- 26 Jun, 2024 1 commit
-
-
Geert Uytterhoeven authored
Move ravb_gen2_hw_info before ravb_gen3_hw_info to match ravb_match_table[] order. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by:
Sergey Shtylyov <s.shtylyov@omp.ru> Link: https://patch.msgid.link/a76febe3737e26365a784e9193da9363f22aa550.1719234830.git.geert+renesas@glider.beSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
- 25 Jun, 2024 21 commits
-
-
Li RongQing authored
This place is fetching the stats, u64_stats_update_begin()/end() should not be used, and the fetcher of stats is in the same context as the updater of the stats, so don't need any protection Suggested-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Li RongQing <lirongqing@baidu.com> Link: https://lore.kernel.org/20240621094552.53469-1-lirongqing@baidu.comSigned-off-by:
-
Yujie Liu authored
It seems that there is no definition for config IP_GRE, and it is not a dependency of other configs, so remove it. linux$ find -name Kconfig | xargs grep "IP_GRE" <-- nothing There is a IPV6_GRE config defined in net/ipv6/Kconfig. It only depends on NET_IPGRE_DEMUX but not IP_GRE. Signed-off-by:
Yujie Liu <yujie.liu@intel.com> Acked-by:
-
James Chapman authored
This fixes a sparse warning. Fixes: d18d3f0a ("l2tp: replace hlist with simple list for per-tunnel session list") Reported-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202406220754.evK8Hrjw-lkp@intel.com/Signed-off-by:
James Chapman <jchapman@katalix.com> Link: https://patch.msgid.link/20240624082945.1925009-1-jchapman@katalix.comSigned-off-by:
-
Elad Yifee authored
Introduce an additional validation to ensure that the PPE index is modified exclusively for mtk_eth ingress devices. This primarily addresses the issue related to WED operation with multiple PPEs. Fixes: dee4dd10 ("net: ethernet: mtk_eth_soc: ppe: add support for multiple PPEs") Signed-off-by:
Elad Yifee <eladwf@gmail.com> Link: https://lore.kernel.org/r/20240623175113.24437-1-eladwf@gmail.comSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Paolo Abeni authored
Vineeth Karumanchi says: ==================== net: macb: WOL enhancements - Add provisioning for queue tie-off and queue disable during suspend. - Add support for ARP packet types to WoL. - Advertise WoL attributes by default. - Extend MACB supported WoL modes to the PHY supported WoL modes. - Deprecate magic-packet property. v6: https://lore.kernel.org/netdev/20240617070413.2291511-1-vineeth.karumanchi@amd.com/ v5: https://lore.kernel.org/netdev/20240611162827.887162-1-vineeth.karumanchi@amd.com/ v4: https://lore.kernel.org/lkml/20240610053936.622237-1-vineeth.karumanchi@amd.com/ v3: https://lore.kernel.org/netdev/20240605102457.4050539-1-vineeth.karumanchi@amd.com/ v2: https://lore.kernel.org/netdev/20240222153848.2374782-1-vineeth.karumanchi@amd.com/ v1: https://lore.kernel.org/lkml/20240130104845.3995341-1-vineeth.karumanchi@amd.com/#t ==================== Link: https://lore.kernel.org/r/20240621045735.3031357-1-vineeth.karumanchi@amd.comSigned-off-by:
-
Vineeth Karumanchi authored
WOL modes such as magic-packet should be an OS policy. By default, advertise supported modes and use ethtool to activate the required mode. Suggested-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Vineeth Karumanchi <vineeth.karumanchi@amd.com> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Vineeth Karumanchi authored
Extend wake-on LAN support with an ARP packet. Currently, if PHY supports WOL, ethtool ignores the modes supported by MACB. This change extends the WOL modes with MACB supported modes. Advertise wake-on LAN supported modes by default without relying on dt node. By default, wake-on LAN will be in disabled state. Using ethtool, users can enable/disable or choose packet types. For wake-on LAN via ARP, ensure the IP address is assigned and report an error otherwise. Co-developed-by:
Harini Katakam <harini.katakam@amd.com> Signed-off-by:
Claudiu Beznea <claudiu.beznea@tuxon.dev> Tested-by: Claudiu Beznea <claudiu.beznea@tuxon.dev> # on SAMA7G5 Signed-off-by:
-
Vineeth Karumanchi authored
Enable queue disable for Versal devices. Signed-off-by:
-
Vineeth Karumanchi authored
When GEM is used as a wake device, it is not mandatory for the RX DMA to be active. The RX engine in IP only needs to receive and identify a wake packet through an interrupt. The wake packet is of no further significance; hence, it is not required to be copied into memory. By disabling RX DMA during suspend, we can avoid unnecessary DMA processing of any incoming traffic. During suspend, perform either of the below operations: - tie-off/dummy descriptor: Disable unused queues by connecting them to a looped descriptor chain without free slots. - queue disable: The newer IP version allows disabling individual queues. Co-developed-by:
-
Paolo Abeni authored
Kuniyuki Iwashima says: ==================== af_unix: Remove spin_lock_nested() and convert to lock_cmp_fn. This series removes spin_lock_nested() in AF_UNIX and instead defines the locking orders as functions tied to each lock by lockdep_set_lock_cmp_fn(). When the defined function returns a negative value, lockdep considers it will not cause deadlock. (See ->cmp_fn() in check_deadlock() and check_prev_add().) When we cannot define the total ordering, we return -1 for the allowed ordering and otherwise 0 as undefined. [0] [0]: https://lore.kernel.org/netdev/thzkgbuwuo3knevpipu4rzsh5qgmwhklihypdgziiruabvh46f@uwdkpcfxgloo/ Changes: v4: * Patch 4 * Make unix_state_lock_cmp_fn() symmetric. v3: https://lore.kernel.org/netdev/20240614200715.93150-1-kuniyu@amazon.com/ * Patch 3 * Cache sk->sk_state * s/unix_state_lock()/unix_state_unlock()/ * Patch 8 * Add embryo -> listener locking order v2: https://lore.kernel.org/netdev/20240611222905.34695-1-kuniyu@amazon.com/ * Patch 1 & 2 * Use (((l) > (r)) - ((l) < (r))) for comparison v1: https://lore.kernel.org/netdev/20240610223501.73191-1-kuniyu@amazon.com/ ==================== Link: https://lore.kernel.org/r/20240620205623.60139-1-kuniyu@amazon.comSigned-off-by:
-
Kuniyuki Iwashima authored
When (AF_UNIX, SOCK_STREAM) socket connect()s to a listening socket, the listener's sk_peer_pid/sk_peer_cred are copied to the client in copy_peercred(). Then, two sk_peer_locks are held there; one is client's and another is listener's. However, the latter is not needed because we hold the listner's unix_state_lock() there and unix_listen() cannot update the cred concurrently. Let's drop the unnecessary spin_lock() and use the bare spin_lock() for the client to protect concurrent read by getsockopt(SO_PEERCRED). Signed-off-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by:
-
Kuniyuki Iwashima authored
When (AF_UNIX, SOCK_STREAM) socket connect()s to a listening socket, the listener's sk_peer_pid/sk_peer_cred are copied to the client in copy_peercred(). Then, the client's sk_peer_pid and sk_peer_cred are always NULL, so we need not call put_pid() and put_cred() there. Signed-off-by:
-
Kuniyuki Iwashima authored
init_peercred() is called in 3 places: 1. socketpair() : both sockets 2. connect() : child socket 3. listen() : listening socket The first two need not hold sk_peer_lock because no one can touch the socket. Let's set cred/pid without holding lock for the two cases and rename the old init_peercred() to update_peercred() to properly reflect the use case. Signed-off-by:
-
Kuniyuki Iwashima authored
While GC is cleaning up cyclic references by SCM_RIGHTS, unix_collect_skb() collects skb in the socket's recvq. If the socket is TCP_LISTEN, we need to collect skb in the embryo's queue. Then, both the listener's recvq lock and the embroy's one are held. The locking is always done in the listener -> embryo order. Let's define it as unix_recvq_lock_cmp_fn() instead of using spin_lock_nested(). Note that the reverse order is defined for consistency. Signed-off-by:
-
Kuniyuki Iwashima authored
Commit 1971d13f ("af_unix: Suppress false-positive lockdep splat for spin_lock() in __unix_gc().") added U_LOCK_GC_LISTENER for the old GC, but it's no longer needed for the new GC. Let's remove U_LOCK_GC_LISTENER and unix_state_lock_nested() as there's no user. Signed-off-by:
-
Kuniyuki Iwashima authored
sk_diag_dump_icons() acquires embryo's lock by unix_state_lock_nested() to fetch its peer. The embryo's ->peer is set to NULL only when its parent listener is close()d. Then, unix_release_sock() is called for each embryo after unlinking skb by skb_dequeue(). In sk_diag_dump_icons(), we hold the parent's recvq lock, so we need not acquire unix_state_lock_nested(), and peer is always non-NULL. Let's remove unnecessary unix_state_lock_nested() and non-NULL test for peer. Signed-off-by:
-
Kuniyuki Iwashima authored
sk_diag_dump_peer() and sk_diag_dump() call unix_state_lock() for sock_i_ino() which reads SOCK_INODE(sk->sk_socket)->i_ino, but it's protected by sk->sk_callback_lock. Let's remove unnecessary unix_state_lock(). Signed-off-by:
-
Kuniyuki Iwashima authored
While a SOCK_(STREAM|SEQPACKET) socket connect()s to another, we hold two locks of them by unix_state_lock() and unix_state_lock_nested() in unix_stream_connect(). Before unix_state_lock_nested(), the following is guaranteed by checking sk->sk_state: 1. The first socket is TCP_LISTEN 2. The second socket is not the first one 3. Simultaneous connect() must fail So, the client state can be TCP_CLOSE or TCP_LISTEN or TCP_ESTABLISHED. Let's define the expected states as unix_state_lock_cmp_fn() instead of using unix_state_lock_nested(). Note that 2. is detected by debug_spin_lock_before() and 3. cannot be expressed as lock_cmp_fn. Signed-off-by:
-
Kuniyuki Iwashima authored
When a SOCK_(STREAM|SEQPACKET) socket connect()s to another one, we need to lock the two sockets to check their states in unix_stream_connect(). We use unix_state_lock() for the server and unix_state_lock_nested() for client with tricky sk->sk_state check to avoid deadlock. The possible deadlock scenario are the following: 1) Self connect() 2) Simultaneous connect() The former is simple, attempt to grab the same lock, and the latter is AB-BA deadlock. After the server's unix_state_lock(), we check the server socket's state, and if it's not TCP_LISTEN, connect() fails with -EINVAL. Then, we avoid the former deadlock by checking the client's state before unix_state_lock_nested(). If its state is not TCP_LISTEN, we can make sure that the client and the server are not identical based on the state. Also, the latter deadlock can be avoided in the same way. Due to the server sk->sk_state requirement, AB-BA deadlock could happen only with TCP_LISTEN sockets. So, if the client's state is TCP_LISTEN, we can give up the second lock to avoid the deadlock. CPU 1 CPU 2 CPU 3 connect(A -> B) connect(B -> A) listen(A) --- --- --- unix_state_lock(B) B->sk_state == TCP_LISTEN READ_ONCE(A->sk_state) == TCP_CLOSE ^^^^^^^^^ ok, will lock A unix_state_lock(A) .--------------' WRITE_ONCE(A->sk_state, TCP_LISTEN) | unix_state_unlock(A) | | unix_state_lock(A) | A->sk_sk_state == TCP_LISTEN | READ_ONCE(B->sk_state) == TCP_LISTEN v ^^^^^^^^^^ unix_state_lock_nested(A) Don't lock B !! Currently, while checking the client's state, we also check if it's TCP_ESTABLISHED, but this is unlikely and can be checked after we know the state is not TCP_CLOSE. Moreover, if it happens after the second lock, we now jump to the restart label, but it's unlikely that the server is not found during the retry, so the jump is mostly to revist the client state check. Let's remove the retry logic and check the state against TCP_CLOSE first. Signed-off-by: -
Kuniyuki Iwashima authored
unix_dgram_connect() and unix_dgram_{send,recv}msg() lock the socket and peer in ascending order of the socket address. Let's define the order as unix_state_lock_cmp_fn() instead of using unix_state_lock_nested(). Signed-off-by:Kent Overstreet <kent.overstreet@linux.dev> Signed-off-by:
-
Kuniyuki Iwashima authored
When created, AF_UNIX socket is put into net->unx.table.buckets[], and the hash is stored in sk->sk_hash. * unbound socket : 0 <= sk_hash <= UNIX_HASH_MOD When bind() is called, the socket could be moved to another bucket. * pathname socket : 0 <= sk_hash <= UNIX_HASH_MOD * abstract socket : UNIX_HASH_MOD + 1 <= sk_hash <= UNIX_HASH_MOD * 2 + 1 Then, we call unix_table_double_lock() which locks a single bucket or two. Let's define the order as unix_table_lock_cmp_fn() instead of using spin_lock_nested(). The locking is always done in ascending order of sk->sk_hash, which is the index of buckets/locks array allocated by kvmalloc_array(). sk_hash_A < sk_hash_B <=> &locks[sk_hash_A].dep_map < &locks[sk_hash_B].dep_map So, the relation of two sk->sk_hash can be derived from the addresses of dep_map in the array of locks. Signed-off-by:
-
- 24 Jun, 2024 17 commits
-
-
Jakub Kicinski authored
Sebastian Andrzej Siewior says: ==================== locking: Introduce nested-BH locking. Disabling bottoms halves acts as per-CPU BKL. On PREEMPT_RT code within local_bh_disable() section remains preemtible. As a result high prior tasks (or threaded interrupts) will be blocked by lower-prio task (or threaded interrupts) which are long running which includes softirq sections. The proposed way out is to introduce explicit per-CPU locks for resources which are protected by local_bh_disable() and use those only on PREEMPT_RT so there is no additional overhead for !PREEMPT_RT builds. The series introduces the infrastructure and converts large parts of networking which is largest stake holder here. Once this done the per-CPU lock from local_bh_disable() on PREEMPT_RT can be lifted. Performance testing. Baseline is net-next as of commit 93bda330 ("Merge branch'net-constify-ctl_table-arguments-of-utility-functions'") plus v6.10-rc1. A 10GiG link is used between two hosts. The command xdp-bench redirect-cpu --cpu 3 --remote-action drop eth1 -e was invoked on the receiving side with a ixgbe. The sending side uses pktgen_sample03_burst_single_flow.sh on i40e. Baseline: | eth1->? 9,018,604 rx/s 0 err,drop/s | receive total 9,018,604 pkt/s 0 drop/s 0 error/s | cpu:7 9,018,604 pkt/s 0 drop/s 0 error/s | enqueue to cpu 3 9,018,602 pkt/s 0 drop/s 7.00 bulk-avg | cpu:7->3 9,018,602 pkt/s 0 drop/s 7.00 bulk-avg | kthread total 9,018,606 pkt/s 0 drop/s 214,698 sched | cpu:3 9,018,606 pkt/s 0 drop/s 214,698 sched | xdp_stats 0 pass/s 9,018,606 drop/s 0 redir/s | cpu:3 0 pass/s 9,018,606 drop/s 0 redir/s | redirect_err 0 error/s | xdp_exception 0 hit/s perf top --sort cpu,symbol --no-children: | 18.14% 007 [k] bpf_prog_4f0ffbb35139c187_cpumap_l4_hash | 13.29% 007 [k] ixgbe_poll | 12.66% 003 [k] cpu_map_kthread_run | 7.23% 003 [k] page_frag_free | 6.76% 007 [k] xdp_do_redirect | 3.76% 007 [k] cpu_map_redirect | 3.13% 007 [k] bq_flush_to_queue | 2.51% 003 [k] xdp_return_frame | 1.93% 007 [k] try_to_wake_up | 1.78% 007 [k] _raw_spin_lock | 1.74% 007 [k] cpu_map_enqueue | 1.56% 003 [k] bpf_prog_57cd311f2e27366b_cpumap_drop With this series applied: | eth1->? 10,329,340 rx/s 0 err,drop/s | receive total 10,329,340 pkt/s 0 drop/s 0 error/s | cpu:6 10,329,340 pkt/s 0 drop/s 0 error/s | enqueue to cpu 3 10,329,338 pkt/s 0 drop/s 8.00 bulk-avg | cpu:6->3 10,329,338 pkt/s 0 drop/s 8.00 bulk-avg | kthread total 10,329,321 pkt/s 0 drop/s 96,297 sched | cpu:3 10,329,321 pkt/s 0 drop/s 96,297 sched | xdp_stats 0 pass/s 10,329,321 drop/s 0 redir/s | cpu:3 0 pass/s 10,329,321 drop/s 0 redir/s | redirect_err 0 error/s | xdp_exception 0 hit/s perf top --sort cpu,symbol --no-children: | 20.90% 006 [k] bpf_prog_4f0ffbb35139c187_cpumap_l4_hash | 12.62% 006 [k] ixgbe_poll | 9.82% 003 [k] page_frag_free | 8.73% 003 [k] cpu_map_bpf_prog_run_xdp | 6.63% 006 [k] xdp_do_redirect | 4.94% 003 [k] cpu_map_kthread_run | 4.28% 006 [k] cpu_map_redirect | 4.03% 006 [k] bq_flush_to_queue | 3.01% 003 [k] xdp_return_frame | 1.95% 006 [k] _raw_spin_lock | 1.94% 003 [k] bpf_prog_57cd311f2e27366b_cpumap_drop This diff appears to be noise. v8: https://lore.kernel.org/all/20240619072253.504963-1-bigeasy@linutronix.de v7: https://lore.kernel.org/all/20240618072526.379909-1-bigeasy@linutronix.de v6: https://lore.kernel.org/all/20240612170303.3896084-1-bigeasy@linutronix.de v5: https://lore.kernel.org/all/20240607070427.1379327-1-bigeasy@linutronix.de v4: https://lore.kernel.org/all/20240604154425.878636-1-bigeasy@linutronix.de v3: https://lore.kernel.org/all/20240529162927.403425-1-bigeasy@linutronix.de v2: https://lore.kernel.org/all/20240503182957.1042122-1-bigeasy@linutronix.de v1: https://lore.kernel.org/all/20231215171020.687342-1-bigeasy@linutronix.de ==================== Link: https://patch.msgid.link/20240620132727.660738-1-bigeasy@linutronix.deSigned-off-by:
-
Sebastian Andrzej Siewior authored
The per-CPU flush lists, which are accessed from within the NAPI callback (xdp_do_flush() for instance), are per-CPU. There are subject to the same problem as struct bpf_redirect_info. Add the per-CPU lists cpu_map_flush_list, dev_map_flush_list and xskmap_map_flush_list to struct bpf_net_context. Add wrappers for the access. The lists initialized on first usage (similar to bpf_net_ctx_get_ri()). Cc: "Björn Töpel" <bjorn@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andrii Nakryiko <andrii@kernel.org> Cc: Eduard Zingerman <eddyz87@gmail.com> Cc: Hao Luo <haoluo@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Fastabend <john.fastabend@gmail.com> Cc: Jonathan Lemon <jonathan.lemon@gmail.com> Cc: KP Singh <kpsingh@kernel.org> Cc: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Cc: Magnus Karlsson <magnus.karlsson@intel.com> Cc: Martin KaFai Lau <martin.lau@linux.dev> Cc: Song Liu <song@kernel.org> Cc: Stanislav Fomichev <sdf@google.com> Cc: Yonghong Song <yonghong.song@linux.dev> Acked-by:
Jesper Dangaard Brouer <hawk@kernel.org> Reviewed-by:
Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Link: https://patch.msgid.link/20240620132727.660738-16-bigeasy@linutronix.deSigned-off-by:
-
Sebastian Andrzej Siewior authored
The XDP redirect process is two staged: - bpf_prog_run_xdp() is invoked to run a eBPF program which inspects the packet and makes decisions. While doing that, the per-CPU variable bpf_redirect_info is used. - Afterwards xdp_do_redirect() is invoked and accesses bpf_redirect_info and it may also access other per-CPU variables like xskmap_flush_list. At the very end of the NAPI callback, xdp_do_flush() is invoked which does not access bpf_redirect_info but will touch the individual per-CPU lists. The per-CPU variables are only used in the NAPI callback hence disabling bottom halves is the only protection mechanism. Users from preemptible context (like cpu_map_kthread_run()) explicitly disable bottom halves for protections reasons. Without locking in local_bh_disable() on PREEMPT_RT this data structure requires explicit locking. PREEMPT_RT has forced-threaded interrupts enabled and every NAPI-callback runs in a thread. If each thread has its own data structure then locking can be avoided. Create a struct bpf_net_context which contains struct bpf_redirect_info. Define the variable on stack, use bpf_net_ctx_set() to save a pointer to it, bpf_net_ctx_clear() removes it again. The bpf_net_ctx_set() may nest. For instance a function can be used from within NET_RX_SOFTIRQ/ net_rx_action which uses bpf_net_ctx_set() and NET_TX_SOFTIRQ which does not. Therefore only the first invocations updates the pointer. Use bpf_net_ctx_get_ri() as a wrapper to retrieve the current struct bpf_redirect_info. The returned data structure is zero initialized to ensure nothing is leaked from stack. This is done on first usage of the struct. bpf_net_ctx_set() sets bpf_redirect_info::kern_flags to 0 to note that initialisation is required. First invocation of bpf_net_ctx_get_ri() will memset() the data structure and update bpf_redirect_info::kern_flags. bpf_redirect_info::nh is excluded from memset because it is only used once BPF_F_NEIGH is set which also sets the nh member. The kern_flags is moved past nh to exclude it from memset. The pointer to bpf_net_context is saved task's task_struct. Using always the bpf_net_context approach has the advantage that there is almost zero differences between PREEMPT_RT and non-PREEMPT_RT builds. Cc: Andrii Nakryiko <andrii@kernel.org> Cc: Eduard Zingerman <eddyz87@gmail.com> Cc: Hao Luo <haoluo@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Fastabend <john.fastabend@gmail.com> Cc: KP Singh <kpsingh@kernel.org> Cc: Martin KaFai Lau <martin.lau@linux.dev> Cc: Song Liu <song@kernel.org> Cc: Stanislav Fomichev <sdf@google.com> Cc: Yonghong Song <yonghong.song@linux.dev> Acked-by:
Alexei Starovoitov <ast@kernel.org> Acked-by:
-
Sebastian Andrzej Siewior authored
bpf_scratchpad is a per-CPU variable and relies on disabled BH for its locking. Without per-CPU locking in local_bh_disable() on PREEMPT_RT this data structure requires explicit locking. Add a local_lock_t to the data structure and use local_lock_nested_bh() for locking. This change adds only lockdep coverage and does not alter the functional behaviour for !PREEMPT_RT. Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andrii Nakryiko <andrii@kernel.org> Cc: Hao Luo <haoluo@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Fastabend <john.fastabend@gmail.com> Cc: KP Singh <kpsingh@kernel.org> Cc: Martin KaFai Lau <martin.lau@linux.dev> Cc: Song Liu <song@kernel.org> Cc: Stanislav Fomichev <sdf@google.com> Cc: Yonghong Song <yonghong.song@linux.dev> Signed-off-by:
-
Sebastian Andrzej Siewior authored
The access to seg6_bpf_srh_states is protected by disabling preemption. Based on the code, the entry point is input_action_end_bpf() and every other function (the bpf helper functions bpf_lwt_seg6_*()), that is accessing seg6_bpf_srh_states, should be called from within input_action_end_bpf(). input_action_end_bpf() accesses seg6_bpf_srh_states first at the top of the function and then disables preemption. This looks wrong because if preemption needs to be disabled as part of the locking mechanism then the variable shouldn't be accessed beforehand. Looking at how it is used via test_lwt_seg6local.sh then input_action_end_bpf() is always invoked from softirq context. If this is always the case then the preempt_disable() statement is superfluous. If this is not always invoked from softirq then disabling only preemption is not sufficient. Replace the preempt_disable() statement with nested-BH locking. This is not an equivalent replacement as it assumes that the invocation of input_action_end_bpf() always occurs in softirq context and thus the preempt_disable() is superfluous. Add a local_lock_t the data structure and use local_lock_nested_bh() for locking. Add lockdep_assert_held() to ensure the lock is held while the per-CPU variable is referenced in the helper functions. Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andrii Nakryiko <andrii@kernel.org> Cc: David Ahern <dsahern@kernel.org> Cc: Hao Luo <haoluo@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Fastabend <john.fastabend@gmail.com> Cc: KP Singh <kpsingh@kernel.org> Cc: Martin KaFai Lau <martin.lau@linux.dev> Cc: Song Liu <song@kernel.org> Cc: Stanislav Fomichev <sdf@google.com> Cc: Yonghong Song <yonghong.song@linux.dev> Signed-off-by:
-
Sebastian Andrzej Siewior authored
There is no need to explicitly disable migration if bottom halves are also disabled. Disabling BH implies disabling migration. Remove migrate_disable() and rely solely on disabling BH to remain on the same CPU. Signed-off-by:
-
Sebastian Andrzej Siewior authored
softnet_data::process_queue is a per-CPU variable and relies on disabled BH for its locking. Without per-CPU locking in local_bh_disable() on PREEMPT_RT this data structure requires explicit locking. softnet_data::input_queue_head can be updated lockless. This is fine because this value is only update CPU local by the local backlog_napi thread. Add a local_lock_t to softnet_data and use local_lock_nested_bh() for locking of process_queue. This change adds only lockdep coverage and does not alter the functional behaviour for !PREEMPT_RT. Signed-off-by:
-
Sebastian Andrzej Siewior authored
The backlog_napi locking (previously RPS) relies on explicit locking if either RPS or backlog NAPI is enabled. If both are disabled then locking was achieved by disabling interrupts except on PREEMPT_RT. PREEMPT_RT was excluded because the needed synchronisation was already provided local_bh_disable(). Since the introduction of backlog NAPI and making it mandatory for PREEMPT_RT the ifdef within backlog_lock.*() is obsolete and can be removed. Remove the ifdefs in backlog_lock.*(). Signed-off-by:
-
Sebastian Andrzej Siewior authored
Softirq is preemptible on PREEMPT_RT. Without a per-CPU lock in local_bh_disable() there is no guarantee that only one device is transmitting at a time. With preemption and multiple senders it is possible that the per-CPU `recursion' counter gets incremented by different threads and exceeds XMIT_RECURSION_LIMIT leading to a false positive recursion alert. The `more' member is subject to similar problems if set by one thread for one driver and wrongly used by another driver within another thread. Instead of adding a lock to protect the per-CPU variable it is simpler to make xmit per-task. Sending and receiving skbs happens always in thread context anyway. Having a lock to protected the per-CPU counter would block/ serialize two sending threads needlessly. It would also require a recursive lock to ensure that the owner can increment the counter further. Make the softnet_data.xmit a task_struct member on PREEMPT_RT. Add needed wrapper. Cc: Ben Segall <bsegall@google.com> Cc: Daniel Bristot de Oliveira <bristot@redhat.com> Cc: Dietmar Eggemann <dietmar.eggemann@arm.com> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Valentin Schneider <vschneid@redhat.com> Cc: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by:
-
Sebastian Andrzej Siewior authored
brnf_frag_data_storage is a per-CPU variable and relies on disabled BH for its locking. Without per-CPU locking in local_bh_disable() on PREEMPT_RT this data structure requires explicit locking. Add a local_lock_t to the data structure and use local_lock_nested_bh() for locking. This change adds only lockdep coverage and does not alter the functional behaviour for !PREEMPT_RT. Cc: Florian Westphal <fw@strlen.de> Cc: Jozsef Kadlecsik <kadlec@netfilter.org> Cc: Nikolay Aleksandrov <razor@blackwall.org> Cc: Pablo Neira Ayuso <pablo@netfilter.org> Cc: Roopa Prabhu <roopa@nvidia.com> Cc: bridge@lists.linux.dev Cc: coreteam@netfilter.org Signed-off-by:
-
Sebastian Andrzej Siewior authored
ipv4_tcp_sk is a per-CPU variable and relies on disabled BH for its locking. Without per-CPU locking in local_bh_disable() on PREEMPT_RT this data structure requires explicit locking. Make a struct with a sock member (original ipv4_tcp_sk) and a local_lock_t and use local_lock_nested_bh() for locking. This change adds only lockdep coverage and does not alter the functional behaviour for !PREEMPT_RT. Cc: David Ahern <dsahern@kernel.org> Signed-off-by:
-
Sebastian Andrzej Siewior authored
sigpool_scratch is a per-CPU variable and relies on disabled BH for its locking. Without per-CPU locking in local_bh_disable() on PREEMPT_RT this data structure requires explicit locking. Make a struct with a pad member (original sigpool_scratch) and a local_lock_t and use local_lock_nested_bh() for locking. This change adds only lockdep coverage and does not alter the functional behaviour for !PREEMPT_RT. Cc: David Ahern <dsahern@kernel.org> Signed-off-by:
-
Sebastian Andrzej Siewior authored
napi_alloc_cache is a per-CPU variable and relies on disabled BH for its locking. Without per-CPU locking in local_bh_disable() on PREEMPT_RT this data structure requires explicit locking. Add a local_lock_t to the data structure and use local_lock_nested_bh() for locking. This change adds only lockdep coverage and does not alter the functional behaviour for !PREEMPT_RT. Signed-off-by:
-
Sebastian Andrzej Siewior authored
The else condition within __netdev_alloc_frag_align() is an open coded __napi_alloc_frag_align(). Use __napi_alloc_frag_align() instead of open coding it. Move fragsz assignment before page_frag_alloc_align() invocation because __napi_alloc_frag_align() also contains this statement. Signed-off-by:
-
Sebastian Andrzej Siewior authored
Add local_lock_nested_bh() locking. It is based on local_lock_t and the naming follows the preempt_disable_nested() example. For !PREEMPT_RT + !LOCKDEP it is a per-CPU annotation for locking assumptions based on local_bh_disable(). The macro is optimized away during compilation. For !PREEMPT_RT + LOCKDEP the local_lock_nested_bh() is reduced to the usual lock-acquire plus lockdep_assert_in_softirq() - ensuring that BH is disabled. For PREEMPT_RT local_lock_nested_bh() acquires the specified per-CPU lock. It does not disable CPU migration because it relies on local_bh_disable() disabling CPU migration. With LOCKDEP it performans the usual lockdep checks as with !PREEMPT_RT. Due to include hell the softirq check has been moved spinlock.c. The intention is to use this locking in places where locking of a per-CPU variable relies on BH being disabled. Instead of treating disabled bottom halves as a big per-CPU lock, PREEMPT_RT can use this to reduce the locking scope to what actually needs protecting. A side effect is that it also documents the protection scope of the per-CPU variables. Acked-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Sebastian Andrzej Siewior authored
Introduce lock guard definition for local_lock_t. There are no users yet. Acked-by:
-
Lukas Bulwahn authored
Commit 243996d1 ("dt-bindings: net: Convert fsl-fman to yaml") splits the previous dt text file into four yaml files. It adjusts a corresponding file entry in MAINTAINERS from txt to yaml, but this adjustment misses that the file was split and renamed. Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a broken reference. Adjust the file entry to match the four yaml files resulting from this commit above. Signed-off-by:
Lukas Bulwahn <lukas.bulwahn@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 23 Jun, 2024 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queueDavid S. Miller authored
Tony Nguyen says: ==================== ice: prepare representor for SF support Michal Swiatkowski says: This is a series to prepare port representor for supporting also subfunctions. We need correct devlink locking and the possibility to update parent VSI after port representor is created. Refactor how devlink lock is taken to suite the subfunction use case. VSI configuration needs to be done after port representor is created. Port representor needs only allocated VSI. It doesn't need to be configured before. VSI needs to be reconfigured when update function is called. The code for this patchset was split from (too big) patchset [1]. [1] https://lore.kernel.org/netdev/20240213072724.77275-1-michal.swiatkowski@linux.intel.com/ --- Originally from https://lore.kernel.org/netdev/20240605-next-2024-06-03-intel-next-batch-v2-0-39c23963fa78@intel.com/ Changes: - delete ice_repr_get_by_vsi() from header - rephrase commit message in moving devlink locking ==================== Signed-off-by:
-
