Should be set only if the ingress packets present it, otherwise
we can confuse csum validation.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The TCP_WINDOW_CLAMP socket option is defined in tcp(7) to "Bound the size
of the advertised window to this value."  Window clamping is distributed
across two variables, window_clamp ("Maximal window to advertise" in
tcp.h) and rcv_ssthresh ("Current window clamp").

This patch updates the function where the window clamp is set to also
reduce the current window clamp, rcv_sshthresh, if needed.  With this,
setting the TCP_WINDOW_CLAMP option has the documented effect of limiting
the window.
Signed-off-by: Neil Spring <ntspring@fb.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20210825210117.1668371-1-ntspring@fb.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

drivers/net/wwan/mhi_wwan_mbim.c - drop the extra arg.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull nfsd fix from Bruce Fields:
 "This is a one-liner fix for a serious bug that can cause the server to
  become unresponsive to a client, so I think it's worth the last-minute
  inclusion for 5.14"

* tag 'nfsd-5.14-1' of git://linux-nfs.org/~bfields/linux:
  SUNRPC: Fix XPT_BUSY flag leakage in svc_handle_xprt()...

Pull networking fixes from Jakub Kicinski:
 "Networking fixes, including fixes from can and bpf.

  Closing three hw-dependent regressions. Any fixes of note are in the
  'old code' category. Nothing blocking release from our perspective.

  Current release - regressions:

   - stmmac: revert "stmmac: align RX buffers"

   - usb: asix: ax88772: move embedded PHY detection as early as
     possible

   - usb: asix: do not call phy_disconnect() for ax88178

   - Revert "net: really fix the build...", from Kalle to fix QCA6390

  Current release - new code bugs:

   - phy: mediatek: add the missing suspend/resume callbacks

  Previous releases - regressions:

   - qrtr: fix another OOB Read in qrtr_endpoint_post

   - stmmac: dwmac-rk: fix unbalanced pm_runtime_enable warnings

  Previous releases - always broken:

   - inet: use siphash in exception handling

   - ip_gre: add validation for csum_start

   - bpf: fix ringbuf helper function compatibility

   - rtnetlink: return correct error on changing device netns

   - e1000e: do not try to recover the NVM checksum on Tiger Lake"

* tag 'net-5.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (43 commits)
  Revert "net: really fix the build..."
  net: hns3: fix get wrong pfc_en when query PFC configuration
  net: hns3: fix GRO configuration error after reset
  net: hns3: change the method of getting cmd index in debugfs
  net: hns3: fix duplicate node in VLAN list
  net: hns3: fix speed unknown issue in bond 4
  net: hns3: add waiting time before cmdq memory is released
  net: hns3: clear hardware resource when loading driver
  net: fix NULL pointer reference in cipso_v4_doi_free
  rtnetlink: Return correct error on changing device netns
  net: dsa: hellcreek: Adjust schedule look ahead window
  net: dsa: hellcreek: Fix incorrect setting of GCL
  cxgb4: dont touch blocked freelist bitmap after free
  ipv4: use siphash instead of Jenkins in fnhe_hashfun()
  ipv6: use siphash in rt6_exception_hash()
  can: usb: esd_usb2: esd_usb2_rx_event(): fix the interchange of the CAN RX and TX error counters
  net: usb: asix: ax88772: fix boolconv.cocci warnings
  net/sched: ets: fix crash when flipping from 'strict' to 'quantum'
  qede: Fix memset corruption
  net: stmmac: fix kernel panic due to NULL pointer dereference of buf->xdp
  ...

Pull arm64 fix from Will Deacon:
 "We received a report this week that the generic version of
  pfn_valid(), which we switched to this merge window in 16c9afc7
  ("arm64/mm: drop HAVE_ARCH_PFN_VALID"), interacts badly with
  dma_map_resource() due to the following check:

        /* Don't allow RAM to be mapped */
        if (WARN_ON_ONCE(pfn_valid(PHYS_PFN(phys_addr))))
                return DMA_MAPPING_ERROR;

  Since the ongoing saga to determine the semantics of pfn_valid() is
  unlikely to be resolved this week (does it indicate valid memory, or
  just the presence of a struct page, or whether that struct page has
  been initialised?), just revert back to our old version of pfn_valid()
  for 5.14.

  Summary:

   - Fix dma_map_resource() by reverting back to old pfn_valid() code"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  Partially revert "arm64/mm: drop HAVE_ARCH_PFN_VALID"

Pull ceph fixes from Ilya Dryomov:
 "Two memory management fixes for the filesystem"

* tag 'ceph-for-5.14-rc8' of git://github.com/ceph/ceph-client:
  ceph: fix possible null-pointer dereference in ceph_mdsmap_decode()
  ceph: correctly handle releasing an embedded cap flush

This reverts commit ce78ffa3.

Wren and Nicolas reported that ath11k was failing to initialise QCA6390
Wi-Fi 6 device with error:

qcom_mhi_qrtr: probe of mhi0_IPCR failed with error -22

Commit ce78ffa3 ("net: really fix the build..."), introduced in
v5.14-rc5, caused this regression in qrtr. Most likely all ath11k
devices are broken, but I only tested QCA6390. Let's revert the broken
commit so that ath11k works again.
Reported-by: Wren Turkal <wt@penguintechs.org>
Reported-by: Nicolas Schichan <nschichan@freebox.fr>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210826172816.24478-1-kvalo@codeaurora.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull btrfs fix from David Sterba:
 "One more fix that I think qualifies for a late merge. It's a revert of
  a one-liner fix that meanwhile got backported to stable kernels and we
  got reports from users.

  The broken fix prevents creating compressed inline extents, which
  could be noticeable on space consumption.

  Technically it's a regression as the patch was merged in 5.14-rc1 but
  got propagated to several stable kernels and has higher exposure than
  a 'typical' development cycle bug"

* tag 'for-5.14-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  Revert "btrfs: compression: don't try to compress if we don't have enough pages"

Alexei Starovoitov says:

====================
bpf 2021-08-26

We've added 1 non-merge commit during the last 1 day(s):

1) Fix ringbuf helper function compatibility, from Daniel.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  bpf: Fix ringbuf helper function compatibility
====================

Link: https://lore.kernel.org/r/20210826153720.19083-1-alexei.starovoitov@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Guangbin Huang says:

====================
net: hns3: add some fixes for -net

This series adds some fixes for the HNS3 ethernet driver.
====================

Link: https://lore.kernel.org/r/1629976921-43438-1-git-send-email-huangguangbin2@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Currently, when query PFC configuration by dcbtool, driver will return
PFC enable status based on TC. As all priorities are mapped to TC0 by
default, if TC0 is enabled, then all priorities mapped to TC0 will be
shown as enabled status when query PFC setting, even though some
priorities have never been set.

for example:
$ dcb pfc show dev eth0
pfc-cap 4 macsec-bypass off delay 0
prio-pfc 0:off 1:off 2:off 3:off 4:off 5:off 6:off 7:off
$ dcb pfc set dev eth0 prio-pfc 0:on 1:on 2:on 3:on
$ dcb pfc show dev eth0
pfc-cap 4 macsec-bypass off delay 0
prio-pfc 0:on 1:on 2:on 3:on 4:on 5:on 6:on 7:on

To fix this problem, just returns user's PFC config parameter saved in
driver.

Fixes: cacde272 ("net: hns3: Add hclge_dcb module for the support of DCB feature")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The GRO configuration is enabled by default after reset. This
is incorrect and should be restored to the user-configured value.
So this restoration is added during reset initialization.
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Currently, the cmd index is obtained in debugfs by comparing file names.
However, this method may cause errors when processing more complex file
names. So, change this method by saving cmd in private data and comparing
it when getting cmd index in debugfs for optimization.

Fixes: 5e69ea7e ("net: hns3: refactor the debugfs process")
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

VLAN list should not be added duplicate VLAN node, otherwise it would
cause "add failed" when restore VLAN from VLAN list, so this patch adds
VLAN ID check before adding node into VLAN list.

Fixes: c6075b19 ("net: hns3: Record VF vlan tables")
Signed-off-by: Guojia Liao <liaoguojia@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

In bond 4, when the link goes down and up repeatedly, the bond may get an
unknown speed, and then this port can not work.

The driver notify netif_carrier_on() before update the link state, when the
bond receive carrier on, will query the speed of the port, if the query
operation happens before updating the link state, will get an unknown
speed. So need to notify netif_carrier_on() after update the link state.

Fixes: 46a3df9f ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Fixes: e2cb1dec ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

After the cmdq registers are cleared, the firmware may take time to
clear out possible left over commands in the cmdq. Driver must release
cmdq memory only after firmware has completed processing of left over
commands.

Fixes: 232d0d55 ("net: hns3: uninitialize command queue while unloading PF driver")
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

If a PF is bonded to a virtual machine and the virtual machine exits
unexpectedly, some hardware resource cannot be cleared. In this case,
loading driver may cause exceptions. Therefore, the hardware resource
needs to be cleared when the driver is loaded.

Fixes: 46a3df9f ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

In netlbl_cipsov4_add_std() when 'doi_def->map.std' alloc
failed, we sometime observe panic:

  BUG: kernel NULL pointer dereference, address:
  ...
  RIP: 0010:cipso_v4_doi_free+0x3a/0x80
  ...
  Call Trace:
   netlbl_cipsov4_add_std+0xf4/0x8c0
   netlbl_cipsov4_add+0x13f/0x1b0
   genl_family_rcv_msg_doit.isra.15+0x132/0x170
   genl_rcv_msg+0x125/0x240

This is because in cipso_v4_doi_free() there is no check
on 'doi_def->map.std' when 'doi_def->type' equal 1, which
is possibe, since netlbl_cipsov4_add_std() haven't initialize
it before alloc 'doi_def->map.std'.

This patch just add the check to prevent panic happen for similar
cases.
Reported-by: Abaci <abaci@linux.alibaba.com>
Signed-off-by: Michael Wang <yun.wang@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Joel Stanley says:

====================
net: Add LiteETH network driver

This adds a driver for the LiteX network device, LiteEth.

v4 Fixes the bindings and adds r-b tags from Gabriel and Rob.

v3 Updates the bindings to describe the slots in a way that makes more
sense for the hardware, instead of trying to fit some existing
properties. The driver is updated to use these bindings, and fix some
issues pointed out by Gabriel.

v2 Addresses feedback from Jakub, with detailed changes in each patch.

It also moves to the litex register accessors so the system works on big
endian litex platforms. I tested with mor1k on an Arty A7-100T.

I have removed the mdio aspects of the driver as they are not needed for
basic operation. I will continue to work on adding support in the
future, but I don't think it needs to block the mac driver going in.

The binding describes the mdio registers, and has been fixed to not show
any warnings against dtschema master.

LiteEth is a simple driver for the FPGA based Ethernet device used in various
RISC-V, PowerPC's microwatt, OpenRISC's mor1k and other FPGA based
systems on chip.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

LiteX is a soft system-on-chip that targets FPGAs. LiteETH is a basic
network device that is commonly used in LiteX designs.

The driver was first written in 2017 and has been maintained by the
LiteX community in various trees. Thank you to all who have contributed.
Co-developed-by: Gabriel Somlo <gsomlo@gmail.com>
Co-developed-by: David Shah <dave@ds0.me>
Co-developed-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Tested-by: Gabriel Somlo <gsomlo@gmail.com>
Reviewed-by: Gabriel Somlo <gsomlo@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

LiteETH is a small footprint and configurable Ethernet core for FPGA
based system on chips.

The hardware is parametrised by the size and number of the slots in it's
receive and send buffers. These are described as properties, with the
commonly used values set as the default.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently when device is moved between network namespaces using
RTM_NEWLINK message type and one of netns attributes (FLA_NET_NS_PID,
IFLA_NET_NS_FD, IFLA_TARGET_NETNSID) but w/o specifying IFLA_IFNAME, and
target namespace already has device with same name, userspace will get
EINVAL what is confusing and makes debugging harder.

Fix it so that userspace gets more appropriate EEXIST instead what makes
debugging much easier.

Before:

  # ./ifname.sh
  + ip netns add ns0
  + ip netns exec ns0 ip link add l0 type dummy
  + ip netns exec ns0 ip link show l0
  8: l0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
      link/ether 66:90:b5:d5:78:69 brd ff:ff:ff:ff:ff:ff
  + ip link add l0 type dummy
  + ip link show l0
  10: l0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
      link/ether 6e:c6:1f:15:20:8d brd ff:ff:ff:ff:ff:ff
  + ip link set l0 netns ns0
  RTNETLINK answers: Invalid argument

After:

  # ./ifname.sh
  + ip netns add ns0
  + ip netns exec ns0 ip link add l0 type dummy
  + ip netns exec ns0 ip link show l0
  8: l0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
      link/ether 1e:4a:72:e3:e3:8f brd ff:ff:ff:ff:ff:ff
  + ip link add l0 type dummy
  + ip link show l0
  10: l0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
      link/ether f2:fc:fe:2b:7d:a6 brd ff:ff:ff:ff:ff:ff
  + ip link set l0 netns ns0
  RTNETLINK answers: File exists

The problem is that do_setlink() passes its `char *ifname` argument,
that it gets from a caller, to __dev_change_net_namespace() as is (as
`const char *pat`), but semantics of ifname and pat can be different.

For example, __rtnl_newlink() does this:

net/core/rtnetlink.c
    3270	char ifname[IFNAMSIZ];
     ...
    3286	if (tb[IFLA_IFNAME])
    3287		nla_strscpy(ifname, tb[IFLA_IFNAME], IFNAMSIZ);
    3288	else
    3289		ifname[0] = '\0';
     ...
    3364	if (dev) {
     ...
    3394		return do_setlink(skb, dev, ifm, extack, tb, ifname, status);
    3395	}

, i.e. do_setlink() gets ifname pointer that is always valid no matter
if user specified IFLA_IFNAME or not and then do_setlink() passes this
ifname pointer as is to __dev_change_net_namespace() as pat argument.

But the pat (pattern) in __dev_change_net_namespace() is used as:

net/core/dev.c
   11198	err = -EEXIST;
   11199	if (__dev_get_by_name(net, dev->name)) {
   11200		/* We get here if we can't use the current device name */
   11201		if (!pat)
   11202			goto out;
   11203		err = dev_get_valid_name(net, dev, pat);
   11204		if (err < 0)
   11205			goto out;
   11206	}

As the result the `goto out` path on line 11202 is neven taken and
instead of returning EEXIST defined on line 11198,
__dev_change_net_namespace() returns an error from dev_get_valid_name()
and this, in turn, will be EINVAL for ifname[0] = '\0' set earlier.

Fixes: d8a5ec67 ("[NET]: netlink support for moving devices between network namespaces.")
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove the 'imply' statements, these apparently are not doing
what I expected.  Platform modules which are used by the driver
still need to be enabled in the overall config for them to be
used, but there isn't a hard dependency on them.

Use 'depend' for selectable modules which provide functions
used directly by the driver.
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This adds a function for what has been magic register writes so far.
It's based on recent changes to vendor drivers r8101, r8168, r8125,
and deals with events that trigger an early ASPM L1 exit.
Description of the bits has been kindly provided by Realtek.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This change extends the existing GRO coalesce test to
allow running on top of a veth pair, so that no H/W dep
is required to run them.

By default gro.sh will use the veth backend, and will try
to use exiting H/W in loopback mode if a specific device
name is provided with the '-i' command line option.

No functional change is intended for the loopback-based
tests, just move all the relevant initialization/cleanup
code into the related script.

Introduces a new initialization helper script for the
veth backend, and plugs the correct helper script according
to the provided command line.

Additionally, enable veth-based tests by default.

v1 -> v2:
  - drop unused code in setup_veth_ns() - Willem
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'mac80211-next-for-net-next-2021-08-26' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next

Johannes Berg says:

====================
A few more things:
 * Use correct DFS domain for self-managed devices
 * some preparations for transmit power element handling
   and other 6 GHz regulatory handling
 * TWT support in AP mode in mac80211
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Both SKB_FRAG_PAGE_ORDER are defined to the same value in
net/core/sock.c and drivers/vhost/net.c.

Move the SKB_FRAG_PAGE_ORDER definition to net/core/sock.h,
as both net/core/sock.c and drivers/vhost/net.c include it,
and it seems a reasonable file to put the macro.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If otx2_mbox_get_rsp() fails, otx2_set_flowkey_cfg() need return an
error code.

Fixes: e7938365 ("octeontx2-pf: Fix algorithm index in MCAM rules with RSS action")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Kurt Kanzenbach says:

====================
net: dsa: hellcreek: 802.1Qbv Fixes

while using TAPRIO offloading on the Hirschmann hellcreek switch, I've noticed
two issues in the current implementation:

1. The gate control list is incorrectly programmed
2. The admin base time is not set properly

Fix it.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Traffic schedules can only be started up to eight seconds within the
future. Therefore, the driver periodically checks every two seconds whether the
admin base time provided by the user is inside that window. If so the schedule
is started. Otherwise the check is deferred.

However, according to the programming manual the look ahead window size should
be four - not eight - seconds. By using the proposed value of four seconds
starting a schedule at a specified admin base time actually works as expected.

Fixes: 24dfc6eb ("net: dsa: hellcreek: Add TAPRIO offloading support")
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently the gate control list which is programmed into the hardware is
incorrect resulting in wrong traffic schedules. The problem is the loop
variables are incremented before they are referenced. Therefore, move the
increment to the end of the loop.

Fixes: 24dfc6eb ("net: dsa: hellcreek: Add TAPRIO offloading support")
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When adapter init fails, the blocked freelist bitmap is already freed
up and should not be touched. So, move the bitmap zeroing closer to
where it was successfully allocated. Also handle adapter init failure
unwind path immediately and avoid setting up RDMA memory windows.

Fixes: 5b377d11 ("cxgb4: Add debugfs facility to inject FL starvation")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Eric Dumazet says:

====================
inet: use siphash in exception handling

A group of security researchers brought to our attention
the weakness of hash functions used in rt6_exception_hash()
and fnhe_hashfun()

I made two distinct patches to help backports, since IPv6
part was added in 4.15
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

A group of security researchers brought to our attention
the weakness of hash function used in fnhe_hashfun().

Lets use siphash instead of Jenkins Hash, to considerably
reduce security risks.

Also remove the inline keyword, this really is distracting.

Fixes: d546c621 ("ipv4: harden fnhe_hashfun()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Keyu Man <kman001@ucr.edu>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>

A group of security researchers brought to our attention
the weakness of hash function used in rt6_exception_hash()

Lets use siphash instead of Jenkins Hash, to considerably
reduce security risks.

Following patch deals with IPv4.

Fixes: 35732d01 ("ipv6: introduce a hash table to store dst cache")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Keyu Man <kman001@ucr.edu>
Cc: Wei Wang <weiwan@google.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Acked-by: Wei Wang <weiwan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently during CAC start or other radar events, the DFS
domain is fetched from cfg based on global DFS domain,
even if the wiphy regdomain disagrees.

But this could be different in case of self managed wiphy's
in case the self managed driver updates its database or supports
regions which has DFS domain set to UNSET in cfg80211 local
regdomain.

So for explicitly self-managed wiphys, just use their DFS
domain.
Signed-off-by: Sriram R <srirrama@codeaurora.org>
Link: https://lore.kernel.org/r/1629934730-16388-1-git-send-email-srirrama@codeaurora.orgSigned-off-by: Johannes Berg <johannes.berg@intel.com>

Shannon Nelson says:

====================
ionic: queue and filter mgmt updates

After a pair of simple code cleanups, we change the mac filter
management to split the updates between the driver's filter
list and the device's filter list so that we can keep the calls
to dev_uc_sync() and dev_mc_sync() under the netif_addr_lock
in ndo_set_rx_mode, and then sync the driver's list to the
device later in the rx_mode work task.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Make sure we go into PROMISC mode when we have too many
filters by specifically counting the filters that successfully
get saved to the firmware.

The device advertises max_ucast_filters and max_mcast_filters,
but really only has max_ucast_filters slots available for
uc and mc filters combined.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

The filter counting in ionic_lif_addr() really isn't useful,
and potentially misleading, especially when we're checking in
ionic_lif_rx_mode() to see if we need to go into PROMISC mode.
We can safely refactor this and remove a calling layer.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>