- 25 Jan, 2024 1 commit
-
-
Dmitry Baryshkov authored
Lower the requested CFG bus bandwidth for the SDM670 platform. The default value is 153600 kBps, which is twice as big as required by the platform according to the vendor kernel. Fixes: a55c8ff2 ("drm/msm/mdss: Handle the reg bus ICC path") Signed-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by:
Abhinav Kumar <quic_abhinavk@quicinc.com> Tested-by:
Richard Acayan <mailingradian@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/572182/ Link: https://lore.kernel.org/r/20231215013222.827975-1-dmitry.baryshkov@linaro.orgSigned-off-by:
-
- 24 Jan, 2024 4 commits
-
-
Abhinav Kumar authored
The commit 8b45a26f ("drm/msm/dpu: reserve cdm blocks for writeback in case of YUV output") introduced a smatch warning about another conditional block in dpu_encoder_helper_phys_cleanup() which had assumed hw_pp will always be valid which may not necessarily be true. Lets fix the other conditional block by making sure hw_pp is valid before dereferencing it. Reported-by:
Dan Carpenter <dan.carpenter@linaro.org> Fixes: ae4d721c ("drm/msm/dpu: add an API to reset the encoder related hw blocks") Reviewed-by:
-
Kuogee Hsieh authored
MSA MISC0 bit 1 to 7 contains Colorimetry Indicator Field. dp_link_get_colorimetry_config() returns wrong colorimetry value in the DP_TEST_DYNAMIC_RANGE_CEA case in the current implementation. Hence fix this problem by having dp_link_get_colorimetry_config() return defined CEA RGB colorimetry value in the case of DP_TEST_DYNAMIC_RANGE_CEA. Changes in V2: -- drop retrieving colorimetry from colorspace -- drop dr = link->dp_link.test_video.test_dyn_range assignment Changes in V3: -- move defined MISCr0a Colorimetry vale to dp_reg.h -- rewording commit title -- rewording commit text to more precise describe this patch Fixes: c943b494 ("drm/msm/dp: add displayPort driver support") Signed-off-by:
Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by:
-
Kuogee Hsieh authored
Since the value of DP_TEST_BIT_DEPTH_8 is already left shifted, in the BPC unknown case, the additional shift causes spill over to the other bits of the [DP_CONFIGURATION_CTRL] register. Fix this by changing the return value of dp_link_get_test_bits_depth() in the BPC unknown case to (DP_TEST_BIT_DEPTH_8 >> DP_TEST_BIT_DEPTH_SHIFT). Fixes: c943b494 ("drm/msm/dp: add displayPort driver support") Signed-off-by:
-
Randy Dunlap authored
Correct all kernel-doc warnings in dpu_encoder.c and dpu_rm.c: dpu_encoder.c:212: warning: Excess struct member 'crtc_kickoff_cb' description in 'dpu_encoder_virt' dpu_encoder.c:212: warning: Excess struct member 'crtc_kickoff_cb_data' description in 'dpu_encoder_virt' dpu_encoder.c:212: warning: Excess struct member 'debugfs_root' description in 'dpu_encoder_virt' dpu_rm.c:35: warning: Excess struct member 'hw_res' description in 'dpu_rm_requirements' dpu_rm.c:208: warning: No description found for return value of '_dpu_rm_get_lm_peer' Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Rob Clark <robdclark@gmail.com> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Sean Paul <sean@poorly.run> Cc: Marijn Suijten <marijn.suijten@somainline.org> Cc: linux-arm-msm@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: freedreno@lists.freedesktop.org Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Vegard Nossum <vegard.nossum@oracle.com> Reviewed-by:
Paloma Arellano <quic_parellan@quicinc.com> Reviewed-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202312170641.5exlvQQx-lkp@intel.com/ Fixes: 62d35629 ("drm/msm/dpu: move encoder status to standard encoder debugfs dir") Fixes: 25fdd593 ("drm/msm: Add SDM845 DPU support") Patchwork: https://patchwork.freedesktop.org/patch/572962/ Link: https://lore.kernel.org/r/20231231060823.1934-1-rdunlap@infradead.orgSigned-off-by:
-
- 14 Dec, 2023 25 commits
-
-
Dmitry Baryshkov authored
The funcion dp_display_get_next_bridge() can return -EPROBE_DEFER if the next bridge is not (yet) available. However returning -EPROBE_DEFER from msm_dp_modeset_init() is not ideal. This leads to -EPROBE return from component_bind, which can easily result in -EPROBE_DEFR loops. Signed-off-by:
Bjorn Andersson <quic_bjorande@quicinc.com> Reviewed-by:
-
Jessica Zhang authored
Drop the enable and frame_count parameters from dpu_hw_setup_misr() as they are always set to the same values. In addition, replace MISR_FRAME_COUNT_MASK with MISR_FRAME_COUNT as frame_count is always set to the same value. Fixes: 7b37523f ("drm/msm/dpu: Move MISR methods to dpu_hw_util") Signed-off-by:
Jessica Zhang <quic_jesszhan@quicinc.com> Reviewed-by:
-
Jessica Zhang authored
Set the input_sel bit for encoders as it was missed in the initial implementation. Reported-by:
Rob Clark <robdclark@gmail.com> Closes: https://gitlab.freedesktop.org/drm/msm/-/issues/39 Fixes: 91143873 ("drm/msm/dpu: Add MISR register support for interface") Signed-off-by:
-
Dmitry Baryshkov authored
Move CSC tables out of the header file to fix following kind of warnings: In file included from drivers/gpu/drm/msm/disp/dpu1/dpu_hwio.h:8, from drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.c:5: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_util.h:54:33: warning: ‘dpu_csc10_rgb2yuv_601l’ defined but not used [-Wunused-const-variable=] 54 | static const struct dpu_csc_cfg dpu_csc10_rgb2yuv_601l = { | ^~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/msm/disp/dpu1/dpu_hw_util.h:39:33: warning: ‘dpu_csc10_YUV2RGB_601L’ defined but not used [-Wunused-const-variable=] 39 | static const struct dpu_csc_cfg dpu_csc10_YUV2RGB_601L = { | ^~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/msm/disp/dpu1/dpu_hw_util.h:24:33: warning: ‘dpu_csc_YUV2RGB_601L’ defined but not used [-Wunused-const-variable=] 24 | static const struct dpu_csc_cfg dpu_csc_YUV2RGB_601L = { | ^~~~~~~~~~~~~~~~~~~~ Signed-off-by: -
Paloma Arellano authored
Add a mutex lock to control vblank irq to synchronize vblank enable/disable operations happening from different threads to prevent race conditions while registering/unregistering the vblank irq callback. v4: -Removed vblank_ctl_lock from dpu_encoder_virt, so it is only a parameter of dpu_encoder_phys. -Switch from atomic refcnt to a simple int counter as mutex has now been added v3: Mistakenly did not change wording in last version. It is done now. v2: Slightly changed wording of commit message Signed-off-by: -
Abhinav Kumar authored
Now that CDM block support has been added to DPU lets also add its entry to the DPU snapshot to help debugging. Signed-off-by:
-
Abhinav Kumar authored
Lets rename the existing wb2_formats array wb2_formats_rgb to indicate that it has only RGB formats and can be used on any chipset having a WB block. Introduce a new wb2_formats_rgb_yuv array to the catalog to indicate support for YUV formats to writeback in addition to RGB. Chipsets which have support for CDM block will use the newly added wb2_formats_rgb_yuv array. changes in v3: - change type of wb2_formats_rgb/wb2_formats_rgb_yuv to u32 to fix checkpatch warnings Signed-off-by:
-
Abhinav Kumar authored
Reserve CDM blocks for writeback if the format of the output fb is YUV. At the moment, the reservation is done only for writeback but can easily be extended by relaxing the checks once other interfaces are ready to output YUV. changes in v3: - squash CDM disable during encoder cleanup into this change changes in v2: - use needs_cdm from topology struct - drop fb related checks from atomic_mode_set() Signed-off-by:
-
Abhinav Kumar authored
To setup and enable CDM block for the writeback pipeline, lets add the pieces together to set the active bits and the flush bits for the CDM block. changes in v2: - passed the cdm idx to update_pending_flush_cdm() (have retained the R-b as its a minor change) Signed-off-by:
-
Abhinav Kumar authored
Add an API dpu_encoder_helper_phys_setup_cdm() which can be used by the writeback encoder to setup the CDM block. Currently, this is defined and used within the writeback's physical encoder layer however, the function can be modified to be used to setup the CDM block even for non-writeback interfaces. Until those modifications are planned and made, keep it local to writeback. changes in v3: - call bind_pingpong_blk() directly as disable() is dropped - add dpu_csc10_rgb2yuv_601l to dpu_hw_util.h and use it - fix kbot error on the function doc - document that dpu_encoder_helper_phys_setup_cdm() doesn't handle DPU_CHROMA_H1V2 changes in v2: - add the RGB2YUV CSC matrix to dpu util as needed by CDM - use dpu_hw_get_csc_cfg() to get and program CSC - drop usage of setup_csc_data() and setup_cdwn() cdm ops as they both have been merged into enable() - drop reduntant hw_cdm and hw_pp checks Reported-by:
-
Abhinav Kumar authored
CDM block will need its own logic to program the flush and active bits in the dpu_hw_ctl layer. Make necessary changes in dpu_hw_ctl to support CDM programming. changes in v3: - drop unused cdm_active as reported by kbot - retained the R-b as its a trivial change changes in v2: - remove unused empty line - pass in cdm_num to update_pending_flush_cdm() Reported-by:
-
Abhinav Kumar authored
Even though there is usually only one CDM block, it can be used by either HDMI, DisplayPort OR Writeback interfaces. Hence its allocation needs to be tracked properly by the resource manager to ensure appropriate availability of the block. changes in v2: - move needs_cdm to topology struct Signed-off-by:
-
Abhinav Kumar authored
Add the RM APIs necessary to initialize and allocate CDM blocks to be used by the rest of the DPU pipeline. changes in v2: - treat cdm_init() failure as fatal - fixed the commit text Signed-off-by:
-
Abhinav Kumar authored
CDM block comes with its own set of registers and operations which can be done. In-line with other hardware blocks, this change adds the dpu_hw_cdm abstraction for the CDM block. changes in v4: - used FIELD_PREP() for dpu_hw_cdm_setup_cdwn() operations - change to lowercase hex in dpu_hw_cdm_bind_pingpong_blk() - move disable assignment inside else in dpu_hw_cdm_bind_pingpong_blk() changes in v3: - fix commit text from sub-blk to blk for CDM - fix kbot issue for missing static for dpu_hw_cdm_enable() - fix kbot issue for incorrect documentation style - add more documentation for enums and struct in dpu_hw_cdm.h - drop "enable" parameter from bind_pingpong_blk() as we can just use PINGPONG_NONE for disable cases - drop unnecessary bit operation for zero value of cdm_cfg changes in v2: - replace bit magic with relevant defines - use drmm_kzalloc instead of kzalloc/free - some formatting fixes - inline _setup_cdm_ops() - protect bind_pingpong_blk with core_rev check - drop setup_csc_data() and setup_cdwn() ops as they are merged into enable() Reported-by:
-
Abhinav Kumar authored
Add CDM blocks to the sm8250 dpu_hw_catalog to support YUV format output from writeback block. changes in v2: - re-use the cdm definition from sc7280 Signed-off-by:
-
Abhinav Kumar authored
Add CDM blocks to the sc7280 dpu_hw_catalog to support YUV format output from writeback block. changes in v3: - change the comment from sub-blk to clk for CDM changes in v2: - remove explicit zero assignment for features - move sc7280_cdm to dpu_hw_catalog from the sc7280 catalog file as its definition can be re-used Signed-off-by:
-
Abhinav Kumar authored
Since the type and usage of CSC matrices is spanning across DPU lets introduce a helper to the dpu_hw_util to return the CSC corresponding to the request type. This will help to add more supported CSC types such as the RGB to YUV one which is used in the case of CDM. changes in v3: - drop the extra wrapper and export the matrices directly Signed-off-by:
-
Abhinav Kumar authored
For YUV cases, setting the required format bits was missed out in the register programming. Lets fix it now in preparation of adding YUV formats support for writeback. changes in v2: - dropped the fixes tag as its not a fix but adding new functionality Signed-off-by: -
Abhinav Kumar authored
dpu_encoder_phys_wb_setup_cdp() is not programming the chroma down prefetch block. Its setting up the display ctl path for writeback. Hence rename it to dpu_encoder_phys_wb_setup_ctl() to match what its actually doing. Fixes: d7d0e73f ("drm/msm/dpu: introduce the dpu_encoder_phys_* for writeback") Signed-off-by:
-
Abhinav Kumar authored
In preparation for adding more formats to dpu writeback add format validation to it to fail any unsupported formats. changes in v4: - change the failure message of the API drm_atomic_helper_check_wb_connector_state() to a generic one in case it checks more errors later and moreoever it already has debug message to indicate its failure - change the corresponding DPU_ERROR to DPU_DEBUG in-line with other atomic_check failure messages changes in v3: - rebase on top of msm-next - replace drm_atomic_helper_check_wb_encoder_state() with drm_atomic_helper_check_wb_connector_state() due to the rebase changes in v2: - correct some grammar in the commit text Fixes: d7d0e73f ("drm/msm/dpu: introduce the dpu_encoder_phys_* for writeback") Signed-off-by:
-
Dmitry Baryshkov authored
The drmm handler will perform drm_encoder_cleanup() for us. Moreover if we call drm_encoder_cleanup() manually, the drmm_encoder_alloc_release() will spawn warnings at drivers/gpu/drm/drm_encoder.c:214. Drop these extra drm_encoder_cleanup() calls. Fixes: cd42c56d ("drm/msm/dpu: use drmm-managed allocation for dpu_encoder_virt") Signed-off-by:
Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by:
-
Dmitry Baryshkov authored
Add compatible string for the DisplayPort controller found on the Qualcomm SM8150 platform. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by:
-
Rob Clark authored
When we start getting these, we get a *lot*. So ratelimit it to not flood dmesg. Signed-off-by:
Rob Clark <robdclark@chromium.org> Reviewed-by:
Marijn Suijten <marijn.suijten@somainline.org> Patchwork: https://patchwork.freedesktop.org/patch/571584/ Link: https://lore.kernel.org/r/20231211182000.218088-1-robdclark@gmail.comSigned-off-by:
-
Dmitry Baryshkov authored
Enable WB2 hardware block, enabling writeback support on this platform. Signed-off-by:
-
Dmitry Baryshkov authored
Enable WB2 hardware block, enabling writeback support on this platform. Signed-off-by:
-
- 11 Dec, 2023 1 commit
-
-
Dmitry Baryshkov authored
Now as we have standard per-encoder debugfs directory, move DPU encoder status file to that directory. Signed-off-by:
-
- 10 Dec, 2023 9 commits
-
-
Dmitry Baryshkov authored
Gitlab runner can cache git repository, including the unfinished rebase merge status. New CI job will come as a fresh checkout, however this will not destroy the unfinished rebase, failing our build script. Destroy the unfinished rebase state. Suggested-by:
David Heidelberg <david.heidelberg@collabora.com> Signed-off-by:
Helen Koike <helen.koike@collabora.com> Patchwork: https://patchwork.freedesktop.org/patch/570159/Signed-off-by:
-
Rob Clark authored
Replace the ww_mutex locking dance with the drm_exec helper. v2: Error path fixes, move drm_exec_fini so we only call it once (and only if we have drm_exec_init() Signed-off-by: -
Rob Clark authored
In cases where the # is known ahead of time, it is silly to do the table resize dance. Signed-off-by:
Christian König <christian.koenig@amd.com> Patchwork: https://patchwork.freedesktop.org/patch/568338/
-
Rob Clark authored
Now that it only handles unlock duty, drop the superfluous arg and rename it. Signed-off-by:
-
Rob Clark authored
Untangle unpinning from unlock/unref loop. The unpin only happens in error paths so it is easier to decouple from the normal unlock path. Since we never have an intermediate state where a subset of buffers are pinned (ie. we never bail out of the pin or unpin loops) we can replace the bo state flag bit with a global flag in the submit. Signed-off-by:
-
Rob Clark authored
We shouldn't be running the job in error cases. This also avoids having to think too hard about where the objs get unpinned (and if necessary, the resv takes over tracking that the obj is busy).. ie. error cases it always happens synchronously, and normal cases it happens from scheduler job_run() callback. Signed-off-by:
-
Rob Clark authored
The only point it is called is before pinning objects, so the "unpin" part of the name is fiction. Just remove it and call submit_cleanup_bo() directly. Signed-off-by:
-
Rob Clark authored
This was a small optimization for pre-soft-pin userspace. But mesa switched to soft-pin nearly 5yrs ago. So lets drop the optimization and simplify the code. Signed-off-by:
-
Bjorn Andersson authored
The only A680 referenced from DeviceTree is patch level 1, which since commit '90b593ce ("drm/msm/adreno: Switch to chip-id for identifying GPU")' isn't a known chip id. Correct the chip id to allow the A680 to be recognized again. Fixes: 90b593ce ("drm/msm/adreno: Switch to chip-id for identifying GPU") Signed-off-by:
-
