to the last block. E.g. run this xfs_io command on a 1k block size ext4 on x86_64 host. # xfs_io -fc "falloc 0 3k" -c "pwrite 2k 1k" \ -c "seek -d 0" /mnt/ext4/testfile wrote 1024/1024 bytes at offset 2048 1 KiB, 1 ops; 0.0000 sec (42.459 MiB/sec and 43478.2609 ops/sec) Whence Result DATA EOF Data at offset 2k was missed, and lseek(2) returned ENXIO. This is unconvered by generic/285 subtest 07 and 08 on ppc64 host, where pagesize is 64k. Because a recent change to generic/285 reduced the preallocated file size to smaller than 64k. Signed-off-by:
Eryu Guan <eguan@redhat.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Reviewed-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Michael Schmitz authored
[ Upstream commit 9dfa7bba ] get_reg() can be reentered on architectures with prioritized interrupts (m68k in this case), causing f->reg_index to be incremented after the range check. Out of bounds memory access past the pt_regs struct results. This will go mostly undetected unless access is beyond end of memory. Prevent the race by disabling interrupts in get_reg(). Tested on m68k (Atari Falcon, and ARAnyM emulator). Kudos to Geert Uytterhoeven for helping to trace this race. Signed-off-by:
Michael Schmitz <schmitzmic@gmail.com> Signed-off-by:
-
Maurizio Lombardi authored
[ Upstream commit c2dd893a ] If multiple tasks attempt to read the stats, it may happen that the start_req_done completion is re-initialized while still being used by another task, causing a list corruption. This patch fixes the bug by adding a mutex to serialize the calls to bnx2fc_get_host_stats(). WARNING: at lib/list_debug.c:48 list_del+0x6e/0xa0() (Not tainted) Hardware name: PowerEdge R820 list_del corruption. prev->next should be ffff882035627d90, but was ffff884069541588 Pid: 40267, comm: perl Not tainted 2.6.32-642.3.1.el6.x86_64 #1 Call Trace: [<ffffffff8107c691>] ? warn_slowpath_common+0x91/0xe0 [<ffffffff8107c796>] ? warn_slowpath_fmt+0x46/0x60 [<ffffffff812ad16e>] ? list_del+0x6e/0xa0 [<ffffffff81547eed>] ? wait_for_common+0x14d/0x180 [<ffffffff8106c4a0>] ? default_wake_function+0x0/0x20 [<ffffffff81547fd3>] ? wait_for_completion_timeout+0x13/0x20 [<ffffffffa05410b1>] ? bnx2fc_get_host_stats+0xa1/0x280 [bnx2fc] [<ffffffffa04cf630>] ? fc_stat_show+0x90/0xc0 [scsi_transport_fc] [<ffffffffa04cf8b6>] ? show_fcstat_tx_frames+0x16/0x20 [scsi_transport_fc] [<ffffffff8137c647>] ? dev_attr_show+0x27/0x50 [<ffffffff8113b9be>] ? __get_free_pages+0xe/0x50 [<ffffffff812170e1>] ? sysfs_read_file+0x111/0x200 [<ffffffff8119a305>] ? vfs_read+0xb5/0x1a0 [<ffffffff8119b0b6>] ? fget_light_pos+0x16/0x50 [<ffffffff8119a651>] ? sys_read+0x51/0xb0 [<ffffffff810ee1fe>] ? __audit_syscall_exit+0x25e/0x290 [<ffffffff8100b0d2>] ? system_call_fastpath+0x16/0x1b Signed-off-by:
Maurizio Lombardi <mlombard@redhat.com> Acked-by:
Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Kuninori Morimoto authored
[ Upstream commit 7819a942 ] commit 90431eb4 ("ASoC: rsnd: don't use PDTA bit for 24bit on SSI") fixups 24bit mode data alignment, but PIO was not cared. This patch fixes PIO mode 24bit data alignment Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 662f9a10 ] If xdr_inline_decode() fails then we end up returning ERR_PTR(0). The caller treats NULL returns as -ENOMEM so it doesn't really hurt runtime, but obviously we intended to set an error code here. Fixes: d67ae825 ("pnfs/flexfiles: Add the FlexFile Layout Driver") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Liping Zhang authored
[ Upstream commit fefa9267 ] If nf_conntrack_htable_size was adjusted by the user during the ct dump operation, we may invoke nf_ct_put twice for the same ct, i.e. the "last" ct. This will cause the ct will be freed but still linked in hash buckets. It's very easy to reproduce the problem by the following commands: # while : ; do echo $RANDOM > /proc/sys/net/netfilter/nf_conntrack_buckets done # while : ; do conntrack -L done # iperf -s 127.0.0.1 & # iperf -c 127.0.0.1 -P 60 -t 36000 After a while, the system will hang like this: NMI watchdog: BUG: soft lockup - CPU#1 stuck for 22s! [bash:20184] NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [iperf:20382] ... So at last if we find cb->args[1] is equal to "last", this means hash resize happened, then we can set cb->args[1] to 0 to fix the above issue. Fixes: d205dc40 ("[NETFILTER]: ctnetlink: fix deadlock in table dumping") Signed-off-by:
Liping Zhang <zlpnobody@gmail.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Milian Wolff authored
[ Upstream commit 1982ad48 ] As the documentation for dwfl_frame_pc says, frames that are no activation frames need to have their program counter decremented by one to properly find the function of the caller. This fixes many cases where perf report currently attributes the cost to the next line. I.e. I have code like this: ~~~~~~~~~~~~~~~ #include <thread> #include <chrono> using namespace std; int main() { this_thread::sleep_for(chrono::milliseconds(1000)); this_thread::sleep_for(chrono::milliseconds(100)); this_thread::sleep_for(chrono::milliseconds(10)); return 0; } ~~~~~~~~~~~~~~~ Now compile and record it: ~~~~~~~~~~~~~~~ g++ -std=c++11 -g -O2 test.cpp echo 1 | sudo tee /proc/sys/kernel/sched_schedstats perf record \ --event sched:sched_stat_sleep \ --event sched:sched_process_exit \ --event sched:sched_switch --call-graph=dwarf \ --output perf.data.raw \ ./a.out echo 0 | sudo tee /proc/sys/kernel/sched_schedstats perf inject --sched-stat --input perf.data.raw --output perf.data ~~~~~~~~~~~~~~~ Before this patch, the report clearly shows the off-by-one issue. Most notably, the last sleep invocation is incorrectly attributed to the "return 0;" line: ~~~~~~~~~~~~~~~ Overhead Source:Line ........ ........... 100.00% core.c:0 | ---__schedule core.c:0 schedule do_nanosleep hrtimer.c:0 hrtimer_nanosleep sys_nanosleep entry_SYSCALL_64_fastpath .tmp_entry_64.o:0 __nanosleep_nocancel .:0 std::this_thread::sleep_for<long, std::ratio<1l, 1000l> > thread:323 | |--90.08%--main test.cpp:9 | __libc_start_main | _start | |--9.01%--main test.cpp:10 | __libc_start_main | _start | --0.91%--main test.cpp:13 __libc_start_main _start ~~~~~~~~~~~~~~~ With this patch here applied, the issue is fixed. The report becomes much more usable: ~~~~~~~~~~~~~~~ Overhead Source:Line ........ ........... 100.00% core.c:0 | ---__schedule core.c:0 schedule do_nanosleep hrtimer.c:0 hrtimer_nanosleep sys_nanosleep entry_SYSCALL_64_fastpath .tmp_entry_64.o:0 __nanosleep_nocancel .:0 std::this_thread::sleep_for<long, std::ratio<1l, 1000l> > thread:323 | |--90.08%--main test.cpp:8 | __libc_start_main | _start | |--9.01%--main test.cpp:9 | __libc_start_main | _start | --0.91%--main test.cpp:10 __libc_start_main _start ~~~~~~~~~~~~~~~ Similarly it works for signal frames: ~~~~~~~~~~~~~~~ __noinline void bar(void) { volatile long cnt = 0; for (cnt = 0; cnt < 100000000; cnt++); } __noinline void foo(void) { bar(); } void sig_handler(int sig) { foo(); } int main(void) { signal(SIGUSR1, sig_handler); raise(SIGUSR1); foo(); return 0; } ~~~~~~~~~~~~~~~~ Before, the report wrongly points to `signal.c:29` after raise(): ~~~~~~~~~~~~~~~~ $ perf report --stdio --no-children -g srcline -s srcline ... 100.00% signal.c:11 | ---bar signal.c:11 | |--50.49%--main signal.c:29 | __libc_start_main | _start | --49.51%--0x33a8f raise .:0 main signal.c:29 __libc_start_main _start ~~~~~~~~~~~~~~~~ With this patch in, the issue is fixed and we instead get: ~~~~~~~~~~~~~~~~ 100.00% signal signal [.] bar | ---bar signal.c:11 | |--50.49%--main signal.c:29 | __libc_start_main | _start | --49.51%--0x33a8f raise .:0 main signal.c:27 __libc_start_main _start ~~~~~~~~~~~~~~~~ Note how this patch fixes this issue for both unwinding methods, i.e. both dwfl and libunwind. The former case is straight-forward thanks to dwfl_frame_pc(). For libunwind, we replace the functionality via unw_is_signal_frame() for any but the very first frame. Signed-off-by:
Milian Wolff <milian.wolff@kdab.com> Signed-off-by:
Namhyung Kim <namhyung@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yao Jin <yao.jin@linux.intel.com> Cc: kernel-team@lge.com Link: http://lkml.kernel.org/r/20170524062129.32529-4-namhyung@kernel.orgSigned-off-by:
-
Dan Carpenter authored
[ Upstream commit 293dffaa ] If there is not enough space then ceph_decode_32_safe() does a goto bad. We need to return an error code in that situation. The current code returns ERR_PTR(0) which is NULL. The callers are not expecting that and it results in a NULL dereference. Fixes: f24e9980 ("ceph: OSD client") Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
-
Lin Zhang authored
[ Upstream commit a611c58b ] This patch fixes the kernel oops when release net_device reference in advance. In function raw_sendmsg(i think the dgram_sendmsg has the same problem), there is a race condition between dev_put and dev_queue_xmit when the device is gong that maybe lead to dev_queue_ximt to see an illegal net_device pointer. My test kernel is 3.13.0-32 and because i am not have a real 802154 device, so i change lowpan_newlink function to this: /* find and hold real wpan device */ real_dev = dev_get_by_index(src_net, nla_get_u32(tb[IFLA_LINK])); if (!real_dev) return -ENODEV; // if (real_dev->type != ARPHRD_IEEE802154) { // dev_put(real_dev); // return -EINVAL; // } lowpan_dev_info(dev)->real_dev = real_dev; lowpan_dev_info(dev)->fragment_tag = 0; mutex_init(&lowpan_dev_info(dev)->dev_list_mtx); Also, in order to simulate preempt, i change the raw_sendmsg function to this: skb->dev = dev; skb->sk = sk; skb->protocol = htons(ETH_P_IEEE802154); dev_put(dev); //simulate preempt schedule_timeout_uninterruptible(30 * HZ); err = dev_queue_xmit(skb); if (err > 0) err = net_xmit_errno(err); and this is my userspace test code named test_send_data: int main(int argc, char **argv) { char buf[127]; int sockfd; sockfd = socket(AF_IEEE802154, SOCK_RAW, 0); if (sockfd < 0) { printf("create sockfd error: %s\n", strerror(errno)); return -1; } send(sockfd, buf, sizeof(buf), 0); return 0; } This is my test case: root@zhanglin-x-computer:~/develop/802154# uname -a Linux zhanglin-x-computer 3.13.0-32-generic #57-Ubuntu SMP Tue Jul 15 03:51:08 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux root@zhanglin-x-computer:~/develop/802154# ip link add link eth0 name lowpan0 type lowpan root@zhanglin-x-computer:~/develop/802154# //keep the lowpan0 device down root@zhanglin-x-computer:~/develop/802154# ./test_send_data & //wait a while root@zhanglin-x-computer:~/develop/802154# ip link del link dev lowpan0 //the device is gone //oops [381.303307] general protection fault: 0000 [#1]SMP [381.303407] Modules linked in: af_802154 6lowpan bnep rfcomm bluetooth nls_iso8859_1 snd_hda_codec_hdmi snd_hda_codec_realtek rts5139(C) snd_hda_intel snd_had_codec snd_hwdep snd_pcm snd_page_alloc snd_seq_midi snd_seq_midi_event snd_rawmidi snd_req intel_rapl snd_seq_device coretemp i915 kvm_intel kvm snd_timer snd crct10dif_pclmul crc32_pclmul ghash_clmulni_intel cypted drm_kms_helper drm i2c_algo_bit soundcore video mac_hid parport_pc ppdev ip parport hid_generic usbhid hid ahci r8169 mii libahdi [381.304286] CPU:1 PID: 2524 Commm: 1 Tainted: G C 0 3.13.0-32-generic [381.304409] Hardware name: Haier Haier DT Computer/Haier DT Codputer, BIOS FIBT19H02_X64 06/09/2014 [381.304546] tasks: ffff000096965fc0 ti: ffffB0013779c000 task.ti: ffffB8013779c000 [381.304659] RIP: 0010:[<ffffffff01621fe1>] [<ffffffff81621fe1>] __dev_queue_ximt+0x61/0x500 [381.304798] RSP: 0018:ffffB8013779dca0 EFLAGS: 00010202 [381.304880] RAX: 272b031d57565351 RBX: 0000000000000000 RCX: ffff8800968f1a00 [381.304987] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8800968f1a00 [381.305095] RBP: ffff8e013773dce0 R08: 0000000000000266 R09: 0000000000000004 [381.305202] R10: 0000000000000004 R11: 0000000000000005 R12: ffff88013902e000 [381.305310] R13: 000000000000007f R14: 000000000000007f R15: ffff8800968f1a00 [381.305418] FS: 00007fc57f50f740(0000) GS: ffff88013fc80000(0000) knlGS: 0000000000000000 [381.305540] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [381.305627] CR2: 00007fad0841c000 CR3: 00000001368dd000 CR4: 00000000001007e0 [361.905734] Stack: [381.305768] 00000000002052d0 000000003facb30a ffff88013779dcc0 ffff880137764000 [381.305898] ffff88013779de70 000000000000007f 000000000000007f ffff88013902e000 [381.306026] ffff88013779dcf0 ffffffff81622490 ffff88013779dd39 ffffffffa03af9f1 [381.306155] Call Trace: [381.306202] [<ffffffff81622490>] dev_queue_xmit+0x10/0x20 [381.306294] [<ffffffffa03af9f1>] raw_sendmsg+0x1b1/0x270 [af_802154] [381.306396] [<ffffffffa03af054>] ieee802154_sock_sendmsg+0x14/0x20 [af_802154] [381.306512] [<ffffffff816079eb>] sock_sendmsg+0x8b/0xc0 [381.306600] [<ffffffff811d52a5>] ? __d_alloc+0x25/0x180 [381.306687] [<ffffffff811a1f56>] ? kmem_cache_alloc_trace+0x1c6/0x1f0 [381.306791] [<ffffffff81607b91>] SYSC_sendto+0x121/0x1c0 [381.306878] [<ffffffff8109ddf4>] ? vtime_account_user+x54/0x60 [381.306975] [<ffffffff81020d45>] ? syscall_trace_enter+0x145/0x250 [381.307073] [<ffffffff816086ae>] SyS_sendto+0xe/0x10 [381.307156] [<ffffffff8172c87f>] tracesys+0xe1/0xe6 [381.307233] Code: c6 a1 a4 ff 41 8b 57 78 49 8b 47 20 85 d2 48 8b 80 78 07 00 00 75 21 49 8b 57 18 48 85 d2 74 18 48 85 c0 74 13 8b 92 ac 01 00 00 <3b> 50 10 73 08 8b 44 90 14 41 89 47 78 41 f6 84 24 d5 00 00 00 [381.307801] RIP [<ffffffff81621fe1>] _dev_queue_xmit+0x61/0x500 [381.307901] RSP <ffff88013779dca0> [381.347512] Kernel panic - not syncing: Fatal exception in interrupt [381.347747] drm_kms_helper: panic occurred, switching back to text console In my opinion, there is always exist a chance that the device is gong before call dev_queue_xmit. I think the latest kernel is have the same problem and that dev_put should be behind of the dev_queue_xmit. Signed-off-by:
Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Jesper Dangaard Brouer authored
[ Upstream commit 12e8b570 ] Masks for extracting part of the Completion Queue Entry (CQE) field rss_hash_type was swapped, namely CQE_RSS_HTYPE_IP and CQE_RSS_HTYPE_L4. The bug resulted in setting skb->l4_hash, even-though the rss_hash_type indicated that hash was NOT computed over the L4 (UDP or TCP) part of the packet. Added comments from the datasheet, to make it more clear what these masks are selecting. Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Acked-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 7bd897cf ] We don't set an error code on this path. It means that we return NULL instead of an error pointer and the caller does a NULL dereference. Fixes: 6d1d8050 ("block, partition: add partition_meta_info to hd_struct") Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Stephen Smalley authored
[ Upstream commit ccb54478 ] open permission is currently only defined for files in the kernel (COMMON_FILE_PERMS rather than COMMON_FILE_SOCK_PERMS). Construction of an artificial test case that tries to open a socket via /proc/pid/fd will generate a recvfrom avc denial because recvfrom and open happen to map to the same permission bit in socket vs file classes. open of a socket via /proc/pid/fd is not supported by the kernel regardless and will ultimately return ENXIO. But we hit the permission check first and can thus produce these odd/misleading denials. Omit the open check when operating on a socket. Signed-off-by:
Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
-
Tariq Toukan authored
[ Upstream commit b665d98e ] Add tolerance to failures of irq_set_affinity_hint(). Its role is to give hints that optimizes performance, and should not block the driver load. In non-SMP systems, functionality is not available as there is a single core, and all these calls definitely fail. Hence, do not call the function and avoid the warning prints. Fixes: db058a18 ("net/mlx5_core: Set irq affinity hints") Signed-off-by:
-
Hans de Goede authored
[ Upstream commit 9a752b4c ] The Crystal Cove PMIC has 16 real GPIOs but the ACPI code for devices with this PMIC may address up to 95 GPIOs, these extra GPIOs are called virtual GPIOs and are used by the ACPI code as a method of accessing various non GPIO bits of PMIC. Commit dcdc3018 ("gpio: crystalcove: support virtual GPIO") added dummy support for these to avoid a bunch of ACPI errors, but instead of ignoring writes / reads to them by doing: if (gpio >= CRYSTALCOVE_GPIO_NUM) return 0; It accidentally introduced the following wrong check: if (gpio > CRYSTALCOVE_VGPIO_NUM) return 0; Which means that attempts by the ACPI code to access these gpios causes some arbitrary gpio to get touched through for example GPIO1P0CTLO + gpionr % 8. Since we do support input/output (but not interrupts) on the 0x5e virtual GPIO, this commit makes to_reg return -ENOTSUPP for unsupported virtual GPIOs so as to not have to check for (gpio >= CRYSTALCOVE_GPIO_NUM && gpio != 0x5e) everywhere and to make it easier to add support for more virtual GPIOs in the future. It then adds a check for to_reg returning an error to all callers where this may happen fixing the ACPI code accessing virtual GPIOs accidentally causing changes to real GPIOs. Fixes: dcdc3018 ("gpio: crystalcove: support virtual GPIO") Cc: Aaron Lu <aaron.lu@intel.com> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Vlastimil Babka authored
[ Upstream commit 8655d549 ] A customer has reported a soft-lockup when running an intensive memory stress test, where the trace on multiple CPU's looks like this: RIP: 0010:[<ffffffff810c53fe>] [<ffffffff810c53fe>] native_queued_spin_lock_slowpath+0x10e/0x190 ... Call Trace: [<ffffffff81182d07>] queued_spin_lock_slowpath+0x7/0xa [<ffffffff811bc331>] change_protection_range+0x3b1/0x930 [<ffffffff811d4be8>] change_prot_numa+0x18/0x30 [<ffffffff810adefe>] task_numa_work+0x1fe/0x310 [<ffffffff81098322>] task_work_run+0x72/0x90 Further investigation showed that the lock contention here is pmd_lock(). The task_numa_work() function makes sure that only one thread is let to perform the work in a single scan period (via cmpxchg), but if there's a thread with mmap_sem locked for writing for several periods, multiple threads in task_numa_work() can build up a convoy waiting for mmap_sem for read and then all get unblocked at once. This patch changes the down_read() to the trylock version, which prevents the build up. For a workload experiencing mmap_sem contention, it's probably better to postpone the NUMA balancing work anyway. This seems to have fixed the soft lockups involving pmd_lock(), which is in line with the convoy theory. Signed-off-by:
Vlastimil Babka <vbabka@suse.cz> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by:
Rik van Riel <riel@redhat.com> Acked-by:
Mel Gorman <mgorman@techsingularity.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20170515131316.21909-1-vbabka@suse.czSigned-off-by:
-
Dan Carpenter authored
[ Upstream commit 36cc2b92 ] We don't set an error code here which means that perf_event_alloc() returns ERR_PTR(0) (in other words NULL). The callers are not expecting that and would Oops. Signed-off-by:
-
Tin Huynh authored
[ Upstream commit aace34c0 ] The driver checks an incorrect flag of functionality of adapter. When a driver requires i2c_smbus_read_byte_data and i2c_smbus_write_byte_data, it should check I2C_FUNC_SMBUS_BYTE_DATA instead I2C_FUNC_I2C. This patch fixes the problem. Signed-off-by:
Tin Huynh <tnhuynh@apm.com> Signed-off-by:
Jacek Anaszewski <jacek.anaszewski@gmail.com> Signed-off-by:
-
