- 20 Jun, 2024 9 commits
-
-
John Garry authored
Currently blk_queue_get_max_sectors() is passed a enum req_op. In future the value returned from blk_queue_get_max_sectors() may depend on certain request flags, so pass a request pointer. Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Keith Busch <kbusch@kernel.org> Reviewed-by:
Luis Chamberlain <mcgrof@kernel.org> Reviewed-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
John Garry <john.g.garry@oracle.com> Reviewed-by:
Hannes Reinecke <hare@suse.de> Acked-by:
Darrick J. Wong <djwong@kernel.org> Reviewed-by:
Jens Axboe <axboe@kernel.dk>
-
Jens Axboe authored
Merge in queue limits cleanups. * for-6.11/block-limits: block: move the raid_partial_stripes_expensive flag into the features field block: remove the discard_alignment flag block: move the misaligned flag into the features field block: renumber and rename the cache disabled flag block: fix spelling and grammar for in writeback_cache_control.rst block: remove the unused blk_bounce enum
-
Andreas Hindborg authored
`blk_queue_flag_set` and `blk_queue_flag_clear` was removed in favor of a new API. This caused a build error for Rust block device abstractions. Thus, use the new feature passing API instead of the old removed API. Fixes: bd4a633b ("block: move the nonrot flag to queue_limits") Signed-off-by:
Andreas Hindborg <a.hindborg@samsung.com> Link: https://lore.kernel.org/r/20240620085721.1218296-1-nmi@metaspace.dkSigned-off-by:
-
Christoph Hellwig authored
Move the raid_partial_stripes_expensive flags into the features field to reclaim a little bit of space. Signed-off-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20240619154623.450048-7-hch@lst.deSigned-off-by:
-
Christoph Hellwig authored
queue_limits.discard_alignment is never read except in the places where it is stacked into another limit. Signed-off-by:
-
Christoph Hellwig authored
Move the misaligned flags into the features field to reclaim a little bit of space. Signed-off-by:
-
Christoph Hellwig authored
Start with the first bit, and drop the plural-S from the name. Signed-off-by:
-
Christoph Hellwig authored
Suggested-by:
Damien Le Moal <dlemoal@kernel.org> Signed-off-by:
-
Christoph Hellwig authored
The enum has been replaced with the BLK_FEAT_BOUNCE_HIGH flag. Reported-by:
-
- 19 Jun, 2024 30 commits
-
-
Jens Axboe authored
Merge in last round of queue limits changes from Christoph. * for-6.11/block-limits: (26 commits) block: move the bounce flag into the features field block: move the skip_tagset_quiesce flag to queue_limits block: move the pci_p2pdma flag to queue_limits block: move the zone_resetall flag to queue_limits block: move the zoned flag into the features field block: move the poll flag to queue_limits block: move the dax flag to queue_limits block: move the nowait flag to queue_limits block: move the synchronous flag to queue_limits block: move the stable_writes flag to queue_limits block: move the io_stat flag setting to queue_limits block: move the add_random flag to queue_limits block: move the nonrot flag to queue_limits block: move cache control settings out of queue->flags block: remove blk_flush_policy block: freeze the queue in queue_attr_store nbd: move setting the cache control flags to __nbd_set_size virtio_blk: remove virtblk_update_cache_mode loop: fold loop_update_rotational into loop_reconfigure_limits loop: also use the default block size from an underlying block device ... Signed-off-by: -
Christoph Hellwig authored
Move the bounce flag into the features field to reclaim a little bit of space. Signed-off-by:
-
Christoph Hellwig authored
Move the skip_tagset_quiesce flag into the queue_limits feature field so that it can be set atomically with the queue frozen. Signed-off-by:
-
Christoph Hellwig authored
Move the pci_p2pdma flag into the queue_limits feature field so that it can be set atomically with the queue frozen. Signed-off-by:
-
Christoph Hellwig authored
Move the zone_resetall flag into the queue_limits feature field so that it can be set atomically with the queue frozen. Signed-off-by:
-
Christoph Hellwig authored
Move the zoned flags into the features field to reclaim a little bit of space. Signed-off-by:
-
Christoph Hellwig authored
Move the poll flag into the queue_limits feature field so that it can be set atomically with the queue frozen. Stacking drivers are simplified in that they now can simply set the flag, and blk_stack_limits will clear it when the features is not supported by any of the underlying devices. Signed-off-by:
-
Christoph Hellwig authored
Move the dax flag into the queue_limits feature field so that it can be set atomically with the queue frozen. Signed-off-by:
-
Christoph Hellwig authored
Move the nowait flag into the queue_limits feature field so that it can be set atomically with the queue frozen. Stacking drivers are simplified in that they now can simply set the flag, and blk_stack_limits will clear it when the features is not supported by any of the underlying devices. Signed-off-by:
-
Christoph Hellwig authored
Move the synchronous flag into the queue_limits feature field so that it can be set atomically with the queue frozen. Signed-off-by:
-
Christoph Hellwig authored
Move the stable_writes flag into the queue_limits feature field so that it can be set atomically with the queue frozen. The flag is now inherited by blk_stack_limits, which greatly simplifies the code in dm, and fixed md which previously did not pass on the flag set on lower devices. Signed-off-by:
-
Christoph Hellwig authored
Move the io_stat flag into the queue_limits feature field so that it can be set atomically with the queue frozen. Simplify md and dm to set the flag unconditionally instead of avoiding setting a simple flag for cases where it already is set by other means, which is a bit pointless. Signed-off-by:
-
Christoph Hellwig authored
Move the add_random flag into the queue_limits feature field so that it can be set atomically with the queue frozen. Note that this also removes code from dm to clear the flag based on the underlying devices, which can't be reached as dm devices will always start out without the flag set. Signed-off-by:
-
Christoph Hellwig authored
Move the nonrot flag into the queue_limits feature field so that it can be set atomically with the queue frozen. Use the chance to switch to defaulting to non-rotational and require the driver to opt into rotational, which matches the polarity of the sysfs interface. For the z2ram, ps3vram, 2x memstick, ubiblock and dcssblk the new rotational flag is not set as they clearly are not rotational despite this being a behavior change. There are some other drivers that unconditionally set the rotational flag to keep the existing behavior as they arguably can be used on rotational devices even if that is probably not their main use today (e.g. virtio_blk and drbd). The flag is automatically inherited in blk_stack_limits matching the existing behavior in dm and md. Signed-off-by:
-
Christoph Hellwig authored
Move the cache control settings into the queue_limits so that the flags can be set atomically with the device queue frozen. Add new features and flags field for the driver set flags, and internal (usually sysfs-controlled) flags in the block layer. Note that we'll eventually remove enough field from queue_limits to bring it back to the previous size. The disable flag is inverted compared to the previous meaning, which means it now survives a rescan, similar to the max_sectors and max_discard_sectors user limits. The FLUSH and FUA flags are now inherited by blk_stack_limits, which simplified the code in dm a lot, but also causes a slight behavior change in that dm-switch and dm-unstripe now advertise a write cache despite setting num_flush_bios to 0. The I/O path will handle this gracefully, but as far as I can tell the lack of num_flush_bios and thus flush support is a pre-existing data integrity bug in those targets that really needs fixing, after which a non-zero num_flush_bios should be required in dm for targets that map to underlying devices. Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by:
-
Christoph Hellwig authored
Fold blk_flush_policy into the only caller to prepare for pending changes to it. Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Reviewed-by:
Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20240617060532.127975-13-hch@lst.deSigned-off-by:
-
Christoph Hellwig authored
queue_attr_store updates attributes used to control generating I/O, and can cause malformed bios if changed with I/O in flight. Freeze the queue in common code instead of adding it to almost every attribute. Signed-off-by:
-
Christoph Hellwig authored
Move setting the cache control flags in nbd in preparation for moving these flags into the queue_limits structure. Signed-off-by:
Josef Bacik <josef@toxicpanda.com> Reviewed-by:
-
Christoph Hellwig authored
virtblk_update_cache_mode boils down to a single call to blk_queue_write_cache. Remove it in preparation for moving the cache control flags into the queue_limits. Signed-off-by:
Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by:
-
Christoph Hellwig authored
This prepares for moving the rotational flag into the queue_limits and also fixes it for the case where the loop device is backed by a block device. Signed-off-by:
-
Christoph Hellwig authored
Fix the code in loop_reconfigure_limits to pick a default block size for O_DIRECT file descriptors to also work when the loop device sits on top of a block device and not just on a regular file on a block device based file system. Signed-off-by:
-
Christoph Hellwig authored
The LOOP_CONFIGURE path automatically upgrades the block size to that of the underlying file for O_DIRECT file descriptors, but the LOOP_SET_BLOCK_SIZE path does not. Fix this by lifting the code to pick the block size into common code. Signed-off-by:
-
Christoph Hellwig authored
Simplify loop_reconfigure_limits by always updating the discard limits. This adds a little more work to loop_set_block_size, but doesn't change the outcome as the discard flag won't change. Signed-off-by:
-
Christoph Hellwig authored
__loop_clr_fd wants to clear all settings on the device. Prepare for moving more settings into the block limits by open coding loop_reconfigure_limits. Signed-off-by:
-
Christoph Hellwig authored
Move a bit of code that sets up the zone flag and the write granularity into sd_zbc_read_zones to be with the rest of the zoned limits. Signed-off-by:
-
Christoph Hellwig authored
Since commit 7437bb73 ("block: remove support for the host aware zone model"), only ZBC devices expose a zoned access model. sd_is_zoned is used to check for that and thus return false for host aware devices. Replace the helper with the simple open coded TYPE_ZBC check to fix this. Fixes: 7437bb73 ("block: remove support for the host aware zone model") Signed-off-by:
-
Christoph Hellwig authored
blkfront always had a robust negotiation protocol for detecting a write cache. Stop simply disabling cache flushes in the block layer as the flags handling is moving to the atomic queue limits API that needs user context to freeze the queue for that. Instead handle the case of the feature flags cleared inside of blkfront. This removes old debug code to check for such a mismatch which was previously impossible to hit, including the check for passthrough requests that blkfront never used to start with. Signed-off-by:
Roger Pau Monné <roger.pau@citrix.com> Reviewed-by:
-
Jeff Johnson authored
With ARCH=m68k, make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/block/z2ram.o Add the missing invocation of the MODULE_DESCRIPTION() macro. Signed-off-by:
Jeff Johnson <quic_jjohnson@quicinc.com> Reviewed-by:
Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by:
-
Jeff Johnson authored
With ARCH=m68k, make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/block/ataflop.o Add the missing invocation of the MODULE_DESCRIPTION() macro. Signed-off-by:
-
Jeff Johnson authored
With ARCH=m68k, make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/block/amiflop.o Add the missing invocation of the MODULE_DESCRIPTION() macro. Signed-off-by:
-
- 18 Jun, 2024 1 commit
-
-
Yu Kuai authored
After commit 35fe6d76 ("block: use standard blktrace API to output cgroup info for debug notes"), the field 'bfqg->blkg_path' is not used and hence can be removed, and therefor blkg_path() is not used anymore and can be removed. Signed-off-by:
Yu Kuai <yukuai3@huawei.com> Reviewed-by:
Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20240618032753.3502528-1-yukuai1@huaweicloud.comSigned-off-by:
-
