- 03 Oct, 2015 6 commits
-
-
Daniel Borkmann authored
[ Upstream commit e41b0bed ] We previously register IPPROTO_ROUTING offload under inet6_add_offload(), but in error path, we try to unregister it with inet_del_offload(). This doesn't seem correct, it should actually be inet6_del_offload(), also ipv6_exthdrs_offload_exit() from that commit seems rather incorrect (it also uses rthdr_offload twice), but it got removed entirely later on. Fixes: 3336288a ("ipv6: Switch to using new offload infrastructure.") Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Daniel Borkmann authored
[ Upstream commit b382c086 ] diag socket's sock_diag_put_filterinfo() dumps classic BPF programs upon request to user space (ss -0 -b). However, native eBPF programs attached to sockets (SO_ATTACH_BPF) cannot be dumped with this method: Their orig_prog is always NULL. However, sock_diag_put_filterinfo() unconditionally tries to access its filter length resp. wants to copy the filter insns from there. Internal cBPF to eBPF transformations attached to sockets don't have this issue, as orig_prog state is kept. It's currently only used by packet sockets. If we would want to add native eBPF support in the future, this needs to be done through a different attribute than PACKET_DIAG_FILTER to not confuse possible user space disassemblers that work on diag data. Fixes: 89aa0758 ("net: sock: allow eBPF programs to be attached to sockets") Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by:
Alexei Starovoitov <ast@plumgrid.com> Signed-off-by:
-
Eugene Shatokhin authored
[ Upstream commit f50791ac ] It is needed to check EVENT_NO_RUNTIME_PM bit of dev->flags in usbnet_stop(), but its value should be read before it is cleared when dev->flags is set to 0. The problem was spotted and the fix was provided by Oliver Neukum <oneukum@suse.de>. Signed-off-by:
Eugene Shatokhin <eugene.shatokhin@rosalab.ru> Acked-by:
Oliver Neukum <oneukum@suse.com> Signed-off-by:
-
WANG Cong authored
[ Upstream commit a6c1aea0 ] In commit 1e052be6 ("net_sched: destroy proto tp when all filters are gone") I added a check in u32_destroy() to see if all real filters are gone for each tp, however, that is only done for root_ht, same is needed for others. This can be reproduced by the following tc commands: tc filter add dev eth0 parent 1:0 prio 5 handle 15: protocol ip u32 divisor 256 tc filter add dev eth0 protocol ip parent 1: prio 5 handle 15:2:2 u32 ht 15:2: match ip src 10.0.0.2 flowid 1:10 tc filter add dev eth0 protocol ip parent 1: prio 5 handle 15:2:3 u32 ht 15:2: match ip src 10.0.0.3 flowid 1:10 Fixes: 1e052be6 ("net_sched: destroy proto tp when all filters are gone") Reported-by:
Akshat Kakkar <akshat.1984@gmail.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
Cong Wang <cwang@twopensource.com> Signed-off-by:
-
Marcelo Ricardo Leitner authored
[ Upstream commit bef0057b ] Before 56ef9c90[1] it used to ignore all errors from igmp_join(). That commit enhanced that and made it error out whatever error happened with igmp_join(), but that's not good because when using multicast groups vxlan will try to join it multiple times if the socket is reused and then the 2nd and further attempts will fail with EADDRINUSE. As we don't track to which groups the socket is already subscribed, it's okay to just ignore that error. Fixes: 56ef9c90 ("vxlan: Move socket initialization to within rtnl scope") Reported-by:
John Nielsen <lists@jnielsen.net> Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
huaibin Wang authored
[ Upstream commit d4257295 ] When a tunnel is deleted, the cached dst entry should be released. This problem may prevent the removal of a netns (seen with a x-netns IPv6 gre tunnel): unregister_netdevice: waiting for lo to become free. Usage count = 3 CC: Dmitry Kozlov <xeb@mail.ru> Fixes: c12b395a ("gre: Support GRE over IPv6") Signed-off-by:
huaibin Wang <huaibin.wang@6wind.com> Signed-off-by:
-
- 29 Sep, 2015 34 commits
-
-
Greg Kroah-Hartman authored
-
Daniel Axtens authored
commit 4e1efb40 upstream. If the driver doesn't participate in EEH, the AFUs will be removed by cxl_remove, which will be invoked by EEH. If the driver does particpate in EEH, the vPHB needs to stick around so that the it can particpate. In both cases, we shouldn't remove the AFU/vPHB. Reviewed-by:
Cyril Bur <cyrilbur@gmail.com> Signed-off-by:
Daniel Axtens <dja@axtens.net> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Reported-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by:
-
Andy Whitcroft authored
[ Upstream commit 25b97c01 ] When generating /proc/net/route we emit a header followed by a line for each route. When a short read is performed we will restart this process based on the open file descriptor. When calculating the start point we fail to take into account that the 0th entry is the header. This leads us to skip the first entry when doing a continuation read. This can be easily seen with the comparison below: while read l; do echo "$l"; done </proc/net/route >A cat /proc/net/route >B diff -bu A B | grep '^[+-]' On my example machine I have approximatly 10KB of route output. There we see the very first non-title element is lost in the while read case, and an entry around the 8K mark in the cat case: +wlan0 00000000 02021EAC 0003 0 0 400 00000000 0 0 0 -tun1 00C0AC0A 00000000 0001 0 0 950 00C0FFFF 0 0 0 Fix up the off-by-one when reaquiring position on continuation. Fixes: 8be33e95 ("fib_trie: Fib walk rcu should take a tnode and key instead of a trie and a leaf") BugLink: http://bugs.launchpad.net/bugs/1483440Acked-by:
Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by:
Andy Whitcroft <apw@canonical.com> Signed-off-by:
-
Florian Fainelli authored
[ Upstream commit 211c504a ] In case we need to divert reads/writes using the slave MII bus, we may have already fetched a valid PHY interface property from Device Tree, and that mode is used by the PHY driver to make configuration decisions. If we could not fetch the "phy-mode" property, we will assign p->phy_interface to PHY_INTERFACE_MODE_NA, such that we can actually check for that condition as to whether or not we should override the interface value. Fixes: 19334920 ("net: dsa: Set valid phy interface type") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 2235f2ac ] reqsk_queue_destroy() and reqsk_queue_unlink() should use del_timer_sync() instead of del_timer() before calling reqsk_put(), otherwise we could free a req still used by another cpu. But before doing so, reqsk_queue_destroy() must release syn_wait_lock spinlock or risk a dead lock, as reqsk_timer_handler() might need to take this same spinlock from reqsk_queue_unlink() (called from inet_csk_reqsk_queue_drop()) Fixes: fa76ce73 ("inet: get rid of central tcp/dccp listener timer") Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 3257d8b1 ] In commit b357a364 ("inet: fix possible panic in reqsk_queue_unlink()"), I missed fact that tcp_check_req() can return the listener socket in one case, and that we must release the request socket refcount or we leak it. Tested: Following packetdrill test template shows the issue 0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 +0 < S 0:0(0) win 2920 <mss 1460,sackOK,nop,nop> +0 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK> +.002 < . 1:1(0) ack 21 win 2920 +0 > R 21:21(0) Fixes: b357a364 ("inet: fix possible panic in reqsk_queue_unlink()") Signed-off-by:
-
Daniel Borkmann authored
[ Upstream commit 4e7c1330 ] Linus reports the following deadlock on rtnl_mutex; triggered only once so far (extract): [12236.694209] NetworkManager D 0000000000013b80 0 1047 1 0x00000000 [12236.694218] ffff88003f902640 0000000000000000 ffffffff815d15a9 0000000000000018 [12236.694224] ffff880119538000 ffff88003f902640 ffffffff81a8ff84 00000000ffffffff [12236.694230] ffffffff81a8ff88 ffff880119c47f00 ffffffff815d133a ffffffff81a8ff80 [12236.694235] Call Trace: [12236.694250] [<ffffffff815d15a9>] ? schedule_preempt_disabled+0x9/0x10 [12236.694257] [<ffffffff815d133a>] ? schedule+0x2a/0x70 [12236.694263] [<ffffffff815d15a9>] ? schedule_preempt_disabled+0x9/0x10 [12236.694271] [<ffffffff815d2c3f>] ? __mutex_lock_slowpath+0x7f/0xf0 [12236.694280] [<ffffffff815d2cc6>] ? mutex_lock+0x16/0x30 [12236.694291] [<ffffffff814f1f90>] ? rtnetlink_rcv+0x10/0x30 [12236.694299] [<ffffffff8150ce3b>] ? netlink_unicast+0xfb/0x180 [12236.694309] [<ffffffff814f5ad3>] ? rtnl_getlink+0x113/0x190 [12236.694319] [<ffffffff814f202a>] ? rtnetlink_rcv_msg+0x7a/0x210 [12236.694331] [<ffffffff8124565c>] ? sock_has_perm+0x5c/0x70 [12236.694339] [<ffffffff814f1fb0>] ? rtnetlink_rcv+0x30/0x30 [12236.694346] [<ffffffff8150d62c>] ? netlink_rcv_skb+0x9c/0xc0 [12236.694354] [<ffffffff814f1f9f>] ? rtnetlink_rcv+0x1f/0x30 [12236.694360] [<ffffffff8150ce3b>] ? netlink_unicast+0xfb/0x180 [12236.694367] [<ffffffff8150d344>] ? netlink_sendmsg+0x484/0x5d0 [12236.694376] [<ffffffff810a236f>] ? __wake_up+0x2f/0x50 [12236.694387] [<ffffffff814cad23>] ? sock_sendmsg+0x33/0x40 [12236.694396] [<ffffffff814cb05e>] ? ___sys_sendmsg+0x22e/0x240 [12236.694405] [<ffffffff814cab75>] ? ___sys_recvmsg+0x135/0x1a0 [12236.694415] [<ffffffff811a9d12>] ? eventfd_write+0x82/0x210 [12236.694423] [<ffffffff811a0f9e>] ? fsnotify+0x32e/0x4c0 [12236.694429] [<ffffffff8108cb70>] ? wake_up_q+0x60/0x60 [12236.694434] [<ffffffff814cba09>] ? __sys_sendmsg+0x39/0x70 [12236.694440] [<ffffffff815d4797>] ? entry_SYSCALL_64_fastpath+0x12/0x6a It seems so far plausible that the recursive call into rtnetlink_rcv() looks suspicious. One way, where this could trigger is that the senders NETLINK_CB(skb).portid was wrongly 0 (which is rtnetlink socket), so the rtnl_getlink() request's answer would be sent to the kernel instead to the actual user process, thus grabbing rtnl_mutex() twice. One theory would be that netlink_autobind() triggered via netlink_sendmsg() internally overwrites the -EBUSY error to 0, but where it is wrongly originating from __netlink_insert() instead. That would reset the socket's portid to 0, which is then filled into NETLINK_CB(skb).portid later on. As commit d470e3b4 ("[NETLINK]: Fix two socket hashing bugs.") also puts it, -EBUSY should not be propagated from netlink_insert(). It looks like it's very unlikely to reproduce. We need to trigger the rhashtable_insert_rehash() handler under a situation where rehashing currently occurs (one /rare/ way would be to hit ht->elasticity limits while not filled enough to expand the hashtable, but that would rather require a specifically crafted bind() sequence with knowledge about destination slots, seems unlikely). It probably makes sense to guard __netlink_insert() in any case and remap that error. It was suggested that EOVERFLOW might be better than an already overloaded ENOMEM. Reference: http://thread.gmane.org/gmane.linux.network/372676Reported-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Acked-by:
Thomas Graf <tgraf@suug.ch> Signed-off-by:
-
Ivan Vecera authored
[ Upstream commit ade4dc3e ] The commit "e29aa339 bna: Enable Multi Buffer RX" moved packets counter increment from the beginning of the NAPI processing loop after the check for erroneous packets so they are never accounted. This counter is used to inform firmware about number of processed completions (packets). As these packets are never acked the firmware fires IRQs for them again and again. Fixes: e29aa339 ("bna: Enable Multi Buffer RX") Signed-off-by:
Ivan Vecera <ivecera@redhat.com> Acked-by:
Rasesh Mody <rasesh.mody@qlogic.com> Signed-off-by:
-
Nikolay Aleksandrov authored
[ Upstream commit 786c2077 ] The attribute size wasn't accounted for in the get_slave_size() callback (br_port_get_slave_size) when it was introduced, so fix it now. Also add a policy entry for it in br_port_policy. Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Fixes: 842a9ae0 ("bridge: Extend Proxy ARP design to allow optional rules for Wi-Fi") Signed-off-by:
-
Nikolay Aleksandrov authored
[ Upstream commit 355b9f9d ] The attribute size wasn't accounted for in the get_slave_size() callback (br_port_get_slave_size) when it was introduced, so fix it now. Also add a policy entry for it in br_port_policy. Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 10e2eb87 ] Multicast dst are not cached. They carry DST_NOCACHE. As mentioned in commit f8864972 ("ipv4: fix dst race in sk_dst_get()"), these dst need special care before caching them into a socket. Caching them is allowed only if their refcnt was not 0, ie we must use atomic_inc_not_zero() Also, we must use READ_ONCE() to fetch sk->sk_rx_dst, as mentioned in commit d0c294c5 ("tcp: prevent fetching dst twice in early demux code") Fixes: 421b3885 ("udp: ipv4: Add udp early demux") Tested-by:
Gregory Hoggarth <Gregory.Hoggarth@alliedtelesis.co.nz> Signed-off-by:
Alex Gartrell <agartrell@fb.com> Cc: Michal Kubeček <mkubecek@suse.cz> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 468b732b ] "len" is a signed integer. We check that len is not negative, so it goes from zero to INT_MAX. PAGE_SIZE is unsigned long so the comparison is type promoted to unsigned long. ULONG_MAX - 4095 is a higher than INT_MAX so the condition can never be true. I don't know if this is harmful but it seems safe to limit "len" to INT_MAX - 4095. Fixes: a8c879a7 ('RDS: Info and stats') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Ido Schimmel authored
[ Upstream commit 1ebd47ef ] When removing a port's netdevice in 'rocker_remove_ports', we should also free the allocated 'net_device' structure. Do that by calling 'free_netdev' after unregistering it. Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@resnulli.us> Fixes: 4b8ac966 ("rocker: introduce rocker switch driver") Acked-by:
Scott Feldman <sfeldma@gmail.com> Signed-off-by:
-
Daniel Borkmann authored
[ Upstream commit 28e6b67f ] Since commit 55334a5d ("net_sched: act: refuse to remove bound action outside"), we end up with a wrong reference count for a tc action. Test case 1: FOO="1,6 0 0 4294967295," BAR="1,6 0 0 4294967294," tc filter add dev foo parent 1: bpf bytecode "$FOO" flowid 1:1 \ action bpf bytecode "$FOO" tc actions show action bpf action order 0: bpf bytecode '1,6 0 0 4294967295' default-action pipe index 1 ref 1 bind 1 tc actions replace action bpf bytecode "$BAR" index 1 tc actions show action bpf action order 0: bpf bytecode '1,6 0 0 4294967294' default-action pipe index 1 ref 2 bind 1 tc actions replace action bpf bytecode "$FOO" index 1 tc actions show action bpf action order 0: bpf bytecode '1,6 0 0 4294967295' default-action pipe index 1 ref 3 bind 1 Test case 2: FOO="1,6 0 0 4294967295," tc filter add dev foo parent 1: bpf bytecode "$FOO" flowid 1:1 action ok tc actions show action gact action order 0: gact action pass random type none pass val 0 index 1 ref 1 bind 1 tc actions add action drop index 1 RTNETLINK answers: File exists [...] tc actions show action gact action order 0: gact action pass random type none pass val 0 index 1 ref 2 bind 1 tc actions add action drop index 1 RTNETLINK answers: File exists [...] tc actions show action gact action order 0: gact action pass random type none pass val 0 index 1 ref 3 bind 1 What happens is that in tcf_hash_check(), we check tcf_common for a given index and increase tcfc_refcnt and conditionally tcfc_bindcnt when we've found an existing action. Now there are the following cases: 1) We do a late binding of an action. In that case, we leave the tcfc_refcnt/tcfc_bindcnt increased and are done with the ->init() handler. This is correctly handeled. 2) We replace the given action, or we try to add one without replacing and find out that the action at a specific index already exists (thus, we go out with error in that case). In case of 2), we have to undo the reference count increase from tcf_hash_check() in the tcf_hash_check() function. Currently, we fail to do so because of the 'tcfc_bindcnt > 0' check which bails out early with an -EPERM error. Now, while commit 55334a5d prevents 'tc actions del action ...' on an already classifier-bound action to drop the reference count (which could then become negative, wrap around etc), this restriction only accounts for invocations outside a specific action's ->init() handler. One possible solution would be to add a flag thus we possibly trigger the -EPERM ony in situations where it is indeed relevant. After the patch, above test cases have correct reference count again. Fixes: 55334a5d ("net_sched: act: refuse to remove bound action outside") Signed-off-by:
-
Daniel Borkmann authored
[ Upstream commit f4eaed28 ] We currently trigger multiple memory leaks when replacing bpf actions, besides others: comm "tc", pid 1909, jiffies 4294851310 (age 1602.796s) hex dump (first 32 bytes): 01 00 00 00 03 00 00 00 00 00 00 00 00 00 00 00 ................ 18 b0 98 6d 00 88 ff ff 00 00 00 00 00 00 00 00 ...m............ backtrace: [<ffffffff817e623e>] kmemleak_alloc+0x4e/0xb0 [<ffffffff8120a22d>] __vmalloc_node_range+0x1bd/0x2c0 [<ffffffff8120a37a>] __vmalloc+0x4a/0x50 [<ffffffff811a8d0a>] bpf_prog_alloc+0x3a/0xa0 [<ffffffff816c0684>] bpf_prog_create+0x44/0xa0 [<ffffffffa09ba4eb>] tcf_bpf_init+0x28b/0x3c0 [act_bpf] [<ffffffff816d7001>] tcf_action_init_1+0x191/0x1b0 [<ffffffff816d70a2>] tcf_action_init+0x82/0xf0 [<ffffffff816d4d12>] tcf_exts_validate+0xb2/0xc0 [<ffffffffa09b5838>] cls_bpf_modify_existing+0x98/0x340 [cls_bpf] [<ffffffffa09b5cd6>] cls_bpf_change+0x1a6/0x274 [cls_bpf] [<ffffffff816d56e5>] tc_ctl_tfilter+0x335/0x910 [<ffffffff816b9145>] rtnetlink_rcv_msg+0x95/0x240 [<ffffffff816df34f>] netlink_rcv_skb+0xaf/0xc0 [<ffffffff816b909e>] rtnetlink_rcv+0x2e/0x40 [<ffffffff816deaaf>] netlink_unicast+0xef/0x1b0 Issue is that the old content from tcf_bpf is allocated and needs to be released when we replace it. We seem to do that since the beginning of act_bpf on the filter and insns, later on the name as well. Example test case, after patch: # FOO="1,6 0 0 4294967295," # BAR="1,6 0 0 4294967294," # tc actions add action bpf bytecode "$FOO" index 2 # tc actions show action bpf action order 0: bpf bytecode '1,6 0 0 4294967295' default-action pipe index 2 ref 1 bind 0 # tc actions replace action bpf bytecode "$BAR" index 2 # tc actions show action bpf action order 0: bpf bytecode '1,6 0 0 4294967294' default-action pipe index 2 ref 1 bind 0 # tc actions replace action bpf bytecode "$FOO" index 2 # tc actions show action bpf action order 0: bpf bytecode '1,6 0 0 4294967295' default-action pipe index 2 ref 1 bind 0 # tc actions del action bpf index 2 [...] # echo "scan" > /sys/kernel/debug/kmemleak # cat /sys/kernel/debug/kmemleak | grep "comm \"tc\"" | wc -l 0 Fixes: d23b8ad8 ("tc: add BPF based action") Signed-off-by:
-
Alexander Drozdov authored
[ Upstream commit dbd46ab4 ] tpacket_fill_skb() can return a negative value (-errno) which is stored in tp_len variable. In that case the following condition will be (but shouldn't be) true: tp_len > dev->mtu + dev->hard_header_len as dev->mtu and dev->hard_header_len are both unsigned. That may lead to just returning an incorrect EMSGSIZE errno to the user. Fixes: 52f1454f ("packet: allow to transmit +4 byte in TX_RING slot for VLAN case") Signed-off-by:
Alexander Drozdov <al.drozdov@gmail.com> Acked-by:
-
Lars Westerhoff authored
[ Upstream commit 158cd4af ] When binding a PF_PACKET socket, the use count of the bound interface is always increased with dev_hold in dev_get_by_{index,name}. However, when rebound with the same protocol and device as in the previous bind the use count of the interface was not decreased. Ultimately, this caused the deletion of the interface to fail with the following message: unregister_netdevice: waiting for dummy0 to become free. Usage count = 1 This patch moves the dev_put out of the conditional part that was only executed when either the protocol or device changed on a bind. Fixes: 902fefb8 ('packet: improve socket create/bind latency in some cases') Signed-off-by:
Lars Westerhoff <lars.westerhoff@newtec.eu> Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Signed-off-by:
-
Alexander Duyck authored
[ Upstream commit 1513069e ] It was reported that update_suffix was taking a long time on systems where a large number of leaves were attached to a single node. As it turns out fib_table_flush was calling update_suffix for each leaf that didn't have all of the aliases stripped from it. As a result, on this large node removing one leaf would result in us calling update_suffix for every other leaf on the node. The fix is to just remove the calls to leaf_pull_suffix since they are redundant as we already have a call in resize that will go through and update the suffix length for the node before we exit out of fib_table_flush or fib_table_flush_external. Reported-by:
David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
-
Jack Morgenstein authored
[ Upstream commit 1c1bf349 ] The port-change event processing in procedure mlx4_eq_int() uses "slave" as the vf_oper array index. Since the value of "slave" is the PF function index, the result is that the PF link state is used for deciding to propagate the event for all the VFs. The VF link state should be used, so the VF function index should be used here. Fixes: 948e306d ('net/mlx4: Add VF link state support') Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
Matan Barak <matanb@mellanox.com> Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
-
Nikolay Aleksandrov authored
[ Upstream commit 963ad948 ] Since slave_changelink support was added there have been a few race conditions when using br_setport() since some of the port functions it uses require the bridge lock. It is very easy to trigger a lockup due to some internal spin_lock() usage without bh disabled, also it's possible to get the bridge into an inconsistent state. Signed-off-by:
-
Michael S. Tsirkin authored
[ Upstream commit 75993300 ] ANY_LAYOUT is a compatibility feature. It's implied for VERSION_1 devices, and non-transitional devices might not offer it. Change code to behave accordingly. Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Reviewed-by:
Paolo Bonzini <pbonzini@redhat.com> Reviewed-by:
Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by:
-
Florian Westphal authored
[ Upstream commit 0470eb99 ] Kirill A. Shutemov says: This simple test-case trigers few locking asserts in kernel: int main(int argc, char **argv) { unsigned int block_size = 16 * 4096; struct nl_mmap_req req = { .nm_block_size = block_size, .nm_block_nr = 64, .nm_frame_size = 16384, .nm_frame_nr = 64 * block_size / 16384, }; unsigned int ring_size; int fd; fd = socket(AF_NETLINK, SOCK_RAW, NETLINK_GENERIC); if (setsockopt(fd, SOL_NETLINK, NETLINK_RX_RING, &req, sizeof(req)) < 0) exit(1); if (setsockopt(fd, SOL_NETLINK, NETLINK_TX_RING, &req, sizeof(req)) < 0) exit(1); ring_size = req.nm_block_nr * req.nm_block_size; mmap(NULL, 2 * ring_size, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0); return 0; } +++ exited with 0 +++ BUG: sleeping function called from invalid context at /home/kas/git/public/linux-mm/kernel/locking/mutex.c:616 in_atomic(): 1, irqs_disabled(): 0, pid: 1, name: init 3 locks held by init/1: #0: (reboot_mutex){+.+...}, at: [<ffffffff81080959>] SyS_reboot+0xa9/0x220 #1: ((reboot_notifier_list).rwsem){.+.+..}, at: [<ffffffff8107f379>] __blocking_notifier_call_chain+0x39/0x70 #2: (rcu_callback){......}, at: [<ffffffff810d32e0>] rcu_do_batch.isra.49+0x160/0x10c0 Preemption disabled at:[<ffffffff8145365f>] __delay+0xf/0x20 CPU: 1 PID: 1 Comm: init Not tainted 4.1.0-00009-gbddf4c4818e0 #253 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS Debian-1.8.2-1 04/01/2014 ffff88017b3d8000 ffff88027bc03c38 ffffffff81929ceb 0000000000000102 0000000000000000 ffff88027bc03c68 ffffffff81085a9d 0000000000000002 ffffffff81ca2a20 0000000000000268 0000000000000000 ffff88027bc03c98 Call Trace: <IRQ> [<ffffffff81929ceb>] dump_stack+0x4f/0x7b [<ffffffff81085a9d>] ___might_sleep+0x16d/0x270 [<ffffffff81085bed>] __might_sleep+0x4d/0x90 [<ffffffff8192e96f>] mutex_lock_nested+0x2f/0x430 [<ffffffff81932fed>] ? _raw_spin_unlock_irqrestore+0x5d/0x80 [<ffffffff81464143>] ? __this_cpu_preempt_check+0x13/0x20 [<ffffffff8182fc3d>] netlink_set_ring+0x1ed/0x350 [<ffffffff8182e000>] ? netlink_undo_bind+0x70/0x70 [<ffffffff8182fe20>] netlink_sock_destruct+0x80/0x150 [<ffffffff817e484d>] __sk_free+0x1d/0x160 [<ffffffff817e49a9>] sk_free+0x19/0x20 [..] Cong Wang says: We can't hold mutex lock in a rcu callback, [..] Thomas Graf says: The socket should be dead at this point. It might be simpler to add a netlink_release_ring() function which doesn't require locking at all. Reported-by:
"Kirill A. Shutemov" <kirill@shutemov.name> Diagnosed-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Edward Hyunkoo Jee authored
[ Upstream commit 0848f642 ] When ip_frag_queue() computes positions, it assumes that the passed sk_buff does not contain L2 headers. However, when PACKET_FANOUT_FLAG_DEFRAG is used, IP reassembly functions can be called on outgoing packets that contain L2 headers. Also, IPv4 checksum is not corrected after reassembly. Fixes: 7736d33f ("packet: Add pre-defragmentation support for ipv4 fanouts.") Signed-off-by:
Edward Hyunkoo Jee <edjee@google.com> Signed-off-by:
-
Daniel Borkmann authored
[ Upstream commit 32b2f4b1 ] The following test case causes a NULL pointer dereference in cls_flow: tc filter add dev foo parent 1: handle 0x1 flow hash keys dst action ok tc filter replace dev foo parent 1: pref 49152 handle 0x1 \ flow hash keys mark action drop To be more precise, actually two different panics are fixed, the first occurs because tcf_exts_init() is not called on the newly allocated filter when we do a replace. And the second panic uncovered after that happens since the arguments of list_replace_rcu() are swapped, the old element needs to be the first argument and the new element the second. Fixes: 70da9f0b ("net: sched: cls_flow use RCU") Signed-off-by:
John Fastabend <john.r.fastabend@intel.com> Signed-off-by:
-
Daniel Borkmann authored
[ Upstream commit f6bfc46d ] The following test case causes a NULL pointer dereference in cls_bpf: FOO="1,6 0 0 4294967295," tc filter add dev foo parent 1: bpf bytecode "$FOO" flowid 1:1 action ok tc filter replace dev foo parent 1: pref 49152 handle 0x1 \ bpf bytecode "$FOO" flowid 1:1 action drop The problem is that commit 1f947bf1 ("net: sched: rcu'ify cls_bpf") accidentally swapped the arguments of list_replace_rcu(), the old element needs to be the first argument and the new element the second. Fixes: 1f947bf1 ("net: sched: rcu'ify cls_bpf") Signed-off-by:
-
dingtianhong authored
[ Upstream commit a951bc1e ] The "follow" fail_over_mac policy is useful for multiport devices that either become confused or incur a performance penalty when multiple ports are programmed with the same MAC address, but the same MAC address still may happened by this steps for this policy: 1) echo +eth0 > /sys/class/net/bond0/bonding/slaves bond0 has the same mac address with eth0, it is MAC1. 2) echo +eth1 > /sys/class/net/bond0/bonding/slaves eth1 is backup, eth1 has MAC2. 3) ifconfig eth0 down eth1 became active slave, bond will swap MAC for eth0 and eth1, so eth1 has MAC1, and eth0 has MAC2. 4) ifconfig eth1 down there is no active slave, and eth1 still has MAC1, eth2 has MAC2. 5) ifconfig eth0 up the eth0 became active slave again, the bond set eth0 to MAC1. Something wrong here, then if you set eth1 up, the eth0 and eth1 will have the same MAC address, it will break this policy for ACTIVE_BACKUP mode. This patch will fix this problem by finding the old active slave and swap them MAC address before change active slave. Signed-off-by:
Ding Tianhong <dingtianhong@huawei.com> Tested-by:
-
Herbert Xu authored
[ Upstream commit fdbf5b09 ] This patch reverts 19424e05 ("sit: Add gro callbacks to sit_offload") because it generates packets that cannot be handled even by our own GSO. Reported-by:
Wolfgang Walter <linux@stwm.de> Signed-off-by:
-
Nikolay Aleksandrov authored
[ Upstream commit 06f6d109 ] When the bonding is being unloaded and the netdevice notifier is unregistered it executes NETDEV_UNREGISTER for each device which should remove the bond's proc entry but if the device enslaved is not of ARPHRD_ETHER type and is in front of the bonding, it may execute bond_release_and_destroy() first which would release the last slave and destroy the bond device leaving the proc entry and thus we will get the following error (with dynamic debug on for bond_netdev_event to see the events order): [ 908.963051] eql: event: 9 [ 908.963052] eql: IFF_SLAVE [ 908.963054] eql: event: 2 [ 908.963056] eql: IFF_SLAVE [ 908.963058] eql: event: 6 [ 908.963059] eql: IFF_SLAVE [ 908.963110] bond0: Releasing active interface eql [ 908.976168] bond0: Destroying bond bond0 [ 908.976266] bond0 (unregistering): Released all slaves [ 908.984097] ------------[ cut here ]------------ [ 908.984107] WARNING: CPU: 0 PID: 1787 at fs/proc/generic.c:575 remove_proc_entry+0x112/0x160() [ 908.984110] remove_proc_entry: removing non-empty directory 'net/bonding', leaking at least 'bond0' [ 908.984111] Modules linked in: bonding(-) eql(O) 9p nfsd auth_rpcgss oid_registry nfs_acl nfs lockd grace fscache sunrpc crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel ppdev qxl drm_kms_helper snd_hda_codec_generic aesni_intel ttm aes_x86_64 glue_helper pcspkr lrw gf128mul ablk_helper cryptd snd_hda_intel virtio_console snd_hda_codec psmouse serio_raw snd_hwdep snd_hda_core 9pnet_virtio 9pnet evdev joydev drm virtio_balloon snd_pcm snd_timer snd soundcore i2c_piix4 i2c_core pvpanic acpi_cpufreq parport_pc parport processor thermal_sys button autofs4 ext4 crc16 mbcache jbd2 hid_generic usbhid hid sg sr_mod cdrom ata_generic virtio_blk virtio_net floppy ata_piix e1000 libata ehci_pci virtio_pci scsi_mod uhci_hcd ehci_hcd virtio_ring virtio usbcore usb_common [last unloaded: bonding] [ 908.984168] CPU: 0 PID: 1787 Comm: rmmod Tainted: G W O 4.2.0-rc2+ #8 [ 908.984170] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 908.984172] 0000000000000000 ffffffff81732d41 ffffffff81525b34 ffff8800358dfda8 [ 908.984175] ffffffff8106c521 ffff88003595af78 ffff88003595af40 ffff88003e3a4280 [ 908.984178] ffffffffa058d040 0000000000000000 ffffffff8106c59a ffffffff8172ebd0 [ 908.984181] Call Trace: [ 908.984188] [<ffffffff81525b34>] ? dump_stack+0x40/0x50 [ 908.984193] [<ffffffff8106c521>] ? warn_slowpath_common+0x81/0xb0 [ 908.984196] [<ffffffff8106c59a>] ? warn_slowpath_fmt+0x4a/0x50 [ 908.984199] [<ffffffff81218352>] ? remove_proc_entry+0x112/0x160 [ 908.984205] [<ffffffffa05850e6>] ? bond_destroy_proc_dir+0x26/0x30 [bonding] [ 908.984208] [<ffffffffa057540e>] ? bond_net_exit+0x8e/0xa0 [bonding] [ 908.984217] [<ffffffff8142f407>] ? ops_exit_list.isra.4+0x37/0x70 [ 908.984225] [<ffffffff8142f52d>] ? unregister_pernet_operations+0x8d/0xd0 [ 908.984228] [<ffffffff8142f58d>] ? unregister_pernet_subsys+0x1d/0x30 [ 908.984232] [<ffffffffa0585269>] ? bonding_exit+0x23/0xdba [bonding] [ 908.984236] [<ffffffff810e28ba>] ? SyS_delete_module+0x18a/0x250 [ 908.984241] [<ffffffff81086f99>] ? task_work_run+0x89/0xc0 [ 908.984244] [<ffffffff8152b732>] ? entry_SYSCALL_64_fastpath+0x16/0x75 [ 908.984247] ---[ end trace 7c006ed4abbef24b ]--- Thus remove the proc entry manually if bond_release_and_destroy() is used. Because of the checks in bond_remove_proc_entry() it's not a problem for a bond device to change namespaces (the bug fixed by the Fixes commit) but since commit f9399814 ("bonding: Don't allow bond devices to change network namespaces.") that can't happen anyway. Reported-by:
Carol Soto <clsoto@linux.vnet.ibm.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 03645a11 ] ip6_datagram_connect() is doing a lot of socket changes without socket being locked. This looks wrong, at least for udp_lib_rehash() which could corrupt lists because of concurrent udp_sk(sk)->udp_portaddr_hash accesses. Signed-off-by:
-
Tilman Schmidt authored
[ Upstream commit fd98e941 ] Commit 79901317 ("n_tty: Don't flush buffer when closing ldisc"), first merged in kernel release 3.10, caused the following regression in the Gigaset M101 driver: Before that commit, when closing the N_TTY line discipline in preparation to switching to N_GIGASET_M101, receive_room would be reset to a non-zero value by the call to n_tty_flush_buffer() in n_tty's close method. With the removal of that call, receive_room might be left at zero, blocking data reception on the serial line. The present patch fixes that regression by setting receive_room to an appropriate value in the ldisc open method. Fixes: 79901317 ("n_tty: Don't flush buffer when closing ldisc") Signed-off-by:
Tilman Schmidt <tilman@imap.cc> Signed-off-by:
-
WANG Cong authored
[ Upstream commit 052cbda4 ] Fixes: 25331d6c ("net: sched: implement qstat helper routines") Cc: John Fastabend <john.fastabend@gmail.com> Signed-off-by:
-
Nikolay Aleksandrov authored
[ Upstream commit 5ebc7846 ] Since the mdb add/del code was introduced there have been 2 br_mdb_notify calls when doing br_mdb_add() resulting in 2 notifications on each add. Example: Command: bridge mdb add dev br0 port eth1 grp 239.0.0.1 permanent Before patch: root@debian:~# bridge monitor all [MDB]dev br0 port eth1 grp 239.0.0.1 permanent [MDB]dev br0 port eth1 grp 239.0.0.1 permanent After patch: root@debian:~# bridge monitor all [MDB]dev br0 port eth1 grp 239.0.0.1 permanent Signed-off-by:
-
Herbert Xu authored
[ Upstream commit a0a2a660 ] The commit 738ac1eb ("net: Clone skb before setting peeked flag") introduced a use-after-free bug in skb_recv_datagram. This is because skb_set_peeked may create a new skb and free the existing one. As it stands the caller will continue to use the old freed skb. This patch fixes it by making skb_set_peeked return the new skb (or the old one if unchanged). Fixes: 738ac1eb ("net: Clone skb before setting peeked flag") Reported-by:
Brenden Blanco <bblanco@plumgrid.com> Signed-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by:
-
Herbert Xu authored
[ Upstream commit 89c22d8c ] When we calculate the checksum on the recv path, we store the result in the skb as an optimisation in case we need the checksum again down the line. This is in fact bogus for the MSG_PEEK case as this is done without any locking. So multiple threads can peek and then store the result to the same skb, potentially resulting in bogus skb states. This patch fixes this by only storing the result if the skb is not shared. This preserves the optimisations for the few cases where it can be done safely due to locking or other reasons, e.g., SIOCINQ. Signed-off-by:
-
